go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Midwest Machinery LLC

34405 W 12 Mile Rd #136
Farmington Hills, MI 48331
Gold Level Dealer
Surplus Record Dealer Since 2009

About

Midwest Machinery is Michigan based used machinery sales and brokerage firm specializing in buying and selling steel processing equipment worldwide; evolving in to a premier source for buying and selling steel processing machines of all types; including Slitting lines, Cut-to-Length Lines, Tube Mills, Roll Formers, and more.

Products & Services

  • Coil Handling/Processing Equipment
  • Cut to Length Lines
  • Rollformers
  • Slitting Lines
  • Tube Machinery & Mills

Associations & Affiliations

128 listings in 39 categories

20" Bliss, 2-Hi cold rolling mill, 1 way temper, 900 FPM

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bliss
INCLUDES:, * Uncoiler and Recoiler, * 6 sets of rolls, * 2 sets of chocks, * Mill wipe, * Sprayer System, * Exhaust System includes spray collectors, mill hoods, ducting, stack and blower, * Filter skid, * High Flow Filter Housings, * Keller Tramp Oil Removal System, * Immersion Heaters, * ACG System Fire Suppression ...more

Skoda Quatro 400/1000x800, 4-hi cold rolling mill, 260-630mm width, 8mm thick, 1985

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Skoda
Year: 1985
Rolling Mill Skoda Quarto 400/1000x800, New in 1985, Country of origin: Czech Republic, Model: Quarto 400/1000x800, Technical data:, Diameter of working milling rolls (min/max) 400/430 mm., Diameter of back up rolls (min/max) 980/1030mm, Length of rolls 800mm., Capacity of mill stands 12,5 MN, Max. Rolling speed 5,0 ...more

4-Roll Plate Bending Machines

1 Result

Parmigiani bending rolls, 4-roll, 3100mm x 65" mm, 2004

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Parmigiani
Year: 2004
Make: Parmigiani, Year New: 2004, Material Thickness: 65 mm, Top roll diameter: 600 mm, Rolls length: 3100 mm, Number of rolls: 4, Number of driving rolls: 2, Central lower roll diameter: 570, Side rolls diameter: 460, Main electrical supply:, Total installed power: 88 Kw, Hydraulic unit oil tank capacity: 1000 ...more

Arc-Welding coil joiner, 24" 72" strip, .020"-.187" thickness, sliding in-out, control station

Category: Arc Welders
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Arc-Welding
Strip Width: 24" - 72", Thickness Capacity:.020" -.187", Type: Arc Welding, Power Source: Thermal Arc 150, Sliding In & Out, Manual Open & Close, Control Station.

Banding Lines and Coil Packaging Lines

1 Result

10000 lb. Pro-Eco Coil Packaging Line, 54"

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pro-Eco
4-Arm Turnstile, Arm Length: 76", Weight Capacity: 50,000Lb, Powered Push - Off, Powered Rotation, Downlayer, Inline Discharge, 75" W x 3.5" Dia. Powered Conveyor Rolls, Pass Line: 41", Twin Hydraulic Tilt Cylinders, Hydraulic Cylinder for Horn In/Out Movement, Conveyor Section, Powered Conveyor Rolls, Conveyor ...more

6.5" Medart, tube & bar straightener, 5-rolls, 60/75 HP DC motor

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Medart
Make: Medart, Type: 3 ove 2, Vertical Design, Single Motor Drive, Serial # 1131, Diameter Capacity: 1 - 6.5, Production: Tubes and Bars, Size # 3, Drive Motor: 60/75HP 230DC, Speed: 0 - 120 feet per minute, Entry Pinch Rolls, Rolls Adjustment, Steel Frame, Approximate Weight: 50,000Lb, Condition: Good.

.075" x 60" Iowa - Herr Voss, multi-blanking line, 20000 lb., 72" OD, 20" ID, 3-leaf mandrel, 1997

Category: Blanking Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Iowa
Year: 1997
Make: Iowa Precision, Material Width: 12" - 60", Material Thickness:.010" -.075", Coil Weight: 20,000Lb, Coil ID: 20", Coil OD: 72", Direction: Left to Right, Entry Coil Car, V-shape Floor Standing Design, Powered Lift & Traverse, Mandrel Uncoiler, 3-Leaf Mandrel Design, Powered Expansion, Powered Hold - Down ...more

.135" x 72" Alcos, multi blanking line, 60000 lb., L to R, 4-arm entry turnstile, coil car

Category: Blanking Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Alcos
Make: Alcoa, Material: CRS, HRPO, EG, GL, Pre-Paint, Max Shear Strength: 50,000 PSI, Max Yield Strength: 65,000 PSI, Material Width: 12" - 72", Material Thickness:.015" -.135", Weight: 60,000Lbs, Coil OD: 12" - 72", Coil ID: 20" - 24", Stacker Weight: 20,000Lb, Max Line Speed: 250 feet per minute, Direction: L--R ...more

30000 lb. PM, C-hook with parking stand, 32" bottom arm, 43" top arm, 23" x 9" crane opening

Category: C-hooks
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pm
Weight: 15 Ton, Bottom Arm: 32", Top Arm: 43", Height: 25", Dimensions: 67" x 78" x 24", Crane Opening: 23" x 9", Parking Stand Included.

40000 lb. Bushman, 20 ton C-hook, 61" bottom arm, 69" top arm, 35" height, shared parking stand

Category: C-hooks
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bushman
Weight: 20 Ton, Bottom Arm: 61", Top Arm: 69", Height: 35", Overall Dims: 73"(L) x 80"(H) x 24"(W), Crane Hook Slot: 14" x 4", Shared Parking Stand Included.

40000 lb. Royalton C-Hook, 48" throat

Category: C-hooks
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Royalton
40,000# C-Hook, 48" Throat Depth, 34" Opening, Pin Size: 3" Diameter, Crane Hook Opening: 5 1/2" WIde x 14" Tall, Counter Weight Dimensions: 30" x 22" x 12 1/2", Plate Thickness: 4".

60000 lb. Bushman, 60 ton C-hook, 72" upper arm, 73" lower arm, 35" height, parking stand

Category: C-hooks
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bushman
Weight Capacity: 30 Ton, Upper Arm:: 72", Lower Arm Length: 73", Height: 35", Plate Thickness: 5", Dims: 86"(L) x 80"(H) x 30"(W), Unit Weight: 4,700Lb, Parking Stand Included.

80000 lb. Royal Arc coil C hook, 43" throat, 35" opening, 5" plate thickness, 3-1/2" pin diameter

Category: C-hooks
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Royal Arc
40 Ton Royal Arc C-Hook (80,000#), Serial No. 17-07-155, Throat Depth: 43", Opening: 35", Plate Thickness: 5", Pin Size: 3 1/2" Diameter, Crane Hook Opening: 5" Wide x 13 1/2" Tall, Counter Weight: 30" x 27" x 15", Crane Weight: 7,000#.

