Icon Industries, Inc
Grand Rapids, MI 49507-1715
Platinum Level Dealer
Surplus Record Dealer Since 1990
Contact
Tom,Pete,Bob
About
Icon Industries. Inc, has been supplying machinery to manufacturers since 1982, taking pride in the fact that many of their sales are repeat customers. Specializing in hydraulic presses that are available as-is or modified/refurbished per the customer's requirements. Icon's inventory alsoincludes a wide variety of machinery related to molding/forming. Icon has 80,000 sq.ft. of storage and shop facilities in western Michigan.
Products & Services
- Furnaces & Ovens
- Hydraulic/Fluid Equipment
- Injection Molding Machinery
- Jig Borers/Grinders
- Lasers
- Plant Liquidations
- Plastic Equipment
- Presses
- Pumps
- Rubber Machinery
Associations & Affiliations
648 listings in 42 categories
Greer #30-A, accumulator, 2.5 Gallon, Bladder (qty)
Category: Accumulators
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Greer
Model: 30A
MODEL 30A 2 \u00bd. BLADDER TYPE WITH MOUNTING BRACKET. QTY AVAILABLE (#714).
Accumulator, 5 Gallon (qty 4)
Category: Accumulators
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OIL-AIR MODEL 5-100-3. BLADDER TYPE. 5 GALLON. RATED TO 3000 PSI. QTY 4. ITEM #2103.
Accumulator, 5 Gallon
Category: Accumulators
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
NACOL (WILKES AND MCCLEAN) MODEL N210-20A BLADDER TYPE. 3000 PSI. MAX FLOW IN AND OUT IS 159 GPM. 2" NPT PORT. APPROX OVERALL DIMENSIONS: 32" X 11". 200 POUNDS. ITEM #1834.
Air and Hydraulic Cylinders
13 Results
1.5" Bore cylinder w/power unit, 24" stroke, 1000 psi, 1/2 HP Oildyne hydraulic unit, 115/230V., #2398
Category: Air and Hydraulic Cylinders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
DELAWARE HYDRAULICS T.J. CYLINDER: 1.5" BORE; 1" DIA ROD; 24" MAX STROKE; RATED TO 1000 PSI; DOUBLE-ACTING; \u00bd NPT PORTS. \u00bd H.P. HYDRAULIC UNIT: 115/230 VOLT; SINGLE-PHASE. OILDYNE PUMP: 30C10-122-NVSD 633600 12/83. D03 DIRECTIONAL VALVE. MOTOR STARTER WITH ON/OFF BUTTONS. CYLINDER RETRACTED IS APPROX 31". ...more
2" Bore cylinder w/power unit, 22" stroke, 1350 psi, 1/2 HP hydraulic unit, 115/230V., 1ph, #2396
Category: Air and Hydraulic Cylinders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
ORTMAN CYLINDER: 2" BORE; 1.375" DIA ROD; 22" MAX STROKE; RATED TO 1350 PSI; DOUBLE-ACTING; \u00bd" NPT PORTS; MALE THREAD ON ROD END. \u00bd H.P. HYDRAULIC UNIT: 115/208/230 VOLT; SINGLE-PHASE. PUMP: 12292 1300217 CC8120C00 D90. D03 DIRECTIONAL VALVE CYLINDER RETRACTED IS APPROX 30". APPROX 100 POUNDS. ITEM #2396.
3.25" Bore, 3.25 HHFF20K, 2" rod, 20" stroke, 2000 psi, front flange mount, #798 (2 available)
Category: Air and Hydraulic Cylinders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
3 \u00bc" BORE; 20" STROKE; 2 \u00bd" ROD DIAMETER. MODEL 3.25 HHFF20K; SERIAL #767660. FEMALE ROD END WITH 1 \u00bd" THREADED STUD 14" LONG. 5" X 5" REMOVABLE BLOCK ON END OF ROD. \u00be" NPT PORTS. MFI FRONT FLANGE MOUNT. (QTY 2) (ITEM #798).
3.25" Bore, Double Rod End, Parker, 64.25" stroke, 2" dia.male end rod, #2069
Category: Air and Hydraulic Cylinders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
PARKER MODEL #3.25KFP2HLTS28A/28AX64.250. SERIAL #KK213752B. 3.25" BORE. 64.25" STROKE. ROD IS 2" DIAMETER WITH MALE END. SIDE TAPPED MS4 MOUNTS. LIP-SEAL PISTON. -16 SAE PORTS IN POSITION 4. RATED TO 3000 PSI. QTY 3 (ONE WITH A BROKEN ROD). OVERALL DIMENSIONS: APPROX 144" LONG. ITEM #2069.
4" Bore, Miller, 5" stroke, double acting, 3000 psi, 1.75" dia.rod, rear flange, #2408 (2 available)
Category: Air and Hydraulic Cylinders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Miller
MILLER HYDRAULIC CYLINDER: 4" BORE; 5" STROKE; DOUBLE-ACTING; 3000 PSI; 1.75" DIAMETER ROD. FEMALE THREAD ON ROD END (APPROX 1.125" DIA). APPROX 2.75" OF ROD STICKS OUT WHEN RETRACTED. OVERALL LENGTH WHEN RETRACTED IS APPROX 16". REAR FLANGE IS APPPROX 7.5" X 5". QTY 2. ITEM #2408.
Icon Industries, Inc has 8 more
listings in Air and Hydraulic Cylinders.
Air Cooler Type Heat Exchangers
1 Result
Dunham-Bush #DB-221, air type heat exchanger, 12" dia fan,.25 HP, 1800 RPM, #2423
Category: Air Cooler Type Heat Exchangers
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Dunham-Bush
MODEL DB-221. SERIAL #14234. MOTOR:.25HP; 1800 RPM; 115V; 1 PH. APPROX 12" DIAMETER FAN. APPROX 24" X 20" X 20". ITEM #2423.
Autoclaves
2 Results
12" x 36" ID range, AAA Steam autoclave, QO door, 100 psi, 350°F, ASME, U certificate, quantity, #1188
Category: Autoclaves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Aaa
HORIZONTAL VESSEL RATEDTO 100 P.S.I. AND 350 F. HYDRAULICALLY ACTUATED QUICK OPEN CLAM SHELL TYPE CLAMP ON DOOR; HYDRAULIC SAFETY LOCK; HYDRAULIC CYLINDER MOUNTED TO DOOR FOR OPENING/CLOSING. DOOR SWINGS DOWN AND IS LIGHT ENOUGH TO BE HANDLED MANUALLY. 36" LENGTH IS THE STRAIGHT WALL LENGTH; THE CONCAVE RADII OF THE ...more
39.5" x 26" ICOS #AV/S-P601, medical steam sterilizer-autoclave, never used, 45 psi, 300°F, #2591
Category: Autoclaves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Icos
ICOS (ITALY) MODEL AV/S-P601. FACTORY #1096/8292. PROJECT #07000505. NEW IN 2008-NEVER USED!! RATED TO APPROX 45 PSI AT 300F. CHAMBER OPENING APPROX 26" X 26"; DEPTH OF 39.5" AND DIAMETER OF 35". OPERATOR HEIGHT APPROX 43.5". PASS-THROUGH SYSTEM (SLIDING DOORS FRONT AND REAR). CHAMBER IS 316 LSS. JACKET IS 304 SS. ...more
5.5" wide x 7.75' long, rubber belt, raised cleats on 4" centers, full support, aluminum construction
Category: Belt Conveyors
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
5.5 " WIDE X 93" LONG RUBBER BELT WITH RAISED CLEATS ON 4" CENTERS. FULL SUPPORT UNDER BELT. FLAT PART OF 5.5BELT IS APPROX 62" LONG WITH INCLINED SECTION APPROX 26" LONG. ALL ALUMINUM CONSTRUCTION. SMALL D.C. DRIVE MOTOR. REMOVABLE LEXAN DIVIDER ON TOP OF FLAT BELT. OVERALL DIMENSIONS: 96" X 12" X 21" TALL. ITEM #1806.
