Harris Machine Tools, Inc.
Houston, TX 77277
Platinum Level Dealer
Surplus Record Dealer Since 1986
Contact
Sales Dept.
About
Harris Machine Tools, Inc., a leader in the industry since 1979, has over200,000 sq.ft., of warehouse space full of used machinery and equipment;
and has earned an outstanding reputation for quality, service, and integrity.
Products & Services
- Appraisers, Machinery & Equipment
- Boring Mills, Horz. & Vert.
- CNC Machinery
- Drills
- Grinders, Surface
- Lathes
- Lathes, CNC
- Rebuilding/Retrofitting
Associations & Affiliations
155 listings in 56 categories
Lincoln #Idealarc-CV-300, welding power source
Category: Arc Welders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Lincoln
Model: IDEALARC-CV-300
Edge Technologies #Rebel-80, bar feed, .315"-3.150" round diameter, 60" bar stick length, 2020
Category: Bar Feeders and Loaders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Edge Technologies
Model: REBEL-80
Year: 2017
2017 EDGE Rebel 80, Capacity. 3.15", Bar Length. 5', Control. CNC.
Bed and Knee Milling Machines - Horizontal
1 Result
Barker #PM, horizontal line shaft milling machine, 4" x12" table, 3C Collet taper, 1964
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Barker
Model: PM
Year: 1964
Table Size: 4" x 12", T-Slot: (1) 1/2", Table Longitudinal Travel: 5", Head Vertical Travel: 3", Saddle Cross Travel: 3", Spindle Nose: 3C Collet Taper, OAD (Approximate): 22" x 24" x 18.5" High, Note: All Subject to Verification.
Bed and Knee Milling Machines - Vertical
4 Results
Acer E-Mill #EVS-3VK, vertical milling machine, 10" x50" table, 3 HP, R-8 taper, 2009
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Acer
Model: EVS-3VK
Year: 2009
Table Size: 10 x 50, Table Travel Longitudinal: 34, Table Travel Cross: 16, Vertical Knee Travel: 16, Ram Travel: 20, Spindle Speed (RPM): 60 - 4500, Spindle Motor: 3 HP, Spindle Taper: R-8, Head Swivel: 90 DEG., Head Tilt: 45 DEG., Quill Diameter: 3.375, Quill Travel: 5, Weight: 3050.
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024, (3 available)
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
Table Size: 9" x 49", T-Slots: (3) 5/8", Table Longitudinal Travel: 37", Table Cross Travel: 12", Knee Vertical Travel: 16", Ram Travel: 15", Quill Travel: 5", Spindle Nose to Table: 1.3" - 17.3", Turret Swivel: 360 Deg., Head Swivel (L-R): +/- 45 Deg., Head Tilt (Up-Down): +/- 45 Deg., Spindle to Column: 6" - 21.4" ...more
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
Table Size: 9" x 49", T-Slots: (3) 5/8", Table Longitudinal Travel: 37", Table Cross Travel: 12", Knee Vertical Travel: 16", Ram Travel: 15", Quill Travel: 5", Spindle Nose to Table: 1.3" - 17.3", Turret Swivel: 360 Deg., Head Swivel (L-R): +/- 45 Deg., Head Tilt (Up-Down): +/- 45 Deg., Spindle to Column: 6" - 21.4" ...more
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
"Table Size","9" x 49"",""; "Table Travel Longitudinal","37","inches"; "Table Travel Cross","12","inches"; "Vertical Knee Travel","16","inches"; "Ram Travel","15","inches"; "Quill Travel","5","inches"; "Max Distance Spindle To Table Top","1.3" - 17.3"",""; "Turret Rotation","360 Deg.",""; "Head Swivel","(L-R) +/- 45 ...more
Boring Bar, Mazak Integrex #E500, 4" diameter, 4'10" L
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Model: E500
Boring bar, 110-1/2" length, 3" to 3/8" diameter, will fit Giddings & Lewis
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Length: 110-1/2", Diameter: 3" to 3/8", Note: Will fit Giddings & Lewis.
Boring bar, 103" length, 2" diameter, will fit Giddings & Lewis
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Length: 103", Diameter: 2", Note: Will fit Giddings & Lewis.
Boring bar, 108" length, 4"-2" diameter, will fit Kuraki machine
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Length: 108", Diameter: 4" to 2", Note: Will fit Kuraki machine.
Boring bar, 60" length, 2" diameter, will fit Wotan
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Length: 60", Diameter: 2", Note: Will fit Wotan.
Boring bar, 102" length, 3"- 1-1/2" diameter, will fit Giddings & Lewis
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Length: 102", Diameter: 3" to 1-1/2", Note: Will fit Giddings & Lewis.
800mm Boring bar, for Mazak Integrex E500
Category: Boring Bars
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Giddings & Lewis #A, 24" universal head, #50 taper
Category: Boring Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Model: A
DISTANCE FROM BORE TO CENTER: 24", TAPER: #50.
Giddings & Lewis #A, 30" universal head, #50 taper
Category: Boring Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Model: A
DISTANCE FROM BORE TO CENTER: 30", TAPER: #50.
Boring Mills, Horizontal, Floor Type
1 Result
5" Cincinnati Gilbert, floor type horizontal boring mill with floor plate, 50" x 72" infeeding power rotary table with 72" infeed
Category: Boring Mills, Horizontal, Floor Type
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cincinnati
, SET OF QUICK CHANGE TOOL HOLDERS, 26" CONTINUOUS FEED FACING HEAD, 50" X 72" INFEEDING POWER ROTARY TABLE WITH 72" INFEED, 60" X 160" T SLOTTED FLOOR PLATE.
Boring Mills, Horizontal, Table Type
3 Results
3.1" Lazzati #HB80P, 51.5" x36" tbl, 90.5" X, 63" Y, 39.3" Z, Acu-Rite III controls w/DRO, tailstock, tooling, #18638
Category: Boring Mills, Horizontal, Table Type
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Lazzati
Model: HB80P
Year: 1964
Spindle, Spindle Diameter: 3.2", Spindle Taper: Morse #4, Spindle Speed Range: 6.5 - 1,000 RPM, Table & Facing Plate, Rotary Table Size: 51.5" × 36", Facing Plate Diameter: 20", Travels, Longitudinal Travel (X-Axis): 70" (with tailstock), Cross Travel (Z-Axis): 52", Vertical Travel (Y-Axis): 39", Feeds, Feed ...more
4.3" Johnford #BMC-110, Horizontal Table Type Boring Mill, 79" X, 71" Y, 63" Z, 55" x 63" table, 21.7" spindle travel, 35 HP, 3000 RPM, 60 ATC
Category: Boring Mills, Horizontal, Table Type
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Johnford
Model: BMC-110
JOHNFORD BMC-110, Spindle Size. 4.33", X-Horiz Tvl of Table. 79", Y-Vert Tvl of Head. 71", Power. 35 hp, RPM. 3,000 RPM, Table-W. 55", Table-L. 63", Spindle Tvl. 21.7", Control. CNC.
5" Giddings & Lewis #350-T, Manual Horizontal Boring Mill, 48" x 74" table, 72" X, 48" Y, 60" Z, 36" spindle travel
Category: Boring Mills, Horizontal, Table Type
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Model: 350-T
Spindle Size: 5", Table Size: 48" X 74", X-Horiz Tvl of Table: 72", Y-Vert Tvl of Head: 48", Z-Axis Travel: 60", Table-W: 48", Table-L: 74", Spindle Tvl.: 36", Spindle Motor: 15 HP, Max RPM: 975, Approximate Weight: 36,000 to 40,000 lbs., TAILSTOCK, DRO, ** EXCELLENT CONDITION **.
72" x 72" x 72" ProTech #PT-IGFBF-727272, Box Furnace, 2017
Category: Box Type Furnaces
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Year: 2017
WORK AREA: 72" WIDE X 72" HIGH X 72" DEEP, MAXIMUM LOAD: 4,000 LBS., TEMPERATURE UNIFORMITY: +/- 10 DEGREE F, OPERATING RANGE: 250 - 1425 DEGREE F, MAXIMUM TEMPERATURE: 1450 DEGREE F, HEATING: INDIRECT GAS FIRED, RECIRCULATION FAN: TWO (2) 6,000 CFM, HEATING INPUT: 2,400,000 BTUH, HEATING STYLE: PULSE FIRED ...more
Cincinnati Milacron #CINCO-15, Centerless Grinder, 4" diameter capacity, 24" diameter x 8" wide grinding wheel, 15 HP GW motor, 220 V., 3PH
Category: Centerless Grinders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cincinnati Milacron
CINCINNATI MILACRON CINCO 15, Capacity. 3", Grinding Wheel Dia. 24", GW Power. 15 hp, Regulating Wheel Dia. 15", RW Power. 1.5 hp, RW RPM. 300 RPM.
