Die-Matic Tool & Machinery Inc.
Meridianville, AL 35758
Platinum Level Dealer
Surplus Record Dealer Since 1996
Contact
About
Die-Matic Tool Company focuses on tool and die manufacturing. We build aircraft frames, winch stands, automobile reproduction parts, turbine covers, expanded metal, sheet metal frames, and special tooling for antique products. We are located in Meridianville, Alabama. Please don't hesitate to reach out on any questions and if we can help you with a project you are working on!Products & Services
- Brakes, Press
- Drills
- Foundry Equipment
- Furnaces & Ovens
- Grinders
- Lathes
- Presses
- Rollformers
- Rolling Mills
- Saws
- Testing/Inspection Equipment
- Tube Machinery & Mills
Associations & Affiliations
80 listings in 52 categories
Bed and Knee Milling Machines - Vertical
3 Results
Alliant #1-1/2TMV, vertical miller, 9" x42" tbl., 2 HP, 30" X, 12" Y, 5" Z, 60-1750 RPM, R-8, 220 V., 3-phase
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Alliant
Model: 1-1/2TMV
Model: 1-1/2 TMV, S/N: 72032199, Table: 42"x 9", Spindle Speed: (Variable) 60 To 1750, Longitudinal: 30", Cross Travel: 12", Quill Travel: 5", Ram Travel: 12", Taper: R8, Head Swivels, Left to Right 90 Degrees Either Way, Head Tilts Front to Back 45 Degrees Either Way, Spindle Motor: 2 Horsepower, Volt: 220, