Ingalls Process Equipment
Painesville, OH 44077
Platinum Level Dealer
Surplus Record Dealer Since 1995
Contact
About
Ingalls Process Equipment Company are buyers and sellers of used processequipment, 40 miles east of Cleveland Ohio, with a 18,000 sq. ft. warehouse.
Products & Services
- Chemical, Petroleum & Gas Processing Equipment
- Dryers
- Filters
- Heat Exchangers
- Mixers
- Plastic Equipment
- Pulverizers & Hammermills
- Rubber Machinery
Associations & Affiliations
557 listings in 157 categories
60 Hz Single Phase Transformers
2 Results
1 KVA 240/480 Primary, 120/240 Secondary, General Electric 9T51Y10
Category: 60 Hz Single Phase Transformers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: General Electric
One (1) used 1.0 kVA Transformer Manufactured by Electric Model: 9T51Y10 1.0 kVA, 50/60 Hz Primary Voltage: 240/480 Secondary Voltage: 120/240.
Ingalls Process Equipment has 1 more
listing in 60 Hz Single Phase Transformers.
60 Hz Three Phase Electric Brake Motors
3 Results
.09 HP KW RPM 1620 Coel Motor, 60 Hz, 110/115 Volts
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Coel
One (1) used Coel Electric Motor 0.09 kW 60/60 Hz 1620/1620 rpm 110/115 Volts.
Ingalls Process Equipment has 2 more
listings in 60 Hz Three Phase Electric Brake Motors.
60 Hz Three Phase Transformers
2 Results
3 KVA 504/456 Primary, 240 Secondary, General Electric 9T21A4019, type ML
Category: 60 Hz Three Phase Transformers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: General Electric
One (1) used 3 kVA Transformer Manufactured by Electric Model: 9T21A4019 3.0 kVA, 60 Hz, 3 phase Type: ML Can transform between 456V - 504V and 240V.
Ingalls Process Equipment has 1 more
listing in 60 Hz Three Phase Transformers.
.2 HP 900 RPM Martin Engineering #CD9-550, 230/460 Volts
Category: 60 Hz Vibratory Motors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Martin
One (1) used Martin Engineering Vibratory Motor Model: CD 9-550 Serial: 425184 -AB- RPM: 900 0.25 HP, 230/460V, 3 phase.
Ingalls Process Equipment has 6 more
listings in 60 Hz Vibratory Motors.
.3 HP Lightnin, ND-1VM, agitator drive, with DC SCR controller for vari-speed
Category: AC Variable Frequency Drives
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Lightnin
Model: ND-1VM
one(1) used 1/3 hp Lightnin Agitator Drive. Model ND-1VM Serial number 753085 Includes Focus 1 DC Drive controller for variable speed.
Ingalls Process Equipment has 5 more
listings in AC Variable Frequency Drives.
Agitator Mixers and Blenders
5 Results
.5 HP Lightnin #ND-2, agitator drive, 208-220-440 V., 1725/1425 RPM
Category: Agitator Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Lightnin
Model: ND-2
one(1) used 1/2 hp Lightnin Agitator. Model ND-2 Serial number 819990 1/2 hp, 208-220-440 voltage. RPM - 1725/1425 Unit weighs 71 lbs.
Ingalls Process Equipment has 4 more
listings in Agitator Mixers and Blenders.
Germfree Laboratories #SC-2/EXRS, portable HEPA air filter, fume extractor, 311 scfm
Category: Air Cleaners
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Germfree
Model: SC-2/EXRS
One (1) used Germfree Laboratories Portable Air Filter Model: SC-2/EXRS Serial number: 8102 Single phase, 120 V, with cord and plug two filters With Aerostar filter, SCFM 311, efficiency: 99.997 Filter number: 43808GF All in cabinet on casters.
Sartorius #Mark-3, moisture analyzer, control module with printer, heater module
Category: Analyzer
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sartorius
Model: MARK-3
one(1) used Sartorius Moisture Analyzer Mark 3 LMA100 P Electronic Moisture Analyzer Control Module with printer >LMA100PA-000U >S/N 34350030 Heater Module >LMA110SQ-000U >S/N 34250210 Includes a stack of aluminum sample dishes Includes a stack of sample pads Single phase, 115 voltage (standard house plug) ...more
Atomizers
2 Results
Bowen Engineering #AA-4, spray atomizer, 7.5 HP, 21600 RPM, 21 amp, 220 V.
Category: Atomizers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bowen
Model: AA-4
one(1) used Bowen Engineering Atomizer, div. of Niro Atomizer Inc. Model AA-4 Serial number 440 3 phase, 220 voltage, 7.5 hp, 21 amp Rated RPM 21,600 Was working when removed from service.
Ingalls Process Equipment has 1 more
listing in Atomizers.
Attritors
9 Results
Stickle Steam Specialties Inc, Batch Attritor, 50 gallon, 15 HP, 3 phase, 230/460 V.
Category: Attritors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Stickle Steam
One (1) used 50 gallon Batch Attritor Mfgd. by Stickle Steam Specialties Inc., Indianapolis, IN 24" diameter x 30" deep jacketed bowl 3" diameter screened discharge 2.5" diameter shaft with 1" diameter arms 15 HP XP tagged motor to a Falk gear reducer 3 phase, 230/460 voltage motor Furnas ...more
Ingalls Process Equipment has 8 more
listings in Attritors.
Bag Filter Housing, stainless steel, 4" diameter x 12" deep, 1-1/4" inlet/outlet, 4" top removable cover
Category: Bag Filters
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used Bag Filter Housing. Stainless steel, 4" diameter x 12" deep bag. Perforated stainless steel bag support. 1 1/4" inlet, 1 1/4" outlet. 4" top removable cover.
National Bulk Equipment, bulk bag unloader, with 4000 lb. hoist, receiver hopper w/Acrison feed on bottom
Category: Bagging Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: National
one(1) used National Bulk Equipment Bulk Bag Unloader with 4,000 lb Harrington hoist Includes bag hanger for picking up bags Pneumatic bag paddles to facilitate unloading (bag massage) Stainless steel surge hopper, with hinged front door Safety grate 2 cartridge dust collection in bag of surge hopper with 3 hp blower ...more
Ingalls Process Equipment has 2 more
listings in Bagging Equipment.
Balancing Machines (Dynamic and Static)
1 Result
Mettler Toledo #AB104, analytical balance, draft shield, 3 doors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Mettler Toledo
Model: AB104
two(2) used Metler Toledo Analytical Balance Model AB104 Serial number 115450032 Single phase, use with AC adaptor draft shield Draft shields three doors all work.
Bearings, Cooper SKF bearings, SAFC522, new surplus (2 available)
Category: Ball & Roller Bearings
Seller: Ingalls Process Equipment
Location: Painesville, OH
two(2) new Surplus Cooper SKF Bearings, 4" SAFC522 # 02BCSAFC522315GRAT # 02BCSAFC522315EXAT Inside diameter measured 3.919".
2" Kitz, Stainless Steel Ball Valves, (1) Conbraco/Apollo industrial ball valve, all 7" tall, 4 valves total
Category: Ball Valves
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Kitz
four (4) used 2" Stainless Steel Ball Valves, flanged CF8M Flanged Trim, stem and ball are all 316 stainless steel 7" tall Three - Kitz Ball Valves One - Conbraco Indust. ball valve - graphite packing.
Ingalls Process Equipment has 4 more
listings in Ball Valves.
Ball, Pebble, Sag Mills, Chemical Processing
22 Results
21" x 18" Pebble mill, 16 gallon wet capacity, Alumina brick lined chamber, 1.5 HP
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) used pebble mill Alumina brick lined chamber Inside dimensions: 21" diameter x 18" long 27 total gallons 16 gallon wet mill capacity Door opening: 8.25" x 8.25" 1.5 HP gear reduced drive with brake, 3 phase, 230/460V Bull gear and pinion gear On heavy duty stand.
Ingalls Process Equipment has 21 more
listings in Ball, Pebble, Sag Mills, Chemical Processing.
Basket Bottom Dump Centrifuges
1 Result
32" Ketema #Mark-III, basket centrifuge, Stainless steel perforated, top load, bottom outlet
Category: Basket Bottom Dump Centrifuges
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Ketema
Model: MARK-III
One (1) used 32" diameter Ketema Mark III Basket Centrifuge Mark III Model number 32 x 20 Serial number M-56694 Rated basket speed: 0-1325 RPM Rated: 96 lbs. per cu. ft. 32" diameter x 20" deep stainless steel perforated basket Top load Bottom outlet with hydraulic plow discharge 20 HP hydraulic drive 3 ...more
Basket Filters
3 Results
4" Kraissl Co., Basket strainer, 2" inlet/outlet, 4" dia. x 9" deep cast housing, 3" dia. x 5" deep removable basket
Category: Basket Filters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Kraissl
one(1) used Kraissl Co. Basket Strainer/Filter. Cast Housing is 4" diameter x 9" deep. 2" inlet and 2" outlet. 3" diameter removeable basket, 5" deep. a bottom drain valve.
Ingalls Process Equipment has 2 more
listings in Basket Filters.
16" wide x 54" long Motorized Belt Conveyor, 2" high side rails, 1/2 HP Boston gear reduced drive, 208-230/460 Volt, 3PH
Category: Belt Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used 16" x 54" Motorized Belt Conveyor 16" wide belt x 54" long adjustable height legs 2" high side rails Entry point is 27.5" off the ground Exit point is 35.5" off the belt Hinged tail is 15.5" roller conveyor on 4" centers 1/2 hp Boston Gear reduced drive 3 phase ...more
6" wide x 4.5" working area Radiant Technology #SMD-206, Infared Wire Mesh Belt Dryer, 48" overall length, Honeywell Digital Temperature Controller, 120 Volts, 1PH
Category: Belt Ovens
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used Radiant Technology Corp Infared Belt Dryer Model SMD 206 Serial number 1506028709 Belt is 6" wide - 4.5" wide working area 42" center to center length, 48" overall length SIngle phase, 120 voltage Variable speed, power switch, heat range, amps Honeywell Digital Temperature Controller ...more
Stainless Steel bin, 36" x 36" x 15" deep, 4" dia outlet, on casters, plexiglass top cover
Category: Bins
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) used Stainless Steel Bin 36" x 36" x 15" deep 4" diameter outlet On casters Plexiglass top cover removable, able to bolt on Overall height: 19".
4.75" width x 4" H x 5" D Blue M #110A-1A, electric lab furnaces, 150-1832°F, 1 KW, 120 V.
Category: Box Type Furnaces
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Blue M
One (1) used Blue M Electric Lab Furnace Model: M10A-1A Serial number: BA-1287 120 voltage, single phase, 60 cycle Max Watts: 1 kW Temperature Range: 150 F to 1832 F, 66 C to 1000 C Electric lab furnace with hinged front door Inside Dimensions: 4.75" wide x 4" tall x 5" deep.
Ingalls Process Equipment has 2 more
listings in Box Type Furnaces.
New England, Bucket Conveyor, soft unloader, reverse bucket elevator, 18" L x 10" W x 10" D Rex plastic bucket, .5 HP, 90 VDC
Category: Bucket Elevator Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: New England
one(1) used New England Bucket Conveyor (soft unloader). Reverse Bucket Elevator. Designed to lower product down 11' for a soft delivery. This unit has loading height of 48" and then lowers another 84". The Rex plastic buckets are 18" L x 10" wide x 10" deep. Buckets driven by a.5 hp 90 volt DC electric motor. ...more
19" x 15" x 18.5" Blue M #OV-490A-2, lab oven, Stainless steel box, 100-500°F, 120 V., 1 phase
Category: Cabinet Type Ovens
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Blue M
Model: OV-490A-2
one(1) used Blue M Lab Oven Model: OV-490A-2 Serial number JT-7576 Inside dimensions: 19" x 15" x 18.5" Rated for 100 F to 500 F (38C to 260 C) Stainless steel box Single phase, 120 voltage.
Ingalls Process Equipment has 2 more
listings in Cabinet Type Ovens.
Cartridge Filters
3 Results
2.5" x 19.5" Cuno Filter #4DC2, 3M, 316 Stainless Steel housing, (4) cartridges, 2" ball valve on the discharge
Category: Cartridge Filters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: 4DC2
One (1) used Cuno Filter, 3M Model: 4DC2 Part no. 4808702 316 stainless steel housing, 8" diameter Housing is 26" deep plus the height of top cover 4 cartridge unit with 4 unused cartridges Cartridges are 2.5" x 19.5" 2" ball valve on the discharge Housing is designed for 250 F maximum ...more
Ingalls Process Equipment has 2 more
listings in Cartridge Filters.
10 GPM @ 80' TDH, Goulds #3196, Centrifugal Pump, Stainless Steel, with mechanical seal, 360 RPM, 15 HP, Serial #715C718
Category: Centrifugal Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Goulds
Model: 3196
One (1) used Goulds Centrifugal Pump 316 stainless steel contact parts Model 3196 Size: 1 x 1.5 - 6 GPM: 10 Serial number: 715C718 RPM: 3600 Impeller Diameter: 4.12" Rated: 80 feet of head On base with motor 15 HP motor, 3 phase, 3480 RPM, 208-230/460 voltage Motor is a US Motors Unimount 125.
Ingalls Process Equipment has 2 more
listings in Centrifugal Pumps.
Alfa-Laval #WSB-104B-74/60/4108-11, centrifuge, skid mounted on casters, complete with control panel
Category: Centrifuges
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: WSB-104B-74/60/4108-11
one(1) used Alfa Laval Centrifuge. Model WSB 104B-74-60/4108-11. Serial no. 4039516. skid mounted on casters. Complete with control panel. 1/2 hp feed pump and discharge pump. 2 hp main drive. Revolution counter 95-100. worm wheel shaft 1700-1800.
Chemical and Processing Equipment - Miscellaneous
26 Results
Asahi Koki Co. #D-50-S-5, Continuous Mechanical Dehydrating Press, Stainless Steel contact parts, 1977
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Asahi
Model: D-50-S-5
Year: 1977
One (1) used Asahi Press, Continuous Mechanical Dehydrating Press Stainless steel contact parts Model: D-50-S-5 Serial number: 329 Built: 1977 3.7 kW gearhead drive, variable speed V-Belt to chain and sprocket Mfgd. by Asahi Koki Co., Tokyo, Japan.
Ingalls Process Equipment has 25 more
listings in Chemical and Processing Equipment - Miscellaneous.
Classifiers for Processing & Mining Equipment
1 Result
Cyclo-Tex #KC-21, Air Particle Classifier System, 3 HP, stainless steel cyclone fines collector, coarse dust collection cartridge pulse-jet system
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: KC-21
one(1) used Cyclo-tex Air Classifier 3 hp main motor, particle classifier Model KC-21 stainless steel cyclone fines collector Cyclone is stainless steel with tungsten lining course dust collection cartridge pulse jet type Accurate feeder.
Cressington #208HR, sputter coater, MTM20 Control, vacuum pump, single phase
Category: Coating Machines
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Cressington
Model: 208HR
One(1) used Cressington Sputter Coater Model 208HR MTM20 Controller Supplied with vacuum pump. Single phase, Powers up and lights up.
Colloid Mills
3 Results
Charlotte #7, colloid mill, 10 HP, 3600 RPM direct driven, Stainless Steel contact parts, jacketed chamber
Category: Colloid Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Charlotte
Model: 7
One(1) used 10 hp Charlotte inline Colloid Mill Model 7 Serial Number 1394R Stainless Steel Contact Parts, Jacketed chamber 10 hp, 3 phase, 440 voltage only 3600 rpm direct driven All mounted on a heavy duty base.
Ingalls Process Equipment has 2 more
listings in Colloid Mills.
Commercial Printing Presses and Equipment
1 Result
Pressco #465, screen printing press, 80 psi, 12 hg.in. vacuum, serial #710304
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Pressco
Model: 465
Pressco Screen Printing Press Model 465 Serial number 710304 Max air 80 psi Vacuum Min. 12 hg. in.
Conveyors Vibratory Feeders
4 Results
5.5" wide x 6' long, Carrier vibrating conveyor, Stainless Steel, clamp on top cover, 4 springs
Category: Conveyors Vibratory Feeders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Carrier
One (1) used Carrier Vibrating Conveyor 5.5" x 6' long inside dimensions Stainless steel and clean Clamp on top cover 4 springs 2 vibratory motors, 3 phase 230/460 voltage Bottom discharge, top inlet Test ran video available on our YouTube channel.
Ingalls Process Equipment has 3 more
listings in Conveyors Vibratory Feeders.
Cyclone Separators
1 Result
1-5/8" Buchi #SVL-42, Glass Cyclone Separator, 12-7/8" overall height, unused
Category: Cyclone Separators
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Buchi
Model: SVL-42
one(1) unused Buchi Glass Cyclone Model SVL-42 Overall Height 12 7/8" Top outlet Threaded Glass 1 5/8" diameter Bottom Outlet is 1" Inside diameter Side inlet 1 3/4" Outside diameter unused.
3/8" Graco Husky Lab, Double Diaphrarm Pump, 7-26 GPM, 100 psi, 7 bar
Category: Diaphragm Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Graco
one(1) used Graco Husky 307 Dbl. Diaphragm Pump. Part no. D31255 Series 104E. 3/8" inlet and outlet GPM rating 7 - 26 gpm. weight 6.8 lbs. Rated max 100 psi, 7 bar.
Ingalls Process Equipment has 15 more
listings in Diaphragm Pumps.
9 KW, Glo-Quartz Electric Heater Co. #Heatmax, immersion heaters, 22 amps, Nema 4, (8 available)
Category: Direct Fired Heaters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Glo-Quartz
Model: HEATMAX
Eight (8) unused 9 kW Immersion Heaters Mfgd. by Glo-Quartz Electric Heater Co. HeatMax Heaters Cat. no. 3SLINX-29030R39E3-TW Watts: 9000 Amps: 22 Volts: 230, 3 phase Material Type: Incoloy Code: GK Three U-shaped heating elements 30" horizontal heating elements 39" vertical riser height 3.5" legs NEMA ...more
Dispersion Mixers-Blenders for Chemicals
5 Results
Myers Engineering #V550/500A-3-3, dual shaft vacuum mixer, (2) 3 HP motors, vacuum cover
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Myers
One (1) used Myers Engineering Dual Shaft Vacuum Mixer Model: V550/500A-3-3 Serial number: 673 14" diameter x 14" deep stainless steel jacketed tank two 3 HP motors, UL tagged for hazardous location 3 phase, 230/460 voltage 3 HP High Speed Disperser, variable speed 1.25" diameter shaft, 4" saw ...more
Ingalls Process Equipment has 4 more
listings in Dispersion Mixers-Blenders for Chemicals.
Double/single Arm Mixers and Blenders
2 Results
Baker, double arm spiral blade lab mixer, 7.25" x 5.25" x 7" deep Stainless steel jacketed bowl, 2 HP
Category: Double/single Arm Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Baker
one(1) used Baker Pekins Double Arm Spiral Balde Lab Mixer Double Arm Spiral Baldes Bowl DImensions 7.25" x 5.25" x 7" deep Stainless steel Jacketed Bowl Jacketed for 90 psi at 650 F, National board stamped 1243 Manual tilt discharge 2 hp Gear Reduced Drive, motor rebuilt in 2022 XP tagged Motor ...more
Ingalls Process Equipment has 1 more
listing in Double/single Arm Mixers and Blenders.
Dryers and Coolers
1 Result
6" x 48" Radiant Technology Corp (RTC) #M-100, wire mesh continuous dryer, infarent belt, 300°C
Category: Dryers and Coolers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Radiant Technology Cotp
Model: M-100
one(1) used Radiant Technology Corp. Infared Belt Dryer Model M-100 Serial number 840050 rated for 300 C Belt is 6" wide, 4.5" wide work zone Continous, 42" center to center, 48" overall length Single Phase, 240 voltage Variable speed, power switch, heat range, amp meter.
