Mullin Machinery
Farmingdale, NJ 07727-0921
Silver Level Dealer
Surplus Record Dealer Since 2017
Contact
About
Mullin Machinery's warehouse is 15,100 square feet of crane serviced and temperature controlled commercial space located in Howell, NJ 07731. We inventory all kinds of toolroom and fabricating machinery, almost anything for metal work along with some woodworking, plastic and misc shop items. Machinery often comes in a little faster than I can post to the website so call if you do not see what you need. I have more tooling and parts than I will ever have time to post but I will try to keep a good sampling online.Exporting machinery is no problem for us as we are about 3/4 hour outside of the Port of Elizabeth and have plenty of experience shipping to Dominican Republic, Equador, Chile, Peru, Honduras, Vietnam, and many other countries. Call or e-mail for rates.
Products & Services
- Brakes, Press
- Grinders
- Grinders, Cylindrical & Internal
- Grinders, Surface
- Ironworkers
- Lathes
- Rebuilding/Retrofitting
- Rolls
Associations & Affiliations
186 listings in 82 categories
4" x 4" x 5/8" Herkules #BO231-K, Angle Bending Roll
Category: Angle Bending Rolls
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Herkules
Model: BO231-K
Product, Herkules Angle Bending Roll, Model BO231-K, Capacity:, Angles Leg Out – 4″ x 4″ x 5/8″, Angles Leg In – 3 1/2″ x 3 1/2″ x 5/8″, Better Pictures Coming Soon with Video.
12" x 12" x 5" Ex-Cell-O #B-12, T-Slotted & Threaded Sine Plate
Category: Angle Plates
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Ex-Cell-O
Product Excello 12″ x 12″ T-Slotted & Threaded Sine Plate, Model B-12, Height Flat- 5″.
12" x 48" Challenge Angle Plates (2 available)
Category: Angle Plates
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Challenge Angle Plates, Height- 48″, Width- 12″, Base- 12″, Thickness- 1 5/8″, No holes. Plates stood in the corner of a machine shop for many years – unused..
24" x 24" x 12" Suburban Tool #TAP-122424, 24" Square T-Slotted Webbed Angle Plates
Category: Angle Plates
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Suburban Tool
Product Suburban Tool 24″ Square T-Slotted Webbed Angle Plates, Model TAP-122424, TAP-121818 Provides an accurate vertical base for mounting vises, sub-plates, parts or fixtures.Standard 5/8″ T-slots on 6″ centers.Made from class 35-40 cast iron.Extra heavy 2-1/2″ wall thickness provides ...more
48" Heavy Duty T-Slotted Cast Iron Angle Plates
Category: Angle Plates
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product.
Atco, Compound Angle sine plate, 6" x48"
Category: Angle Plates
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product ATCO 6″ X 48″ COMPOUND ANGLE SINE PLATEMANUAL SCREW ADJUSTMENT ON THE LONG SIDE, PERMANENT MAGNET, MADE IN USA, EXCELLENT CONDITION.
14 gauge x 8' Chicago Dreis & Krump #814, hand brake
Category: Apron and Hand Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Chicago
Model: 814
Product CHICAGO DREIS & KRUMP MODEL 814 HANDBRAKEModel 814, Capacity, Mild Steel 14 ga., Capacity, Stainless Steel 18 ga., Bending Length 96″, Overall Dimensions (L x W x H) 145″ x 56″ x 65″, Weight Approx. (Lbs.) 3,100.
Bed and Knee Milling Machines - Vertical
5 Results
Acer #3VS, variable speed Milling Machine, w/DRO, 9" x 42"
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Acer
Model: 3VS
Product Acer Model 3VS Milling Machine, Table Size- 9″ x 42″, Spindle- R8, Speeds- Infinitely Variable- Electronic Variable Speed, -Newall 2 Axis DRO, -Table Feed on X-Axis, -Power Drawbar, -R8 Collets, ***ALL ORIGINAL PAINT***, VIDEO COMING SOON.
Bridgeport #100-1527, vertical mill, 12" X, 5" Y, 16" Z, 9" x42" table, 4200 RPM, 1987
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Bridgeport
Model: 100-1527
Year: 1987
Product Bridgeport Series 1 Vertical Milling MachineSerial# BR-250101, New- 1987, TABLE SIZE ………………………… 9″ X 48″NUMBER OF T-SLOTS …………………. 3LONGITUDINAL TABLE TRAVEL …………… ...more
Bridgeport #Series-1, vertical mill, 2 HP, 9" x 42" table, AcuRite 2-Axis digital read out
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Bridgeport
Model: SERIES-1
Product, Bridgeport Series 1 Milling MachineTable- 9″ x 42″, -Acurite 2 Axis DRO, -Bridgeport Powerfeed, -Kurt Vise, -ColletS, -Rubber Way Covers, -LED Lights on both sides of spindle, ***ALL ORIGINAL PAINT. WAYS AND TABLE ARE VERY NICE***.
Clausing Kondia #FV-300, vertical miller, 11" x58" tbl., 4 HP, 34" X, 15" Y, 23" Z, Heidenhain 2-Axis digital read out, Kurt power draw bar
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Clausing
Model: FV-300
Product CLAUSING-KONDIA VERTICAL MILLING MACHINEMODEL: FV-300, S/N: AA-924:TABLE SIZE ………………………. 11″ X 58″NUMBER OF T-SLOTS ………………… 3LONGITUDINAL TABLE TRAVEL …………. 34″SADDLE TRAVEL ...more
Deckel #FP3L, universal milling machine, 20-1/2" x39-1/8" table, tilting table, #40 taper
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Deckel
Model: FP3L
Product, Deckel FP3L Universal Milling Machine Universal Tilting Table, T-Slott Area- F-B 20 1/2″, L-R 39 1/8″, Spindles- 40 Taper, Both the vertical and horizontal spindles have quills., Currently wired 230v 3ph, -Misc Collets, -1 Horizontal Milling Arbor, -1 alignment bar, -Misc Deckel & NMTB 40 ...more
2 x 132 Bader Space Saver #1004a, Square Wheel Belt Grinder
Category: Belt Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Bader
Model: 1004A
Product Bader Space Saver Model 1004a, the Square Wheel Head, Uses 2″ x 132″ Belts, Wired 230/460 3ph.
2" Dynabrade #64902, variable speed versatility grinder, 50/60 Hz, 22" H x 33" L, 2000-8000 SFPM
Category: Belt Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Dynabrade
Model: 64902
Product Dynabrade 64902 Variable Speed Versatility GrinderProduct Brand:DynabradeAbrasive Belt Size:1/4 -2 inFrequency:50/60 HzHeight:22 inLength:33 inMax SFPM:2000-8000Phase:3Sound Level:82 dB(A)Voltage:240 V (AC)Horsepower:3 hp.
3" Ryman Engineering #712-LA, Lathe Mount Belt Sander, 7.5 hp 230/460 3ph
Category: Belt Sanders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 712-LA
Product Ryman Engineering Lathe Mount Belt Grinder, Model 712-LA, Motor- 7.5 hp 230/460 3ph, Uses a 3″ wide belt, Weight 340 lbs.
6" x 60" Kalamazoo, Belt Sander, dust collector
Category: Belt Sanders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Kalamazoo
Product KALAMAZOO INDUSTRIAL BELT SANDERMODEL- S660MV, WIRED- 3HP 230/460 3PH CURRENTLY 460V, BELT SIZE- 6″ X 60″, BUILT IN DUST COLLECTOR.
6" x 48" Engelberg #506, Wet/Dry Belt Sander, 5 HP, 230/460 V.
Category: Belt Sanders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 506
Product Engelberg Wet/Dry Belt SanderBelt Size- 6″ x 48″, Wired 5hp 230/460 3ph, Weight- 550 lbs.
1-1/2" Landis #12C, bolt & rod threader, Serial # 12CP1B-05
Category: Bolt Threaders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Landis
Model: 12C
Product Landis Model 12c Bolt & Rod Threader, Serial # 12CP1B-05, Lanco 1 1/2″ Die Head 12R4992, Hardened Ways are in very good shape., Wired 230/460 3ph.
1-1/2" Landis, rod & bolt threader, w/ LanCo 12R die head, gears, updated electrics
Category: Bolt Threaders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Landis
Product, LANDIS 1 1/2″ BOLT & ROD THREADING MACHINESERIAL# 1 1/2 L926, CAPACITY- 1 1/2″, -LANCO 12r DIE HEAD, -GEARS- 36-45-(2) 72-84-108-196, -GEARS FOR BACK OF SPINDLE- 36-48, -(3) SETS OF CHASER HOLDERS COVERING 1/4″ – 1 1/2″, MACHINE HAS NEWER ELECTRIC INCLUDING MOTOR, FUSIBLE ...more
Wohlhaupter, Narex, & More Large Boring & Facing Heads
Category: Boring Heads
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wohlhaupter
Product Wohlhaupter, Narex, & More Large Boring Heads, (1) Narex VHU 3 1/8 80 Boring & Facing Head 50 Taper ——-$2595, (2) Wohlhaupter UPA5-40 Boring & Facing Head Set NMTB40 Shank ——$2295, (3) Wohlhaupter UPS3- R8 Shank- Like New $1000, (4) Wohlhaupter UPS4 – 40 Taper Set- ...more
Ingersoll, LOT of 4 Boring Mill / Bridge Mill Jaws, 10-5/8" x 13" base, 14-5/8" H, AS IS
Category: Boring Jaws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product (4) Ingersoll Boring Mill / Bridge Mill Jaws, Base is 10 5/8″ x 13″, Height from bottom to top of jaws- 14 5/8″, Some toolmarks but still good usable jaws..