Mazak #Powermaster, CNC hollow spindle chucker lathe, Fusion 640T CNC, 42" swing, 32" chuck, 14.75" spld bore, 2003
Category: CNC Chucker Lathe
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: POWERMASTER
Year: 2003
Maximum Swing Over Bed Ways: 42” Maximum Turning Diameter: 39.37” Distance, Turret to Spindle Face: 62.99” Turret Positions: 8 X-Axis travel: 22.5” Z-Axis Travel: 44.88” Spindle Hole: 14-1/2” Spindle Speeds: Approx. to 500 RPM Main Motor: 30/45 KVA Under power : Mazak Fusion 640T ...more
CNC Horizontal Boring Mills - Table Type
5 Results
4.33" Kunming #R-4, CNC Horizontal Boring Mill, 70.8" X, 55.1" Y, 63" Z, 49.2" x 55.1" rotary table, 20 HP, 2024
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Kunming
Model: R-4
Year: 2024
Spindle, Spindle Diameter: 4.33" (110 mm), Spindle Taper: ISO 50, Spindle Speed Range: 10 - 1,100 RPM, Spindle Motor: 20 HP, Maximum Spindle Torque: 1,069 ft-lbs, Facing Head, Facing Head Diameter: 25.59", Facing Head Speed Range: 7 - 165 RPM, Maximum Facing Head Torque: 1,604 ft-lbs, Maximum Boring Diameter: 25.59" ...more
5.1" HNK #HB-130CX, CNC horizontal boring mill, Fanuc Control, 63" x 160" table with built-in rotary, 40 automatic tool changer, coolant thru spindle, 2000
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hnk
Model: HB-130CX
Year: 2000
BORING SPINDLE DIAMETER: 5.1", STROKE:, X AXIS: 157", Y AXIS: 90", Z AXIS: 51", W AXIS: 27.5", DISTANCE FROM SPINDLE NOSE TO CENTER OF TABLE: 30" - 80", DISTANCE SPINDLE CENTER TO TOP OF TABLE: 0 - 90", TABLE:, DIMENSION: 63" X 157", ROTARY TABLE DIMENSION: 63" X 63", ALLOWABLE LOAD: 33,000 LBS., ROTARY TABLE ALONE: ...more
6" Giddings & Lewis, table type CNC horizontal boring mill, Siemens 840 Control, 60" x 96" table, 60 HP, 2001
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Year: 2001
CNC Control: Siemens 840, Spindle Diameter: 6", Spindle Taper: CAT 50, Spindle Speed: 3,000 RPM, Spindle Motor: 60 HP, Coolant Through Spindle: Yes, Travels, X-Axis Travel: 120", Y-Axis Travel: 96", Z-Axis Travel: 96", W-Axis (Quill) Travel: 48", Table, Table Size: 60" x 72", Maximum Table Load: 50,000 lbs, Indexing ...more
Daewoo Doosan #DBC-110II, CNC Horizontal Boring Mill, 78.7" X, 59.1" Y, 47.2" Z, 55.1" x 70.9" table, 4.33" spindle diameter, 35 HP, 4000 RPM, Fanuc 31i-A control, 2011
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Doosan
Model: DBC-110II
Year: 2011
4th Axis: Yes, Horizontal Table/Pallet Size in mm: 1,778mm, W-Travel: 19.70", X-Travel: 78.70", Y-Travel: 59.10", Z-Travel: 47.20", Max Table/Pallet Load: 15,432lbs, Spindle:, Spindle Taper Type: CAT#50, Spindle Taper - Other: Big Plus, Spindle Speed: 4,000 RPM, Spindle Motor: 35 HP, Tool Changer, Tool Magazine ...more
Kimi #A-4, CNC / manual horizontal boring mill, 2025
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Kimi
Model: A-4
Year: 2025
Bardons & Oliver #500-Series, CNC Pipe Threading Lathe, 20" swing, 18" machining length, 10" turning diameter, 20" chuck, 15" bar, 30 HP, 1500 RPM, 2014
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bardons & Oliver
Model: 500-SERIES
Year: 2014
2014 BARDONS & OLIVER 500 SERIES, Swing. 20", Machining Length. 18", # Axis. 2, Chuck Size. 20", Bar Capacity. 15", Power. 30 hp, Max RPM. 1,500 RPM, Turning Dia. 10", Tailstock. No, Live Tooling. No, Sub Spindle. No, Spindle Bore. 15", Control. CNC, Dimensions. 175 in x 92 in x 90 in, Weight. 15000 lbs.
Daewoo Doosan #PUMA-800L, CNC Lathe, 39.4" swing, 126" machining length, 35.4" turning diameter, 39" chuck, 12.5" bar, 60 HP, 750 RPM, 12-station turret, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Daewoo Doosan
Model: PUMA-800L
Year: 2008
Swing: 39.4 in., Turning Diameter: 35.4 in., Maximum Turning Length: 126 in., Center Distance: 126 in., Chuck Size: 39 in., Bar Capacity: 12.5 in., X-Axis Travel: 18.5 in., Z-Axis Travel: 127 in., Rapid Traverse (X/Z): 394 IPM, Spindle Nose: A1-20, Spindle Speed: 750 RPM, Main Motor: 60 HP, Turret Capacity: 12 ...more
DMC #DL-40L, CNC Lathe, 29.5" swing, 65.2" machining length, 20.4" turning diameter, 18" hydraulic chuck, 30 HP, 2000 RPM, Fanuc 0i-TD control, 2014
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Dmc
Model: DL-40L
Year: 2014
2014 DMC DL-40L, Swing. 29.5", Machining Length. 65.2", Chuck Size. 18", Bar Capacity. 4.6", Power. 30 hp, Max RPM. 2,000 RPM, Turning Dia. 20.4", Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Control. CNC (Fanuc), Weight. 20,100.
DMG, Mori #NT-4250DCG/1000SZ, 5" Axis turning & milling center w/sub-spindle, 2017
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Dmg
Model: NT-4250DCG/1000SZ
Year: 2017
12" CHUCK ON MAIN SPINDLE, 10" CHUCK ON SUB SPINDLE, 180 POSITION TOOL CHANGER, CAPTO C6 B AXIS MILLING SPINDLE TAPER, TOOL SPINDLE FUL INDEXING OPTION FOR B AXIS, CHIP CONVEYOR, SUPER HIGH PRESSURE COOLANT, AUTOMATIC DOOR, RENISHAW OPM60 IN MACHINE WORKPIECE MEASURING PROBE, AUTOMATIC IN MACHINE TOOL PRESETTER FOR ...more
DN Solutions #Puma-4100LB, CNC Turning Center, 13.8" X, 84.8" Z, 50 HP
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Dn Solutions
Model: PUMA 4100LB
Year: 2023
X-Axis Travel: 13.8 in, Z-Axis Travel: 84.8 in, Maximum Spindle Speed: 2,000 RPM, Spindle Motor Power: 50 hp, Tool Changer Capacity: 12 tools, Dimensions (L × H × W): 227 × 89.5 × 90 in, Weight: 25,130 lb, X-Axis Rapid Traverse Rate: 630 in/min, Z-Axis Rapid Traverse Rate: 787 in/min, Chuck ...more
Daewoo Doosan #Puma-800L, CNC Lathe, 39.4" swing, 126" turning length, 35.4" turning diameter, 24" chuck, 12.5" bar capacity, 60 HP, 750 RPM, 12-station turret, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Doosan
Model: PUMA 800L
Year: 2008
Swing: 39.4 in., Turning Diameter: 35.4 in., Maximum Turning Length: 126 in., Center Distance: 126 in., Bar Capacity: 12.5 in., X-Axis Travel: 18.5 in., Z-Axis Travel: 127 in., Rapid Traverse (X/Z): 394 IPM, Spindle Nose: A1-20, Spindle Speed: 750 RPM, Main Motor: 60 HP, Turret Capacity: 12 Stations, Machine ...more
Femco #BL975/2000, CNC Flat-Bed Lathe, 55.1" swing, 80" centers, 78" machining length, 29.1" socs, 36" 4-jaw chuck, 50 HP, 450 RPM, Fanuc 0" i-TC CNC, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Femco
Model: BL975/2000
Year: 2008
2008 FEMCO BL975/2000.
Geminis #GT5-G2, CNC flat bed lathe w/Y-Axis, 48" swing, 78" centers, 4-jaw 40" chuck, 4 pos turret
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Geminis
Model: GT5-G2
Year: 2013
SWING OVER BED: 48", SWING OVER CROSS SLIDE: 33.5, DISTANCE BETWEEN CENTERS: 78", MAX WEIGHT BETWEEN CENTERS: 10,000 LBS., SPINDLE POWER: 50 HP, MAX MAIN SPINDLE RPM: 1,400, LIVE SPINDLE POWER: 10 HP, LIVE SPINDLE TAPER: NO. 50, 40" 4 JAW CHUCK, 4 POSITION TURRET, C AXIS POSITIONING, REMOVEABLE Y AXIS LIVE MILLING ...more
Haas #ST-25, CNC Turning Center, 31.7" swing, 22.5" machining length, 15.5" turning diameter, 10" chuck, 30 HP, 3400 RPM, tailstock, 2014
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Haas
Model: ST-25
Year: 2014
2014 HAAS ST-25, Swing. 31.7", Machining Length. 22.5", Chuck Size. 10", Bar Capacity. 3", Power. 30 hp, Max RPM. 3,400 RPM, Turning Dia. 15.5", Tailstock. Yes, Live Tooling. No, Sub Spindle. No.
Hankook #PROTEC-11N/2000, CNC Lathe, 186" x 31.5" bed, 43" swing, 78" between centers, 24.4" X, 78" Z, 29" swing over carriage, 36" 4-jaw chuck, 800 RPM, Fanuc 21i-TB control, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hankook
Model: PROTEC-11N/2000
Year: 2008
HANKOOK PROTEC-11N/2000, Swing. 43", Machining Length. 78", # Axis. 2, Chuck Size. 36", Max RPM. 800 RPM, Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Spindle Bore. 4.1", Control. CNC, Weight. 17500.
