National Machinery Exchange
Contact
About
National Machinery Exchange, Inc. has been the worldwide leader in used metalworking equipment since 1934! National Machinery Exchange specializes in purchasing and reselling secondhand ferrous and non-ferrous metalworking equipment. We purchase individual equipment and entire manufacturing plants.National Machinery Exchange has one of the largest inventories of presses, shears, press brakes, tube & pipe mills, tube end finishing equipment, uncoilers/recoilers, slitting lines, cut-to-length lines, roll formers, rolling mills and much more. We are also the foremost dealer for fastener machinery with a large stock of headers, boltmakers, upsetters, nut formers, nail makers, bolt threaders, thread rollers, slotters, forging equipment, and wire machinery.
Products & Services
- Brakes, Press
- Coil Handling/Processing Equipment
- Cut to Length Lines
- Ironworkers
- Presses
- Rollformers
- Rolling Mills
- Shears
Associations & Affiliations
1544 listings in 271 categories
2 High and 4 High Rolling Mills
3 Results
8" Fenn #FRM082, 2Hi/4 Hi hot reversing rolling mill, 10" roll face, 150 Degrees roll temp., 0-50 FPM, 2016
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High and 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fenn
Year: 2016
MANUFACTURER - FENN, YEAR - 2016, SERIAL NUMBER - 53688, FENN MODEL - 082 FRM, DESIGN MATERIAL - 5000 & 6000 SERIES ALUMINUM, MILL DESIGN - 2HI/4HI REVERSING***, CURRENT CONFIGUATION - ...more
Fenn #051, 2/4 Hi reversing rolling mill
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High and 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fenn
Subject to Revisions**, **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**, **ALL ARE SUBJECT TO BUYERS VERIFICATION**.
Mino, 2 Hi/4 Hi Skin Pass Mill, 2300mm diameter x 750mm width, 1000 MPM, coil weight 15 Ton, separation force 360 Ton, 1998
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High and 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mino
Year: 1998
Year of Installation: 1998, Material width: 320 mm to 750 mm, Max Diameter: 2300mm, Thickness: 0.3 mm - 3 mm, Speed: 1000 meters per minute, Winder Block I.D: 500 mm, Coil Weight: 15 ton ...more
2 High Rolling Mills
14 Results
5.5" x 8" I2S Sizing Rolling Mill, single direction, 80 FPM, Hydraulic Screwdown, reconditioned in 2014
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: I2s
5.5" x 8" I2S SIZING MILL (RECONDITIONED IN 2014), Mill Type 2 Hi - Single Direction, Roll Diameter 5.25"max, 4.75"min, Roll Face 8", Roll Material Forged Alloy steel, Roll hardness 64 - 66 ...more
10" x 2-1/2" Fenn, 2-Hi wire flattening mill, water cooled rolls, 75 HP DC GE Kinamatic direct curretn motor
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fenn
-MANUFACTURER: FENN MANUFACTURING COMPANY (USA), -TYPE: 2 HI WIRE FLATTENING ROLLING MILL, -ROLLS, -DIAMETER: 10" (254mm), -ROLL FACE: 2-1/2" (63.5mm) WIDE CARBIDE SHELL INSERTS, MOUNTED ON ...more
10" x 11" Fenn, 2-High cold rolling mill, R to L, .060"-.250" strip thickness, 90 FPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fenn
SUBJECT TO VERIFICATION BY THE PURCHASER.
National Machinery Exchange has 11 more listings in 2 High Rolling Mills.
4 High Rolling Mills
14 Results
2.5" x 16" 3/4" x 8" Ruesch # N2421-B, 4 Hi Reversing Mill, mechanical adj., 400 FPM line speed, Mandrel Uncoiler, Hydraulic Unit
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
MANUFACTURER - RUESCH, TYPE - 4HI REVERSING WORK ROLL DRIVEN, MODEL - N2421-B, SERIAL NUMBER - 5754, SCREWDOWN - MECHANICAL BY INDEPENDENT AC MOTORS, WIDTH RANGE - 2" - 8", WORK ROLLS - ...more
4" x 14" x 18" Ruesch #265, 4 Hi Reversing Rolling Mill w/ Hydraulic Screw Downs, AGC, PLC, DC digital drives, 1980
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
Year: 1980
(3 speed selectable gearbox), Low Speed High Tension Range - 500 fpm & 10,000 pounds tension, Mid Speed Range Mid Tension Range - 1000 fpm & 5000 pounds tension, Hi Speed Low ...more
4" x 14" x 18" Ruesch #265, 4 Hi Reversing Rolling Mill, Fixed Coolant Sprays, Screwdown, Tension Control, 1969
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
Year: 1969
18" RUESCH MDL. 265 4HI REVERSING ROLLING MILL, Manufacturer - Ruesch, Year - 1969, Model Number - 265, Mill Horsepower - 150 HP by Reliance, Winder Horsepower - 100 HP by Reliance, Work ...more
National Machinery Exchange has 11 more listings in 4 High Rolling Mills.
44" United, 2 stand 4-Hi tandem cold rolling mill, 5500 FPM, in ground coil cars
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: 4-High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: United
, -MILL DESIGN - TWO STAND, -MILL STAND CONFIGURATION - 4HI, -DRIVE CONFIGURATION - WORK ROLL DRIVEN (BOTH STANDS), -MATERIAL - COLD ROLLED OR TINPLATE TEMPERED MATERIAL, -TOP MILL SPEED - ...more
10" Kalamazoo #K-10, Abrasive Saw, 19" x 23-1/2" table, mounted on/off switch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Abrasive Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kalamazoo
Model: K-10
TABLE. 19" X 23-1/2", BLADE. 10", MOUNTED ON/OFF SWITCH, 3 HP 208/220/440 VOLT 3 PHASE 60 CYCLE MOTOR.
14" Kalamazoo #K12-14SS, Abrasive Chop Saw, 2.5" Round, 3" Pipe, Saw on stand, One Blade on Saw, ON/OFF Switches
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Abrasive Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kalamazoo
Model: K12-14SS
Kalamazoo K12-14SS Abrasive Chop Saw, Model - K12-14SS, Abrasive Wheel - 14", Capacity - 2.5" Round, 3" Pipe, Motor - 5 HP 230/460 Volt 3 Phase 60 Cycle 3648 RPM., Includes:, Saw Mounted on ...more
20" Kalamazoo #K20PH, Abrasive Chop Saw, 4" solid, 6" shapes, 18" width x 30" D table, 1" arbor
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Abrasive Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kalamazoo
Model: K20PH
MANUFACTURER - KALAMAZOO, MODEL - K20PH, ABRASIVE WHEEL - 20", CAPACITY - 4" SOLID, 6" SHAPES, TABLE - 18" W X 30" D, WHEEL ARBOR - 1", MOTOR - 15 HP, SHIPPING WEIGHT - APPROXIMATELY 700 LBS.
National Machinery Exchange has 1 more listing in Abrasive Saws.
Tepco #2500, air cleaner
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Air Cleaners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tepco
Model: 2500
24" x .12" Jaybird #J15-2412, Air feed w/ pull through 5-roll straightener, 60 SPM, edge guides, pinch rolls
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Air Feeders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Jaybird
AIR FEED WITH PULL THROUGH 5 ROLL STRAIGHTENER, MAXIMUM STOCK WIDTH. 24", MAXIMUM STROKE LENGTH. 12", MAXIMUM STOCK THICKNESS.12", MAXIMUM STROKES/MINUTE. 60, ENTRY EDGE GUIDES AND PINCH ...more
Rapid-Air Stock Feed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Air Feeders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Rapid-Air
Air Press, custom made
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Air Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Alligator Shears
1 Result
Canton #11A, alligator shear, 24" L x 5" D x 1-1/4" thick knives, 8" jaw opening, 456 CPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Alligator Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Canton
Model: 11A
CANTON #11A ALLIGATOR SHEAR, Our stock number: 115686, CAPACITY: 2" SQUARE OR 3/8" X 24 IN MILD STEEL, BUSHINGS: BRONZE BUSHD THROUGHT ON KINGPIN, CRANKSHAFT, COUNTERSHAFT AND PITMAN ARM ...more
Aluminum Scalpers
1 Result
9 Ton, Demag Sack Knoevenagel Aluminum Scalper, 1500mm x 550mm
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Aluminum Scalpers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Demag
1500mm x 550mm Demag Sack Knoevenagel Aluminum Scalper, Make - Demag Sack Knoevenagel, Year - 1995, Material - Aluminum, Power - 250 KW*4P*440V (10 Cutter*20mm Depth), Slab Length - ...more
Aluminum Solution Heat Treating Furnaces
1 Result
Schaefer, approx 6600 lb. Aluminum holding furnace
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
4" x 4" x 1/4" Whitney #664-500, hydraulic shear, 50 ton
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Angle and Bar Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Whitney
Model: 664-500
50 TON WHITNEY MODEL 664-500 HYDRAULIC SHEAR, MAX SIZE 4 X 4 X 1/4, FLAT STOCK 1/4" THICK M.S, UP T0 8", MOTOR, HYDRAULIC UNIT & DUAL PALM BUTTON CONTROLS, WITH OPERATING & ...more
3" x 3" x 3/8" Buffalo #1, Horzontal Bending Rolls, leg in/ leg out
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Angle Bending Rolls
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Buffalo
Model: 1
MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL, MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS, FOUR SET OF ANGLE ROLLS, MISCELANEOUS SPACE PLATES, FOUR SET OD RADIOUS ROLLS, 10 HP MOTOR ...more
3" x 3" x 30" Bolderini #BSA-16M, Bar Stock Roll Feed Angle Bending Roll, tooling
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Angle Bending Rolls
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bolderini
Model: BSA-16M
MANUFACTURER: BOLDERINI, MODEL #: BSA-16M, TYPE: VERTICAL, 3" x 3" x 30" WITH TOOLING, MOTOR AND CONTROLS, INCLUDES:, SKID OF DIES AND STANDS.