C Frame Hydraulic Press Machines (Gap Frame)
3 Results
4 Ton, Down-acting press, C-frame, air, 10" stroke, 15" daylight, (2) 19" x20" moving bolsters, #725
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
TWO MOVING BOLSTERS: 19" L TO R X 20" F TO B EACH. BED: 56" L TO R X 25" F TO B. TWO 6" BORE, 10" STROKE, 1 \u00be" ROD CYLINDERS. 2 TONS EACH AT 150 PSI. 15" DAYLIGHT; 10" STROKE. MOVING BOLSTERS GUIDED WITH 2" DIAMETER POST WITH 2" LONG BUSHINGS. 43 \u00bd" OPERATOR HEIGHT. 110 VOLT CONTROL PANEL AND PNEUMATIC ...more
90 Ton, Cincinnati, C-frame, 108" x48", down act, 72" daylight, 36" stroke, RIM clamp, #1225 (2 available)
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Cincinnati
CINCINNATI. NEW APPROX 1980. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE-ACTING CLAMP CYLINDERS: 6" BORE; 2.5" ROD; 1.25" PORTS. APPROX 72" DAYLIGHT; 36" STROKE AND 36" OPERATOR HEIGHT. FULLY GUIDED WITH 19" BUSHINGS ON FOUR 8" DIAMETER POSTS. TWO BOOKING CYLINDERS TOP AND TWO BOTTOM: 4" BORE; 3" ROD; ...more
125 Ton, Cincinnati, 108" x48", C-frame, 90" daylight, 54" stroke, 36" work height, optional booking, #1228
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Cincinnati
CINCINNATI. NEW APPROX 1987. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE- ACTING CLAMP CYLINDERS: 7" BORE; 4" ROD; 2" FOUR BOLT FLANGE. APPROX. 90" DAYLIGHT; 54" STROKE AND 36" OPERATOR HEIGHT. FULLY GUIDED WITH 19" BUSHINGS ON FOUR 8" DIAMETER POSTS. TWO BOOKING CYLINDERS TOP AND TWO BOTTOM: 4.5" ...more
8" width x 8" D Precision, electric, 500° F, 115/230 VAC, 1200 watt, 11/5 amps, #1125
Category: Cabinet Type Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Precision
SERIAL #504-657. CAT. #31402. TEMPERATURE TO 260\u00baC. 115/230 VOLTS. AC. 1200 WATTS. AMP 11/5. (ITEM #1125).
9" width x 18" D Precision, electric, 350°F, 115 V., 1 phase, 1200 watt, 10.5 amps, #1095
Category: Cabinet Type Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Precision
SERIAL #510-596. CAT. NO. 1404 TO 180\u00baC. 115 VOLT, 1200 WATTS, 10.5 AMPS, 1 PHASE. (ITEM #1095).
10" width x 14" H x 10" ID Hotpack #35738, rated to 400°F, vacuum ports, #2562
Category: Cabinet Type Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hotpack
Model: 35738
MODEL 35738. 400 F. TEMPERATURE DIAL. VACUUM PORTS. ON/OFF SWITCH. TEMP LAMP. OVERALL APPROX DIMENSIONS: 22" X 24" X 32" TALL. APPROX 120 POUNDS. ITEM #2562.
12" width x 12" H x 19" D Napco #5851, electric, 482°F, 110 V., 1000 watt, vacuum post, #1012
Category: Cabinet Type Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Napco
Model: 5851
MODEL #5851. SERIAL #L50-6. 110 VOLTS, 1000 WATTS, VACUUM PORT. PART #C-93266 MLR-1990. MISSING CONTROL KNOB. APPROX. 250\u00baC (482\u00baF). OUTSIDE DIMENSIONS: 26" X 18" X 24" H. (ITEM #1012).
16" width x 15" H x 14" D Central Scientific #95405X, 220 V., 60 cycles, 5.5 amps, #1020
Category: Cabinet Type Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Central
Model: 95405X
CAT. NO. 95405X. SERIAL #306. 220VOLTS, 60 CYCLES, 5.5 AMPS. (ITEM #1020).
Icon Industries, Inc has 8 more
listings in Cabinet Type Ovens.
Peerless #8196 MTP, 2x3x8m, single-stg, 30 HP (3600 RPM; 230/460V), 8 max.imp, #2464
Category: Centrifugal Pumps
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Peerless
Model: 8196
MODEL #8196 MTP. SIZE: 2 X 3 X 8M. IMP MAX: 8. SINGLE-STAGE. APPROX 200 GPM (?). HEAVY DUTY. MUELLER DUPLEX STRAINER/FILTER MODEL 791FAH (SIZE 3; BODY CI; TAG #24230). RELIANCE 30 HP MOTOR (3600 RPM; 230/460V). ITEM #2464.
Sundstrand Sunflo #P2-ENP, single stage high head, 2" inlet, 1.5" outlet, #1511
Category: Centrifugal Pumps
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sundstrand
Model: P2-ENP
SUNSTRAND SUNFLO. MODEL # P2-ENP. SERIAL # 92448592. CENTRIFUGAL SINGLE STAGE HIGH HEAD FOR LONG DISTANCE PUSH. WILL HANDLE "THICK" LIQUIDS. 2" NPT INLET; 1.5" NPT OUTLET. 1.5" DIAMETER KEYED SHAFT WITH A COUPLER. SIGHT-GLASS. OVERALL DIMENSIONS: 16" X 24" X 17" TALL. (ITEM #1511).
1" Sinclair Collins #C284-2005, control valves
Category: Control Valves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sinclair Collins
Model: C284-2005
MODEL C284-2005. APPROX 1" PORTS. ITEM #2461.
1" Sinclair Collins #C284-2006, control valve, #2462 (2 available)
Category: Control Valves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sinclair Collins
Model: C284-2006
MODEL C284-2006. APPROX 1" PORTS. QTY 2. ITEM #2462.
1" Sinclair Collins #C284-4005, control valve, #2458 (5 available)
Category: Control Valves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sinclair Collins
Model: C284-4005
MODEL C284-4005. APPROX 1" PORTS. QTY 5. ITEM #2458.
1.5" Sinclair Collins #C264-4014, control valve, #2460 (3 available)
Category: Control Valves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sinclair Collins
Model: C264-4014
MODEL C264-4014. APPROX 1.5" PORTS. QTY 3. ITEM #2460.
1.5" Sinclair Collins #C284-4006, control valve, #2459 (4 available)
Category: Control Valves
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sinclair Collins
Model: C284-4006
MODEL C284-4006. APPROX 1.5" PORTS. QTY 4. ITEM #2459.
Icon Industries, Inc has 1 more
listing in Control Valves.
Die Cutting Press Machines
3 Results
22 Ton, #G888, 16" x 16" traveling head, 58" x 16" table, 7.5" daylight (2 available)
Category: Die Cutting Press Machines
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: G888
MODEL G888; 20T-HS. TABLE SIZE IS APPROX 58" X 16"; OVERALL CLEARANCE L TO R IS 69". THE CUTTING HEAD/PLATEN IS 16" X 16". THE MAX DAYLIGHT IS APPROX 7.5" AND THE APPROXIMATE MIN DAYLIGHT (SHUT-HEIGHT) IS APPROX 3". NOTE: DAYLIGHT DIMENSIONS WILL BE REDUCED BASED ON THE THICKNESS OF THE CUTTING BOARD USED. THE MAX ...more
25 Ton, Hudson #F63HS, travelling head, 68x25" bed, 20x20" head, adj.stroke to 5.75", #2616
Category: Die Cutting Press Machines
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hudson
Model: F63HS
MODEL F-63-HS. SERIAL #700012379. BED IS APPROX 68" X 25". MOVING SLIDE IS APPROX 20" X 20". STROKE: APPROX 0"-5.75". DAYLIGHT MAX APPROX 7.75". OPERATOR HEIGHT APPROX 41.25". 220/440V (SET UP FOR 220V). 30 AMP DISCONNECT. OVERALL DIMENSIONS APPROX 88" X 36" X 85" TALL. APPROX 4,500 POUNDS. ITEM #2616.
100 Ton, Sandt #602, Flex-O-Matic, 60" x28", 6.5" DL, 4.5 stroke, 15 HP, 380 V., #2315
Category: Die Cutting Press Machines
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sandt
Model: 602
MODEL 602. MACHINE #71-296. FLEX-O-MATIC 2000. ELECTRO-HYDRAULIC BEAM CUTTING PRESS. MAX DAYLIGHT IS APPROX 6.5" (WITHOUT CUTTING BOARD). MAX STROKE IS APPROX 4.5". WORK HEIGHT IS APPROX 37". FREE-STANDING RELAY ELECTRICAL CONTROL PANEL. FREE-STANDING HYDRAULIC POWER UNIT: 11 KW MOTOR (APPROX 15 HP); 380 VOLT; 50 HZ; ...more
Die Tryout and Spotting Presses
1 Result
350 Ton, (175 Ton with current pump), 84" x 72", 100" DL, 60" stroke, 30 HP, 25' tall, #1941
Category: Die Tryout and Spotting Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
PRESS WAS SET UP WITH AN 84" X 48" X 3" T-SLOTTED PLATED ATTACHED TO THE SLIDE AND A 78" X 40" X 3" T-SLOTTED PLATE ON THE BED WHICH COULD BE MOVED IN AND OUT (WOULD REQUIRE SOME WORK TO MAKE SLIDE-OUT BED FUNCTIONAL). THE OVERALL BED SIZE IS 100" L TO R; THE DISTANCE FRONT TO BACK BETWEEN THE POSTS IS 54". NOMINAL ...more
L-shaped tank, 75 gallon, drip pan, (7) station DOS manifold w/relief valve, #2109
Category: Epoxy Lined Tanks
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
MISSING MOTOR AND PUMPS. SEVEN (7) STATION D05 MANIFOLD WITH A RELIEF VALVE; 3 SINGLE SOLENOID D05 VALVES; 1 SINGLE SOLENOID D03 VALVE. LEVEL/TEMP SWITCH IN-TANK. 75 GALLON L-SHAPED TANK IN A DRIP PAN. 460 VOLT MOTOR STARTER AND DISCONNECT (10 HP). APPROX OVERALL DIMENSIONS: 90" X 72" X 82" TALL. APPROX 1,200 POUNDS. ...more
American Industrial AC-25-3, heat exchanger air type, 300 psi, 1/6 HP, 4140 RPM, #2522
Category: Fans
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: American Industrial
AMERICAN INDUSTRIAL MODEL AC-25-3. RATED TO 300 PSI; 400 F. MOTOR: 1/6 HP; 230/460V; 4140 RPM. OVERALL DIMENSIONS: 30" X 18" X 30" HIGH. APPROX 250 POUNDS. ITEM #2522.
Dunham-Bush DB-208-1599, air cooler, 18" dia.fan, 150 psi, 1/3 HP, 1800 RPM, #2650
Category: Fans
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Dunham-Bush
MODEL DB-208-1599. MOTOR: 1/3 HP; 230/460 V; 3PH; 1800 RPM. RATED TO 150 PSI. APPROX 18" DIA FAN. OVERALL DIMENSIONS APPROX 22" X 22" X 17". APPROX 100 POUNDS. ITEM #2650.
Hayden ND-208-12, air type heat exchanger, 14" dia fan, .5 HP, 1.5" ports, #2424
Category: Fans
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hayden
MODEL ND-208-12. MOTOR:.5 HP; 208-460 VOLT. APPROX 14" DIAMETER FAN. APPROX 1.5" PORTS. APPROX 24" X 30" X 18". ITEM #2424.
Thermal Transfer A0-25, air type heat exchanger, 18" dia fan,.17 HP, 1200 RPM, #2422
Category: Fans
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Thermal Transfer
MODEL A0-25. RATED TO 400F. MOTOR:.17 HP; 1200 RPM; 208-230/460 VOLTS; 3 PH. APPROX 18" DIAMETER FAN. APPROX 1.5" PORTS. APPROX 28" X 25" X 23". ITEM #2422.
Filtration Settling Tank, 2 compartment, 1/2 HP, 1800 RPM, #530 (2 available)
Category: Filtration Systems
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: 530
TWO COMPARTMENT: ONE 13" X 21" X 13" TALL AND ONE 16" X 27" X 13" TALL. \u00bd HP, 1800 RPM, 208-230/460 VOLTS MOTOR/PUMP. PUROLATOR FILTER. OVERALL DIMENSIONS: 40" X 40" X 25" TALL. QTY. 2. (ITEM #530).
Floor Plates and Bed Plates
6 Results
24" x 24" x 2" Steel Plate
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
FOUR 0.75" DIAMETER THRU HOLES. APPROX 320 POUNDS. ITEM #2328.
24" x 24" x 2" Spacer Plate (2 available)
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
24" X 24" X 2. QTY 2. (ITEM #968).
25" x 25" x 1.75", Spacer Plates
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: SPACER PLATES
25" X 25" X 1 \u00be" THICK, EIGHT 5/8" THREADED HOLES. QTY 2.
30" x 24" x 2.25", T-slotted plate
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: T-SLOTTED PLATE
SIX 0.75" T-SLOTS 24" LONG. SIX MOUNTING HOLES. APPROX 400 POUNDS. QTY 2. ITEM #2623.
30.125" x 47.25" x 1.875" Spacer Plate
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
30.125" X 47.25" X 1.875". 96 TAPPED THROUGH.750 HOLES PER PLATE ON 4" CENTERS. QTY 2. (ITEM #965).
Icon Industries, Inc has 1 more
listing in Floor Plates and Bed Plates.
Heat Exchangers - Miscellaneous
3 Results
Kamui Sangyo LCD-63OF3-5-10, heat exchanger water type, water in out on end, #2574
Category: Heat Exchangers - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Kamui Sangyo
KAMUI SANGYO CO. LTD. MODEL #LCD-63OF3-5-10. MFG #60043. WATER IN & OUT ON END. OIL IN & OUT ON TOP. APPROX 38" LONG X 14". APPROX 300 POUNDS. ITEM #2574.