Boring Mills, Horizontal, Table Type
1 Result
3" Pama #AL-75, Horizontal boring mill, 15-1200 RPM, 35" x39" table, Acurite digital read out, inch/metric thread
Category: Boring Mills, Horizontal, Table Type
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Pama
Model: AL-75
Product, PAMA AL-75 HORIZONTAL BORING MILL SPINDLE DIAMETER- 3″, MILLING SPINDLE DIAMETER- 5.062″, SPINDLE TAPER- MT#5, SPINDLE TRAVEL- 24″, SPINDLE VERTICAL TRAVEL- 35″, MAXIMUM DISTANCE FROM SPINDLE TO END SUPPORT- 78″, SPEEDS (24) 15-1200 RPM, TABLE- 35″ X 39″, TRAVERSE ...more
C Frame Hydraulic Press Machines (Gap Frame)
2 Results
5 Ton, Industrial Air & Hydraulics, C-Frame Hydraulic Press, 11-1/4" gap, 5-3/4" throat, 2-3/4" stroke, 230/460 V., 3ph
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product, Industrial Air & Hydraulics 5 Ton C-Frame Hydraulic PressTons- 5, Center of Ram to Back of Press Frame- 11 1/4″, Center of Ram to Outer Frame- 5 3/4″, Stroke- 2 3/4″, Weight- 800 lbs, Wired- 230/460 3ph.
30 Ton, Tox Pressotechnik #PG-30, C-Frame Press, 5.9" stroke, 90 psi, 2007
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Tox Pressotechnik
Model: PG-30
Year: 2007
Product, TOX PRESSOTECHNIK MODEL PG-30 C-FRAME PRESSSERIAL# 309886, NEW 1/07, TONS- 30, MAX AIR PRESSURE- 90 PSI, MAX STROKE- 5.9″, HEIGHT- 114″, WEIGHT- 4000 LBS.
Carbide, Friction and Cold Saws
1 Result
14" Scotchman, High Speed Cold Saw
Category: Carbide, Friction and Cold Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Scotchman
Product, Scotchman 14″ High Speed Cold Saw, Model# 350NF/PK/PD, Blade- 14″, Power Vise, Power Downfeed, Wired- 440v 3ph.
Chain Hoists, Monorail and Trolley Cranes
1 Result
2 Ton, Spanco, Aluminum A-Frame Crane, w/ Coffing 2 Ton Electric Hoist, 105" between uprights, 230/460 V.
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Spanco
Product Spanco 2 Ton Aluminum A-Frame Hoist w/ Coffing 2 Ton Electric HoistCoffing 2 ton Hoist is 230/460v 3ph, The A-Frame has 105″ between uprights., Unit is in super condition..
CNC Machine Controls
1 Result
Haas, CNC control simulator, 22 hours, 2018
Category: CNC Machine Controls
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Haas
Year: 2018
Product 2018 HAAS CNC CONTROL SIMULATORDATED 3/2018, CAME FROM A SCHOOL WITH A 2018 HAAS MINIMILL WITH ONLY 22 HOURS ON THE MILL., UNIT WORKS FINE- WOULD BE A GOOD SOURCE OF BASICALLY NEW PARTS IF YOU NEED A SCREEN, KEYPAD, HAND DIAL, ETC, WEIGHT- 45 LBS.
45 Ton, Atlantic #HDE-45-6-5, 6' overall, 63" between housing, 3.9" stroke, 7.6" throat, AutoBend 7 2-Axis CNC Back Gauge
Category: CNC Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Atlantic
Model: HDE-45-6-5
Product Hurco 6′ of 45 Ton Hydraulic Press Brake, Model HDE 45-6-5, Tonnage……………. 45 Ton, Bending Length………. 83”, Dist Between Housings… 63”, Throat Depth………… 7.6”, Stroke Length………. ...more
140 Ton, Wysong #THS140-144, CNC hydraulic press brake, 12' overall, Automec CNC99 Control, 1999
Category: CNC Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wysong
Model: THS140-144
Year: 1999
Product Wysong Hydraulic Press Brake, Model THS140-144, Serial# TH9-103, New 7/1999, Bed Length- 144″, Tons- 140, Stroke- 8″, Bending Speed- 20 IPM, Return Speed- 200 IPM, a Automec CNC99 Control-2Axis- Backgauge and Ram, A die rail is not in the pictures but I have a new one on order., ***ALL ORIGINAL ...more
175 Ton, Clearing Niagara #HBM-175-10-12, CNC Hydraulic Press Brake, 12' overall, 1272" between housing, 1995
Category: CNC Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: HBM-175-10-12
Year: 1995
Product, Clearing Niagara Model HBM-175-10-12 Hydraulic Press Brake, Serial# P54335, New- 1995, Capacity: 175 Ton, Overall Length: 12′, Distance Between Housings: 10′ 6″, Stroke: 10″, 30 hp, Automec CNC99 Back Gauge- 2- Axis- Backgauge & Ram, ***ALL ORIGINAL PAINT- Machine is in Excellent ...more
CNC Rotary Tables and Indexers
2 Results
15-3/4" Calmotion, CNC Indexers/4th Axis
Category: CNC Rotary Tables and Indexers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Calmotion
Product Calmotion 15 3/4″ CNC 4th Axis, 10″ Center Height, Weight- 640 lbs, The motor is a GlenTek Brushless Servo Model GMBM1301700-54-0002151-197A, See pics for motor tag and plug connections..
SMW #ACCU-ROCK-RT175VN, CNC 4th Axis, A-6 spindle taper, 1.26" through hole
Category: CNC Rotary Tables and Indexers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Smw
Model: ACCU-ROCK-RT175VN
Product SMW ACCU-ROCK RT175VN CNC 4th Axis, FANUC MOTOR THAT HAS A ALPHA ENCODER- WILL NOT WORK WITH FANUC BETA SYATEMS, Spindle Taper- A-6, Through Hole- 1.26″, Accuracy- +/- 10 Sec, Repeatability- 2 Sec, Spindle Run-Out-.0004, Work Capacity- Vertical- 120 lbs, Horizontal- 245 lbs, Weight- 140 lbs, a Bison 5c ...more
CNC Vertical Bed Mills
1 Result
Vectrax, 3-Axis CNC Milling Machine, 10" x54" table, 5 HP, Fagor Control
Category: CNC Vertical Bed Mills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Vectrax
Product Vectrax 10″ x 54″ 3 Axis CNC Milling Machine Fagor Control, Spindle Speed Control Variable Speed Pulley Longitudinal Travel (Inch) 32 Cross Travel 16 1/2″ Knee Travel 17-1/2″ Minimum Spindle Speed 70 rpm Maximum Spindle Speed 3600 rpm Spindle Travel 5″ Spindle Taper Size R8 Quill ...more
Harper #E-200, 2" turning vane maker, double uncoiler
Category: Cut-off Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: E-200
Product, HARPER METAL PRODUCTS MODEL E-200 VANE MAKERSERIAL# E7492, WIRED- 230V 3PH 30AMPS, PRODUCES A 2″ TURNING VANE, COMES WITH DOUBLE UNCOILER, ***BECAUSE IT WAS PRODUCING ALUMINUM VANES, IT HAS A COLDSAW BLADE FOR CUT-OFF. IT MAY NEED TO BE SWITCHED TO ABRASIVE FOR STEEL***.
Tulca #PT-500, Edge Grinder / Finisher / Deburr, 2 grinding wheels
Category: Deburring Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Tulca
Model: PT-500
Product Tulca (Italy) Model PT-500 Edge Grinder / Finisher / Deburr, Machine uses 2 grinding wheels to deburr or remove the sharp edge on ferrous metals., This is a heavy built machine not like the little bench top units..
Die Cutting Press Machines
1 Result
Steel Rule Die Bender & Cutter Set- Made in Italy
Category: Die Cutting Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Steel Rule Die Bender & Cutter Set- Made in Italy, I am not sure of the brand as it is not marked other than Made in Italy..
Die Tryout and Spotting Presses
1 Result
50 Ton, Herman Schwabe #DG-HD, Up-Acting Die Press, 38" x 38" bed, 6" stroke, 10 HP
Category: Die Tryout and Spotting Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Herman Schwabe
Model: DG-HD
Product Herman Schwabe 50 Ton Model DG-HD Up-Acting Die PressBed Area- 38″ x 38″, Maximum Stroke- 6″, Electric- 10 hp 230/460 3ph.
Dies For Press Brakes
3 Results
45" L, Wilson Tool 724564-0010, Press Brake Die Set for Lighting Reflector, 1/2 tang
Category: Dies For Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Wilson Tool Die Set Model 724564-0010, Dies are made to form the reflector that goes above long tubular light bulbs- originally for fluorescent lights but I imagine that would be the same for LED lights., 45″ OAL, Standard 1/2″ tang.
144" L, Press Brake Punch Die, 4" 85 Degree Die with 2-3/8" Punch
Category: Dies For Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product 145″ OAL Press Brake Punch Die, 4″ 85 degree V in the lower, 2 3/8″ thick upper punch.
Press Brake Dies
Category: Dies For Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product USED BRAKE DIES(1) 72 1/2″ OF 2 1/4″ OFFDET DIES- UPPER & LOWER- $1250, (2) 4″ FEMALE V-DIES (2) 72″ SECTIONS 5 1/4″ WIDE, 5 3/4″ HIGH -HAS TANG SLOT BUT NO KEY- $2500.
Dust Collectors
1 Result
Torit #DF01-01, Dust Collector, 115 V.
Category: Dust Collectors
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Torit
Model: DF01-01
Product TORIT DF01-01 DUST COLLECTORWired 115v 1phase, Very good condition..
15" x 40" Sheldon #R-15, lathe, 2-1/4" bore, 1250 RPM, AcuRite digital read out, tailstock, Buck Adjust-Tru chuck,
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Sheldon
Model: R-15
Product, Sheldon Model R-15 Lathe, Swing Over Ways- 15″, Distance Between Centers- 40″, Spindle Hole- 2 5/16″”, Spindle- D1-6 Camlock, Tailstock Taper- MT#4, Speeds- To 1250 rpm, -Acu-Rite Digital Readout, -Aloris Toolpost & Holders, -Live Center, -Tailstock Chuck, -Taper Attachment, -Buck ...more
15" x 50" Clausing Colchester lathe, taper, in/mm threading
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Clausing
19" x 78" LeBlond Makino #Regal, engine lathe, 12-1/4" swing over cross slide, 3-1/16" bore, 25-1000 RPM, 10 HP, taper attachment, digital read out, 1995
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond Makino
Model: REGAL
Year: 1995
Product LEBLOND MAKINO 19″X78″ LATHEMODEL: 19″ REGAL, S/N: 15E, NEW: 1995, SWING OVER BED ………………. 19-1/4″, SWING OVER CROSS SLIDE ………… 12-1/4″, DISTANCE BETWEEN CENTERS ………. 78″, WIDTH OF BED ...more
20" x 156" Leblond, Engine Lathe with Taper attachment, 1-3/4" spindle hole, Steel Steady Rest
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond
Product Leblond 16 Heavy Duty Lathe 20″ x 156″, Actual Swing 20 1/2″, Distance Between Centers 156″, Spindle Hole 1 3/4″, Taper Attachment, Steel Steady Rest with Roller Jaws, Toolpost & Holders, There is no compound on the carriage- the toolpost mounts directly to the cross-slide..