Annealing and Brazing and Sintering Furnaces
4 Results
Ebner #B6V6 80/1350, Vertical Bright Anneal Furnace w/Alkaline Strip Cleaning Entry, 16" x 0.070", 8 Steering rolls, 1996
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1996
Ebner Bright Anneal Furnace:, Manufacturer - Ebner, Model - B6V6 80/1350 Vertical Strip Annealer, Year - 1996, Type - Vertical Bright Anneal Strip Annealing line, Min/Max Width Capacity: ...more
Gasmac Car Bottom Batch Type Annealing Oven, 780 Degrees Fahrenheit, 2 Zone, 2 burners
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
SERIAL No. JW020469, TYPE. CAR BOTTOM BATCH TYPE, CAR CAPACITY. 7,200# APPROX, MAX OPPERATING TEMPERATURE. 780 DEGREES FARENHEIT, No. RECIRCULATING FANS. 2, RECIRCULATION. 2 @ 36,500 CFM ...more
Ripoche Roller Hearth Annealing Furnace, 57" W x 57" L x 16" H, 3 Zone, Natural gas, Water cooled, 6 burners, 1200 Degrees Fahrenheit, 1995
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1995
Manufacturer:. Ripoche; France, Year of Manufacture:. 1995, Fuel:. Natural Gas, Type of atmosphere:. H2N2, Number of Zones:. 3, Form of Copper:. Copper Coils, Width of hearth:. 1450mm ...more
National Machinery Exchange has 1 more listing in Annealing and Brazing and Sintering Furnaces.
C.I. Hayes, copper & brass strip annealing line, 12" x .125", 16" ID, 42" OD, 6 FPM, 3 heat zone, 45' passline, cooling, electric heat
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Annealing Lines (Annealers)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ci Hayes
STRIP WIDTH - 1" - 12", COIL WEIGHT - 4,000 LBS., COIL ID/OD - 16/42, STRIP THICKNESS RANGE -.005"-.125", SPEED - 6' per min, HEAT ZONES - 3, HEATING LENGTH - 17', PASSLINE - ...more
C.I. Hayes, copper & brass strip annealing line, 5" x .062", 16" ID, 42" OD, 5 FPM, 2 heat zone, 16' passline, cooling, electric heat
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Annealing Lines (Annealers)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ci Hayes
STRIP WIDTH - 1/2" - 5", COIL WEIGHT - 2,000 LBS., COIL ID/OD - 16/42, STRIP THICKNESS RANGE -.005"-0.062", SPEED - 5' per min, NUMBER OF HEAT ZONES - 2, HEATING LENGTH - 5' ...more
Thermal Basics, copper & brass strip annealing line, 13-1/4" x .125", 16" ID, 42" OD, 10 FPM, 3 heat zone, 49' passline, cooling, electric heat
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Annealing Lines (Annealers)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Thermal Basics
MANUFACTURER - THERMAL BASICS, STRIP WIDTH - 1" - 13 1/4", COIL WEIGHT - 4,000 LBS., COIL ID/OD - 16/42, STRIP THICKNESS RANGE -.005"-.125", SPEED - 10' per min, HEAT ZONES - 3, HEATING ...more
National Machinery Exchange has 1 more listing in Annealing Lines (Annealers).
Arbor Press #5
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Arbor Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Model: 5
Shield Arc Type Sae 300 Welder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Arc Welders
Seller: National Machinery Exchange
Location: Newark, NJ
Ocap Ocatp #203R, blind rivet assembly, 2.4mm - 7.8mm diameter max, 120-280 pieces per minute, 24" vibratory bowl feeders
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Assembly Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ocap
Model: 203R
, RIVET DIAMETER. 2.4mm - 7.8mm MAX, RIVET LENGTH. 4mm - 50mm MAX., NAIL LENGTH. 35mm - 85mm MAX, PRODUCTION RATE. 120-280 PIECES PER MINUTE, DUAL 24" VIBRATORY BOWL FEEDERS, ELECTRICS: 440 ...more
Ocap Ocatp #203R, blind rivet assembly, 2.4mm - 7.8mm diameter max, up to 500 pieces per minute, 21" vibratory bowl feeders
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Assembly Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ocap
Model: 203R
, RIVET DIAMETER. 2.4mm - 7.8mm MAX, RIVET LENGTH. 4mm - 50mm MAX., NAIL LENGTH. 35mm - 85mm MAX, PRODUCTION RATE. 0-500 PIECES PER MINUTE, DUAL 21" VIBRATORY BOWL FEEDERS, 440 VOLTS, 3 PH ...more
Atmosphere Gas Generators and Accessories
1 Result
AFC - Holcroft #EZ-4500, Natural Gas direct fired Endothermic gas generator, 1950 Degrees Fahrenheit, 2016
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Afc
Year: 2016
Our stock number: 115658, AFC-Holcroft EZ-4500 Natural Gas Direct Fired Endothermic Gas Generator, S/N 63827 (New 2016), Max Chamber Temp: 1950F (1066C), Normal Chamber Temp: 1900F (1038C) ...more
No. 1AB Warner & Swasey, automatic bar machine, 2" round bar, 1-4/8" square, 1-3/4" hexagon
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Automatic Bar Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Warner & Swasey
Model: 1AB
, - SPINDLE SPEEDS: 72 TO 2026 RPM, - TURRET FEEDS:.0019" TO.124" IPR, - CUTOFF SLIDE FEEDS:.0005" TO.021" IPR, - CAPACITY: 2" ROUND BAR, 1-3/8" SQUARE, 1-3/4" HEXAGON, - MAXIMUM LENGTH ...more
No. 2AB Warner & Swasey, automatic bar machine, XYCom controller, 3" round bar
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Automatic Bar Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Warner & Swasey
Model: 2AB
, - SPINDLE SPEEDS: 28 TO 1544 RPM, - TURRET FEEDS:.0019" TO.124" IPR, - CUTOFF SLIDE FEEDS:.0015" TO.020" IPR, - CAPACITY: 3" ROUND BAR, - BAR FEED STROKE: 1/8" TO 10", - XYCOM CONTROLLER ...more
Automatic Drilling and Tapping Machines
2 Results
Davenport #10-901, Secondary Operation Drilling and Tapping Machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Davenport
Model: 10-901
THREE UNITS MOUNTED VERTICALLY, TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE., PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED MECHANISM., EACH UNIT HAS A 3" STROKE., BRASS ...more
Standard #10-902, Tool Secondary Operation Drilling and Tapping Machine, 3" stroke, pnuematically powered, hydraulic controlled
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Standard
Model: 10-902
BRAss - ALUMINUM. 1/2" - 20", FEED RATE FORWARD OR BACK (@ 80 PSI). 0 - 150 IPM, FEED RATE FORWARD OR BACK. 0 - 3", SPINDLE SPEEDS WITH 1725 RPMS, WEIGHT. 3,000 LBS, O.A. DIM. 59" X 73" X ...more
Automatic Screw Machines and Chuckers
4 Results
Brown & Sharpe #00, Ultramatic screw machine, 1/2" capacity
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Automatic Screw Machines and Chuckers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brown & Sharpe
Model: 00
1/2" BROWN & SHARPE #00 ULTRAMATIC SCREW MACHINE, MANUFACTURER - BROWN & SHARPE, TYPE - ULTRAMATIC, MODEL NUMBER - 00, CAPACITY - 1/2", TURRET - 6 HOLE.
Brown & Sharpe #00, screw machine, 1/2" capacity, magazine feed system
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Automatic Screw Machines and Chuckers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brown & Sharpe
Model: 00
BROWN & SHARPE, MODEL #00, MAGAZINE FEED SYSTEM.
Brown & Sharpe #00, Ultramatic 2 Screw Machine, magazine feed machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Automatic Screw Machines and Chuckers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brown & Sharpe
Model: 00
BROWN & SHARPE, MODEL# 00, MAGAZINE FEED SYSTEM.
National Machinery Exchange has 1 more listing in Automatic Screw Machines and Chuckers.
Banding Lines and Coil Packaging Lines
5 Results
4000 lb. Ruesch, coil banding line, 48" OD, 1 arm turnstile, power push off, 24" arm length
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Banding Lines and Coil Packaging Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
48" Max OD, 1 Arm Turnstile, Power Push-Off, Hydraulic Raise & Lower For ID Variations, 24" Arm Length, 6" Coil ID, 32" Floor To Top of the Arm, Coil Downlayer, 41" Roll Face x 48" ...more
5000 lb. Slit coil packaging line, 76" OD, 20" or 24" ID, 28" width
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Banding Lines and Coil Packaging Lines
Seller: National Machinery Exchange
Location: Newark, NJ
, SLIT COIL WEIGHT - 15,000# MAX., SLIT COIL WIDTH - 28" MAX., SLIT COIL OUTSIDE DIAMETER - 76" MAX., SLIT COIL INSIDE DIAMETER - 20" or 24", LINE COMPONENTS:, PIVOTING SLIT COIL DOWNENDER ...more
10000 lb. Loopco slit coil packaging line, L to R, 24" width, 72" OD, 16"-20" ID
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Banding Lines and Coil Packaging Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Loopco
MANUFACTURER - LOOPCO, LINE DIRECTION - LEFT to RIGHT, SLIT COIL WEIGHT - 10,000# MAX., SLIT COIL WIDTH - 24" MAX., SLIT COIL OUTSIDE DIAMETER - 72" MAX., SLIT COIL INSIDE DIAMETER - 16" or ...more
National Machinery Exchange has 2 more listings in Banding Lines and Coil Packaging Lines.
AMD #530-2230, Hydraulic Billet Bar Shear w/20' Autofeed, 21' L x 3" bar feed, PLC
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Billet Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Advance
Model: -530-2230
3" ADVANCED MACHINE (ADM) MODEL #530-2230 HYD. BILLET BAR SHEAR W/20' AUTOFEED, Serial: 7905, Model: 530-2230, Bar feed capacity: 21'L X 3", Allen Bradley Panel View 400 PLC ...more
AMD #530-2230, Billet Shear, 21' L x 3" bar feed, PLC, hydraulic system, auto-feed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Billet Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Advance
Model: -530-2230
SERIAL: 7904, Model: 530-2230, Bar feed capacity: 21'L X 3", Allen Bradley Panel View 400 PLC Control Hydraulic system Bar feed system:, auto-feed Lot of tooling, Temporary. Must be ...more
AMD #1000-3030, Hydraulic Billet Shear, 1000 Ton, descrambler, feed table, back gauge, hydraulic unit
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Billet Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Advance
Model: 1000-3030
1000 TON AMD MDL #1000-3030 BAR SHEAR W/ ENTRY TABLE, MANUFACTURER - ADVANCED MACHINE DESIGN COMPANY, MODEL - 1000-3030, MACHINE NUMBER - 7412, TONNAGE - 1000, ROUND CAPACITY - 7 1/8" (1020 ...more
National Machinery Exchange has 1 more listing in Bar and Billet Shears.
Bar and Rod Rolling Mills
4 Results
Danieli Bar Mill, 11 Stands, 270000 Ton/ Yr., horizontal, Round Deformed Bar, 1995
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Rod Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Danieli
Year: 1995
Year: 1995, Production Capacity: 270,000 Tons / Year., Reheating Furnace: 50 Ton / H., Mill Arrangement: Horizontal, Billet Size:120 X 120 / 130x130 / 140x140 / 130x190 X 6000 Mm, Finished ...more
Danieli Steel Mill for Bar and Rebar, 650000 Ton, 1995
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Rod Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Danieli
Year: 1995
DANIELI DC ELECTRIC FURNACE, Shell Diameter: 6000 mm, Maximum Capacity:120 Ton, 100 Ton Pour, Total Volume:106 m3, Tap Type:Ebt (Eccentric Bottom Tap), Electrode Diameter:150mm, Electrode ...more
Morgan Tekisun Sizing Mill, 3-1/2" bar, 13.77" roll, 700 FPM, 1990
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar and Rod Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Morgan
Year: 1990
, TYPE : 2 HORIZONTAL - 1 VERTICAL, MOUNTED ON COMMON BASE, 2 HIGH ON 26.4" CENTERS (670 MM), CAPACITY : 1-3/8" TO 3-1/2" BAR, SPEED : 200 TO 700 FPM, HOUSING : CLOSED TOP (SPECIAL), WELDED ...more
National Machinery Exchange has 1 more listing in Bar and Rod Rolling Mills.
Bar Turners/Peelers
2 Results
Kieserling #WDH50, 11mm to 52mm Bar Peeler
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar Turners/Peelers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kieserling
Model: WDH50
Kieserling #WDHR125, 20-127mm bar finishing cell with peeler & straightener
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar Turners/Peelers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kieserling
Model: WDHR125
1/2" DiAcro #2, manual bender, 9" radius capacity, 1" center pin hole diameter
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Diacro
Model: 2
1" Lubow #ML200, Pneumatic Tube Bender ( air operated, attachment, tooling
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lubow
Model: ML200
AIR OPERATED WIRE BENDER, WITH 1" TUBE BENDER, ATTACHMENT, TOOLING, 5'5" Long X 3' 5" Wide X 3'9" High and weighs 960 lbs.
1" Pines #M-04523, bender, foot pedal switch, pedestal stand controls
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pines
Model: M-04523
TUBE SIZE RANGE OD. UP TO 1", MAXIMUM CAPACITY STEEL TUBING. 1" OD x.065" WALL, MAXIMUM BEND ANGLE - NORMAL TOOLING. 140, MAXIMUM BEND ANGLE - SPECIAL TOOLING. 165, TYPICAL PRODUCTION. 1500 ...more
National Machinery Exchange has 9 more listings in Bar, Pipe and Tube Benders.
Bar, Pipe and Tube Straighteners
15 Results
3/8" Torrington #1819, 12-Roll 2-plane Tube & Rod Straightener, 125" hex or squaring rod, 1/12" diameter x 1" face, 635 FPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrington
Model: 1819
, CAPACITY: TUBE.0625" -.3125" WITH.040" WALL, ROD. 125" HEX OR SQUARE, ROLL SIZE. 1/12" DIA. x 1" FACE, SPEED. 159 - 635 FPM, ROLLS: 12-PLANE, ALL ROLLS DRIVEN, OPERATORS CONTROLS - PUSH ...more
1" Torrington #1821, 12-Roll Straightener, .750" bar, .719" hex, 60000 PSI, L-R
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrington
Model: 1821
MFG - TORRINGTON, MODEL # - 1821, NUMBER OF ROLLS - 12 (6 HORIZONTAL & 6 VERTICAL), TUBE CAPACITY -.375" - 1", BAR CAPACITY -.750", HEX CAPACITY -.719", MAX YIELD - 60,000 PSI, LINE ...more
2" Bronx #BR4, 2-roll Bar Straightener
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Model: BR4
MACHINE # 12556, MANUFACTURER: THE BRONX ENGINEERING CO LTD, TYPE: BR 4, MACHINE # 2582, TYPE STRAIGHTENER: 2 ROLL, CAPACITY SOLIDS: 2-1/4" (57mm) - 0.3937" (10mm), DRIVE MOTORS: (2) 11Kw ...more
National Machinery Exchange has 12 more listings in Bar, Pipe and Tube Straighteners.
Beading and Flanging Trimmers
2 Results
Oberburg Bgd 400/500-v2 Rotary Trimmer, Beading And Thread Rolling Machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Beading and Flanging Trimmers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Oberburg
MANUFACTURER: OBERBURG, MODEL: BGD 400/500-V2, REBUILT: 1998 (OBERBURG), WORK PIECE DIA.: 1.97" TO 5.94", UNTRIMED LENGTH OF WORK PIECDE: 3.15" TO 13.79", MAXIMUM WALL THICKNESS IN MILD ...more
V & O #982, Trimming Machine, 1" diameter x 8" length
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Beading and Flanging Trimmers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: V&o
SUBJECT TO INSPECTION BY PURCHASER.
Bed and Knee Milling Machines - Vertical
6 Results
Bridgeport #J-Head, vertical mill, 9" x42" table, power longitude, 1 -1/2 HP varidrive
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bridgeport
Model: J-HEAD
BRIDGEPORT VERTICAL MILL, J HEAD, POWER LONGITUDE, 9" X 42" TABLE, 1-1/2 HP VARI DRIVE, OH.
Bridgeport #Series-II, milling machine, 11" x58" table, 1.3 HP varidrive, digital read out XY, power table, tracer
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bridgeport
Model: SERIES-II
BRIDGEPORT MILL, Bed area 58" x 11", 1.3 H.P. VARIDRIVE, WITH DIGITAL READOUT XY, POWER TABLE, AND TRACER..
Hurco, vertical milling machine, 9" x42" table, One shot lube, 3 HP vari-speed, Acu-Rite III 2-Axis digital read out
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hurco
Table size. 9" x 42", Maximum weight of workpiece. 750 lbs, Longitudinal table travel. 30", Cross travel. 15", Quill travel. 5", Knee travel. 16.5", Ram travel. 23", Minimum / maximum ...more
National Machinery Exchange has 3 more listings in Bed and Knee Milling Machines - Vertical.
42" outside dimension x 36" H SM Engineering Pit Type Bell Annealing Furnaces, nytrogen/hydrogen, 2 bases/system, 2 furnaces
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bell Type Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sm Engineering
INSIDE MAXIMUM HEIGHT - 36", INSIDE MAXIMUM WIDTH - 42" OD, MAXIMUM TEMPERATURE 1800, CONTROL - 120 KW, 144 AMP, 480 VOLT, HEATING SOURCE - ELECTRICAL COILS, WATER JACKET, COOLING FAN ...more
48" width x 116" H Ebner Hydrogen Bell Anealling System, 1562 Degrees Fahrenheit, 4 bases, 2 furnaces, Siemens control, 1992-1996
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bell Type Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Edner
MANUFACTURER - EBNER, YEAR - 1992-1996, ATMOSPHERE - HYDROGEN, MAX HEIGHT - 116", MAX WIDTH - 48", MAX TEMPERATURE - 1562 DEG. F, MAX LOAD WEIGHT - 40,000 LBS, NUMBER OF BASES - 4, NUMBER ...more
75" diameter x 142" H Ferre Gas Fired Bell Annealing Furnaces, 24 bases, 8 furnaces, 1980, upgrade in 2000
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bell Type Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ferre
Year: 1980
YEAR OF MANUFACTURER:1980, UPGRADES IN 2000, PROTECTIVE ATMOSPHERE: NITROGEN, GAS FIRED BY: NATURAL GAS, NO. OF FURNACES: 8, NO. OF BASE:24, ANNEALING TEMP.: 670-710 C, MAX. COIL DIA.:1900 ...more
National Machinery Exchange has 2 more listings in Bell Type Furnaces.