Dust Collectors
7 Results
77 sq.ft., Flex Kleen #84BVEC16-III, dust collector, Stainless steel housing, 7.5 HP
Category: Dust Collectors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Flex Kleen
Model: 84BVEC16-III
One (1) used Flex Kleen Dust Collector Model 84BVEC16 III Serial number 200083, Job no. 13200 16 bags, 6" x 84" long about 77 sq ft of filter cloth Pulse jet type 32" x 32" stainless steel housing with cone bottom discharge 7.5 HP Blower, 3500 RPM, 208-230/460 voltage On legs magnehelic gauge a ...more
Ingalls Process Equipment has 6 more
listings in Dust Collectors.
Acrison #MDII, control panel with touch screen, serial #192424-01
Category: Electrical MRO Components & Parts
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Acrison
Model: MDII
One (1) used Acrison control panel Touch screen, Model MDII Panel serial number: 192424-01 Sold as is Acrison feeders sold separately.
15.75" width x 15.75" D x 17" H Hung Ta #HT-8047A, environmental chamber, aging oven, 300°C, 2015
Category: Environmental Chambers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Hung Ta
Model: HT-8047A
Year: 2015
one(1) used Hung Ta Environmental Chamber, Aging Oven Model HT-8047A Serial number 8973 Built 2015 Single Phase, 220 voltage Chamber dimensions: 40cm(15.75") x 40 cm(15.75") x 45 cm(17") Heat: 1.8 kw Had a rotating product plate, (missing) Rotating shaft rotates when powered up Temperature: RT-200 C (or ...more
Silva, 14 gallon expansion tank, 200 psi, unused, 2005
Category: Epoxy Lined Tanks
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Silva
Year: 2005
One (1) unused Expansion Tank 14 gallons MAWP: 200 PSI @ 450 F MDWT: -20 F @ 200 PSI Built: 2005.
Ingalls Process Equipment has 2 more
listings in Epoxy Lined Tanks.
Evaporators
2 Results
Buchi #Rotavapor-R-114, Rotary Evaporator, Thermo Scientific Neslab RTE7 water bath/chiller, rotating flask w/ variable speed drive, 115 Volt, 1PH
Category: Evaporators
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Buchi
Model: ROTAVAPOR-R-114
one(1) used Buchi Rotavapor Lab Evaporator Model R-114 Single phase, 115 voltage Buchi Waterbath, Model B-480 Rotating flask, variable speed Glass condensor Equipped wiht Thermo Scientific Neslab, RTE7 water bath Neslab supplied coolant for condensing.
Ingalls Process Equipment has 1 more
listing in Evaporators.
Explosion Proof AC Electric Motors
3 Results
5 HP 1200 RPM U.S. Motors, Frame 254U, explosion proof, 208-220/440 Volts
Category: Explosion Proof AC Electric Motors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: U.S. Motors
Frame: 254U
One (1) used 5 HP US Motors Electrical Motor Frame: 254U RPM: 1200 Voltage: 208-220/440 3 phase, 60 cycle XP tagged.
Ingalls Process Equipment has 2 more
listings in Explosion Proof AC Electric Motors.
Extruders and Extrusion Lines
2 Results
W & P #ZDS-K28, Twin Screw Extruder, 28mm, 31" long, 5 barrel sections, 1978
Category: Extruders and Extrusion Lines
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: ZDS-K28
Year: 1978
One (1) used Werner Pfleiderer Twin Screw Extruder Model ZDS-K28, Serial number 513991, built 1978 Co-rotating Screws, side by side 28 mm screws Screw length: 31" long (787.4mm) center of feed throat to end of screws 5 barrel sections (2 are vented and plugged) Electrically heated, water cooled die W & P ...more
Ingalls Process Equipment has 1 more
listing in Extruders and Extrusion Lines.
Filling Equipment (Fillers)
3 Results
Accutek #SVF-1-32, Single-Head Piston Filler, Stainless Steel, 2.5" x 9" product cavity, 2003
Category: Filling Equipment (Fillers)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Accutek
Model: SVF-1-32
Year: 2003
one(1) used Accutek Packaging Equipment Co. Piston Filler Model SVF 1-32 Serial number 201120 built 2003 stainless steel missing nozzle end Cylinder moves back and forth pneumatically Click the switch and it cycles once Cylinder cavity is approx. 2.5" x 9" for product space On stand with casters. I can send ...more
Ingalls Process Equipment has 2 more
listings in Filling Equipment (Fillers).
Flakers
2 Results
47.5" x 43" Sandvik, belt flaker cooler, Stainless Steel belt, knife discharge
Category: Flakers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sandvik
one(1) used Sandvik Belt Flaker Cooler. 47.5" wide x 43" long overall length 32" of cooling, spray underside of belt. Underside of belt has black V-belt attached Knife discharge, Can be supplied with cooling system Rotoformer for applying pastels stainless steel belt.
Ingalls Process Equipment has 1 more
listing in Flakers.
Flow Meters
2 Results
Max Machinery #243-234, helical rotor flow meter, 3" NPT inlet-outlet, unused
Category: Flow Meters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Max Machinery
Model: 243-234
one(1) unused Max Machinery Helical Rotor Flowmeter. Model 243-234 Serial number C129010 3" NPT inlet - outlet Rated Viscosity 1 - 1,000,000 cps Rated Accuracy +,- 0.5% of reading over entire range. Rated Range: 15 to 1400 liters/min (3.96 to 370 gallons) LOC: T2.
Ingalls Process Equipment has 1 more
listing in Flow Meters.
Fluid Bed Dryers
2 Results
Applied Chemical Technology, lab spray dryer & fluid bed dryer, cabinet style, self contained
Category: Fluid Bed Dryers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Applied Chemical Tech
One (1) used lab spray dryer and fluid bed dryer Manufactured by Applied Chemical Technology cabinet style, self contained, control panel Digital temperature and air velocity readouts atomizer spray nozzle.
Ingalls Process Equipment has 1 more
listing in Fluid Bed Dryers.
Food Processing Tanks
1 Result
15 gallon Robot Coupe Tank with 3 sets of chopper blades, 60 qt., 18" diameter x 15" deep
Category: Food Processing Tanks
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Robot
one(1) unused 60 qt. Robot Coupe Tank. 18" diameter x 15" deep. We believe it goes on a RSI60V Robot Coupe Processor. sanitary stainless steel. a used locking top cover, gasket is good. 3 sets of chopper blades. We believe the chopper blades are all unused.
Forklift Truck Attachments - Miscellaneous
4 Results
Bulldog Battery, forklift charger, 24 V.
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bulldog
One (1) used Forklift Battery Charger Manufactured by Bulldog Battery Input: 208/240/480V, 3 phase (currently wired for 230V) Output: 24V Amp Hours: 451-540.
Ingalls Process Equipment has 3 more
listings in Forklift Truck Attachments - Miscellaneous.
6" Fabri Valve knife gate valve, new surplus, bi-directional, 150 CWP @ -20/150°F
Category: Gate Valves
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Fabri Valve
One (1) unused 6" Fabri-Valve Knife Gate Valve - New Surplus Size: 6 Serial number: 892501001001 Figure C45 DFV (Drilling Fluid Valve) Bi-directional Gate: Stainless steel Material: DI Working Pressure: 150 CWP @ -20/150 F Seat: E01 Unused, 8" units available.
Ingalls Process Equipment has 1 more
listing in Gate Valves.
2" Viking #LQ4125, gear pump, 5 HP explosion proof 230/460 motor, serial #10525778
Category: Gear Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Viking
Model: LQ4125
One (1) used 2" Viking Gear Pump on base Model LQ4125 Serial number 10525778 Gear reducer 3-551-003-4.19 DD 5 HP XP tagged motor, 3 phase, 230/460 voltage Missing packing gland.
Gear Reducers, With Driving Unit
1 Result
3 HP, 1740 RPM, Tiger #2, Gear Reducer/Gearmotor, Baldor motor, 25.00 :1 ratio, 1" output shaft diameter, 208-230/460 Volts, 3PH
Category: Gear Reducers, With Driving Unit
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Baldor
one(1) used 3 hp Gear Reduced Drive 3 hp Baldor Motor, connected to a Tiger 2 Gear Reducer Previously ran a rotary airlock 3 phase, 208-230/460 voltage. Gear Ratio is 25:1, output rpm is 69.6 Output shaft is 1" diameter. test ran good, video available.
Gearboxes (Gear Reducers - No Driving Unit)
3 Results
20 HP, Sterling, Gear Reduced Drive, 100 RPM output, 460 Volts, 17.10 :1 ratio, 15 teeth on the gear, 3" pitch
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sterling
one(1) used 20 hp Gear Reduced Drive. 20 hp motor, 460 voltage only. Mfg. by Sterling Power Systems Speed Reducers. Type 7245C, Frame 286UD, Input 1750, Output 100 Ratio: 17.1:1 15 teeth on the gear. 3" pitch. drive had been test run in our shop.
Ingalls Process Equipment has 2 more
listings in Gearboxes (Gear Reducers - No Driving Unit).
Glass Lined Tanks & Vessels
1 Result
1500 gallon DeDietrich, glass lined vertical tank, 70" ID x 84" straight wall, dish top & bottom
Category: Glass Lined Tanks & Vessels
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Dedietrich
one(1) used 1,500 gallon DeDietrich Glass Lined Vertical Tank 70" inside diamete x 84" straight wall Glass lining looks good, has good polish Dish top and dish bottom Top includes: 18" manway with cover (4) 3" inlets with flanges around perimeter (1) 3" center top inlet with flange Bottom ...more
Gravametric Feeder and Loaders
1 Result
Spiroflow feeder drive, 5 HP, 208-230/460 V., 7" x 14" top opening, 6" discharge
Category: Gravametric Feeder and Loaders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Spiroflow
one(1) used Spiroflow Feeder Drive 5 hp Leeson Motor, mounted to gear reducer 3 phase, 208-230/460 voltage top inspection access opening, 7" x 14" 4.5" diameter receiver for spiral and tube 6" discharge Unit has been test run in our shop.