Carbide, Friction and Cold Saws

1 Result

5.12" Kaltenbach #SKL400NA, universal fully automatic miter cutting circular cold saw, SWI digital read out

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Kaltenbach
Model: SKL400NA

Bossray #SB-89CNC-3S, CNC tube bending machine, 89mm diameter, 8mm wall thickness, 2021

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bossray
Model: SB-89CNC-3S
Year: 2021
Make: Bossray Machinery, Serial 26-40-77, Model # SB-89CNC-3S, Maximum Diameter: 89mm, Max Wall Thickness: 8mm, Radius: 30 - 280 degrees, Max Bending Degree: 190 degree, Extended Pipe Length, Speed: 60 degrees per second, Feeding Drive: 2Kw Servo, Hydraulic Unit: 11Kw Motor, Oil Tank Cap: 300L, Central Lubrication ...more

20000 lb. AM Systems coil car, L-type, floor standing design

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Am Systems
Make: AM Systems, Weight Capacity: 20,000Lb, L-Type Floor Standing Design, Saddle Size: 38" x 38", Dimensions: 68"(L) x 38"(W) x 46"(H), Distance from the Floor: 12", Hydraulic Lift & Traverse.

20000 lb. Macring Machinery V-type coil car, 10000 Kg, floor standing, new, 2003

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Macring Machinery
Year: 2003
Make: Finprofile (Ukraine), Condition: New, Type: Floor Standing V-Type, Max Coil Width: 1500mm, Max Weight Capacity: 10 ton, Hydraulic Lift and Traverse, Control Panel.

20000 lb. Paxson, L-type coil car, 40" x24" saddle, hydraulic lift & traverse, hydraulic cylinders

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson
Make: Paxson, Weight Capacity: 20,000Lb, Saddle 40 (W) x 24 (L) x 21 (H), Distance from the Floor: 19", Overall dimensions 42 (W) x 64 (L) x 46 (H), Hydraulic Cylinder: 8", Control Panel.

25000 lb. Finprofile, V-type coil car, 1500mm width, hydraulic lift & traverse, new, 2024

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Finprofile
Year: 2024
Make: Finprofile (Ukraine), Condition: New, Type: Floor Standing V-Type, Max Coil Width: 1500mm, Max Weight Capacity: 25,000Lb, Hydraulic Lift and Traverse, Control Panel, 12 Months Warranty for Parts Included.

30000 lb. P/M Machinery hydraulic coil car, 18" vertical travel, hydraulic lift & traverse

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: P/m Machinery
Make: P/M (Production Machinery), Weight Capacity: 30,000Lbs, Rotating Drum Width: 29", Vertical Travel: 18", Hydraulic Lift & Traverse, Powered Rotation & Threading.

30000 lb. Paxson, L-type coil car

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson
Make: Paxson, Weight Capacity: 30,000Lb, Saddle 54.5 (W) x 35.5 (L) x 25 (H), Distance from the Floor: 19", Overall Dimensions: 57 (W) x 95 (L) x 54 (H), Push Botton Control Panel.

30000 lb. Stamco L-type coil car

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Make: Stamco, Weight Capacity: 20,000Lb, Saddle Size: 40" x 30", Distance from the Floor: 9", Dimensions: 62" x 40" x 44", Hydraulic Lift & Traverse, Control Panel Included.

50000 lb. Stamco, L type coil car, 72" entry/60" exit, hydraulic lift & traverse, control panel, 1992

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Year: 1992
Make: Stamco, Type: L-Type Floor Standing, Weight Capacity: 50,000Lb, Max Coil Width: 72" Entry / 60" Exit, Hydraulic Lift & Traverse, Self Contained Hydraulics, Dual Hydraulic Cylinders, Control Panel.

60000 lb. Rowe, V-type floor standing car

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Rowe
Weight Capacity: 60,000Lb, Coil OD: 76", V-Type Top, Powered Lift and Traverse, Self Contained Hydraulics, Flat channel wheel guides, Cat track cable guide, Operator's controls.

100000 lb. Sauer, coil transfer cart, 64" rail, 72" x 45" saddle, 2 coils, propane drive motor

Category: Coil Cars
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Sauer
Weight: 50 Ton, Overall Dims: 170" x. x 75" x 35", Rail: 64", Saddle Size: 72" x 45", Distance from the Floor: 27", Distance between Saddles: 31", Number of Coil: 2, Drive Propane Motor.

Macring, 7-roll coil straightener, 4" work roll diameter, 48" x .135", vari-speed, 2023

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Macring
Year: 2023
Make: Macring Machinery (Ukraine), Number of Work Rolls: 7, Work Rolls Diameter: 4", Material Width: 300mm - 1250mm, Maximum Material Thickness: 4mm, Adjustable Work Rolls, Entry Driven Pinch Rolls, Exit Pinch Rolls, Variable Speed AC Motor, Control Panel / Electrical Drive.

Entry line, Dahlstrom, 13" x 6000 lb., coil car, mandrel uncoiler, coil straightener

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dahlstrom
Model: ENTRY LINE
Make: Dahlstrom, Material Width: 4" - 13", Material Thickness:.125" -.250", Coil Weight: 6,000Lb, Coil ID: 18" - 24", Coil OD: 62", Entry L-Type Coil Car, Hydraulic Lift and Traverse, Max Lift: 15", Mandrel Uncoiler, Powered Hold-Down Roll, Air Cooled Brake, 2HP Feed. Up Motor, Powered Mandrel Expansion, Sliding Base ...more

40000 lb. Cady, motorized coil grab, motorized open/close, ID protective arms

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cady
Make: Cady, Serial # 10403ECM, Weight Capacity: 40,000Lb, Coil Width: 12" 72", Motorized Open / Close, ID Protective Arms, Less Parking Stand.

60000 lb. Drafto #41-1024, motorized coil grab, 12"-80" coil width, 1991

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Drafto
Model: 41-1024
Year: 1991
Make: Drafto, Year: 1991, Model: 41-1024, Serial # CLS290, Coil Width: 12" - 80", Weight: 60,000Lbs, Unit Weight: 6,400Lb.

60 Ton, Aogang, coil transfer cart, 120000 lb., new, build to order, 2024

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Year: 2024
Weight: 120,000Lbs, Dimensions: 6000mm x 2000mm x 800mm, Rail Center: 1435mm, Motors: 4Kw (2), Wheels Diameter: 500mm, Power: 380V 50Hz.

Capital Engineering Inc., 1250mm 6-Hi reversing cold rolling mill, 800 meter/min., 2012

Category: Cold Roll Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Capital Engineering
Year: 2012
Make: Capital Engineering Inc (China), Year Built: 2012, Type: Reversing Cold Rolling Mill, Speed: 800 meters per minute, Maximum Material Width: 1250mm, Material Thickness: 2.5mm - 3mm, Product Material Thickness: 0.3mm - 0.6mm, Work Rolls (mm): 280 x 1450 x 2641, Intermediate Rolls (mm): 390 x 1390 x 3530, Back Up ...more

60" x .075" Rowe Herr Voss, Cut-To-Length line line, 20000 lb., 72" OD, 20" ID, 4-leaf mandrel, powered hold-down roll, 6-rolls, 220 FPM

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Rowe
Make: Rowe / Herr Voss, Material Width: 12" - 60", Material Thickness:.020" -.075", Weight Capacity: 20,000Lb, Coil ID: 20", Coil OD: 72", Speed: 220 feet per minute, Sheet Max Length :16', Direction: Left to Right, Entry Coil Car, Floor Standing V-Type Design, Powered Lift & Traverse, Control Panel, Mandrel ...more

60" x .135" Dahlstrom Cut-To-Length line, 20000 lb., L to R, entry coil car, mandrel uncoiler, coil straightener

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dahlstrom
Coil Width: 12" - 60", Material Thickness:.015" -.135", Weight Capacity: 20,000Lb, Coil ID: 20" - 24", Coil OD: 72", Speed: 180 feet per minute, Direction: Left to Right, Entry Coil Car, Floor Standing V-Type Design, Mechanical Lift and Traverse, Mandrel Uncoiler, Make: American Steel, 3-Leaf Mandrel Design, Powered ...more

60" x .187" Pro-Eco, Cut-To-Length line with cassette type precision leveler, 50000 lb.