12" wide, Magnetics #DSC, Inclined Conveyor Belt, 48" height
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Magnetics
MODEL: DSC, WIDTH OF BELT: 12", HEIGHT OF BELT: 48", INCLUDES:, PARTS HOPPER.
16" wide x 115" long, Automated Conveyor Systems, Flat Belt Type, mounted start/stop control, speed control
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
BELT AREA. 16" X 115", WEIGHT. 225 LBS., O.A. DIM. 33" X 124" X 35:, MOUNTED START/STOP CONTROLS, SPEED CONTROLS, 3/4 HP 1750 RPM 90VOLTS 7.6 AMPS MOTOR.
12" x 75" Vangroenweghe Turbogrinder Type #T-300-2K, Belt Grinding Machine, 2 belts, dust collector, 2004
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Belt Grinders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Vangroenweghe
Model: T-300-2K
Year: 2004
VANGROENWEGHE TURBOGRINDER TYPE T-300-2K BELT GRINDING MACHINE, MANUFACTURER - VANGROENWEGHE, MODEL - TURBOGRINDER TYPE T-300-2K, YEAR - 2004, S/N - 0238411, NUMBER OF BELTS - 2, WEIGHT - ...more
The Butcher hydraulic powered billet grinder, 10 HP, traveling dust collector vent
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Billet Grinders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: The Butcher
THE "BUTCHER " HYDRAULIC POWERED BILLET GRINDER, Billet Grinder mounted on rail platform wagon, Platfrom driven by hydraulic motor, "X" axis - length of the billet, Grinding Head "Y" axis ...more
Kaltenbach #HDM-1300, Automatic Saw, 1300mm diameter, 700mm billet cut length, PLC, hydraulic feed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Billet Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kaltenbach
Model: HDM-1300
YEAR 1987, BILLET CUT DIMENSIONS, LENGTH: 4 METERS, MAXIMUM DIAMETER: 350MM, BILLETS CUT LENGTH: 700MM MAXIMUM -350MM MINIMUM, MANUAL AND AUTOMATIC SYSTEM, PLC SIEMENS CONTROLS, BILLET ...more
.090" x 84" Verson Press Line, 500 ton, 108" x 186" bed, 12" stroke, 50 SPM, 75000 lb.
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Blanking Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Verson
, BED SIZE. 102" x 186", STROKE. 12", SHUT HEIGHT. 75", ADJUSTMENT. 20", STROKES PER MINUTE. 10 to 50, MAX COIL WEIGHT. 75,000 POUNDS, MAX LINE SPEED. 300 FEET PER MINUTE, GAUGE RANGE.020" ...more
.105" x 60" EMAG, blanking line, 40000 lb., 20" OD, 72" ID, 150 FPM, R-L, coil car, uncoiler, pinch rolls, coil straightener, shear, stacker
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Blanking Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Emag
Weight Capacity: 30,000Lb, Materia Thickness:.015" -.105", Coil ID: 20", Coil OD: 72", Line Speed: 150 feet per minute, Direction: Right to Left, Entry Coil Car, V-Type Floor Standing ...more
.120" x 84" Warco Press Line, 400 ton, 72" x 96" bed, 18" stroke, 30 SPM, 50000 lb., 200 FPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Blanking Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Warco
, BED SIZE. 72" x 96", STROKE. 18", SHUT HEIGHT. 50", ADJUSTMENT. 10", STROKES PER MINUTE. UP TO 30, MAX COIL WEIGHT. 50,000 POUNDS, MAX LINE SPEED. 200 FEET PER MINUTE, GAUGE RANGE.025" ...more
National Machinery Exchange has 1 more listing in Blanking Lines.
3" Wagner #WGL/30683, Threader, coolant, lube pump
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bolt Threaders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wagner
Model: WGL/30683
O.A. DIM. - 121" X 46" X 58", WEIGHT - 5,465 LBS., MOUNTED COOLANT, LUBRICATION PUMP, 559 VOLT 1150 RPM 5.5 AMP 3 PHASE MOTOR, E.
National #FX-35M, 5 die bolt former, 11mm cutoff diameter, 100mm cutoff length, 166mm stroke, 136mm shut height, 300 PPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Bolt Threaders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: FX-35M
USED NATIONAL MODEL FX-35M 5 DIE BOLT FORMER, NATIONAL BOLT FORMER FX-35M WITH BUSHING CUTOFF AND TRIMMING, NUMBER OF DIES: 5DX5B, MAX. CUTOFF DIA.: 11 MM, MAX. CUTOFF LENGTH: 10-100 MM ...more
Booth and Cabinet Blast Cleaning and Shot Peening
1 Result
48" x 48" x 36" Empire #4848-SCR-9, Wire Air Blast Line, 900 cfm, 12 blast, dust collector
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Empire
Model: 4848-SCR-9
WIRE UNCOILER, HORIZONTAL, EMPIRE PROFINISH CABINET AIRBLAST SYSTEM, Cabinet Model 4848-SCR-9, Number of Blast / Suction Heads.12, Cabinet Dimensions Depth x Width x Height.48" x 48" x 36" ...more
Boring Mills, Vertical, Includes Vtls
10 Results
34" Bullard, vertical boring mill, 38" swing w/side head up, 25-1/2" under rail, swiveling 5 sided indexable turret
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Boring Mills, Vertical, Includes Vtls
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bullard
, TABLE DIAMETER. 34", MAXIMUM SWING WITH SIDE HEAD UP. 38", MAX HEIGHT UNDER RAIL. 25-1/2", VERTICAL TRAVEL OF TURRET HEAD. 24", SIDE HEAD RAM HORIZONTAL TRAVEL. 20", TABLE SPEEDS. (12) ...more
42" Bullard, Vertical Turret Lathe, 25 HP drive motor, drive belts removed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Boring Mills, Vertical, Includes Vtls
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bullard
43" Defum #KNA110/135, vertical turret lathe, 43.3"/51.3" swing, pentagon swivel turret head on rail, 1988
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Boring Mills, Vertical, Includes Vtls
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Defum
Model: KNA110/135
Year: 1988
, TABLE DIAMETER. 43.3", MAX SWING w/ SIDE HEAD IN POSITION. 43.3", MAX SWING w/out SIDE HEAD. 51.3", MAX HEIGHT FACE OF TOOL HOLDER TO TABLE. 37.4", VERTICAL TURRET SLIDE TRAVEL. 23.62" ...more
National Machinery Exchange has 7 more listings in Boring Mills, Vertical, Includes Vtls.
Galland Henning No. 30DC Galland-Henning, Dual Compression Hydraulic Briquetter, PLC control, 12" x 12" x up to 30" bale
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Briquetters
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Galland Henning
Model: 30DC
MODEL. 30DC, BALE SIZE. 12" X 12" X UP TO 30" (VARIABLE LENGTH), BALE WEIGHT. 50 LBS AVERAGE, COMPRESSION PRESS BOX SIZE. 30 CU FT, BALE MATERIAL. STEEL, COPPER, ALUMINUM, ETC ...more
Butt and Flash Welders
3 Results
Alphil Butt Welder, 30 KVA, Solid State Controls
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Butt and Flash Welders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Alphil
30 KVA, 220 VOLTS, 130 AMPS, 60 CYCLE, 4.0 SECONDS VOLTS MAX, 2.1 SECONDS VOLTS MIN, Solid State Controls.
Lors Butt Welder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Butt and Flash Welders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lors
Sterling #42-69 KX8, Butt Welder, 30 KVA
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Butt and Flash Welders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sterling
Model: 42-69
C Frame Hydraulic Press Machines (Gap Frame)
1 Result
Brown Boggs #14LW, C-frame Punch Press, die protection system
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brown Boggs
Model: 14LW
BROWN BOGGS 14LW C-FRAME PUNCH PRESS, DIE PROTECTION SYSTEM.
20000 lb. Bushman #610, C-hook with Stand
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: C-hooks
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bushman
Grieve #AA850 Oven, 9 KW
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cabinet Type Ovens
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Grieve
Model: AA850
Lydon Bros #GPE Oven
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cabinet Type Ovens
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lydon Bros
Model: GPE
8' width x 10' D x 6' H, Natural Gas Fired Forging Furnace, 1500-2150 degrees, Maxon Gas Valving, Upgrade Controls, Exhaust Damper
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Car Bottom Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
8 X 10 X 6ft Natural Gas Fired Forging Furnace, 1500-2150 Degrees Working Temperature, Maxon Gas Valving, Furnace Control Panel, Upgrade Honeywell Burner Controls, Exhaust Damper, Power ...more
10' width x 12' L x 8' H, Natural Gas Fired Forging Furnace, 1500-2150 Degrees, 8' x 6' door, Maxon Gas Valving, 1ea Control Panel
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Car Bottom Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
14' width x 18' L x 10' H, Heatech Natural Gas Fired Forging Furnace, 1500-2200 Degrees, 12' x 8' door, Gas Valving, 2020 Upgraded Controls
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Car Bottom Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Heatech
Heatech 14 X 18 X 10ft Natural Gas Fired Forging Furnace, 1500-2200 Degrees Working Temperature, 12 X 8ft Door, Gas Valving, 2020 Upgraded Controls, Burners by Heatec, Power 480/3/60, Unit ...more
National Machinery Exchange has 1 more listing in Car Bottom Furnaces.