Thermal Transfer #EH-718-T, 2-pass, NPT connections, 150 psi tube, 500 psi shell, 250 psi
Category: Heat Exchangers - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Thermal Transfer
THERMAL TRANSFER MODEL EH-718-T. TWO PASS. NPT CONNECTIONS. TUBES: 150 PSI. SHELL 600 PSI. TEMP: 250 PSI. 21" X 6" X 9". APPROX 50 POUNDS. ITEM #2523.
Thermal Transfer #EK-1024-T-R, water type heat exchanger (oil cooler), 2 pass, #2629
Category: Heat Exchangers - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Thermal Transfer
THERMAL TRANSFER MODEL EK-1024-T-R. TWO-PASS. MAX OIL FLOW OF 32 GPM; MAX WATER FLOW OF 28 GPM. REMOVES APPROX 85 H.P. APPROX 28" X 7" X 12" TALL. APPROX 200 POUNDS. TESTED. ITEM #2629.
Heat Exchangers, Stainless Steel Shell & Tubes
1 Result
300 psi shell, 300 psi tube, Thermal Transfer #SSC-1248-2.5-6-0 150, heat exchanger water type, 316 Stainless Steel, #2436
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Thermal Transfer
THERMAL TRANSFER MODEL SSC-1248-2.5-6-0. 316 STAINLESS STEEL CONSTRUCTION. 300 PSI. 300F MAX TEMP. TUBES: 150 PSI. TUBE DIAMETER: 0.375". ONE PASS. 2" OIL PORTS (10" FROM ENDS). 2" WATER PORTS ON END CAPS. 6.5" O.D. OVERALL DIMENSIONS: APPROX 60" X 8" X 13" TALL. APPROX 250 POUNDS. ITEM #2436.
2 HP to 150 HP power units, used and refurbished, www.iconindustries.com
Category: Hydraulic Power Units
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
5 HP Parker gear pump, 9.4 GPM to 800 PSI, air cooler, 60 gallon tank, #2555 (2 available)
Category: Hydraulic Power Units
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Parker
5 HP MOTOR (1800 RPM; 208-230/460V). PARKER GEAR PUMP PZG2AR208S1/113S RATED AT 9.4 GPM TO 800 PSI. TWO PARKER DO5 DIRECTIONAL VALVES: D3W3CNYC5630XB042. PARKER RETURN FILTER MODEL RF41000PL25E999185 (ELEMENT #9326700). THERMAL TRANSFER AIR COOLER MODEL AOC 22-2-30 (300 PSI; 350F). ELECTRICAL DISCONNECT. DRIP PAN. ...more
5 HP Parker Pump, 7 GPM, 1000 psi, 20 gallon tank, #536
Category: Hydraulic Power Units
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Parker
1800 RPM, 230/460 VOLTS. PARKER PAVC 16 10 R2-10 PRESSURE COMPENSATED PISTON PUMP RATED AT 7.5 GPM TO 1000 PSI (MAXIMUM VOLUME STOP ON PUMP). PARKER DG4V3 SINGLE SOLENOID VALVE. AIR COOLER ON BACK OF MOTOR. RETURN LINE FILTER. 20 GALLON TANK. OVERALL DIMENSIONS: 36" X 26" X 34" TALL. QTY. 2. (ITEM #536).
5 HP Parker #D05, 7.5 gpm to 1000 psi, 25 gallon tank, some controls, #2320
Category: Hydraulic Power Units
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Parker
5 HP MOTOR (208-230/460 VOLTS; 1800 RPM; 3 PH). VICKERS PUMP: V21051B12S214 RATED TO 7.5 GPM AT 1000 PSI MAX. SINGLE SUB PLATE WITH RELIEF VALVE AND PARKER SINGLE SOLENOID D05 VALVE D3W1B4-14. APPROX 25 GALLON RESERVOIR WITH A SITE-GLASS. SOME CONTROLS: START/STOP; UP/DOWN. 480 VOLT DISCONNECT (TAGGED THAT THE SYSTEM ...more
5 HP Sunstrand Pump, 2000 psi, 35 gallon tank, #1459
Category: Hydraulic Power Units
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Sunstrand
BUILT BY FAUVER. 5HP; 1800 RPM; 230/460 VOLTS. MOTOR STARTER. SUNSTRAND PUMP: L-15-RBKY-PCX3XX-XX. VICKERS VALVE: DG4S4. DOUBLE A VALVE: F5C10A3. FILTER. FAUVER HEAT EXCHANGER ON MOTOR. 3000 PSI 5 GALLON GREER ACCUMULATOR. 2000 PSI GAUGE. 35 GALLON RESERVOIR. OVERALL DIMENSIONS: 36" X 30" X 44" TALL. APPROX 750 LBS. ...more
Icon Industries, Inc has 43 more
listings in Hydraulic Power Units.
3 Ton, Wabash, 4 post down acting, 21" daylight, 12" stroke, 10" x 16" table, Control panel & SLC150, 7.5 HP
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
2.5" DIA. RAM APPROX. 12" STROKE, APPROX. 21" DAYLIGHT. BED 16" L TO R X 10" F TO B 2" DIA. TIE RODS, WORKING HEIGHT APPROX. 40", OVERALL HEIGHT 8". COMPLETE WITH CONTROL PANEL WITH SLC 150, T-CAT, AND HEATER CONTROLS. 7.5 HP MOTOR VICKERS HYDRAULIC PUMP AND VALVES, PNEUMATIC SAFETY GATES. ( ITEM #30).
5 Ton, 53 x 18", down-act, 34" daylight, 24" stroke, (2) 4" bore cylinders rated to 1000 psi, #2188 (3 available)
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
TWO 4" BORE SCHEFFER CYLINDERS WITH 24" MAX STROKE; 3" DIA RODS: RATED TO 1000 PSI. CYLINDERS ARE MOUNTED BELOW AND SO WORK OFF OF THE ROD ENDS OF THE CYLINDERS. APPROX 34" MAX DAYLIGHT; 10" SHUT HEIGHT. OPERATOR HEIGHT IS APPROX 36". OVERALL DIMENSIONS APPROX 76" X 25" X 57" TALL. APPROX 1,500 P0UNDS. ITEM #2188.
10 Ton, TMP, double press (hot & cold side w/shuttle), 13.5" x13.5", 6" daylight, up-act, #2476
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Tmp
TMP SERIAL #22563. NEW IN 2007. THE "HOT SIDE" HAS TWO 13.5"X 13.5" ELECTRIC PLATENS (5/8" DIA CARTRIDGE HEATERS; 230 VOLT; 700 WATT; 2 ZONES PER PLATEN; 6 HEATERS PER PLATEN). APPROX 5.75" DAYLIGHT AND 4.5" STROKE. THE "COLD SIDE" HAS CORED PLATES FOR WATER COOLING. APPROX 6" DAYLIGHT AND 7" STROKE. BOTH CLAMP ...more
12 Ton, Carver #C, 6.75" x6.25", 5.1" stroke, 0-17.5" adj.daylight, hand pump, like new, #2585
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Carver
Model: C
CARVER MODEL "C". SERIAL #37000-059. NOMINAL PLATEN AREA IS APPROX 6.75" L TO R X 6.25" F TO B (7.25 L TO R BETWEEN THREADED RODS; BUT L TO R CLEARANCE RESTRICTED BY TIE-ROD NUTS). DAYLIGHT IS ADJUSTABLE FROM APPROX 0-17.5". MAX STROKE IS 5.125". TIE RODS ARE 1.25" DIA. PRESSURE GAUGE. OVERALL APPROX DIMENSIONS: 18" X ...more
12 Ton, Wabash #12-1212-2TM, up-acting, 4-post, 12" x 12" platen,, 6" stroke, 6"-12" DL, #2567
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
Model: 12-1212-2TM
MODEL 12-1212-2TM. SERIAL #9019. SET UP WITH 12" X 12" X 3" ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15" X 15". DAYLIGHT IS ADJUSTABLE FROM APPROX 6" TO 12". CLAMP CYLINDER: 5" BORE WITH APPROX 6" MAX STROKE. FULLY GUIDED ON 1.25" DIA POSTS WITH 3" BUSHINGS. APPROX 44.5" OPERATOR ...more
Icon Industries, Inc has 278 more
listings in Hydraulic Presses.
