Liberty Machinery Co
Lincolnshire, IL 60069-3603
Platinum Level Dealer
Surplus Record Dealer Since 1996
Contact
Peter Sonneborn
About
Liberty Machinery Company is an internationally recognized dealer in the business of purchasing and reselling pre-owned metalworking and fabricating machine tools. No piece of equipment would pass through their doors unless they are completely satisfied that it was the best machine they could offer to their customers.Liberty Machinery Co.,is a Surplus Record Gold Level Dealer:
1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1996.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy nearly 40 years listing with Surplus Record without unresolved complaint or incident.
Products & Services
- Automatic Screw Machines & Chuckers
- Benders, Bar, Pipe, Tube
- CNC Machinery
- Electrical Discharge Machines Ram/Wire
- Grinders
- Hones, Horz/Vert
- Keyseaters
- Lapping Machines
- Polishing Machinery & Plating Equipment
Associations & Affiliations
107 listings in 59 categories
Dynetics #HL30, 6.25" Cyl. Dia, 30 GPM Displacemnt, 500 PSI Media, Media Chiller, 1997
Category: Abrasive Flow Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Dynetics
Model: HL30
Year: 1997
New - 1997, Serial No. H2436, Distance between Pillars.15.875" (403 mm), Standard Opening - Maximum.10.625" (270 mm), Standard Opening - Minimum.1.625" (42 mm), Work Table Height.38" (965 mm), Cylinder Diameter.6.25" (159 mm), Cylinder Capacity.368 Cu. Inches (6030 cc), Media Displacement - Maximum.30 GPM (114 l/m) ...more
Extrude Hone #77C, 3.25" media tube diameter, 2000 psi, 5 HP power pack, Touchscreen Control, 1994
Category: Abrasive Flow Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Extrude Hone
Model: 77C
Year: 1994
New - 1994, Serial No. M94-0917, Workable Height.42", Column Spacing.14.75", Maximum Opening - Mode A.8.75", Maximum Opening - Mode B.6.75", Overall Dimensions.30" D x 30" W x 96.25"H, Approximate Weight.2,100 Lbs., Media System - Mode A:, Media Tube Diameter.6", Media Tube Capacity.311 Cu. Inches 20 Lbs. ...more
Extrude Hone #8/6-Vector-200 Special, 860 PSI Extrusion Pressure, AB Micrologix 1200, 2003
Category: Abrasive Flow Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Extrude Hone
Model: 8/6-VECTOR-200
Year: 2003
New - 2003, Serial No. R03-1304, Media Cylinder Diameter.3.5", Media Cylinder Capacity.53 In.³, Media Stroke Length.5.5", Clamping Cylinders Stroke.12", Hydraulic Clamping Force.29.4 Ton, Opening Between Tooling Plates - Maximum.14", Worktable Height.41", Distance Between Columns.36", Compressed Air Required.58 ...more
Extrude Hone #Spectrum-10/8/8, 10" media cyl diameter, 8" hyd cyl diameter, 1200 psi Extrusion Pressure, PLC, 2005
Category: Abrasive Flow Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Extrude Hone
Model: SPECTRUM-10/8/
Year: 2005
Extrude Hone Spectrum 10-8-8 Abrasive Flow Machine, New - 2005, Serial No. P05-1395, Media Tube Diameter.10", Media Hydraulic Cyl Bore.8", Clamp Hydraulic Cyl Bore.8", Media Pressure - Maximum.1200 Psi, Lower Media Piston Stroke.18.5", Media Capacity - Volume.1,600 Cu. Inches, Media Capacity - Weight.100 Lbs., Media ...more
Balancing Machines (Dynamic and Static)
1 Result
50 lb. Hines #HVR-50, vertical, 1-plane, 18" x 6" H part capacity, 2006, Dynics FX15 in 2024
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hines
Model: HVR-50
Year: 2006
New - 2006, Control Upgrade - 2024, Serial No. 3096-04A, Part Capacity:, - Mass.50 Lbs., - Diameter.18", - Height.6", Orientation.Vertical, Balance planes.Single, Material removal.Manually via drill press, Electrics.480V/3Ph/60Hz, Dimensions- Approximate.40"L x 40"W x 85"H, Weight - Approximate.1,500 Lbs., Dynics FX15 ...more
Batch Type Furnaces/Ovens
1 Result
26" width x 26" L x 26" H Precision Quincy 26-650, 650 Deg F, Stainless, Chart Recorder, 2000
Category: Batch Type Furnaces/Ovens
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Precision Quincy
Year: 2000
New - 2000, Serial No. 13562, CATALOG :, Temperature - Maximum.650°F, Heat Input.9.8 KW, Fuel.Electric, Recirculation Fan:, - Capacity.510 CFM, - Motor.0.5 HP, Insulation.5", Control Accuracy.±0.3%, Internal Dimensions - Actual:, - Workspace.26"(W) x 26"(D) x 26"(H), - Volume.10 CuFt, External Dimensions - ...more
Bed and Knee Milling Machines - Vertical
1 Result
Bridgeport #Series-I, 9" x48" table, 30" X, 12" Y, 16" Z, 2 HP, power feed table & knee, R-8, digital read out
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Bridgeport
Model: SERIES-I
Serial No. 195522, Travels:, - X-Axis - Table.30", - Y-Axis - Saddle.12", - Z-Axis - Knee.16", - Quill.5", - Ram.12", Throat Distance.6.75" - 18.75", Table:, - Spindle Nose to Gauge Line.2.5" - 18.25", - Table.48" x 9", - T-slot Centers.3 @ 2.5", - T-slot Size.0.625", - Weight of Workpiece - Maximum.750 Lbs. ...more
59" width x 47" H x 43" D Nabertherm #N2000/60HA-DB200-4, 1112°F, Electric, 2018
Category: Box Type Furnaces
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Nabertherm
Year: 2018
New Never Commissioned - 2018, Serial No. - 345806, Oven Chamber.59"W x 43.3"D x 47.2"H, Work Space.51.2"W x 35.4"D x 39.4"H, Oven Chamber Volume.70.6 cu. ft., Charging Height.13.4", Operating Temperature - Maximum.1112°F, Working Temperature Range.302°F - 1112°F, Outer Dimensions.93.7"W x 78.7"D x 82.7"H ...more
Brazing and Sintering Furnaces
1 Result
Dr. Fritsch #DSP-517, 67.7T, 8.85" OH, 3-Fold Control, 31" Sq. Pressing Area, 2020
Category: Brazing and Sintering Furnaces
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Dr. Fritsch
Year: 2021
From Dr Fritsch Literature ~ "The DSP 517 is an automatic pressure sintering press for sintering metal-, ceramic- or resin-bonded workpieces. It works according to the principle of resistance heating by means of electrical current and hydraulic operating pressures up to 300 bar.", New - 2021, Pressing Force:, - ...more
C Frame Hydraulic Press Machines (Gap Frame)
1 Result
40 Ton, Greenerd #HCA-40-30R, 24" stroke, 36" DLO, 15" throat, 26" x 15" bed, 20 HP, 2002
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Greenerd
Model: HCA-40-30R
Year: 2002
New - 2002, Serial No. 02T6178, Tonnage.40, Bed area.26"(L-R) x 15"(F-B), Bed bolster - T-slotted.32"(L-R) x 16"(F-B) x 2"(T), 4-Post guided slide.24"(L-R) x 12"(F-B), Slide bolster - T-slotted.32"(L-R) x 16"(F-B) x 2"(T), Stroke.0 - 24", Daylight opening (total).36", Throat depth.15", Ram diameter.6"/4" @ 2830 PSI - ...more
Acme No. C2, centerless polisher, 1/8"-6"dia capacity, 6" W wheel,thru/infd,PLC,VFD, 2013, #47327