Grinding Fixtures/Attachments
2 Results
Angstrom, Grinding Puck, ring & grinding chamber, 4.5" diameter, 1.5" deep
Category: Grinding Fixtures/Attachments
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Angstrom
one(1) used Angstrom Grinding Puck, Ring and Chamber. 4.5" diameter. 1.5" deep. Chamber, top cover, puck and ring. Loc.: T2-shelf.
Ingalls Process Equipment has 1 more
listing in Grinding Fixtures/Attachments.
Grinding Mills - Ball, Pebble, Sag, Mining
1 Result
Fritsch #Pulverisette-5, Planetary Laboratory Ball Mill, (2) 250 mL grinding bowls, (2) 500 mL grinding bowls, 4 grinding stations, lockdown bars, digital touch pad, 120 Volt, 1PH, 1997
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Fritsch
Year: 1997
one(1) used Fritsch Planetary Lab Mill Pulverisette 5" Serial number 05.302/384 built 1997 Digital Touch pad controls Single phase, 120 voltage variable speed. Digital timer Safety Latch on Hood Contains 4 grinding chambers, with lockdown bars For high speed grinding of both liquid and solids 2- 250 ml grinding ...more
Heat Exchangers - Carbon Steel Shell - Stainless Steel Tubes
1 Result
250 psi, Heat Exchanger, 1/4" dia. x 27" long tube, 2" Dia. Shell, C-403-A4-0
Seller: Ingalls Process Equipment
Location: Painesville, OH
one (1) used heat exchanger Model **C-403-A4-0 (first two digits are missing on tag) 31 stainless steel, apprx. 1/4" diameter, 27" long tubes 2" Diameter Shell Serial Number T21292 Operating Pressure: Shell - 250 PSI, Tubes - 250 PSI, Temp 500.
Heat Exchangers, Stainless Steel Shell & Tubes
1 Result
23.5 sq.ft., 300 psi shell, 300 psi tube, Bell & Gossett, U-tube shell & tube heat exchanger, 1989
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bell & Gossett
Year: 1989
one(1) used Bell & Gossett Shell and Tube Heat Exchanger, Approx. 23.5 sq ft U-tubes. National Board No. 11513 Serial number - 89R81599-01 Built 1989 Part no. 5-262-08-036-009- SU -83-2 Bolt on head with 3" flanged inlet/outlet. Shell has (1) 3" flanged inlet and (1) 1" flanged inlet 20 tubes each side, 3/4" OD ...more
High and Low Speed Dispersers
13 Results
1 HP Eiger Machinery #HSD-TEFC, High-Speed Laboratory Disperser, 3" diameter disperser blade, 15.5" vertical travel, 3/4" diameter x 13" long shaft, 5000 RPM, 120 V.
Category: High and Low Speed Dispersers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Eiger Machinery
Model: HSD-TEFC
one(1) used Eiger Machinery Inc. High Speed Lab Disperser Model 1 hp LHSD TEFC 1 hp Motor 1 phase, 120 voltage, 3.6 amps Rated for 5,000 rpm 3/4" diameter Stainless Steel shaft x 13" long shaft guard 3" diameter saw tooth blade, stainless steel AC inverter drive with touchpad controls Variable speed ...more
Ingalls Process Equipment has 12 more
listings in High and Low Speed Dispersers.
High Intensity Mixers and Blenders
1 Result
3560 liter Glass Master #5100, Turbine Mixer, 30" deep x 96" diameter vertical pan, 50 HP belt driven motor, 230/460 V.
Category: High Intensity Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Master
one(1) used GlassMaster Turbin Mixer Model 5100 50 hp belt driven motor 3 phase, 230/460 voltage. 30" deep bowl x 96" Overall diameter is 102" Misc. top hinged access doors paddles and scrappers wear resistant liner on floor and walls Bottom outlet with pneumatic slide gate valve approx. weight: 9,625 ...more
Holoflite Dryers
1 Result
7" x 10' Metso #S0712-4, holoflite double screw dryer, jacketed flights, cored shafts, rotary unions
Category: Holoflite Dryers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Metso
Model: S0712-4
One (1) used Metso Holoflite Double Screw Dryer Model: S0712-4 Two (2) 7" diameter x 10' long screws Jacketed flights, cored shafts, with rotary unions Jacketed trough Domed bolt on cover End bottom discharge Chain and sprocket driven Rated for material flow of 680 pounds per hour Rated for material input of ...more
NAVCO #BH-3, Pneumatic Bin Hopper Vibrator, 1/4" - 3/8" wall thick, 8.3 - 8 scfm at 50 psi
Category: Hoppers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Navco
One (1) Used Pneumatic Bin Hopper Vibrators Model BH-3 Wall Thickness: 1/4" - 3/8" Air Consumption S.C.F.M. at 50 psi: 11.6.
Ingalls Process Equipment has 5 more
listings in Hoppers.
2.5" Suction hose, Tigerflex #UF1-250X100, unused reel,-40°F to 150°F, 100' long
Category: Hose Machinery and Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Tigerflex
Model: 2.5 SUCTION HOSE
One (1) unused reel of 2.5" Tigerflex suction hose 2.5" diameter x 100' long Model: UF1-250X100 Extra heavy duty polyurethane lined Abrasion resistant, oil resistant Temperature range: -40 F to 150 F Rigid PVC Helix reinforced.
Ingalls Process Equipment has 1 more
listing in Hose Machinery and Equipment.
12 Ton, Carver #3912, hydraulic press, 6" x 6" platens, hinged safety door, no heating elements included
Category: Hydraulic Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Carver
Model: 3912
one(1) used 12 ton Carver Hydraulic Press 6" x 6" platens. 12 ton Clamping force Tag number 20300-276 Manual Hydraulic Pump - Model no. 3912 with pressure gauge 6" x 6" platens are drilled for heating elements No heating elements included (see photo) Hinged safety door.
Ingalls Process Equipment has 5 more
listings in Hydraulic Presses.
4 GPM Hydro-Pak, High Pressure Pump, 5 HP motor w/ resevoir tank, 2200 psi
Category: Hydraulic Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used Hydro-Pak High Pressure Pump Serial number P84-1161-1 5 hp motor with resevoir tank Rated Max discharge pressure of 2,200 psi.
Coors USA, Roller Mill Jar, (2) 1 liter, With lid and locking bar
Category: Jar Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Coors
Three (3) used Coors Rolling Mill Jars Coors USA 2 1 liter each With lid and locking bar More available upon request.
Ingalls Process Equipment has 8 more
listings in Jar Mills.
4" x 8" Sturtevant Jaw Crusher, 3 HP, On stand, back replacement jaw is missing
Category: Jaw Crushers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sturtevant
one(1) used Sturtevant Jaw Crusher. Serial number 1329 4 3 hp belt driven. On stand. The back replacement jaw is missing. Unit can be put under power in our shop prior to sale.
Kettles (Food Based)
1 Result
125 gallon Groen #TA-125, Stainless Steel jacketed kettle with sweep scraper, 45 psi
Category: Kettles (Food Based)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Groen
Model: TA-125
One (1) used 125 gallon stainless steel jacketed Groen kettle Double motion, bridge mount agitation Model: TA-125 Serial: 00224-1, National Board 140333 304 SS, #4 polish Fully jacketed Steam jacket kettle Max WP: 45 psi @ 450 F hot oil Min design metal temp: -20 F @ 45 psi Center mount sweep and finger scraper blades ...more
24" width x 20" H x 30" D Harrop #GF-BG-18-800-2300, Gas Fired Kiln, 480 volts, 7 Amps, 2 burners, 2300°F
Category: Kilns
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Harrop
one(1) used Harrop Gas Fired Kiln, Model GF-BG-18" - 800 - 2300 Serial number 2951 (#19) Inside dimensions: 24" w x 20" tall x 30" deep 3 phase, 480 voltage, 7 amps Stand alone control panel - digital readout 2 burners Rated for 2300 F two units available.
Lab Balancers & Scales
1 Result
Mettler, digital balances
Category: Lab Balancers & Scales
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Mettler
Model: METTLER TOLEDO
Two(2) used Mettler Toledo Digital Balances 1- Model AB54 Serial number 1115033531 with Vinyl dust cover with dtaft shield 1 - Model ML4002E /03 Serial number B236271376 Type: New Classic MF.
Fisher #Accuspin 400, Scientific Lab Centrifuge, 4000 RPM, digital read out, 115 Volts, 1PH
Category: Lab Centrifuges
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Fisher
Model: ACCUSPIN
one(1) used Fisher Scientific Lab Centrifuge Model: Accuspin 400 Serial number 403285554 Rotor rated for 4,000 rpm Holds 4 vials, holders swing Single phase, 115 voltage Digital Readout, locking door, variable speed.
Ingalls Process Equipment has 1 more
listing in Lab Centrifuges.
Bramley, 1.5 gallon double arm Beken blade lab mixer, Stainless Steel,jacketed, 3 HP
Category: Lab Mixers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bramley
One (1) used 1.5 gallon Bramley Double Arm Beken Blade Lab Mixer Size: 1.5 gallon Serial number: 1232 Stainless steel, jacketed mixing chamber Two mixing arms with wing blades (Beken blades) Manual tilt discharge 3 HP gear reduced drive, 230/460V motor starter and start/stop buttons Flat removable top cover Unit has ...more
Ingalls Process Equipment has 1 more
listing in Lab Mixers.
Applied Research Laboratories, Briquetting lab press, hydraulic, Webtech digital read out, 1 HP
Category: Lab Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Applied Research
One (1) used Applied Research Laboratories Lab Briquetting Press Hydraulic Serial number 6058 Webtech digital readout 1 HP, 3 phase 220/440 voltage motor Controls include: start/stop, pressure control, press/down/hold Approximate briquette size: 1" x 1.4" deep.
