Machinery Exchange International
Posen, IL 60469-1523
Surplus Record Dealer Since 2025
Contact
Ryan Wehrle
About
Our company was founded by Tom Pavlos, a seasoned expert with over 40 years of experience in the precision-formed parts industry.We take pride in our deep industry knowledge and commitment to exceptional customer service. Specializing in buying and selling equipment, we also offer appraisals, financing, and are always exploring new opportunities to better serve our customers.
Our inventory includes a diverse selection of equipment, from boltmakers to wire drawers, and we’re dedicated to helping you find the right solution for your needs.
Give us a call today—we’d love to discuss how we can assist you!
Products & Services
- Bolt & Nut Machinery
- Rollers, Thread
163 listings in 48 categories
Microair #MX3510, Air Cleaner, 26" width x 26" H x 69" L, 2.6-20 Amps, 120-575 V
Category: Air Cleaners
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Microair
Model: MX3510
MODEL MX 3510 Input volts: 120/208-230/460/575v, 60Hz Max current: 20 Amps (at 120V, 1 1â„2 HP, single phase) 5.2 Amps (at 208-230V, 1 1â„2 HP, 3 phase) 2.6 Amps (at 460V, 1 1â„2 HP, 3 phase) 6.8 Amps (at 208-230V 2 HP, 3 phase) 3.4 Amps (at 460V, 2 HP,3 phase) 9.6 ...more
Yih Shun #WA-14B, Nut Washer Assembly Machine, M6-M8 capacity, 130 PPM, 2 HP, 208 V, 2016
Category: Assembly Machines
Seller: Machinery Exchange International
Location: Posen, IL
Model: WA-14B
Year: 2016
New in 2016 Barely used in excellent condition Nut washer assembly machine WA-14B : M6~M8 130 PPM 2HP Includes the following Tooling fixed in the Machine: Nut Vibrator M8 Washer Vibrator M8 Nut Slide M8 Nut Guide M8 Nut Feeder M8 Washer Feeder M8 Washer Slide M8 Inside & Outside Support Ring M8 Die M8.
Automatic Drilling and Tapping Machines
1 Result
Universal Automatic #AD, Double Ended Driller, 3/4 HP, 3450 RPM, 1972
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Universal
Model: AD
Year: 1972
Double Ended Model AD 3/4 HP Heads 3450 RPM SN 1368 1972.
Bed and Knee Milling Machines - Vertical
1 Result
WB Knight #40, Miller, 12" x 39" T-Slot Work Table, 220 V
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Knight
Model: 40
No. 40. 12″x39″ T slot work table 220V 3PH Est. Weight 6500lbs..
3/4" Hilgeland #ME-6, Trimming Machine, 100 PPM, 1978
Category: Bolt Head Trimming Machine
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hilgeland
Model: ME-6
Year: 1978
100PPM, 1978, VIDEO LINK #1, VIDEO LINK #2.
5/8" x 12" National #1012, 4-die long stroke boltmaker, 65 PPM, IFO transfer
Category: Bolt Makers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Model: 1012
Original, Maximum Cutoff Diameter – 5/8″ alloy steel, Cutoff Diameter – 3/4″ mild steel, Maximum Die Knockout – 9-5/8″, Maximum Die Knock Out when Trimming – 8″, PKO Stroke – 1-7/8″, Pieces per Minute – 65 Previous, Owner Tested, 1012-4D-LS BM, MAX. ...more
1.6" x 8.7" Nedschroef #BV6, 4-Die Boltmaker, 2.3" stroke, 115 PPM, sound attenuated enclosure, rebuilt, 2018
Category: Bolt Makers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nedschroef
Model: BV6
Year: 2018
Max. Cutoff Diameter (85,000 PSI): 27 mm, Max. Cutoff Length: 220 mm, Max. Die Knockout: 180 mm, PKO Stroke: 58 mm, Heading Tonnage: 360 metric tons, Max. Production Rate: 115 PPM, S, Timed knockouts in all stations, IFO transfer system, Integrated threading station, SK monitoring system, Sound enclosure, Includes ...more
Butt and Flash Welders
1 Result
Microweld #J6S, Butt Welder, 3/8" diameter, truck mount, casters
Category: Butt and Flash Welders
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Microweld
Model: J6S
Stock Range Size (Diameter) 0.187 to 0.375 inches (4.7 to 9.5) mm (Steel Alloys, Stainless), Standard Operating Voltages 220 V, Input Power Cycle 60 Hz, Line Demand at 50% Duty Cycle (230 volts) 86 Amp, Heat Selection Switch, 6 Point Single Phase Transformer (at 50% Duty Cycle) 20.0 KVA, 4-Wheel Truck Mounted ...more
3M-Matic, Case Sealer, 30 cases/min., 4.75"-21.5" H x 4.75"-21.5" width Box Size, 6" min. Box length, 65 lb. Box weight
Category: Carton Sealer
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: 3m
Applications Automated Carton Sealing, Box Closure, and Primary Packaging, Packaging Station, Packing Product in Batches Brand 3M-Matic Color Gray Consumer Label No Drive System Side Belt Industries Food and Beverage, Industrial, Medical, MRO, Paper, Print Machine Type Uniform Sized Boxes Material Epoxy Powder Coated ...more
20" x 10" Hsin Der #STM-20, Centrifugal Oil Separation System for Parts, 25 lbs. capacity, 604 mm overall height, 5 HP, 1450 RPM, 2016
Category: Centrifuges
Seller: Machinery Exchange International
Location: Posen, IL
Model: STM-20
Year: 2016
Model STM-20 Centrifugal Oil Separation System for Parts, Economical machines built to reclaim oil by centrifugally spinning parts., 3 Point base provides stability and shock absorption., Does not require cement base and can be placed anywhere., Custom riser bases for added height included, 25LB Capacity, 508mm x ...more
20" x 10" Hsin Der #STM-20, Centrifugal Oil Separation System for Parts, 25 lbs. capacity, 604 mm overall height, 1450 RPM, no motor, 2016
Category: Centrifuges
Seller: Machinery Exchange International
Location: Posen, IL
Model: STM-20
Year: 2016
Model STM-20 Centrifugal Oil Separation System for Parts, Economical machines built to reclaim oil by centrifugally spinning parts., 3 Point base provides stability and shock absorption., Does not require cement base and can be placed anywhere., Custom riser bases for added height included, 25LB Capacity, 508mm x ...more
20" x 10" Hsin Der #STM-20, Centrifugal Oil Separation System for Parts, 25 lbs. capacity, 604 mm overall height, 5 HP, 1450 RPM, 2001
Category: Centrifuges
Seller: Machinery Exchange International
Location: Posen, IL
Model: STM-20
Year: 2001
Model STM-20 Centrifugal Oil Separation System for Parts, Economical machines built to reclaim oil by centrifugally spinning parts., 3 Point base provides stability and shock absorption., Does not require cement base and can be placed anywhere., Custom riser bases for added height included, 25LB Capacity, 508mm x ...more
20" x 10" Hsin Der #STM-20, Centrifugal Oil Separation System for Parts, 25 lbs. capacity, 604 mm overall height, 5 HP, 1450 RPM, 2015
Category: Centrifuges
Seller: Machinery Exchange International
Location: Posen, IL
Model: STM-20
Year: 2015
Model STM-20 Centrifugal Oil Separation System for Parts, Economical machines built to reclaim oil by centrifugally spinning parts., 3 Point base provides stability and shock absorption., Does not require cement base and can be placed anywhere., Custom riser bases for added height included, 25LB Capacity, 508mm x ...more
#UT-S07, Tipper Type Parts Centrifuge
Category: Centrifuges
Seller: Machinery Exchange International
Location: Posen, IL
Model: UT-S07
Main Motor: AC220V 750W 50/60HZ, Reverse Motor: AC220 60W 50/60HZ, CAPACITY: 1.8L Cycle, Like-New Condition, 240v 3ph.