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Acme
Year: 2013
Centerless Polishing Machine - Acme C-2, New - 2013, Serial No. 30040, Working Capacity.1/8" - 6" Dia., Wheel Capacity - Maximum.16" x 6" x 2", Grinding Spindle Motor (Direct Drive Gear Box).7-1/2 HP, 1,800 RPM, Grinding Spindle In/Out Motorized.1/2 HP, Regulating Wheel (Rubber Covered).14" x 6" x 2", Regulating Wheel ...more
Cincinnati No. 15 Mdl. Cinco, 3" cap., 24" x 8" wheel, 15 HP, Aercology FDV-3000 mist collector
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Cincinnati
Model: CINCO
Serial No. 35020005Z-0010, Capacity with Standard Work Rests…………0″ – 3″ Diameter, Capacity Work Diameter – Maximum…………4″, Grinding Wheel Size…………8″ x 24″ x 12″(Bore), Grinding Wheel ...more
Cincinnati No. 2 Mdl. 0M, 1/16" to 4-3/4" part diameter, 8" W x 20" dia. wheel, 15 HP, AER Control systems mist collector
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Cincinnati
Model: 0M
Serial No. 2M2H2T-73, Capacity - Depending on work rest:, - Standard work rest…………1/16" to 3 1/2" dia., - Low thru feed work rest…………2" to 4 3/4" dia., - Bar work…………1/8" to 2" dia. 18" long, Grinding Wheel:, - ...more
Royal Master No. TG12X4, Hydraulic Profile Dresser, Infeed Lever, Coolant, 1992
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Royal Master
Year: 1992
Serial No. 1987, Year Built - 1992, Infeed Capacity - Diameter.0.004" - 1.5", Thrufeed Capacity:, - Diameter.0.004" - 1.5", - Length.12' (up to 0.5" Dia.), Grinding Wheel:, - Maximum Size.12" Dia. x 4" Wide, - Minimum Size.10" Dia. x 0.25" Wide, - Speed - Constant.2,040 RPM, Regulating Wheel:, - Maximum Size.6" ...more
Supertec No. STC-20, 0.004"-4.72" cap., hydraulic dresser, 20 HP, coolant system, mist collector, 2004
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Supertec
Year: 2004
Serial No. CB04006, Year Built - November 2004, Installed - 2005, Grinding Capacity:, - Standard Workrest.0.04" - 3.15", - Special Workrest.3.15" - 4.72", Grinding Wheel:, - Wheel Size (Diameter x Width x Bore).20" Ø x 8/10/12" x 10", - Spindle Speed.1350 RPM, - Dressing Increment.0.00005" per graduation ...more
Unison DedTru No. C, .25"-1025" part capacity, DC Control, sine base, work blades, pressure rolls
Category: Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Unison
Serial No. 4227, Part Capacity:, - Standard.1/4" - 1-1/4" Dia., - With Optional Accessories - Not Included.5" Dia., Regulating Roll.4-1/4" x 4"W, Electrics.115V/1Ph/60Hz, Dimensions - Actual.24" x 11" x 8.5"(H), Unison DedTru Model 361-1 Power Supply (S/N 0939), Sine Base, Work Blades, Pressure Rolls, Guides ...more
15" Rosler #Zentrifuge-Z-800, semi-auto centrifuge, 317 GOH, 88 lb. max load, 2012
Category: Centrifuges
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Model: ZENTRIFUGE-Z-800
Year: 2012
New - 2012, Serial No. 55731, Hours - 5005, Output – Maximum…………317 GPH, Load – Maximum…………88 Lbs., Speed – Maximum…………2,850 RPM, Load Temperature – Maximum…………122 Deg. F, Room ...more
.4 Ton, Haskris #R050, Air-cooled, 55°F Min, 2-Zone, 1 GPM/Zone, 2010
Category: Chillers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Haskris
Model: R050
Year: 2010
New - 2010, Serial No. HB22007, Tonnage.0.4, Cooling.Air, Zones.2, BTU.4,775 BTU/hr, Refrigerant.R134A, Lowest Temp Setting.55°F, Fan.1, Tank Capacity.5 Gal., Pumps (2 Total).1/3 HP each, Max Flow.1 GPM each at 45psi, Inlet/Outlet Connection.1/2", Electrics.208/230V/1Ph/60Hz, Weight - Approximate.350 Lbs ...more
CNC Angle Head Cylindrical Grinders
1 Result
13" x 25.6" Okuma #GP26W, OSP-P300GA CNC Control, SBS #SB-5500 automatic balancer system, 2017
Category: CNC Angle Head Cylindrical Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Okuma
Model: GP26W
Year: 2017
New - 2017, Power On Time: 31,216, NC Run Time: 8810, Spindle Revolution Time: 9124, Grinding Time: 8766, CATALOG :, Distance between centers.25.59", Swing over table.12.99", Grinding diameter - maximum.7.87", Workpiece Weight - Maximum:, - Center supported.110 Lbs., - Chuck supported.88 Lbs. x 7.87", Wheel:, - ...more
Monza #1500, Fanuc 35i-B Control, 6.5" cap., 14" W x 20" dia. wheel, infeed automation, 2014
Category: CNC Centerless Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Monza
Model: 1500
Year: 2014
Year Built - 2014, Serial No. 5606, Thru-Feed Grinding Diameter.6.5", Infeed (Plunge) Grinding:, - Diameter.0.040" - 6.5", - Length - Maximum.14", - Accuracy.2 Microns (at 1.2" diameter), Grinding Wheel:, - Diameter.20", - Width.14", - Bore.10", - Speed.1,200 RPM, - Power.40 HP, Regulating Wheel:, - Diameter.12", - ...more
Mazak #Integrex-100-IVST, Mazatrol Matrix Control, 21" swing, 13.86" swing over cross slide, 2" bar, collet chucks, 2013 (3 available)
Category: CNC Lathes and Turning Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mazak
Model: INTEGREX-100-IVST
Year: 2013
New - 2013, Travels:, - X-Axis.16.14", - Y-Axis.±2.75", - Z-Axis.31.69", Increments:, - B-Axis.0.0001°, - C-Axis.0.0001°, Center distance.30", Swing over bed.21.46", Cutting/Turning Capacity:, - Length - maximum.29.65", - Diameter - maximum.21.46", Spindle:, - Bar capacity.2.00", - Chuck type.Collet, - ...more
Mori Seiki #NL-2000/500, 8" chuck, 2.5" bore, 20" L capacity, 12 station turret, prog tailstock, 2007
Category: CNC Lathes and Turning Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mori Seiki
Model: NL-2000/500
Year: 2007
New - 2007, Serial No. NL201GB1665, Operation Time - 9,259 Hours, Cutting Time - 7,022 Hours, Chuck Size.8", Swing - Maximum.22.8", Bar Diameter Capacity - Maximum.2.5", Turning Length - Maximum.20.1", Spindle:, - Motor.24.8 HP, - Speed. 5,000 RPM, - Nose.A2-6, - Bore.2.9", Rapid Traverse Rates.1,181 IPM, Travels:, - ...more
400 Ton, Accurpress #7400-14, CNC hydraulic press brake, 14' overall, 148" between housing, 10" stroke, 20" open, 10" throat, ETS 3000, 2005
Category: CNC Press Brakes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Accurpress
Model: 7400-14
Year: 2005
New - 2005, Factory Control Upgrade - 2021, Capacity.400 Tons, Bed:, - Length.14', - Distance between frames.148", - Height.38", - Cap width.12", Ram stroke.10", Open height.20", Closed height.10", Throat depth.10", Speeds:, - Fast approach.60 IPM, - Slow bend.18 IPM, - Fast return.112 IPM, Cycles per Minute [Fast ...more
CNC Rotary Tables and Indexers
4 Results
4.33" Haas #HRT110, 4.33"platter, 3" center height, +/-45 arc sec accuracy
Category: CNC Rotary Tables and Indexers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Haas
Model: HRT110