25" x 78" LeBlond Makino #Regal, engine lathe, 17-1/4" swing over cross slide, 3-1/16" bore, 40-1600 RPM, 10 HP, taper attachment, Steady Rest
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond Makino
Model: REGAL
Product LEBLOND-MAKINO ENGINE LATHE 25″ x 78″ MODEL: REGAL, S/N: 14E, NEW:, SWING OVER BED ………………. 25-1/4″, SWING OVER CROSS SLIDE ………… 17-1/4″, DISTANCE BETWEEN CENTERS ………. 78″, SPINDLE NOSE ...more
25" x 120" Ikegai, Lathe w/Taper, 3 and 4 jaw chucks, tailstock chuck, live center, steady rests
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Ikegai 25×120″ lathe with taper attachment, 3 and 4 jaw chucks, tailstock chuck and live center and steady rests..
26" x 120" Standard Modern #26/120, Lathe, 18" swing over cross slide, 3" hole, 17-1000 RPM, Steady Rest
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Modern
Model: 26/120
Product STANDARD MODERN MODEL 26/120 LATHESWING OVER WAYS- 26″, SWING OVER CROSS-SLIDE- 18″, SPINDLE TAPER- D1-8, SPINDLE HOLE- 3.06″, DISTANCE BETWEEN CENTERS- 120″, TAILSTOCK TAPER- MT#5, THREADING- INCH & METRIC, SPINDLE SPEEDS- (18) – 17-1000 RPM, -3 & 4 JAW CHUCKS ...more
48" x 108" Monarch Heavy Duty Dyna-Shift, Newall 2-Axis Digital Readout
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Monarch
Product, MONARCH HEAVY DUTY DYNA-SHIFT LATHE 48″ X 108″, Serial # 42218 Model: Series 90, Catalogue Size 2502, New 1957, Swing Over Bed Ways: 48″, Swing Over Cross Slide: 36″, Spindle Hole Size: 4-1/16″, Spindle Type: D1-11, Spindle Taper: 7 MT, (36) Spindle Speeds: 6 to 750 RPM, (48) ...more
Model 92GW Edward Segal, grommet machine, 1/2 HP, electric foot switch actuation
Category: Eyeletters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Edward Segal
Model: 92GW
Product, Edward Segal Model 92GW Grommet MachineGrommet & Washer Feed: Automatic from, rotating brush hoppers, • Motor: ½ HP, 115 VAC, 60 HZ, Single Phase, • Flywheel Speed: 140 rpm, • Throat depth: 2-1/2””, • Compressed Air: Filtered 50-60 PSI, 0.2cfm, • Overall ...more
Finishing Machines
1 Result
PEM Bevel Mill Edge Finisher, Wired- 110/220v 1ph Currently 110v
Category: Finishing Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Pem
Product, PEM Bevel Mill Edge Finisher, Wired- 110/220v 1ph Currently 110v, Uses Square Positive Carbide Inserts, Weight- 132 lbs.
Flange and Web Punch Machines
1 Result
50 Ton, Whitney, portabe hydraulic punch, 4-=1/8" throat, 10 HP
Category: Flange and Web Punch Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Whitney
Product, ESTERLINE WHITNEY MODEL 75001 HYDRAULIC PUNCHCAPACITY- 50 TONS, THROAT DEPT- 4 1/8″, WIRED- 10hp 208-230/460 3PH, ALL ORIGINAL PAINT. UNIT IS IN VERY GOOD CONDITION AND ON A WELL MADE ROLLING STEEL TABLE, COMES WITH A SELECTION OF PUNCHES AND DIES, WEIGHT 1030 LBS.
Lockformer, Button Punch Snap Lock Flanger, 20-28 gauge, 7-1/16" flange
Category: Flangers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lockformer
Product Lockformer Button Punch Snap Lock FlangerCapacity- 20-28ga Mild Steel, Flange Height- 71/6″, Wired- 115v 1ph, Weight- 250 lbs.
16 gauge x 52" Pexto #152-K, foot shear
Category: Foot Shears
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Pexto
Product Pexto Model 152-K Foot Shear :, Max. Shearing Capacity:, Mild Steel: 16 Gauge, Stainless Steel: 20 Gauge, Max. Cutting Length: 52″, Back Gauge Range: 30″, Blades are sharp. Saw little use in a community college..
Clausing Ibarmia #B-45, Geared Head Drill Press, 3 HP, 73-1415 RPM, 230/460 V., 7.87" stroke, (2 available)
Category: Gear Head Drills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Ibarmia
Model: B-45
Product, Clausing Ibarmia B-45 Geared Head Drill PressCapacities Maximum drilling capacity in steel 1.77″ (45mm) Maximum drilling capacity in cast iron 2.17″ (55mm) Maximum tapping capacity in steel 1.3″ (33mm) Maximum tapping capacity in cast iron 1.57″ (40mm) Spindle taper 4MT Quill diameter ...more
Solberga #SE1735, Geared Head Drill Press, 230 V., 3ph
Category: Gear Head Drills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Solberga
Model: SE1735
Product Solberga SE1735 Geared Head Drill PressSpindle Taper- MT#3, Speeds- (8) 60-120-160-320-260-520-715-1430, Wired- 230v 3ph.
Wilton Strands #24714, Geared head drill, 90-3610 RPM, 460 V., 3ph, MT#3 spindle, w/ Jacobs Super chuck
Category: Gear Head Drills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wilton
Model: 24714
Product WILTON STRANDS GEARED HEAD DRILLType 24714, Serial# 91067, Voltage- 460v 3ph, Speeds- 90-190-320-530-640-1060-1790-3610, Spindle- MT#3, a Jacobs 18n Ball Bearing Super Chuck 3/4″ Capacity, Runs Excellent, ***ALL ORIGINAL PAINT***.
Arboga Wilton #A2608, geared head drill press, 105-2900 RPM
Category: Gear Head Drills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wilton
Model: A2608
Product WILTON ARBOGA GEARED HEAD DRILL PRESSMODEL- A2608, SPINDLE- MT#3, SPINDLE SPEEDS (8 ): 105 – 210 – 350 – 445 – 700 – 890 – 1450 – 2900 rpm, WIRED- 120V 1PH.
H Frame Hydraulic Press Machines
2 Results
150 Ton, Enerpac, H-Frame hydraulic shop press, electric, 13" stroke, 48.5" daylight, 10000 psi, 48" bed width
Category: H Frame Hydraulic Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000 Capacity –150 Tons Maximum Vertical Daylight –48.5″ Maximum Bed Width –48″ Power Source Type-Electric Cylinder Model Number-RR20013 Cylinder Type-Double-Acting, Hydraulic Return Cylinder ...more
150 Ton, Enerpac, H-Frame Hydraulic Shop Press, 13" stroke, 48.5" daylight, 48" bed width, 10,000 psi
Category: H Frame Hydraulic Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000Capacity –150 TonsMaximum Vertical Daylight –48.5″Maximum Bed Width –48″Power Source Type-Electric 208-230/460 3phCylinder Model Number-RR20013Cylinder Type-Double-Acting, Hydraulic ReturnCylinder ...more
Diacro #4, Hand Shear, 24" x 16 gauge, w/ Back Gauge
Category: Hand Shears
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Diacro
Model: 4
Product Diacro No. 4 Hand ShearCapacity- 24″ of 16ga Mild Steel, Complete with micrometer back gauge, Blades are sharp, All original paint.
Hardware Inserting Presses
2 Results
6 Ton, Haeger #HP6-B, Hydraulic Insertion Press, 18" throat, 8.5" stroke
Category: Hardware Inserting Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Haeger
Model: HP6-B
Product, HAEGER HP6-B 6 TON HYDRAULIC INSERTION PRESSModel # HP6-B, Serial # 794, Maximum force- 12,000 Lbs. (54 KN.), Electrical requirements-230/460v 3ph Amperes- 5.2, Stroke length- 0 to 8-1/2″, Throat depth- 18”.
7.5 Ton, Auto-Sert #AS-7.5, hydraulic hardware insertion press, 20" throat, 6" stroke,vibratory bowl feed system
Category: Hardware Inserting Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Auto-Sert
Model: AS-7.5
Product, Better pics and video coming soon..
Horizontal Band Saws
3 Results
12" x 10" Behringer #HBP-263N, 2 Post horizontal bandsaw, 11' x 1-1/4" blade
Category: Horizontal Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Behringer
Model: HBP-263N
Product BEHRINGER HBP-263N 2 POST HORIZONTAL BANDSAWCAPACITY- 11.8″ X 10.2″, BLADE- 11′ X 1 1/4″, WIRED- 480V 3PH, ***ALL ORIGINAL PAINT***, VIDEO COMING SOON.
26" x 42" Hyd-Mech H-26/42, 2-post horizontal band saw, 29" rounds
Category: Horizontal Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hyd-Mech
Model: H-26/42
26" x 42" Hyd-Mech #H-26/42, 2 post horizontal bandsaw, 2-5/8" x 33' blade, 75-300 SFM, semi-auto PLC Control
Category: Horizontal Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hyd-Mech
Model: H-26/42
Product Hyd-Mech H-26/42 Horizontal Saw Serial# DS1198004 Technical Capacity Rectangular (h x w) Round Square 90° 26” x 42” 29” 26” Blade Size 2 5/8” x 33’ Hydraulic Tank Capacity 9.5 Gallons Blade Drive 20 HP Coolant Tank Capacity 50 Gallons Machine Voltage 480 v 3ph Machine ...more
Sunnen #MBB-1660, honing machine, misc mandrels & stones, S/N 87125
Category: Horizontal Hones
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Sunnen
Model: MBB-1660
Product Sunnen Honing Machine, Model MBB-1660, Serial# 87125, Comes with misc mandrels and stones. The ones in the video went out with another machine but we have others laying around the shop., ALL ORIGINAL PAINT..
Sunnen #MBB-1660K, Honing Machine, 0.5 HP, 2500 RPM, 16" L, 6.5" capacity
Category: Horizontal Hones
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Sunnen
Model: MBB-1660K
Product, Sunnen Honing Machine Model MBB-1660KCapacity.06″-6.5″ Length Range Up to 16″ Machine Motor 1/2 H.P. Machine, Electric 115V, 1 Phase Spindle Speeds (12) 200-2,500 RPM’s Machine Weight 630 Lbs. Comes with several plastic totes of mandrels- all small bore..
33 Ton, Guilfil #PE15-30, Hydraulic Press Brake, 5' overall, 3.937" stroke, S/N 014315
Category: Hydraulic Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Guilfil
Model: PE15-30
Product Guilfil Model PE 15-30 Hydraulic Press Brake, Serial # 014315, Tons- 33, Length- 60″, Stroke- 3.937″, Weight- 4300 lbs, One owner machine, ***ALL ORIGINAL PAINT***, Uses European Dies (Amada Type) – Assorted Misc Dies included as Well as a Short Length of American Die Adapter,..
140 Ton, Wysong #THS140-144, hydraulic press brake, 12' overall, 8" stroke, 17" die opening, 9" adj.
Category: Hydraulic Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wysong
Model: THS140-144
Product Wysong Hydrauic Press Brake, Model THS140-144, Serial # TH9-101, 140 Ton, 144″ Bed, 8″ Stroke, 9″ of Adjustment, 17″ die opening, Wired 575v but comes with a 480v transformer, I have a die rail not in the pictures., There is a foot pedal- it is behind the machine in the pictures., There ...more
140 Ton, Wysong, hydraulic press brake, 10' overall, 102" between housing, 8" stroke, Autobend Back Gauge
Category: Hydraulic Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wysong
Product, WYSONG 140 TON x 10′ HYDRAULIC PRESS BRAKESERIAL# MT11-113, BED LENGTH- 120″, DISTANCE BETWEEN HOUSINGS-102″, TONS- 140, STROKE- 8″, WEIGHT- 18,500 LBS, A HURCO AUTOBEND 7 3 AXIS CNC BACK GAUGE- 2 AXIS ON THE BACK GAUGE AND DIGITAL ON THE RAM.
6 Ton, hydraulic press, 1-1/2" stroke, 23-5/8" x 14-1/8" bed plate, 115 V.,
Category: Hydraulic Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product 6 Ton Hydraulic Forming / Assembly / Punching Press 115v 1ph, I cannot find a brand name on it- these kind are usually custom built for specific industries with custom die sets from forming, bending, punching, or assembly work. Definitely not a Asian import. All hydraulic components are high quality brand ...more
50 Ton, Enerpac #IPE5010, hydraulic press, 28-1/2" between housing, 13" stroke, 120 V.
Category: Hydraulic Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Model: IPE5010
Product, ENERPAC 50 TON ELECTRIC HYDRAULIC PRESSMODEL IPE5010, TONS- 50, STROKE- 13″, DISTANCE BETWEEN UPRIGHTS- 28 1/2″, GAP BETEEN BED- 8 1/2″, PUMP- Z-CLASS E4, WIRED- 120V 1 PHASE.
Initial and Double Pinch Plate Bending Rolls
2 Results
1.5' x 22 gauge Niagara #2-18, Power Bending Roll, 2" diameter rolls
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: 2-18
Product Niagara Model 2-18 Power Bending RollRoll Diameter- 2″, Roll Length- 19″, Wired- 120v 1 phase, Capacity- 22 ga.
4' x 10 gauge San Angelo Foundry, plate roll, 5" diameter roll, manual drop end, 230/460 V.
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product SAN ANGELO FOUNDRY & MACHINE PLATE ROLLCAPACITY- 48″ OF 10GA, ROLL DIAMETER- 5″, MANUAL DROP END, MADE IN TEXAS, WIRED 230/460 3PH.
2" x 2" x 1/4" Lehmann #PRESSHEAR-10, Mechanical Ironworker, 18 tons, 7/8" round, 2" stroke, 6-1/2" Shut Height, 115 V., 1ph, square tube shear installed
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lehmann
Model: PRESSHEAR-10
Product Lehmann PRESSHEAR #10 Serial# 103374, Shearing Capability-2x2x1/4 Angle3/4 Round3/4 Square1/4×4 Flat2×1/2×1/8 ChannelCap RailPunch Capacity – 18 TonsPunch 7/8 Round hole thru 1/4″ mild steelStroke 2″Shut Height 6-1/2Wired 115v 1phase, the square tube shear in place of the ...more
2" x 2" x 1/4" Roper Whitney Pexto #455, Combination Angle Iron Shear, Notcher, Bender
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Pexto
Model: 455
Product Roper Whitney Pexto No. 455 Combination Angle Iron Shear, Notcher, BenderShear Capacity- 2″ x 2″ x 1/4″, Weight- 200 lbs, Blades are in good shape. Overall a good working unit..
3" x 3" x 5/16" Geka #MICROCROP, Hydraulic Ironworker, 36 Ton, 220 V., 1ph
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Geka
Model: MICROCROP
Product, GEKA MICROCROP 36 TON HYDRAULIC IRONWORKERSerial# 3506, Capacity:, Angles- 3″ x 3″ x 5/16″, Flats- 8″ x 1/2″, 14″ x 1/4″, Punching- 1 1/16″ thru 3/8″, Comes with the following punches: 5/16″, 3/8″, 1/2″ & 9/16″, Wired- 220v 1 ...more
4" x 4" x 3/8" Peddinghaus #PEDDIWORKER-880, hydraulic ironworker, 88 Ton, 230 V., 3ph
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Peddinghaus
Model: PEDDIWORKER-880
Product, PEDDINGHAUS 88 TON HYDRAULIC IRONWORKERMODEL- PEDDIWORKER 880, TONS- 88, CAPACITY:, -ANGLES- 4″X4″X 3/8″, -ROUND BAR- 1 1/4?, -SQUARE BAR- 1 3/16″, -COPING- 2″ X 3/8″, -FLATS- 14″ OF 5/8″, WIRED 230V 3PH, A GOOD SELECTION OF PUNCHES, ***ALL ORIGINAL PAINT***.
6" x 6" x 1/2" Hill-Acme #6A, Hydraulic Ironworker, 105 Ton Punching
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hill-Acme
Model: 6A
Product Hill Acme #6A Metalworker, Serial#996A-156-01, 105 Ton Punching—60,000 Tensile Material, Max. Dia. Thru Thickness— 1 5/6″ Thru1″ Tk., Punch Throat Dept- 25″, Shearing, -Flats— 1/2″ x 21″, 3/4″ x 10 1/2″, -Rounds— 2 1/4″, -Squares— ...more
6" x 6" x 1/2" Peddinghaus #210/20, mechanical ironworker, 10"- 20 lb. C-channel, 9" 20 lb. I-Beam
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Peddinghaus
Model: 210/20
Product Peddinghaus 210/20 Mechanical Ironworker, Capacity:, Angles – 6″ x 1/2″, T- 6″ x 1/2, Squares- solid – 2″, Round – solid – 2 3/16″, C-Channel 10″ – 20 lb, I-Beam 9″ 20 lb, Coper 5/8″, Wired 460v 3 ph, Comes with Channel & I-Beam ...more
6" x 6" x 1/2" Peddinghaus #Peddimax-110/140, Hydraulic Ironworker, 110 Ton punch, 20" throat, 22 SPM, 2" stroke
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Peddinghaus
Model: PEDDIMAX-110/140
Product, Peddinghaus Peddimax 110/140 Hydraulic IronworkerPunch Tonnage: 110 Ton, Punch Stroke: 3/8″ – 2″, Punch Capacity: 1.25″ x 1″, Punch Throat Depth: 20″, Punch Strokes Per Minute: 22, Shear Tonnage: 140 Ton, Flat Bar Shear Capacity: 20″ x 5/8″; 16″ x ...more
Buffalo, Hydraulic Ironworker, 230/460 3ph, 1999
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Buffalo
Year: 1999
Product, Buffalo Hydraulic Ironworker, MODEL OH, SERIAL# 79y3885, CAPACITY IN 65,000 PSI TENSILE STRENGTH STEEL:, PUNCHING- 1 1/16 thru 1/2″, 13/16 thru 5/8″, ANGLES- 3 x 3 x 3/8″, ROUNDS- 1 3/8″, SHEAR- 1/4 x 7″. 3/8 x 6″, 1/2 x 4″, COPER- 2″ x 2 1/4″ thru ...more
1-1/4" x 9" Morrison #K, keyseater, 34 SPM, Bijur 1-shot lube
Category: Keyseaters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Morrison
Model: K
Product MORRISON MODEL K 1 1/4 KEYSEATER:CUTS KEYWAYS ………………. 1/16″ TO 1-1/4″ WIDEMAXIMUM LENGTH OF CUT ………. 9″LENGTH OF STROKE: …………… 3″, 4-1/2″, 6″, 7-1/2″, 9″STROKES PER MINUTE ...more
1-1/4" Morrison #K, Keyseater, 9" stroke, 27" x 24" table, 2 HP, 230/460 V., 3ph
Category: Keyseaters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Morrison
Model: K
Product Morrison Model K 1 1/4″ Keyseater, Serial #, KEYWAY CAPACITY …………. 1/16” TO 1 ¼”STROKE …………………. Adjustable to 9”TABLE …………………. 27” X ...more
1/16"- 1-1/2" Davis #5, keyseater broach machine, 18-3/4" throat, 30-1/4" x 31" table, 4-1/2" stroke, 48 SPM, w/ parts, AS IS
Category: Keyseaters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Davis
Model: 5
Product 1 1/2″ Davis No. 5 Keyseater: CUTS KEYWAYS IN STEEL ……………. 1/16″ TO 1-1/2″, WIDE THROAT DEPTH, FACE OF CUTTER TO ARM POST ……………. 18-3/4″, MAX WORK HEIGHT, STANDARD …………. 12″, TABLE SIZE ...more
24" Amestra, 4 Jaw Lathe Chuck, Plain Back Hollow Chuck, 3 7/8 thick, 3 3/8 hole, 4 11/16 Center to Center
Category: Lathe Chucks
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Amestra (Germany) 23 5/8″ Lathe Chuck 4 jaw Independent, 3 7/8″ thick, Hollow back, 3 3/8″ hole, 4 11/16″ Center to Center on the bolt holes across the center, Back recess is 6 1/4″ x 1 1/16″ deep.