Laminating & Composite molding presses, what size do you need, www.iconindustries.com
Category: Laminating Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Lift Tables
1 Result
4000 lb. Handling Specialty hydraulic scissor lift/lift table, up to 10' lift
Category: Lift Tables
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Handling Specialty
4000 pound hydraulic scissor lift/lift table. 800 pound side load rating. 2000 pound end load rating. Lift range up to approx. 120". height in lowered position is 33.5". Top frame is approx 96" x 36". Heavy duty 6" casters. Two Parker cylinders (4" bore; 2.5" rod diameter; 26" max stroke; rated to 3000 PSI; ...more
Material Lifts - (Drum, Pallet, Vacuum)
1 Result
4000 lb. Handling Specialty #2-100-40X, scissor lift, 100" lift, 4" bore, 2.5" rod diameter, #2639
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Handling Specialty
Model: 2-100-40X
Handling Specialty Model 2-100-40X. 4000 pound load capacity. 800 pound side load rating. 2000 pound end load rating. Lift range up to approx. 120". Height in lowered position is approx. 33.5".Top "frame" is approx. 96" x 36". 6" heavy duty casters. Two Parker cylinders: 4" bore; 2.5" rod dia; 26" max stroke; rated to ...more
50 Ton, Dreis & Krump (Chicago) Size 6L-8-SP; 8' overall, 3" stroke, 40 SPM, #2716
Category: Mechanical Press Brakes
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Dreis & Krump
Size: 6L8-SP. Serial #L-4610. 12 GA mild steel. Table size: approx. 96" x 9". 3" stroke; 8.5" open; 3" power ram adjustment; 40 SPM. 16" light curtains and mesh guarding. Foot pedal operation. 5 HP motor (1800 RPM). Approx overall dimensions: 114" x 72" x 95" tall. Approx 10,500 pounds. Manual. Item #2716.
120 Ton, Verson #B58-120-PB, mechanical, 10' overall, 3" stroke, 5" adj, 30 SPM, back gauge, #2717
Category: Mechanical Press Brakes
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Verson
Model: B58-120-PB
Model #B58-120-PB. Serial #17216. 10' bed length. 3" stroke; 5" adjustment; 30 SPM. 102" between housings. Air clutch. Foot pedal operation. 40" operator height. Back gage: PROGAGE model MG204; Serial #9698. 10 HP (208-220/440 volt; 1800 RPM). 1.5 HP (220/440 volt; 1200 RPM). 60amp 480 volt disconnect. Cycle ...more
Molding Compression Transfer Presses
13 Results
42 Ton, 24" x 18", 10" str.on clamp cylinder, 13.5"-30" DL, 3.25" transfer cylinder, #2441
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
NOMINAL 24" X 18" BED. MAIN RAM IS APPROX 6" BORE WITH APPROX 10" MAX STROKE. SIDE PULL-BACK CYLINDERS APPROX 2.75" BORE; 1.5" DIA ROD; 10" MAX STROKE. DAYLIGHT IS ADJUSTABLE FROM APPROX 13.5" TO 30.75". FULLY GUIDED ON 2.5" POSTS WITH 7.25" BUSHINGS. T-SLOTS. OPTIONAL TOP TRANSFER CYLINDER: APPROX 3.25" BORE; 2" DIA ...more
50 Ton, Watson Stillman, 16" x22", 39" DL, 12" stroke main clamp, 9" stroke trnsfr, #233
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Watson Stillman
DOUBLE-ACTING. (PRESS HAS 16" X 16" T-SLOTTED BED & SLIDE; HOWEVER, THERE IS 22" L TO R BETWEEN TIE RODS AND 9" F TO B BETWEEN TIE RODS). 39" DAYLIGHT WITH APPROX. 12" STROKE. 6.5 TON PULLBACK. 12.5 TON TRANSFER WITH 9" STROKE. 3" STROKE ON EJECTORS. 2.5" DIA. TIE RODS. 45" WORK HEIGHT. OIL GEAR HYDRAULIC SYSTEM 3 ...more
70 Ton, 23" x17", 26" DL, 12" str--main clamp, 8" str--trnsfr, 36.5" work height, 98" tall, #325
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OVERALL PLATEN SIZE: 26 \u00bd" L to R X 17" F to B. DISTANCE BETWEEN POSTS: 23" L to R X 9" F to B. POST DIAMETER 2 \u00be". MAIN RAM: 10" PISTON, 8" ROD, DOUBLE ACTING, RATED AT 2000 PSI, 1 \u00bd" NPT BOTTOM PORTS, \u00be" NPT ROD PORTS. APPROX STROKE 12". DAYLIGHT 26". FULLY GUIDED SLIDE WITH 6" BUSHINGS. TRANSFER ...more
70 Ton, 23" x17", 25" DL, 13" str--main clamp, 8" str--trnsfr, push-back cyls, 99" tall, #320
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OVERALL PLATEN SIZE: 30" L to R X 17" F to B. DISTANCE BETWEEN POSTS: 23" L to R X 9" F to B. POST DIAMETER 2 \u00be". MAIN RAM: 10" DIAMETER, SINGLE ACTING, RATED AT 2000 PSI, 1" NPT PORTS. STROKE APPROX 13". DAYLIGHT 25". FULLY GUIDED SLIDE WITH 8 \u00bd" BUSHINGS. TWO SINGLE ACTING, PUSH BACK CYLINDERS WITH 2 ...more
75 Ton, Hull #359G, 24" x24", 34" max daylight, 10" str--main clamp, 10.5" str-internal cyl, #95
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hull
Model: 359G
MODEL 359-G, SERIAL #2019. BOTTOM BOLSTER HAS A 23 3/4\.
Icon Industries, Inc has 8 more
listings in Molding Compression Transfer Presses.