"The Mini Mill rotary table Haas HRT110 is a single-axis rotary table driven by an 80:1 harmonic drive system coupled to a powerful brushless servo motor to provide indexing speeds up to 300°/sec, and spindle torque of 65 ft-lb. Smaller than a 7" cube and weighing just 29 lb, the HRT110 rotary table provides ...more
6.7" Nikken #5AX-2" MT-170-200FA, Dual-Axis Trunnion, Fanuc Servo, 2005
Category: CNC Rotary Tables and Indexers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Nikken
Model: 5AX-2MT-170-200FA
Year: 2005
New - 2005, Serial No. 2004, Number of Rotary Axis Spindles.2, Diameter of Table Face Plates.6.69", Pitch Distance between Spindles.7.87", Diameter of Spindle Hole.1-5/8", Center Height.5-3/16", Width of T Slots.0.5", Workload on Table - Maximum., Weight - Approximate.600 Lbs., Fanuc servo, Instruction Manual ...more
8.6" Nikken #CNC-200LF, rotary table, 8" 3-Jaw Autoblok chuck, 4th Axis drive, tailstock, 1995, #47800
Category: CNC Rotary Tables and Indexers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Nikken
Model: CNC-200LF
Year: 1995
Nikken CNC 200 LF, Serial No. 3477, New - 1995, Table Size.8.60" (220 mm), Rotation Speed.16.6 RPM, Diameter Spindle.60 x 52 mm, Total Reduction Ratio.1:90, Motor:, - Maker.Fanuc, - Mounting Location.Left, Approximate Weight.75 Lbs., 8" 3-Jaw Pneumatic Autoblok Chuck, Pneumatic Tailstock, 4th Axis Drive, Connection ...more
Haas #HA5C2, 2 spindle rotary indexer, 5.875" center height, 5C collet, air collet closer
Category: CNC Rotary Tables and Indexers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Haas
Model: HA5C2
Haas HA5C2 Two-Spindle Rotary Indexer, NOTE: Controller shown in video is NOT included with the indexer, CATALOG :, Weight on Platter - Maximum:, - Supported.10 Lbs., - Unsupported.5 Lbs., Spindle:, - Number.2, - Speed - maximum.200°/Sec., - Torque - continuous.25 Ft.-LbF, - Nose thread.2-3/16" - 10, - Runout - ...more
CNC Vertical Universal Grinders
1 Result
Campbell #750, Fanuc 160iM, 30" table, 30 HP, 7200 RPM, spindle swivel, rotary dress, 2008
Category: CNC Vertical Universal Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Campbell
Model: 750
Year: 2008
New - 2008, Table Diameter - Maximum.36", Swing Diameter - Maximum.38", Top of chuck to bottom of rotating assembly (spindle).32-3/4", Part Height - Maximum.24" (Arbor Dependent) and Approach Dependent, Angular or Straight Approach, X-Axis.36", Z-Axis.36", Main Grinding Spindle (Setco).30 HP / 7200 RPM, Spindle ...more
Coolant Filtering Systems
2 Results
ChipBlaster #H30, high pressure coolant filtration system, 1000 psi, MistBlaster, ChipChiller, 8 gpm, dual filter, 2016
Category: Coolant Filtering Systems
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Chipblaster
Model: H30
Year: 2016
New - 2016, Serial No. N841, ChipBLASTER H30 High Pressure Coolant Filtration System:, - Pressure - Maximum.1000 psi, - Coolant Volume.8 gpm, - Coolant Tank Capacity.100 Gal., - Filters.5 Micron, 1 Micron, MistBLASTER Mist Collector:, - Airflow - Maximum.1200 cfm, - Pressure Output - Maximum.0.4" WC, - Horsepower - ...more
Hydraulic Systems, P/N 213981, 22 GPM, 650 psi, dual pump, Rosedale filter, 2010, #43909
Category: Coolant Filtering Systems
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hydraulic System
Year: 2010
New - 2010, Serial No. HU3500190-6-60, Pressure - Maximum.650 PSI, Flow.22 GPM, Filtration.50 Microns, Number of Motors.2, Motor Power.13.4 HP, Motor Speed.3,600 RPM, Electrics.460V/3Ph/60Hz, Dimensions - Actual.38" x 26" x 56"(H), Weight - Approximate.750 Lbs., Dual Motor Design, Rosedale Filter, *Preliminary Subject ...more
Earth Chain #HD-765, spinner deburring machine, 11-26 lb. batch capacity, 25" x 10" container
Category: Deburring Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Earth Chain
Model: HD-765
"The sPINner Deburring Machine is optimized for use with precision non-ferrous metals, including all your small aluminums, brasses, coppers, stainless steels and titanium parts. Typical deburring cycles last just 15 to 20 minutes, with duration and intensity adjustments allowed through the built-in control panel. The ...more
Hammond, Roto-Finish #Roto-Max-RM-2ND, 2 cu.ft., dry process, 5 HP, Allen-Bradley controls, 1994
Category: Deburring Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hammond
Model: ROTO-MAX-RM-2ND
Year: 1994
Hammond Roto-Finish RM-2ND Dry Process Centrifugal Disc Deburring Machine, Year Built - 1994, Serial No. RM-2ND-94-B4, Hours - 8,715, Process Capacity - Maximum.2 cu.ft., Total Capacity.3.945 ct. ft., Bowl Height.64", Diameter.25.5", Process Type.Dry, Motor.5 HP, Electrical.230/460V, Dimensions - Approximate.56"L x ...more
Sugino #JCC-6535E Jet Flex Center II, 6-station turret, 44 lb. part capaity, 2003
Category: Deburring Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Sugino
Model: JCC-6535E
Year: 2003
Sugino Jet Clean Flex Center II Model JCC-6535E High Pressure Deburring, Washing, and Cutting System. The Jet Clean Flex Center II combines a Sugino CNC-based deburring station to remove all types of burrs from complex shaped parts made of many different materials--aluminum, cast iron, stainless steel, plastics and ...more
Surftran, thermal deburring TEM 7" chamber, #49099
Category: Deburring Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Surftran
Quantity (1) 7" Chamber for Surftran Thermal Deburring Machine, Markings : 1193 and 281628A, *Preliminary, pending confirmation.
Surftran, thermal deburring TEM 10" chamber, #49102
Category: Deburring Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Surftran
Quantity (1) 7" Chamber for Surftran Thermal Deburring Machine, Markings : 1260 | 12, Cooling Shroud, *Preliminary, pending confirmation.
Engis #LPM-6000, up to 6" ID, 6 spindle + chamber, 10 pos table, coolant filter, Mitsubishi Control, 2013
Category: Diamond Bore Sizing Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Engis
Model: LPM-6000
Year: 2013
New - 2013, Serial No. 2012339, Bore diameter range.up to 6", Head travel (Z-Axis) servo feed.25", Spindle nose to table - maximum.29", Able to process.2 parts/cycle, Indexing Table:, - Number of stations.10, - Diameter.34", Spindles:, - Number.6, - Speeds - infinitely variable.100 - 1,500 RPM, - Motor.7.5 HP, - ...more
Engis #SPM Series, 6-Spdl, 8-Pos Rotary Table, 0.060" - 1.5" Range, coolant filt, PLC Control, 2004
Category: Diamond Bore Sizing Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Engis
Model: SPM
Year: 2004