Mechanical Punch Presses
9 Results
3 Ton, Kenco #3K-7-100, Punch press, w/ Palm buttons, 1" stroke, 300 SPM
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 3K-7-100
Product, KENCO PUNCH PRESSMODEL- 3K-7-100, SERIAL# 86-3960, TONS- 3, STROKE- 1″, SPM- 300, WIRED- 115/230V 1PH.
3 Ton, Perkins #S6K, Mechanical Clutch Punch Press, 1" stroke, 5-1/2" Shut Height, 1" adj., 6" x 12" bed
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: S6K
Product PERKINS 3 TON MECHANICAL CLUTCH PUNCH PRESSMODEL- S6K, SERIAL# 27700, TONS- 3, STROKE- 1″, SHUT HEIGHT- 5 1/2″, ADJUSTMENT- 1″, SHANK- 1″, BED AREA 6″ X 12″, WIRED 115V 1PH.
3 Ton, Perkins Junior, Punch Press, w/ Ettco Terminal Die, 1-1/8" stroke, 4" Shut Height, 5-1/2" x 9" bedd
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product, Perkins Junior Punch PressTons- 3, Stroke- 1 1/8″, Shut Height- 4″, Bed Size- 5 1/2″ x 9″, Wired- 110v 1 phase, Electric Foot Pedal, a Ettco electric terminal die, Weight- 200 lbs.
5 Ton, Alva Allan #BT-5, Mechanical clutch punch press, 1-1/4" stroke, 6-7/8" Shut Height, 1-1/2" bore
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: BT-5
Product, ALVA ALLAN 5 TON MECHANICAL CLUTCH PUNCH PRESSMODEL BT-5, TONS- 5, STROKE- 1 1/4″, SHUT HEIGHT- 6 7/8″, HOLE IN RAM- 1 1/2″, BED AREA- 6 1/2″ X 10″, NON- REPEAT MECHANICAL CLUTCH, WIRED- 115V 1PH, ***ALL ORIGINAL PAINT***.
8 Ton, Niagara #A-8, Punch Press, 1 phase, 1-1/4" stroke, 6-3/4" Shut Height, 1-1/9" adj, 11-3/4" x 7-1/2", double hand buttons
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: A-8
Product, Niagara A-8 Punch Press, Serial# 42808, Stroke- 1 1/4″, Shut Height- 6 3/4″, Adjustment- 1 1/8″, Bed- 11 3/4″ x 7 1/2″, Wired- 115/230v 1 phase, double hand buttons..
10 Ton, Rousselle #1A, mechanical clutch punch press, 208-230/460 V.
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 1A
Product ROUSSELLE MODEL 1A MECHANICAL CLUTCH PUNCH PRESSTONS- 10, STROKE-, SHUT HEIGHT-, BED AREA-, ELECTRIC- 208-230/460 3ph.
15 Ton, Rousselle #2G, Deep Throat Punch Press,
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 2G
Product.
20 Ton, Press-Rite #2, Mechanical Clutch Punch Press, 2" stroke, 2" adj., 7" Shut Height, 2" bore, 185 SPM, 2 HP
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 2
Product PRESS-RITE #2 MECHANICAL CLUTCH PUNCH PRESS MODEL.2, SERIAL., CAPACITY.20 TON, STROKE.2″, RAM ADJUSTMENT.2″, SHUT HEIGHT (SDAU).7″ (OVER BOLSTER), THROAT DEPTH.6″, BED AREA.11″ FB X 18″ LR, BOLSTER AREA.19-1/4″ X 11-5/8″ X 1-1/2″ THICK, DIA. OF HOLE IN ...more
15 Ton Benchmaster #251, Punch press, 2" stroke, 6-3/4" Shut Height, 11" x15" bolster
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Benchmaster
Model: 251
Product, BENCHMASTER MODEL 251 PUNCH PRESSTONS- 15, STROKE- 2″, SHUT HEIGHT- 6 3/4″, BOLSTER PLATE- 11″ X 15″, WEIGHT- 780 LBS, WIRED- 230/460 3PH.
.059" x 6" x 6" Diacro #2, Tab Notcher
Category: Notching Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Diacro
Model: 2
Product Diacro No. 2 Tab Notcher, Capacity 6″ x 6″ x 16ga mild steel, Weight 300 lbs.
1/8" x 9.84" x 9.84" Amada #CSW-250, Hydraulic Sheetmetal Notcher w/Coping & Radius Heads
Category: Notching Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: CSW-250
Product, Amada CSW-250 Hydraulic Sheetmetal Notcher, Capacity 9.84 x 9.84″ x 1/8″ mild steel, Currently wired 230v 3 phase, Comes with Coping & Radius Heads, Blades are all in very good condition..
10" gauge x 9" x 9" DiAcro, hydraulic notcher, 230/460 3ph, table guides/stops, blades are in good shape
Category: Notching Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Diacro
Product Diacro 9″ x 9″ Hydraulic Notcher 10ga Capacity, Wired 230/460 3ph, Blades are in good shape, Has the table guides/stops., Video coming soon..
1/4" x 8-7/8" x 8-7/8" Boschert #LB12-PN4, hydraulic notcher, 90° notch angle, 220/440v
Category: Notching Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Boschert
Model: LB12-PN4
Product Boshert Model LB12 Hydraulic Notcher, Capacity- 1/4″ Steel (3/16″ Stainless Steel), Notch Size- 8 7/8″ x 8 7/8″, Notch Angle- 90 Degree, Wired 220/440v 3ph, Blades are in good shape- small chip in bottom right blade..
1 6" gauge x 6" x 6" Diacro, Power Notcher, fresh blades
Category: Notching Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Diacro
Product DIACRO 6″ X 6″ POWER NOTCHERCAPACITY- 16GA MILD STEEL, WIRED- 115V 1 PHASE, COMES WITH A SET OF NEW BLADES.
Oil Field and Hollow Spindle Lathes
1 Result
30" x 96" Meuser #M4L-160, hollow spindle lathe, 6.32" bore, inch/metric threading, 20" 3-jaw chuck, 1998
Category: Oil Field and Hollow Spindle Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Meuser
Model: M4L-160
Year: 1998
Product Meuser Model M4L-160 Hollow Spindle Lathe, Serial# 47138, New – 1998, Swing Over Ways- 30 1/2″, Swing over Cross-Slide-, Distance Between Centers- 96″, Spindle- D1-11, Spindle Hole- 6.320″, Threading- IN/MM, Electrical- 50 hp 230-460 3ph, -Atlas 20″ 3 Jaw Chuck, -Large 14 ...more
Plastic Granulators and Pelletizer Machines
1 Result
23" x 29" Nelmor, plastic granulator, 30 HP, Rotor is in very good shape
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Nelmor
Product, Nelmor Model G12295P1 Plastic Granulator, Total Hp- 30- (2) 15hp Motors, Opening- 12 x 29″, Blades are in need of sharpening- normal wear., Rotor is in very good shape, Weight- 3000 lbs.
Polishers (Including Buffing Jacks)
1 Result
Flexible Shaft Buffer, 1.5 HP Baldor motor, 230/460 V.
Category: Polishers (Including Buffing Jacks)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product HEAVY DUTY 1 1/2 HP FLEXIBLE SHAFT BUFFERBALDOR 1 1/2hp 230/460V 3ph.
Power Squaring Shears (Gauge)
1 Result
12 gauge x 4' Niagara #44-B, Mechanical Shear, front sheet suppports, mechanical Back Gauge
Category: Power Squaring Shears (Gauge)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: 44-B
Product Niagara 48″ of 12ga Mechanical ShearWired 230/460 3ph, -Front Sheet Supports, -Mechanical Back Gauge.
Power Squaring Shears (Inch)
1 Result
1/4" x 10' Niagara #1F10-1/4, Hydraulic Shear, 36" front operated power back gauge, 24 SPM, 15 HP, good shape
Category: Power Squaring Shears (Inch)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: 1F10-1/4
Product Niagara Model 1F 10-1/4 Hydraulic Shear, Capacity- 10′ of 1/4″ Mild Steel, Power Back Gauge- 36″, Strokes Per Minute- 24, 15hp 230/460 3ph, Blades are in good shape., I will add better pictures and video as soon as I get some time..
Precision and Second Operation Lathes
4 Results
9.4" x 23.6" Schaublin #120-VM, precision lathe, 25mm collet, 3jaw 5" chuck, Steady Rest, change gears
Category: Precision and Second Operation Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Schaublin
Model: 120-VM
Product SCHAUBLIN 120-VM PRECISION LATHESwing- 240 mm (9.4″), Distance Between Centers- 600 mm (23.62″), Wired- 230v 3ph, Spindle Collet- 25 mm, -Taper Attachment, -5″ 3 Jaw Chuck, -Revolvex 4 Way Toolpost, -Steady Rest, -Drawbar & (1) 25 mm collet, -Large Amount of Change Gears, -Manual.