Hurco #TM18L, CNC Slant Bed Lathe, 35" swing, 83" machining length, 18" chuck, 6.5" bar, Hurco Max controls, 2013
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hurco
Model: TM18L
Year: 2013
CNC Control: Yes, Type of CNC Control: Hurco Max, Chuck Size: 18 in, Swing: 33.5 in, Turning Diameter: 25 in, Center Distance: 83.9 in, Bar Capacity: 6.5 in, Spindle Nose: A2-15, X-Axis Travel: 17 in, Z-Axis Travel: 80 in, Spindle Speed: 6,000 RPM, Main Motor: 73 HP, Turret Capacity: 12 Stations.
Hyundai Kia #SKT460, CNC Turning Center Lathe, 39.4" machining length, 29.5" swing, 24.8" turning diameter, 18" chuck, 40 HP, 2000 RPM, Fanuc 21i-TB CNC, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hyundai Kia
Model: SKT-460
Year: 2008
FANUC 21i-TB, CHIP CONVEYOR, NOTES:, HYDRUALIC CHUCK REMOVED, NO TAILSTOCK.
LeBlond #7550, wide bed heavy duty CNC lathe, 75" swing, 120" centers, retrofit/reconditioned, 2017
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Leblond
Model: 7550
Year: 2017
CNC Control: Fanuc 0i-TD, Face Plate Diameter: 72 in., Swing: 75 in., Distance Between Centers: 120 in., Swing Over Cross Slide: 52 in., Cross Travel: 42.5 in., Bed Width: 60 in., Tailstock Quill Diameter: 12 in., Maximum Workpiece Weight:, 100,000 lbs @ 13 RPM, 77,600 lbs @ 175 RPM, 61,500 lbs @ 300 RPM, Spindle ...more
Mazak #Integrex-E-650H-II, CNC Multi-Axis Lathe, 36" swing, 120" machining length, 32" turning diameter, 18" chuck, 7" bar, 50 HP, live tooling, tailstock, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: INTEGREX E-650H II
Year: 2006
CNC Control: yes, Type of CNC Control: Mazatrol Matrix CNC Control, Chuck Size: 18.5 inches, Turning Diameter: 36.2 inches, Center Distance: 120 inches, Spindle Bore: 7 inches, Spindle Speed (RPM): 1600, Main Motor: 60HP, Live Milling (Yes / No): yes, Live Milling Speed (RPM): 10000, Live Milling Motor: 50 HP, Spindle ...more
Mazak #Integrex-e650/3000MM, 5" Axis turning & milling center, Mazatrol 640M Pro Control, 3-jaw 24" chuck, 2005
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: INTEGREX-E650/3000MM
Year: 2005
2005 MAZAK INTEGREX E650H, Travels:- Y-Axis: 25.6"- B-Axis: 0.0001 Contouring- C-Axis: 1000 RPM, EQUIPPEED WITH:, 24" SCHUNK 3 JAW FRONT MOUNT AIR CHUCK, MAZATROL 640M PRO CNC CONTROL, SMW HYDRAULIC STEADY REST (1.7 - 12.2" CAPACITY), BORING BAR STOCKER FOR 100 AND 80MM BARS, MIST COLLECTOR, AUTOMATIC TOOL LENGHT ...more
Mazak #Multiplex-6300, CNC lathe, Mazatrol 640T Control, high pressure coolant, chip conveyor, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: MULTIPLEX-6300
Year: 2006
2006 MAZAK MP6300, MAZAK Mazatrol 640T CNC Control, C-Axis on both spindles, High pressure coolant, Chip conveyor, Tool setter, and more, Swing. 16.93", Machining Length. 25.59", # Axis. 2, Chuck Size. 12", Bar Capacity. 3.03", Power. 30 hp, Max RPM. 4,000 RPM, Control. CNC, Dimensions. 168 x 96 x 86, Weight. 26400.
Mazak #Slant-Turn-50N, CNC lathe, Mazatrol 640T Control, 31.7" swing, 120" centers, 7" chuck, 3.5" bar, chip conveyor, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: SLANT-TURN-50N
Year: 2006
CNC Control: yes, Type of CNC Control: Mazatrol 640T CNC Control, Chuck Size: 20 inches, Swing: 31.7 inches, Turning Diameter: 28 inches, Center Distance: 120 inches, Bar Capacity: 3.5 inches, Spindle Bore: 4 inches, X Axis Travel: 22.6 inches, Z Axis Travel: 12 inches, Rapid Traverse (X/Z): 473/552 IPM, Spindle Speed ...more
Mazak #Slant-Turn-50N, CNC lathe, Mazatrol 640T Control, 31.7" swing, 120" centers, 24" chuck, 3.5" bar, chip conveyor, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: SLANT-TURN-50N
Year: 2006
See it in action on our YouTube channel!, 4-Jaw Chucks on Front & Rear, Control Options:, Coordinate Rotation and Scaling, Helical Interpolation, Macros, EIA/ISO Code Input Function, Thread Start Point Compensation Direct DWG Size Input 600 Macro Variables User Macro Interrupt Work Coordinates Select Polar ...more
Mazak #Slant-Turn-50N, CNC lathe, Mazatrol 640T Control, 80" centers, 16" chuck, chip conveyor, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: SLANT-TURN-50N
Year: 2006
"CNC Control","yes",""; "Type of CNC Control","Mazatrol 640T CNC Control",""; "Chuck Size","18","inches"; "Turning Diameter","28","inches"; "Center Distance","80","inches"; "Spindle Bore","4","inches"; "X Axis Travel","22.6","inches"; "Z Axis Travel","80","inches"; "Rapid Traverse (X/Z)","473/552 IPM",""; "Spindle ...more
Mazak #Slant-Turn-60NRB, CNC hollow spindle slant bed lathe, Mazatrol 640T Control, 2007
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: SLANT-TURN-60NRB
Year: 2007
Includes: Mazatrol 640T CNC control Front / Rear 4-jaw manual chucks SMW Autoblok steady rest 24 position tool turret tailstock Chip conveyor Note: All subject to verification, *Perishable tooling such as turning tools and boring bars will be removed. All turret tool blocks shown IN PHOTOS WILL BE included with the ...more
Mori Seiki #NT-4250/1500SZ, multi-tasking CNC turning center, 28.7" swing, 73.3" centers, 3.1" bar, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mori Seiki
Model: NT-4250/1500SZ
Year: 2006
Maximum Swing (Head 1): 28.7", Maximum Swing (Head 2): 28.7", Swing Over Cross Slide: 28.7 / 15.7 (Turret 2), Maximum Distance Between Centers (S & SZ): 73.3, Maximum Turning Length (SZ): 60.7, Maximum Turning Diameter: 25.9 / 13.7 (Turret 2), X1 Axis Travel: 24.6 + 4.9, X2 Axis Travel Turret: 7.7, Z1 Axis Travel: ...more
Okuma #Impact-LU45, CNC Lathe, 33" swing, 78.7" turning length, 22" turning diameter, 10.5" bar, 50 HP, 900 RPM, twin turret, OSP-P200L CNC, 2008
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: IMPACT LU45
Year: 2008
Capacity, Max Swing Over Bed: 33.0", Max Turning Diameter: 22.0", Max Turning Length: 78.7", Distance Between Centers: 80", Spindle Bore: 10.5", Travels, X-Axis Travel: 11.8", Z-Axis Travel: 80.0", Rapid Traverse (X/Z): 393 / 196 IPM, Main Spindle, Chuck Size: 24", Chuck Type: 3-Jaw Chuck, Bar Capacity: 10.5", Spindle ...more
Okuma #LB-3000EX-MYC950, Multi-Axis CNC Lathe, 22.8" swing, 37.4" machining length, 13.3" turning diameter, 10" chuck, 30 HP, 5000 RPM, 2011
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: LB-3000EX-MYC950
Year: 2011
SWING OVER BED 22.8", SWING OVER SADDLE 18.5", MAX CUTTING DIAMETER 13.3", MAX CUTTING LENGTH 39", DISTANCE BETWEEN CENTERS 39", X-AXIS TRAVEL 10.2", Y-AXIS Yes, Y-AXIS TRAVEL 4.72" (+ 2.76"/- 1.97"), Z-AXIS TRAVEL 39.7", C-AXIS INDEXING FULL C-AXIS, CHUCK SIZE 10", BAR CAPACITY 2.6", SPINDLE BORE 3.1", SPINDLE NOSE ...more
Okuma #LOC-650, 4" Axis Horizontal CNC Turning Center, 68" machining length, 40" swing, 25" turning diameter, 33" chuck, 14.7" bar, 60 HP, 500 RPM, OSP 200L CNC, 2011
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: LOC 650
Year: 2011
2011 OKUMA LOC 650, Swing. 31.5", Machining Length. 68.89", Chuck Size. 32", Power. 50 hp, Max RPM. 500 RPM, Weight. 50,000 LBS..