Carbide, Friction and Cold Saws
2 Results
14" Dake #COBRA-350AX, Saw, 3400 RPM, 7" vise opening, 6-1/4" feeder vise opening, 23" feeder length, 8 blades
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Carbide, Friction and Cold Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dake
Model: COBRA-350AX
MAXIMUM BLADE DIAMETER. (14"), SPINDLE SPEEDS. 1700/3400 R.P.M., MAXIMUM VISE OPENING. 7", MAXIMUM FEEDER VISE OPENING. 6-1/4", INDEXING LENGTH OF FEEDER (ONE PASS). 23", MAXIMUM OF ...more
24" x 8" Metlsaw #CS216-T8, non-ferrous precision cold saw, 12' back gauge, 500 FPM, 30 HP
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Carbide, Friction and Cold Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Metlsaw
Model: CS216-T8
MANUFACTURER - METLSAW, MODEL - CS216-T8, TYPE - ALUMINUM PROFILE EXTRUSION SAW, CAPACITY - 24" W X 8" H, CONTROLS - ALLEN BRADLEY TOUCH SCREEN, BACKGAUGE - 12', CUT LENGTH RANGE - " - ...more
Cavity Die Fluid Forming Presses
1 Result
7252 Ton, Avure (Asea) #QRF-40, Quintus Fluid Cell Forming Press, 38 MN Capacity, 29.92" blank diameter, 13.98" draw depth, 10877 PSI
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cavity Die Fluid Forming Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Avure
Model: QRF-40
, CAPACITY. 38 MN FLUID FORM UNIT: O = 800 mm, NOMINAL DIAMETER. 30.63" (778 mm), OUTER DIAMETER. 44.09448" (1120 mm), HEIGHT (UNLOADED). 34.80" (884 mm), MAXIMUM RECOMMENDED BLANK ...more
Centrifuges
1 Result
30" Barrett #1100-E, extractor centrifuge chip spinner wringer, 900 RPM, 10 HP
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Centrifuges
Seller: National Machinery Exchange
Location: Newark, NJ
Model: 1100-E
, SERIAL. 110122-SE, MODEL. 1100-SE, CHIP PAN DIAMETER. 30", CHIP PAN DEPTH. 14", CHIP PAN CAPACITY (CUBIC FEET). 4.25, CHIP PAN CAPACITY (BUSHELS). 3.5, MAXIMUM LOADS PER HOUR. 15, HOURLY ...more
Fa Walsh 6" F.A. Walsh & Sons Chain Conveyor, 8" entry, 51" discharge
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fa Walsh
ENTRY. 8", DISCHARGE. 51", WIDTH. 6", WEIGHT. 175 LBS., O.A. DIM. 16" X 70" X 51".
6" Chain Conveyor, 12" entry, 60" discharge, mounted on/off switch, Follow Rest Control
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
ENTRY. 12", DISCHARGE. 60", WIDTH. 6", O.A. DIM. 36" X 83" X 78", MOUNTED ON/OFF SWITCH, FORWARD/REVERSE CONTROLS, 1/2 HP 1725 RPM 115/230 VOLTS, 8.4/4.2 AMPS.
Green Chain Conveyor, 3/4 HP, 208/230/460 V.
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
3/4 HP 208/230/460 VOLT 3 PHASE 3.2/1.5 AMPS MOTOR, DIMENSIONS: 202" X 58" X 6", E.
Chain Link Fence Machines
3 Results
Bergandi #WWVR0511, 6' Flat Top Welded Selvage Chain Link Weaving Machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Link Fence Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bergandi
Model: WWVR0511
S/N 1846YA06436, NEW 2005/REFURBISHED BY BERGANDI IN 2011 (PHOTOS SHOW MACHINE WHEN IN FACTORY), CAPABILITIES, FABRIC HEIGHT SELECTIONS RANGING FROM 3' TO 8', PRODUCES STANDARD 2" ...more
Wafios #DF-41, chain link fence weaving machine, 13' weaving width, 3/4" - 4" mesh width, .047"-.196" wire diameter
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Link Fence Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wafios
Model: DF-41
WAFIOS MODEL DF-41 CHAIN LINK FENCE, WEAVING MACHINE, - HYDRAULICALLY DRIVEN PRODUCING DOUBLE SPIRAL (TWIN HELIX), - KNUCKLING TWISTING BOTH ENDS, - MAXIMUM WEAVING WIDTH: 13 FT. (4M), - ...more
Vitari #MG3, Fence Making Machine, 2011
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chain Link Fence Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Model: MG3
Year: 2011
VITARY FENCE MAKING MACHINE, MODEL # MG-3, YEAR 2011, WIRE GAUGE. 1.5 - 3.4 mm, MESH DIMENSION. 25 - 75 mm, THEORETICAL OUTPUT. 290 (50m X 2m), WIRE NETING. 2 METERS, POWER. 13 KW.
Cold Shot #ACWC-060-EM-DR-IND-5 Chiller
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Chillers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Cold Shot
Model: ACWC-060-EM-DR-IND-5
CNC Beam/Drill Lines
1 Result
Ficep #Excaliber-1201-DE, single spindle CNC beam drill line, 60' table, 25 HP, 2019
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Beam/Drill Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ficep
Model: EXCALIBER-1201-DE
Year: 2019
, 60' Table, HP: 25, RPM Range: 170 to 3000, Max. Hole Size: 1-11/16", Max. Section Depth: 47", Diameters per head w/Tool Changer: 6, Will Drill & Tap (with proper tools), Will ...more
CNC Horizontal Spindle Surface Grinders
1 Result
Delta Surface Grinder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Delta
Trumpf #TruDisk-2001 Laser, 1030nm, 2000 watt, 4mm mrad
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Lasers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Trumpf
Model: TRUDISK-2001
Trumpf TruDisk 2001 Laser, Wavelength of Laser Light: 1030 nm, Minimum Laser Power: 80 W, Maximum Laser Power: 2000 W, Beam Parameter Product: 4 mm mrad.
Froriep CNC Vertical Turret Lathe, 63", dual arms, 45 KW drive motor, retrofitted by Viking in 2006
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Lathes and Turning Centers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Froriep
HNK Machine Tool Co. #NT-10/12F, 1 Meter CNC Vertical Turret Lathe, Fanuc, 12 Position ATC, 2007
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Lathes and Turning Centers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hnk
Model: NT-10/12F
Year: 2007
HNK Machine Tool Co. #NT-16/20, CNC Vertical Turret Lathe, 63" /78", Fanuc, ATC, 45 KW Drive Motor, 2005
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Lathes and Turning Centers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hnk
Model: NT-16/20
Year: 2005
National Machinery Exchange has 4 more listings in CNC Lathes and Turning Centers.
CNC Plasma Cutting Systems (Flame Cutters)
2 Results
Ajan #Precision, Plasma Cutting Machine, CNC, 5' x 20' table, 2012
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ajan
Model: PRECISION
Year: 2012
TABLE SIZE 5' x 20', POWER CONSUMPTION 260 amp, OPTIONS /, DRY TABLE, DUST COLLECTOR SYSTEM WITH BAG HOUSE, SAFTEY CABLE, 260 AMP PRECISION POWER SUPPLY, OVERHEAD CRANE HANDELING ...more
Esab #COMBIREX-DX3000, gantry style plasma cutting machine, 5' 6" x 21' 6", 3-Axis, 20' table, 1000 IPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Esab
Model: COMBIREX-DX3000
5' 6" x 21'6" ESAB MODEL #COMBIREX DX3000 GANTRY STYLE PLASMA CUTTING MACHINE, MODEL. COMBIREX DZ3000, 3- AXIS GANTRY STYLE. YES, RACK AND PINION DRIVE SYSTEM. YES, MACHINE SPEEDS. ...more
CNC Turret Punch Press Machine
1 Result
22 Ton, Amada #Vipros-225, CNC turret punch, 31 station turret, 50" x 50" sheet, Fanuc 18P, automatic repositioning & indexing, 1997
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: CNC Turret Punch Press Machine
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Amada
Model: VIPROS-225
Year: 1997
(1) Used Amada 255 CNC Turret punch, Year: 1997, ew/Amada Fanuc 18P CNC Control, 31 Station Turret, Auto Repositioning, Auto Indexing (3), 22 Ton Capacity, 50" x 50" Sheet size, minimum ...more
Selmers ID/OD coating facility, cleaning & coating, 100' pipe conveyor, 2019
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coating Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Selmers
Year: 2019
SELMERS INSIDE DIAMETER & WHEELABRATOR/GEMA OUTSIDE DIAMETER PIPE, COATING FACILITY, SELMERS INSIDE DIAMETER COATING FACILITY:, PURCHASED NEW IN 2019, THE SELMERS INSIDE DIAMETER ...more
15000 lb. Revolvator, L- shaped Coil Car, 68" wide, 57" deep, V to floor 8.5"
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cars
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Revolvator
Mfg - Revolvator, S/N - 284PS08, Model - 1964, Capacity - 15,000 Lbs, 68" Wide, 57" Deep, V to Floor 8.5".
20000 lb. (est) Yoder, L-shaped Coil Car, 41" width, 9" floor to bottom base of V, hydraulic unit, push button Control
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cars
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Yoder
20,000 LBS CAPACITY (EST) YODER L-SHAPED COIL CAR, MANUFACTURER - YODER, TYPE - L-SHAPED, CAPACITY - 20,000 Lbs ESTIMATED, WIDTH - 41", FLOOR TO BOTTOM BASE OF V - 9", DIMENSIONS - 6' ...more
30000 lb. Paxson, L Shaped Coil Car, 6" bore, 18" stroke, 3.5" Cam followers, 20" bottom of V to floor, self contained hydraulics
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cars
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Paxson
30,000# PAXSON L SHAPED COIL CAR, 6" BORE, 18" STROKE, 3.5" CAM FOLLOWERS, 20" BOTTOM OF V TO FLOOR, -, SELF CONTAINED HYDRAULICS, ELEVATING, DIMENSIONS 96" X 96" X 76".