11" x 18" Hardinge #HLV-EM, Precision Toolroom Lathe, inch/metric, Sony digital read out, Steady Rest, 5C collet, 1990' s
Category: Precision and Second Operation Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hardinge
Model: HLV-EM
Product, Hardinge HLV-H Precision Toolroom Lathe IN/MM, Serial# 14378-T, New Early 1990’s, SPINDLE CONSTRUCTION ……………. HARDINGE BALL BEARINGSPINDLE NOSE – Hardinge Taper LockSPINDLE CAPACITY: WITH ROUND TYPE 5C COLLETS ……. 1-1/16″WITH STEP CHUCKS ...more
11" x 18" Hardinge #HLV-H, Precision Toolroom Lathe, inch/metric threading, 5" chk, Trak digital read out
Category: Precision and Second Operation Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hardinge
Model: HLV-H
Product, Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO, Serial#, SPINDLE CONSTRUCTION ……………. HARDINGE BALL BEARINGSPINDLE NOSE – Hardinge Taper LockSPINDLE CAPACITY: WITH ROUND TYPE 5C COLLETS ……. 1-1/16″WITH STEP CHUCKS ...more
Schauer 5C #LA2E, Speed Lathe
Category: Precision and Second Operation Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: LA2E
Product Schauer 5c Speed Lathe Model LA2EWired 220v 3ph, (2) Speed Motor.
Rapid-Air, Press Feeds, Many to chose from to 16"
Category: Press Feeders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Rapid-Air
Amada #TEG-160E, Punch & Die Grinder, 6.5" chk, 1.5 HP 230/460 V., 7" wheel, 1.25" hole
Category: Punch and Die Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Amada
Model: TEG-160E
Product Amada TEG-160E Punch & Die Grinder, Chuck- 6 1/2″ with ID & OD Jaws & Key, Spindle- 1 1/2 hp 230/460 3ph, Wheel- 7″ Cup with 1 1/4″ Hole.
5 Ton Benchmaster #151, punch press, 1" stroke
Category: Punches
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 151
Product BENCHMASTER MODEL 151 PUNCH PRESSTONS- 5, STROKE- 1″, SHUT HEIGHT-, BED SIZE-, WIRED 208-220/440 3PH, NON-REPEAT MECHANICAL CLUTCH, ***ALL ORIGINAL PAINT***.
35 Ton, Wasino #PUX35, punch press, 90mm stroke, 240mm die height, 55mm adjustment, 60-120 SPM
Category: Punches
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wasino
Model: PUX35
Product Wasino PUX35 Punch PressCap : 35TonsStroke : 1.97″Shut Height : 11.42″Adjustment : 2.17″SPM : 100-170Bolster : 13.78″ (R-L), 11.81″ (F-B)Main Motor- 5hp, 220v 3ph.
3' -10" Ikeda, Radial Drill
Category: Radial Drills
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Ikeda
Product, IKEDA RM-1000 RADIAL ARM DRILLColumn- 10.765″, Max Spindle Centerline to Column- 37 3/8″, Max Spindle to Table- 29″, Max Spindle to Base- 47″, Table- 24″ x 31 7/8″ x 18 1/2″ high 2″ thick top, Table Parallels- 32″ x 2″ thick x 6″ High ...more
Reciprocating Surface Grinders - Horizontal Spindle
3 Results
6" x 12" Harig, handfeed surface grinder, Walker 6" x 12" fine pole permanent magnet chuck
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Harig
Product, HARIG 6″ X 12″ HANDFEED SURFACE GRINDER (1)Walker Permanent Magnetic Chuck, Cable Feed on Table, Wired 460v 3ph, ***ALL ORIGINAL PAINT- SCHOOL MACHINE***, (2) Available.
7" x 14" K.O. Lee #S714-H, hydraulic feed surface grinder, 6" x 12" electromagnetic chuck
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: K.o. Lee
Model: S714-H
Product, K.O. Lee 7″ x 14″ Hydraulic Feed Surface Grinder, Model S714 H, Serial #26569-7E, Hydraulic Feed on the X-Axis Only, a Walker 6″ x 12″ Permanent Magnetic Chuck, Wired 230/460 3 ph, ****All original paint****, Machine was barely used and has some minor cosmetic blemishes from handling ...more
20" x 48" Okamoto #PSG-125, Column Type Surface Grinder, 15 HP
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Okamoto
Model: PSG-125
Product Okamoto 20×48″ column type hydraulic surface grinder with incremental downfeed and over the wheel dresser., factory optional 15 hp spindle motor., Can handle wheels to 18″ diameter..
Milford Deep Throat Riveter, 115 V.
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Milford
Product Milford Deep Throat RiveterCurrently set up to insert 3/16″ threaded studs in sheetmetal., Wired 115v 1 ph.
Milford Orbitform #256, Impact Riveter, for #511 rivets, w/ toolkit
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Orbitform
Model: 256
Product MILFORD ORBITFORM MODEL 256 IMPACT RIVETERSERIAL# M29229, TOOLED FOR RIVET #511, WITH TOOLKIT WITH SPARE PARTS, WIRED 120V 1PH, ***ALL ORIGINAL PAINT***.
Milford Orbitform #256, Impact Riveter, w/ toolkit
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Orbitform
Model: 256
Product MILFORD ORBITFORM MODEL 256 IMPACT RIVETERSERIAL# M18903, TOOLED FOR RIVET, WITH TOOLKIT WITH SPARE PARTS, WIRED 120V 1PH, ***ALL ORIGINAL PAINT***.
Milford Orbitform #305, Impact Riveter, for #511 Rivets, w/ toolkit
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Orbitform
Model: 305
Product MILFORD ORBITFORM MODEL 305 IMPACT RIVETERSERIAL# M26407, WIRED 115V 1PH, TOOLED FOR RIVET #511, ***ALL ORIGINAL PAINT***.
Milford Orbitform #305, Impact Riveter, for #120X190X218 Rivets, w/ toolkit
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Orbitform
Model: 305
Product MILFORD ORBITFORM MODEL 305 IMPACT RIVETERSERIAL# 48903, WIRED 115V 1PH, TOOLED FOR RIVET 120 X 190 X 218, WITH TOOLKIT WITH SPARE PARTS, ***ALL ORIGINAL PAINT***.
Milford Orbitform #58, Impact Riveter, For #598 Rivets, air actuated
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Orbitform
Model: 58
Product MILFORD ORBITFORM MODEL 58 IMPACT RIVETERSERIAL# 35956, TOOLED FOR RIVET # 598, WIRED 120V 1PH FOR THE CONTROL, AIR ACTUATED, ***ALL ORIGINAL PAINT***.
Superior Rivet #610, Impact riveter, 115 V., 2018
Category: Riveters
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Superior
Model: 610
Year: 2018
Product, SUPERIOR RIVET MACHINES MODEL 610 IMPACT RIVETERSERIAL# D1997, NEW IN JULY 2018, WIRED 115v 1ph, TOOLED FOR RIVET Diameter.210, CURRENT REPLACEMENT COST- $16K.
Rocker Arm Welders
1 Result
20 KVA Lors #120FR, Rocker Arm Spot Welder
Category: Rocker Arm Welders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lors
Model: 120FR
Product, LORS 20 KVA ROCKER ARM SPOT WELDERMODEL 120FR, PRIMARY VOLTS- 220V 1 PH, OUTPUT- 20 KVA @ 50% DUTY CYCLE.
DuroDyne #PBF, Portable Pinspotter, 1ph
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Durodyne
Model: PBF
Product DuroDyne Model PBF Portable PinspotterSingle Phase.
Engel #M-800-6, Rollfomer, 6x sets extra profile rolls, 20-22 gauge, 208/230 V., 3ph
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Engel
Model: M-800-6
Product Engel Model M-800-6 HVAC RollformerSerial# 3526-99, Has (6) Sets of Rolls for the following profiles:, -Pittsburgh Lock- 20ga, -Male & Female Snaplock- 20ga, -S-Slips- 22ga, -Drive Cleats- 20ga, -3 in 1 20ga, Wired 208/230v 3phase, Unit is in super shape with little use out of a government facility. ...more
Engel HVAC Rollformer, Slips, Drives, Pittsburg lock, 3 in 1, cliproll
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Engel
Product, Engel HVAC Rollformer, Profiles:, -S-Slips, -Drive Cleats, -3 in 1, -Pittsburgh Lock, -Cliproll, Wired 230/460v 3ph, Footprint- 34″ x 80″ x 39″, Weight- 1510 lbs.
Lockformer #Pittsburg & Double Seam 18-26 gauge capacity, wired 230/460 V. 3 phase
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lockformer
Model: PITTS/DOUBLE SEAM
Product Lockformer Acme Lock & Pittsburgh Machine, Acme Lock & Pittsburgh, Capacity: 18-26ga, Wired 230/460 3ph.
Lockformer Slips. Drives, & Pittsburgh Rollformer, High Speed Machine, 22 gauge capacity
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lockformer
Product, Lockformer Slips. Drives, & Pittsburgh Rollformer, High Speed Machine, Capacity- 22ga, Wired 230/460 3ph, Weight- 760 lbs.
Welty Way, Precision Colatch Machine, 26 gauge, 4-8" dies, round to square
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Precision
Product, Lockformer / Welty Way Colatch MachineConnects round to square or rectangle, Capacity- 26ga, Dies- 4″ -8″, Wired- 120v 1 phase.
Engel #800P, Rollformer, 5 HP, 208/230 V.
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 800P
Product ENGEL MODEL 800P HIGH SPEED ROLLFORMERFORMS PITTSBURGH LOCK & DRIVE CLEAT, HIGH SPEED MACHINE, ELECTRIC- 5 hp 208/230V 3PH.
Lockformer #D20, Rotary machine, 20" throat, 12 gauge
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: D20
Product LOCKFORMER ROTARY COMBINATION MACHINEMADE BY NOR SERVICE, MODEL D20, THROAT DEPT- 20″, CAPACITY- MILD STEEL- 12GA, WIRED 230/460 3PH, COMES WITH A GOOD SELECTION OF ROLLS.
Lockformer #Pittsburgh, Machine
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: PITTSBURGH
Product, LOCKFORMER 18GA PITTSBURGH MACHINESERIAL# 12219, CAPACITY- 16GA MILD STEEL, WIRED- 208-230/460 3PH, ***ALL ORIGINAL PAINT- MACHINE WAS BARELY USED***.
Lockformer Pittsburgh, Double Seam Rollformer
Category: Rollformers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product LOCKFORMER PITTSBURGH & DOUBLE SEAM ROLLFORMERWIRED -115V 1PH.