Okuma #LOC-650, 4-Axis CNC Multi-Axis Twin Turret Lathe, 40.5" swing, 25.59" turning diameter, 32" chuck, 22" bar, 60 HP, 500 RPM, tailstock, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: LOC 650
Year: 2006
CNC Control: yes, Type of CNC Control: OSP E100L CONTROL, # Axis: 4, Chuck Size: 32 inches, Swing: 40.55 inches, Turning Diameter: 25.59 inches, Bar Capacity: 22 inches, Spindle Bore: 22 inches, X Axis Travel: 12.99 / -5.51, 10.04 / -0.59, Z Axis Travel: 80.31", 39.96", Spindle Speed (RPM): 500, Main Motor: 60 HP ...more
Okuma #LU-400/2SC650, 4-Axis CNC lathe, 25.5" swing, 26.5" centers, 3.1"/4.33" bar, 2006
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: LU-400/2SC650
Year: 2006
Capacity:, Max Turning Diameter: 16.54, Max Turning Length: 25.59, Max Bar Capacity: 3.15/4.33?, Max Swing over bed: 25.59, Max Swing over carriage: 16.54, Distance between Centers:26.59, Max Weight between Centers: 1320 lbs, Travels:, X Axis Travel Upper: 11.73, X Axis Travel Lower: 7.67, Z Axis Travel Upper: 26.57 ...more
Okuma #Multus-U4000, 5" Axis CNC Turning & Milling Center, 25.5" swing, 78.74" machining length, 25.59" turning diameter, 30 HP, 4200 RPM, 2016
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: MULTUS-U4000
Year: 2016
OKUMA MULTUS U4000, Swing. 25.59", Machining Length. 78.74", Power. 30 hp, Max RPM. 4,200 RPM, Turning Dia. 25.59", Live Tooling. Yes.
Samsung #SL-45MC/2200, CNC Lathe, 30.5" swing, 88.8" machining length, 24.4" turning diameter, 24" hydraulic chuck, 50 HP, 1800 RPM, Fanuc 0i-TD control, 2012
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Samsung
Model: SL 45MC/2200
Year: 2012
2012 SAMSUNG SL 45MC/2200, Swing. 30.5", Machining Length. 88.8", Chuck Size. 24", Bar Capacity. 4.63", Power. 50 hp, Max RPM. 1,800 RPM, Turning Dia. 24.4", Control. CNC (Fanuc), Weight. 32,500 LBS.
Takisawa #NEX-110, CNC Lathe, 19.4" swing, 25.87" machining length, 15.75" turning diameter, 10" hydraulic chuck, 3500 RPM, chip conveyor, Fanuc 0i-TD control
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Takisawa
Model: NEX-110
TAKISAWA NEX-110, Swing. 19.49", Machining Length. 25.87", Chuck Size. 11.81", Bar Capacity. 3.03", Max RPM. 3,500 RPM, Turning Dia. 15.75", Control. CNC, Dimensions. 98 x 70 x 68 in, Weight. 7500 lbs.
Weiler #E90/3, CNC Flatbed Lathe, 36" swing, 120" machining length, 32" 4-jaw chuck, 14" spindle bore, 60 HP, 500 RPM, 2007
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Weiler
Model: E90/3
Year: 2007
2007 WEILER E90 / 3, Swing. 36", Machining Length. 120", # Axis. 2, Chuck Size. 32", Bar Capacity. 14", Power. 60 hp, Max RPM. 500 RPM, Tailstock. Yes, Spindle Bore. 14".
CNC Plasma Cutting Systems (Flame Cutters)
1 Result
Hornet Cutting Systems, Retro Systems, plasma cutting machine, 10' x 20', Hypertherm HPR260, water table, 2015
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hornet
Year: 2015
Cutting Length: 240" inches, Cutting Width: 120" inches, Welding System: Hypertherm HPR260 Plasma Power Source, MAX CUTTING WIDTH: 120", MAX CUTTING LENGTH: 240", FREE STANDING CONTROL PENDANT, WATER TABLE, HYPERTHERM HPR260 PLASMA POWER SOURCE, AVAILABLE CONSUMMABLES.
CNC Vertical Boring Mills – including VTLs
5 Results
23.5" Emag #VMC450-5MT, 5-Axis vertical turning center, Siemens840 Dsl CNC Control, 31" swing, 2021
Category: CNC Vertical Boring Mills – includin...
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Emag
Model: VMC450-5MT
Year: 2021
CHUCK DIAMETER: 24", MAX WEIGHT: 1100 LBS., MAX SWING DIAMETER: 31", MAX TURNING DIAMETER: 23.5", X STROKE: 30", Z STROKE: 19", MAIN DRIVE:, POWER: 100 HP, FULL POWER AT 800 RPM, MAX SPINDLE RPM: 2,000, C AXIS POSITIONIONG TO.01MM ANGULAR DEGREES, FEED DRIVE:, RAPIDS Z / Z: 60 / 30 M / MIN., FEED FORCE X / Z 4 / 15 ...more
29.5" Youji #CTV-900, Vertical Turning Center, 35.4" swing, 23.6" machining length, 24" chuck, 30 HP, 1500 RPM, 2026
Category: CNC Vertical Boring Mills – includin...
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Youji
Model: CTV-900
Year: 2026
2026 YOU JI CTV-900, Swing. 35.4", Power. 30 hp, RPM. 1,500 RPM, Chuck Size. 24", # Axis. 3, Turning Dia. 29.5", Machining Length. 23.6", Live Tooling. Yes, Control. CNC.
55" Youji #YV-1200ATC, Ram-Type Vertical Turning Center, 63" swing, 49" table diameter, 50" work height, 45 HP, 350 RPM, 2026
Category: CNC Vertical Boring Mills – includin...
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Youji
Model: YV-1200ATC
Year: 2026
2026 YOU JI YV-1200ATC, Table Dia. 49", Swing. 63", Work Ht-U/R. 50", Power. 45 hp, Max RPM. 350 RPM, Turning Dia. 55.1", Live Tooling. Optional, Control. CNC.
124" Bullard #Dyn-Au-Tape, 2-Axis CNC vertical boring mill, Fanuc 15TT, power rail clamping, 75 HP, 1972
Category: CNC Vertical Boring Mills – includin...
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bullard
Model: DYN-AU-TAPE
Year: 1972
Table Dia.: 124" inches, Work Ht-U/R: 71" inches, Dimensions: 265H x 181W x 239F-B, Weight: 192700 pounds, Ram Head Vertical Stroke 71" inches, Ram Head Horizontal Travel: 76" inches, Ram Width: 12.75" inches, Table Speed: 37 - 66 RPM, Table Capacity: Radial - 167,337 lbs., Table Capacity: Thrust - 400,312 lbs. ...more
EMAG #VL-3-Duo, CNC Twin Spindle Vertical Turning Lathe, live tooling, 2018
Category: CNC Vertical Boring Mills – includin...
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Emag
Model: VL-3-DUO
Year: 2018
2018 EMAG VL3 DUO.
42" width x 30" L x 48" H Cram-A-Lot #VB-42-B, Vertical Baler
Category: Downstroke (Vertical) Balers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cram-A-Lot
Model: VB-42-B
Standard s include:, Made in the USA, ANSI Z245.5 Compliant, Key Operated Controls, Quiet Operating Vane Pump, Gas Spring Assisted Loading Door, Electro-Magnet Safety Lock, Side Mounted Power Unit, Patented Bale Eject System, UHMW Ram Guides.
Drill & Mill Box Tables
2 Results
Box table for radial arm drill, 23 -3/4" x 17 -3/4" x 17 -3/4", 2 sided, T-slotted
Category: Drill & Mill Box Tables
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Model: BOX TABLE FOR RADIAL ARM DRILL
Box Table for Radial Arm Drill, Size: 23-3/4" x 17-3/4" x 17-3/4", Two Sided, T-slotted.
Box table for radial arm drill, 24 x 18 x 18, 2 sided, T-slotted
Category: Drill & Mill Box Tables
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Model: BOX TABLE FOR RADIAL ARM DRILL
Type: Box Table for Radial Arm Drill, Size: 24" x 18" x 18", Two Sided, T-Slotted.
Tru-Spot #GR800, Pneumatic Center Drill
Category: Drill Tooling
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Tru-Spot
Model: GR800
TRU-SPOT GR800.
17" x 39" Cazeneuve #HB500, engine lathe, 40-3200 RPM, 12" 3-jaw chuck, square tool post, inch/metric
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cazeneuve
Model: HB500
Centers: 39", RPM 40 to 3200, Square Tool Post, 12" 3-Jaw Chuck, Inch/Metric Thread.
22" x 60" SunMaster #CH-2260, engine lathe, 13.38" swing over cross slide, 3-jaw 12" chuck, Newall digital read out, new
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Sunmaster
Model: CH-2260
Year: 2025
Swing Over Bed: 22", Swing Over Cross Slide: 13.38", Swing in Gap: 31.37", Gap Width: 10.6", Distance Between Centers: 60", Bed Width: 15.7", Center Height: 42", Spindle Speeds: (12) 13 - 1200 RPM, Spindle Motor: 15 HP, Spindle Bore: 4-1/16", Spindle Taper and Center: MT-7 / MT-5, Spindle Nose: D1-11, Feed Ranges: 16 ...more
24" x 72" Leblond Regal, Engine Lathe, 5" hollow spindle, 460 V.
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Leblond Regal
Model: 24 X 72
Swing Over Bed: 24", Swing Over Cross Slide: 18.25", Distance Between Centers: 72", Spindle Bore: 5", Spindle Speeds: 12, Speed Range: 16 - 1,200 RPM, Feed Range: 0.0036" - 0.205" IPR, Threading Range: 2 - 112 TPI, Main Motor: 20 HP, Electrical: Dual Voltage Option - 460V / 3 Phase or 220V / 3 Phase, Approximate ...more
28" x 48" American #Pacemaker, engine lathe, 4-jaw 21" chuck, 3-jaw 18" chuck, face plate
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: American
Model: PACEMAKER
Capacity, Swing Over Bed: 28", Swing Over Cross Slide: 18", Distance Between Centers: 48", Spindle, Maximum Spindle Speed: 800 RPM, 21" 4-Jaw Chuck, 18" 3-Jaw Chuck, Face Plate, Coolant System, Aloris Tool Post.
