back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Machinery Central

4850 Crittenden Dr. #3D
Louisville, KY 40209
Gold Level Dealer
Surplus Record Dealer Since 2020

About

Machinery Central is conveniently located in Louisville, KY. We hold a large inventory of used machinery, if there is something specific youre looking for dont hesitate to give us a call, it could be coming our next truck and not be on our site yet!

Products & Services

  • Fabricating Machinery
  • Grinders
  • Lathes
  • Lathes, CNC
  • Milling Machinery
  • Saws

Associations & Affiliations

Related AccountsAddressContact
Tooling Emporium LLCLouisville, KYDenis Frankenberger
Used Press Brake DiesLouisville, KYElaine Woodfin
134 listings in 52 categories

75 KVA 480 Delta Primary, 208Y/120 Secondary, General Electric #9T23B3874, dry transformer, 3-phase

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: General Electric
Electric 9T23B3874 3 Phase 75 KVA Dry Transformer, Transformer, Used ElectricModel No. 9T23B38743 Phase75 kVAPri. V. 480, Sec.V. 208/120Nema Class AA Dry TypeEnclosure Type 2Approximately ...more

Bar Feeders and Loaders

1 Result

Grindley #Ecodyne, hydro-dynamic single spindle bar feed, 2.5" diameter, 16' bar length, 2 stands

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Grindley
Model: ECODYNE
2.5" X 16' GRINDLEY "ECODYNE" HYDRODYNAMIC SINGLE-SPINDLE BAR-FEED, SERIAL NO 0310, MODEL ECODYNE, (2) HEAVY DUTY SUPPORT STANDS, (7) GUIDE TUBES, STORAGE RACK, HYDRAULIC ...more

12" width x 32" D x 16" H Cooley #BL-4, electric 2000 Degrees Fahrenheit high temperature batch furnace

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Canton, MI
Mfr: Cooley
Manufacturer: Cooley Electric Mfg., Type: Electric High Temperature Batch Furnace, Model: BL-4, Working Dimensions: 12" wide x 32" deep x 16" high, Power: 440V / 3-Phase / ...more

24" width x 36" D x 18" H Wisconsin #SDB-436-12G, batch temper gas-fired furnace, 1250 Degrees Fahrenheit

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Canton, MI
Mfr: Wisconsin
Manufacturer: Wisconsin, Oven Type: Batch Temper, Gas-Fired Furnace, Model: SDB-436-12G, Serial: 030059103, Max Temp: 1250°F, Workable Dims: 24" wide x 36" deep x 18" ...more

Acer E-Mill #EVS-3VKH, vertical mill, 10" x50" table, 3 HP, 1999

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Acer
Model: EVS-3VKH
Year: 1999
Acer E-mill EVS-3VKH 3 hp Vertical Milling Machine, 3 HP motor with fan cooling system dissipates heat efficiently., Grease fitting for lubricating the bull gear., One piece quill pinion ...more

Bridgeport #Series-I, vertical mill, 9" x42" table, 1 HP step pully head, chrome ways

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1978
BRIDGEPORT Series 1 VERTICAL KNEE MILL, 1HP Step Pully Head, Bridgeport P/F, Chrome Ways, 9" X 42" HANDFEED TABLE, 8-SPINDLE SPEEDS, 80-2720 RPM, SERIES I, Range, Table Travel ...more

Bridgeport #Series-I, vertical mill, 9" x42" table, 2 HP, 3-Axis Anilam Wizard digital read out, power feed

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1969
Bridgeport Series 1 Vertical Mill, Bridgeport X & Y Power Feed, 2 HP Variable Speed 2J Head, 9" x 42" Table, 3 Axis Anilam Wizard DRO, Chrome Ways, Bijur One Shot Lube, SERIES ...more

Bridgeport #Series-I, 2J variable speed head, 9" x42" tbl., 2 HP, 31" X, 12" Y, 16" Z, 7" riser block

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Bridgeport Series I Standard Knee Mill, 1 1/2 HP 2J Variable Speed Head, 9" x 42" Table, 7" Riser Block, New Power Feed, New Forward/Reverse Control Switch, SERIES I, Range ...more

Bridgeport #Series-I, vertical mill, 9" x42" tbl., 2 HP, 31" X, 12" Y, 16" Z, variable speed, Mitutoyo UDR-220 digital read out, chrome ways, Bijur one shot lube

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Bridgeport Series 1 Vertical Knee Mill, 9" x 42" Table, Mitutoyo UDR-220 DRO, Variable Speed, Chrome Ways, Bijur One Shot Lube, SERIES I, Range, Table Travel (X-Axis, end of table ...more

Bridgeport #Series-I, knee mill, 9" x42" table, 2 HP, 31" X, 12" Y, 16" Z, 2J head, PF, R-8, 2-Axis digital read out, 4" riser, 1979

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1979
Bridgeport Series 1 Knee Mill, Variable Speed 2 HP J Head, 9" x 42" Table, Chrome Ways, New X Axis Servo Brand Power Feed, New ToAuto X & Y Digital Read Out, 4" Riser ...more

Bridgeport #Series-I, 9" x42" tbl., 2 HP, variable speed 2J head, 2-Axis digital read out, 31" X, 12" Y, 16" Z, PF, chrome ways, 1979

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1979
Bridgeport Series 1 Knee Mill, Variable Speed 2 HP 2J Head, 9" x 42" Table, Chrome Ways, New X Axis Servo Brand Power Feed, New ToAuto X & Y Digital Read Out, Bijur One Shot ...more

Bridgeport #Series-I, 9" x42" tbl., 2 HP, 2J head, Newall DP700 2-Axis digital read out, Kurt power draw bar

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Bridgeport Series 1 Knee Mill, Rebuild Variable Speed 2 HP 2J Head, 9" x 42" Table, Chrome Ways, New X Axis & Knee Power Feed, Newall DP 700 (2 axis) Digital Read Out, Kurt ...more

Bridgeport #Series-I, 9" x42" table, 2 HP, 2J head, ProtoTrak SMX controller, 3-Axis digital read out, 1988

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1988
Bridgeport Series 1 Vertical Knee Mill, Variable Speed 2 HP 2J Head, 9" x 42" Table, Chrome Ways, Proto Trak SMX CNC Controller new 2017, Servo Power Feed in the Knee, Bijur One ...more

Bridgeport #Series-I, knee mill, 9" x 42" tbl., 2 HP, 31" X, 12" Y, 16" Z, 2J head spindle, power feed, 2-Axis digital read out, 4" rise, 1979

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1979
Bridgeport Series 1 Knee Mill, Variable Speed 2 HP J Head, 9" x 42" Table, Chrome Ways, New X Axis Servo Brand Power Feed, New ToAuto X & Y Digital Read Out, 4" Riser ...more

Bridgeport #Series-I, vertical knee mill, 9" x48" table, 1 HP step pulley head, chrome ways

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Year: 1977
Bridgeport Series 1 Vertical Knee Mill, 1 HP Step Pulley Head, 9" x 42" Table, Chrome Ways, One Shot Lube, 8-SPINDLE SPEEDS, 80-2720 RPM, SERIES I, Range, Table Travel (X-Axis ...more

Bridgeport #Series-I, 9" x48" tbl., 2 HP, 31" X, 12" Y, 16" Z, 2J head, Acu-Rite 2-Axis digital read out, X-Axis power feed

