
Johnston Machinery Corp
Contact
About
Johnston Machinery buys, sells, appraises and liquidates used metalworking machinery & industrial equipment, including: Press Brakes & Shears, Presses & Coil Equipment, Bending Rolls, Saws, Flame Cutters & Lasers, Beam Lines, Roll-formers, Boring Mills, Drills, Lathes, CNC Machining & Turning Centers, Blast Finishing SystemsProducts & Services
- Benders, Bar, Pipe, Tube
- Boring Mills, Horz. & Vert.
- Brakes, Press
- Machining Centers, CNC
- Presses
- Rollformers
- Saws
- Shears
Associations & Affiliations

36 listings in 23 categories
Annealing and Brazing and Sintering Furnaces
1 Result
Tenova LOI Thermprocess annealing furnace, 1"-5.5" tube outside dimension, 52.5' L, gas, 1796 Degrees F, 2015
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Year: 2015
Tenova LOI Thermprocess annealing furnace, 1"-5.5" tube outside dimension, 52.5' L, gas, 1796 deg F, 2015
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Annealing Lines (Annealers)
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Tenova
Year: 2015
Banding Lines and Coil Packaging Lines
1 Result
15000 lb. Pro-Eco, banding line, 80" OD, 1998
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Banding Lines and Coil Packaging Lines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Pro-Eco
Year: 1998
Blast Cleaning and Shot Peening Miscellaneous
1 Result
CM Surface Treatment (Italy) #ST/9-W, blast finish wire, bar & rod, 50mm capacity, low hours, 2013
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cm
Model: ST/9-W
Year: 2013
Booths, Paint and Powder
1 Result
NLOC Innovations, wet paint spray booth, 18' W x 10' H x 60' L, roll-up door, 4-fans, 2014
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Booths, Paint and Powder
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Nloc Innovations
Year: 2014
CNC Bar, Pipe and Tube Benders
1 Result
Schwarze Robitec 3.5" Schwarze-Robitec #CNC80HD (German), 0.299" wall thickness, 2013
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Bar, Pipe and Tube Benders
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Schwarze Robitec
Model: CNC80HD
Year: 2013
CNC Beam/Drill Lines
2 Results
Controlled Automation #DRL-348TC, 3-spdl, 48" W, 18" H, 2-1/4" hole, 65" infeed, 75" exit conveyor
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Beam/Drill Lines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Controlled Automation
Model: DRL-348TC
Ficep #1204DJTT, CNC drilling & thermal coping system, 3-head, 48" web, plasma cutting robot, 2014
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Beam/Drill Lines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Ficep
Model: 1204DJTT
Year: 2014
Bystronic #BySprint-Pro-3015, 4400 watt, 60" x 120" shuttle table, 2013
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Lasers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Bystronic
Model: BYSPRINT-PRO-3015
Year: 2013
Bystronic #ByStar-3015 Fiber Optic, 4000 watt, 60" x 120" shuttle table, 2012
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Lasers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Bystronic
Model: BYSTAR-3015
Year: 2012
Mitsubishi #ML4020NX, 4500 watt, 161.42" x 82.67" shuttle table, chiller, dust collector, 2012
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Lasers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Mitsubishi
Model: ML4020NX
Year: 2012
XT Laser #XTC-FM1309, fiber laser, 1000 watt, 1300mm x 900mm cutting area, 2019
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Lasers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Xt Laser
Model: XTC-FM1309
Year: 2019
CNC Plasma Cutting Systems (Flame Cutters)
2 Results
Arc Specialties #Cut-Pro-20, 6' x 24' cutting area, water table, 300 amp Hypertherm XPR-300, low hours, 2019
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Arc Specialties
Model: CUT-PRO-20
Year: 2019
Controlled Automation #Revolution plasma & oxy-fuel beam process line, 48" W, 7-Axis, Coping, CTL, 65"In-feed
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Controlled Automation
Model: REVOLUTION
110 Ton, Amada #RG-100, hydraulic, 10.2' OA, 100" between housing, Hurco Autobend 7 2-Axis Back Gauge, 1997
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Amada
Model: RG-100
Year: 1997
CNC Punch / Plasma Cutters
1 Result
40 Ton, Whitney #3400XP, 1/2" thick, 60" x40" trvls, Hypertherm HPR260, Siemens, 2013
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: CNC Punch / Plasma Cutters
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Whitney
Model: 3400XP
Year: 2013
75000 lb. Abbey Etna, 50' draw length, 200 HP