New - 2004, Serial No. 2004178, Dial Plate Diameter (Pneumatic Index).20", Number of Index Stations.10, Able to Process.1-2 Parts/Cycle, Single Column Design.8-Spindle Multi-Head, Head Travel (Z-Axis) Servo Feed.18", Column to Center of Table.13", Base to Top of Index Table.8", Index Table Through Hole - ...more
W & W Co. #0661 Vacuum Wax Injector, 30 psi, 240V, Auto-Clamp, Pressure Controller
Category: Die Casting Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: W&w Co
Model: 0661
Serial No. 941385, Digital Incontrol Vacuum Wax Injector:, - Air Pressure - Maximum.30 psi, - Vacuum Requirement.27 Hg or higher, - Wax Capacity.6 Lbs., - Dimensions - Approximate.22.5"L x 14.5"W x 16.5"H, - Weight - Approximate.55 Lbs., - Electrics.240V/1Ph/50/60Hz/5A, Digital Techtrol Pro Auto-Clamp & Model 0631 ...more
Accu-Finish #Series-II, tool sharpening system, 1" drill capacity, slotted gun drill table, microscope
Category: Drill Sharpeners
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Accu-Finish
Model: SERIES-II
"Accu Finish Series 2 is designed to provide accurate angles and superior finishes on virtually all tool materials. As the name implies, it is not for rough shaping where large amounts of tool material must be removed. This is best done on a high speed bench grinder or similar machine. Tool finishing or resharpening ...more
Dust Collectors
2 Results
880 cfm LOSMA #Darwin-1200, Guard 20A Pre Filter,, 2.3HP, 5.9" Inlet, 76 dBa, 2013
Category: Dust Collectors
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Losma
Model: DARWIN-1200
Year: 2013
From LOSMA literature: "The Darwin range is a centrifugal extractor line for purifying air containing oil mists, micro-mists and fumes from cutting fluids (emulsions or neat oil). The Darwin range uses a combination of two filtration types: dynamic (provided by the centrifuge rotation) and static (with integrated ...more
3000 cfm Donaldson Torit #VS-3000, 354 sq.ft., 7.5 HP, cartridge type, 10" inlet, dust drawer, leveling pads
Category: Dust Collectors
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Donaldson Toirt
Model: VS-3000
Serial No. IG386215, Nominal Airflow.3000 cfm, Filter Area.354 ft², Filter Type.Cartridge, Dust Drawer Volume.3.6 ft², Inlet.10", Motor.7.5 HP, Sound Level.83 dB(A), Electrics.208-460V/3Ph/60Hz, Dimensions - Approximate.52"L x 40"W x 125"H, Weight - Approximate.1,850 Lbs., Vibra-Shake Automatic Filter ...more
14" x 40" Enterprise #EL-2, engine lathe, 1.5" bore, 8" 3-Jaw chuck, inch/metric threading, 45-2000 RPM
Category: Engine Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Enterprise
Model: EL-2
Serial No. 1731, Swing Over Bed.14", Swing Over Cross Slide.9", Distance Between Centers.40", Bore Diameter.1.5", Spindle:, - # of Speed Ranges.2 (Hi & Low), - # of Speeds.16, - Speeds.45 - 2000 RPM, Chuck Size.8", Electrics.220V/3Ph/60Hz, Dimensions - Approximate.79"L x 30"W x 50"H, Weight - Approximate.3000 ...more
15.5" x 54" LeBlond Makino #Regal-Servo-Shift-15C, 3-jaw 8" chuck, steady rest, tailstock, 1991
Category: Engine Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Leblond
Model: REGAL-SERVO-SHIFT-15C
Year: 1991
Year Built - 1991, Serial No. 15C-728, Swing Over Bed Carriage and Wings.15-1/2", Swing Over Cross Slide.9-1/2", Distance Between Centers.54", Through Hole Spindle Size.2-1/4", Spindle Nose.D6 Camlock, Number of Spindle Speeds.12, Spindle Speed.45-1800 Selectable, Spindle Motor.5 HP, Approximate Weight.4,000 Lbs ...more
Rofin #Easy-Jewel, Vanadate, 1064 nm, 20 width, in plant 22, 2007 (2 available)
Category: Engraving Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Rofin
Model: EASY-JEWEL
Year: 2007
Equipment No. 50011891, Year Built - 2007, Medium.Vanadate, Wavelength.1064 nm, Laser Power.20 W, Working Chamber:, - Marking Area - Maximum (160 mm Objective).4.72" x 4.72" (120 mm x 120 mm), - Marking Area - Maximum (254 mm Objective).7.08" x 7.08" (180 mm x 180 mm), Part Size - Maximum.11.81" x 7.87" x 4.72" (300 ...more
25" width x 15" D x 15" H Thermotron #ATS-320-DD-10-705, Hot to 200°, Cold to -73°C, 1999
Category: Environmental Chambers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Thermotron
Model: ATS-320-DD-10-705
Year: 1999
Thermotron thermal shock chamber Double Duty model ATS-320-DD has a cold zone positioned between two hot zones, aligned vertically top and bottom. Products under test are placed in one of two product carriers and transferred between the zones producing severe thermal stress. At least one product carrier always ...more
25" width x 15" D x 15" H Thermotron #ATS-320-V-10-705-LN2, Hot to 200°, Cold to -73°C, 1999
Category: Environmental Chambers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Thermotron
Model: ATS-320-V-10-705-LN2
Year: 1999
New - 1999, Serial No. 23727, Product Carrier Dimensions.25"W x 15"D x 15"H, Temperature Range:, - Hot Chamber.+60°C to +200°C, - Cold Chamber.-73°C to +177°C, Performance To:, - MIL-STD 883 1010.7 Test Load (-65C to 150C): 30 lbs, - MIL-STD 202, Method 107G and Many Other Automotive and Electronic ...more
37" width x 37" D x 37" H Thermotron #SM-32C, 42 cu.ft., -94 to 356°, 20% - 95% Humidity, 2007
Category: Environmental Chambers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Thermotron
Model: SM-32C
Year: 2007
Year Built - 2007, Serial Number: 881/26860RF, Volume.42 Cubic Feet, Compressor Sizes.Dual Cascade 2HP, Temperature Range.-94 to 356 F (-70 to 180 C), Temperature Control Tolerance.+/- 0.3C, Humidity Range.20% to 95%, Interior Dimensions (W x D x H).37" x 37" x 37", Overall Dimensions - Approximate.63"L x 63"W x 98"H ...more
40" width x 39" D x 46" H Thermotron #SE-1200-5-5-S, temp & humidity, -70° to 180°, 2000
Category: Environmental Chambers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Thermotron
Model: SE-1200-5-5-S
Year: 2000
New - 2000, Serial No. 30881, CATALOG :, Volume.42 Cubic Feet, Interior Dimensions.40"W X 39"D X 46"H, Temperature Range.-70 to +180 Celcius, Humidity Range.10% to 95% Relative Humidity, Power Requirements: 460V, 60Hz, 3PH, 23A, Machine dimensions - approximate.56"W x 84"D x 100"H, Thermotron 7800 programmable ...more
44" width x 37" D x 44" H Thermotron #FM-64-SS-5, Temp & Humidity, 10° C - 90° C, 2019
Category: Environmental Chambers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Thermotron
Model: FM-64-SS-5
Year: 2019
New - 2019, Serial No. 49662, Temperature range.10°C - 90°C, Humidity range.20% to 95%, Interior dimensions.44"(L-R) x 37"(F-B) x 44"(H), Electrics.208V/60Hz/3Ph, Weight - approximate.5,000 lbs, Dimensions - approximate.63"(L-R) x 78"(F-B) x 102"(H), *Preliminary pending confirmation.