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pro-Eco

72" x .075" Rowe - Herr Voss Cut-To-Length line line, 40000 lb., 6-Hi precision leveler, high speed shear, stacker

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Rowe
Make: Rowe / Herr Voss, Material Width: 12" - 72", Material Thickness:.020" -.075", Weight Capacity: 40,000Lb, Coil ID: 20", Coil OD: 72", Speed: 160 feet per minute, Sheet Max Length :12', Direction: R-L, Entry Coil Car, Floor Standing V-Type Design, Powered Lift & Traverse, Control Panel, Mandrel Uncoiler ...more

72" x .135" Herr Voss Wysong, Cut-To-Length line, 40000 lb., 20"-24" ID, L to R, L type coil car, uncoiler

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Make: Herr Voss - Wysong, Material: CR, HR, Stainless, Aluminum, Material Width: 12" - 72", Material Thickness:.030" -.135" (-030 -.187" @ 60"), Weight Capacity: 40,000Lb, Coil ID: 20" - 24", Coil OD: 72", Direction: L-R, Speed: 200 feet per minute, Entry L-Type Coil Car, Make: Sauer, Hydraulic Lift & Traverse ...more

94" x .314" Herr Voss Cut-To-Length line, 2400mm x 8mm, 25000 Kg, L to R, entry coil car, double mandrel uncoiler, 1997

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Year: 1997
Make: Herr Voss, Year New: 1997, Material Width: 750mm - 2400mm, Material Thickness: 2mm - 8mm, Coil Weight: 25 ton, Coil ID: 400mm - 600mm, Coil OD: 1700mm, Direction: L-R, Mode: Stop / Start, Sheet Length: 1000mm - 7000mm, Entry Coil Car, Pit Type Design, Powered Lift and Traverse, Control Panel, Double Mandrel ...more

Bigwood Cut-To-Length line, 300-2000mm strip width, 3-12.5mm thickness, R to L, 1985, revamped 2008

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bigwood
Year: 1985
Make: BIGWOOD, Year: 1985 (2008 revamped), Maximum strip width: 2000 mm, Minimum strip width: 300 mm, Metal thickness: 3-12.5mm, Maximum coil weight: 30t, Direction: right to left, Maximum sheet length: 7000 mm, Line consist of:, 1. Coil storage, 2. Pit mounted coil car, 3. Double head decoiler, 4 Snubber frame/Peeler ...more

Bronx Cut-To-Length line, 1500" mm x 5" mm. x15 ton, 4-Hi precision leveler, mandrel uncoiler, flying shear, stacker

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bronx
Make: Bronx, Material: CR, HR, P&O, Galvanized, Material Width: 400mm - 1500mm, Material Thickness: 1mm - 5mm, Coil Weight: 15 ton, Coil ID: 508/610/700mm, Coil OD: 2000mm, Working Speed: 45 meters per minute, Sheet Length: 500mm - 4000mm, Direction: Left to Right, Entry Coil Car, L-Type Floor Standing Design ...more

Loopco, Cut-To-Length line, 1900" mm x 13" mm, 70000 lb., L to R, hydraulic pit type coil car, double cone uncoiler

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Loopco
Make: Loopco Industries, Material: HR, CR, Width: 750mm - 1900mm, Material Thickness: 1.25mm - 13mm, Coil Weight 30 Ton, Coil ID: 508mm - 760mm, Coil OD: 2000mm, Max Yield: 310 N/mm2, Max Shear Strength: 390 N/mm2, Speed: 120 - 328 feet per minute, Direction: L - R, Hydraulic Pit Type Coil Car, Double Cone Uncoiler ...more

Muhong, Cut-To-Length line, 2000" mm x 20" mm, 35000 Kg, R to L, entry coil car, double mandrel uncoiler

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Muhong
Material Width: 500mm - 20000mm, Material Thickness: 8mm - 20mm, Coil Weight: 35 ton, Coil ID: 410mm - 650mm, Coil OD: 1800mm, Direction: Right to Left, Entry Coil Car, Hydraulic Lift and Traverse, V-Type Floor Standing Design, Double Mandrel Uncoiler, Powered Hold Down Roll, Sliding Base, Pneumatic Brake, Sliding ...more

Redman Cut-To-Length line, 2000" mm x 13" mm x 20000 Kg, R to L, 20 meters/minute, 120 HP DC motor

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Redman
Make: Redman, Material Width: 600mm - 2000mm, Material Thickness: 6mm - 13mm, Coil Weight: 20 ton, Coil ID: 460mm - 760mm, Coil OD: 1800mm, Max Speed: 20 meters per minute, Production Mode: Stop / Start, Direction: R-L, Entry V-Type Coil Car, Double Mandrel Uncoiler, Hold-Down Roll, Hydraulic Peeling Table, Driven ...more

Spotti Cut-To-Length line with Flying shear, 1550" mm x 6" mm, 25 ton, R to L, coil car, uncoiler, leveler

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Spotti
Make: Sergio Spotti SRL (Italy), Material: HR, CR, Galv, Material Width: 400mm - 1550mm, Material Thickness: 1.5mm - 6mm, Coil Weight: 25 ton, Coil ID: 550mm - 880mm, Coil OD: 1900mm, Sheet Length: 300mm - 13,000mm, Direction: R-L, Entry Pit Type Coil Car, Powered Lift and Traverse, Control Panel, Double Cone Type ...more

10000 lb. x 72" O.D., Pro-Eco downlayer, 90° side discharge, hydraulic up/down, push button Control

Category: Downlayers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pro-Eco
Make: Pro-Eco, 90 degrees Side Discharge, Coil Width: 72", Weight Capacity: 12,000Lb, Hydraulic Up / Down, Hydraulic Horn In / Out, Push Botton Control Station.

10000 lb. Wean downlayer, 42" x 62" bed, hydraulic drive, self contained hydraulics

Category: Downlayers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Wean
Make: Wean, Weight Capacity: 10,000Lb, Size: 42" x 62", Overall Dimensions: 8'(L) x 4'(W) x 5'(H), Hydraulic Drive, Self - Contained Hydraulics, Control Station.

Dahlstrom, edge trimmer & scrap chopper, 72" x .105"

Category: Edge Trimmers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dahlstrom
Make: Dahlstrom, Material Width: 12" - 72", Material Thickness:.010" -.105", Edge Trimming Head with Tooling, Scrap Chopper.

6" x .1" PM Machinery, coil to coil edging line, 2500 lb. capacity, mandrel uncoiler, recoiler

Category: Edging Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pm Machinery
Gauge Range:.015" -.125", Width Range: " - 6", Weight Capacity: 2500Lb, Set of Edging Heads, Mandrel Uncoiler, Recoiler with Over-Arm.

.25" x 72" Bradbury high speed shear

Category: Hi-speed Shears
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bradbury
Make: Bradbury, Blade Width: 80", Max Material Thickness:.250", Pass Line: 60", Wichita Cooled Brake, 40HP AC Motor.

14 gauge x 60" Wysong #HS1460, high speed shear, Wichita clutch & brake, 200 SPM, 8 HP

Category: Hi-speed Shears
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Wysong
Make: Wysong, Model: HS1460, Material Thickness: 14 guage, Material Width: 60", Bow-Tie Blade, Wichita Clutch & Brake, Motor: 8HP Baldor, Needs New Clutch.

6' Coil Joiner, Arc-Welding, 24"-72" width,.020"-.187" thickness, sliding in-out

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Arc-Welding
Strip Width: 24" - 72", Thickness Capacity:.020" -.187", Type: Arc Welding, Power Source: Thermal Arc 150, Sliding In & Out, Manual Open & Close, Control Station.

API #X60, Spiral pipe mill, 3000mm x 25mm, 2022

Category: Pipe Machinery
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Api
Model: X60
Year: 2022
Material to be used: Hot rolled coil, carbon steel API X70-Grade / PSL-2, Yield strength: Max 68.0 Kg/mm2, Strip width: 900mm ~2,000mm, Strip thickness: 6.0(t)mm~25.4(t)mm, Coil outside diameter: 1,200mm~ 2,200mm, Coil inside diameter: 762mm, Coil weight: Approx. 30ton, Coil maximum camber: Max 25.0mm/10.0m, Coil ...more

CMM, 3300mm x 22mm spiral pipe mill, 90 ton/8 hours output, updated drives, 2019

Category: Pipe Machinery
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cmm
Year: 2019
Year New: 2019, Material: Q235, Pipe Diameter: 711mm - 3300mm, Material Thickness: 4mm - 22mm, Pipe Length: 8m - 24m, Coil Width: 650mm - 1800mm, Coil ID: 508mm - 900mm, Coil OD: 1200mm - 2100mm, Coil Weight: 30 ton, Spiral Angle: 40 - 80 degrees, Welding Speed: 0.5 - 2 mpm, Output: 90 ton / 8 hours, Double Cone ...more

.177" x 10' Amada #M-3045, mechanical shear, 1" rake angle, 60 SPM, 13 hold downs, 20 HP

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Amada
Model: M-3045
Make: Amada, Model: M-3045, Material Width: 10', Material Thickness:.177", Rake Angle: 1", Speed: 60 SPM, Electrics: 460 / 230V / 3Ph / 60Hz, Thirteen (13) Hold Downs, Back Guage, Squaring Arm, Electric Foot Pedal, Motor: 20HP.

1/4" x 12' Cincinnati #1812, mechanical shear, 4" gap, 12 hold downs, automatic lube, 60 SPM

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cincinnati
Model: 1812
Material Length: 12', Material Thickness: 1/4", Model: 1812, Serial # 30782, Gap: 4", Speed: 60 spm, Auto Lube, Number of Hold-Downs: 12, Electric Foot Pedal, Motor: 15HP AC.

.312" x 6' Wysong #630RKB, mechanical shear, 60 SPM, Wichita air clutch & brake

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Wysong
Model: 630RKB
SERIAL #: P-109-102, MODEL: 630RKB, CAPACITY: 0.312" MILD STEEL, 0.210" STAINLESS, 72" WIDE CAPACITY, 60 STROKES PER MINUTE, 20 CUTS PER MINUTE, BOW TIE TOP BLADE, 74" LONG x 0.875" THICK, STRAIGHT BOTTOM BLADE, 73" LONG x 4" WIDE x 0.875" THICK, 76" BETWEEN FRAMES, WICHITA AIR CLUTCH, WICHITA AIR BRAKE, AC DRIVE ...more

3/8" x 12' Pacific #375R12, hydraulic shear, electric back gauge, 12.5' btwn housing

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pacific
Model: 375R12
Make: Pacific, Serial # 1090, Model: 375R12, Maximum Width: 12', Material Thickness: 14g - 3/8", Knife Length: 144, Distance Between Housing: 12.5, Electric Back Gage.

Precision Levelers

2 Results

48" x .08" Herr Voss, 6-Hi precision leveler, 19 work rolls, 1.5" work roll diameter

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Make: Herr Voss, Type: 6-Hi Precision Leveler, Work Rolls Width: 54", Material Thickness:.028" -.080", Material Width: 12" - 48", Number of Work Rolls: 19, Work Roll Diameter: 1.500", Up & Down Adjustable Back Up Flights, DC Motor and Drive, Electrics, Controls, Electrical Drive, Spare Set of New Work Rolls.

60" x .06" Herr Voss, 4-Hi precision leveler, 21 work rolls, 1.156" work roll diameter, 100 HP

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Make: Herr - Voss, Type: 4-Hi Precision Leveler, Work Rolls Width: 72", Work Rolls Diameter: 1.156", Thickness Capacity:.015" -.060", Number of Work Rolls: 21, Powered Up and Down Back Up Flights, Powered Work Rolls Adjustment, Driven Pinch Rolls, Motor: 100HP / 1750 - 2000 rpm, Spate Set of New Work Rolls.

30" x .035" Herr Voss #VSEB36/1.156/17/5/4hi/RH, 4-Hi precision leveler, 17 rolls, 100 FPM

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Model: VSEB36/1.156/17/5/4H
Make: Herr-Voss, Serial # 53124-01A, Model: VSEB 36/1.156/17/5/4Hi/RH, Work Roll Width: 36", Work Roll Diameter: 1.156", Number of Work Rolls: 17, 50,000PSI Max Yeild, Speed: 100 feet per minute, Up & Down Back Up Flights, Independent Rolls Adjustment, Jog Forward and Reverse, Electrical Drive / Control Panel.

60" x .075" Herr Voss, 6-Hi precision leveler, 12"-60" width, .020"-.075" thickness, 1.5" roll diameter

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Make: Herr Voss, Model: 66/1.500 /19/7-6Hi, Material Width: 12" - 60", Material Thickness:.020" -.075", Work Roll Diameter: 1.500", Speed: 160 feet per minute, Number of Work Rolls: 19, Number of Back Up Flights: 7, Motor: 60HP / 1745 - 2320 - 2400 Baldor, Electrics: 460V 60Hz 3Ph, Electrics, Hydraulics, Controls ...more

60" Paxson, 6-Hi precision leveler, 19 work rolls, 1.625" work roll diameter, driven entry pinch rolls

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson
Make: Paxson, Material Width: 12" - 60", Material Thickness:.015" -.135", Work Rolls Width: 72", Type: 6-Hi Precision Leveler, Number of Work Rolls: 19, Work Roll Diameter: 1.750", Eight (8) Flights of Back Ups, Driven Entry Pinch Rolls, Motorized Open / Close, Adjustable Back Up Flights, DC Motor / Variable Speed ...more

72" x .135" Herr Voss #VKL-84/2.187/19/7, 6-Hi precision leveler, (19) 84" W x 2.187" diameter work rolls, 150 HP DC drive, 1999

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Herr Voss
Model: VKL-84/2.187/19/7
Year: 1999
Herr Voss 6-Hi Precision Leveler, Year New: 1999, Model: VKL-84/2.187/19/7/6-Hi, Work Rolls Width: 84", Work Rolls Diameter: 2.187", Number of Work Rolls: 19, Up & Down Adjustable Back Up Flights, Motor: 150HP DC Drive, Inc Jet Coder.