CNC Vertical Bed Mills
1 Result
Bridgeport #Series-II, CNC Mill, 38" x 15" Table
Category: CNC Vertical Bed Mills
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Bridgeport
Model: SERIES-II
Centroid M-Series CNC Controller 38×15 table Fully functional.
.098" x .7" Nakashimada #MH-05, DSSD cold header, 200-250 PPM
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nakashimada
Model: MH-05
2.5mm Max. Cutoff Diameter, 18mm Max. Cutoff Length, 12mm Max. Shank Length, 10mm Max. PKO Stroke 1st Punch, 5mm Max. PKO Stroke 2nd Punch, 200/250 PPM.
.3" x 7.08" Nakashimada #H20GSPL, 1D2B Header, 70 PPM, 4 HP
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nakashimada
Model: H20GSPL
Max Cutoff Diameter 7.5mm, Max Cutoff Length 180mm, Shank Length 75 – 155, Cutoff Die 20 x 35 (dia x length) Die 50 x 190, 1st Punch 28 x 57, 2nd Punch 40 x 64, 1st Punch KO Stroke 22, 2nd Punch KO Stroke 18, Production Speed 70ppm, Main Motor 7.5kw (4P), Lubrication Oil Reservoir 45 L.
5/16" x 2-3/4" National #1D2B, High-Speed Header, 250 PPM, 20 HP, w/ PKO
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Model: 1D2B
Cutoff Diameter 5/16″, Shank Length 1 1/2″, Cutoff Length 2 3/4″, Pieces Per Minute 250, Electrics 20 HP 220/440 Volts AC Motor, Bushing Cutoff, PKO, Process Monitor.
5/16" x 2.75" National, 1D2B High-Speed Header w/PKO, 250 PPM, 1.5" Shank length, 20 HP, 220/440 V
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Cutoff Diameter 5/16″, Shank Length 1 1/2″, Cutoff Length 2 3/4″, Pieces Per Minute 250, Electrics 20 HP 220/440 Volts AC Motor, Bushing Cutoff, PKO, Process Monitor.
5/16" x 4.5" National, DSSD Cold Header, 125 PPM, 3.25" K.O. length, 7.5 HP
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
5/16″ Maximum Cutoff Diameter, 4-1/2″ Maximum Cutoff Length, 3-1/4″ Maximum Kickout Length, 125 PPM, Electrics: 7-1/2 HP, AC Motor & Controls, Dual plane wire straightener, Comes with: Pallet of spare tooling.
3/8" x 3" National, 1D2B Cold Header, 100 PPM
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Maximum Cutoff Diameter: 3/8″, Maximum Shank Length: 1-3/4″, Maximum Cutoff Length: 3″, Maximum Production Rate : 100 PPM, 220V.
3/4" x 7" Hilgeland #CH-6VA, 1D2B Cold Header, 56 PPM, 1978
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hilgeland
Model: CH-6VA
Year: 1978
3/4″ Cutoff Diameter, 7″ Cutoff Length, 56 PPM.
0.55" x 6.7" Asahi Okuma #AOT-12L-7-110, 2D2B Long Stroke Header, sound attenuated enclosure, 120 PPM, w/ stripper, 1987
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: AOT-12L-7-110
Year: 1987
Maximum Wire Diameter –.550″, Maximum Cut-Off Length – 6.693″, Minimum Cut-Off Length – 1.562″, Maximum Die Knockout – 5.125″, Minimum Die Knockout – 2.000″, Maximum Pko Stroke – 1.000″, Heading Tonnage – 120 Tons, Production Rate – ...more
5/16" National #1D2B, High-Speed Double Stroke Header, w/ PKO, 4379 hours
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Model: 1D2B
460v 3ph 60hz, 30.8 FLA.
Conveyor and Pass Through Parts Washer
1 Result
Osborne #PWD-1250, Inline Parts Washer, 12" diameter x 30" L drum, perforated, 50 gallon (2 available)
Category: Conveyor and Pass Through Parts Washer
Seller: Machinery Exchange International
Location: Posen, IL
Model: PWD-1250
Voltage Requirement: 480V, – Full open top for easy drum removal, – Removable dryer air duct (no tools required), – Stainless Steel disc type oil skimmer, – Thermostat controlled tank heat, – Independent air heat temperature controller, – 50 gallon wash tank, – 7.5 kw ...more
Buehler #10-1030, Chop Saw, 16" x 8" Door Opening, 5" clearance from left & right side of blade
Category: Cutoff Saws
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Buehler
Model: 10-1030
16 x 8 door opening 5″ clearance from left side of blade 5″ clearance from right side of blade 4″ clearance under blade before chop.
19" x 49.5" LeBlond #Regal, Engine Lathe, 106" L x 14.5" width Bed, 12.5" diameter Chuck, 11" swing over cross slide, 400 V
Category: Engine Lathes
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Leblond
Model: REGAL
106″ length of bed, 49.5″ dist between centers, 19″ swing over bed, 11″ swing over cross slide, 12.5″ dia chuck, 14.5″ bed width, 400v 3ph.
Hardinge #HC, Chucking Machine Lathe w/CT-A Threading Attachment, 2.189" Spindle Nose diameter, 9" Fixture diameter, 125-3000 RPM Spindle, 1.5 HP, 220 V
Category: Engine Lathes
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hardinge
Model: HC
Hardinge HC Chucking Machine Lathe with Automatic Production Threading Unit HC Model CT-A attachment. Model Number: HC HP: 1.5 Volts: 220 Phase: 3 Cycle: 60 Control Voltage: 110 Wiring Diagram: CHG8220 Spindle Nose Diameter: 2.189″ Spindle Nose Thread: 2-3/16″ -10 RH Max Fixture Diameter: 9″ Max ...more
Adjustable Bowl Stand, 52" tall, 12" adjustment, for 20" Bowls
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: ADJUSTABLE BOWL STAND
appears to have 12" of adjustment For 20" bowls Top plate has 5" of offset adjustment (forward backwards).
Bowl Stand, 55" x 60" x 53" tall
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: BOWL STAND
55" x 60" x 53" tall stand.
Bowl Stand, 44" x 44" x 55" tall
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: BOWL STAND
44 x 44 x 55 tall.
Bowl Stand, 46" x 46" x 55.5" tall
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: BOWL STAND
46 x 46 x 55 ½ tall.
Bowl Stand w/Enclosure, 46" x 46" x 54.5" tall
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: BOWL STAND W/ENCLOSURE
46 x 46 x 54 ½ tall w/enclosure.
Sound Enclosure, 48.5" x 30" x 48.5"
Category: Feeders, Parts
Seller: Machinery Exchange International
Location: Posen, IL
Model: SOUND ENCLOSURE
48 ½ x 30 x 48 ½.
Tennant #7400, Floor Scrubber, LP Gas powered, 70000 sq.ft./hr., 57" width Path, 79" turning radius
Category: Floor Scrubbers and Sweepers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Tennant
Model: 7400
The rugged Model 7400 is the machine of choice for tough, abusive environments. Two cylindrical brushes aggressively scrub up to 70,000 sq ft per hour (6503 m2 per hour) with a wide, 57 inch (1450 mm) path. A high-speed vacuum fan recovers the solution leaving the surface almost completely dry. s Easy maintenance: ...more
Warren #WS-1000, Slotter
Category: Head Slotters
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Model: WS-1000
Warren #WS-1000VB, Slotter
Category: Head Slotters
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Model: WS-1000VB
Warren, Slotter, 2005
Category: Head Slotters
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Year: 2005
Warren, Slotter, 2004
Category: Head Slotters
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Year: 2004
Warren, Loader, 135" overall height, 46" x 36" x 24" deep Hopper, 17" width x 2.5" H Chute, 75" exit height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Overall height 135″ to tip Base footprint 57 x 55 75″ exit height 17″ chute opening width 2.5″ chute opening height 46″ x 36″ x 24″ deep hopper dims Gate opening 12.5″ wide 0-12″ height adjustable Rodix feeder cube.
Warren #2, Loader, 135" overall height, 46" x 36" x 24" deep Hopper, 17" width x 2.5" H Chute, 75" exit height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Overall height 135″ to tip Base footprint 57 x 55 75″ exit height 17″ chute opening width 2.5″ chute opening height 46″ x 36″ x 24″ deep hopper dims Gate opening 12.5″ wide 0-12″ height adjustable Rodix feeder cube.
Gravity Loader, 14" width Track, 11" Floor to Bottom of Chute, (7) 9"-70.5" Stands
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Track Width – 14″ Floor to Bottom of Chute – 11″ This loader will come with choice of 4 post stand under unit at a first come first serve basis. Add floor to bottom of chute height to the stand height below to get a real discharge height. 1 – 70.5″ Stand 2 – 10.0″ Stand ...more
Overhead Hopper, 36" x 36" x 49" deep, 10" width Chute, 80" overall height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Overall height 80" tall floor to top Chute width 10".
Gravity Loader, 8" width Track, 16" Floor to Bottom of Chute
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Track Width – 8″ Floor to Bottom of Chute – 16″ Thank you for viewing.
Manual Parts Hopper, 43.5" x 38" x 55.5" H overall dimension, 23" x 38" x 6" Hopper Area
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Overall Dims: 43 ½ x 38 x 55 ½ Hopper Area: 23 x 38 x 6.
Gravity Loader, 8" width Track, 16.5" Floor to Bottom of Chute
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Track Width – 8″ Floor to Bottom of Chute – 16.5″ Thank you for viewing.
Overhead Parts Hopper, 8" width x 70" H Exit Chute, 31" bracket width
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Exit chute width 8″, Bracket width at top in hopper 31″.
Overhead Parts Hopper, 79" exit height, 27" Chute overhang
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Chute overhang 27″ from base outward.
Belwinco, Parts Loader Hopper, 76" x 36" Hopper, 66" Hopper exit height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Hopper chute exit 66″, Hopper dims 76 x 36″ wide.
Blue Manual Parts Hopper, 36" entry height, 24" exit height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Entry height 36″, Exit height 24″.
Overhead Hopper, 36" x 36" x 47" deep, 10" width Chute, 60" overall height
Category: Hoppers
Seller: Machinery Exchange International
Location: Posen, IL
Overall height 60" tall floor to top Chute width 10".
Sunnen #MBB-1650, Power Stroking Hone, 0.06"-5.5" ID Range, 16" length, 16 gallon Reservoir, (12) 200-1600 RPM Spindle, 80-310 SPM, 1/2 HP
Category: Horizontal Hones
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Sunnen
Model: MBB-1650
I.D. Range: 0.060″ to 5.5″ Length Range: 16″ Spindle Speeds (12): 200 – 1,600 RPM Stroke Length: 80, 110, 169, 220, 310 SPM Horsepower: 1/2 H.P. Honing Fluid Reservoir: 16 Gallons Weight: 1,200 Lbs. Dimensions (W x D x H): 50″ x 54″ x62″.
Sunnen #MBB-1690, Power Hone, 0.06"-6.5" diameter Range, 16" length, (12) Spindle Speeds, 1/2 HP, 240 V
Category: Horizontal Hones
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Sunnen
Model: MBB-1690
Sunnen Hone Model MBB-1690 Power Stroke 0.060″ to 6.500″ diameter capacity; Hones bores up to 16″ in length; 12 spindle speeds. Spindle motor and Stroker motor: 1/2 hp, 3 phase, (wired for 240v). Approximate weight: 1,000 lbs. Accessories included: Assorted mandrels, stones, and accessories.
Sunnen #MBB-1690, Power Hone, 0.06"-6.5" ID Range, 0"-16" length, (12) 20-1600 RPM Spindle, 80-310 SPM
Category: Horizontal Hones
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Sunnen
Model: MBB-1690
Diameter Range (manual).060″ to 6.5″ ID Diameter Range (Power).060″ to 3.75″ ID Honed length range (manual) 0-16″ Honed length range (Power).250″ to 6″ Spindle Speeds (12) 20-1600 rpm Stroking Speeds 80,110,160,220,310 spm Machine dimensions 55″ x 41″ x 65″H ...more
Sunnen #MBB-1800, Power Hone, 0.125"-3.75" Honing capacity, 1/4"-6" Stroke length, (12) 200-2500 RPM Spindle, 80-310 SPM, 1 HP
Category: Horizontal Hones
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Sunnen
Model: MBB-1800
Honing Capacity.125″ to 3.750″ Stroking Rates 80,110,160,220,310 spm Stroke Length, Adjustable 1/4″ – 6″ Spindle Speeds (12) 200-2500 rpm Honing Oil Capacity 25 gal Spindle Motor 1HP, 1745 rpm Power Stroke Motor 1/2 hp Machine weight 1100 lbs.
General Inspection #GI-100, Vision Sorting Machine, 600 PPM, 3 camera, 40mm diameter x 150 L parts max
Category: Inspection Equipment
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: General Inspection
Model: GI-100
Gi incorporates hole inspection optics to specifically image and measure both the bottom of a hole and its vertical walls. This allows great of I.D. walls and the detection of very small defects like; chips, voids, cracks or other surface imperfections., Part Diameter Range: 2mm – 40mm, Part Length Range: 10mm ...more
Mectron #MI-8500, Digital Eddy Current Inspection and Sorting System, checking hardness only, no lasers, 110-220 V
Category: Inspection Equipment
Seller: Machinery Exchange International
Location: Posen, IL
Model: MI-8500
No Lasers, Checking hardness only, 110V-220V AC, Automatic gating, Alarm beacon.
Jagura #JAG-KG-AL, Blade Sharpener/Grinder, 300 mm Travel, 0-4 MPM Table Speed, 12000 RPM Spindle, 1/2 HP
Category: Knife Grinders
Seller: Machinery Exchange International
Location: Posen, IL
Model: JAG-KG-AL
JAG.KG.AAL 930913L5 2004 Model JAG-KG-AL max. travel front to back 300mm left to right 300mm Cross feeding graduation 0.005mm Table speed 0-4m/min Roller speed 0-380 rpm Swivel angle ±45° Feeding method front to back manual left to right automatic Spindle speed 0-12000 rpm Main Motor Roller ...more
11" wide, Loading Parts Conveyor, magnetic, 23" L entry at bottom, 100" exit height
Category: Magnetic Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
100″ exit loading conveyor Magnetic 11.5″ track width 23″ long entry at bottom.
16" wide, Storch #6218-10, Magnetic Parts Conveyor, 143" Tall, 127" Exit bottom to ground
Category: Magnetic Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Model: 6218-10
143″ tall 127″ exit bottom to ground 16.25″ wide track.
Material Handling Equipment
1 Result
Tub Stand, 70" tall, 36" x 40" Top Plat dimension
Category: Material Handling Equipment
Seller: Machinery Exchange International
Location: Posen, IL
70" from floor to top platform 36" x 40" top plat dims.
Miscellaneous Packaging Equipment
1 Result
Packing Line Box Shaker, 8"-13" box width
Category: Miscellaneous Packaging Equipment
Seller: Machinery Exchange International
Location: Posen, IL
Model: PACKING LINE BOX SHAKER
8″ min box width, 13″ max box width.
4 Spindle Allen-Bradley, Drill Press, 56" L x 21" width Table, 7"-12" Chuck, 2 HP, 220/480 V
Category: Multi Spindle Drill Presses
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Allen
TABLE LENGTH/WIDTH 56†x 21†Chuck Distance 7â€-12†to table Variable speed for each head 220-480v 2hp motors for each head Model A012?.
5/16" National, 4-Die CNF Nut Former, 125 PPM, 9/16" max Feed, 3/4" max Kickout
Category: Nut Formers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
9/16″ max nut across flats, 9/16″ max feed, 3/4″ max kickout, 125 ppm, Re-manufactured by FMT in 1997.
1/4" -1/2" Nutap #MAS14, Nut Tapper
Category: Nut Tappers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nutap
Model: MAS14
M6 – M14 1/4″ to 1/2″.
5/16" Dah Lian, Nut Tapper, 4 Spindle, NEMA, 480 V.
Category: Nut Tappers
Seller: Machinery Exchange International
Location: Posen, IL
Capacity #8-5/16 M5-M8, Production Rate (MAX) 400-200, Motor (HP) 1HP-2, Lubricant (L) 300, TAP (mm) M185 x 25R, Net weight (kgs) 700, Machine Dimension (cm) 128 x 153 x 160, Setup for 1/4 parts, should run up to 5/16”, 480v 60hz, Nema 4,12 Enclosure Safety Interlocks, 4 new drive motors installed, Good Condition.
1/2" Nutap #GA-12, Bent Shank Nut Tapper, 1-Spindle, 25 mm Part diameter
Category: Nut Tappers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nutap
Model: GA-12
MAXIMUM THREAD DIAMETER M-12 (1/2″), MAXIMUM PART DIAMETER 25MM, MAXIMUM PART LENGTH DEPENDING ON PRODUCT – THREAD.
2.25" National, Nut Tapper, 10-Spindle
Category: Nut Tappers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
For Nuts 2-1/4″.
Oil Recovery Systems
6 Results
Nederman #OMF-1000, 2 stage Oil Mist Collector, 2 x 7.9" inlets, 589 cfm, 104°F internal fan, 1.5 HP, 460 V., w/ 1 optional filter element
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nederman
Model: OMF-1000
The Nederman OMF (Oil Mist Filter) is designed to handle large amounts of oil mist during continuous operation. They are engineered for high efficiency filtration coupled with lower maintenance costs., Nederman OMF 1000-2 has as standard 2 filter-stages where the first stage consists of filter cassettes with ...more
Mayhew Industries #115, Oil Filtration Unit
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Model: 115
Oil Filtration Unit New filters included.
Mayhew Industries #116, Oil Filtration Unit
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Model: 116
Oil Filtration Unit New filters included.
Mayhew Industries #117, Oil Filtration Unit
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Model: 117
Oil Filtration Unit New filters included.
Mayhew Industries #118, Oil Filtration Unit
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Model: 118
Oil Filtration Unit New filters included.
Sanborn, Oil Filtration Unit
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Cousins, Pallet Wrapper
Category: Pallet Wrappers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Cousins
Adjustable variable table speed, Up/down movement, Adjustable wrap tension, 5-6′ max height, Capacity around 4,000lbs~.
Plain Cylindrical Grinders
2 Results
8" x 12" Toyoda, outside dimension Grinder, 8"-12" outside dimension x 2" width x 5" Bore Grinding Wheel, 3 HP, 100-500 RPM, Rebuilt
Category: Plain Cylindrical Grinders
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Toyoda
Swing over Table 8″, Distance Between Centers 12″, Workhead Swivel +/- 90 Degrees, Grinding Wheel Size 8″ to 12″ OD x 2″ Wide 5″ Bore, Grinding Wheel Speed 2-Ranges 2085 to 3370 RPM, Grinding Wheel Swivel +/- 15 Degrees, Workhead Speed 100, 170, 290 & 500 RPM, Grinding Wheel ...more
Myford, Full Auto Cycle outside dimension Grinder
Category: Plain Cylindrical Grinders
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Myford
Progressive Headers
5 Results
.24" x 2.2" Asahi Okuma #RH-60, 2 Die 3 Blow Header, 200 PPM, PKO, 1988
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: RH-60
Year: 1988
Wire Diameter: M6, Max Cut Off Length: 55 mm, Min Cut Off Length: 6 mm, Max K.O. Length: 55 mm (1st Die and 2nd Die), 2nd PKO K.O. Length: 18 mm, 3rd PKO K.O. Length: 12 mm, Main Motor: 10 HP, PPM: 100 – 200 pcs/min, Heading Tonnage: 30 Metric Tons, Relieving K.O. Stroke: 2MM, Year: 1988, Voltage: 220V 60HZ 3PH ...more
.35" x 2.9" National Formax #FX-22M, 2 Die 2 Blow Header, 400 SPM
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Formax
Model: FX-22M
SIZE: 8.9mm x 74mm, PPM: 400, MANUFACTURED: 1994, DIMENSIONS: 4.3m x 1.9m x 2.2m, INCLUDED:, 1) Conveyor, 2) Wire Straightener, 3) Operator Stand, 4) Oil Separator, 5) Transformer, 6) Complete Sound Enclosure.
.51" x 3.94" Asahi Sunac #AT-1210, 2D2B Header, w/ conveyor, die block, 1994
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Asahi
Model: AT-1210
Year: 1994
Max cutoff diameter, 13 mm or.512 in, Max kickout, 100 mm or 3.937 in, Year, 1994, S/N, 4-011, Comes with, Operator Stand, Conveyor, New die block, In good running condition.
.55" x 3.9" Asahi Okuma #ORH-120, 2D3B Header, 100 PPM, overhaul 2007, orig 1990
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: ORH-120
Overhauled 11/2007, 14mm cutoff dia, 100mm cutoff length, 1st die ko – 130mm, 2nd die ko 90mm, punch kickout length 17mm, relieving stroke 3mm, 100 ppm.
.87" x 2.76" Jern Yao #JNP19B5S, Parts Former, 6.93" stroke, 185 ton, 50 HP, 160 PPM
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Jern Yao
Model: JNP19B5S
CUT-OFF DIA. MAX. (mm) 22, CUT-OFF LENGTH MAX. (mm) 11~70, KICK-OUT LENGTH MAX. (mm) 100 (50), P.K.O. LENGTH MAX. (mm) 20, CUT-OFF QUILL (DxL) (mm) 70×75, MAIN DIE HOLE (DxL) (mm) 90×140, DIES PITCH (mm) 111, PUNCH HOLE (DxL) (mm) 65×130, RAM STROKE (mm) 176, FORGING POWER (ton) 185, OPEN UPSET DIA. ...more
Steeltree #Series-25, Bar Rack
Category: Racks and Shelving
Seller: Machinery Exchange International
Location: Posen, IL
Model: STEELTREE #SERIES-25
Ram (Die Sinker) EDM
2 Results
Elox #8-2012, Sinker Electrical Discharge Machine Machine, 8" Stroke, 9" x 9" Plate, 9"-17" Open height, 17.25" Throat Clearance, 20" x 12" Worktable, 280 V
Category: Ram (Die Sinker) EDM
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Elox
Model: 8-2012
*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ ...more
Elox #8-2012-DR, Sinker Electrical Discharge Machine Machine, 8" Stroke, 9" x 9" Plate, 9"-17" Open height, 17.25" Throat Clearance, 20" x 12" Worktable, 280 V
Category: Ram (Die Sinker) EDM
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Elox
Model: 8-2012-DR
*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Movement – 12.25″ x ...more
Reciprocating Surface Grinders - Horizontal Spindle
6 Results
6" x 12" Boyar-Schultz #HY-6220, Hydraulic Surface Grinder
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Boyar-Schultz
Model: HY-6220
6×12 table removed during transport but comes with machine.
8" x 20" Okamoto #820A, Surface Grinder, 8" x 1" wheel, 25.59" Table Travel, 19 IPM Spindle, 1-83 RPM, 2 HP
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okamoto
Model: 820A
Table Size 8″ x 20″ Longitudinal Table Travel 25.59″ Max. Table Load 440 Lbs. Cross Saddle Travel 9″ Max. Distance Under Wheel 15.6″ Table Speed 1-83 RPM Cross Saddle Feeds (Intermittent) 0.02″-0.8″ Continuous Cross Saddle Feed 4-40 IPM Automatic Spindle Downfeed Rate ...more
10" x 30" Brown & Sharpe, Surface Grinder, 14" x 1.5" x 5" Wheel, 10-125 FPM, 5 HP, 1800 RPM
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Brown & Sharpe
WORKTABLE SIZE………………………… 10″ X 30″ GRINDS WORK TO HEIGHT OF………… 18″ (W/14″ WHEEL) WHEEL SIZES…………………… 14″ X 1- 1/2″ X 5″ ...more
12" x 14" Gallmeyer & Livingston Co., Surface Grinder, 12" wheel
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Gallmeyer & Livingston
12 x 14″ Capacity 12″ Grinding Wheel Weight: 8960 lbs.
12" x 24" Okamoto #Accugar-124N, Surface Grinder, 12" outside dimension x 1.5" width x 5" ID wheel, 29.5" x 13.6" Table Travel, 1-100 FPM, 1800 RPM Spindle
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okamoto
Model: ACCUGAR-124N
Magnetic Chuck Surface: 12″ x 24″ Distance Under 12″ Grinding Wheel to Table Top: 13.7″ Table Travel: 29.5″ (Longitudinal) 13.6″ (Cross) Pad Size: 30″ x 11.8″ Table Longitudinal Feeds: 1 – 100 FPM (Hydraulic) 1.85″ (Hand) Table Cross Movement:.2″ ...more
K.O Lee Co. #S714, Surface Grinder
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Lee
Model: S714
Model S714.
3/16" National, Tubular Rivet Header, 225 PPM, 1" Shank length, 3/8" Hole depth
Category: Rivet Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
MAXIMUM SHANK LENGTH 1″ (25mm), MAXIMUM DIAMETER 3/16″, HOLE DEPTH 3/8″ (10mm), SPEED 225 PPM, cracked oil can (on side of machine) (nothing major).
Rotary Table Surface Grinders - Vertical Spindle
2 Results
Blanchard #11, Rotary Grinder, 11" Grinding Wheel, 16" Table
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Blanchard
Model: 11
11″ Grinding Wheel, 16″ Table, Chuck has ring installed on OD. Brass table has about.342″ thickness left (almost new condition).
GMN #MPS2-R300, Rotary Grinder, 300 mm diameter Table, 175 x 100 x 76 mm Grinding Wheel, 2850 RPM Spindle, 2.2 kW, 1984
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Gmn
Model: MPS2-R300
Year: 1984
Motor 2,2 kW, Spindle speed 2850 rpm, Power connection 3,2 kVA, Rotary table Diameter 300 mm, Rotary table speed 0-30 rpm, Axial run-out <2 um, Grinding wheel Ceramic 175x100x76 mm, CBN/Diamond 175x40x76 mm, Grinding height above rotary table, Ceramic 180 mm, CBN/Diamond 240 mm, Grinding height above magnet ...more
Accuvision #ACV1605, Sorting Machine, Specialty Steel Dial, Sorts Nuts/Bolts/Rivets/Screws, M3-M20
Category: Sorting Lines
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Accuvision
Model: ACV1605
ACV1605, Specialty Steel Dial, Can Sort For: Nuts, Bolts, Rivets, Screws, M3~M20, Currently setup to run 3mm x 8mm long screw.
Accuvision #ACV1605, Sorting Machine, Small Dial, updated programming 2019, orig 2014
Category: Sorting Lines
Seller: Machinery Exchange International
Location: Posen, IL
Model: ACV1605
Accuvision Sorting Machine ACV-1605 (Small Dial) Can Sort For: Nuts, Bolts, Rivets, Screws Packaging Conveyor Windows OS All Programing Updated 2019 Started Production January 2014 http://www.accuvision.com.tw/en/products-en/acv-1605-screw-inspection-machine.html.
CCM #DS-510, Double Layer Boxing Conveyor, for Sorting Machine, 2016 (2 available)
Category: Sorting Lines
Seller: Machinery Exchange International
Location: Posen, IL
Model: DS-510
This listing is for one used double layer conveyor for automatic box changing., Typically used in conjunction with 1/4 keg boxes, but supports various sizes., Compatible with most CCM sorting machines, Fully tested and operational – inspected by Truform Equipment, 220v 60hz, New machines, service, installation ...more
Manual Bowl Sorter, (6) Chutes, (5) adjustable Doors, 21" counter clock wise Feeder Bowl
Category: Sorting Lines
Seller: Machinery Exchange International
Location: Posen, IL
6 chutes 5 adjustable doors for part length 21″ ccw feeder bowl Tested functional Works Overhead hopper Automatic Feed switch.
Squirrel Cage AC Electric Motor
1 Result
15 HP 1750 RPM Electro Adda, Motor, Type C160M, 4.5" L Shaft, 1.625" dia., 220-380 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Electro Adda
4.5" long shaft 1-5/8" diameter.
Steel Slat and Chip Conveyors
9 Results
4.25" x 6.8" Unloading Parts Conveyor, 10" loading height, 48"/28" discharge height, 45 deg. Incline, 240 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
48″ exit from belt 28″ exit with hopper on Discharge Height: 48″ or 28″ Loading Height: 10″ Belt Width: 4.25″ Belt Divider Height: 5/8″ Belt Length: 80″ Incline (approx): 45deg Overall Footprint (LxWxH): 80″ x 22″ x 72″ Voltage 240v.
5.25" Mayfran, Parts Conveyor, 27" entry height, 52" exit height, 1.25" belt driver height, 240/480 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Mayfran
5 1/4″ belt width, 1 1/4″ belt divider height, 240 or 480 voltage motor, Entry height 27″ from floor to top of guarding or 10″ without guarding.
6" x 7.5" Hytrol, Unloading Parts Conveyor, 9" loading height, 55" discharge height, 45 deg. Incline, 480 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hytrol
Discharge Height: 55″ Loading Height: 9″ Belt Width: 6″ Belt Divider Height: 1.5″ Belt Length: 89″ Incline (approx): 45deg Overall Footprint (LxWxH): 67″ x 36″ x 69″ Voltage 480v are for reference only pulled from an identical conveyor. Will need to verify measurements ...more
6" wide, Angor #AMH-HD, Parts Conveyor, 12" entry height, 1" belt divider height, 110 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Angor
Model: AMH-HD
6″ belt width, 1″ belt divider height, 110 voltage, Entry height 12″ from floor to top of guarding.
6" wide, Goessling, Parts Conveyor, 9.5" entry height, 52" exit height, 1" belt divider height
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Goessling
6″ belt width, 1″ belt divider height, Entry height 9.5″ from floor to top of guarding.
6" wide, Parts Conveyor, 10" entry height, 42" exit height, 1/4" H belt divider
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
6″ belt width, 1/4″ belt divider height, Entry height 10″ from floor to top of guarding.
8" x 8.2" Unloading Parts Conveyor, 12" loading height, 60" discharge height, 45 deg. Incline, 240 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Discharge Height: 60" Loading Height: 12" Belt Width: 8" Belt Divider Height: 1" Belt Length: 98" Incline (approx): 45deg Overall Footprint (LxWxH): 80" x 22" x 72" Voltage 240v.
11.5" wide x 11.39" long, Unloading Parts Conveyor, 34" loading height, 52"/36" discharge height, 20 deg. Incline, 110 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Discharge Height: 52" or 36" Loading Height: 34" Belt Width: 11.5" Belt Divider Height: 1.5" Belt Length: 136" Incline (approx): 20deg Overall Footprint (LxWxH): 163" x 38" x 64" Voltage 110v.
21" x 11.8" Angor #AMH-150, Unloading Parts Conveyor, 21" loading height, 52"/32" discharge height, 30 deg. Inlcine, 110 V
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Angor
Model: AMH-150
Discharge Height: 52" or 32" Loading Height: 21" Belt Width: 4.25" Belt Divider Height: 1" Belt Length: 140" Incline (approx): 30deg Overall Footprint (LxWxH): 151" x 23" x 71" Voltage 110v.
40000 lb. Louis Small #UT40TA10, Tensile Tester
Category: Tensile Testers
Seller: Machinery Exchange International
Location: Posen, IL
Model: UT40TA10
Model: UT40TA10, Capacity: 40,000 lbs, Very Good Condition.
3/32" x 1.125" Warren #WT-500, High Speed Thread Roller, 150-1100 PPM, 1.25" Blank length, 2 HP
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Warren
Model: WT-500
Blank Length: Up To 1-1/4″, Maximum Thread Die Length: 1-1/8″, Production Rate: 150 – 1100 PPM, Motor: 2 HP, Dies 00 and 000 Vibratory Bowl.
.19" x 2.5" Hartford #0-500, Thread Roller, 250-500 PPM, 3" L Shank
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hartford
Model: 0-500
SCREW DIAMETER CAPACITY #2 (.086″) THRU #10 (.190″), THREAD LENGTH TO 2-1/2″, MAXIMUM SHANK LENGTH 3″, PRODUCTION RATE 250 – 500 PPM.
.25" x 1.5" Sacma #0, Special Thread Roller, 400 PPM, 3" Blank length
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Sacma
1/4″ Maximum Thread Diameter, 1 1/2″ Maximum Thread Length, 3″ Maximum Blank Length, 400 Pieces per Minute.
.25" x 2" Waterbury-Farrel #10, Thread Roller, 150 PPM, 2" L Shank
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Waterbury-Farrel
Model: 10
1/4″ Thread Diameter, 2″ Thread and Shank Length, 150 Pieces per Minute, AC Motor and Controls.
5/16" x 3" EW Menn #GW-63, High-Speed Thread Roller, 3-1/8" shank, 250-480 pieces/min.
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Ew Menn
Model: GW-63
Thread Diameter 9/64″-5/16, Shank Length 3 1/8″, Thread Length 3″, Pieces per Minute 250-480, Uses #10 Dies.
5/16" x 3" Hartford #10-300, thread roller, w/LorBern Starting System, 300 PPM, 4" blank
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hartford
Model: 10-300
#6 – 5/16″ Diameters, 1/8″ – 3″ Thread Length, 4″ Max Blank Length, 300 PPM, 480v.
3/8" x 1.25" Hartford #10-400, Thread Roller, 400 PPM, 4" L Shank, 3.125" Die Pocket depth, #10 Flat Die, 15 HP
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hartford
Model: 10-400
Diameters –.138″ (#6) TO 3/8″, Thread Length – 1-1/4″, Shank Length – 4″, 400 PPM, 15 HP Motor, 480V.
3/8" x 1.57" Sanmei #THI-10FR, Thread Roller, w/ SBT Stud Feeding Unit, 2.95" blank, 200 PPM, 2019 (2 available)
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-10FR
Max Diameter – M10, Max Thread Length – 40mm, Max Rollable UHL – 75mm, Speed – 100-200 PPM, Inverter, Die Dimensions, 135/150 x 40W x 40H mm, 136/180 x 38/40 x 75H mm, Stroke 340mm, Starter style – circular cam, Pitch alignment – turnbuckle equipped, Vibratory Feeder – 500mm ...more
3/8" x 1.57" Sanmei #THI-10R, Thread Roller, w/ Mule Unit, #20 Flat Die, 2.95" blank
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-10R
M10 max thread size, 75mm max length of parts, 40mm max length of threads, 35mm max length of collar under head, PPM 100-200, 340mm stroke, 32 liters of coolant, 7.5kW power, carbide lined ram slides, Includes new vibratory bowl, Runup / Fault Detection Counter System, Mule Rapid Setup Retrofit Kit – makes setup ...more
.39" x 3.15" Bearkat #KI-30, Planetary Die Thread Roller, 127 mm ID Rotary Die, 240 mm outside dimension Segment, 240 V
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: KI-30
Equivalent to Sakamura SSR-30, 4-10mm Diameter, 80mm Length, Die, Rotary die ID (d) 127, Segment OD (D) 240, Segment Angle 120, # of Seg. 3, Keyway 1/2″/13, Power, 240v.
.47" x 5.91" Sanmei #THI-12R, Incline Thread Roller, 50-150 PPM, 18000 kgf Pressure, 15 kW
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-12R
Max Thread Diameter M12, Max Length 150mm, Pressure 18,000 kgf, Power 4P 15kW, Speed 50-150ppm, Weight 3.5 metric tons, Coolant Tank 30l.
1/2" x 1.97" Sanmei #THI-12AL, Horiz Thread Roller, 4.7" blank, 50 PPM, 2012
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-12AL
Year: 2012
Nominal Diameter M6 – M12, Length Under Head 120mm, Thread Section 50mm, Thread Pressure 17,000kg, Output 4P 11kW, Speeds 15-50 ppm, Weight 6 mtons, Coolant 70 liters, Std. Stroke 730mm, Capabilities:, Thread Rolling, Grooving, Flanging, Sphere Forming, Knurling, Excellent Condition, Lightly Used.
.5" x 2.95" Saspi #GV3-20, Thread Roller, 85-220 PPM, 100 mm Blank length, 80 mm height under head, 14" Die Stroke, 13 kW
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Saspi
Model: GV3-20
Min/Max Thread Diameter: 5-12mm, Max Thread Length: 75mm, Max Length Blank: 100mm, Max Height under Head: 80mm, Speed: 85-110-170-220 ppm, Motor: 13kW DC & Controls, Die Stroke: 14″ (approx), Moveable Die Pocket: 6-3/4″L x 3-1/8″H x 1″DP, Stationary Die Pocket: 6-1/8″L x 3-1/8″H ...more
.5" x 3" Waterbury-Farrel #30, Incline Pick & Place Heavy Frame Thread Roller, 100 PPM, 8" L Shank, 3.125" depth of Die Face, 480 V
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Waterbury-Farrel
Model: 30
Maximum Thread Diameter 1/2″, Maximum Thread Length 3″, Maximum Shank Length 8″, Maximum Depth of Die Face 3-1/8″, Maximum Production 100 PPM, Electrics 480V / 60 Hz / 3 Phase Approx..
.5" x 4" Waterbury-Farrel #30, Incline Thread Roller, 60 SPM, 15 HP
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Waterbury-Farrel
Model: 30
1/2″ Maximum Thread Diameter, 4″ Thread Length, 60 SPM, Coolant Pump, Automatic Lube, 15 HP Motor.
.5" x 4" Waterbury-Farrel #30, Incline Pick & Place Thread Roller, 60 SPM, 15 HP
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Waterbury-Farrel
Model: 30
1/2″ Maximum Thread Diameter, 4″ Thread Length, 60 SPM, Coolant Pump, Automatic Lube, 15 HP Motor.
.5" x 5.12" Saspi #GV-3-30, Thread Roller, 50-200 PPM, 9" x 1.5" x 4" H Moving & 7.5" x 1.375" x 4" H Stationary Dies
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Saspi
Model: GV-3-30
4-12mm diameter, 10-130 length, 50-200 PPM, Waterbury 30 dies Official Die (l x w x h): 210x40x105 190x40x105, Approx measurements:, Moving die 9″ x 1.5″ x 4″ high, Stationary die 7.5″ x 1-3/8″ x 4″ high, Comes with Hopper stand 194, bowl stand 195, Oil tank 196.
5/8" x 6" EW Menn #GW-120, Thread Roller, Incomplete
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Ew Menn
Model: GW-120
See photos for condition, Comes with plug and play electrical panel.
3/4" x 7" Hilgeland #TR-6, Thread Roller, 100 PPM, 1978
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Hilgeland
Model: TR-6
Year: 1978
3/4″ Capacity, 7″ Max Length, 100PPM, 1978.
4" x 2-1/2" Tanisaka-Hartford #10-400, Thread Roller w/Sanmei Sems, 150 PPM
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: 10-400
138″ –.3125″ Min/Max Blank Diameter (3.5 MM TO 8.0 MM), 4.018″ Maximum Shank Length (102 MM), 2-1/2″ Maximum Thread Length (65 MM), 160 – 400 PPM, for THI-SV sems unit, Thread length 25-190mm, Thread dia M8-M18, Washer max OD 40mm, 150 PPM.
M12 Sanmei #THI-12R, Thread Roller, 50-150 PPM, 17.32" stroke, 11 kW, w/ bowl & stand
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-12R
Max Diameter M12, Max Blank Length 120, Max Thread Length 50, Max Length Under Head 70, Max Thread Pressure (KGS) 17000, Power (KW) 11, Speed (PPM) 50-100, Stroke (MM) 440, Coolant (LTR) 65, Currently setup inline to straighten parts going into a THI-875.
1/2" Sanmei #THI-12R-Evolution, thread rollers, 50-150 PPM, 460mm 18" stroke, 2014
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-12R-EVOLUTION
Year: 2014
Max Diameter M12, Max Blank Length 150, Max Thread Length 50, Max Thread Pressure (KGS) 18000, Power (KW) 15, Speed (PPM) 50-150, Stroke (MM) 460mm, Coolant (LTR) 30, Eccentrical pin pitch alignment, Easy ratchet/lever bowl height adjustment, Pneumatic disc brake system, Recirculating continuous lubrication system ...more
Sanmei #THI-R875, Thread Roller, M8, w/ THI-SV Double Sems Unit, 75-230 RPM, 11.42" stroke
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-R875
Available 2027, Max Diameter M8, Max Blank Length 100, Max Thread Length 50, Max Length Under Head 50, Max Thread Pressure (KGS) 5000, Power (KW) 7.5, Speed (PPM) 75-230, Stroke (MM) 290, Coolant (LTR) 40, for THI-SV sems unit, Thread length 25-190mm, Thread dia M8-M18, Washer max OD 40mm, 150 PPM.
Sanmei #THI-R875, Thread Roller, M8, 75-230 RPM, 11.42" stroke
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Model: THI-R875
Max Diameter M8, Max Blank Length 100, Max Thread Length 50, Max Length Under Head 50, Max Thread Pressure (KGS) 5000, Power (KW) 7.5, Speed (PPM) 75-230, Stroke (MM) 290, Coolant (LTR) 40, Currently setup to be fed directly from a THI-12R. Does not have a feeder bowl. Truform Equipment may have bowls in stock if ...more
Uncoilers and Centering Coil Reels
1 Result
2500 lb. Fastener Engineers #PF-2500-08, Uncoiler, 50" ID & 30" outside dimensions Coil, 0.5"-1" diameter @ 90000 psi, 41" L Mandrel, 30 FPM, 2 HP, 575/480 V
Category: Uncoilers and Centering Coil Reels
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Fastener Engineers
Model: PF-2500-08
MODEL: PF-2500-08, COIL WEIGHT: 2,500 lbs. (1136 kg), DIAMETER ROD:, MATERIAL STRENGTH: <90,000 PSI = 0.63″ (16mm) TO 1.125″ (28.58mm), MATERIAL STRENGTH; >90,000 PSI = O.5″ (12.7mm) TO 1.0″ (25.4mm), MATERIAL STRENGTH: >125,000 PSI = 0.5″ (12.7mm) TO 0.75″ (19.05mm), COIL ...more
Universal Cylindrical Grinding Machines
2 Results
10.2" x 15.7" Minakochi #MG-40-26FA, Cyndrical outside dimension Grinder
Seller: Machinery Exchange International
Location: Posen, IL
Model: MG-40-26FA
*: Model MG-40-26FA Max swing over table 260mm Max distance between center 400mm.
12" x 40" Cincinatti, outside dimension Grinder
Seller: Machinery Exchange International
Location: Posen, IL
12 x 40 CINCINNATI OD GRINDER Approx. Machine Dimensions: 151â€l x 72â€D Approx. Machine Height: 65†Appeox. Weight: 10,000 lbs.
Vibratory Bowl Feeders
13 Results
Feeder Bowl, clock wise direction, 19 mm max capacity, 30" base, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolts, Direction: CW, Min 0, Max 19mm, Discharge height: ?, Base 30″.
Vibratory Bowl w/Stand, 36" x 36" Bowl base, 63" exit clockwise feeder bowl
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Bowl base 36 x 36, 63″ exit clockwise feeder bowl.