28" x 48" American Pacemaker #30x54, Engine Lathe, 19.5" socs, 24" 4-jaw chuck, 2.5" spindle bore, 40 HP, 1600 RPM
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: American Pacemaker
Model: 30 X 54
Capacity, 28" Swing Over Bed, 19.5" Swing Over Cross Slide, 48" Between Centers, Spindle, 2.5" Spindle Bore, No. 5 Morse Taper, 24 - 1,600 RPM, Drive, 40 HP Main Motor, Feeds, 0.005" - 0.3012" IPR, 24" 4-Jaw Chuck, 15" Steady Rest, ** NO LEADSCREW FOR THREADING **.
28" x 144" Boye & Emmes, Engine Lathe, 20" socs, 18" 4-jaw chuck, 436 RPM
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Boye & Emmes
Model: 28 X 144
Capacity, Swing Over Bed: 28", Swing Over Cross Slide: 20", Distance Between Centers: 144", Spindle, Maximum Spindle Speed: 436 RPM, Feeds & Threading, Feed Range: 0.002 - 0.154 IPR, Threading Range: 56 - 1 TPI, Chuck & Workholding, Chuck: 18" 4-Jaw Chuck, 11" Roller-Type Steady Rest, 7" Roller-Type Steady ...more
28.5" x 120" Summit #28X120B, Engine Lathe, 19-5/8" socs, 36.5" swing in gap, 64" thread, 15 HP, 16-1250 RPM
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Summit
Model: 28X120B
SUMMIT 28X120B, Centers. 120", Gap Swing. 0", Spindle Bore. 4.125", Thread Size. 64", Travel-Cross. 0", Motor. 15 hp, Max RPM. 1,250 RPM, Vertical Gap. 0".
30" x 118" Kingston #HK-3000, Manual Lathe, 20.75" socs, 22" bed width, 12.5" spindle bore, 20 HP, 300 RPM, Newall digital read out, 1990
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Kingston
Model: HK-3000
Year: 1990
Located in Houma, LA.
35.1" x 90" Sunmaster #CH-2690, Engine Lathe, 4" spindle bore, 15 HP, 1200 RPM, 2025
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Sunmaster
Model: CH-2690
Year: 2025
Swing Over Bed: 26", Swing Over Cross Slide: 17.5", Swing in Gap: 35.1", Gap Width: 10.6", Distance Between Centers: 90", Bed Width: 15.7", Center Height: 42", Spindle Speeds: (12) 13 - 1200 RPM, Spindle Motor: 15 HP, Spindle Bore: 4-1/16", Spindle Taper and Center: MT-7 / MT-5, Spindle Nose: D1-11, Feed Ranges: 16 ...more
40" x 120" Kingston #HR3000, Engine Lathe, 22" bed width, 31" socs, 32" chuck, 20 HP, Newall C80 digital read out, Aloris tool post
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Kingston
Model: HR3000
KINGSTON HR3000, Centers. 120", Spindle Bore. 4.125".
240" Tuda #Jumbo-40, engine lathe, 4-jaw 32" chuck, 3-point 30" roller steady rest
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Tuda
Model: JUMBO-40
Swing in Gap: 54", Chuck Size: 32", Swing: 40", Weight: 36500 pounds, Swing Over Cross Slide: 26", Power: 30 horsepower, Spindle Bore: 3.5", Centers: 240", Length of Gap: 22", Speed: (16) 6 - 590 RPM, Taper Attachment: yes, Inch Threads: yes, Metric Threads: yes, Rapid Traverse (X/Z): yes, Hardened Bed Ways: yes.
24" Giddings & Lewis, Facing Head
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Diameter: 24".
26" Davis #26, tool facing head CFF head
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Davis
Model: 26
Dimensions: 26", Feed Ranges: 0029 - 0392", 5" Thru Hole.
26" Giddings & Lewis Davis #CFF26, facing head, 5" thru hole, 0.0029 - 0.0392 feed range
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Model: CFF26
GIDDINGS & LEWIS CFF 26, DIAMETER: 26", THROUGH HOLE DIAMETER: 5", FEED RANGE: 0.0029 - 0.0392, Diameter. 26".
26" Giddings & Lewis Davis #CFF26, facing head, 5" thru hole
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
Model: CFF26
DIAMETER: 26", THROUGH HOLE: 5".
30" Giddings & Lewis Davis, facing head, mounting bracket & declutching unit to fit Nomura horizontal boring mill, used, #16536
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
DIAMETER: 30", HOLE DIAMETER: 5", FLANGE SIZE: 10", TOOL SLIDE CROSS TRAVEL: 14", MAXIMUM FACING DIAMETER: 44", MAX RPM: 140, FEEDS: 0.0029 - 0.039 IPR, WEIGHT (APPROXIMATE): 435 LBS., MOUNTING BRACKET, DECLUTCHING UNIT, RING GEAR.
36" Davis & Thompson #36, facing head CFF head
Category: Facing Heads
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Davis & Thompson
Model: 36
Filling Equipment (Fillers)
1 Result
Mettler Toledo drum filler, semi-automatic single container sub-surface filler, 55 gallon drum only
Category: Filling Equipment (Fillers)
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mettler
Mettler Toledo Drum Filler, Semi-Automatic single container sub-surface filler (Note: Metal 55 Gallon drum only, *All subject to verification.
Forklifts
2 Results
4000 lb. Landoll Drexel #FL40-EX, Explosion-Proof Forklift
Category: Forklifts
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Landoll Drexel
Model: FL40-EX
The EX range is UL listed for operation in Type EX Class I, Division I, Group D and Class II, Division I, Group G flammable hazardous areas., 4 Wheel Configuration Independently Driven, Front Wheels, Rear Wheel Steering, High Visibility Mast, 2, 3 or 4 Stage, 36 Volt Electrical System, Adjustable Drivers Seat, Safety ...more
5000 lb. Yale #ERC050VGN36TF083, Electric Forklift, 126" load height, 36-Volt battery system
Category: Forklifts
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Yale
Model: ERC050VGN36TF083
Year: 2012
2012 YALE ERC050VGN36TF083, Capacity. 5,000 lb.
Gantry Type Machining Center
1 Result
Johnford #DMC-4100H, CNC Moving Table Bridge Mill, 161.4" X Travel, 51.2" Y Travel, 31.5" Z, 45.3" x 165.3" table, 35 HP, 6000 RPM, 40 automatic tool changer, CAT 50, 2026
Category: Gantry Type Machining Center
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Johnford
Model: DMC-4100H
Year: 2026
2026 JOHNFORD DMC-4100H, X. 161.4", Y. 51.2", Z. 31.542", # Axis. 3, Power. 35 hp, RPM. 6,000 RPM, # ATC. 40, Table-W. 45.3", Table-L. 165.3", Taper. BT-50 / CAT-50 (HSK-100A opt.), Control. CNC.
Gap Frame Single Crank Press Machines
1 Result
66 Ton, Komatsu #H1F60, Servo-Driven Gap Frame Press, 35" x 21" bed, 4.72" stroke, 11.8" shut height, 2.56" slide adjustment, 85 SPM, 9 HP, 2009
Category: Gap Frame Single Crank Press Machines
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Komatsu
Model: H1F60
Year: 2009
KOMATSU H1F60, Tonnage. 66 T, Stroke. 4.7", Shut Height. 11.8", Power. 7 kW, Bed W. 21", Bed L. 35", SPM. 85 strokes/min..
Gear Reducers, With Driving Unit
1 Result
1510 HP, 1150 RPM, Philadelphia gear drive, 47 RPM output, 24.50 ratio
Category: Gear Reducers, With Driving Unit
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Philadelphia
Size-Type: AGMA Class 1, HP Rating: 1510, Input RPM: 1150, Output RPM: 47, Ratio: 24.5:1.
Gun and Deep Hole Drilling Machines
1 Result
4th Axis tubular counterbore & drilling machine, 30' max part length, (2) 15 HP drill heads
Category: Gun and Deep Hole Drilling Machines
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Maximum Part Length: 30', Drilling Heads: (2) 15 HP each, Z Positioning via Ball Screw, 4th Axis Rotation via Servo Motor, Note: All Subject to Verification.
Horizontal Band Saws
2 Results
16" x 20" W.F. Wells #F-16-1, Horizontal Band Saw, 1.25" x 0.042" x 15' blade, 7.5 HP, 60-425 RPM, 5000 lb. capacity, 3PH
Category: Horizontal Band Saws
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: W.F. Wells
Model: F-16-1
W.F. WELLS F-16-1, Rect-Cap (H). 16", Rect-Cap (W). 20", Rounds-Cap. 16", Square-Cap. 16", Power. 7.5 hp, Blade Width. 0.042", Blade Thickness. 1", Blade Length. 15', Dimensions. 97 Length x 49 Width x 83.