6000 lb. Fata Hunter #20214-0400-61, recoiler, 20" width, 16" ID, 72" OD, powered push-off

Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fata Hunter
Make: Fata Hunter, Model: 20214 - 0400 -61, Material Width: 20", Weight Capacity: 6,000Lb, Coil ID: 16", Coil OD: 72", Powered Push - Off, Hydraulic Expansion, Powered Hold-Down Roll, Motor: 25HP 500 / 1650 RPM Reliance.

15000 lb. Stamco, recoiler with hold-down roll, 30"

Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Make: Loopco, Material Width: 8" - 30", Weight Capacity: 15,000Lb, Coil ID: 20", Coil OD: 72", Powered Hold-Down Roll, Sliding Base, Powered Expansion, Motor: 75HP DC / 650 / 1950 RPM.

30000 lb. Loopco, recoiler, DC motor with gear box, 60"

Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Loopco
Make: Stamco, Material Width: 12" - 60", Coil Weight: 30,000Lbs, Coil ID: 16" - 20", Coil OD: 72", DC Motor & Gear Box, Good for Rewinding Line.

40000 lb. American Steel Line, recoiler, 69" drum width, 20" ID, 72" OD, powered hold down roll, 100 HP

Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: American Steel Line

6 Stand, Fisher #F3, seam panel roll former

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fisher
Model: F3
Year: 2023
Main Technical Data:, Dimensions: 1600x850x1000mm, Weight: 250 kg, Motor Power: 1.5kw, Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz, Forming Steps: 6 steps, Forming Steel Thickness: 0.4-0.7mm, Forming Aluminum Thickness: 0.7-1.0mm, Height of Roofing: 25mm, Material Width: 250-700mm, Tolerance: +-1mm, Roller material: ...more

9 Stand, Fisher #MPF-1 Auto, dura fence panel rollforming line, uncoiler, cut-off shear

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fisher
Model: MPF-1

9 Stand, Stud & Track Roll Forming Line, uncoiler, 4-post cut-off press

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Make: Dahlstrom, Number of Stands: 9, Shaft Diameter: 1.5", Roll Space: 16", Chain Driven Stand, Mandrel Uncoiler, Material Edge Guides, 9-Stand Roll Former, 2-Stand Straightener, 4-Post Cut-Off Press, 13' Run-Out and End Table, Onrom PLC and Controls, Electrics, Hydraulics, Controls, Tooling.

10 Stand, Fisher #SL-1, snap lock roll former

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fisher
Model: SL-1
Year: 2023
Main Technical Data: Dimensions: Main Technical Data: Dimensions: 1600x850x1000mm Weight: 400 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Stands: 10 Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Lock Height: 26mm or 31mm Tolerance: +-1mm Roller material: high ...more

16 Stand, Finprofile, C & U & Z Purlin rollforming line, 20 meters/minute, 2023

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Finprofile
Year: 2023
Make: Finprofile (Ukraine), Profile: C, U, Z Purlin, Number of Stands: 16, Maximum Material Width: 490mm, Material Thickness: 1mm - 3mm, Coil Weight: 4,000kg, Coil ID: 480mm - 620mm, Coil OD: 1500mm, Speed: 20 meters per minute, Entry Coil Car, Floor Standing Design, Powered Lift and Traverse, Mandrel Uncoiler ...more

18 Stand, Sunjin C-channel roll forming line, coil car, uncoiler, 200 ton punching press, 1993

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Sunjin
Year: 1993
Make: Sunjin (Korea), Year New: 1993, Material Width: 250mm, Material Thickness: 3.2mm, Coil Weight: 4,000kg, Coil ID: 506mm, Coil OD: 1700mm, Direction: L-R, Entry Coil Car, Mandrel Uncoiler, Powered Hold Down Roll, 200 Ton Punching Press, Coil Straightening Machine, 18-Stands Roll Former, Individual Gear Boxes ...more

20 Stand, Rollform C-channel roll forming line, coil car, uncoiler, punching press, 2020

Category: Rollformers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Rollform
Year: 2020
Make: Rollformer Co Ltd (Korea), Year New: 2020, Material Width: 350mm, Maximum Material Thickness: 3.2mm, Coil Weight: 5,000kg, Coil ID: 508mm, Coil OD: 1500mm, Direction: R-L, Speed: 20 meters per minute, Entry Floor Standing Coil Car, Powered Lift & Traverse, Madrel Uncoiler, Powered Expansion, Powered Hold - ...more

Yoder scrap chopper, 42" wide x .135" thick, 5 HP, 1750 RPM

Category: Scrap Choppers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Yoder
Make: Yoder, Serial #: 9238, Type: Scrap Chopper, Maximum Material Thickness:.135", Opening: 42 Wide, Overall Dimensions: 97(L) x 23 (W) x 34 (H), Motor: 5HP, 1750 RPM.

Stamco scrap baller. 3/16"

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Make: Stamco, Material Thickness: 3/16" @ 50,000PSI, Type: Scrap Baller, Year: 2002, Speed: 98 - 520 feet per minute, Assembly: Left Hand.

13" x .25" Dahlstrom #513-250-5, coil straightener, 5-rolls, 10 HP, 460/3/60

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dahlstrom
Model: 513-250-5
Material Width: 13", Thickness:.125" -.250", Midel: 513-250-5, Number of Work Rolls: 5, Motor: 10HP, Voltage: 460/3/60, Controls: 115V.

20000 lb. Aogang, motorized sheet lifter, 72", new, build to order, 2024

Category: Sheet Lifters
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Year: 2024
Make: Aogang, Year: New, Build per Order, Weight Capacity: 20,000Lb, Max Width: 96", Motorized Width Adjustment, Approximate Unit Weight: 1850Lb.

20000 lb. Burro, motorized sheet lifter, 72" width, motorized with adjustment

Category: Sheet Lifters
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Burro
Make: Burro Crane Inc., Serial # 8774, Weight Capacity: 20,000Lbs, Max Width: 72", Motorized Width Adjustment.

20000 lb. Bushman, motorized sheet lifter, 2003

Category: Sheet Lifters
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bushman
Year: 2003
Make: Bushman, Year New: 2003, Model: 5600, Weight Capacity: 20,000Lb, Max Width: 80", Motorized Width Adjustment, Unit Weight: 1850Lb.

12" x .125" Bliss slitting line, 4000 lb., knives & tooling, complete

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Bliss
Make: Bliss, Material Width:.075" - 12", Material Thickness:.008" -.125", Weight Capacity: 4,000Lb, Coil ID: 16" - 20", Coil OD: 72", Direction: Right to Left, Mandrel Uncoiler, Make: Littell, Mandrel Width: 18", Manual Expansion, Drag Type Brake, Slitting Head, Arbor Diameter: 3", Powered Arbor Adjustment, Sliding ...more

14" x .06" Ruesch slitting line, 6000 lb.