Plastic and Rubber Calenders
1 Result
8" x 13" Vertical Calender, 3-roll, 7.5 HP, cored rolls, top & bottom rolls adjust, #1700C
Category: Plastic and Rubber Calenders
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
ROLLS ARE OVERALL 14" LONG WITH 13" USABLE. 7.5 HP U.S.VARIDRIVE: TYPE VEU-GS, 220/440 VOLTS, 1800 RPM, FRAME 44-254U-741. GEAR BOX: SERIAL #3847089; GEAR RATIO 6.21. TOP AND BOTTOM ROLLS ARE ADJUSTABLE. CORED ROLLS; THREE ROTARY JOINTS. KNEE BRAKES. CONTROLS INCLUDE START,STOP AND JOG REVERSE. OVERALL DIMENSIONS: ...more
Plastic Rubber Mills
1 Result
4" x 8" Troy Engine #R-2098, 3-roll horizontal, manifold w/individual shut-offs, chrome rolls, adjust rolls, end-guides, start/stop, #2628
Category: Plastic Rubber Mills
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Troy
Model: R-2098
TROY ENGINE & MACHINE CO. MACHINE # R-2098. 4" X 8" CORED ROLLS WITH MANIFOLD AND INDIVIDUAL SHUT-OFFS. CHROME ROLLS. ADJUSTABLE END-GUIDES. ADJUSTABLE ROLLS. APPROX 42" CENTER-LINE (ON 24" TALL TABLE). 220/440 VOLT MOTOR (900/750 RPM). E-STOP (CHAIN). OVERALL APPROX DIMENSIONS: 34" X 26" X 52" TALL. APPROX 350 ...more
7.5" X 6" X 1" Electric Platens (qty 12)
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
FOUR 0.375" DIAMETER CARTRIDGE HEATERS: WATLOW FIREROD #9722G-G4-N17-NX4U; 300 W; 120V; APPROX 4.75" LONG. NEW PART # PER WATLOW IS G5J-15227; RATED TO APPROX 1000 F. CENTER THERMOCOUPLE PORT. TWO 1" X 6" X 0.25" STEPPED DOWN AREAS ON BACK SIDE OF PLATEN. 8.5" OVERALL LEFT TO RIGHT. APPROX 14 POUNDS. QTY 12. ITEM #2204.
8" X 5" X 1" Electric Platens (qty 15)
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
FOUR 0.375" DIAMETER CARTRIDGE HEATERS: WATLOW FIREROD #9722G-G4-N17-NX4U; 300 W; 120V; APPROX 4.75" LONG. NEW PART # PER WATLOW IS G5J-15227; RATED TO APPROX 1000 F. CENTER THERMOCOUPLE PORT. APPROX 11 POUNDS. QTY 15. ITEM #2205.
8" X 6" X 1" Electric Platens (qty 5)
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
FOUR 0.375" DIAMETER CARTRIDGE HEATERS: WATLOW FIREROD #9722G-G4-N17-NX4U; 300 W; 120V; APPROX 4.75" LONG. NEW PART # PER WATLOW IS G5J-15227; RATED TO APPROX 1000 F. CENTER THERMOCOUPLE PORT. TWO 1" X 6" X 0.25" STEPPED DOWN AREAS ON BACK SIDE OF PLATEN. APPROX 14 POUNDS. QTY 5. ITEM #2150.
8.25" x 8.12" x 1", Steam Platen
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: STEAM PLATEN
9.75" X 7.5" Electric Platens (qty 2)
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
FOUR 3/8" CARTRIDGE HETERS. 220 VOLT; SINGLE PHASE. ONE THERMOCOUPLE. (QTY 2) (ITEM #1808).
Icon Industries, Inc has 168 more
listings in Platens.
Press Accessories and Parts
3 Results
Ram from hydraulic press, 20" dia x 36" long, (2) 1" threaded holes, never used, #1084
Category: Press Accessories and Parts
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: RAM FROM HYDRAULIC PRESS
20" DIAMETER X 36" LONG. FOUR 1" THREADED HOLES IN ONE END, TWO 1" THREADED HOLES IN OPPOSITE END. NEVER USED. C (ITEM #1084).
Ram from hydraulic press, 13.5" diameter x 26.5" long, never used, #1052
Category: Press Accessories and Parts
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: RAM FROM HYDRAULIC PRESS
13.5" DIAMETER X 26.5" LONG. NEVER USED. C (ITEM #1052).
Ram from hydraulic press, 20" dia x 17.5" long, 1/2" threaded hole in top center, #653
Category: Press Accessories and Parts
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: RAM FROM HYDRAULIC PRESS
RAM HAS BEEN GROUND TO 19.973 DIAMETER. CAN BE METALIZED OR CHROME PLATED TO ORIGINAL 20" DIA. SOLID STEEL. \u00bd" THREADED HOLE IN CENTER TOP. (ITEM #653).
Oilgear Pump #DP-817, 1140 RPM, 1700 psi, #2518
Category: Pumps - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Oilgear
Model: DP-817
SERIAL# 64567. RATED AT 1140 RPM. RATED TO 1700 PSI. POWER OUTPUT: 8 H.P. APPROXIMATELY 24" X 24" X 24". APPROXIMATELY 500 POUNDS. ITEM # 2518.
Reciprocating Type Air Compressors
1 Result
Ingersoll-Rand #223X5, air compressor, Ingersoll-Rand motor 5 HP, 1800 RPM, no tank, #2467
Category: Reciprocating Type Air Compressors
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Ingersoll-Rand
Model: 223X5
MODEL #223X5. SERIAL #30T-681707. BALDOR 5 HP MOTOR (1800 RPM; 208-230-460V). NO TANK. ITEM #2467.
Rotary Vane Pumps (Not Vacuum)
1 Result
Hydac #PFC-32.0502.5-4-3415-80MF18010BM-5, pump/filter/cooler, 2.2/2.5 KW, 1800 RPM, 23.8 gpm, 140 psi, plane type heate exchanger, #2456
Category: Rotary Vane Pumps (Not Vacuum)
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hydac
MODEL PFC-32.0502.5-4-3415-80MF18010BM-5. (2.2/2.5 KW; 220/440V; 1800 RPM). ROTARY VANE PUMP RATED AT 23.8 GPM AND 140 PSI. DES-CASE FLOWGUARD FILTER. PLATE TYPE HEAT EXCHANGER. DRIP PAN. APPROX OVERALL DIMENSIONS: 24" X 18" X 22" TALL. APPROX 300 POUNDS. ITEM #2456.
Squirrel Cage AC Electric Motor
4 Results
30 HP 1200 RPM Electric Motor, 208-230/460 Volts, new bearings
Category: Squirrel Cage AC Electric Motor
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Electric Motor
30 H.P. 208-230/460 VOLTS. 1200 RPM. 3 PH/60 HZ. APPROX 2.375" SHAFT DIA WITH A 0.625" KEY SLOT; APPROX 6" LONG. APPROX 32" X 26" X 18" TALL. APPROX 1,000 POUNDS. NEW BEARINGS. ITEM #2431.
30 HP 1200 RPM Reuland, Frame 326-U-47, double shaft, 230/460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Reuland
Frame: 326-U-47
Reuland. 30 HP; 1200 RPM; 230/460 volt; 326-U-47 frame. Double-shaft. C-face brackets both sides (tagged for Denison PV-06-007 and TG-095). Approx 41" x 24" x 16" tall. Approx 200 pounds. Item #2724.
50 HP 1800 RPM Lincoln, Frame 326TC, TEFC, 208-230/460V.
Category: Squirrel Cage AC Electric Motor
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Lincoln
Frame: 326TC
LINCOLN TEFC 50 HP MOTOR (208-230/460V; 1800 RPM; 326 TC FRAME; 140/122/61 AMPS). C-FACE BRACKET. OVERALL DIMENSIONS APPROX 36" X 24" X 20" TALL. APPROX 1200 POUNDS. ITEM #2576.