25" x 44" Hem #WF190LA-DC, horizontal automatic band saw, 25" round, 70-500 SFPM, 1998
Category: Horizontal Band Saws
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hem
Model: WF190LA-DC
Year: 1998
1998 HE&M WF190LA-DC, Rectangular Capacity: 25" x 44", Round Capacity: 25", Blade Speeds: 70 - 500 SFPM, Blade Motor: 15 HP, Hydraulic Motor: 5 HP, Blade Size: 29' x 2" x 0.063", Permanent Arm Tilt: 9.2 Deg., OAD (Approximate): 175" x 119" x 119" High, Weight (Approximate): 13,500 Lbs., HEM Saw offers the ...more
Century Machine #75H-36, Horizontal Honing Machine, 19" outside diameter, 1.5"-14" inside diameter range, 36" stroke, 15 HP pump, 20 HP main motor, 460 Volt, 1998
Category: Horizontal Hones
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Century
Model: 75H-36
Year: 1998
Century Machine Inc. Horizontal Honing Machine, Model 75H-36, S/N 998003, 36' stroke, 19.0" Max. O.D., 1.5" through 14.0" I.D. range, 20 HP rotation motor, 3 mandrel supports, paper coolant filtration, 2 workpiece clamps, 15 HP fluid pump, 460V, OAD (approx.):, Machine: 87' length, 6' width, 5' height ...more
90 Ton, Cincinnati #90AF Autoform, hydraulic press brake, 10' overall, 102" between housing, 14" stroke
Category: Hydraulic Press Brakes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cincinnati
Model: 90AF
CINCINNATI INC 90AF 8FT Hydraulic Press Brake, Capacity: 90 Tons, Overall Length: 10 ft., Distance Between Housings: 102 in. (8' 6"), Stroke: 14 in., Closed Height: 12 in., Bed Height Above Floor: 34 in., Bed Crown: 0.001 in., Ram Tilt Limit: 1 in., CNC Control: Cincinnati (Updated Control), Approximate Weight: ...more
400 Ton, General Hydraulics #410-DH400-36, 4-post hydraulic press, 24" Shut Height, 25 HP
Category: Hydraulic Presses
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: General Hydraulics
Model: 410-DH400-36
Press Capacity: 400 tons, Press Type: 4-Post Hydraulic, Press Ram Diameter: 8 inches, Shut Height: 24 inches, Main Motor: 25 HP, Skid Base Dimensions: 56" x 36" x 20", Base Height: 40 inches, Skid-mounted.
Lincoln Electric, robot welding system w/6-axis robot, 300 kg Head & Tailstock, 2021
Category: Industrial Robots
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Lincoln
Model: ROBOT WELDING SYSTEM W/6-AXIS ROBOT
Year: 2021
MAIN EQUIPMENT:, ABB IRB 2600ID-8 2.0 SIX AXIS ROBOT PACKAGE, HEADSTOCK/TAILSTOCK 300KG SERVO POSITIONER, BULLSEYE TCP CALIBRATION SYSTEM, LINCOLN POWER WAVE R450 WELDING PACKAGE, POWER WAVE SST MODULE, AUTODRIVE 4R220 WIRE FEEDER, LINCOLN MAGNUM PRO AIR COOLED THRU-ARM WELDING TORCH PACKAGE, BINZEL SINGLE WIRE TORCH ...more
6" x 6" x 1/2" Uni-Hydro #PRO-80-24, Hydraulic Ironworker, 80 ton, 9" throat depth, 2000 psi hydraulics, 16-gallon oil tank, 7.5 HP, 220 Volt, 2020
Category: Ironworkers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Uni-Hydro
Model: PRO-80-24
Year: 2020
Key and Capabilities, Tonnage: 80 Tons, Punch: 1-3/8" hole in 3/4" mild steel (standard), or 2-1/4" hole in 7/16" mild steel, Bar Shear: 1/4" x 24", 1/2 x 20, 3/4 x 10, 1 x 6, Angle Shear (90): 6" x 6" x 1/2" slug type, Angle Shear (45): 4" x 4" x 1/2", Throat Depth: 9", Motor: 7.5 HP (Standard 220V/3PH; optional ...more
1/16" x 1-1/2" Davis #15, Keyseater, 20" x 31" table, 45 SPM, 4"-18" max. cut length, 19" throat, 2 HP
Category: Keyseaters
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Davis
Model: 15
Keyway Cutting Capacity: 1/16 to 1-1/2 (in steel), Throat Depth: From face of 1 cutter to arm post: 19, Maximum Height of Work: Standard: 12, Maximum Length of Cut: 16 long cutter: 4, 20 long cutter: 8, 24 long cutter: 12, 30 long cutter: 18, Table Size: 20 x 31, Table Travel: 1-1/2, Strokes per Minute: Stroke: 4-1/2 ...more
24" ATS #BT-10.8-ES, 3-jaw big mouth air chuck, serial #U0659
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Ats
Model: BT-10.8-ES
"Chuck Size","24","inches"; "Jaws","3","".
24" Cushman, 4-jaw heavy duty power wrench combination chuck with 8-1/8" hole, A2-15 mount
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cushman
DIAMETER: 24" 4-JAW, TYPE: COMBINATION SCROLL / INDEPENDENT, MOUNT: A2-15, HOLE: 8-1/8".
24" SMW Autoblok #BB-N-600-275-3-ES, 3-jaw air chuck, serial #1380
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Smw
Model: BB-N-600-275-3-ES
24” 3 Jaw SMW Autoblock Air chuck, 1000 RPM, S/N: 1380, 11” Thru Hole with Adapter., APPEARS TO BE UNUSED.
24" Manual 4-jaw chuck with 8" thru hole, A2-15 mount
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Chuck Diameter: 24", Jaws: 3 (2-Pc.), Mount: A2-15, Bore: 8".
25-1/2" Rohm #LVE630AZ/EZ, 3-jaw extended stroke air chuck, 11" thru hole, 1" jaw stroke
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Rohm
Model: LVE630AZ/EZ
Rohm Extended Stroke Air Chuck - LVE 630 AZ/EZ, 25 1/2" DIAMETER, 1" JAW STROKE, 3 Jaw, 11" Thru Hole.
32" 3-Jaw chuck, 10.5" thru hole with A-15 mount
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
"Chuck Size","32","inches"; "Jaws","3",""; "Thru-Hole","10.5","inches".
32" 3-Jaw chuck with 36" adapter plate
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
36" Adapter Plate Included, Note: All Subject to Verification.
34" Rohm, 860mm hydraulic indexing chuck with hydraulic power unit
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Rohm
Chuck Diameter: 34" (860 mm), Manufacturer: Rohm, Type: Hydraulic Indexing Chuck, Hydraulic Power Unit.
Material Handling Equipment
2 Results
Dalmec #PMC, Industrial Manipulator, 65 lbs. max. load, 2012
Category: Material Handling Equipment
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Dalmec
Model: PMC
Year: 2012
2012 DALMEC Manipulator Process Pipe Cell (PPC) is a compact and portable manipulator with programmable oscillation designed to revolutionize pipe welding productivity. Versatile and compatible with various welding power sources and wire feeders, including Miller PipeWorx and Lincoln Power Wave systems, PPC allows for ...more
shielding enclosure w/ overhead jib crane & electr, 500 lb. crane capacity, 1/2" thick polycarbonate shielding, 9' H x 6'-7" width x 8'-7" D, 30" sliding door opening
Category: Material Handling Equipment
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Crane
UNKNOWN _UNKNOWN_.
Weingrtner Maschinenbau #VARIO-500/8000, 5-Axis CNC Peeling/Milling Machine, 5.12" max. peeling diameter, 6.7" max. milling diameter, 314.96" machining length, 2003
Category: Mills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Model: VARIO-500/8000
Year: 2003
WEINGARTNER VARIO 500/8000 5-AXIS CNC PEELING/MILLING MACHINE, Maximum Peeling Dia.: 5.12, Maximum Milling Dia.: 6.7, Maximum Machining Length: 314.96, NUM 1020 CNC Control with HMI, DNC Computer Stand & Processor, PWE-G-210 Peeling Head, PFE-G-260 Milling Head, Large Compliment of Peeling Rings, Indexable Peeling ...more
Oil Field and Hollow Spindle Lathes
4 Results
27" x 120" Lehmann #2516, oil field & hollow spindle lathe, automatic threading, 4-jaw chucks
Category: Oil Field and Hollow Spindle Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Lehmann
Model: 2516
Swing Over Bed: 27.5 in., Swing Over Carriage: 18.5 in., Distance Between Centers: 120 in., Spindle Bore: 12 in., Spindle Motor: 30 HP, Spindle Speeds: 10 - 397 RPM, Number of Spindle Speed Ranges: 16, Feed Rates: 54 feeds, 0.005 - 0.326 IPR, Threading Range: 54 threads, 36 - 5/8 TPI, Tailstock Spindle Diameter: 4-7/8 ...more
35" x 120" Vantage #PA-35, Hollow Spindle Oil Country Lathe, 12.5" spindle bore, 300 RPM, 2006
Category: Oil Field and Hollow Spindle Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Vantage
Model: PA-35
Year: 2006
Hollow Spindle Oil Country Lathe, Swing over bed: 35", Swing over cross slide: 24", Distance Between Centers: 120", Spindle Bore: 12.5", Spindle speed: 300 RPM Max, Inch / Metric Threading, Taper Attachment, Front and Rear 4 Jaw Chucks, 2 Speed Tailstock, (2) Steady Rests, 440 VOLT, NEW 2006.
CRI Dan #HT24, CNC hollow spindle Oil Counbtry lathe, Fanu Control, front & rear chucks, 24" bore, 1989
Category: Oil Field and Hollow Spindle Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cri
Model: HT24
Year: 1989
Front & Rear Chucks, Extended Stroke, Front Chuck is self-centering.
Weiler #E90, Oil country hollow spindle CNC lathe, 14" bore, 120" cc, 4-jaw 32" chuck, mint, 2007
Category: Oil Field and Hollow Spindle Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Weiler
Model: E90
Year: 2007
CNC Control: yes, Type of CNC Control: WEILER D3 Generation Controller, Chuck Size: 32" inches, Swing: 36" inches, Center Distance: 120" inches, Bar Capacity: 14" inches, Spindle Bore: 14" inches, Z Axis Travel: 120" inches, Spindle Speed (RPM): 500, Main Motor: 60 HP, Tailstock: yes, Power: 60 horsepower, # Axis: 2.
Arc Specialties #Tripulse, 42' dual hot wire GTAW pipe cladding system, 2015
Category: Pipe Machinery
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Arc Specialties
Model: TRIPULSE
Year: 2015
NOTE: AS WRITTEN BY ARC SPECIALTIES, PIPE LENGTH CAPACITY: 42', PROCESS: HOT WIRE GAS TUNGSTEN ARC WELDING, BASE MATERIAL: 4130, FILLER WIRE: 1/16", MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO ...more
Arc Specialties, LP pipe inspection system for dye penetrant testing, 40' pipe length, 2015
Category: Pipe Machinery
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Arc Specialties
Year: 2015
NOTE: AS WRITTEN BY ARC SPECIALTIES, PROCESS: LP DYE PENETRANT TESTING, DYE: FLUORESCENT, MAXIMUM PIPE LENGTH: 40', LP PIPE INSPECTION:, The dye-penetrate will have a steel structure with guide ways to allow the head assembly carriage to move along while testing. The test head assembly mount is secured to the ...more
Griffith #Torquemaster-1689, Hydraulic Breakout Machine, 5000-150,000 lb.-ft. makeup torque capacity, 190,000 lb.-ft. max. breakout torque, 3.5"-14" headstock/tailstock capacity
Category: Pipe Machinery
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Griffith
Model: TORQUEMASTER
3-1/2" to 14" clamping range, Makeup torque up to 150,000 ft-lb, Breakout torque up to 190,000 ft-lb max, Hydraulic pipe spinner, Push/Pull assembly, Hydraulic support stands, OEM control console.
Peck-O-Matic #637, Bucking Unit, 1-15/16" to 7-5/8" outside dimension range, 1-5/16" to 6-5/8" pipe size range, 300-11,000 ft-lbs., 166 RPM
Category: Pipe Machinery
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Peck-O Matic
Model: 637
PECK-O MATIC 637.
Phosphate Line, pass through tubular threaded-end phosphate line
Category: Pipe Machinery
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Plain Cylindrical Grinders
2 Results
14" x 20" Churchill, Plain Cylindrical Grinder
Category: Plain Cylindrical Grinders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Churchill
CHURCHILL _UNKNOWN_.
16" x 120" Cincinnati #OM, plain cylindrical grinder, 30" x 3" x 12" grinding wheel, 20 HP
Category: Plain Cylindrical Grinders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cincinnati
Model: OM
Spindle Motor: 20 HP, Workhead Speed: 0 - 72 RPM, Swing: 16", Wheel RPM: 830, Grinding Wheel Dia.: 30", Centers: 120".
Power Squaring Shears (Inch)
1 Result
1/4" x 12' Niagara #SP-12-1/2, hydraulic shear, 36" front operated back gauge, 7.5 HP, 12 hold downs, 1990
Category: Power Squaring Shears (Inch)
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Niagara
Model: SP-12-1/2
Year: 1990
Maximum Thickness (Mild Steel): 1/4", Maximum Thickness (SS): 3/16", Blade Length: 12', Back Gauge Range: 36", Holddowns: 12, Motor: 7.5 HP, Front Operated Back Gauge, Inch and Single Modes, Foot Pedal, Rake and lade Clearance Adjustment, Flush Floor Mount, Squaring Arm.
Power Tank Turning Rolls
1 Result
Profax, set of adjustable turning rolls on heavy duty frame with foot pedal
Category: Power Tank Turning Rolls
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Profax
Set of PROFAX Adjustable Turning Rolls on Heavy Duty Frame with foot pedal 93"L x 45"W x 40"H.
4' -9" Carlton, radial drill
Category: Radial Drills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Carlton
CARLTON 3A, Arm Length. 3', Column Dia. 9", Power. 15 hp, RPM. 1,200 RPM.
4' -11" Carlton #1A, radial arm drill, #4MT, 5 HP, 1500 RPM
Category: Radial Drills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Carlton
Model: 1A
ARM LENGTH: 4', COLUMN DIAMETER: 11", DRILLS TO CENTER OF CIRCLE: 96", HORIZONTAL HEAD TRAVEL ON ARM: 39", VERTICAL ARM TRAVEL ON COLUMN: 28.5", SPINDLE TRAVEL IN HEAD: 12", SPINDLE DIAMETER: 2.5", SPINDLE SPEEDS: 1500 RPM, SPINDLE MOTOR: 5 HP, SPINDLE TAPER: MORSE #4, NOTE: ALL SUBJECT TO VERIFICATION, **NOTE: ...more
4' -11" Cincinnati Gilbert, radial drill
Category: Radial Drills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cincinnati
4' -13" Carlton, radial drill
Category: Radial Drills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Carlton
Clutch Spindle Actuation - Forward / Reverse, No. 5 Morse Taper, Tap Leads, Rapid Traverse to Head, Power Clamping - Head and Column.
4' -14" Caser #4x14, Radial Drill
Category: Radial Drills
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Caser
Model: 4X14
CASER 4x14, Arm Length. 4', Column Dia. 14".
Ram (Die Sinker) EDM
1 Result
Chmer #AH53C, Sinker Electrical Discharge Machine, 24.8" x 12.2" work area, 19.69" X, 11.81" Y, 13.39" Z, 0.118" max. hole diameter, 220/380 Volt, 2012
Category: Ram (Die Sinker) EDM
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Chmer
Model: AH53C
Year: 2012
2012 CHMER AH53C, Hole-Dia. (Min). 0.2 mm, Hole-Dia. (Max). 3 mm, Work-W. 310 mm, Work-L. 630 mm, X. 500 mm, Y. 300 mm, Z. 340 mm.
48" x 48" Square air lift T-slotted rotary table
Category: Rotary Tables
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
_UNKNOWN_ _UNKNOWN_, 48" Square Air Lift T-Slotted Rotary Table, Width. 48", Length. 48".
64" Manual Horizontal Rotary Table
Category: Rotary Tables
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Model: 63
(3) Speed Ranges, Power Locking: 90 Degree (4), Manual Position Clamps (3).
Steel Slat and Chip Conveyors
1 Result
Tsubaki #D60W15ST-SW, chip tote chipconveyor
Category: Steel Slat and Chip Conveyors
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Tsubaki
Model: D60W15ST-S
TSUBAKI D60W15ST-SW, Dimensions: 228" x 36" x 75: High, From: Mazak ST-60-2500 CC Lathe.
Swiss Type and Lathe CNC Automatic Screw Machines
2 Results
DMG, Mori #Sprint-32/8, CNC screw machine, Swiss type, 8-Axis, Fanuc 32i-B Plus, 2018
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Dmg
Model: SPRINT-32/8
Year: 2018
Nexturn #SA-38PII, CNC Swiss type lathe, 7-Axis, 1.496" bar diameter, 10 HP main, sub spindle, Fanuc 0iT-F Plus, 2025
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Nexturn
Model: SA-38PII
Year: 2025
Machine Capacity, - Maximum Bar Turning Diameter 1.496" (38mm), - Maximum Bar Turning Length 9.8" (250mm), - Maximum Main Spindle Drilling / Tapping.5 (12mm) /.4 (10mm), - Maximum Sub Spindle Chucking Diameter 1.496" (38mm), - Maximum Back End Face Drilling / Tapping.5 (12mm) /.4 (10mm), - Maximum Cross Drilling / ...more
Giddings & Lewis tool holder, 20-3/8" length, 5-11/16" holder width
Category: Tool Holders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Giddings & Lewis
LENGTH: 20-3/8", HOLDER WIDTH: 5-11/16".
Caterpillar 40, pallet of tool holders
Category: Tool Holders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Tooling and Accessories - Miscellaneous
1 Result
32" x 28" T-slotted tilting box table, 90° tilt
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Table Size (Top): 32" x 28", Table Size (Side): 28" x 18", Table Height: 24", T-Slots (Top): (4) 1-1/2" at 5-1/8" Centers, T-Slots (Side): (3) 1-1/2" at 5-1/8" Centers, Table Tilt: 90 Deg.
Universal Milling Machine - Horizontal
1 Result
Vanguard #X6140, universal knee horizontal milling machine, 3-Axis digital read out, horizontal spindle with arbor support, power feeds, universal swiveling table, coolant pump & piping, 2008
Category: Universal Milling Machine - Horizontal
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Vanguard
Model: X6140
Year: 2008
TABLE SIZE: 67" X 15.7", T-SLOTS: 3 (0.7" AT 3.5" CENTERS), TABLE LOAD CAPACITY: 1,760 LBS., TABLE SWIVEL: ±45 DEG., TABLE LONGITUDINAL TRAVEL: 35.4" MANUAL / 34.6" AUTO, TABLE CROSS TRAVEL: 12.4" MANUAL / 11.8" AUTO, TABLE VERTICAL TRAVEL: 14.96" MANUAL / 14.17" AUTO, SPINDLE SPEEDS: (18) 30 - 1500 RPM ...more
Vertical Band Saws
1 Result
Morrison, Vertical Band Saw
Category: Vertical Band Saws
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Morrison
MORRISON k.