National Machinery Exchange has 2 more listings in Coil Cars.
2500 lb. Perfecto #54-10CC, Coil Cradle, 10" width
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cradles
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Perfecto
Model: 54-10CC
Coil Cradles and Straighteners
3 Results
8000 lb. Littell #G680-40, Combination Coil Cradle & Straightener, 48" outside dimension, 40" width, 7-roll straightener
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cradles and Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Littell
Model: G680-40
10000 lb. Regal #3277-CC-CSF-48, Combination Coil Cradle & Straightener, 60" outside dimension, 48" width, 80 FPM, 7-roll straightener
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cradles and Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Regal
Model: 3277-CC-CSF-48
U.S. Multi Roll Straightening Cradle
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Cradles and Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: U.S.
10" x .125" Iron Bay #MP-22, Coil End Joiner, shear on portable cart, tigtorch control, air operated
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil End Joiners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Iron Bay
Model: MP-22
CAPACITY: 10" WIDE x.125" THICK, (SHEAR ON PORTABLE CART CAPACITY), - TORCH TRAVEL VIA ELECTRIC MOTOR, - TIGTORCH CONTROLS, - GAS PRESSURE GAUGES, - MANUAL CLAMPING, - AIR OPERATED, WITH ...more
Coil Handling - Miscellaneous
6 Results
Coil Coating Line, Fata Hunter, 51.25" width, 200 FPM, 2002, New
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Handling - Miscellaneous
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fata Hunter
Model: COIL COATING LINE
Year: 2002
are subject to verification by the purchaser.
Coil Coating Line, 62" width, 2-coat, 300 FPM, w/ Brand New Components, Refurbished
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Handling - Miscellaneous
Seller: National Machinery Exchange
Location: Newark, NJ
Model: COIL COATING LINE
, Strip Width = 62" (1575 mm), Strip Thickness =.010 -.050" (0.25 - 1.27 mm), Material = aluminum, mild steel, galvanized, etc., Line Speed = 300 fpm (91.5 mpm), Coil ID - 16 & 20" (406 ...more
Coil Coating Line, 60" width, 2-coat, 2-bake, 100000 Tons/Yr., 62 MPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Handling - Miscellaneous
Seller: National Machinery Exchange
Location: Newark, NJ
Model: COIL COATING LINE
, TONS - 100,000 TONS/YEAR, MAXIMUM LINE SPEED - 62 METER/MIN, WIDTH - 600-1500mm, THICKNESS - 0.35mm-1.7mm, LENGTH OF LINE - 153 meters, STRIP LENGTH IN LINE - 480 meter, COIL WEIGHT - 15 ...more
National Machinery Exchange has 3 more listings in Coil Handling - Miscellaneous.
Coil Reels and Straighteners (Combination)
1 Result
10000 lb. Littell #620D-5PD, Continuous Straightener and Uncoiler, .187" width x 18" thickness
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Littell
Model: 620D-5PD
SERIAL. 56910-55, MODEL. 620D-5PD, THICKNESS CAPACITY.187", WIDTH. 18", CRADLE CAPACITY. 10,000 LBS, SERIAL. 56910-55, MODEL. C100, OUTSIDE DIAMETER. 52", WIDTH. 20".
Coil to Coil Grinding Line
1 Result
Herr Voss / Hill Acme Stainless Steel 62" Coil To Coil Wet Grinding
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil to Coil Grinding Line
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herr Voss
MATERIAL. Stainless Steel Coil, MAX COIL WEIGHT. 40 TON (80,000#), MAX MATERIAL WIDTH. 16" to 62" (406 mm to 1575mm), MAX MATERIAL THICKNESS. 0.018" to 0.165" (0.457mm to 4.191mm), COIL ID. ...more
30 Ton, Coil Transfer Car, 60000 lb., 3 Stage Battery Operated On Track, 180" x 60"
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Transfer Cars
Seller: National Machinery Exchange
Location: Newark, NJ
Coil Rewind, 1500mm x 20 Ton, L-R, coil car, uncoiler, pinch roll, recoiler, pulpit control
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Winders
Seller: National Machinery Exchange
Location: Newark, NJ
LINE DIRECTION.RIGHT TO LEFT, "L" ENTRY COIL CAR, Travel on Rails, UNCOILER, Snubber Roll, Max. Coil Diameter.1400mm, Disc Brake, Traverse, Hydraulic Operation, Leafs, PINCH ROLLS ...more
Coil Winding / Spring Machine, Vari Speed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Winders
Seller: National Machinery Exchange
Location: Newark, NJ
26" Coil rewind line, includes uncoiler, peeler, pinch roll, slitting head, (2) scrap winders, recoilers, more
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coil Winders
Seller: National Machinery Exchange
Location: Newark, NJ
CONSISTING OF:, - UNCOILER, - PEELER, - PINCH ROLL, - SLITTING HEAD, - (2) SCRAP WINDERS, - INSPECTION TABLE, - RECOILERS, - CONTROLS.
1/8" National, High Speed DSSD Cold Header, 1-1/4" blank, 450 PPM, 3/4" under head, .125" L x 3' W, 1960
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Year: 1960
YEAR. 1960, PPM. 450, MAX BLANK LENGTH. 1-1/4", MIN BLANK LENGTH. 1/4", MAX UNDER HEAD. 3/4", HP. 5, L x W. 6' X 3', WEIGHT. 3,200#.
1/8" Toggle Header
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
1/4" Carlo Salvi #RF/ML, Semi Tubular Cold Header, 2" shank, 2-1/2" cutoff, 250 PPM, 1975
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Carlo Salvi
Model: RF/ML
Year: 1975
Carlo Salvi Model RF/ML Semi Tubular Cold Header, Built 1975, 1/4" Cutoff Diameter, 2" Shank Length, 2 1/2" Cutoff Length, 250 Pieces Per Minute, AC Motor and Controls, Weight 7000 Lbs..
National Machinery Exchange has 11 more listings in Cold Headers.
11" x 45" x 45" SMS Demag, 6Hi Reversing Cold Rolling Mill, coolant, PLC, 2002, modernization in 2010
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Year: 2002
TYPE:6-HI, BUILT:2002, MODERNIZATION IN 2010, ROLLED MATERIAL:CARBON STEEL SAE1006, S235-S550, C45-C75, IF, STRIP WIDTH MAX.: 1150 MM, THICKNESS:IN 3.5 MM OUT 0.30 - 2.5 MM, SPEED MAX.: ...more
56" Hitachi-Seiki, 5 stand 6 Hi continuous tandem cold rolling mill
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hitachi-Seiki
, MILL ENTRY CONFIGURATION, Entry Speed, design rated for 869 FPM, Bridle top speed increased to 970 FPM, Bridle #4 & Steering Unit, (2) IMS Thickness Gauges (Installed 2021), (1) ...more
Hitachi-Seiki, 6 Hi cold rolling mill, reversing, Automatic Gauge Control, 1990-2022
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hitachi-Seiki
Our stock number: 115587, 6 HI HITACHI COLD ROLLING MILL, REVERSING, YEAR: 1990 -2022, MATERIAL STAINLESS STEEL, CARBON STEEL, ALLOYS, THICKNESS RANGE-.0.05mm~3.0mm, STRIP ...more
National Machinery Exchange has 1 more listing in Cold Roll Mills.
Schumag #KZ-R-IV-B/450-40, Combined Drawing Machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Combined Drawing Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schumag
Model: KZ-R-IV-B/450-40
Schumag #KZ-RP-0B, Combined Drawing Machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Combined Drawing Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schumag
Model: KZ-RP-0B
Type: KZ - RP 0B, Manufacturer: Schumag, Range:, Round Dia. 2 mm - O8 mm, Tube Dia. 2 mm - O16 mm, Square 7 mm max., Hexagon 8 mm max., Pull Force: 2 ton, Speed : 100 m/1', Line ...more
Louis Small #CT75000, Hydraulic Compression Tester, 12" stroke, 12" distance piston, 15" lower platen adj.
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Compression Testers
Seller: National Machinery Exchange
Location: Newark, NJ
Model: CT75000
, STROKE OF DOWN MOVING PISTON: 12", DISTANCE PISTON RETRACTED TO LOWER PLATEN: 12", LOWER PLATEN SIZE: 24-1/2" LR x 24-1/2" FB x 2-1/4" THICK, LOWER PLATEN ADJUSTMENT: 15" (MANUAL) ...more
Continuous Casting Machines
1 Result
Ald Vacuum Technologies & Cyro Technologies heliuym recovery system, 2016
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Continuous Casting Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ald Vacuum
Year: 2016
, Manufacturer: ALD Vacuum Technologies & Cryo Technologies Helium Recovery, System, Year of Manufacture - 2016, Material: Titanium Alloy / Used for (Titanium Aluminide Alloy) ...more
Conveyor and Pass Through Parts Washer
4 Results
Ransohoff, pass through parts washer, serial #H25521
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyor and Pass Through Parts Washer
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ransohoff
Sakamura Washer Parts Washer with Conveyor and Control Panel
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyor and Pass Through Parts Washer
Seller: National Machinery Exchange
Location: Newark, NJ
MOUNTED START/STOP, CONVEYOR JOG, WWF INVERTER.
Sakamura Parts Washer with Electrical Panel and Chain Conveyor,
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyor and Pass Through Parts Washer
Seller: National Machinery Exchange
Location: Newark, NJ
CHAIN CONVEYOR, DIMENSIONS: 168" X 57" X 8", ELECTRICAL PANEL.