VWR Scientific Products #1136, programmable circulating water bath, 5.5" x 5.5"removable cover
Category: Lab Water Baths
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Vwr
Model: 1136
one(1) used VWR Scientific Products Circulating Water Bath Model 1136 Serial number 801329 Programmable Temperature Controls, heats and cools Can be used to heat an external Jacket Touchpad controls Single phase, 120 votls has high and low switch for pump. 1/4" inlet outlet for pumping to an external jacket ...more
Laboratory Mills
2 Results
Keith, Three Roll Lab Mill, 4" diameter x 8" long, 230 Volt, 3PH
Category: Laboratory Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Keith
one(1) used 4" x 8" Keith Three Roll Lab Mill 4" x 8" long cored rolls Cored for cooling Adjustable flip up brass endguides Safety shutoff cable above rolls Safety shutoff button at knee level 3 phase motor, wired for 230 voltage Adjustable 1st and 3rd rolls Discharge knife with apron Test ran ...more
Ingalls Process Equipment has 1 more
listing in Laboratory Mills.
Lift Tables
1 Result
4500 lb. Southworth lift table, air operated PalletPal with rotating top,dust curtain (3 available)
Category: Lift Tables
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Southworth
One (1) used Southworth Lift Table, pneumatic One (1) used Southworth Lift Table, pneumatic Height in down position: 11.75" Height in up position: 31" Pneumatically operated Equipped wtih dust curtain fork pockets on the sides for moving them This looks to be an "Air PalletPal" but no tag was found ...more
Lifting Magnets
2 Results
14" x 12" Eriez Mfg. ##FGH-4, Magnet, 4.75" diameter inlet/outlet
Category: Lifting Magnets
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Eriez
Model: #FGH-4
One (1) used Eriez Manufacturing Magnet Model 14 1/2 x 12 FGH - 4 Serial number 36513 Style: 8-10-6 4 sets of removable magnets in housing with hinged door Inlet / outlet - 4.75" diameter Approx. 41" from inlet to outlet.
Ingalls Process Equipment has 1 more
listing in Lifting Magnets.
Lighting Fixtures and Lights
1 Result
Locite Corp #Zeta-7400, UV lamp, adhesive curing, manually raise & lower
Category: Lighting Fixtures and Lights
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Locite
One(1) used Loctite Corp Zeta 7400 UV lamp Zeta 7400 includes lamp, plugs and cords adhesive curing manually raise and lower it Has been powered up and works.
Babbit Bearing, ball or pebble mill, 12" inside diameter, 10" wide, 15" outside, used
Category: Linear Bearings & Bushings
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Babbit
one(1) used Set of Ball Mill or Pebble Mill Babbit Bearings. 12" inside diameter 10" wide. 15" outside diameter Includes bearing grease covers.
Magnetic and Vacuum Motor Starter Contactors Only
1 Result
Allen-Bradley, 509-BOD, motor starters, Nema 1 (4 available)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Allen-Bradley
Model: 509BOD
four (4) used Allen Bradley Motor Starters. Model 509-BOD. Price is for each.
Material Handling Equipment
8 Results
10" x 10" Pneumatic Slidegate
Category: Material Handling Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used 10" x 10" Slide Gate Valve. pneumatic.
Ingalls Process Equipment has 7 more
listings in Material Handling Equipment.
Material Lifts - (Drum, Pallet, Vacuum)
2 Results
50 lb. Anver vacuum lift with blower, hose & lift, 5 HP, equipped with a bin filter
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Anver
One (1) used Palamtic Vacuum Lifter 5 HP vacuum pump/blower, 3 phase, 460V only Approximately 40' of hose Lifting mechanism is 8" x 15" long and looks to be in good condition Last used for 50 lb. bags a bin filter 7' of 7" diameter hose 40' of 2" diameter hose.
Ingalls Process Equipment has 1 more
listing in Material Lifts - (Drum, Pallet, Vacuum).
Drais Mannheim #PERL-MILL, Lab Perl Media Mill, 1/2 liter, Stainless Steel, V-belt driven, 5 HP, Control panel, Poly grinding disc
Category: Media Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Drais
Model: PERL-MILL
One (1) used 1/2 liter Drais Mannheim Lab PERL Mill Model PERL MILL Serial number: 55 890 Machine Type: PML-V/H Commission Number: 31 3469 Stainless steel V-belt driven with step speed pulley 4.0 kW (5 HP) motor Control panel Poly grinding disc Chamber is rated for 3 bar (45 psi) The drive unit & mill chamber can ...more
Ingalls Process Equipment has 7 more
listings in Media Mills.
J H Day, 3-roll mill, bronze end guides, 12" rolls, adj replaceable bevel scrapers
Category: Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: J H Day
one(1) used Set of Bronze End Guides. For J.H. Day Three Roll Mill, 12" diameter rolls Came off a 12" diameter Three roll mill Casting number on back is 31170 Top: 11 3/8" L-R Top to point: 14" Adj. Replaceable Bevel Scrapers Weight for the set: 42 lbs.
Ingalls Process Equipment has 3 more
listings in Mills.
Pig steel spill containment pallet, PAK239, 66 gallons, (2) 55 gallon drums, unused
Category: Misc. Agricultural Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) unused Steel Spill Containment Pallet Mfgd. by New Pig Item no. PAK239 66 gallon capacity Holds two (2) 55 gallon drums Max rated weight: 2,500 lbs. 35" x 53" x 12.375" tall.
Misc. Laboratory and Research Equipment
8 Results
Brookfield #DV-II + PRO, Viscometer, digital read out w/ touchpad controls, temperature probe, 115 Volts, 1PH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Brookfield
Model: DV-II
one(1) used Brookfield Viscometer, Model DV-II + PRO Model no. DV-II + PRO Serial number RTP73750 Digital Readout with touchpad controls Jacketed tooling for cooling Single phase, 115 voltage Includes Temperature Probe With stand, adjustable height.
Ingalls Process Equipment has 7 more
listings in Misc. Laboratory and Research Equipment.
Flexible Spiral Conveyors, stainless steel, various sizes (4 available)
Category: Miscellaneous Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Four(4) used Flexible Spiral Conveyors. All stainless steel. All are round stock. one(1) used 19' long, 1/2" round, 3.1" O.D. one(1) used 17'6" long,.33" round, 2.3" O.D. one(1) used 12'9" long,.32" round, 2.3" O.D. one(1) used 11'4" long,.32" round, 2.3" O.D. Price is for each.
Miscellaneous Feeders
1 Result
Flexicon, Feeder Drive, 7.5 HP, Frame 213TC, SE Encore, fit a feeder with a 6" x 18' long tube
Category: Miscellaneous Feeders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Flexicon
one(1) unused Flexicon Feeder Drive unused 7.5 hp Baldor Motor, 3 phase, 230/460 voltage. Frame 213TC UL tagged motor for hazzardous duty Unused Winsmith Gear Reducer SE Encore This was a spare drive for a super sack unloader It fit a feeder with a 6" x 18' long tube.
Miscellaneous Filters
4 Results
Ronningen Peter Ronningen-Peter filter, set of 3 Stainless Steel canisters, 4" OD x 42" long
Category: Miscellaneous Filters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Ronningen Peter
one(1) used Set of 3 Ronningen-Petter Filters. SS-73-203 BW-VIB Includes stand with 3 canisters, 4" OD x 42" long. Each canister has three filter tubes, approx 1.1" diameter. Canisters are stainless steel. Previously used in the ceramic industry. Quick disconnect connections for the canister covers.
Ingalls Process Equipment has 3 more
listings in Miscellaneous Filters.
Miscellaneous Furnaces, Ovens and Parts
1 Result
Incubator / Oven, VWR #3015, water jacketed, 5.5 cu.ft. chamber, 120 V., serial #1000295
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Vwr
Model: INCUBATOR / OVEN
One (1) used VWR 3015 Water Jacketed Incubator/Oven Shel Labs/Sheldon Manufacturing Model: 3015 Part No: 9150567 Serial No: 1000295 120V, 5.0A, 50/60 Hz, single phase Water jacketed 5.5 cubic feet chamber Internal dimensions (w x h x d): 18.5" x 24.5" x 18.5" External dimensions (w x h x d): 23" x ...more
Miscellaneous Mixers and Blenders
9 Results
Dantco, bow-tie mixer, mechanical vari-speed, 15 HP explosion proof motor, floor mount, air over oil lift
Category: Miscellaneous Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Dantco
One (1) used Dantco Bow-Tie Mixer Floor mount, air over oil lift Mechanical variable speed RPM meter 15 HP XP motor, 230/460V, 3 phase 2.5" x 41" stainless steel shaft 18" diameter bow-tie mixer blade Overall dimensions:33" w x 84" l x 92" h Blade to floor in down position: 4.5" ...more
Ingalls Process Equipment has 8 more
listings in Miscellaneous Mixers and Blenders.
Miscellaneous Plastic and Rubber Equipment
2 Results
1.75" Extruder Screw, 3'- 11-5/8" overall length
Seller: Ingalls Process Equipment
Location: Painesville, OH
one (1) used 1.75" diameter extruder screw Overall Length: 3' 11 5/8".
Ingalls Process Equipment has 1 more
listing in Miscellaneous Plastic and Rubber Equipment.
Miscellaneous Testing Equipment
2 Results
Grabner Instruments #420-000-00, Ametek Petrolab flash point tester, touchpad digital read out, 1 phase
Category: Miscellaneous Testing Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Grabner Instruments
Model: 420-000-00
one(1) used Ametek Petrolab Flash Point Tester Type 420-000-00 Serial number 10-02-578 Grabner Instruments Digital readout, touchpad Single phase.
Ingalls Process Equipment has 1 more
listing in Miscellaneous Testing Equipment.
Cincinnati, Mixer Muller, 12" diameter x 6" deep, parts machine
Category: Mullers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Cincinnati
One (1) used Cincinnati Mixer Muller Incomplete unit but still good for parts 12" Diameter x 6" Deep Pan Motor: Century 1/3 hp, 1750rpm, Single Phase, 60 Hz, Frame J56, 115V.
Ingalls Process Equipment has 1 more
listing in Mullers.