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-I
Bridgeport Series 1 Knee Mill, Rebuilt Variable Speed 2 HP J Head, New Lead Screws and Nuts X & Y, 9" x 48" Table, Chrome Ways, New X Axis Power Feed, Acu-Rite 2 Axis Digital ...more

Clausing Kondia #FV-1, 9" x42" tbl., 3 HP, 36" X, 12" Y, 16" Z, 60-4000 RPM, R-8, Acurite 2-Axis digital read out

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: FV-1
Brand: Clausing Kondia, Model: FV-1, Serial #: T-290, Table Size: 9" x 42", Longitudinal Table Travel: 36", Cross Table Travel: 12", Knee Travel: 16", Spindle Quill ...more

DoAll #FV-4V, heavy duty vertical mill, 12" x52.75" table, 4 HP variable speed, Newall digital read out

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Doall
Model: FV-4V
#FV-4V DOALL HEAVY-DUTY VERTICAL MILL w/DIGITAL READOUT, Serial No. 05412742, Model FV-4V, Series 14562-4, C80 Newall Digital Readouts, 4 HP Spindle Head Motor, NS40 Taper Spindle ...more

Lagun #FT-2, vertical mill, 10" x48" table, 16" Y, 16" Z, 22.44" ram, 2 HP step pulley head, X-Axis PF

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Lagun
Model: FT-2
Lagun FT-2 Vertical Mill, 2 HP Step Pulley Head, 8 High & Low range speeds from 55 to 2940, X Axis PF, 10" x 48" Table, Internal Coolant System, One Shot Lube, Led Light ...more

Lagun #FTV-2, vertical mill, 10" x50" table, 3 HP head, Mitutoyo digital read out, power feed, 8" riser

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Lagun
Model: FTV-2
Lagun FTV-2 Vertical Mill, X Axis Power Feed, Mitutoyo DRO, 8" Riser, Variable Speed, 10" x 50" power feed table, One Shot Lube, Internal Coolant System, 50" x 10" ...more

Republic-Lagun #FTV-2, vertical milling machine w/rblt head, Acurite digital read out, 3 HP, 10" x50" table

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Republic-Lagun
Model: FTV-2
Republic-Lagun Vertical Knee Mill, Rebuilt 3 HP Head, model FTV-2, X axis Power Feed, AcuRite DRO, 50" x 10" T-slotted table, Table size, 55.25" x 10" (1,403 x 254 mm) ...more

Republic-Lagun #FTV-2, vertical milling machine, Newall digital read out, 3 HP, 10" x50" table

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Republic-Lagun
Model: FTV-2
Republic-Lagun Vertical Knee Mill, model FTV-2, X axis Power Feed, Newall DRO, 50" x 10" T-slotted table, 3HP, Table size, 55.25" x 10" (1,403 x 254 mm), T-slots, 3 on ...more

Sharp #HMV, vertical milling machine w/3-Axis Proto-Trak Plus Control, chrome ways, 10" x51" table

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sharp
Model: HMV
ProtoTRAK Plus is a unique, one-of-a-kind, control system which combines the simplicity of manual machining with the contouring capability of CNC controls. The ProtoTRAK has been designed ...more

Wilton, vertical mill w/Servo X-Axis power feed, 9" x49" table, 3 HP, Newall digital read out, power draw bar

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Wilton
Year: 1997
Wilton Vertical Mill, Servo X axis Power Feed, Newall DRO, Align Air Powered Drawbar, 9" x 49" Table, 3 Hp Variable Speed Head, 60-4200 RPM, 230/460 Voltage, Chiba Oil Lube ...more

Carbide, Friction and Cold Saws

2 Results

4.72" Eisele #VMS350PV, semi-auto circular cold saw, 13.75" saw blade diameter, clamping vise, 1995

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Eisele
Model: VMS350PV
Year: 1995
8.VMS350PV EISELE SEMI-AUTOMATIC CIRCULAR COLD SAW, NEW 1995, SERIAL NO. 02008, MODEL VMS350PV, MODEL 4210P0089, CLAMPING VISE, 10' IEM FEED SYSTEM W/REX COMPUTER, 10' OUTFEED ...more

4.75" Clausing Startrite #SC350D, cold saw, 14" blade, manual vise, standard coolant, 5 HP

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: SC350D
Clausing Startrite SC350D Cold Saw, Electricals: 230v. or 460v. - 3ph, Control: 110v., Coolant: Standard, Spindle Speeds (RPM) : 26/52, Max. Blade Size: 14" (350mm), Miter Cutting ...more

Fanuc Robodrill #Alpha-T14iA, 4-Axis CNC drilling & tapping center, Fanuc 16iM, BT-30

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Fanuc
Model: ALPHA-T14IA
ALPHA-T14iA FANUC "ROBODRILL" 4-AXIS CNC VERTICAL, DRILLING & TAPPING CENTER, Serial No 99ZTH777, Model Alpha-T14iA, Fanuc 16-iM CNC Control, 14-Position Automatic Tool ...more

Fanuc Robodrill #Alpha-T14iA, 4-Axis CNC drilling & tapping center, Fanuc 16iM, BT-30

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Fanuc
Model: ALPHA-T14IA
ALPHA-T14iA FANUC "ROBODRILL" 4-AXIS CNC VERTICAL, DRILLING & TAPPING CENTER, Serial No P001TH837, Model Alpha-T14iA, Fanuc 16-iM CNC Control, 14-Position Automatic Tool ...more

CNC Lathes and Turning Centers

3 Results

Clausing Metosa #EL-1745CS, CNC toolroom lathe, 17" swing, 10" chuck, 3-jaw, 45" centers, 16.125" diameter, 45" length, 2-Axis, Fagor 800T,

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: EL-1745CS
17" x 45" Clausing Metosa EL-1745CS CNC Tool Room Lathe, S/n 33129, 17" Swing, 45" Centers, Fagor 2-Axis CNC Control, 10" 3-Jaw Chuck, 7.5 HP Constant Surface Speed ...more

DMG Gildemeister #CTX620X1000, CNC turning center, 31.5" swing, 15" chuck, 3-jaw, 4.7" bar, 40" centers, Siemens 840D, Y-Axis, live tooling, Steady Rest, 2005

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Dmg
Model: CTX620X1000
Year: 2005
CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE MILLING, New 2005, Serial No 80409390300, Model CTX620X1000, Siemens 840D CNC Control, 12(+4) Position VDI 50 Turret ...more

Hyundai Kia #SKT100, CNC turn center, Fanuc Series OiTC, 21.7" swing, 6" chuck, 1.7" bar, 2008

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hyundai Kia
Model: SKT-100
Year: 2008
Hyundai Kia SKT100 CNC Turning Center, 3300 Run hours, New 2008, Fanuc Series Oi-TC Controls, 12 Position Turret, Tailstock, Tri-Mist Collector, Tri-Mist Collector, Excellent Condition.

Messer #PlateMaster-II, 12' x 50' CNC cutting table, jog Control handle, (2) Oxy Fuel Torches, 2015

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Mount Carmel, IL
Mfr: Messer
Model: PLATEMASTER-II
Year: 2015
Messer Plate Master II 150" x 50' CNC Cutting Table, S/N PMR1215-6066, New 2015;, 15' Between Side Rails, (2) Oxy Fuel Torches, 55' of Floor Mounted Side Rail, Jog Control ...more

Techno CNC Systems #4896HD-S Series, CNC router system, Osai Control, 48" X, 96" Y, 11.5" Z, 2017

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: CNC Routers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Techno Cuc Systems
Model: 4896HD-S
Year: 2017
2017 Techno CNC Systems 4896 HD-S Series CNC Router System, 230V, 3-phase, Only 600 Hours, X-Axis Travel = 48.0", Y-Axis Travel = 96.0", Z-Axis Travel = 11.5", Gantry ...more

Bridgeport #EZ-Trak-DX-Series-I, vertical mill, 9" x48" table, 2 HP, Kurt power draw bar, 33.5" X, 12" Y, 14" Z

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: EZ-TRAK-DX-SERIES-I
Year: 1996
Bridgeport Series 1 EZ Trak DX Vertical Mill, 2 HP VS Head, Kurt Power Drawbar, R8 Spindle, Chrome Ways, New 15" Led Screen, New Keypad, New Updated Software w/USB Port, Auto Lube ...more

Clausing #FV-1, 9" x 48" table, 3 HP, 32.5" X, 15" Y, 16.5" Z, variable speed, SWI ProtoTrak Age 2, R-8

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Clausing
Model: FV-1
GREAT CONDITION with ball screws and Prototrack CNC controls., #FV-1 CLAUSING/KONDIA "PROTO-, TRAK" CNC TURRET-TYPE, VERTICAL MILL, Serial No. AA-961, Model FV-1, SWI Proto Trak ...more

Lagun / Republic #FTV-2, CNC vertical mill, 10" x50" tbl., 3 HP, 30" X, 16" Y, 16" Z, Trak Age 2, 1998

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Lagun
Model: FTV-2
Year: 1998
GREAT CONDITION vertical mill with ball screws and Prototrack CNC controls, #FTV-2 LAGUN/REPUBLIC "PROTO-TRAK" CNC VERTICAL MILL, New 1998, Model FTV-2, SWI Trak A.G.E. 2 CNC ...more

Willis #BTM40, bed type mill, 16" x54" tbl., 7.5 HP, 40" X, 20" Y, 27" Z, Anilam 3000M controller, Torque Rite power draw bar, vise

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Willis
Model: BTM40
Year: 2004
Willis BTM40 CNC Bed Type Milling Machine w/Anilam 3000M Controller, Machine includes the following;, 16" x 54" hardened and ground table surface, 40" x 20" x 27" ...more

Coordinate Measuring Machines (CMM)

1 Result

Mitutoyo #B-231, coordinate measuring machine, 24" X, 24" Y, 18" Z, Renishaw touch probe, accessories

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Mitutoyo
Model: B-231
MITUTOYO MODEL B-231CMM with Renishaw Touch Probe and Accessories, Mitutoyo Model B-231 Coordinate Measuring Machine, 24" x 24" x 18" Measure Range, Renishaw PH9A Probe s/n ...more

Disintegrators (Including Tap Disintegrators)

3 Results

Cammann, 15 KVA, 60" arm length, 48" horizontal head travel, 48" vertical travel, 72" under head, power elevation

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Columbia, TN
Mfr: Cammann
EXCELLENT CONDITION-, Variable Power, Power Elevation, 460/3/60 Electrical.

Electro-Arc #2DB, metal disintegrator, 440 V.

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Electro-Arc
Model: 2DB
REMOVES BROKEN TAPS, BOLTS & DRILLS IN MINUTES!, ELECTRO-ARC #2DB METAL DISINTEGRATOR, 440 VOLT, MODEL 2-DB, S/N 13473, Dual/Horizontal Crossarms, ARC*ER Current Monitoring ...more

Electro-Arc #2S, metal disintegrator

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Electro-Arc
Model: 2S
Electro Arc Metal Disintegrator Model 2S, REMOVE BROKEN TAPS, BOLTS & DRILLS IN MINUTES!, ARC*ER Current Monitoring Disintegrator Head, Arc•er Portable Head, Designed to remove ...more

Double Housing and Openside Planers

1 Result

60" x 312" x 24' Rockford, openside hydraulic planer, 30 HP, #50 milling head, rail & side planer heads, pendant Control, 1973

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Mount Carmel, IL
Mfr: Rockford
Year: 1973
60" x 312" Rockford Openside Hydraulic Planer, New 1973, 30HP 50 Taper Milling Head, Rail & Side Planer Heads, Table Size: 60" x 288", Pendant Control.

Brierley #ZB25, drill grinder w/Brook Crompton 1/4 HP 110 V., .060"-1" cap., 6-jaw chuck

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Drill Grinders
Seller: Machinery Central
Location: Louisville, KY
Mfr: Brierley
Model: ZB25
Brierley ZB25 Drill Grinder,.060 to 1 inch Capacity, Brook Crompton 1/4 HP 110 Volt Single Phase, 6 Jaw Chuck, Cabinet Base, Comes with extra Chucks, Original Brierley and Buck Chuck ...more

3000 cfm Aercology #FDVH3000, vertical air flow mist collector, 3 HP, 10" inlet

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Dust Collectors
Seller: Machinery Central
Location: Louisville, KY
Mfr: Aercology
Model: FDVH3000
AERCOLOGY FDVH3000 MIST,DUST and SMOKE COLLECTOR, Vertical Air Flow Mist, Dust and Smoke Collector, Model FDVH3000, ECU17, S/N 34555, Air Flow Pressure Gauge, 3 HP 3000 CFM, 3-Stage Filter ...more

11" x 20" Hardinge #HLV, 1.25" bore, #2MT, 125-3000 RPM, Aloris toolpost, 1961

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hardinge
Model: HLV
Year: 1961
HARDINGE HLV "SUPER PRECISION" LATHE, Model HLV, Aloris Toolpost, Dovetail, Chip Guard, 2 Spindle Guards, 5C Collet Closer, 32- 5C Collets, SPEC SHEET, Max Swing Over Bed: ...more

14" x 40" Cadillac #CM1440, engine lathe, 8-1/4" swing over cross slide, 3-jaw Gator 10" chuck, foot brake

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cadillac
Model: CM1440
14" x 40" Cadillac Engine Lathe Manufacturer:, Cadillac Model Number: CM1440, Serial Number: 059777, Size: 14" x 40", 5C Collet Closer, Foot brake, Coolant pump, Chip ...more

14"/19" x 40" Mazak #Mate, 3-jaw, 1-9/16" hole, D1-5,76-2000 RPM, quick change tool post, 1990

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Mazak
Model: MATE
Year: 1990
14"/19" x 40" MAZAK MATE GAP BED ENGINE LATHE, MODEL: MATE, 3 Jaw Chuck, Quick Change Toolpost, S/N: 66308, NEW:1990's, SWING OVER BEDWAYS. 14", SWING IN REMOVEABLE ...more

15" x 56" South Bend #CL150E, engine lathe, 8" chk, 3-jaw, 2-1/32" hole, D1-6, Steady Rest, taper

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: South Bend
Model: CL150E
15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD, ENGINE LATHE, Serial No. DN15770731N67, Model CL150E, Series "Nordic 15", Taper Attachment, 8" 3-Jaw Chuck ...more

16" x 54" American #Style-C, lathe, 3-jaw 12" chuck, 4 way tool post, inch/metric, tailstock