National Machinery Exchange has 1 more listing in Conveyor and Pass Through Parts Washer.
8" width, JN Machinery Corp, Belt Driven Furnace
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyor Belt Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Jn Machinery
8" JN MACHINERY CORP BELT DRIVEN FURNACE.
Conveyor Continuous / Spinner Hanger, Blast Cleaning and Shot Peening
2 Results
Gietart Shot Blasting Line, 78" x 2" x 20000 lb., entry roller conveyor, 2002
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Gietart
Year: 2002
Manufacturer: Gietart Holland, Year: 2002, Min. Thickness: 5mm, Max Thickness: 50mm, Max Width: 2000mm, Max Weight: 10 Ton, Complete Line with the Following Components:, Entry Roller ...more
Wheelabrator Shot Blast Wheels & Motors, 4 wheels, 40 HP
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wheelabrator
WHEELS WITH MOTORS. 4, MOTOR HORSEPOWER. 40, PRICE IS PER WHEEL/MOTOR.
Gasdenro #TEC-315, Through Type Electric Stress Relief Oven w/digital Control, 16 KW, 12.5" belt width, Wire Mesh
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyorized Ovens
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Gasdenro
Model: TEC-315
GASDENRO TEC-315 ELECTRIC STRESS RELIEF OVEN, MANUFACTURER - GASDENRO, MODEL NUMBER - TEC-315, SERIAL NUMBER - 3807, TYPE - ELECETRIC STRESS RELIEF OVEN, TEMPERATURE CONTROL - DIGIITAL ...more
Pyromaitre #Pyro-10, Conveyor Oven, 2 hp, conveyor 10" wide, 800 F
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyorized Ovens
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pyromaitre
Model: PYRO-10
Pyromaitre #Pyro-30 Conveyor Oven, 3 hp, conveyor 12" wide, 800 F
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Conveyorized Ovens
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pyromaitre
Model: PYRO-30
SN- 001002, 3 hp, Conveyor 12" Wide, Max temp- 800 F, 230V/ 3ph.
Coordinate Measuring Machines (CMM)
2 Results
Brown & Sharpe #Xcel-15-30-10, coordinate measuring machine, 14' x 6.5' Granite Table, Renishaw PH10M Probe, DEA Power Controller
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coordinate Measuring Machines (CMM)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brown & Sharpe
Model: XCEL-15-30-10
Mitutoyo #Mach-3A-653, high speed, in-line coordinate measuring machine, horizontal spindle, 23.6" x19.7" x11.8" measuring range, 2013
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Coordinate Measuring Machines (CMM)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mitutoyo
Model: MACH-3A-653
Year: 2013
Our stock number: 115648, Mitutoyo MACH-3A 653 High-Speed, Horizontal Spindle Type, In-Line Coordinate Measuring Machine, S/N 30224311 (New 2013; Last Calibrated August 2022), 23.6" x 19.7" ...more
Vulcan Brehm, tube cutter
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut Off Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Vulcan
VULCAN BREHM TUBE CUTTER.
18 Ton, Tishken CO-6-24-18, Cut Off Press, between post 10" x 20" Air Clutch, 5 hp
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-off Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
, 18 Ton Tishken Cut Off Press Model: CO-6-24-18, Serial: 16305-1276, Capacity: 18 ton, Distance Between Posts: 10" x 20" Air Clutch, Motor: 5 HP.
20 Ton, MV Machine Works, 2-post Cut-off Press, 3 stroke, 2" post diameter, 12" x 18" die, 12" between post
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-off Presses
Seller: National Machinery Exchange
Location: Newark, NJ
, Tonnage (Approximate): 20, Stroke: 3", Post Diameter: 2", Die Area: 12" x 18", Distance Between Posts: 12", Maximum Width of Cut: 5-1/2", Push buttons, Adjustable Base, WICHITA Clutch ...more
25 Ton, Yoder Model #P25, Cutoff Machine, 0.25" squaring, 150 FPM, 100 SPM, 2 -3/4" stroke, air clutch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-off Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Yoder
Model: P25
, CUTTING CAPACITY, MAXIMUM SECTION AREA, MILD STEEL, DOUBLE SHEAR DIE, (DEPENDENT UPON SHAPE OF SECTION). 0.25" SQ., MAXIMUM TUBE SIZE (O.D. x THICKNESS). 1-1/4" x.050", MAXIMUM STOCK ...more
National Machinery Exchange has 6 more listings in Cut-off Presses.
24" x .06" Dahlstrom, Cut To Length Line, 5000 lb., L-R, coil car/ upender, uncoiler, coil straightener, hump table
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dahlstrom
DAHLSTROM 24" CUT TO LENGTH LINE, LINE DIRECTION LEFT TO RIGHT, CAPACITY.24" WIDTH X 0.062", COIL WEIGHT.5000 #, LINE CONFIGURATION, COIL CAR / UPENDER, RECEIVING ROLLER TABLE ...more
36" x .065" Red Bud, cut to length line, 10000 lb., 60" coil outside dimension, 9"-120" finished length, +/- 0.015" length tolerance
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Red Bud
42" x .075" Dallas, Cut To Length Line, 7000 lb., payoff reel, 7-roll flattener, grip feeder, power shear
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dallas
National Machinery Exchange has 16 more listings in Cut-to-length Lines.
3-1/8" Wagner #200, Cutoff Saw, 12-1/2" blade diameter, 1200 FPM, entry feed table, chip conveyor, exit hopper, 1979
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cutoff Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wagner
Model: 200
Year: 1979
WAGNER MODEL 200 CUTOFF SAW, MANUFACTURER - WAGNER, MODEL NUMBER - 200, YEAR - 1979, TYPE - CIRCULAR COLD SAW, BLADE DIAMETER -8-1/4" OR 12-1/2" BLADE, CURRENT BLADE - 11", CUTTING SPEED ...more
Metalcut #12R.H. Bar / Billet Cut Off Saw
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Cutoff Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Metalcut
Model: 12R.H.
12" METALCUT MODEL 12RH HIGH SPEED AUTOMATIC CARBIDE BILLET COLD SAW, MODEL. 12" RH, NEW. 1973, CAPACITY - ROUNDS. 12", BLADE DIAMETER. 24" TO 40", BLADE SPEEDS. VARIABLE, 200 TO 600 RPM ...more
Gauer #6H20NC, Thru-feed Coil Strip Edge Deburring Machine, 20" x .125", 125 FPM vari-speed
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Deburring Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Gauer
Model: 6H20NC
WIDTH RANGE. 5/8" TO 20", THICKNESS RANGE. 20 GA. (.0344") TO 11 GA (.125"), MATERIAL: COLD OR HOT ROLLED STEEL, STAINLESS STEEL, ALUMINUM, COPPER, AND BRASS, SPEED. UP TO 125 FT/MIN ...more
Julius #UNO80, Strip Edging/deburring Machine, 1410 RPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Deburring Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Julius
Model: UNO80
JULIUS MDL. UNO 80 STRIP EDGING/DEBURRING MACHINE, MANUFACTURER. JULIUS, TYPE. EDGER, MODEL NUMBER.UNO 80, NUMBER OF ROLL/TOOL POSITIONS. 6 (3 ON EACH SIDE), ELD HP motor, 230-460 vac ...more
Pyrotek Snif #SP-60/4HBF, degassing unit, 4 heating elements, 60000 lb/hr refining, 1600 lb. static, new, 2015
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Degassing Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pyrotek
Model: SP-60/4HBF
Year: 2015
PYROTEK SNIF SP-60HBF DEGASSING FURNACE SHELL & LINER, NEW 2015, MANUFACTURER - PYROTEK, CONDITION - COMPLETELY RELINED, TYPE - SNIF SP-60/4HBF-2197701 SHELL & LINER, S/N - ...more
500 Ton, DCP, cold chamber die cast machine, 2016
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Die Casting Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dcp
Year: 2016
500 Ton, Toyo, cold chamber die cast machine, 2009
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Die Casting Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Toyo
Year: 2009
500 Ton, UBE, cold chamber die cast machine
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Die Casting Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ube
Die Tryout and Spotting Presses
1 Result
100 Ton, Beckwood FEN889 #4P100F75P4092, Four Post Hydraulic Spotting Press, 24" stroke, 38" shut height, 62" daylight
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Die Tryout and Spotting Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Beckwood
Model: 4P100F75P4092
Double Action Toggle Press Machines
14 Results
120/80 Ton, Bliss #3-1/2B, toggle double action press, 15.5"/10" stroke, 28"/26" Shut Height, 25" x 28" bed, air clutch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double Action Toggle Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: 3-1/2B
STROKE OF PLUNGER. 15-1/2", STROKE OF BLANKHOLDER. 10", SHUTHEIGHT OF PLUNGER. 28", SHUTHEIGHT OF BLANKHOLDER. 26", BED AREA.(LR X FB). 25" X 28", RAM AREA.(LR X FB). 19-3/4" X 20-1/4" ...more
120/80 Ton, Bliss #3-1/2B, SC toggle press, 15.5"/10" plunger/blank stroke, 28"/26" Shut Height, 25" x 28" bed, air clutch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double Action Toggle Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: 3-1/2B
STROKE OF PLUNGER. 15-1/2", STROKE OF BLANKHOLDER. 10, SHUTHEIGHT OF PLUNGER. 28", SHUTHEIGHT OF BLANKHOLDER. 26", BED AREA.(LR X FB). 25" X 28", RAM AREA.(LR X FB). 20" X 20", BOLSTER ...more
120/80 Ton, Bliss #3-1/2C, straight side single crank toggle press, 20"/9" stroke, 26"/24" die space, 25" x 28" bed, 15 SPM
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double Action Toggle Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: 3-1/2C
RATED CAPACITIES:, PLUNGER BLANKHOLDER, TONS. 120 80, STROKE. 20" 9", DIE SPACE. 26" 24", BED AREA (L-R) X (F-B). 25" X 28", RAM AREA (L-R) X (F-B). 20" X 20", DISTANCE BETWEEN UPRIGHTS. ...more
National Machinery Exchange has 11 more listings in Double Action Toggle Press Machines.