Neck Banders and Cappers
2 Results
Accutek #BT, Pneumatic Chuck Capper, 75mm & 90 mm chucks, aluminum pneumatic foot pedal
Category: Neck Banders and Cappers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Accutek
Model: BT
One (1) used Accutek Pneumatic Capper 75mm and 90 mm chucks included Unused urethane chuck liners available Model BT aluminum pneumatic foot pedal Multiple chucks available in various sizes.
Ingalls Process Equipment has 1 more
listing in Neck Banders and Cappers.
Packaging Checkweighers
1 Result
Mettler #M3-CZ2100-GT, Checkweigher
Category: Packaging Checkweighers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Mettler
Model: M3-CZ2100-GT
one(1) used Mettler Checkweigher Model M3 CZ2100 GT Serial number S990695-1A. LOC CB3427.
Paddle Mixers and Blenders
1 Result
Draid #T50, lab plow paddle mixer, 50 liter, 13.2 gallon, 18" L x 15.75" dia. Stainless Steel chamber
Category: Paddle Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Draid
one(1) used Draid Lab Plow Paddle Mixer Model T50 Serial number 48916 50 liter - 13.2 gallons Stainless steel chamber, 18" long x 15.75" diameter jacketed on bottom half of mixing chamber and insulated Top hinged lid with gasket, 9" x 10" 3.25" flush mount bottom outlet, manual lever Opening ...more
Paint and Powder Accessories
1 Result
Paint shaker, Red Devil #5100, 1 gallon, 1/4 HP, 1 phase, serial #007849
Category: Paint and Powder Accessories
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Red Devil
Model: PAINT SHAKER
one(1) used 1 gallon Red Devil Paint Shaker. Model 5100 Serial number 007849 1/4 hp, single phase. Test run and video made.
Parts for Mixers and Blenders
5 Results
1" diameter x 34.5" long stainless, (2) 4" saw tooth blades, mounting coupling, 3" boat prop blade, D-cut shaft end
Category: Parts for Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: 1" Diameter X 34.5" Long Stainless
one(1) new 1" diameter Stainless Steel Shaft, 34.5" long Includes two brand new 4" saw tooth Blades with mounting coupling Includes 3" boat prop propeller blade End of shaft is D-cut (has a flat spot for mounting pulley.
Ingalls Process Equipment has 4 more
listings in Parts for Mixers and Blenders.
Cole Parmer #7575-10, Masterflex L/S Peristaltic Pump, 0.1 HP, 600 RPM, digital read out
Category: Peristaltic Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Cole Parmer
Model: 7575-10
one(1) used Cole Parmer Masterflex L/S Peristaltic pump Drive Model no. 7575-10 Variable speed unit, Rated 0.1 - 600 rpm 0.1 hp Digital readout, touchpad controls a Masterflex Easy-Load II Pump Head USE: 15, 24, 35, 36 tubing Pump head no. 77200-62 Unit has been test run - video available.
Sturtevant #3B, Simpactor Pin Mill, 16" grinding chamber diameter, 10 HP, 6" inlet/outlet, two-part rotating disc, 230/460 Volt, 3PH
Category: Pin Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sturtevant
Model: 3B
one(1) used Sturtevant Simpactor Pin Mill Model 3B Serial number 668 Approx. 16" diameter chamber 2 part rotating disc. 10 hp belt driven motor, with belt guard 3 phase, 230/460 voltage with 6" x 6" flanged inlet 6" round flanged outlet.
Planetary Mixers and Blenders
1 Result
2.5 gallon Hobart #C100T, 10 qt mixer, 3 speeds, 10" dia. x 8-7/8"deep Stainless steel bowl, .25 HP
Category: Planetary Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Hobart
Model: C100T
one(1) used Hobart Mixer Model C100T Serial number 11-273-078 Mixing capacity 10 qt Single phase, 115 volts, 1/4 hp three speeds with timer(which we did not check to see if it works) stainless steel bowl, 10" diameter x 8 7/8" deep with mixing blade test ran good, video available 26.5" tall.
Plastic and Rubber Hoppers
1 Result
Protectoplas, Plastic Feed Hopper, 22.75" diameter x 29" tall, Open top, cone bottom, 2.75" CBO, 7.5" four bolt flange
Category: Plastic and Rubber Hoppers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Protectoplas
one(1) used Plastic Feed Hopper Made by Protectoplas Co. 22.75" diameter x 29" tall. Open top, cone bottom 2.75" center bottom outlet. Outlet has a 7.5" four bolt flange.
Plate and Frame Filter Presses
3 Results
18" Sperry, 18" x 18" x 1" thick plates stainless steel filter Press, 18 plates, 17 frames, 2 end plates, 2.36 cu.ft. cake capacity
Category: Plate and Frame Filter Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sperry
One(1) used Sperry filter Press Model: 37 Serial: 53894 Cast stainless steel 18" x 18" x 1" thick plates 18 plates, 17 frames, and 2 end plates 2.36 cu. ft. cake capacity 72.6 sq. ft. filter area Overall dimensions: 8' 2" long x 2' 6" wide x 3' 7" high.
Ingalls Process Equipment has 2 more
listings in Plate and Frame Filter Presses.
Polishers (Including Buffing Jacks)
3 Results
Buehler #Ecomet-III, polishing grinding wheel, with wheel cover, 5 amps, 115 V., single phase
Category: Polishers (Including Buffing Jacks)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Buehler
Model: ECOMET-III
one(1) used Buehler Ecomet III Polishing Grinding Wheel Model Ecomet III Cat. No. 49-1650-160 Serial number 365-ECH-3001 Single phase, 115 voltage, 5 amps with controls, on off variable speed dial, water dial wheel cover Test ran good, video available.
Ingalls Process Equipment has 2 more
listings in Polishers (Including Buffing Jacks).
Portable and Tow-Behind Heaters
1 Result
Watlow electric duct heater, 81 KW, 240 V., 3 phase, new surplus
Category: Portable and Tow-Behind Heaters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Watlow
New Surplus - One (1) 81 kW Watlow Electric Duct Heater D54SX3S 1441 81 kW, 240V, 3 phase Heating dimensions: 9" x 19" Mounting flange: 12" x 22.5".
APV #R6R, 3" Gear Pump, 2" discharge, Stainless Steel housing, pump, No drive, Serial #H3922
Category: Positive Displacement Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Apv
Model: R6R
one(1) used APV Gear Pump. Model R6R Serial number H3922 stainless steel housing. This is a 3" diameter pump, with 2" reducers welded onto the pump. On a stainless steel cart with casters. No drive.
Ingalls Process Equipment has 4 more
listings in Positive Displacement Pumps.
220 Ton, Bussmann Simetag #HPM200S, hydraulic compacting press, 19.6"stroke, opposed ram design
Category: Powdered Metal Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bussmann
Model: HPM200S
One (1) used Bussman Simetag Hydaulic Compacting Press Model HPM 200S 220 ton Powder Compacting Press Serial number M1703 3 phase, 60 hertz, 460 voltage Operating manual with drawings Approx. floor space 6' x 8.5" deep x 11'10" This press s the following: Opposed ram design Die set 7.8" lower ...more
TB Woods #WFC-4002-OC, AC inverter, 2 HP, 460 Volts, type 4X
Category: Power Inverters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Tb Woods
Model: WFC-4002-OC
one(1) used 2 hp TB Woods AC Inverter. Model WFC 4002-OC Type 4X indoor use only. 2 hp 460 voltage, 3 phase. Price is for inverter only. If you would like the motor and cart add additional $100.
Ingalls Process Equipment has 1 more
listing in Power Inverters.
Power Supplies - Miscellaneous
1 Result
Curlee, electrical box for hazardous location, cast aluminum, sight glass on top hinged door
Category: Power Supplies - Miscellaneous
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Curlee
Model: ELECTRICAL BOX FOR HAZARDOUS LOCATION
one(1) unused Curlee Mfg. Electrical Box for Hazardous Location cast aluminum. Certified for Hazardous Location. Cat. no. C-CSEW- 161812. Class I, Div. 1 & 2, Groups C & D, Exp. Proof. Class II, Div. 1 & 2, Group E,F, & G, Dust Ignition Proof. Class III, Div. 1 & 2. Inside dimensions: 16" L-R ...more
Pressurized Carbon Steel Tanks
4 Results
15 gallon 19" x 14", Heavy duty Carbon Steel tank, open top, flat bottom, no bottom outlet, 2-side lifting lugs
Category: Pressurized Carbon Steel Tanks
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used 15 gallon Mix Tank 19" inside diameter x 14" deep Heavy Duty carbon steel open top, flat bottom no bottom outlet 2 side lifting lugs.
Ingalls Process Equipment has 3 more
listings in Pressurized Carbon Steel Tanks.
Processors, Producers, Compounders
1 Result
Carman Industries, tumble tube processor, Stainless steel, 42" OD x 112.25" L tube, 7.5 HP, 2012
Category: Processors, Producers, Compounders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Carman
Year: 2012
one(1) used Carman Industries Tumble Tube Processor Serial number TT-14740 Shop order no. 17264 stainless steel tube: 3'6" OD, x 9'4.25" long Overall length: 11' 3.75" long Dishcarge height: 3' 3.5" 7.5 hp motor, 3 phase, 230/460 voltage last used to dust pellets coming off a ...more
1.5" inlet, Moyno, Progressive Cavity Pump, Type 1L3 CDQ, Trim AAA, 1.5 HP variable drive, 230/460 V.
Category: Progressive Cavity Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Moyno
one(1) used 1.5" Moyno Progressive Cavity Pump. Type 1L3 CDQ, Trim AAA. Serial number 19026-1. 1.5 hp US Motors Vari drive. 230/460 voltage. 1.5" inlet flanged All mounted on a steel base with casters.6642.
Pulverizers and Hammermills
12 Results
American Pulverizer Co. #L, hammermill, 4 swinging hammers, 11" x9.25" feed throat, 5 HP
Category: Pulverizers and Hammermills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: American
Model: L
One (1) used 15 x 9 Hammermill Made by American Pulverizer Company Type L Serial number 5682 Four (4) swinging hammers Outboard roller bearings Opening at feed throat is 11" x 9.25" wide 5 HP belt driven motor, variable speed 3 phase, 230/460 voltage All mounted to a steel base belt guard Chamber is bolt in ...more
Ingalls Process Equipment has 11 more
listings in Pulverizers and Hammermills.