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: American
Model: STYLE-C
21.5" x 54" AMERICAN "STYLE C 16X54" ENGINE LATHE, Serial No 78718/69, Style C 1654, 12" 3-Jaw Chuck, Hard Ways 4-Way Tool Post, Full-Length Lead-Screw Threading ...more

16" x 60" Bridgeport Romi #16-8, engine lathe, 2.75" hole

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: 16-8
Bridgeport Romi Model 16-8 16" X 60" Engine Lathe, Max Swing Over Ways: 16-1/2", Max Swing Over Cross Slide: 9-5/8", Max Center Distance: 60", Hole Thru Spindle: ...more

16.5" x 102" LeBlond #14, heavy duty engine lathe, 12" chuck, 3-jaw, steady & follow, power rapid traverse

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Leblond
Model: 14
14"/16.5" x 102" LEBLOND "HEAVY-DUTY" ENGINE LATHE, w/TAPER ATTACHMENT & DIGITAL READOUTS, Series "14 HEAVY-DUTY", Collet Chuck w/Collets, Taper ...more

19" x 150" LeBlond Makino #Regal-19, servo-shift engine lathe, 12" chk, 3-jaw, 3-1/16" hole, L-2, Newall DP700 digital read out, 3 Steady Rest

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Leblond
Model: REGAL-19
19" x 150" LEBLOND "REGAL" SERVO-SHIFT ENGINE, LATHE W/TAPER DIGITAL READOUTS INCH/METRIC, Serial No. 12E237, Model 19" Servo-Shift, Taper Attachment, Newall DP700 ...more

20" x 72" LeBlond #20SL, heavy duty engine lathe, 12" swing over cross slide, 12" 3-Jaw chuck

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 20SL
Year: 1972
20SL x 72" LeBlond "The Machine" Heavy Duty Engine Lathe, Swing 20", Between Centers 72", Swing Over Cross Slide 12", Threads: Inch (48) 2-112 TPI, Feeds ...more

20" x 72" LeBlond #Regal, geared head lathe w/taper, 12" swing over cross slide, 4-jaw 15" chuck, coolant pump

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
Swing Over Bed 20", Swing Over Cross Slide 12", Distance Between Centers 72", Spindle Speeds (12) 25 - 1,500 RPM, Spindle Nose L-1, Hole Thru Spindle 2", Threads: Inch ...more

20"/26" x 80" Victor #2080S, precision heavy duty gap bed lathe, 13" swing over cross slide, inch/metric

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Victor
Model: 2080S
20"/26" x 80" Victor 2080S Precision Heavy Duty Gap Bed Lathe, Extra large rigid compound rest and Meehanite casting bed provide excellent stability and consistency during ...more

21"/22.25" x 72" Leblond #F21, engine lathe, digital read out, 14.25" swing over cross slide, 3-jaw 12" chuck

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Leblond
Model: F21
21"/22.25" x 72" LEBLOND "REGAL" ENGINE LATHE w/DIGITAL READOUTS, Serial No 2F637, Model F21, Series "REGAL", Digital Readouts, 12" 3-Jaw Chuck ...more

24" x 84" FAT #TUR-630M, engine lathe, 15" chuck, 6-jaw & 4-jaw, inch/metric, Sony digital read out, Steady & follow rest, tailstock

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Fat
Model: TUR-630M
24" x 84" FAT Tur 630M Engine lathe, 24" Swing, 84" between Centers, 15.31" max on the Slides, 24.8" Max Turning Diameter, 17.04" Width of the bed, Rapid ...more

25" x 120" Daewoo Doosan Ikegai #DA25, hi-speed precison engine lathe, 8" chuck, inch/metric

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Daewoo Doosan
Model: DA25
Year: 1981
25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, ENGINE LATHE W/TAPER ATTACHMENT, Serial No. 040059, Model DA25, Taper Attachment, 2.2" Hole Thru Spindle, Inch-Metric Threading ...more

25" x 216" American #2516 Style E engine lathe w/ taper attachment

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: American
Model: 2516
25" x 216" AMERICAN ENGINE LATHE w/TAPER ATTACHMENT, Serial No 78102/67, Model 2516, Style 20 x 216 E, Taper Attachment, 22" 4-Jaw Chuck w/Jaws, (3) Steady Rests - Tool Post ...more

150 Ton, Whitney #7150AX6, portable hydraulic flange press, 2" stroke, 6.25" throat, hydraulic tank, portable cart

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Whitney
Model: 7150AX6
EXCELLENT CONDITION-, Model 7150AX6 Portable Hydraulic Flange Press, 150 ton capacity. W/Hydraulic Tank, Portable cart, Springs., Model 7150AX6 Portable Hydraulic Flange Press, 150 ton ...more

Flat and Shape Straighteners for Coil Handling

1 Result

12" x .125" Littell #412-7PD, powered straightner, 240/480 V., 7 rolls, 3.125" diameter, fwd/rev. jog loop Control

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Littell
Model: 412-7PD
12" LITTELL POWERED STRAIGHTENER MODEL# 412-7PD, Serial Number 73248-64, 12 inch., Seven roller, 60 Hertz / 3 Phase , Dimensions 6 Ft. x 3 Ft. x 5 Ft., Standard :, Equipment and s: ...more

Gap Frame Single Crank Press Machines

4 Results

25 Ton, Rousselle #3, single point gap frame press, 135 SPM, 2 HP, 1175 RPM

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Rousselle
Model: 3
Rousselle Single Point Gap Frame Press, Model Number: 3, Capacity (Tons) Near B.D.C.: 25 tons, Bed Area (Left-to-Right x Front-to-Back): 20 x 14, Strokes Per Minute: 135, Shut Height ...more

45 Ton, Minster #59S, 3" stroke, 15.75" Shut Height, 2.5" adj., 120 SPM, Allen Bradley Panelview 300 PLC, air clutch & brake, 1994

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Minster
Model: 59S
Year: 1994
45 TON MINSTER FIXED BASE GAP-FRAME PRESS, New 1994, Serial No 59S-FB-28298, Model 59S, Minster Air Clutch & Brake, Dual Palm Buttons w/Allen Bradley Panelview 300, Micro PLC ...more

66 Ton, Komatsu #OBS-60, gap frame, 75-150 SPM, pneumatic wet clutch & brake, 1980

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Komatsu
Model: OBS-60
Year: 1980
EXCELLENT CONDITION-, Komatsu 66 Ton OBS Press, Mdl# OBS60, S/N#10626, New 1980, Pneumatic Wet Clutch & Brake with Selector Controls, Hydraulic Overload Protection, (2) Air ...more

165 Ton, Komatsu #OBS150, 7.87" stroke, 17.71" Shut Height, 3.9" adj., 27-55 SPM, air clutch & brake, 1979

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Komatsu
Model: OBS150
Year: 1979
165 TON KOMATSU OPEN BACK GAP-FRAME PRESS, SERIAL NO 70370, MODEL OBS150, New 1979 with updated controller in 1996, AIR CLUTCH & BRAKE STROKE POSITION INDICATOR PALM BUTTON CONTROLS ...more

RotoTech Low Boy 307-V, rotary grinidng table w/6" magnetic tilting head

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Rototech
RotoTech Low Boy 307-V Rotary Grinding Table w/6" Magnetic Tilting Head, Model 307-V, Variable Speed Control, Tilting Sine Plate 0-45 Degrees, 6" Magnetic Chuck, 110 V.