Vibratory Bowl, clock wise direction, 28 mm max capacity, 30" base, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolts, Direction: CW, Min: 0, Max: 28mm, Discharge height:?, Base: 30″.
Feeder Bowl, counter clock wise direction, 18.45 mm min capacity, 24" base, 22" depth, 18.875" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolts, Direction: ccw, Min: 18.45mm, Discharge height:18 7/8″, Base:24″, Depth 22″.
Feeder Bowl, clock wise direction, 4-25 mm capacity, 18" base, 19" depth, 13.5" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part type: bolts, Direction: cw, Min: 4mm, Max: 25mm, Discharge height: 13.58â€, Base diameter: 18â€, Depth 19″.
Feeder Bowl, clock wise direction, 30" base, 18" discharge height, stud part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: studs, Direction: CCW, Min: 0, Max: ?, Discharge height: 18″, Base: 30″.
Feeder Bowl, clock wise direction, 3.25 mm max capacity, 18" base, 18" depth, 14.5" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolt, Direction: CW, Min: 0, Max: 3.25mm, Discharge height: 14 1/2″, Base: 18″, Depth: 18″.
Feeder Bowl, clock wise direction, 3.25 mm max capacity, 18" base, 18.5" depth, 15.125" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolt, Direction: CW, Min: 0, Max: 3.25mm, Discharge height: 15 1/8″, Base 18″, Depth 18.5″.
Feeder Bowl, counter clock wise direction, 14 mm max capacity, 24" base, 24" depth, 15.75" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolts, Direction: CCW, Min: 0, Max: 14mm, Discharge height: 15.75″, Base: 24″, Depth 24″.
Feeder Bowl, clock wise direction, 12 mm max capacity, 21" base, 23" depth, 16" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: bolts, Direction: CW, MIN: 0 mm, Max: 12 mm, Discharge height: 16″, Base: 21″, Depth 23″.
Vibratory Bowl, 30" base, 11" depth
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
30†x 30†30†Diameter 11†Depth.
Feeder Bowl, clock wise direction, 22 mm max capacity, 21" base, 19" depth, 15.5" discharge height, bolt part type
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part type: bolts, Direction: CCW, Min: 0, Max: 22mm, Discharge height: 15.5″, Base: 21″, Depth 19″.
Feeder Bowl, clock wise direction, 10 mm max capacity, 12" base, 15" depth, 13.75" discharge height, flat parts/washers
Category: Vibratory Bowl Feeders
Seller: Machinery Exchange International
Location: Posen, IL
Part: flat parts/ washers, Direction: CW, No Min, Max: 10mm, Base 12″, Discharge height: 13 3/4″, Depth: 15″.
Fastener Engineers #DTM-07-24, Wire Drawer, 0.313" Wire diameter, 24" Capstan diameter, 10-80 FPM, 7.5 HP, 460 V
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Fastener Engineers
Model: DTM-07-24
Maximum Wire Diameter: 0.313″, Capstan Diameter: 24″, Horse Power: 7.5hp, 10-80fpm.
RMG #34-0566-75, Wire Drawer, w/pointer, 1/4" Wire diameter, 20" Capstan, 66 FPM, 5 HP, 480 V
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Rmg
Model: 34-0566-75
1/4″ diameter, 20″ capstan, 5hp, 66fpm, 480v 3ph, pointer.
RMG #45-0564-01, Wire Drawer, 1/4" Wire diameter, 20" Capstan, 64 FPM, 5 HP, 460 V
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Rmg
Model: 45-0564-01
Model 45-0564-01, Capstan Size: 20″, Motor: 5HP, Speed: 64 FPM, Voltage: 460v 3p 60hz.
RMG #56, Wire Drawer w/RA Pointer, 0.312" & 0.375" Wire diameter, 24" Capstan diameter
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Rmg
Model: 56
Model: 56, Capstan Diameter: 24″, Maximum Wire Diameter (Alloy):.312″, Maximum Wire Diameter (Mild Steel):.375″, HP: Unknown, Speed Range: Unknown, Voltage: Unknown, No Drive, For Parts.
RMG #56-0222-01, Wire Drawer w/RA Pointer, 0.312" & 0.375" Wire diameter, 24" Capstan diameter, 22 FPM, 2 HP, 480 V
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Rmg
Model: 56-0222-01
Capstan Diameter: 24″, Maximum Wire Diameter (Alloy):.312″, Maximum Wire Diameter (Mild Steel):.375″, HP: 2, Speed Range: 22 FPM, Voltage: 480v 60hz 3ph.
RMG #56-0554-85, Wire Drawer w/RA Pointer, 0.312" & 0.375" Wire diameter, 24" Capstan diameter, 54 FPM, 5 HP, 575 V
Category: Wire Drawers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Rmg
Model: 56-0554-85
Model: 56-0554-85, Capstan Diameter: 24″, Maximum Wire Diameter (Alloy):.312″, Maximum Wire Diameter (Mild Steel):.375″, HP: 5, Speed Range: 54 FPM, Voltage: 575v 60hz 3ph.
National #625-S3, parts former, 5 Die, 5 Blow, 70-100 PPM, 380 V., 3/4" cut off diameter, 25 HP, 1986
Category: Wire Formers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
Model: 625-S3
Year: 1986
Cut off Diameter Mild Steel: 3/4″, Cut off Diameter Alloy Steel: 5/8″, Kick out Length: 3″, Cut off Length: 2 1/2″, Production Rate: 70-100pcs/min, Horse Power: 25, Year: 1986, Power: 380V 50HZ 3PH, Will Require Flat Rack.
Jenzano #7.6-480-135/400-6, Induction Wire Heater, 7.5 kW, 480 V input, 15 kVA, 500 Vrms Output
Category: Wire Heaters
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Jenzano
Model: 7.6-480-135/400-6
Model Number, 7.6-480-135/400-6, Input, 480V +- 10%, 3 phase, 50/60HZ, Output, 135-400KHZ, 7.5KW, 500Vrms, 15KVA.
Turn Table & Wire Stand, 50" diameter Center section, 62" diameter End to End, 8" height from ground
Category: Wire Payoffs
Seller: Machinery Exchange International
Location: Posen, IL
Diameter End to End: 62″, Diameter Center Section: 50″, Height From Ground: 8″.
Turn Table & Wire Stand, 57" diameter Center section, 63" diameter End to End, 26" height from ground, 41" H Center Pole
Category: Wire Payoffs
Seller: Machinery Exchange International
Location: Posen, IL
Diameter End to End: 63″, Diameter Center Section: 57″, Height From Ground: 26″, Center Pole Height: 41″, Center Pole Adjustment for Coil IDs: 18″ – 42″, New Condition.
Wire Turn Table, 63" diameter End to End, 36" floor to top of leg, 31" width Post to Post
Category: Wire Payoffs
Seller: Machinery Exchange International
Location: Posen, IL
63″ od diameter leg end to leg end 36″ floor to top of leg ID 31″ wide vertical post to vertical post (adjustable).
Turn Table & Wire Stand, 42" Center section, 66" diameter End to End, 5" height from ground
Category: Wire Payoffs
Seller: Machinery Exchange International
Location: Posen, IL
Diameter End to End: 66″, Diameter Center Section: 42″, Height From Ground: 5″.
Turn Table & Wire Stand, 50"
Category: Wire Payoffs
Seller: Machinery Exchange International
Location: Posen, IL