Pallet of Vacuum Pumps, 4 pumps
Category: Pump Parts
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) pallet of used Vacuum Pumps. one(1) used Stokes Vacuum pump. Model 148H-10, Serial number CC 81852. 2 hp, 230/460 volt. one(1) used Kinney Vacuum pump. Model XC 8, Serial number 2296C7. 1/2 hp, 220/440 volt. one(1) used Kinney Vacuum pump. Model KC-15, Serial number 827H5182-33. 1 hp, single phase 115/230 volt. ...more
CM, high temperature laboratory pusher, 3" wide x 2.75" high inlet/outlet opening, (3) 2.75" x 12.75" long hearth boats, control panel
Category: Pusher Type Furnaces
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: High Temperature Laboratory Pusher
one(1) used CM High Temperature Lab Furnace Inlet and outlet opening: 3" wide x 2.75" high Boats are 2.75" wide x 12.75" long, 3 available Inlet to outlet is 9', overall length of furnace 11' 1.5" Includes full control panel. Overall dims.: 40" wide x 11' 1.5" long x ...more
Pallet racking, 42" wide, 8' 6" beams, sells as a lot or in sections
Category: Racks and Shelving
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: PALLET RACKING
one(1) lot of used Pallet Racking Able to be split up Uprights: 30 (6) 16' tall x 42" wide Tear Drop (2) 20' tall x 41.5" wide Tear Drop (5) 30' tall x 42" wide Tear Drop (6) 15'8" tall x 41.5" wide Paltier Racking (5) 20' tall x 41.5" wide Paltier Racking (2) ...more
Reactors
8 Results
100 gallon Imperial Steel Tank Co., Stainless Steel reactor body, 30" dia. x 30" straight wall, 25/100 psi, jacketed
Category: Reactors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Imperial
One (1) used 100 gallon Stainless Steel Reactor Body Mfgd. by Imperial Steel Tank Co. National Board number: 1791, Serial number: 1.S.T. 1791 30" diameter x 30" straight wall Tank: 316 stainless steel Jacket: 304 stainless steel Dish top and dish bottom Internal rated for 25 psi and full vacuum at 300 F ...more
Ingalls Process Equipment has 7 more
listings in Reactors.
2379 psig, Aplex Industries #MA-75M, quintuplex pump, 50 HP, 1.375"plunger diameter, 2008
Category: Reciprocating Plunger Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Aplex Industries
Year: 2008
One (1) used 50 HP Aplex Industries Quintuplex Pump Model: MA-75M Built: 2008 Serial number: 0671 50 HP belt driven with guard, 3 phase, 208-230/460 voltage Max rated HP: 75 @ 550 RPM Plunger diameter: 1.375" Max Rated Discharge Pressure: 2379 psi Max Rated Plunger Load: 3535 lbs. Displacement: 0.0834 ...more
Ribbon Mixers and Blenders
1 Result
20 cu.ft. Robinson Mill Builders, double ribbon blender,size 4,Stainless Steel ribbon,carbon steel trough, 7.5 HP
Category: Ribbon Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Robinson Mill Buiilders
One (1) used 20 cu. ft. Double Ribbon Blender Made by Robinson Mfg Mill Builders Size: 4 Serial number: 1131 Trough dimensions: 2' x 6' Stainless steel ribbon Carbon steel trough 7.5 HP motor, gear reduced drive, 440V only, 3 phase All mounted on a steel stand Test ran well, video available.
Right Angle Gear Increasers and Reducers
1 Result
.5 HP @ 1380 RPM, SEW Eurodrive type DFT71DTBMG05HR, Right Angle, AC, Gear Reduced Motor, 230/400 Volts, 3.7 torque, new
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Sew
one (1) new SEW Eurodrive gear reduced motor Right Angle AC Motor Tag: 1/2HP, 230/400Volts, 1380rpm, 3.7 torque, 230Volt Brake TEFC, 3 Phase, Type - DFT71DTBMG05HR Gear Reducer: In - 1380 RPM, Out - 12 RPM, Torque - 1646 lbs/in.
4" x 8" Keith Machinery, 3 roll mill, adjust brass end guides, start/stop buttons
Category: Roll Mills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Keith
Stock Number: 4788, 4" x 8" Keith Machinery Three Roll Mill, /Spec Sheet:, One (1) used 4" x 8" Three Roll Mill Manufactured by Keith Machinery Serial number: 11206 Rolls: 4" x 8" long Adjustable brass end guides Safety cable emergency stop Cored rolls for cooling Apron knife for discharge Start/stop buttons Test run ...more
Ingalls Process Equipment has 2 more
listings in Roll Mills.
48" wide x 4' long, Lewco, heavy duty roller conveyor w/no gaps, w/Sterling scale
Category: Roller Type Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Lewco
One (1) used 48" x 48" Lewco Roller Conveyor Rollers are 2.5" in diameter x 44" long Heavy duty roller conveyor with no gaps Sterling scale included, readout sold separately 5000 pound capacity.
Rotary Calciners
2 Results
6" x 120" Inconel rotary calciner/ rotary kiln tubes, 1/4" wall thickness, 2400°F, 3" discharge (2 available)
Category: Rotary Calciners
Seller: Ingalls Process Equipment
Location: Painesville, OH
two(2) Inconel Rotary Calciner / Rotary Kiln Tubes Diameter: 6.5" O.D., 6" I.D. Overall length: 10 feet Material of construction: Inconel 1/4" wall thinkness They were built to be used in a Harper Gas Fired Calciner The calciner was rated for 2,400 F Feed end is open: 6" Discharge end has a 3" ...more
Ingalls Process Equipment has 1 more
listing in Rotary Calciners.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
Gardner Denver #EBE-FH-25 HP, Electro screw air compressor, cabinet style, 25 HP, air cooled, 480 V.
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Gardner Denver
Model: EBE-FH-25
One (1) used 25 HP Gardner Denver Electro-Screw Air Compressor Cabinet style Model: EBE_FH-25 HP Serial number: U75693 Control panel included Unit was running when removed from service Air cooled 3 phase, 480V Digital readout panel Hours: 29,895 Containment system on bottom Test run video available.
Rotary Vacuum and Pressure Filters
1 Result
12.6 sq.ft. Alar #Auto-Vac-220, rotary vacuum drum filter, 2' x 2' carbon steel drum, full Control panel
Category: Rotary Vacuum and Pressure Filters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Alar
Model: AUTO-VAC-220
One (1) used Alar Rotary Vacuum Drum Filter Model "Auto-Vac" 220 Serial number 9165 Drum: 2' x 2' long, carbon steel Rated for 12.6 sq ft. of nominal filter area Unit is mounted on a 6" heavy duty I-beam base a full control panel, mounted to base Includes 5 HP Atlantic Fluidics Vacuum Pump ...more
Rotary Valves (Airlock Valves)
16 Results
6" Flowtronics Inc., Rotary Airlock, 3/4 HP gear reduced drive, Chain and sprocket driven
Category: Rotary Valves (Airlock Valves)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Flowtronics
one(1) used Flowtronics Rotary Airlock 6" round inlet with hopper 3/4 hp gear reduced drive, 208-230/460 voltage. Chain and sprocket driven with chain guard. 6" bottom outlet with bolt on flange for pneumatic pipe line. 3" diam. Unit has been test run in our shop. On short legs. 600 lbs. with pallet.
Ingalls Process Equipment has 15 more
listings in Rotary Valves (Airlock Valves).
Rotary Vane Pumps (Not Vacuum)
1 Result
2.5" Viking #LQ4125, Gear Pump, on base with motor, 5 HP, Gear reducer 3-551-003, Ratio 4.19-1
Category: Rotary Vane Pumps (Not Vacuum)
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Viking
one(1) used 2 1/2" Viking Gear Pump on base with motor Model LQ4125 Serial Number 2239885 Viking Gear reducer 3-551-003, Ratio 4.19-1 5 hp motor, 3 phase, 230/460 voltage with XP tag Unit will be test in out shop.
350 cfm, FanAm #CAV-100, blower, 11" dia polypropylene housing, .5 HP, 3 phase, 208-230/460 V., 1725 RPM, 2007
Category: Rotary-Positive Blowers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Fanam
Model: CAV-100
Year: 2007
one(1) used 1/2 hp FanAm Inc Blower. Model CAV-100 Built 2007 Polypropylene housing, approx. 11" diameter 1/2 hp XP motor, 3 phase, 208-230/460 voltage. RPM- 1725. Rated CFM- up to 350 CFM Does not include the damper. Two others in stock.
Ingalls Process Equipment has 3 more
listings in Rotary-Positive Blowers.
1000 lb. Samson Samson scale, 2 lb sub divisions
Category: Scales
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Samson
One (1) used 1,000 lb Samson crane scale 1,000 lb capacity 2 lb subdivisions.
Ingalls Process Equipment has 5 more
listings in Scales.
Screens and Sifters
14 Results
8" W.S. W.s. Tyler #RX-8", Rotap-HDS sieve with double pan, single phase, 1/4 HP, with tapper
Category: Screens and Sifters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: W.s. Tyler
Model: RX-94
One(1) used W.S. Tyler Rotap Sieve, double pan Model: RX-94 Type: Rotap-HDS Serial: 0055 This unit handles two 8" screen sieves at the same time 1/4 hp single phase motor, 115/230V tapper With on/off and timer On heavy duty steel stand We will include one pan and 4 screens Test run video can be supplied prior to ...more
Ingalls Process Equipment has 13 more
listings in Screens and Sifters.
Sealers and Sealing Systems
1 Result
Enercon #LM2534-1, Induction Capacity Sealer, L1 kW, Hand held coil, 115 volts, .35 gpm minimum, 28-89 mm plactic caps
Category: Sealers and Sealing Systems
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Enercon
Model: LM2534-1
one(1) used Enercon Induction Cap Sealer. Model LM2534-1. Serial Number 72978-1. Rating 1 kw. Hand held coil. Input power: single phase, 115 volts. Water cooled:.35 gpm minimum. Sealing head: 28-89 mm plactic caps.