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Ruesch
Ruesch Precision Slitting Line, Model 149 Integral Slitter - Recoiler Assembly, SERIAL #: 5867, Line is fully refurbished and in running condition., Capacity: 14" x 0.005" - 0.060", Line Direction: Right to Left, Consisting of:, -Uncoiler: Rowe, Capacity: 7,500 lbs, Model: 7520-DS/L, Manual Expansion: 17" - 20", 27.5" ...more

30" x .11" Tishken slitting line, 10000 lb., R to L, mandrel uncoiler, slitting head, recoiler

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Tishken
Make: Tishken, Material Width: 30, Gauge:.010 110, Weight Capacity: 10,000Lbs, Coil ID: 16-20, Coil OD: 62, Direction: Right to Left, Mandrel Uncoiler, 4-Leaf Mandrel Design, Mandrel Width: 38.5, Coil ID: 18" - 20", Hydraulic Expansion, Wichita Tension Brake, Sliding Base, Slitting Head, Entry Driven Pinch Rolls ...more

48" x .135" Yoder slitting line, 30000 lb., R to L, entry coil car, dual cone uncoiler, pinch rolls

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Yoder
Make: Yoder, Material Width: 12" - 48", Material Thickness:.020" -.135", Coil ID: 16" - 24", Coil OD: 60", Weight: 30,000Lb, Direction: Right to Left, Entry Coil Car, Hydraulic Lift & Traverse, Dual Cone Uncoiler, Powered Brake, Feed-Up Motor, Driven Pinch Rolls, Adjustable Edge Guides, Slitting Head, Arbor ...more

54" x 5" Loopco slittling head, 41.5" pass line, swing head design, entry pinch rolls

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Loopco
Make: Loopco, Arbor Width: 54", Arbor Diameter: 5", Pass Line: 41.5", Design Swing Head, Entry Pinch Rolls, Adjustable Edge Guides, Adjustable Arbors (Vertical Top Screw), 5HP Feed Up Motor, 3HP DC Helper Drive.

59" x .098" Fimi loop slitting line, 1500mm x 2.5mm, 15000 Kg., 1990

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fimi
Year: 1990

60" x .135" Cincinnati - Forte slititng line, 20000 lb., 72" OD, 16"-24" ID, 600 FPM, L to R

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cincinnati
Make: Cincinnati - Forte, Material Width: 12" - 60", Material Thickness:.010" -.135", Weight Capacity: 20,000Lb, Coil ID: 16" - 24", Coil OD: 72", Speed: 600 feet per minute, Direction: Left to Right, Entry 4-Arm Turnstile, Powered Rotation, C-Hook Slot, Entry L-Type Coil Car, Hydraulic Lift & Traverse, Self - ...more

60" x .135" Yoder, slitting line, 40000 lb., pull through, electrics & drives

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Yoder
Make: Yoder, Material Width: 12" - 60", Material Thickness:.010" -.135", Weight Capacity: 40,000Lb, Coil ID: 20" - 24", Coil OD: 72", Pull Through Type, Entry V-Type Coil Car, Powered Lift & Traverse, Mandrel Uncoiler, Powered Hold-Down Roll, Feed-Up Motor, Powered Expansion, Wichita Brake, Sliding Base, Hydraulic ...more

60" x .187" Paxson loop slitting line, 50000 lb.

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson
Make: Paxson, Material: Cold Rolled, Hot Rolled, Stainless, Galv., Coil Width: 60", Gauge Capacity:.020" -.187", Weight Capacity: 50,000Lbs, Coil ID: 20" / 24", Coil OD: 72", Direction: Right to Left, 3-Position Entry Coil Ramp, Mechanical Traverse & Push, Pit-Type Coil Car, Hydraulic Lift, Double Stub Uncoiler ...more

60" x .625" McKay slitting line, 100000 lb., 16" arbor diameter, (2) 250 HP drives

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Mckay
Make: McKay, Coil Thickness:.065" -.625", Maximum Material Width: 66", Weight Capacity: 100,000Lb, Coil ID: Entry 24" - 30" / Exit 30", Coil OD: 90", Speed: 30 - 150 fpm / 90 - 450 fpm, Direction: Left to Right, Pit Type Coil Car, Hydraulic Lift & Traverse, Double Mandrel Uncoiler, Powered Hold-Down Roll, Sliding ...more

63" x .34" HJ slitting line, 50000 lb., L to R, coil car w/coil skid, uncoiler, coil peeler

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Hj
Year of Manufacture: 2002, Make: HJ ENG,KOREA, Raw Material: HR Coil, Tensile Strength: Max. 50Kg/mm2, Yield Strength: Max. 30Kg/mm2, Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT, Coil Width: Min. 400mm ~ Max. 1,650mm, Coil Weight: Max. 25,000Kg, Coil Inside Diameter: 508mm, Coil Outside Diameter: Min. 1,000mm ~ Max. ...more

65" x .236" Elmaksan, loop slitting line, 1650mm x 6mm x 24000 Kg, lots of tooling

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Elmaksan
Make: Elmaksan (Turkey), Year New: 2008 / Refurbished 2015, Material Width: 500mm - 1650mm, Material Thickness: 1mm - 6mm, Coil Weight: 24,000kg, Coil ID: 500 - 800mm, Coil OD: 720mm - 1850mm, Direction: Left to Right, Entry Pit Type Coil Car, Double Mandrel Uncoiler, Self - Standing Hold Down Roll, Hydraulic Peeling ...more

72" x .187" Paxson, loop slitting line, 50000 lb., 2 slitting heads, driven slitter, rotary tension stand

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson
Make: Paxson, Material Width: 12" - 72" (Uncoiler 60"), Material Width:.010" -.187", Coil Weight: 50,000Lb, Coil ID: 20" - 24", Coil OD: 72", Speed: 500 /1000 fpm, Direction: Right to Left, Material Strength: 40,000 yield / 50,000 psi shear, Material: CR, HR, Galvanized, Entry Transfer Cart, Mechanical Traverse, Entry ...more

72" x .187" Paxson, slitting line, 60000 lb., R to L, knifes & tooling, 1970' s, updated controls 2000' s

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Paxson

72" x .187" Universal slitting line, 20000 lb., L to R, entry floor standing coil car, L-type dsgn

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Universal
Material Width: 12" - 72", Material Thickness:.015" -.187", Coil Weight: 20,000Lb, Coil ID: 20", Coil OD: 72", Direction: Left to Right, Entry Floor Standing Coil Car, L-Type Design, Hydraulic Lift & Traverse, Mandrel Uncoiler, Powered Hold-Down Roll, Hydraulic Expansion, Air Cooling Brake, Sliding Base, Hydraulic ...more

Fisher #SM-1250-8, 1250" mm x 1" mm sheet slitting head, 2023

Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Fisher
Model: SM-1250-8
Year: 2023
Number of Cuts: 8, Material Width: 1250mm, Maximum Material Thickness: 1mm, Motor: 1.1Kw, Power Supply 380V.

Tube and Pipe Cut Off Machines

1 Result

Oto Mills tube cut-off machine, 127mm x 7mm

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Oto

Tube Machinery - Miscellaneous

1 Result

Heaven, 5" x .187" tube re-cut machine, 1993

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Model: HEAVEN
Year: 1993

Aogang #76/4, HF Tube Mill, 76mm x 4mm

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Model: 76/4
Year: 2023
Make: Aogang, Condition: Brand New (Never Used), Mill Diameter: 21mm - 76mm, Material Thickness: 0.8mm - 4mm, Square Tube: 20 x 20 - 60 x 60, Material: HR, CR, Galv,., Tensile Strength: 520 Mpa / Yeild: 240Mpa, Mill Speed: 100 meters per minute, Double Mandrel Uncoiler, Powered Rotation, Coil ID: 480mm - 520mm, Coil ...more

Aogang, 102" mm x 4" mm tube mill (mill only), 100 meters/minute, brand new, never used

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Make: Aogang, Condition: Brand New (Never Used), Mill Diameter: 25mm - 102mm, Material Thickness: 0.8mm - 4mm, Square Tube: 20 x 20 - 80 x 80, Strip Width: 80mm - 320mm, Material: HR, CR, Galv,., Tensile Strength: 520 Mpa / Yeild: 240Mpa, Mill Speed: 100 meters per minute, Direction: Left to Right, Double Mandrel ...more

API HF tube mill, 406" mm x 14" mm, floor standing V-type coil car, mandrel uncoiler, 2006

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Api
Year: 2006
Year New: 2006, Material Grade: X70 / X52, Pipe Diameter: 4.5" - 16", Wall Thickness: 4mm - 14mm, Pipe Length: 6m - 14m, Coil Width: 1350mm, Coil OD: 2200mm, Coil Weight: 25 ton, Four (4) Entry Storage Area, Floor Standing V-Type Coil Car, Mandrel Uncoiler (5.5Kw Drive), Automatic Shear & End Welder, Coil ...more

DMC Tech ERW tube mill, 63" mm x 4" mm, coil car, uncoiler, shear & end welder, more, 2019

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dmc
Year: 2019
Make: DMC Tech (Korea), Year New: 2019, Tube Diameter: 21mm - 63mm, Wall Thickness: 1mm - 4mm, Coil ID: 508mm - 610mm, Coil OD: 1200mm - 2020mm, Coil Width: 68mm - 200mm, Tube Length: 4000mm - 12000mm, Line Speed: 25 - 120 mpm, Power: 220V / 380V, Material Storage, Three (3) Coils Capacity, Floor Standing Coil Car ...more

ETF #ERW Tube Mill, 63x2mm, 200 KW Thermatool welder, cut-off press, Kent vertical accumulator

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Etf
Model: ERW
Male: AEF (American Electric Fusion), Tube Diameter: 15mm - 63.5mm, Material Thickness: 0.5mm - 2mm, Tube Length: 6 meters, Double Mandrel Uncoiler, Powered Rotation, Tension Brake, Feed-Up Motor, Entry Shear & End Welder, TIG Power Supply, Vertical Accumulator, Make: Kent, Driven Entry and Exit Pinch Rolls, Strip ...more

Korea Ind. HF tube mill, 63" mm x 3" mm, 2003

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Korea Ind
Year: 2003
Make: Korea Ind., Year New: 2003, Tube Diameter: 15.9mm - 63.5mm, Wall Thickness: 0.5mm - 3mm, Tube Length: 4 - 14 meters, Line Speed: 20 - 120 meters per minute, Double End Mandrel Uncoiler, Coil Width: 190mm, Coil OD: 1800mm, Coil ID: 505mm, Coil Weight: 2.5 ton, Entry Crop Shear & CO2 Welder, Floop Type ...more

Meyung Jin HF Tube Mill, 145" mm x 6" mm, 140 meters/minute, L to R, 2005

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Meyung Jin
Year: 2005
Make: Meyung Jin (Korea), Year New: 2005, Product: Round & Profile, Tube Diameter: 50mm - 145mm, Wall Thickness: 1.5mm - 6.5mm, Coil Weight: 12 ton, Coil Width: 150mm - 520mm, Speed: 140 meters per minute, Welder Capacity: 500Kw, Direction: Left to Right, Floor Standing V-Type Coil Car, Single Mandrel Uncoiler ...more

Ome, tube forming & sizing mill, 323" mm x 8" mm, L to R, 35 meters/minute, new

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Ome
Make: Ome (Italy), Material: HR, CR, Galv, Condition: New, Tube Diameter: 168mm - 323mm, Wall Thickness: 2mm - 8mm, Direction: L-R, Speed: 35 meters per minute, FORMING MILL, Pass N. 1 Driven Forming # 1, Pass N. 2 Driven Forming # 2, Pass N. 3 Driven Forming # 3, Pass N. 4 Driven Forming # 4, Pass N. 5 Driven Forming ...more

Oto Mills HF tube mill, 127" mm x 6" mm

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Oto
Make: Oto Mills, Year New: 1999, Pipe Diameter: 25mm - 127mm, Wall Thickness: 1mm - 6mm, Coil Weight: 7 ton, Line Direction: Left to Right, Coil Storage Area, Mandrel Uncoiler, Coil ID: 450 - 660mm, Powered Expansion, AC Motor Feed Up, Coil Entry Pinch Rolls, Coil Edge Guides, Entry Shear & Welder, Pit Type ...more

Seojin ERW tube mill, 165" mm x 6" mm, L to R, 20-60 MPM, forming mill, welding section, 2018

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Seojin
Year: 2018
Make: Seojin Ltd (Korea), Year New: 2018, Pipe Diameter: 76.3mm - 165.2mm, Wall Thickness: 1.4mm - 6mm, Profile Size: 60 x 60 - 150 x 150, Speed: 20 - 60 mpm, Pipe Cut Tolerance: 2mm, Max Pipe Length: 16 meters, Direction: L-R, Entry Floor Standing Coil Cat, Mandrel Uncoiler, Powered Hold Down Roll, Strip Shear and ...more

VAI HF Tube Mill with automatic packaging line, 127mm x 5mm

Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Vai
Year: 2000
Make: VAI (Austria), Year New: 2000, Tube Diameter: 30mm - 127mm, Wall Thickness: 0.9mm - 5mm, Speed: 100 meters per minute, Direction: Right to Left, Material Yield: 235 Mpa, Tooling: 17 sets, Round, Square, Rectangular, Entry Coil Car, Floor Standing V-Type Design, Powered Traverse & Lift, Mandrel Uncoiler ...more

30000 lb. Ranger #2TS-30-48, 2-arm turnstile, 48" arm length, powered rotation

Category: Turnstiles
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Ranger
Make: Ranger, Model #: 2TS-30-48, Serial #: P-73052, Type: 2-Arm, Weight Capacity: 30,000Lb, Arm Length: 48, Overall Dimensions: 160 (L) x 48 (W) x 60 (H), Floor to Bottom of the Arm: 29, Floor to Top of the Arm: 43.

40000 lb. Cincinnati, 3-arm turnstile

Category: Turnstiles
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cincinnati
Cincinnati Entry Turnstile, 3 Arms, 40,000 lb. x 60" Wide Capacity Each Arm, (1) Arm 42" Long w/6" Wide C-Hook Slot, (2) Arms 48" Long (Welded Extensions), Passline: 63.50" from Top of Arm to Floor, Powered Rotation via Hydraulic Motor.

6000 lb. Colt mandrel uncoiler, 12" width, 15"-20" ID, 60" outside dimensions, powered mandrel expansion

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Colt
Make: Colt, Serial #: 1201649, Type: Automatic Centering Reel, 3-Leaf Mandrel Design, Material Width: 12, Weight Capacity: 6,000Lb, Coil ID: 15-20, Coil OD: 60, Powered Mandrel Expansion, Air Tension Brake, AC Feed Up Motor.

20000 lb. Dahlstrom uncoiler & coil car, 12" -72" W, 72" outside dimensions, 16"-26" ID, entry coil conveyor

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Dahlstrom
Make: Dahlstrom Ind, Material Width: 12" - 72", Weight Capacity: 20,000Lb, Coil ID: 16" - 26", Coil OD: 72", Entry Coil Conveyor, Floor Standing V-Type Coil Car, Mechanical Lift and Traverse, Cone-Type Uncoiler, Feed-Up Motor, Motorized Brake, Sliding Base, Powered Hold-Down Roll.

20000 lb. McKay uncoiler, 67" width, 16"-22" ID, 84" outside dimensions, 4 leaf mandrel design, powered expansion

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Mckay
Maximum Coil Weight: 20,000Lb, Maximum Coil Width: 67", Coil I.D. Range: 16 22, Maximum Coil O.D: 84, 4-Leaf Mandrel Design, Powered Expansion, Pneumatic Tension Brake, Feed Up Motor.

20000 lb. Production Machine, mandrel uncoiler, 60" width, 15"-21" ID, 72" outside dimensions, hydraulic expansion

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Production Machine
Material Width: 60", Coil Weight: 20,000Lb, Coil ID: 15" - 21", Coil OD: 72", Free Standing Hold Down Roll, Hydraulic Expansion, Sliding Base, Motorized Brake (50HP).

20000 lb. Stamco uncoiler, 52"

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco

25000 lb. Finprofile, mandrel uncoiler, 67" width, 21"-25" ID, 59" outside dimensions, hydraulic mandrel expansion, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Finprofile
Make Finprofile Co (Ukraine), Condition: New, Weight Capacity: 25,000Lb, Material Width: 300mm - 1700mm, Coil ID: 480 - 530mm / 580 - 630mm, Coil OD: 1500mm, Hydraulic Mandrel Expansion, Powered Hold-Down Roll, Feed-Up Motor: 5.5Kw, Ultrasonic Loop Sensor, Overall Dimensions: 2000mm x 1785mm x 1970mm, Unit Weight ...more

30000 lb. McKay uncoiler, 69" width, 72" outside dimensions, 20" ID, hydraulic expansion, powered hold down

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Mckay
Make: McKay, Model: 69-3903-11, Mandrel Width: 69", Weight Capacity: 30,000Lb, Coil ID: 20", Coil OD: 72", Powered Hold-Down Roll, Hydraulic Mandrel Expansion, AC Feed-Up Motor, Air Cooled Brake, Self - Contained Hydraulics, Two Leafs Cut to Handle Paper Cores.

50000 lb. Yoder Recoiler, 60" width, 24" ID, 72" outside dimensions, Powered Expansion

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Yoder
Make: Yoder, Drum Width: 70", Coil Weight Capacity: 50,000Lbs, Coil ID: 24", Coil OD: 72", Hydraulic Push-Off, Powered Mandrel Gripper, Falk Gear Box, Machine does not have a Motor.

Macring mandrel uncoiler, 10000 Kg, 1500mm width, 530-630mm ID, 1500mm outside dimensions, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Macring
Make Finprofile Co (Ukraine), Condition: New, Weight Capacity: 10,000kg, Material Width: 300mm - 1500mm, Coil ID: 480 - 530mm / 580 - 630mm, Coil OD: 1500mm, Hydraulic Mandrel Expansion, Powered Hold-Down Roll, Feed-Up Motor: 5.5Kw, Ultrasonic Loop Sensor, Overall Dimensions: 1855mm x 1785mm x 1970mm, Unit Weight ...more

7000 lb. Zem Makina, mechanical upender, 60" width, 80" OD, 1.5 KW, new, 2024

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Zem Makina
Year: 2024
Make: Zem Makina (Turkey), Condition: New, Weight Capacity: 7,000Lb, Coil OD: 80", Coil Width: 60", Motor: 1.5Kw, Electrics and Controls.

10000 lb. Aogang, mechanical upender, 72" width, 72" OD, chain driven design, 1.5 HP, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Make: Aogang Machinery, Condition: New, Weight Capacity: 10,000Lb, Coil Width: 72", Coil OD: 72", Chain Driven Design, 1.5HP Motor Drive.

10000 lb. Cagle, mechanical upender, 60" OD, 48" x48" platform, 56" x54" base, 1 HP, 2024

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Cagle
Year: 2024
Weight Cap: 10,000Lb, Coil OD: 60", Platform Size: 48" x 48", Base Size: 56" x 54", Heavy Duty Structural Construction, UHMW Coil Protective Pads on V Section, Motor: 1HP AC with Brake, 230/460V / 3 Phase Electrics, Pendant with 10' Cord, New, in Stock, Ready for Loading.

10000 lb. PM Machinery, hydraulic upender, 38" x45" V-saddle, 46" x48" flat side, control panel

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pm Machinery
Weight Capacity: 10,000Lb, Hydraulic Design, Overall dimensions 52 (W) x 98 (L) x 67 (H), V-Sadle: 38" x 45", Flat Side: 46" x 48", Control Panel.

20000 lb. Aogang, mechanical coil upender, 72" width, 72" OD, chain driven design, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Make: Aogang Machinery, Condition: New, Weight Capacity: 20,000Lb, Coil Width: 72", Coil OD: 72", Chain Driven Design, 2HP Motor Drive, Heavy Duty Chain thru Motor & GearboxMake: Aogang Machinery, Condition: New, Weight Capacity: 20,000Lb, Coil Width: 72", Coil OD: 72", Chain Driven Design, 2HP Motor Drive, Heavy ...more

40000 lb. Aogang, mechanical coil upender, 72" width, 72" OD, chain driven design, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Make: Aogang Machinery, Condition: New, Weight Capacity: 40,000Lb, Coil Width: 72", Coil OD: 72", Chain Driven Design, 10HP Motor Drive, Heavy Duty Chain thru Motor & Gearbox, Controls, Drawings and Manuals, 12 Months Warranty for Parts.

40000 lb. Aogang, mechanical upender, 72" width, 72" OD, chain driven design, 10 HP, new

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Aogang
Make: Aogang Machinery, Condition: New, Weight Capacity: 40,000Lb, Coil Width: 72", Coil OD: 72", Chain Driven Design, 10HP Motor Drive, Heavy Duty Chain thru Motor & Gearbox, Controls, Drawings and Manuals, 12 Months Warranty for Parts.

40000 lb. Avon, hydraulic up-ender

Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Avon
Make: Avon, Condition: New, Coil Width: 12" - 72", Coil OD: 72", Weight Capacity: 40,000Lb, Roll discharge tilt platforms Shifting saddles, Pallet-centering systems, Load and unload conveyors, The load platform of a hydraulic upender can accommodate a variety of equipment for secondary handling functions.