Rotary Table Surface Grinders - Vertical Spindle
2 Results
CMG Swisher #Mark-VI, vertical surface grinder, 8" wheel, 10" under, 6" x12" chuck
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Cmg Swisher
Model: MARK-VI
Product, CMG SWISHER VERTICAL SURFACE GRINDER MODEL- MARK VI, SERIAL# 1528, WHEEL DIAMETER- 8″, MAXIMUM HEIGHT UNDER WHEEL- 10″, A 6″ X 12″ FINE POLE ELECTRO-MAGNETIC CHUCK, WIRED- 440V 3PH.
Vertical Spindle Manual Swing Grinder Far, Vertical Swing Grinder, 6" x 12" magnetic chuck, 6 diameter cup type grinding wheels
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Mac
Product Mac Far (made in Germany) vertical swing grinder with a 6×12 magnetic chuck and 6″ diameter cup type grinding wheels (comes with several new wheels). Machine is 230v 3 phase..
13" Advance #B-13, 13" x 13" X-Y Rotary Table
Category: Rotary Tables
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Advance
Model: B-13
Product Advance 13″ x 13″ X-Y Rotary Table Model B-13, Crated 32″ x 33″ x 17″, Crated Weight 500 lbs.
Sheet Metal Beaders, Rollers and Crimpers
3 Results
16 gauge Niagara #180, Rotary Crimping & Beading Machine, 6"-18" circle cutting diameter
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: 180
Product Niagara Model 180 Rotary Crimping & Beading Machine, BURRING, TURNING, WIRING, & BENDING: 14 GA (MILD STEEL) CRIMPING: 16 GA (MILD STEEL)SLITTING: 12 GA (MILD STEEL)FLANGING THICKNESS: 14 GA (MILD STEEL)FLANGE HEIGHT (MAX): ¾”FLANGING DIAMETER RANGE: 13″ TO 48″ SPEED: 15 ...more
16 gauge Niagara #180, rotary crimping & beading machines with dies, 15 FPM
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Niagara
Model: 180
Product Niagara Model 180 Rotary Crimping & Beading Machine, BURRING, TURNING, WIRING, & BENDING: 14 GA (MILD STEEL)CRIMPING: 16 GA (MILD STEEL)SLITTING: 12 GA (MILD STEEL)FLANGING THICKNESS: 14 GA (MILD STEEL)FLANGE HEIGHT (MAX): ¾”FLANGING DIAMETER RANGE: 13″ TO 48″ SPEED: 15 ...more
12 gauge Nor Maplewood #D20, rotary beader, crimper, flanger, 20" throat, 24 FPM, 2 HP, 230/460 V., 3-phase
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Nor Maplewood
Model: D20
Product, Nor Maplewood Model D20 Heavy Duty Rotary Combination Machine, Beads, Crimps, Flanges, Tube Parting (with optional tooling), 2 hp 230/460 3ph, 12ga Mild Steel Capacity, 20″ Throat Dept, 24 F.P.M. Forming Speed, Floor Space 32″ x 50″.
Single Crank OBI Flywheel Press Machines
1 Result
20 Ton, Press-Rite #2, Mechanical OBI Punch Press, 2" stroke, 2" ram adj, 7" Shut Height, 6" throat, 185 SPM, 2 HP (5 available)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Model: 2
Product, 20 TON PRESS-RITE #2 MECHANICAL OBI PUNCH PRESS, MODEL.2, CAPACITY.20 TON, STROKE.2″, RAM ADJUSTMENT.2″, SHUT HEIGHT.7″ (OVER BOLSTER), THROAT DEPTH.6″, BED AREA.11″ FB X 18″ LR, BOLSTER AREA.19-1/4″ X 11-5/8″ X 1-1/2″ THICK, DIA. OF HOLE IN ...more
Single End Hydraulic Punch Machines
1 Result
20 Ton, Heim #TON20A, Air Clutch Variable Stroke Punch Press, 2-1/2" stroke, 145 SPM, 11-3/4" x17-3/4" bed, 10-3/4" daylight, SSC-1000 Control, 1988
Category: Single End Hydraulic Punch Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Heim
Model: TON20A
Year: 1988
Product, HEIM 20 TON AIR CLUTCH VARIABLE STROKE PUNCH PRESSSERIAL# 4244, NEW 1988, TONS- 20, STROKE- 0 – 2 1/2″, SPM- 145, BED AREA- 11 3/4″ X 17 3/4″, HEIGHT OF RAM- WITH RAM UP AND ADJUSTMENT UP- 10 3/4″, ***ALL ORIGINAL PAINT***.
20 Clausing #2275, Drill Press, 1.5 HP, 208-230/460 V., 3ph, variable speed, 19.5" x 22" table,
Category: Single Spindle Drill Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Clausing
Model: 2275
Product, Clausing Model 2275 Drill Press 20″ Variable SpeedSerial# 20-534264, Motor- 1 1/2 hp 208-230/460 3ph, Table 19.5″ x 22″, Spindle- MT#3, ***ALL ORIGINAL PAINT FROM A HIGH SCHOOL METAL SHOP- LOOKS BARELY USED***.
30" x 60" Lansing, gap bed lathe, 4-1/4" spindle hole, taper, digital read out
Category: Sliding & Gap Bed Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lansing
Product Lansing Model G30 Gap Bed Lathe, Swing Over Ways- 30″, Swing Over Gap- 42″, Swing Over Cross-Slide- 21″, Distance Between Centers- 60″, Spindle Hole- 4.3″, Spindle Taper- D1-11, Tailstock Taper- MT#6, -Taper Attachment, -Aloris DA Toolpost & Holders, -MT#6 Live Center, -Rapid ...more
26 gauge x 5' Fallsington #PR60, Stove Pipe Roller
Category: Slip Rolls
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Fallsington
Model: PR60
Product Fallsington 60″ Stove Pipe Roller, Capacity- 26ga, Wired 230/460 3ph.
Large Lathe Steady Rests Leblond & Lodge & Shipley 34", 11 Hole
Category: Steady Rests
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Steady rest that came from a shop that had old Leblond and Lodge & Shipley Lathes, The rest with the flat bottom:, 11″ Hole, 17 1/8″ from the flat on the bottom to the center, 12 3/4″ from the top of the V to the center of the flat (width of ways), PRICE $1500.
Large Lathe Steady Rests 60" Swing, 29-1/2 Bottom to Centerline, 16 Shaft diameter, 27-3/4 hole
Category: Steady Rests
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Large Lathe Steady Rests for 60″ or Larger Swing, Bottom to Centerline of Rest 29 1/2″, Center Hole 27 3/4″, Max Shaft Diameter with Current Jaws 16″, Bearings 5″ Diameter 2 3/4″ Width, Base of the Complete Rest 17 3/4″ x 47″ x 2 3/4″ thick, They were used ...more
Midwest #CD-375, Stud Welder, w/ parts & cart
Category: Stud Welders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Midwest
Model: CD-375
Product MIDWEST CD-375 STUD WELDERSTUD CAPACITY- 3/8″, SINGLE PHASE, -LARGE QUANTITY OF TIPS, -MISC STUDS, -GUN & GROUND, -ROLLING CART.
Nelson #1500i Inverter Stud Welder, 3/16" - 3/4" stud diameter range, 3 Ph 208-240V, 50/60Hz @ 60A
Category: Stud Welders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Nelson
Model: 1500I
Product, Nelson 1500i Inverter Stud Welder, Stud Diam. Range3/16″ (5mm) – 3/4″ (19mm), Weld Rate3/16″ (5mm) 30 per minute, 1/4″ (6mm) 30 per minute, 5/16″ (8mm) 30 per minute, 3/8″ (10 mm) 29 per minute, 1/2″ (13mm) 19 per minute, 5/8″ (16mm) 8 per minute ...more
No. FP201S Finn-Power, hydraulic swaging machine, 150 ton force, 2001
Category: Swaging Machines (Swagers)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Finn-Power
Model: FP201S
Year: 2001
Product, Finn Power FP-20 Swaging Machine, Model FP201S, New 2001, Maximum Crimping- 61mm, 2.67″, Maximum Crimping Force- 1500kN, 150 Tons, Maximum Hose Size- 1 1/2″, Die Set Series- 20, Weight- 1439 lbs.
200 in./lb. Detroit, Testing Machine, Tensile / Pull Tester
Category: Tensile Testers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Detroit
Product Detroit Testing Machine tensile pull type tester 200 in/lb capacity. Machine is 110v 1 phase hydraulic driven..
1/4" Waterbury-Farrel #10, Flat Die Thread Roll
Category: Thread Rollers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Waterbury-Farrel
Model: 10
Product Waterbury Farrel #10 Flat Die Thread Roll 1/4″ Capacity.
Miller #Econo, Tig Welder, w/ torch, 460 V.
Category: Tig Welders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Miller
Model: ECONO
Product Miller Econo TIG welding machine with torch (not in the pictures). Wired 460v..
Tool and Cutter Grinders
6 Results
Deckel #SO, Tool & Cutter Grinder, includes collets, wrenches, manual & factory stand
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Deckel
Model: SO
Product Deckel SO Cutter Grinder, 110v 1phase, Comes with collets, wrenches, manual & factory stand.
Deckel #SO, cutter grinder, w/ spares & tooling, 220 V.
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Deckel
Model: SO
Product DECKEL SO CUTTER GRINDERWIRED 220V 3PH, -(13) COLLETS, -SPARE WHEELS, -ORIGINAL WRENCHES, -MANUAL, ***ALL ORIGINAL PAINT***.
Deckel Soe, cutter grinder, axially adjustable wheel, w/ dust collector, 230 V., w/ tooling, on stand, AS IS
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Deckel
Product DECKEL SOE TOOL & CUTTER GRINDERAXIALLY ADJUSTABLE GRINDING WHEEL, BUILT IN DUCT COLLECTOR, WIRED- 230V 3PH, COMES WITH (7) COLLETS, WRENCHES, DIAMOND WHEEL, STAND, -LIGHT NOT WORKING.