Double Cranked Back Gear OBI Press Machines
2 Results
150 Ton, Bliss #C2-150, Geared OBI Press, 8" stroke, 22" shut height, 84" x 30" bed, 71" x 24" RAM, 40 SPM, air clutch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: C2-150
150 TON BLISS C2-150 GAP FRAME PRESS, MANUFACTURER - BLISS, TYPE - C2-150, SERIAL NUMBER - H68001, CAPACITY - 150 TON, STROKE - 8", DIE SPACE - 22 ", BOLSTER - 4 ", BED AREA L -R - 84", BED ...more
150 Ton, Bliss #C2-150, Geared OBI Press, 8" stroke, 22" shut height, 84" x 30" bed, 71" x 24" RAM, 40 SPM, air clutch
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: C2-150
150 TON BLISS C2-150 GAP FRAME PRESS, MANUFACTURER - BLISS, TYPE - C2-150, SERIAL NUMBER - H68000, CAPACITY - 150 TON, STROKE - 8", DIE SPACE - 22 ", BOLSTER - 4 ", BED AREA L -R - 84", BED ...more
Double End Horizontal Grinders
3 Results
Dayton Double Grinder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double End Horizontal Grinders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dayton
Wafios #MSD, 10" Double End Grinder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double End Horizontal Grinders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wafios
Model: MSD
EACH HEAD 10" DIA. GRINDING WHEELS, OVERALL SIZE: 46" L x 30" W x 66" H.
Wafios #MSE.500, 14" & 17" Double End Grinder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double End Horizontal Grinders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wafios
Model: MSE.500
TWO DIFFERENT SIZE GRINDING STONES., SIZE #1. 14" DIA, SIZE #2. 17" DIA, DRIVE: 1.5 KW, 220/380V, 50CYC, 965 RPM, OVERALL SIZE: 37" L x 32" W x 50" H.
Double or Triple Action Presses
1 Result
4000 Ton, Lake Erie, Double Action Hydraulic Press, 168" die space, 180" ram stroke, 48" ejector stroke
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Double or Triple Action Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Erie
Capacity: 4000 TONS, Min die space: 48", Max die space: 168", Main ram stroke: 180", Ejector stroke: 48", Distance between columns: 92" F-B, Distance between columns: 160" R-L.
30000 lb. BWM Industrial Automation Draw Bench, 25' draw length, single chain, single die, single pull
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Draw Benches
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bwm
***, SINGLE CHAIN, SINGLE DIE, SINGLE PULL DRAW BENCH, LIKE NEW CONDITION, CAPACITY, DESIGNED FOR HIGH ALLOY TUBE, DRAWN LENGTH: 7.6 M (25 FT.), 30,000 LB. OVERALL LOAD CAPACITY, CARRIAGE ...more
36000 lb. Draw Bench Chain for Aetna Staddard Draw Bench, 4 rolls, 125' roll, new
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Draw Benches
Seller: National Machinery Exchange
Location: Newark, NJ
New 36,000 lbs draw bench chain for aetna standard draw bench, Type - designed to fit aetna standard 36,000 lbs draw bench, Number of rolls 4, Length of each roll - 125', This chain was ...more
50000 lb. Brookes/Farmer Norton, Drawbench, single chain w/integral push pointer, 36' draw length, 2.25" solid bar, 3 speeds
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Draw Benches
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Brookes
MANUFACTURER:. BROOKES/FARMER NORTON, TONNAGE:. 25T (50,000 LB.), TYPE:. SINGLE CHAIN WITH INTEGRAL PUSH POINTER, NO. OF DIES. ONE, MAX. LENGTH OF DRAW. 11 METERS (36 FT), BED LENGTH:. 13 ...more
National Machinery Exchange has 2 more listings in Draw Benches.
Drill Heads, Quill and Way Type
2 Results
Aro 1/4" Air Drill With L Vents
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Drill Heads, Quill and Way Type
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Aro
ONE (1) VERTICAL DRILL ), )1/4" CAPACITY, ONE (1) HORIZONTAL DRILL), DRILL L-VENTS, MOUNTED ON TABLE, WEIGHT. 300 LBS., O.A.DIM. 23-1/2" X 54-1/2" X 59".
Two Heads Drill
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Drill Heads, Quill and Way Type
Seller: National Machinery Exchange
Location: Newark, NJ
Dust Collectors
1 Result
Trion #MAC-V, Dust Collector, 1 HP, 115 V., 2 amps
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Dust Collectors
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Trion
Model: MAC-V
Demag, sack side trimer
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Edge Trimmers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Demag
MANUFACTURER - SACK DEMAG, TYPE - INLINE PULL THRU TURRET SIDE TRIMMER, YEAR - 1986, SIDE TRIMMER COMPONENT LIST:, SIDE NOTCHER (ONE ON EITHER SIDE), HYDRAULICALLY ACTUATED, MAX CLEAR WIDTH ...more
Herlan, edge trimmer
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Edge Trimmers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herlan
CUSTOMER SHOULD VERIFY CURRENT MOTOR PRIOR, TO PURCHASE, CATALONG - ALL INFORMATION MUST BE CONFIRMED BY SELLER PRIOR TO, PURCHASE..
Herlan #BST/S, edge trimmer
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Edge Trimmers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herlan
Model: BST/S
CUSTOMER SHOULD VERIFY CURRENT MOTOR PRIOR, TO PURCHASE, CATALONG - ALL INFORMATION MUST BE CONFIRMED BY SELLER PRIOR TO, PURCHASE..
National Machinery Exchange has 3 more listings in Edge Trimmers.
28" x .1" Coilpro, Edging Line, 5000 lb., 250 FPM, 42" pass line, 2.5" roller diameter, new, 2012
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Edging Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Coilpro
Year: 2012
Manufacturer - CoilPro, Year - 2012, Material - Copper, Tensile Strength - 26-46 KPSI, Shear Strength - 20-56 KPSI, Gauge Range - 0.025"-0.125", Coil Weight - 5,000 Lbs, Entry Coil Width - ...more
Bradbury Puma Stucco design single stand embosser roll, 50" wide, 50 FPM, 40 HP, 2013
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Embossing Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bradbury
Year: 2013
50" WIDE BRADBURY-PUMA "STUCCO" DESIGN TWIN-STAND EMBOSSER ROLLS, YEAR NEW. 2013, NUMBER OF ROLL SETS. 2 (4 TOTAL), ROLL WIDTH. 53", WORKING WIDTH. 50", TOP & BOTTOM ROLL DIAMETER. 20" ...more
Corrugating/embossing cut to length line w/hole punching, 52", L-R
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Embossing Machines
Seller: National Machinery Exchange
Location: Newark, NJ
52" CORRUGATING/EMBOSSING CUT TO LENGTH LINE W/ HOLE PUNCHING, MACHINE :, PREVIOUS USE - SET-UP TO CORRUGATE POOL WALLS FOR ABOVE GROUND POOLS, LINE DIRECTION - LEFT TO RIGHT, INCLUDES: ...more
Metal embossing rolls, 24" width, 12" roll diameter, 2-1/2" adjustment, air clutch, 20 HP
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Embossing Machines
Seller: National Machinery Exchange
Location: Newark, NJ
WIDTH OF ROLLS. 24", DIAMETER OF ROLLS. 12", ADJUSTMENT. 2-1/2", AIR CLUTCH. YES, VARIABLE SPEED MOTOR. 20HP.
12" x 34" Southbend Lathe, 3-jaw 5" chuck, 65" bed length, quick change gearbox
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Southbend
65" total bed length, 34" Center to center, 5" 3 Jaw chuck, 12" swing over bed, quick change gearbox for feed changes, 208 Volt 3 phase 4.7 amp, O.A. DIM. - 66" X 24" X 54", WEIGHT - 830 ...more
15" x 32" Mannaioni #Man-Au-Cycle threading lathe, 3-jaw 8" chuck, tailstock, lead screw
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannaioni
Model: MAN-AU-CYCLE
15" X 32" MANNAIONI MAN-AU-CYCLE THREADING LATHE, Mannaioni 15" x 32" (est.) Man-Au-Cycle Threading Lathe, S/N: N/A, 4-1/2" (est.) Hole thru spindle, 8" 3-Jaw Chuck, Cross-Slide w/Tool ...more
20"/28" x 120" Nardini #SZ-20120T, gap bed engine lathe, 12" swing over cross slide, inch/metric, 3 & 4-jaw chuck, 1996
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nardini
Model: SZ-20120T
Year: 1996
, SWING OVER BED. 19-11/16", SWING IN REMOVEABLE GAP. 27-15/16", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 120", WIDTH OF BED. 13-38", SPINDLE NOSE. D1-8 CAMLOCK, SPINDLE BORE. ...more
National Machinery Exchange has 7 more listings in Engine Lathes.
Leinhard Single End Engraving Tooling Grinder
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Engraving Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Leinhard
Pyradia chamber furnace, 1200 Degrees , 2016
National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Environmental Chambers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: