back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Machinery International Corp

20 Commerce Dr
North Branford, CT 06471-1250
Platinum Level Dealer
Surplus Record Dealer Since 1945

About

Machinery International Corporation is the successor to McMillan Conroy Machinery. Same great people - same great service - but an entirely new company structured to accomodate the changing needs of our customers worldwide.

Machinery International Corp. is one of the world's largest suppliers of used metalworking machinery, specializing in equipment to manufacture ferrous and non-ferrous strip, tube, wire, rod, and bar. Be sure to visit our current inventory for a listing of our available machinery. If you do not see a machine you are looking for, please feel free to give us a call specifying your exact requirements.

Machinery International Corp. maintains its main corporate office in North Branford, Connecticut, U.S.A., approximately Ninety minutes from New York City. With a satellite office in Birmingham, England, warehouses in the U.S.A. and England, a network of sales agents around the globe, and machines worldwide, Machinery International Corp. can provide equipment to you no matter where you are in the world.

Products & Services

  • Appraisers, Machinery & Equipment
  • Coil Handling/Processing Equipment
  • Cut to Length Lines
  • Plant Liquidations
  • Rolling Mills
  • Slitting Lines
  • Tube Machinery & Mills
  • Wire Machinery

Associations & Affiliations

49 listings in 19 categories

8" 8" mm) x 8" (204mm) Fenn, 2 high, 20 HP, #13364

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
MACHINE 13364.

8" x 8" Fenn, highly versatile 2-hi reversing slab/coil mill with AGC, 50-1200 FPM

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
MACHINE# 13729.

1-7/ 8" x 8" x 8" Fenn, dual handwheels screwdown, rclr/payoff mill mounted, #6433

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
1-7/8" X 8" X 8" FENN, DUAL HANDWHEEL SCREWDOWN, RCLR/PAYOFF MILL MOUNTED . Our stock number: 6433.

5" x 10" x 10" Stanat, bonding mill, 25 HP DC, power screwdowns, rclr, #10647

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Stanat
5" x 10" x 10", STANAT, 25 HP DC, POWER SCREWDOWNS . Our stock number: 10647.

Waterbury-Farrel, 10 stand tandem, .781" -.300", 7" x 2" W, #11357

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Waterbury-Farrel
7" x 2" W., WATERBURY FARREL, 10 STAND, .781"-.300" (19.8-7.62mm),Coiler . Our stock number: 11357.

1-3/8" Bigwood #RS, Square MS, 2 section straightener, #12462

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bigwood
Model: RS
MACHINE # 12462.

2-1/4" Bronx #BR4, 2 roll rotary straightener, #12556

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bronx
Model: BR4
MACHINE # 12556.

2-1/2" (65mm) Bronx #6CR5BW, 6 roll rotary tube, non or ferrous, #13585

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bronx
Model: 6CR5BW
2 1/2" (65mm) Bronx 6CR5BW 6 Roll Rotary Tube Straightener (13585).

2-1/2" Bronx #HDT2, 7 roll straightener, #12692

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bronx
Model: HDT2
MACHINE # 12692.

C Frame Hydraulic Press Machines (Gap Frame)

1 Result

15 Ton, Denison Multipress #HA15C97D03A33A68, hydraulic press, 15 HP

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Denison
Model: HA15C97D03A33A68
(1) Second Hand 15 Ton Dension Hydraulic Press (13908).

Draw Benches

1 Result

50000 lb. Vaughn, 2-die for solid bar, 38' draw, 150 HP

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Draw Benches
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Vaughn

6" x 4" Tishken #ST2-CO2, 2 stand, wire shaping & cut off, #12686

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Edging Lines
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Tishken
Model: ST2-CO2
MACHINE # 12686.

800 Ton, UBE oil hydraulic extrusion press, updated 2008, #13073

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Ube
MACHINE # 13073.

1800 Ton, Lombard, 150/203mm billet diameter, 1.5-38mm/sec extrusion speed, #12457

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Lombard
MACHINE # 12457.

2000 Ton, Watson Stillman #3186-D, copper & rod press, #13086

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Watson Stillman
Model: 3186-D

Fastener Engineers Engineering #DTM-03-20, 20", #11934

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fastener Engineers
Model: DTM-03-20
MACHINE# 11934.

Fastener Engineers Eng, vari-drive, 20" da -03-2020, #4989

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fastener Engineers
Machine # 4989.

2000 lb. Progressive #620-SM-RH, traversing take up, #10579

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Progressive
2000 Lb., PROGRESSIVE, No. 620SM-RH,TRAVERSE TAKE UP . Our stock number: 10579.

10000 lb. Paxson, 16" x 42" drum, hydraulic push-off, manual clamp & expansion

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Paxson

20000 lb. Aetna Standard, hydraulic push-off, manual gripper & expansion, #13656

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Aetna
MACHINE# 13656.

20000 lb. Herr, 42" mandrel length, 20" mandrel diameter, hydraulic push-off, power expansion, manual gripping

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Herr
MACHINE# 13657.

20000 lb. Paxson, 48", with overarm separator, 60 HP, #6583

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Paxson
20,000 Lb. x 48", PAXSON, RECOILER, W/OVERARM SEPARATOR, 60 HP, HYD. Our stock number: 6583.

20000 lb. Wean Manufacturing, 54" mandrel, 48" width, 60" outside dimension, 16"-20" ID range, hydraulic push-off

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Recoilers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Wean
MACHINE #13645.

8-1/2" Waterbury-Farrel #ZR15-8-1/2, 12 high Sendzimir rolling mill, #1610

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Waterbury-Farrel
Model: ZR15-8-1/2
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL. Our stock number: 1610.

8-1/2" Waterbury-Farrel #ZR16 8-1/2, 12 Hi, 30 HP drive, 15 HP rclrs, #10018

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Waterbury-Farrel
Model: ZR16
MACHINE # 10018.

25" Waterbury-Farrel #ZR19-25, Sendzimir 12-Hi cold reversing mill, stainless, #13051

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Waterbury-Farrel
Model: ZR19-25
MACHINE# 13051.

10" x 2-5/8" National Standard slitting line, finger set up, #12674

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Slitting Lines
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: National
MACHINE# 12674.

12" x 2-5/8" Ruesch #76, dual arm take up common base, #12673

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Slitting Lines
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Ruesch
Model: 76
MACHINE# 12673.

24" x 4-1/8" Ruesch #146, 6000 lb. coils, ring type, #12672

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Slitting Lines
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Ruesch
Model: 146
MACHINE# 12672.

36" x 5" Paxson, 3-interchangeable heads, 20000 lb. complete line, #11230

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Slitting Lines
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Paxson
MACHINE# 11230.

Swaging Machines (Swagers)

10 Results

1/2" (12mm) Torrington #211-SS, stationary die rotary swager, 3/16" solids, #11607

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Torrington
Model: 211-SS

7/8" Torrington #312, 2 die rotary, 3/8" solids, #12202

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Torrington
Model: 312
Our stock number: 12202. 7/8" TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8 SOLIDS, W/C HEAD.

1-1/2" Abbey Etna #1515RA, 2 die, 15" die length, #11443

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Abbey Etna
Model: 1515RA
1 1/2", ABBEY ETNA MODEL 1515RA, 2 DIE, 15" LONG . Our stock number: 11443.

1-3/4" (44mm) Fenn #3-1/2F-10, rotary swager 2 die rotary, #11710

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
Model: 3-1/2F-10
MACHINE# 11697.

2" Fenn #4-1/2F, 15" long, 2 die, #10580

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
Model: 4-1/2F
2", FENN MODEL 4 1/2F-15" LONG, 2 DIE SWAGER, CAP. 2" TUBE . Our stock number: 10580.

2" Mitchell, 12500 lb., hydraulic push pointer, #11228

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Mitchell
2", MITCHELL, 12,500 LB., 1982, HYDRAULIC PUSH POINTER . Our stock number: 11228.

2-1/8" Standard / Fenn #4A, 2 die, 1-1/8" tube capacity, 5/8" solids capacity, #6805

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Standard
Model: 4A
2 1/8", STANDARD/FENN 4A- 2 DIE, SOLIDS 5/8" . Our stock number: 6805.

3-1/2" (89mm) Torrington #1047, solid 1-3/8" (35mm), 2 die, #13706

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Torrington
Model: 1047

Torrington rack and pinion feed, originally mounted on a model 1047 swager, #13478

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Torrington
MACHINE #13478.

Swager feed, air over oil type, originally mounted on a Torrington 3-1/2, #12526

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
MACHINE #12526.

Tube and Pipe Cut Off Machines

1 Result

1/8" - 1-3/4" Bertolette #315, tube cut off line, #6152

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bertolette
Model: 315
MACHINE # 6152.

20000 lb. Paxson, 40" wide, 14"-16" ID, 5 HP DC, sliding base, #10608

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Paxson
20000 Lb., PAXSON, 14/16" ID, 5HP DC . Our stock number: 10608.

12" Vaughn #8SD, 10/13 HP DC, #10536

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Vaughn
Model: 8SD
MACHINE #10536.

3/ 4" x 4" x 2" BHS Torin #2/4 hi wire flattening mill, Vollmer gauges, #11722

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Bhs Torin
MACHINE #11722.

6" x 1-1/2" Stanat, 2-hi wire flattening, 15 HP DC, #12319

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Stanat
MACHINE #12319.

6" x 3-1/2" Tishken #STR30-C02HW, wire flattening & cut off, #10421

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Tishken
6" X 3 1/2" TISHKEN MODEL STR30-C0-2HW WIRE FLATTENING AND CUT OFF . Our stock number: 10421.

6" x 4" Stanat, with straightener, payoff, take-up, #7144

Machinery International Corp | North Branford, CT | Steve McMillan |
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Stanat
6" x 4", STANAT, W/STRAIGHTENER, PAYOFF, TAKE-UP, VARI-SPEED . Our stock number: 7144.

1/2" Morgan #500, 9 groove continuous wire pointer, #11160

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Wire Pointers
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Morgan
MACHINE #11160.

Fenn #5U, universal type 0.437" max square, #11672

Machinery International Corp | North Branford, CT | Steve McMillan |
Category: Wire Turksheads
Seller: Machinery International Corp
Location: North Branford, CT
Mfr: Fenn
Model: 5U
MACHINE 11672.