100 HP 1185 RPM Lincoln, Frame 445U, Electric Motor, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Lincoln
Frame: 445U
LINCOLN MODEL D-5G9759HF. FRAME 445U. 1185 RPM; 460 VOLTS; 121 AMPS. SHAFT DIAMETER IS APPROX 2.875". INCLUDES C-FACE BRACKET AND COUPLING (2.875" TO 1.5"). OVERALL DIMENSIONS APPROX: 39" X 29" X 26" TALL. APPROX 1,500 POUNDS. ITEM #2313.
Stainless Steel Tanks and Vessels
8 Results
17 gallon Hydraulic tank, filler breather, sight glass, removable access plate, #2158
Category: Stainless Steel Tanks and Vessels
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
17 GALLON CAPACITY; FILLER BREATHER; SIGHT GLASS; REMOVABLE ACCESS PLATE. ITEM #2158.
50 gallon Blanchard, overhead tank, 36" x 24" x 18", mounted in drip pan, #1314
Category: Stainless Steel Tanks and Vessels
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
THREE 1.5" NPT SUCTION PORTS WITH BALL VALVES. TWO WITH PROX SWITCHES. TWO 1", ONE.75"AND TWO.5" TOP RETURN PORTS. ONE HYCON TOP RETURN FILTER WITH ELECTRIC INDICATOR. SHOCK MOUNTED BLANCHARD PLATE: 45" L X 14" W X 1" THICK. 10HP, 1200 RPM, 460 VOLT C-FACE MOTOR WITH C-FACE BRACKET. MOUNTED IN DRIP PAN. TANK ...more
60 gal. Overhead hydraulic tank, bottom NPT suction ports, mounted in drip pan, #1313 (4 available)
Category: Stainless Steel Tanks and Vessels
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OVERHEAD TANK: 42" L X 32" W X 14" TALL. BOTTOM NPT SUCTION PORTS: FOUR 1.5" (TWO WITH 1.5" BALL VLVES); THREE.50". TOP NPT RETURN PORTS: TWO 2"; TWO 1"; FOUR.50". TWO 1.5" TOP RETURN FILTERS. TWO SHOCK MOUNTED PLATES(DOUBLE STACK): TOP PLATE 14" W X 45" L X 1" THICK; BOTTOM PLATE: 14" W X 36" L X 1" THICK. MOUNTED IN ...more
100 gallon Blanchard, single & double stack, 58" x 31" x 15.5", mounted in drip pan, #1324
Category: Stainless Steel Tanks and Vessels
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
DOUBLE STACK UNIT. TWO SHOCK MOUNTED BLANCHARD PLATES: ONE 14" X 15" X 1", ONE 27" X 63" X 1. SIX 1.5" SUCTION PORTS WITH BALL VALVES. SIX 3/8"NPT BOTTOM PORTS. FOUR.75", TWO 2", TEN 3/8" NPT TOP RETURN PORTS. THREE 1.5" NPT RETURN FILTERS. OVERALL TANK DIMENSIONS: 58" X 31" X 15.5". OVERALL DIMENSIONS: 75" L X 48"W X ...more
100 gallon Blanchard, single & double stack, 58" x 33" x 15", mounted in drip pan, #1301, 1302 (2)
Category: Stainless Steel Tanks and Vessels
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
SIX 2" NPT SUCTION PORTS WITH 1.25" BALL VALVES. THREE PARKER TOP RETURN FILTERS. TWELVE.50" AND TWO 2" NPT TOP RETURN PORTS. SHOCK MOUNTED BLANCHARD PLATES: 45" L X 14" W X 1" THICK. DOUBLE STACK UNIT. ALL MOUNTED IN DRIP PAN. TANK DIMENSIONS: 58" 33" X 15" TALL. OVERALL DIMENSIONS: 77" L X 52" W X 96" TALL. (ITEM ...more
Icon Industries, Inc has 3 more
listings in Stainless Steel Tanks and Vessels.
Temperature Control Units (Oil & Water)
1 Result
Aec Temp. control unit, 60 psig, 3/4 HP, 3450 RPM, 220 V., #528
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Aec
SERIAL #85DOC4. 60 PSIG. \u00be HP. 3450 RPM. 220 VOLTS. PUMP PRESSURE GAUGE. 120\u00baF. DISCHARGE TEMPERATURE GAUGE. OVERALL DIMENSIONS: 50" X 28" X 38" TALL. SOME DRAWINGS. (ITEM #528).
100 lb. Monsanto #Tensometer-500, load cell: 100 lb., controls including chart recorder, #2161
Category: Tensile Testers
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Monsanto
Model: TENSOMETER-500
Serial #212 Load cell: 100 lb. Controls include a chart recorder. Approx overall dimensions 30" x 24" x 86" tall; Panel is approx. 28" x 28" x 10". Approx 250 pounds. Some paperwork. Item #2161.
Tooling and Accessories - Miscellaneous
26 Results
60 Gallon, Overhead Tank, Blanchard Plate, Drip Pan
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
OVERHEAD TANK. ONE 2" SUCTION PORT WITH BALL VALVE AND PROX SWITCH. ONE 1.5" TOP PARKER RETURN FILTER. TWO 1", TWO.50", TWO.25" TOP RETURN PORTS. ONE GAUGE AND PUSH TO TEST BLOCK. SHOCK MOUNTED BLANCHARD PLATE 12.5" W X 30" L X.50" THICK. OVERALL TANK DIMENSIONS: 47" L X 27" W X 14" TALL. OVERALL DIMENSIONS: 55" L X ...more
60 Gallon, Overhead Tank, Blanchard Plate, Drip Pan
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
ONE 1.25" AND ONE.50" SUCTION LINES WITH BALL VALVES. TWO 1.25" AND TWO.50" DOWN LINES. SHOCK MOUNTED BLANCHARD PLATE WITH PUMP FOOT BRACKET. DRIP PAN. STAND COULD HANDLE A LARGER TANK. TANK DIMENSIONS: 48" L X 23" W X 16" TALL. OVERALL DIMENSIONS: 76" L X 50" W X 67" TALL. (ITEM #1280).
60 Gallon, Overhead Tank, Blanchard Plate, Drip Pan
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Blanchard
ONE 2" NPT SUCTION PORT WITH BALL VALVE. TWO.75"AND ONE.5" BOTTOM PORTS. ONE 1.5", TWO 1.25", ONE.75" AND ONE.5" NPT TOP PORTS. SHOCK MOUNTED RAILS WITH TWO 10HP, 1200 RPM, 460 VOLT C-FACE MOTORS WITH C-FACE BRACKETS. MOUNTED IN DRIP PAN. TANK DIMENSIONS: 47" L X 27" W X 13" TALL. OVERALL DIMENSIONS: 56" L X 43" W X ...more
Spacer Block, 30" X 30" X 3" (qty 2 )
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
EIGHT.5" DIAMETER THRU HOLES. (QTY 2) (ITEM #1255).
Spacer Block, 62" X 34" X 15.5"
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
62" X 34" X 15.5" TALL. TOP PLATE IS 2" THICK; BOTTOM PLATE IS 1.75" THICK. THERE ARE 2 T-SLOTS BOTH FRONT TO BACK AND LEFT TO RIGHT. ITEM #1851.
Icon Industries, Inc has 21 more
listings in Tooling and Accessories - Miscellaneous.