EH Hoffman, tool cutter grinder, 5" wheel
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hoffman
Product E.H. HOFFMAN CARBIDE AND LATHE TOOL CUTTER GRINDERWHEEL DIAMETER- 5″, 230/460 3PH, WEIGHT- 235 LBS.
E Hofmann, Carbide & lathe tool cutter grinder, 5" wheel
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Hofmann
Product, E HOFMANN CARBIDE AND LATHE TOOL CUTTER GRINDERBENCH TOP MODEL, WHEEL DIAMETER- 5″, WIRED- 220/440 3PH, BOTH DIAMOND WHEELS ARE IN VERY GOOD CONDITION.
Kuhlmann, Cutter Grinder - Deckel Type
Category: Tool and Cutter Grinders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Kuhlmann
Product, Kuhlmann Cutter Grinder, Made In Germany, Deckel Copy, Uses Deckel Type Collets, Wired 110v.
Caterpillar 60, Boring Mill Toolholders, Several Types to Choose From
Category: Tool Holders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Caterpillar
Product CAT60 CNC Boring Mill Toolholders, Several Types to Choose From., Price is $895 Each.
Tooling and Accessories - Miscellaneous
3 Results
Milling Super Spacers / Indexers - Yuasa, Hartford, & Nikken
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Yuasa
Product I have several milling indexers to chose from:, (1) Nikken \- sold, (2) Sold, (3) Yuasa 8″ Super Spacer- several to choose from- $995-$1295, (4) Hartford 8″ Super Spacer with plates $1295, (5) Yuasa 5c Vertical / Horizontal Collet Indexers -several to choose from $295 – $495, (6) Hardinge 5c ...more
Set Up Blocks / Parallels for Boring Mill or Radial Drill, 100" L x 22" H
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Large Set Up Blocks for Boring Mill or Radial Drill, 100″ long, 22″ high, Approx 3500 lbs each.
Tiger Stop, Programmable Length Gauge, 2x 8' & 2x 10' (4 available)
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product, Tiger Stop Programmable Length Gauge, Common Used on Saws but can be used on just about anything, Available- (1) 8′ and (1) 6′, Price is each..
3/4" x 12" Richards, Multiform Hydraulic Bender, 230 V.
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Richards
Product, Richards Multiform Hydraulic Bender, Disc Diameter- 12″, Center Hole- 3/4″, Other Holes- 5/8″, Wired 208/230v 3ph, Designed is very similar to a Diacro #8.
2" x 9.5" Bentec #BT-3000, Hydraulic Tube & Pipe Bender, 15 Ton, 5 HP, w/ dies
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Bentec
Model: BT-3000
Product BENTEC BT-3000 HYDRAULIC BENDERRam Force: 15 TonsMotor: 5 HP, 230V 3-phaseRam Speeds: 57 IPM (Forward), 75 IPM (Reverse)Maximum Pipe Capacity: 2″ pipe up to 80″ length and 9.5″ diameter radiusSolid Bar Capacity (Round): 1.75″ x 8.25″WITH A LARGE SELECTION OF MISC DIES.
Herber Tube Bender, Comes with some misc dies approx 3/4" -1", Wired 230v 3ph, Made in Sweden
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Herber
Product Herber Tube Bending Machine, Made in Sweden, Comes with some misc dies approx 3/4-1″, Wired 230v 3ph.
Penn Bending Roll, 230/460 V., 3 phase
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Penn
Product Penn Bending Roll, Roll Diamteter- 2″, Roll Length-, Wired 230/460 3ph.
Mittler Bros, 4", Large Capacity Tube & Pipe Notcher
Category: Tube Notchers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Mittler Bros
Product Mittler Bros Large Capacity Tube & Pipe Notcher-WITH ARBORS AND CUTTERS TO 4″, WIRED 230/460 3PH, Weight- 1635 lbs.
Uncoilers and Centering Coil Reels
2 Results
2500 lb. American #60, Motorized Uncoiler, with Keepers & Wrench
Category: Uncoilers and Centering Coil Reels
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: American
Model: 60
Product American Model 60 Motorized Uncoiler, 2500# Capacity, Comes with Keepers & Wrench, 230/460 3 ph.
2500 lb. American #60, Uncoiler, with Keepers & Wrench
Category: Uncoilers and Centering Coil Reels
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: American
Model: 60
Product American Model 60 Uncoiler, 2500# Capacity with Keepers & Wrench.
Universal Milling Machine - Horizontal
1 Result
Sajo, universal horizontal milling machine, 9-1/4" x 41-3/8" table, (12) speeds 40-1800 RPM, #40 taper, 230/460 V., 3PH
Category: Universal Milling Machine - Horizontal
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Sajo
Model: 40
Product, SAJO 9 1/4″ X 41 3/8″ TABLE UNIVERSAL HORIZONTAL MILLING MACHINEMADE IN SWEDEN, TABLE- 9 1/4″ X 41 3/8″, FEEDS- 15/16 TO 36 1/16 IPM, SPINDLE SPEEDS- (12) 40-1800 RPM, UNIVERSAL TABLE, SPINDLE- 40 TAPER, WIRED- 230/460 3PH, GREAT SHAPE- CAME FROM A HIGH SCHOOL SHOP.
Vertical Band Saws
9 Results
10" x 10" Marvel #V10A, automatic tilting head vertical bandsaw, 1" W x 12' L blade, automatic barfeed
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Marvel
Model: V10A
Product Marvel V-10A Automatic Tilting Head Vertical BandsawModel : V10-A, Serial Number : D-138810-W, CAPACITY: 10” x 10”, COLUMN TILT (right): 7” x 10” @ 45 Degrees, BLADE LENGTH: 12’, BLADE WIDTH & GAUGE: 1” X.035”, FEED PRESSURE, – (HYDRAULICALLY VARIABLE): 0-250 ...more
18" x 12" Grob #4V-18, vertical band saw, 28" x 24" x 2-1/2" table, 18" throat, 1/8"-1" blade, 150" L, 3 HP, 230-460 V, variable speed 40-5000 FPM, w/ air feed, miter guide, 1974
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Grob
Model: 4V-18
Year: 1974
Product Grob Model 4V-18 Vertical Bandsaw:, Table Size 28” x 24” x 2 ½”, Heavy Cast Iron Table – Tilt 45 down right, Tilt 5 down left, Throat Depth 18”, Work Height 12”, Table Height from Floor 40”, Dimensions 45” x 43”, Height 75”, Saw Blades ...more
20" x 13" DoAll #2013-V, vertical band saw with blade welder, 26" x 26" table, 2 HP, 1994
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Doall
Model: 2013-V
Year: 1994
Product, Doall 2013-V Vertical Bandsaw, Serial # 500-94712, New 1994, Band Speed 55-5200 fpm, AC Motor Drive 2 HP- 480v 3ph, Machine Weight 1,250 lbs, Throat, Band to Column 20″, Maximum Work Height 13″, Band Width Capacity 1/8″ – 1″, Band Length 154″, Table 26″ x 26″ ; ...more
20" x 16" DoAll #2013-V, vertical bandsaw with air feed table, 1997
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Doall
Model: 2013-V
Year: 1997
Product, Doall 2013-V Vertical Bandsaw, Serial# 500-971407, New 1997, Throat 20″, Table is on linear slides and has a air feed, Wired 230/460 3 ph, Machine is in very good shape. Was in a large plant that painted all machines in each department to match..
20" DoAll #2013-20, vertical bandsaw, 20" throat, 20" x 154" blade, 208/230 V., 26" x 26" table, electrical variable speed
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Doall
Model: 2013-20
Product DOALL 20″ VERTICAL BANDSAWMODEL 2013-20, SERIAL# 377-831180, NEW- 1983, Throat size: 20”, Maximum work height: 13″, Variable band speeds, two ranges: 55 to 300 & 960 to 5,200 F.P.M, Band width, range: 1/16″ to 1″, Upper bandwheel adjustment: 3″, Band length: 154″ ...more
24" x 12" Grob #4V-24, vertical bandsaw
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Grob
Model: 4V-24
Product Grob Model 4v-24 Vertical Bandsaw, Throat Dept- 24″, Throat Height- 12″, Wired 230/460 3ph, Blade Welder, Has New Tires, 1640 lbs.
36" DoAll Zephyr #ZV-3620, High Velocity Bandsaw, 1000-15000 fpm, 15 hp, 230/460 V., 1994
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Doall
Model: ZV-3620
Year: 1994
Product, Doall Zephyr ZV-3620 High Velocity BandsawSerial# 265-94302, New 1994, Speeds- 1000-15,000 fpm, Band Length- 234″, Electric- 10 hp 230/460 3ph, Saw is in great shape., ***ALL ORIGINAL PAINT***.
36" Marvel Spartan, Vertical Bandsdaw with Welder
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Marvel
Product Marvel Spartan Vertical Bandsaw 230v 3 phase with blade welder..
20" Doall #2013-V3, electronic vertical bandsaw, variable speed, 154" blade, 2003
Category: Vertical Band Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Doall
Model: 2013-V3
Year: 2003
Product DOALL 2013-V3 ELECTRONIC VARIABLE SPEED 20″ VERICAL BANDSAWSERIAL# 526-03558, NEW- 10/03, THROAT- 20″, WIRED- 480V 3PH, BLADE LENGTH- 154″, ***ALL ORIGINAL PAINT*** CAME FROM A LARGE PLANT MAINTENANCE SHOP THAT MADE FABRIC, MITER GUIDE AND WORKPIECE PUSHER, ***VIDEO COMING SOON***.
Welding Positioners
2 Results
50000 lb. Unique / Readco welding positioner with 95" face plate
Category: Welding Positioners
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Unique
50000 lb. Unique / Readco, Welding Positioner
Category: Welding Positioners
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product.
Acorn, Welding table, 5' x 5', w/ holddowns
Category: Welding Table
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Acorn
Product ACORN WELDING TABLE 60″ X 60″HEIGHT- 32″, COMES WITH A BUNCH OF HOLD DOWNS.
Delta #Unisaw, 10"
Category: Woodworking Saws
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Delta
Model: UNISAW
Product Delta 10″ Unisaw, 3 phase.