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Draw Benches
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Abbey Etna
Horizontal Band Saws
1 Result
25" x 44" Hem #WF190M-DC, twin column, semi-automatic, 2" blade width, 15 HP, 2000
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Horizontal Band Saws
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Hem
Model: WF190M-DC
Year: 2000
Hydraulic Hydroforming Press Machines
2 Results
705 Ton, APT #LPS-6300, hyd.deep draw & hydroforming press, 59.06" stroke, low hours, 2001
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Hydroforming Press Machines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Apt
Model: LPS-6300
Year: 2001
2750 Ton, Cincinnati #25-10-12 Hydroform, 25" blank, 19" punch, 12" draw, 10000 psi, 16" stroke, 32" daylight
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Hydroforming Press Machines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cincinnati
Model: 25-10-12
40 Ton, Wysong #H-4072, Hydra-mechanical, 6' overall, 12 gauge, Hurco AB5 Back Gauge, 1995
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Wysong
Model: H-4072
Year: 1995
160 Ton, Betenbender #8-160, hydraulic, 123" length, 78-1/2" between housing, 14" OH, 8" throat, light curtain, 2009
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Betenbender
Model: -8-160
Year: 2009
175 Ton, Accurpress #717510, 10' overall, 100" between housing, 8" stroke, 14" OH, ETS3000, 2000
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Accurpress
Model: 717510
Year: 2000
350 Ton, Haco Atlantic #HDE350-12, 12' overall, 126" between housing, 30 HP, ATL 550 control, 2006
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Haco
Model: HDE350-12
Year: 2006
400 Ton, Standard #AB400-12, 12' overall, 125" between housing, 20" open height, 10" stroke, 1999
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Standard
Model: AB400-12
Year: 1999
600 Ton, Pacific #K600-18, 18' overall, 194" between housing, 12" stroke, 22" OH, Automec CNC150 Back Gauge, 1991
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Pacific
Model: K600-18
Year: 1991
1500 Ton, Cincinnati #1500H, hydraulic, 32' overall, 336" between housing, 24" stroke, 36" OH, 1970
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cincinnati
Model: 1500H
Year: 1970
705.6 Ton, APT #LPS-6300, hyd.deep draw & hydroforming press, 59" stroke, low hours, 2001
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Hydraulic Presses
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Apt
Model: LPS-6300
Year: 2001
40 Ton, Wysong #H40-72, Hydra-mechanical, 6' overall, 6' x 12 Ga., Hurco AB5 Back Gauge, 1995
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Mechanical Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Wysong
Model: H40-72
Year: 1995
1000 Ton, Cincinnati #Series-50, 1500 ton @ bottom, 6" stroke, 40' overall length
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Mechanical Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cincinnati
Model: SERIES-50
Tekna #TK133, aluminum miter saw, 500mm blade diameter, 2012
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Miter Saws
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Tekna
Model: TK133
Year: 2012
Paper and Corrugated Materials Balers
1 Result
60" x 30" x 48" Bramidan #B6030, baler for cardboard, paper & soft plastic, 60" x 24"opening, 2017
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Paper and Corrugated Materials Balers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Bramidan
Model: B6030
Year: 2017
Power Squaring Shears (Inch)
1 Result
3/16" x 12' Cincinnati #1412, Mechanical, 30" front operated power back gauge, Squaring Arm, 1965, Low Price
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Power Squaring Shears (Inch)
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cincinnati
Model: 1412
Year: 1965
18" x 3" Ruesch #N2818 slitting line, 3" arbors, 5000 Lbs., Excellent Condition
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Slitting Lines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Ruesch
Model: N2818
No. 1047 Torrington, 2-die, rotary, 3-1/2" tubing, 1-3/8" solid
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Swaging Machines (Swagers)
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Torrington
Model: 1047
Vertical CNC Machining Centers
1 Result
Cincinnati #FTV840-2500, 123.6" x 31.5" table, 100" X, 32" Y, 31.5" Z, 50 HP, 12500 RPM, 48 automatic tool changer, 2003
Johnston Machinery Corp | Des Plaines, IL | Brian Johnston |
Category: Vertical CNC Machining Centers
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Cincinnati
Model: FTV840-2500
Year: 2003