30 Ton, Kard #FTP30, 32.5" x 32", 30" DL, 22" stroke, 15 HP, safeties, #1948
Category: Trimming Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Kard
Model: FTP30
KARD MODEL FTP-30. F TO B BETWEEN THE POSTS IS 16"; OVERALL L TO R IS 60"; NOMINAL BED SIZE IS 32.5" X 32". MAX DAYLIGHT OF APPROX 30". CYLINDER IS APPROX 6" BORE WITH A 5.5" DIAMETER ROD AND 22" MAX STROKE. FULLY GUIDED WITH 8" BUSHINGS ON 3" DIAMETER POSTS. APPROX 34" OPERATOR HEIGHT. BED AND SLIDE HAVE T-SLOTS. ...more
50 Ton, Clearing #H4C, 42" stroke, 48" x 48", 60" DL, 40 HP, Safeties, Relay controls, #1944
Category: Trimming Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Clearing
Model: H4C
CLEARING MODEL H4C. SERIAL #6903-4. 36" F TO B BETWEEN THE POSTS; 59.5" L TO R OVERALL. NOMINAL BED SIZE IS 48" X 48". MAX DAYLIGHT IS APPROX 60". CYLINDER IS APPROX 8" BORE WITH A 7" DIAMETER ROD AND 42" MAX STROKE. OPERATOR HEIGHT IS 32". TWO SAW-TOOTH PNEUMATIC SAFETIES. BED HAS A CUT-OUT APPROX 36" X 14". T-SLOTS ...more
50 Ton, Kard #TP50-4, 32.5" x 30", 22" DL, 16" stroke, 10 HP, safety catch, #1945
Category: Trimming Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Kard
Model: TP50-4
KARD MODEL TP-50-4. SERIAL #1738-1. CYLINDER IS APPROX 7.5" BORE WITH A 7" DIA ROD. MAX DAYLIGHT IS APPROX 22"; MAX STROKE IS APPROX 16". OPERATOR HEIGHT IS 40". FULLY GUIDED WITH 9.5" BUSHINGS ON 3.5" DIAMETER POSTS. CUT-OUT IN BED OF PRESS THAT IS 27" X 16.75". PNEUMATIC SAW-TOOTH SAFETY. PRESS BASE IS DESIGNED TO ...more
50 Ton, PH Hydraulics, 4-post, 52" stroke, 101" x 42", 66" daylight, 75 HP, 1105 IPM fast close, #1657 (3 available)
Category: Trimming Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Ph Hydraulics
F TO B BETWEEN THE POSTS IS 28". L TO R OVERALL IS APPROX 120". NOMINAL BED SIZE IS 101" X 42". TWO CYLINDERS: 5" BORE, 3.5" ROD, RATED AT 2546 PSI AND APPROX 52" STROKE. MAX DAYLIGHT IS 66". FULLY GUIDED WITH 31" BUSHINGS ON 4" DIAMETER POSTS. OPERATOR HEIGHT IS APPROX ...more
11.5" width x 11.5" H x 18" D Napco #5840, double unit, 500°F, #1055
Category: Vacuum Ovens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Napco
Model: 5840
11 1/2\.
26.5" Hg, Gast #2567-V108, oil-less dsgn, 1.5 HP, 0.75" inlet & outlet, CSA Standard, #2617
Category: Vacuum Pumps
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Gast
Model: 2567-V108
MODEL 2567-V108. MOTOR: 1.5 HP (230/460V; 1800 RPM). 0.75" INLET AND OUTLET. MAX VAC: 26.5 HG. OIL-LESS DESIGN. CSA STANDARD. OVERALL APPROX DIMENSIONS: 22" X 14" X 15". APPROX 120 POUNDS. ITEM #2617.
Fisher #667, 1.5", pneumatic actuated,Size 34,0.75" trvl,EZ type body, #1751
Category: Valves - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Fisher
Model: 667
SERIAL #15530765. ACTUATOR: TYPE 667; SIZE 34; BENCH SET 9-15; TRAVEL.75"; PRESS UNITS PSI; OPERATOR RANGE 3-15. BODY: TYPE EZ; SIZE 1.5"; PORT SIZE 1.5"; RATING CL600/1480 PSI CWP; PLUG SST; STEM SST; BODY STL; SEAT SST. OVERALL DIMENSIONS: 24" W X 32" TALL. APPROX 150 LBS. (ITEM #1751).
3" Parker / Jackes Evans valve, 1989, #2052 (5 available)
Category: Valves - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Parker
Year: 1989
FLUIDEX DIVISION GP30/W/G23MM/120V; MOPD 150; DATE: 11/89. ASSEMBLY WITH "B" BODY AND "G23" COIL. TYPE GP30P. NORMALLY CLOSED (ENERGIZE 120V COIL TO OPEN). PORTS: 3". QTY 5. ITEM #2052.
4" Prefill Valves, Pilot Operated (qty 2)
Category: Valves - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
PILOT OPERATED BY DOUBLE ACTING HYDRAULIC CYLINDER WITH 2" BORE, 2" STROKE AND \u00bd" PORTS. 4" HOSE BARB INLET AND OUTLET. 8" X 8" X 4 \u00bd" THICK FOUR-BOLT FLANGE WITH 3 \u00bd" ID AND 5 \u00be" X 5 \u00be" CENTER TO CENTER BOLT PATTERN. 4000 PSI. OVERALL DIMENSIONS 30" X 36" X 8". APPROX. WEIGHT 1000 LBS. ...more
Rexroth #SF100A1-1-30/12, prefill valve,186 GPM @ 4.9' sec,248 GPM @ 6.6' sec,#2656
Category: Valves - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Rexroth
Model: SF100A1-1-30/
MODEL SF100-A1-1-30-12. SIZE 100 = 4". #448534/8-B32624. RATED TO 186 GPM AT 4.9 FEET/SECOND; 248 GPM AT 6.6 FEET/SECOND. 230 PSI PILOT PRESSURE. MAX OPERATING PRESSURE IS 4570 PSI. APPROX 150 POUNDS. ITEM #2656.
Pre-fill Valve, Rexroth (qty 3)
Category: Valves - Miscellaneous
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
MODEL SF40A1-1-10/12. 2" SIZE WITH DECOMPRESSION POPPET; RATED AT 30 GPM AT 4.9 FEET/SEC; 80 GPM AT 13.1 FEET/SEC; RATED TO 4570 PSI. SPEC SHEETS AND DRAWINGS AVAILABLE. QTY 3 (ITEM #1802).
Icon Industries, Inc has 1 more
listing in Valves - Miscellaneous.
Welding Machine Parts and Miscellaneous
1 Result
Forward/reverse/jog, Miller Weldmaster #FX25, start, E-stop, 1 HP, 208-230/460 V.
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Miller
Model: FORWARD/REVERSE/JOG
MODEL FX25. SERIAL #497-393. FORWARD/REVERSE/JOG; START; E-STOP. 1 HP MOTOR (208-230/460V). WIRED FOR 230 VOLT 3 PHASE. SQUARE D ALTIVAR 18 (ATV18U09M2) VARIABLE SPEED AC DRIVE. WELDMASTER TEMP CONTROLLER. WILKESON DIAL AIR REGULATOR R21 LOW PRESSURE: 0-43 PSI. APPROX OVERALL DIMENSIONS: 43" X 24" X 60" TALL. PANEL: ...more
Woodworking Spindle Shapers
1 Result
Invicta/delta #43750, RS-15 Single Spindle Shaper, 7.5 HP, 53" x41" table
Category: Woodworking Spindle Shapers
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: 43750