Vertical Boring Mills & VTL's
5 Results
42" Bullard #42-CutMaster, Vertical Turret Lathe, 54" swing, 37" work height, 30 HP, 150 RPM
Category: Vertical Boring Mills & VTL's
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bullard
Model: 42-CUTMASTER
4 Jaw Chuck, 5 Sided Turret on Rail, Side Head, Excellent Condition - Inspect Under Power.
54" Bullard #Cutmaster, VBM/VTL, 4-jaw chuck w/hard jaws & risers, HD ram left w/DRO, 5 sided turret right w/DRO
Category: Vertical Boring Mills & VTL's
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bullard
Model: CUTMASTER
, 4 JAW INDEPENDENT CHUCK, HEAVY ROUND TILTING RAM - LEFT, 5 SIDED TILTING TURRET - RIGHT, SIDE HEAD, RAPID TRAVERSE CONVERSION KIT, *MACHINE HAS BEEN FULLY CHECKED OUT AND IS READY TO RUN., **EXCELLENT RUNNING, QUIET MACHINE..
54" Bullard #Cutmaster-54, vertical turret lathe, 5 position turret head, side head, assorted tooling
Category: Vertical Boring Mills & VTL's
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bullard
Model: CUTMASTER-54
BULLARD CUTMASTER 54, Table Dia. 54", Work Ht-U/R. 62", Power. 30 hp, RPM. 160 RPM.
88" Stanko #1525, vertical boring mill, 98" swing, 86" under rail, 55 HP, 4-Axis Mitutoyo digital read out, pendant Control, 1982
Category: Vertical Boring Mills & VTL's
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Stanko
Model: 1525
Year: 1982
TABLE DIAMETER: 88" (4-JAW CHUCK), SWING: 98", HEIGHT UNDER RAIL: 86", TABLE SPEEDS: 1.6 - 80 RPM, MAXIMUM WORK PIECE WEIGHT: 28,600 LBS., TURRET VERTICAL TRAVEL: 62", RAM SWIVEL: 30 DEGREES, SIDE HEAD TRAVEL: 38", MOTOR: 55 HP, OAD (WXDXH): 154" X 159" X 180", WEIGHT (APPROX.): 78,000 LBS..
108" Bullard #Dyn-Au-Trol-108, vertical boring mill, 1969
Category: Vertical Boring Mills & VTL's
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bullard
Model: DYN-AU-TROL-108
Year: 1969
1969 Bullard DYN-AU-TROL 108 Vertical Boring Mill, 108" table, 122" swing, 84" height under rail, 5-position turret, Power: 100hp, 480V, Includes side head for versatile machining operations..
Vertical CNC Machining Centers
6 Results
Mazak #VTC-250D/50, CNC vertical machining center, Mazatrol 640MN, 69.3" X, 25" Y, 25.6" Z, 6000 RPM, 24 automatic tool changer, 4th axis rotary table, 2005
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
Model: VTC-250D/50
Year: 2005
2005 MAZAK VTC-250D/50, Additional Options:, Transformer, 4th Axis Rotary Table, Chip Conveyor, Table Size-L. 82.7", Table Size-W. 25", X-Horiz Tvl of Col. 69.3", Y-Vert Tvl of Head. 25", Z. 25.6", Taper. CAT 50, Power. 30 hp, Rapid Traverse Speed. 1181 ipm, Spindle Speed. 6000 rpm, Tool Changer Capacity. 24, Control. ...more
Mori Seiki #NV-7000/50, CNC vertical machining center, MSX-504IV vtrl, 67" X, 30" Y, 26" Z, 10000 RPM, 60 automatic tool changer, Cat 50, 2011
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mori Seiki
Model: NV-7000/50
Year: 2011
CNC Control: yes, Type of CNC Control: Mori Seiki MSX-504IV CNC Control, Table Size: 96" x 30", X-Axis Travel: 67: inches, Y-Axis Travel: 30: inches, Z-Axis Travel: 26: inches, Spindle Speed: 10000, Spindle Taper: CAT 50, Tool Changer Capacity: 60, Rotary Table: 15-inch, Spindle Bore: 5-inch, Work Holding Type: Scroll ...more
OKK #KCV-800, CNC vertical machining center, Fanuc 160i, 120" X, 33" Y, 28" Z, 12000 RPM, 40 automatic tool changer, excellent, 2007
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okk
Model: KCV-800
Year: 2007
NOTE: 4TH AXIS NOT INCLUDED WITH SALE, SPINDLE OIL CHILLER, CHIP BLASTER HIGH PRESSURE COOLANT THROUGH THE SPINDLE, FANUC 160i CONTROL, AUGER TYPE CONVEYORS WITH REAR LIFT UP, FULL ENCLOSURE, RUNNING AND OPERATING.
Okuma #MCV-AII, CNC Double-Column Vertical Machining Center, 157" X, 78" Y, 18" Z, 51.5" x 36" rotary table, 30 HP, 4000 RPM, tailstock, Acu-Rite III digital read out, 2007
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Okuma
Model: MCV-AII
Year: 2007
OKUMA MCV-AII, Table, Table Size: 60" × 162", Travels, Number of Axes: 3, X-Axis Travel: 157", Y-Axis Travel: 78", Z-Axis Travel: 18", Spindle, Spindle Speed: 4,000 RPM, Spindle Taper: CAT 50, Main Motor: 30 HP, Tool Changer, Automatic Tool Changer Capacity: 72 Tools, Capacity, Maximum Distance from Spindle to ...more
Takumi #V11, CNC Vertical Machining Center, 45.2" x 25.6" table, 43.3" X, 26" Y, 24" Z, 20 HP, 6000 RPM, 24 automatic tool changer, CAT 50, 2015
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Takumi
Model: V11
Year: 2015
2015 Takumi Vertical Machining Center Model V11,Travels (X/Y/Z): 43.31" x 26" x 24.01" (1100 x 660 x 610 mm).Table Size: 45.28" x 25.59" (1150 x 650 mm).Spindle: Geared, 6,000 RPM, CAT50.Spindle Power/Torque: 14.8/20.1 HP (11/15 kW) or 15/18.5 kW options; ~387 ft/lb (524 Nm) peak torque.ATC: 24-tool Swing-Arm.Rapid ...more
Takumi #V20, vertical machining center, 70.8" X, 35.4" Y, 29.5" Z, 4500 RPM, 16 automatic tool changer, CAT 50, 30 HP, Fanuc 0i-MD
Category: Vertical CNC Machining Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Takumi
Model: V20
TAKUMI V-20 Vertical Machining Center, S/N N0286, Controller: FANUC 0i-MDX-Axis Travel: 70.87 (1800 mm)Y-Axis Travel: 35.4 (900 mm)Z-Axis Travel: 29.52 (750 mm)Table Size: 78.7 x 31.49, Table Load Capacity: 4,850 lbs (approx. 2,200 kg) Spindle Speed: 4,500 RPM, Main Motor30 HP, Tool Changer: 16 Automatic Tool Changer ...more
Ohio Tool Works #OTW-9000-20-1-10318, vertical hone, 4"-11" honing heads, 2 pos hydraulic rotary index table, 2012
Category: Vertical Hones
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Ohio
Model: OTW-9000-20-1-
Year: 2012
"Vertical Stroke","48"",""; "Maximum Fixtured Part Capacity","36"",""; "Spindle Output","10 300 RPM",""; "Reciprocation Rate","10 300 FPM",""; "Spindle Motor","20 HP",""; "Hydraulic Reciprocation","15 HP",""; "Voltage","480","".
Welding Machine Parts and Miscellaneous
1 Result
Arc Specialties #ARC-05HVT, Bore Cladding Machine, 32" chuck, 6500 lb. load, 2017
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Arc Specialties
Model: ARC SPECIALTIES #ARC-05HVT
Year: 2017
Chuck Size: 32", Table Capacity: 6500 lbs.
Welding Positioners
1 Result
44,000 lb. Steady-Weld #P20-F, Welding Positioner, 2020
Category: Welding Positioners
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Steady-Weld
Model: P20-F
Year: 2020
Load Capacity: 44,000 lbs, Center of Gravity: 16 in, Eccentricity: 12 in, Table Diameter: 86.6 in, Table Tilt Range: 0 to 130, Table Rotation Speed: 0.02 to 0.2 RPM, Rotation Torque: 531,000 lb-in, Rotation Motors: Two (2) 2 HP motors, Table Tilting Speed: 0.1 RPM, Tilting Torque: 708,000 lb-in, Tilt Motor: 4 HP ...more
Wire Machinery/Equipment - Miscellaneous
1 Result
Arc Specialties #Tripulse, 42' dual hot wire GTAW pipe cladding system, 2015
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Arc Specialties
Year: 2015
NOTE: AS WRITTEN BY ARC SPECIALTIES, PIPE LENGTH CAPACITY: 42', PROCESS: HOT WIRE GAS TUNGSTEN ARC WELDING, BASE MATERIAL: 4130, FILLER WIRE: 1/16", MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO ...more