Sigma Mixers and Blenders
1 Result
5 gallon Double arm sigma blade mixer, Stainless Steel, jacketed, 5 HP, 15-3/4" x 12" x 13" mixing bowl
Category: Sigma Mixers and Blenders
Seller: Ingalls Process Equipment
Location: Painesville, OH
on(1) used 5 gallon J.H. Day Double Arm Sigma Blade Mixer 5 gallon working capacity, 7.5 gallon total Polished stainless steel bowl with Double Arm Sigma Blades, overlapping blades 15 3/4" x 12" F-B, 13" deep mixing bowl 15 3/4" x 12" F-B, 13" deep mixing bowl Both Bowl and the jacket are ...more
Spray Dryers
3 Results
Bowen #1-Tower, pilot plant tower spray dryer, 30" dia., 2 nozzles, gas fired w/gas train, cone bottom
Category: Spray Dryers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Bowen
Model: 1-TOWER
One (1) used Bowen Pilot Plant Tower Spray Dryer Model: #1 Tower 30" diameter 2 nozzles Gas fired, with gas train Cone bottom Rated for up to 80 lbs per hour.
Ingalls Process Equipment has 2 more
listings in Spray Dryers.
Squirrel Cage AC Electric Motor
75 Results
.16 HP 1140 RPM General Electric, Frame 48, single phase, 115 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: General Electric
Frame: 48
One (1) used Electric 1/6 hp Electric Motor Single Phase 60 Hz 115 Volt 1140 rpm Frame 48 Cat. # H118 Serial # WKL200516.
Ingalls Process Equipment has 74 more
listings in Squirrel Cage AC Electric Motor.
Stainless Steel Tanks and Vessels
18 Results
35 gallon United Untensils Co., Stainless steel mix tank, 18" dia., 30" straight wall, dish top, slight cone bottom, 1985
Category: Stainless Steel Tanks and Vessels
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: United
Year: 1985
one(1) used 35 gallon United Untensils Co. Inc. 18" diameter, 30" straight wall. T-304 stainless steel. Dish top with center mount flanged mounted agitator.3 hp Lightnin, 208-230/460 voltage. 1725/1425 rpm. Top inlets: 4", (3) 1.25" all threaded. Slight cone bottom, 2" Center bottom outlet. on legs. Model EVT-30 ...more
Ingalls Process Equipment has 17 more
listings in Stainless Steel Tanks and Vessels.
Stainless, Brass, Hastelloy, Monel, Nickel, Titanium Pumps
1 Result
Graco #Bulldog, Piston Pump, stainless steel, 1.5" inlet, 2" outlet, Air operated, On cart with casters
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: GRACO #BULLDOG
one(1) used Graco "Bulldog" Piston Pump. Bulldog Silencer. 1.5" inlet, 2" outlet. Stainless steel. Air operated. On cart with casters.
Strapping Machines and Case Tapers
1 Result
Dynaric #AM-80C-SP, Strapping Machine, yellow, 440 volts, On casters, with controls
Category: Strapping Machines and Case Tapers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Dynaric
Model: AM-80C-SP
one(1) used Dynaric Strapping Machine. Model AM -80C SP. Serial number 94326301 440 voltage, 3 phase. On casters. With controls.
Table Top Conveyor
Category: Table Top Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Tooling and Accessories - Miscellaneous
6 Results
Vacuum drawdown table, Gardco, 12' x 18" long, hard aluminum, single port w/valve
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Gardco
oe(1) used Gardco Vacuum Drawdown Table 12" x 18" long Hard Aluminum Single port with valve Black Anodization provides corrosion resistance.
Ingalls Process Equipment has 5 more
listings in Tooling and Accessories - Miscellaneous.
Applied Test Systems, Lab Tube Furnace, 45" tube length, 1-5/8" ID, 3-1/8" outside dimension, 1/15 HP, 5020 watt, 1200°F, 2006
Category: Tube Furnaces
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Applied Test Systems
Model: APPLIED TEST SYSTEMS
One (1) used Applied Test Systems Lab Rotary Tube Furnace Series 3210 5020 Watts 230 Volts Max Temperature Rating: 1200 F (900 C) Built: 7/2006 Tube Length: 45" Inlet Diameter: 1 5/8" Outlet Diameter: 3 1/8" Tube is 1 5/8" x 15" long then 3 1/8" x 30" long The tube is larger starting ...more
Ingalls Process Equipment has 2 more
listings in Tube Furnaces.
Double drum tumbler, includes strap to secure drums, with gear reduced drive
Category: Tumbling Barrels
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) used Double Drum Tumbler Includes straps to secure drums gear reduced drive 9'8" x 3' x 3'9" tall.
Turbo-centrifugal Blowers
1 Result
AAF #K, Blower, 10 HP, V-belt driven, 10" inlet, 8" x 10" outlet, 208/230/460 V.
Category: Turbo-centrifugal Blowers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: American Air Filter
Model: K
one(1) used AAF Blower. 10 hp, V-belt driven. 10" inlet, 8" x 10" outlet. 208/230/460 voltage. Product: K Exhauster. Style: 1250273-17.
Twin Shell (V-type) Mixers and Blenders
1 Result
10 cu.ft. Brighton, Twin Shell Blender/Cooker, stainless steel
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Brighton
One (1) used 10 cu ft Brighton Twin Shell Blender/Cooker Manufactured by Hamilton Kettles, division of Brighton Corp Stainless steel construction Very heavy duty shell and bearings National board stamped Max Working Pressure: 50 psi and full vacuum @ 300 F Last used to introduce steam into product Complete on stand ...more
Labconco desicator / vacuum chamber, with shelves, hinged front door w/latch
Category: Vacuum Chambers
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used Labconco Desicator / Vacuum Chamber Cat. no. 5530000 one(1) cubic foot molded fiberglass cabinet Drying or storing of moisture sensitive materials 17" x 13.5" x 14.75" shelves hinged front door with latch.
Ingalls Process Equipment has 1 more
listing in Vacuum Chambers.
100 CFM, Intervac Corp #PL-41/5C/RA, Vacuum Pump, liquid ring, 7.5 HP, Serial #C7938
Category: Vacuum Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Intervac
Model: PL-41/5C/RA
one(1) used 7.5 hp Intervac Corp. Vacuum Pump. Model PL 41/5C/RA, Serial number C7938. Rated 100 CFM, Liquid ring type. On steel base, pump is coupled to 7.5 hp motor. Reliance Motor, Frame 213T, 230/460 voltage, 26/13 amps. We have test run the unit in our shop.
Ingalls Process Equipment has 9 more
listings in Vacuum Pumps.
Variable Speed Motors (Adjustable Speed)
1 Result
2 HP 855/870 RPM BEST Best Process Solutions BE-4400-8B, vibratory motor, 230/460 Volts
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Best Process Solutions
One (1) refurbished vibratory motor Model: BE-4400-8B Serial number: US5X050008 Distributed by B.E.S.T (Bulk Equipment Systems Technology) Process Solutions 2 HP, 230/460V, 3 phase, 7.5/4.4 Amps 855/870 RPM Max Force: 4400 lbs. (currently set to 70%).
Versators
1 Result
Cornell #D-16, Versator, 7.5 HP varidrive, carbon steel construction, used
Category: Versators
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Cornell
Model: D-16
one(1) used Cornell Versator. Model D16, Serial number 9214 Carbon steel construction Removable front door. 7.5 hp Reeves Variable Speed drive. Includes Stokes Vacuum Pump, Model 148H-10 Stokes Vac. Pump a 2 hp motor. Includes A-B Push buttons for Versator and Vac. Pump. Some piping and plumbing included. Some brass ...more
Vibrating Screens
4 Results
24" Eriez #MS242, Vibratory Screener, separator sifter, stainless steel, anti blinding deck, single deck (2 spouts)
Category: Vibrating Screens
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Eriez
Model: MS242
one(1) used 24" Eriez Vibratory Sceener Sifter Seperator Model MS242, Style 60044 Serial number MM03/1216 stainless steel contact parts. Anti blinding deck with balls. single deck (2 spouts) 3 phase, 460 voltage, 1.7 amps. Test run in our shop, video available. Shipping weight with pallet - 570 lbs.
Ingalls Process Equipment has 3 more
listings in Vibrating Screens.
Vibratory Finishers
1 Result
Industrial Vibrator #US-38, unused
Category: Vibratory Finishers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Industrial Vibrator
Model: US-38
Welding Turntables
1 Result
5000 lb. Airfloat, Turntable, 4' x 4', Manual rotation
Category: Welding Turntables
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Airfloat
One (1) used Airfloat Turntable 4'x4' Manual rotation Capacity is estimated to be 5000 lb (to be confirmed) Two available Can be sold with a floor scale Turntable video: https://youtu.be/QrJnjrOxZ5k.
Wood Grinders and Hogs
1 Result
Mitts & Merrill #13CSE, Hog Grinder, 300 HP, 15" x 27" feed opening, 18 knives, outboard roller bearings
Category: Wood Grinders and Hogs
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Mitts & Merrill
Model: 13CSE
One (1) used Mitts & Merrill Hog Grinder Model 13CSE 15" x 27" feed opening 18 knives Discharge screen has 0.44" diameter holes outboard roller bearings Motor: 300 HP, 460 voltage, 3 phase, 1180 RPM direct coupled a motor starter: Size 6 a Square D disconnect.
Wrapping Machines (including Shrink Wrappers)
1 Result
International International Packaging, stretch wrapper, 48" rotating table, electronic eye
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: International Packaging
one(1) used Stretch Wrapper Made by International Packaging Machinery test ran good 48" rotating table, 9.75" off the floor complete with control panel Single Phase, 115 voltage. Electronic eye 74.5" tall, 106" long x 48" wide 95" tall when the carriage is in the up posiition runs good: ...more