H Frame Hydraulic Press Machines

2 Results

75 Ton, Dake #75H, H-Frame shop press, 44" between housing, 4.5" ram, 7" screw

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Dake
Model: 75H
Dake 75 Ton H-Frame Shop Press, Model 75H, The 75H hand operated hydraulic press offers 75 tons of pressing power., This press is 87 inches tall and offers 29 5/8 inches of work head ...more

200 Ton, Dake #19-525, H-frame trvling head hydraulic straightening press, 40" stroke, 10.8' daylight, 78" between housing

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Dake
Model: 19-525
200 TON DAKE "H"-FRAME TRAVELING-HEAD, HYDRAULIC STRAIGHTENING PRESS, Serial No 190373, Model 19-525, Slow Down, Fast Raise, Frame Forward, Slow Raise, Lock Frame, Frame Reverse ...more

9" x 12" DoAll #C5A, automatic horizontal band saw, 105-275 FPM, 132" x 3/4" x .035" blade

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Doall
Model: C5A
This Saw is a project saw for someone., DoAll Automatic Horizontal Band Saw, Model No. C5A, Hydraulic powered vises, Coolant system, Roller conveyor, Baldor Super E, 2 HP Motor, 1.5 HP ...more

9" x 12" W.F. Wells #W-9, horizontal band saw, 11' 6" x 1" x .035" blade, 70-380 SFPM

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: W.F. Wells
Model: W-9
Year: 1980
WF Wells W-9 Horizontal Band Saw, 9" x 17" Capacity, S/N 803458, Machine :, Capacity:, Rectangular at 90deg. 9" High x 17" Wide, Round at 90deg. 9" Dia. Rectangular ...more

10" x 12" Startrite #H250A, automatic horizontal band saw, 126" x .04" blade, 2 HP

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Startrite
Model: H250A
10" x 12" Startrite Model H250A Automatic Horizontal Bandsaw, Rect-Cap (H)10 in, Rect-Cap (W)12 in, Rounds-Cap10 in, Power 2 hp, Type (Auto, Manual, Semi)Auto Blade, Width 19.68 ...more

10" x 16" Clausing #C250AV, automatic horizontal band saw, 1" blade, 2 HP, infeed conveyor

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: C250AV
Year: 1999
10" x 16" Clausing C250A Automatic Horizontal Band Saw, 10" x 16" Capacity, Automatic Roller Vise, 1" Blade, 2 Hp, 1725 Rpm, 230 3 Phase1235 lbs, Infeed Conveyor ...more

16" x 20" Hyd-Mech #S-23A, automatic horizontal band saw, 1-1/4" x 16'10" blade, 75-350 SFM, bundle clamps, 2008

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hyd-Mech
Model: S-23A
Year: 2008
16" x 20" Hyd-Mech Model S-23A Automatic Horizontal Band Saw w/Bundle Clamps, Maximum Cutting Capacity Rectangular 90°: 16" x 20", Maximum Cutting Capacity ...more

Cosen #AH260C, automatic horizontal band saw, 163" blade length, 96" L x 24" width x 2.3' H infeed conveyor, 1997

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cosen
Model: AH260C
Year: 1997
Model # AH-60C, Serial # C351171, Year of manufacture 03-1997, Rounds capacity 10.1", Square capacity 10.1", Blade length 163", Variable Blade Speed Option, Manual / ...more

Haas #EC-400, horizontal machining center, 70 automatic tool changer, 22" X, 25" Y, 22" Z, 12000 RPM, #40, 30 HP, thru spindle coolant, 2008

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Dayton, OH
Mfr: Haas
Model: EC-400
Year: 2008
2008 HAAS EC400 Horizontal Machining Center, X Axis Travel: 22", Y Axis Travel: 25", Z Axis Travel: 22", Rapid Rate X Axis: 1,400 IPM, Rapid Rate Y Axis: 1,400 IPM, Rapid ...more

Kiwa #KNH-400, horizontal machining center, 120 automatic tool changer, Fanuc 18I-M, (6) 15.7" x15.75" pallets, chip conveyor

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Kiwa
Model: KNH-400
#KNH-400 KIWA CNC HORIZONTAL, MACHINING CENTER, W/6-PALLETS, SERIAL NO PB6129R, MODEL KNH-, 400, FANUC #18I-M CNC CONTROL W/CRT, (6) 15.75" X 15.75" PALLETS W/, ROTARY STYLE ...more

Horizontal Hones

2 Results

Sunnen #MBB-1600, honing machine, .060"-6.5" ID, 16" length, Sunnen cabinet & tooling

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sunnen
Model: MBB-1600
SUNNEN MBB-1600 HONING MACHINE W/ Sunnen Cabinet & Tooling, LENGTH RANGE:, BORES UP TO 16" (400MM), DEPENDING ON BORE DIAMETER, SPINDLE SPEEDS:, 200, 250, 320, 400, 500, 640, 800 ...more

Sunnen #MBC-1802D, precision hone, power stroke & tooling, 230 V., 3-phase, foot pedal control

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sunnen
Model: MBC-1802D
Sunnen Precision Honing Machine, model MBC-1802, Power Stroke, auto/power foot pedal control, 230V, 3 phase, S/N 82398, I.D. Range.0600 to 6.5000 in (1,50 to 165 mm), Length Range Hones ...more

Hydraulic Power Units

1 Result

3 HP Continental Hydraulics #Polypac, hydraulic power unit, 10 gallon, 5000 psi, 208-230/460 V., 3-phase

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Continental
Continental Hydraulics Polypac Hydraulic Power Unit, 3 HP Motor;, 10 Gallon Tank;, 208-230/460V; 3 PH, 1021952, G2.4B33-020T-10V-V2R-G5N-FRC10, GEAR PUMP @ 2.4 GPM & 3300 PSI, 2 STATION ...more

Hydraulic Press Brakes

1 Result

400 Ton, Allsteel #400-12, hydra-mech press brake, 12' overall, 126" between housing, 12" stroke, 10" throat, 21" open

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Allsteel
Model: 400-12
12' ALLSTEEL 400-TON HYDRA-MECHANICAL PRESS BRAKE, SERIAL NO 4010, MODEL 400-12, SERIES C, VARIABLE PRESSING SPEED, HARDENED & GROUND WAYS, BED & RAM MACHINED TO ACCEPT ANGLES ...more

Hydraulic Straightening Presses

1 Result

200 Ton, Dake #19-525, traveling gantry straightening press

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Dake
Model: 19-525
200 TON DAKE "H"-FRAME TRAVELING-HEAD, HYDRAULIC STRAIGHTENING PRESS, Serial No 190373, Model 19-525, Slow Down, Fast Raise, Frame Forward, Slow Raise, Lock Frame, Frame Reverse ...more

Cincinnati Milacron / Heald #174, plain internal grinder, adj gap, 42" face plate, 22" table stroke, automatic lube

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 174
#174 CINCINNATI-MILACRON/HEALD ADJUSTABLE GAP-TYPE "PLAIN" INTERNAL GRINDER, SERIAL NO 49383, MODEL 174, SERIES "PLAIN", 4500 RPM HEALD "RED HEAD" GRINDING ...more

Cincinnati Milacron / Heald #174, gap type plain internal grinder, 42" face plate, automatic lube

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 174
#174 CINCINNATI-MILACRON/HEALD ADJUSTABLE, GAP-TYPE "PLAIN" INTERNAL GRINDER, SERIAL NO 50350, MODEL 174, SERIES "PLAIN", 4500 RPM HEALD "RED HEAD" GRINDING ...more

Cincinnati Milacron / Heald #174, gap type plain internal grinder, 42" face plate, automatic lube

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 174
#174 CINCINNATI-MILACRON/HEALD ADJUSTABLE, GAP-TYPE "PLAIN" INTERNAL GRINDER, SERIAL NO 48494, MODEL 174, SERIES "PLAIN", 4500 RPM HEALD "RED HEAD" GRINDING ...more

Heald #272, toolroom internal grinder, 12" 4-jaw chuck, variable speed, swing down wheel dresser

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Heald
Model: 272
#272 HEALD "TOOLROOM" INTERNAL GRINDER, Serial No. 34298, Model 272, Series "TOOLROOM", Heald "Red Head" Grinding Spindle, Swing Down Wheel Dresser, 12" ...more

Heald #275, internal grinder, 10" chuck, 6-jaw, Fagor digital read out, 72" extended bridge

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Heald
Model: 275
#275 HEALD "PLAIN" INTERNAL GRINDER, Serial No 34041, Model 275, Series "PLAIN", 72" Extended Bridge (Swivelling-Type), Fagor Digital Readouts - 10" 6-Jaw ...more

Heald #275, internal grinder, 10" chuck, 3-jaw, Anilam Mini-Wizard digital read out, 48" extended bridge

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Heald
Model: 275
#275 HEALD "SIZEMATIC" EXTENDED-BRIDGE, INTERNAL GRINDER, Serial No 37718, Model 275, Series "SIZEMATIC", 48" Extended Bridge (Swivelling-Type), Anilam ...more

Ironworkers

3 Results

4" x 4" x 3/8" Geka #11H, universal ironworker, 50 ton, 12" throat, 70 SPM

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Ironworkers
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Geka
Model: 11H
50 TON GEKA UNIVERSAL IRONWORKER, Serial No 3432, Model 11H, Plate Shear - Section & Bar Shear - Punch, Angle Shear - Notcher, CATALOG :, Tonnage Capacity, Punch End 50 TON, Throat ...more

5" x 5" x 1/2" Geka #Bendicrop-85S, ironworker, 95 ton, 6 work station, 12" throat, 2017

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Ironworkers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Geka
Model: BENDICROP-85S
Year: 2017
The 2017 Geka Bendicrop 85 is the Bendicrop Series model that offers the most punching power (93 US tons). Metal fabricators and construction companies will find the machine useful in ...more

6" x 6" x 1/2" Buffalo #1-1/2C, universal ironworker, 73 ton, assorted tooling

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Ironworkers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Buffalo
Model: 1-1/2C
6 x 6 x 1/2" BUFFALO No. 1 ½ C Universal Ironworker, w/ Assorted Tooling, 73 Ton Punch capacity, Capacities are based on mild steal 65,000 #T.S., Shear Flats 3/4" x 9 ...more

Thermco #8105AHe50A1100, gas mixer, continuous gas analysis of gas mixture, S/N 33888

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Thermco
Model: 8105AHE50A1100
Thermco 8105AHe50A1100 Gas Mixer, MXR03, s/n 33888, New 2015, 0-2000 SCFH (0-53.6 Nm3/h) Flowrate, Continuous gas analysis of the gas mixture, Surge tank design produces a constant gas ...more

Multi Spindle Drill Presses

1 Result

2 Spindle Hackett / Suhner #Monomaster, 14" drill, 7" throat, pneumatic clamp

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Hackett
Model: MONOMASTER
14" HACKETT PRECISION/SUHNER "MONOMASTER", TWIN SPINDLE DRILL W/MH20/10 SUHNER 2-SPINDLE, DRILL HEAD ATTACHMENT, Hackett Precision Frame, Suhner "MONOmaster" Drill ...more

1/4" x 6' Famco #E13754-272, mechanical, front operated power back gauge, 65 SPM, 74" knives, 2 front supports, 1996

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Famco
Model: E13754-272
Year: 1996
Excellent Condition, 6' X 1/4" FAMCO MECHANICAL POWER SQUARING SHEAR, NEW 1996, MODEL E13754-272, SERIES W, FRONT OPERATED MOTORIZED BACK GAUGE W/DIGITAL CONTROL, SHEET STACKER (2) ...more

3 Ton, Koike Aronson #PRI3, manual pipe turning rolls, 3000 lb., 2014

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Koike
Model: PRI3
Year: 2014
Excellent Condition, 6000 LB KOIKE-ARONSON MANUAL PIPE TURNING ROLLS, NEW 2014, MODELS PRI3, (2) 3000 LB KOIKE-ARONSON #PRI3 IDLER ROLLS, W/RUBBER WHEELS, (2) KOIKE-ARONSON FABRICATED ...more

Precision and Second Operation Lathes

4 Results

Hardinge #C, Super precision chucker 2nd operation lathe, dovetail bed, threading attach

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hardinge
Model: C
HARDINGE Super Precision Chucker Mdl. C 2nd Op Lathe, Dovetail Bed, 8 Position Turret, 125-3000 RPM, Hardinge Lathe Threading Attachment, Mdl.A1.5 HP, Draw Bar, 5C Threaded Spindle Nose ...more

Hardinge #HLV, super precision lathe, Aloris toolpost, dove tail, 5C collet closer

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hardinge
Model: HLV
Year: 1961
HARDINGE HLV "SUPER PRECISION" LATHE, Model HLV, Aloris Toolpost, Dovetail, Chip Guard, 2 Spindle Guards, 5C Collet Closer, 32- 5C Collets, SPEC SHEET, Max Swing Over Bed: ...more

Hardinge #TFB-H, super precision toolroom lathe, 11" swing x 18" centers, 5C collet closer, 1.25" hole, tooling

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hardinge
Model: TFB-H
Hardinge Super Precision Toolroom Lathe, Model #: TBF-H, Spindle Motor: 1.5 Hp, 220v, 3ph, 60 Hz, Taper Attachment, Collets and Tooling Included, Control Voltage: 115V, Swing Over Bed: ...more

Monarch #EE, 10" x 20" precision tool room lathe, 7.25" swing over cross slide, 10.5" x10.25" bed, 1962

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: EE
Year: 1962
10" x 20" Monarch Model EE Precision Tool Room Lathe, New 1962, PEC# 3416-25-11-24, Swing over bed 12.5", Swing over crosslide 7.25", Distance between centers 20" ...more

Jenny #SJ-70-OEP, steam cleaner, 110 V., 60 htz, 1-phase, 0.5 HP

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Jenny
Model: SJ-70-OEP
Steam Jenny Steam Cleaner Model SJ 70-OEP 110v, 60htz, 1 Phase - 0.5hpSteam Jenny SJ 70-OEP 110 Volt, 60 Hertz, 1 Phase Steam Cleaner, 1/2 HP, single phase heavy duty industrial motorGround ...more

Radial Drills

3 Results

3.3'-9" Arboga #RLM3512, radial arm drill, #4MT

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Radial Drills
Seller: Machinery Central
Location: Louisville, KY
Mfr: Arboga
Model: RLM3512
ARBOGA 40" x 9" Radial Arm Drill RLM3512, Max. Distance Spindle Center to Column Face: 39 3/4", Min. Distance Spindle Center to Column Face: 14 5/8", Max. Distance ...more

4' -12" Sharp #RD-1230, radial arm drill press, 9.87" stroke, #4MT, arm elevation, 2006

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Radial Drills
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Sharp
Model: RD-1230
Year: 2006
4' x 12" SHARP Model RD-1230 RADIAL ARM DRILL PRESS, New 2006, This is a high performance machine ideal for drilling, tapping, boring, reaming, lapping, screwing, counter boring ...more

4' -12" Sharp #RD-1230, radial arm drill press, 9.87" stroke, #4MT, 2000

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Radial Drills
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Sharp
Model: RD-1230
Year: 2000
4' x 12" SHARP Model RD-1230 RADIAL ARM DRILL PRESS, New 2000, This is a high performance machine ideal for drilling, tapping, boring, reaming, lapping, screwing, counter boring ...more

Reciprocating Surface Grinders - Horizontal Spindle

6 Results

6" x 12" Harig #612, automatic surface grinder, Walker electromagnetic chuck, 8" dia. x 1" W x 1.25" wheel

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Harig
Model: 612
6" X 12" HARIG AUTO STEP SURFACE GRINDER, Model # 612 with Auto Step III, Rated Grinding Capacity: 6" x 12", Grinding Wheel Size: 8" Diameter x Approx. 1" ...more

6" x 18" Harig #618-Automatic, Walker electromagnetic chuck, 208-220/440 V., 3-phase, 3450 RPM

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Harig
Model: 618-AUTOMATIC
Harig Automatic Surface Grinder., Model: 618 AutomaticChuck Size: 6" x 18" Walker ElectromagneticBed Way: Roller BearingMagnetic Chuck: Walker Electromagnetic 6" x ...more

6" x 18" Okamoto, linear hand feed surface grinder, electromagnetic chuck, 8" x 1" x 1-1/4" wheel

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Okamoto
Year: 1985
Okamoto 6" x 12"/14" Linear Hand Feed Surface Grinder, Table Travel: X: 21", Y: 8", Equipment Included:, Whell Dresser, Walker 6" x 12" Magnetic Chuck ...more

Harig #618-Autostep, hydraulic surface grinder, 7" x 0.5" X 1.25" wheel, automatic incremental downfeed, Anilam Wizard 450 digital read out

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Harig
Model: 618-AUTOSTEP
MAKE. HARIG, MODEL. 618 AUTOSTEP, CHUCK SIZE. 6" x 18", STANDARD GRINDING WHEEL SIZE. 7" x 0.5" X 1.25", MAXIMUM GRINDING WHEEL SIZE. 8" x 1.25" x ...more

8" x 24" Brown & Sharpe #824, hydraulic feed horizontal spindle surface grinder, automatic down feed, power elevation, 1983

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Brown & Sharpe
Model: 824
Year: 1983
8" X 24" BROWN & SHARPE "MICROMASTER/DIAL-A-SIZE", HYDRAULIC-FEED HORIZONTAL-SPINDLE SURFACE GRINDER, NEW 1983, SERIAL NO 523-824-2340, MODEL 824, DIAL-A-SIZE FULLY ...more

9" x 19" Clausing Equiptop #CSG-818ASD-II, semi-auto 2-Axis hydraulic surface grinder, top wheel dresser, 2006

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: CSG-818ASD-II
Year: 2006
Clausing Equiptop CSG-818ASD II Semi Automatic 2 Axis Hydraulic Surface Grinder w/ Built in Wheel Dresser, Coolant Tank, Dust Collector, Hydraulic Tank, Table size: 8" x 18", Max. ...more

Rotary Table Surface Grinders - Vertical Spindle

1 Result

RotoTech Low Boy #710V, rotary grinding table, 10.5" non-magnetic chuck, variable speed Control

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Rototech
Model: 710V
RotoTech Low Boy 710V Rotary Grinding Table, S/N RP-4823, Variable Speed Control, Forward and Reverse Direction, 10 1/2" Non Magnetic Chuck, 110 V.

Single Crank OBI Flywheel Press Machines

2 Results

60 Ton, Minster #6, OBI press, 4" stroke, 13" Shut Height, 3" adj., 11" throat, 90-180 SPM, air clutch & brake

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Minster
Model: -6
60 TON MINSTER O.B.I. PRESS, Serial No 6-15729, MODEL 6, Air Clutch & Brake, Reeves Variable-Speed Drive, Flywheel Design w/7.5 HP Motor, CATALOG :, Tonnage Capacity 60 TON, Stroke ...more

66 Ton, Komatsu #OBS60, OBS press, pneumatic wet clutch & brake, 75-150 SPM, 1980

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Komatsu
Model: OBS60
Year: 1980
EXCELLENT CONDITION-, Komatsu 66 Ton OBS Press, Mdl# OBS60, S/N#10626, New 1980, Pneumatic Wet Clutch & Brake with Selector Controls, Hydraulic Overload Protection, (2) Air ...more

Single Spindle Drill Presses

5 Results

20" Powermatic #1200, single spindle drill press, 6" spindle travel, variable speed, 10" throat, 2 HP, 110 V.

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Powermatic
Model: 1200
Powermatic 20" Drill Press, Variable Speed, s/n 120V028, Model 1200HD Drill Press, Drill Capacity ( Steel)" 1 1/4".

20" Powermatic #1200HD, single spindle drill press, 6" spindle travel, variable speed, 10" throat

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Powermatic
Model: 1200HD
Model 1200HD Drill Press, Drill Capacity ( Steel)" 1 1/4", Excellent Condition.

20" Solberga #SE-2035, geared head drill press, 12" throat, 6" spindle travel, #4MT, 1999

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Solberga
Model: SE-2035
Year: 1999
20" Solberga Geared Head Drill Press Model SE-2035Power Down Feed 12" ThroatT-Slotted Table & BaseSwedish MadeAdjustable Drill HeadAdjustable TableProcunier Tapping HeadJacobs ...more

21.25" Kira #KRTG-540, single spindle drill

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Kira
Model: KRTG-540
21.25" KIRA GEARED HEAD FLOOR STANDING, SINGLE-SPINDLE DRILL, Serial No 53403, Model KRTG-540, Geared Head Design, Round-Column Design, Power Down-Feed to Spindle, CATALOG :, Drilling ...more

Wilton #2401, geared head drill press, PDF, custom table w/ rollers

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Wilton
Model: 2401
Wilton model 2401 Geared Head Drill Press w/Powered Down Feed, Custom Table w/ Rollers, 5,000lb capacity, Cast Iron Drilling Capacity (in.) 1-1/2, Steel Drilling Capacity (in.) 1-3/8, Cast ...more

15.7"/23" x 50" Harrison #Alpha-400-Plus, 12" chk, 3-jaw, D1-6, Steady Rest, tailstock, 1997

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Harrison
Model: ALPHA-400-PLUS
Year: 1997
15.75/23" x 50" HARRISON/600GROUP "ALPHA 400 PLUS" GAP-TYPE 2-AXIS COMBINATION MANUAL/CNC LATHE, Serial No A30548/0420, MODEL 400 Plus, Series Alpha, Harrison GE/Fanuc ...more

24/34" x 135" Dainichi #DH135, heavy duty gap engine lathe, 18" chk, 4-jaw, 16" chk, 3-jaw, Steady Rest, taper, power rapid traverse

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Dainichi
Model: DH135
24/34" x 135" DAINICHI HEAVY-DUTY GAP-TYPE ENGINE LATHE w/TAPER ATTACHMENT, Serial No. 6948, Model DH135, Taper Attachment, Threading (Inch-Metric Full-Length Lead Screw) ...more

Storage Equipment (Cabinets And Tables)

2 Results

heavy duty press brake die rack w/4 sliding drawer, 12' L inside capacity, excellent cond.

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Model: HEAVY DUTY PRESS BRAKE DIE RACK W/4 SLIDING DRAWER
Heavy Duty Press Brake Die Rack W/4 sliding drawers, 12' long inside capacity, Die Rack for Press Brake Dies, Extra Heavy Duty, 4 sliding drawers on rollers, 12' long inside ...more

Stanley Vidmar #2K, stak system, pallet stacking/retrieval system, 43" rack depth

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Goldfield, IA
Model: STANLEY VIDMAR #2K
Stanley Vidmar 2K Stak System Pallet Stacking/Retrieval System, 7 bays Per side (14 total bays) Long, 2,000lbs per pallet for 42" Deep x 52" Wide Pallet Size., System is repainted ...more

Sump Pumps

3 Results

Cecor #SA3-DT Sump Shark cleaner with Cecor TX-55PL drum tank, air powered

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Sump Pumps
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cecor
Model: SA3-DT
CECOR SUMP SHARK CLEANER MODEL SA3-DT W/ CECOR MODEL TX-55PL DRUM TANK, CECOR SUMP SHARK CLEANER MODEL SA3-DT, CECORs smallest air powered high-end sump cleaner, SA3-DT is the starting ...more

CECOR Air-Operated Sump Sucker, 175 gallon tank, up to 70 GPM

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Sump Pumps
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cecor
CECOR Air- Operated Sump Sucker, Filter metalworking fluid right at the machine toolDeep vacuum sucks sludge and fluid out of sump fastDischarge filtered metalworking fluid back to machine ...more

Master Chemical Corp. yellow bellied sump sucker

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Sump Pumps
Seller: Machinery Central
Location: Louisville, KY
Mfr: Master
Master Chemical Corporations XYBEX® Fluid Recycling Equipment offers you fluid management solutions that can make all the difference to your bottom line. Every metalworking plant faces ...more

Starrett, granite surface plates, grade A, various sizes, w/rolling cart

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Surface Plates
Seller: Machinery Central
Location: Louisville, KY
Mfr: Starrett
8 granite surface plates, most are Starrett all are grade A and have inspection stickers., Granite Surface Inspection Plate Grade A & B for Sale:, 8. 36" x 48" x 6" ...more

Table Blast Cleaning and Shot Peening

1 Result

36" MEC #SB:SP:6, 6-Station rotary shot blast system w/MEC dust collector

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Mec
Model: SB:SP:6
Year: 2008
44" MEC 6-STATION ROTARY TABLE ABRASIVE, BLASTING MACHINE w/DUST COLLECTOR, New 2008, Serial No M 4851, Model SB:SP 6, 3 HP Mec Shop #DC2 PJ-4 Dust Collector (S/N M4831) w/(4) Filters ...more

3 HP Campbell Hausfeld, single stage air compressor, 60 gallon, 240 V., 1-phase

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Campbell
Campbell Hausfeld 3-HP 60-Gallon Single-Stage Air Compressor (240V 1-Phase), Cast Iron Twin Cylinder PumpOil-lubricated for extended performanceUp to 5,000 hours of life (based on B-10 ...more

Thread Rollers

1 Result

Pee-Wee #P20.8G, CNC AC fully automated cold forming thread roller, Siemens Simatic mobile panel CNC Control, 22 ton, 2012

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Thread Rollers
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Pee Wee
Model: P20.8G
Year: 2012
22 TON PEE-WEE "P20.8G CNC AC", FULLY-AUTOMATED COLD-FORMING THREAD ROLLER, New 2012, Installed 2014, Serial No P11.0122, Model P20.8G CNC-AC, Siemens "Simatic" Mobile ...more

13.77" x 13.77" x 25.59" Tombstone, Jergens .98" face mount ball lock system

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Tombstones
Seller: Machinery Central
Location: Louisville, KY
Model: 13.77 X 13.77 X 25.59 TOMBSTONE
LEAVE 350mm X 350mm X 650mm Tombstone with JERGENS 25mm Face Mount Ball Lock System.

Multi-Precision, hydraulic tombstone fixture, tool #2604-20, 2017

Machinery Central | Louisville, KY | Denis Frankenberger |
Category: Tombstones
Seller: Machinery Central
Location: Louisville, KY
Model: MULTI-PRECISION
Year: 2017
Multi-Precision Manufactured Hydraulic Tombstone Fixture, s/n 002, Tool # 2604-20, New 2017, Excellent Condition.

Universal Cylindrical Grinding Machines

1 Result

12.6" x 40" Shigiya #GUA-30-100 automatic infeed hydraulic universal cyl grinder w/internal attach

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Shigiya
Model: GUA-30-100
12.6" x 40" SHIGIYA AUTOMATIC INFEED HYDRAULIC, UNIVERSAL CYLINDRICAL GRINDER w/INTERNAL ATTACHMENT, Serial No 5976, Model GUA30-100, Swing Down Internal Attachment, Automatic ...more

Hurco #VMX-84, vertical machining center, 40 automatic tool changer, 84" X, 34" Y, 30" Z, 10000 RPM, #40, 20 HP, rigid tap, chip conveyor, 2010

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hurco
Model: VMX-84
Year: 2010
HURCO Model VMX84 Vertical Machining Center with X-84", Y-34", Z-30" Travel., Manufactured 12/09/2010., Machine installed in original owners plant in Kentucky 2011., Can be ...more

Roto-Finish, vibratory tumbler, 5 HP Dayton motor, 54" ID, wall mounted Control box w/ timer

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Louisville, KY
Mfr: Roto-Finish
Roto Finish Vibratory Tumbler, 54" Inner Diameter w/Polyurethane covering inside, 5 HP Dayton Motor, 6" x 12" Media door, Built in ramp with lever, Wall Mounted Control Box ...more

2000 lb. Koike Aronson #HD20A, gear-driven welding positioner, pendant Control w/ variable speed

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Koike
Model: HD20A
2000 LB KOIKE-ARONSON WELDING POSITIONER, Serial No 43839, Model HD20A, Pendant Control w/Variable Speed, 360-Degree Variable Speed Power Rotation, 135-Degree Power Tilt, 24" T-Slotted ...more

50000 lb. Koike Aronson, geared elevation welding positioner, 84" x84" squaring table

Machinery Central | Louisville, KY | Denis Frankenberger |
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Koike
, 84" X 84" T-SLOTTED SQUARE TABLE, GEARED POWER ELEVATION, PENDANT CONTROL W/VARIABLE SPEED CONTROL, CATALOG :, HOLLOW SPINDLE DIAMETER 11.875", TABLE DIMENSIONS, DIAMETER ...more