Lincoln #Torchmate-5100, 60" x 120", 5-Axis, Spirit II 400 AGC, water table, 2021
Category: Flame Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Lincoln
Model: TORCHMATE-5100
Year: 2021
New - 2021, Hours - approximate: 1,500, Cutting Area.60" x 120", Traverse Speed.1,500 IPM, Cut Speed.Up to 450 IPM, Plate Capacity.Holds up to 4" 5' x 10' Mild Steel Sheet, Cutting Capacity - Production:, - Mild Steel.2", - Stainless Steel.1.5", - Aluminum.1.5", Mild Steel No Dross Edge Start Maximum ...more
Flange and Web Punch Machines
1 Result
8 Ton, Rotex #18, 1/8" to 2-1/4" cap., 18" throat, 18 station, hand actuated, tooling & spare parts
Category: Flange and Web Punch Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Rotex
Model: 18
, Throat Depth.18", Punch Range.1/8" - 2-1/4", Punch Sizes.1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2", Capacity.8 Tons, Tooled Stations.18, Actuation.Hand Actuated, Dimensions - Approximate.37"L x 30"W x 58"H, Weight - Approximate.530 Lbs ...more
Forklifts
1 Result
4000 lb. Toyota #7FGCU20, LPG, 7.6'to fork face, 24" load center, 6.3'turning radius, 118 FPM
Category: Forklifts
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Toyota
Model: 7FGCU20
Serial No. 66709, Load Capacity.4000 Lbs, Lift Speed.118 fpm, Load Center.24", Length to Fork Face.7.6', Overall Width.3.5', Overall Height - Mast Lowered.6.73', Right Angle Stack.7.71', Turning Radius.6.3', Engine Power.53 HP @ 2400 RPM, Fuel Type.LPG, Speed - Maximum.10.6 mph, Tire Type.Cushion ...more
Glebar #FW-9D, 1" Dia x 5" L Capacity, Accuracy 25m, 9" Wheel, Plunge Grinding, 2007
Category: Form Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Glebar
Model: FW-9D
Year: 2007
The FW-9D offers a unique version of plunge grinding where the outside shape of the product is ground relative to the center of the part. By using a motorized plate with arbors installed on its circumference as a holding fixture, parts can be loaded onto the precision arbors manually, or by using robots. The plate ...more
Gap Frame Single Crank Press Machines
1 Result
88 Ton, Amada #TPL-80SI, 5" stroke, 17.9"Shut Height, 40" x 23" x 5.3"bolster, wet clutch, Link drive, 2000
Category: Gap Frame Single Crank Press Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Amada
Model: TPL-80SI
Year: 2000
Year Built - 2000, Pressing Capacity.88 Tons, Stroke.5.1", Shut Height.17.9", Speed.50 - 95 SPM, Bolster Area.40.5" x 23.6", Bolster Thickness.5.3", Slide Area.21.7" x 17.7", Slide Adjustment.3.2", Main Motor.10 HP, Electrics.480V/3Ph/60Hz, Link Drive, Operator T-Stand w/Palm Buttons, Air Counterbalance, Wet Type ...more
Granulators
1 Result
6" x 8" MPE #600-Series, 3-Hi Gran-U-Lizer 666 " F", (3) 6" x 8" Rolls, 4 - 270 US Mesh, 2014
Category: Granulators
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mpe
Model: 600-SERIES
Year: 2014
New - 2014, Job No. 10521, Roll size.6" x 8", Grinding Sections:, - Quantity.3, - Orientation.Stacked, Roll Gaps:, - First.F2383 Gap range, - Second.F2384 Gap range, - Third.F2385 Gap range, - Accuracy.+/- 0.001", - Target range.4 - 270 US Mesh (4,700 - 50 Microns), Main drive motor.5 HP (208/230/460) Currently ...more
Grinding Fixtures/Attachments
1 Result
Norton #110C, Grit Diamond (SMD) Wheel, NIB, 9A1A 18 X 10 X 8, (5 available), #47378
Category: Grinding Fixtures/Attachments
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Norton
The SMD is an armored diamond which is usually used for carbide and steel, applications in a 50/50 ratio. The 110 grit is on the course end of the, spectrum for a super abrasive and should give a finish of around 32RA. This, wheel has an R grade resin. This wheel was purchased with a machine and is, still in it's ...more
Gun and Deep Hole Drilling Machines
1 Result
3/4" x 15" Eldorado #M75-1032, 3HP, 1445-11740 RPM, 26" L x 20" W Fixture Area, 2003
Category: Gun and Deep Hole Drilling Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Eldorado
Model: M75-1032
Year: 2003
New - 2003, Serial No. 2009, Capacity.3/4" Diameter x 15" Stroke, Gundrilling Diameter Capacity.0.053" - 0.750" Diameter, Ball Screw Stroke Length - Maximum.15", Spindle Speeds (18).1,445 - 11,740 RPM, Spindle Motor.3 HP, Ball Screw Feed Rate.0.1 - 99.9 IPM, Jog Rate.200 IPM, Coolant Reservoir Capacity.90 Gallons ...more
Sunnen #CGT, Style Tooling, diamond coated, .218" to .4411" range, new, #40780 (49 available)
Category: Horizontal Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Sunnen
Model: CGT
- Plated Diamond Abrasive for Long Life, - The CGT Family of Tools Covers the Range of.185 to 1.260" (5.46 to 32 mm), - Larger than 1.260" (32 mm) and Smaller than.215" (5.46 mm) are Available, TOOLING AVAILABLE - Lot 1:, Quantity (2) - New in Box - CGT7-221-D5 - 5.54- 5.66 mm, Quantity (2) - New in Bag - CGT10-360-D5 ...more
Sunnen #KGM-5000E, Kross-Grinding, 0.153" - 1.260" capacity, 0.31" - 6" length capacity, power stroke, 2002
Category: Horizontal Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Sunnen
Model: KGM-5000E
Year: 2002
Serial No. 3A1-1015, Year - 2002, Diameter Range - (I.D.).0.153" - 1.260" (3.89 - 32 mm), Workpiece Length Range.0.31" - 6" (8 - 150 mm), Workpiece Weight - Maximum.4.5 Lbs. (2.0 Kg), Spindle Speed - Variable.257 - 3700 RPM, Stroke Rate - Variable.33 - 500 SPM, Pump Motor - Coolant.1/4 HP, Pump Flow Rate - Coolant.1.5 ...more
Sunnen #MBC-1800, 0.060"-6.5", 16" stroke, power stroking, automatic cycling, stone saver, 1985
Category: Horizontal Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Sunnen
Model: MBC-1800
Year: 1985
Year Built - 1985, Serial No. 80744, I.D. Range:, - For Auto Stroking.1/8" - 2", - For Power Stroking.0.060" - 3.75", - For Manual Stroking.0.060" - 6.5", Length Range:, - Open Bores using Auto Sizing.10", - Open or Blind Bores using Power Stroking.16", Spindle Speeds (12).200, 250, 320, 400, 500, 640, 800, 1000 ...more
Hydraulic Straightening Presses
1 Result
100 Ton, Eitel #RP100, 8" Stroke, 38" DLO, 7/8" Adj. Stroke, WR Shaft Attachment, 1980
Category: Hydraulic Straightening Presses
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Eitel
Model: RP100
Year: 1980
New - 1980, Serial No. 25238, Capacity.110 Tons (100 Tons Metric), Stroke - Maximum.8", Straightening Stroke - Adjustable & Controllable.7/8", Daylight.38" Over Bed, Depth of Throat.13-3/4", Main Bed Area.29" L-R x 19-3/4" F-B, Straightening Bed Area.55" L-R x 10-1/2" F-B, Distance Bed to Floor.20", Speeds:, - ...more
ADF #Dunker, dunk washer, 304 Stainless Steel, 28" x 28" x 18", 2000 lb. part capacity, agitation, heat, 2005 (2 available)
Category: Immersion Parts Washers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Adf
Model: DUNKER
Year: 2005
New - 2005, Serial No. 503-4798, Platform Size.28"L x 28"W, Load Size - Maximum.28"L x 28"W x 18"H, Immersion Depth.18", Stroke.3", Strokes/Min.60 - 80, Tank Heater.15 KW, Service Connection:, - Air Inlet.1/4", - Overflow.1", - Drain.2", - Insulated.2", Lift Capacity.200 Lbs., Liquid Capacity.160 Gal., Filter ...more
Initial and Double Pinch Plate Bending Rolls
1 Result
10' x 2-1/3" Faccin-Biko 33158,3-Roll, 22.8" upper roll, hydraulic drop end & roll adj, 75HP, 2014
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Year: 2014
New - 2014, Rated Bending Capacity…………2.36” x 10’, Pre Bend:, - At 5x Top Roll Diameter…………1.96” x 10’, - At 1.3x Top Roll Diameter…………1.57” x 10’, Diameter of Rolls:, - Top ...more
5-29/32" x 43-1/32" MECO #Mec-150, Servo, 47-1/4' stroke, 59" diameter Index Table, 5,500 lb capacity, MECO CNC, 7 HP, 2012
Category: Keyseaters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Meco
Model: MEC-150
Year: 2012
New - 2012, Serial No. 290, Stroke Adjustable Rod.0 - 47.24", Keyway Capacity:, - Width.0.12" - 5.91", - Length.Up To 43.31", Work Table - Indexing:, - Diameter - Maximum.59.05", - Indexing.1 Deg., Workpiece Capacity:, - Size.55" x 43"H, - Weight.5,500 Lbs., Work Speed.29.53 ft/s, Table Depth Range.23.62", Main ...more
Lappers Lapping Machines
1 Result
20" Lapmaster #20, serrated cast iron plate, slurry distribution system, rings & weights, 1 HP
Category: Lappers Lapping Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Lapmaster
Model: 20
Serial No. 23147, Plate:, - OD.20", - ID.5", - Speed.70 RPM, Rings:, - OD.9", - ID.7.5", # of Ring Positions.3, Motor.1 HP, Electrics.120V/1Ph/60Hz, Dimensions - Approximate.35"L x 40"W x 55"H, Weight - Approximate.600 Lbs, Slurry Distribution System, Cabinet Stand, (3) Conditioning Rings, (3) Pressure Plates ...more
Laser Welding Machines
1 Result
Trumpf #TruLaser-Cell-3000, compact, high precision 5-Axis laser, 9000 watt, 31.49" X, 23.62" Y, 15.74" Z, 2020
Category: Laser Welding Machines
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Trumpf
Model: TRULASER-CELL-3000
Year: 2020
"With the compact and high-precision 5-axis laser machine Trumpf TruLaser Cell 3000 you can weld and cut in two or three dimensions. In addition, the 3D laser machine is also ideal for laser metal deposition (LMD). From prototypes to large-scale series production with extensive automation, this multi-talented machine ...more
Miscellaneous Mixers and Blenders
1 Result
Bellaform #BSW-135, High Shear, Continuous, Roller type, Up to 110 Lbs./Hr.
Category: Miscellaneous Mixers and Blenders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Bellaform
Model: BSW-135
Year: 2014
High shear mixers like the Bellaform BSW-135 are an excellent option for high-purity, contamination-free, continuous processing of medium to high viscosity feedstocks. They are the best constantly functioning open design process for melting, homogenizing, dispersing, compressing, and granulating. High shear mixers are ...more
Precision and Second Operation Lathes
5 Results
11" x 18" Feeler #FTL-618E, 6-1/2" swing over cross slide, inch threading, 1.25" bore, 5" chuck, 5C collets, 2004
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Feeler
Model: FTL-618E
Year: 2004
Year Built - 2004, Serial No. 8E109, Swing Over Bed.11", Swing Over Cross Slide.6-1/2", Swing Over Carriage.9", Distance Between Centers.18", Hole Thru Spindle.1-1/4", Compound Slide Travel.3", Carriage Power Feed Range - Variable.5/16" - 7 IPM, Cross Slide Power Feed Range - Variable.3/16" - 4 IPM, Spindle Speed - ...more
11" x 18" Hardinge #HLV-H, precision lathe, inch thread, taper, 5C collet, compound cross, 1993
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hardinge
Model: HLV-H
Year: 1993
Serial No. HLV-H-11377T, Year Built – 1993, Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment. Built-in coolant system. Hardened ...more
11" x 18" Hardinge #HLV-H, inch thread, 5C collet, compound cross, AcuRite digital read out system, 1990
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hardinge
Model: HLV-H
Year: 1990
Serial No. HLVH-8676T, New - 1990, Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment. Built-in coolant system. Hardened and ground dovetail ...more
11" x 18" Vectrax #CTL-618EVS, 6" swing over cross slide, inch/metric, 5C collet, 6" chuck, 1.5" bore, 3 HP, 2019
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Vectrax
Model: CTL-618EVS
Year: 2019
Year Built - 2019, Serial No. 108111609, Swing:, - Over Bed.11", - Over Cross Slide.6", Width of Bed.6.75", Distance Between Centers.18", Cross Slide Travel.6", Top Slide Travel.3', Spindle:, - Bore.1.5", - Speeds.Infinitely Variable, - Speed Range.0 - 4000 RPM, Longitudinal Feed.5/16" - 7" ipm, Cross Feed.5/16" - ...more
11" x 18" Victor #618EM, inch/metric, 3000 RPM, 5C, 5" chuck, Aloris Post, 2002
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Victor
Model: 618EM
Year: 2002
New - 2002, Serial No. 9007497, Spindle Capacity 5C Collets - Round.1-1/16", Spindle Capacity 5C Collets - Hex.7/8", Step Chucks.1-1/16" to 6", Variable Spindle Speed.130 - 3,000 RPM, Swing Over Bed.11", Swing Over Cross Slide.6", Swing Over Carriage.9", Distance Between Centers.18", Hole thru Spindle.1-1/4", Compound ...more
Ram (Die Sinker) EDM
1 Result
Makino #EDGE3I, Hyper-i CNC Control, 23.6" x 17.7" table, 17.7" X, 11.8" Y, 12.6" Z, 8 ATC, 2019
Category: Ram (Die Sinker) EDM
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Makino
Model: EDGE3I
Year: 2019
"The advanced technologies and intelligent design of the EDGEi-Series machines deliver an unparalleled value, capability, and reliable productivity to Sinker EDM operations. The EDGE3i machine provides open and unrestricted access for the operator to the work zone with a 4-sided programmable rise and fall work tank ...more
Reciprocating Surface Grinders - Horizontal Spindle
4 Results
6" x 12" Mitsui #MSG-200MH, hand feed, perm-mag chuck, lube system, 1984
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mitsui
Model: MSG-200MH
Year: 1984
New - 1984, Serial No. 84045073, Work Surface of Table.6" x 12", Max. Longitudinal Table Travel.18", Max. Cross Table Travel.8", Max. Height from Centerline Spindle to Table Top.18", Max. Grinding Length & Width.19-3/4 x 7", Table Movement per Head Wheel Revolution.4"/Rev., Hand Wheel Vertical Feed ...more
12" x 24" Chevalier #FSG-3A1224, 14" x 2" wheel, 5 HP, ElectroMagnetic chuck, 3-Axis automatic, Fagor digital read out, 2016
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Chevalier
Model: FSG-3A1224
Year: 2016
New - 2016, Serial No. FP3142001, Grinding Capacity:, - Length - Maximum.24", - Width - Maximum.12", Table Travels:, - Longitudinal - Maximum.27.5", - Crossfeed - Maximum.14.5", Table Feed Speeds, - Longitudinal.Manual or 16-82 FPM, - Crossfeed (Intermittent).Manual or 0.04" to 0.6", Chuck Size.12" x 24", Distance ...more
15.7" x 23.6" Amada #Techster-64, Fanuc 32i-B Control, electromagnetic chuck, 14" x 2" wheel, 5 HP, coolant, chiller, enclosure, 2013
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Amada
Model: TECHSTER-64
Year: 2013
Column — The unique, isolated three-way sliding column on the Techster 64 and 64S was optimized through structural analysis to deliver maximum performance while requiring minimal floor space., Table — The ball screw drive and no-overhang V-V sliding surface deliver high-precision operation in both high- ...more
17.7" x 33.4" Okamoto #ACC84DX, 355mm wheel, 5 HP, automatic feeds, over wheel dresser, 2016
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Okamoto
Model: ACC84DX
Year: 2016
Serial No. 69292, Year Built - 2016, Table:, - Working Capacity.850 x 400 mm, - Distance from Table Top to Wheel Underside (355 mm Wheel).22.5 - 522.5 mm, - Load Capacity.1540 Lbs, - Chuck Dimensions (L x W x H).800 x 400 x 85 mm, - T-Slots (Width x No.).17mm x 3, Longitudinal Feed:, - Travel - Maximum.950 mm, - Feed ...more
9.06" Matsumoto #MDB-200, with TH-200 tailstock, 2" thru hole, 7.25" center height, dead center
Category: Rotary Tables
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Matsumoto
Model: MDB-200
Serial No. 86252, Table Diameter.9.06", Center Height.7-1/4", Thru-Hole Diameter.2", Speed - Maximum.5.50 RPM, Number of T-Slots.8, T-Slot Width.0.47", Guide Slot Widht.0.71", Weight - Approximate.300 Lbs, Dimensions - Approximate.35"L x 25"W x 28"H, Matsumoto model TH-200 Tailstock (Serial No. 87809), Dead Center ...more
Timesavers #10-Series, 51" x 31" table, 10.2" x 12.25" vacuum, 5.9" disc, 1 HP, 2022
Category: Slag Grinders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Timesavers
Model: 10-SERIES
Year: 2022
"The 10 series" is Timesavers’ versatile starter model slag removal machine and the cost saving alternative for manual deburring, edge rounding and/or finishing of metal. This versatile machine has two heads, an easy to change grinding pad and a brush. The different kind of brushes can take care of deburring ...more
Sliding & Gap Bed Lathes
2 Results
22"/31" x 120" Acra #22120, 19.5" 4-Jaw Chuck, 4" Bore, 2-Ax digital read out, Splash Guard, 2007
Category: Sliding & Gap Bed Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Acra
Model: 22120
Year: 2007
Serial No. CH08824, Year Built - 2007, CATALOG :, Swing:, - Over bed.22", - Over cross slide.13-3/8", - In gap.31-3/8", Distance between centers.120", Bed width.15-3/4", Gap width.10-5/8", Spindle:, - Nose.D1-11, - Bore.4-1/8", - Taper.MT No. 7, - Speeds(12) - Hi & Lo Range.13 - 1,200 RPM, - Drive motor.15 HP ...more
22"/31" x 120" Tarnow #TUJ50M, 3-Jaw Chuck, Steady Rest, (18)20-1600 RPM, 3.5" Bore, 1990
Category: Sliding & Gap Bed Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Tarnow
Model: TUJ50M
Year: 1990
, Capacity:, - Swing over bed.22", - Swing in removable gap.31-1/2", - Swing over carriage.14-1/2", - Available distance between centers.120", Headstock:, - 18 spindle speeds.20-1,600 RPM, - Main drive motor - 7 belt drive.15 HP, - Spindle bore.3-1/2" (D1-11 camlock), - Headstock length bearing on bed.27", - Width of ...more
Small Hole EDM Drilling Machine
1 Result
Agie Charmilles #Drill-20, 11.8" x 15.7" table, 11.8" X, 7.8" Y, 11.8" Z, 7.78" drilling depth, 2012
Category: Small Hole EDM Drilling Machine
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Agie Charmilles
Model: DRILL-20
Year: 2012
New - 2012, Electrode Diameter.0.004 - 0.12", Maximum Drilling Depth.7.78", Maximum Workpiece Weight.660 lbs., Travel Paths:, X-Axis.11.8", Y-Axis.7.8", Z-Axis.11.8", Work Table Size:, Length.11.8", Width.15.7", Travel Path of the Electrode Guide.3.9", Heavy Duty Generator.30 Amps, Dielectric Volume.4.2 Gal ...more
9" Hardinge #HSL59, 3-Speed, 750 - 1800 - 3000 RPM, 9" Sw, 10" Bed, S/N HSL-5C-6805-T
Category: Speed Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hardinge
Model: HSL59
Year: 1994
Serial No. HSL-5C-6805-T, Year Built - 1994, Spindle Capacity:, - Round 5C collets.1-1/16", - Hexagon 5C collets.7/8", - Square 5C collets.3/4", - Step Chucks.6", Spindle Speeds (3).750, 1800, 3000 RPM, Swing Over Bed.9", Length of Bed from Face of Spindle.10", Electrics.230 V, 3 Ph, 60 Cycle, Hardinge Model E Cross ...more
Miller #Syncrowave-350 CC AC/DC, Tig, Stick, Bernard Chiller, Foot Pedal, 350 amp.
Category: Tig Welders
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Miller
Model: SYNCROWAVE-350
Serial No. - JJ491637, Rated Welding Amperes:, - NEMA Class I - 350 @ 34 Volts, 40% Duty Cycle, 29.9 KVA, - NEMA Class I - 300 @ 32 Volts, 60% Cycle, 26.2 KVA, Welding Range - Amperes.3 - 385, Open Circuit Voltage - Maximum.80, Electrics.200V/230V/1Ph/60Hz, Dimensions - Catalog.32" (L-R) x 24" (F-B) x 44" (H), Weight ...more
Proceco #Typhoon-HD-100, 6000 lb. capacity, gas, sludge conveyor, swing out turntable, exhaust blower, 1999
Category: Turntable Parts Washers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Proceco
Model: TYPHOON-HD-100
Year: 1999
New - 1999, Serial No. 99-209, Work height.48", Turntable:, - Diameter.100", - Capacity.6,000 Lbs., Tank Volume:, - 1.2,000 Gals., - 2.545 Gals., First Stage - Wash System:, - Nozzles:, - Quantity.31, - Spray pattern.Flat-V, - Delivery rate.7.0 GPM, - Pump.100 HP, Second Stage - Rinse System:, - Nozzles:, - ...more
Universal Cylindrical Grinding Machines
4 Results
10" x 40" Kellenberger #1000U-125, 3-Wheel Design, ID Spindle, Coolant System, 1989
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Kellenberger
Model: 1000U-125
Year: 1990
New - 1990, Serial No. 32.467.2911, Distance Between Centers.39-3/8", Distance Between Centers w/ Tailstock Overhanging.47-1/4", Height of Centers.4.96", Swing Over Table.10", Longitudinal Table Travel.51-13/16", Longitudinal Table Travel Per Turn of Handwheel - Coarse.25/32", Longitudinal Table Travel per Turn of ...more
11.8" x 25.6" Jones & Shipman #Suprema-650-Easy-M, 3-wheel design, Marposs P3 SE gaging, 2016
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Jones & Shipman
Model: SUPREMA-650-EASY-M
Year: 2016
New - 2016, Capacities:, - Grinding length.25.6", - Swing.11.8", - Weight between centers - maximum.220 Lbs., Table:, - Traverse distance.29.5", - Traverse speed - stepless.0.000004 - 472 IPM, - Swivel.+9°/-9°, - Electronic handwheel increment.0.00004"/0.0004"/0.004", Traverse Control & Feedback - Fanuc ...more
16" x 40" Kellenberger #1000U, 3-wheel design with ID spindle, micro correction, 2-Axis digital read out, 2002
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Kellenberger
Model: 1000U
Year: 2002
New - 2002, Serial No. 613952, Height of Centers.7.96", Table Slide:, - Distance Between Centers.39-3/8", - Travel - Maximum.51-3/16", - Traverse Per Revolution of Handwheel (Coarse/Fine).0.7876" / 0.0967", - Traverse per Division of Dial.0.002", - Traverse Speed - Hydraulic - Infinitely Variable.0 - 19 ft/min, - ...more
16" x 40" Kellenberger #1000U-125, 3-wheel design, ID spindle, coolant system, 1990
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Kellenberger
Model: 1000U-125
Year: 1990
Serial No. 32462-2429, Year Built - 1990, Distance Between Centers.39-3/8", Distance Between Centers w/ Tailstock Overhanging.47-1/4", Height of Centers.7.96" w/3" Risers, Riser Height.3", Swing Over Table w/Risers.16", Longitudinal Table Travel.51-13/16", Longitudinal Table Travel Per Turn of Handwheel - ...more
26" width x 26" H x 26" D T-M Vacuum Products #PC-26.2, 23.2 cfm, 350°F, 2004
Category: Vacuum Ovens
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: T-M Vacuum
Model: PC-26.2
Year: 2004
New - 2004, Serial No. 04.12951204.1, Chamber Size.26"W x 26"D x 26"H, Temperature (Continous) - Maximum.350°F, Time to Max. Temperature.25 Mins under vacuum (35 mins in atmosphere), Vacuum Pumping System.23.2 cfm two-stage rotary vane mechanical pump package with electro-pneumatic valve, Vacuum Range - Standard ...more
Vertical Band Saws
1 Result
16" x 12" DoAll #1612-0, vertical bandsaw, 3/4" blade, variable speed, blade weld/grind, 1968
Category: Vertical Band Saws
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Doall
Model: 1612-0
Year: 1968
Year Built - 1968, Serial No. 277-68215, Throat Size.16", Work Height - Maximum.12", Infinitely Variable Band Speeds - (2) Ranges.50-300 and 850-5,200 FPM, Band Width Range.1/16" - 3/4", Band Length.122", File Length.120", Table Size.24" x 24", Table Tilt, Manual:, - Right.45 Degrees, - Left.10 Degrees, Weight - ...more
Vertical CNC Machining Centers
5 Results
Fadal #VMC4020HT, 40" X, 20" Y, 20" Z, 10000 RPM, 21 automatic tool changer, 48" x20" table, 22.5 HP, Cat 40, 2004
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Fadal
Model: VMC4020HT
Year: 2004
Year Built - 2004, Machine On Time - 3,308 Hours, Machine Run Time - 539 Hours, Table:, - Size.48" x 20", - Load Capacity - Maximum.3,966 Lbs., - T-Slots.5 x 0.70" x 3.75", - Floor to Table Surface.30.98", Travels:, - X-Axis.40", - Y-Axis.20", - Z-Axis.20", Cutting Feed Rate (X/Y/Z).0.0098 - 400 ipm (600 ipm at 150%) ...more
Haas #VM-3, 40" X, 26" Y, 25" Z, 12000 RPM, 30 HP, 54" x 24" table, 24+1 side mount tool changer, Cat 40, 2008
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Haas
Model: VM-3
Year: 2008
Year Built - 2008, Serial No. 1067386, Travels:, - X-Axis.40", - Y-Axis.26", - Z-Axis.25", - Spindle Nose to Table Range.4.2" - 29.2", Table:, - Size.54"L x 25"W, - Weight on Table - Maximum.4000 Lbs, - T-Slot Width.0.626" - 0.630", - T-Slot Quantity.13 in Y and 6 in X, Spindle:, - Motor.30 HP, - Speed - ...more
Litz Hitech Mitsubishi #DM-800G, 31.5" X, 19.7'Y, 21.3" Z, 24 automatic tool changer, 20000 RPM, Graphite machining package, 2015
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Litz Hitech Mitsubishi
Model: DM-800G
Year: 2015
Year Built - 2015, Serial No. 61MM00075, Travels:, - X-Axis.31.5", - Y-Axis.19.7", - Z-Axis….21.3", Spindle Speed….20,000, Tool Weight - Maximum….11 Lbs, Cutting feedrate….0.04 – 787 in/min, Table:, - Size….35.8 x 19.6, - Weight Cap….1100 Lbs, - Table to Spindle Nose ...more
Mag, Fadal #VMC6030HT, 60" X, 30" Y, 30" Z, 10000 RPM, 24 automatic tool changer, 22.5 HP, 62.5" x30" table, Cat 40, 2008
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mag
Model: VMC6030HT
Year: 2008
Year Built - 2008, Machine On Time - 1,740 Hours, Machine Run Time - 238 Hours, Table:, - Size.62.5" x 30", - Capacity.4,120 Lbs., - T-Slots.5 x 0.709" x 3.75", Floor to Table Surface.36", Spindle Nose to Table.5.5" - 35.5", Travels:, - X.60", - Y.30", - Z.30", Cutting Feed Rate (X/Y/Z).0 - 400 ipm, Rapid Traverse ...more
OKK #VP-400, CNC vertical machining center, 20 automatic tool changer, 23" X, 16" Y, 18" Z, 12000 RPM, 10 HP, Dual-Platter Trunnion, 2010, (2 available)
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Okk
Model: VP-400
Year: 2010
OKK VP400 Vertical Machnining Center, New - 2010, Serial No. 355, Travels:, - X-Axis.23.62", - Y-Axis.16.14", - Z-Axis.18.11", Table:, - Distance from Surface to Spindle Nose.5.91" - 24.02", - Work Surface Area.35.43" x 16.14", - Workpiece Weight - Maximum.1,100 Lbs., Spindle:, - Speed - Infinitely Variable.100 - ...more
Sunnen #CK-21, 12" stroke, 3/4"-8" dia., 4 HP, automatic feed, 1500 lb part capacity, 1998, retrofit 2007
Category: Vertical Hones
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Sunnen
Model: CK-21
Year: 1998
New - 1998, Retrofit - 2007, Serial No. 4V1-1087, Diameter Range.0.75" - 8", Stroke Length.0.75" - 12", Table size.12" x 40", Max Part Weight.1500 lbs, Spindle Speeds.90 - 550 RPM, Stroke Rate.40 - 100 SPM, Spindle Horsepower.4 HP, Coolant Capacity (Oil).65 Gallon, Electrics.230V/3Ph/60Hz, Dimensions - actual.81"(L-R) ...more
8 KIP LDS Bruel & Kjaer #V875-440T, 40kVa Amp, w/Thermotron Temp & Humidity Chamber, 2000
Category: Vibration Testers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Lds
Year: 2000
New - 2000, Force Rating:, - Random.8,000 lbf (35,585 N) peak, - Sine.8,000 lbf (35,585 N) RMS, - Shock.24,000 lbf (106,752 N), Stroke - standard.2" Peak to Peak, Frequency Range - Hz.DC to 2,400 Hz Max, Armature:, - Mass.69.66 Lbs. (31.6 KG), - Diameter.440 mm, Acceleration:, - (Sine Peak): 110 g (1080 m/s^2), - ...more
13 KIP Unholtz-Dickie #T1000, w/Thermotron Temp & Humidity Chamber, 1996
Category: Vibration Testers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Unholtz-Dickie
Year: 1996
New - 1996, Force Rating:, - Random.12,000 Lbs. RMS Random, - Sine.12,000 Lbs., - Shock.24,000 Lbs., Stroke - standard.2" Peak to Peak, Frequency Range - maximum.5 - 2500 Hz, Armature:, - Mass.95 Lbs., - Diameter.17", Free table acceleration - maximum.100 g, Total Weight- approximate.8,000 Lbs., Overall Dimensions (W ...more
Water Treatment Equipment
2 Results
Omax #PSI-TWRS-400-PCM, central water recycling system, 6 GPM, HM digital PSC-150 Control, alarm, 2014
Category: Water Treatment Equipment
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: PSI-TWRS-400-PCM
Year: 2014
The OMAX® Water Recycling System reduces water consumption by up to 95% and prevents pulverized abrasive and heavy metals from entering regional sewers and drainage systems. The Water Recycling System addresses the four critical areas of water recycling: suspended solids, dissolved solids, temperature, and organic ...more
Omax #WJ-RO1200, water softening system, 600 gallon tank, 1200 GPD, 2014
Category: Water Treatment Equipment
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: WJ-RO1200
Year: 2014
New - 2014, Serial No. RO-9396, - Throughput.1,200 GPD, - Storage.600 Gals., Dimensions - actual.72" x 48" x 90"(H), *Preliminary, pending confirmation.
Omax #2626 Jet Machining center, 46" x 31" table, 26" X, 26" Y, 8" Z, 30 HP, 60000 psi, 2018
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: 2626
Year: 2018
New - 2018, Runtime - 11,258 Hours, CATALOG :, Table size.46" x 31", Cutting envelope.26" x 26", Material:, - Load - maximum.400 Lbs./Sq. Ft., - Support slats.4" x 1/8", Travels:, - X-Axis.26", - Y-Axis.26", - Z-Axis.8", Speed.180 IPM, Accuracy:, - Linear positional.+/-0.001", - Repeatability.+/-0.001", - Ballbar ...more
Omax #5555, Jetmachining center, 80" x 65" table, 55" X, 55" Y, 8" Z, 30 HP, 60000 psi, 2014
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: 5555
Year: 2014
New - 2014, Runtime - 5,508 Hours, CATALOG :, Table size.80" x 65", Cutting envelope.55" x 55", Material:, - Load - maximum.400 Lbs./Sq. Ft., - Support slats.4" x 1/8", Travels:, - X-Axis.55", - Y-Axis.55", - Z-Axis.8", Speed.180 IPM, Accuracy:, - Linear positional.+/-0.001", - Repeatability.+/-0.001", - Ballbar ...more
Omax #Enduromax-3060V, intensifier pump, 30 HP, 60000 psi, 0.67 GPM
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: ENDUROMAX-3060V
"The 4th Generation Omax EnduroMAX Pump is the industry leader in efficiency reliable direct drive pump technology. Designed for long life, the EnduroMAX Pump is capable of up to 1,000 hours between pump rebuilds, maximizing machine uptime. The simple yet robust design is specifically engineered to simplify ...more
Omax, bulk abrasive delivery system, 600 lb. hopper capacity, 90-125 psi, 10 hr cutting time
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
"The OMAX Bulk Abrasive Delivery System improves production times by automating garnet delivery to the nozzle. Available in multiple sizes, the Bulk Abrasive Delivery System uses pneumatic pressure to automatically transport garnet from an external bulk abrasive hopper to the cutting head hopper. The Bulk Abrasive ...more
Omax, Laminar filter, CLS, gravitational, sediment pump, sediment rake, splash diverter
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
"This settling tank efficiently cleans overflow water from the Catcher Tank for required recycling through a Closed Loop System (CLS) or for environmental disposal. When water enters the OMAX Laminar Filter, an ideal gravitational filtering process begins in the unit. The accessory contains angled plates that organize ...more
Omax, lot of waterjet parts
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Lot of OMAX Waterjet Parts, Pictures shown are just a sample of what's available. Call 847.276.2761 for Google drive link with all images., PART NUMBER | | QUANTITY AVAILABLE, 200020 | BALLSCREW SUPPORT, 200020 OMAX WBK15-01A NSK | 2 Available, 201639 | CABLE ASSEMBLY, 201639 OMAX DIN43650 USED F/ PRESSURE ...more
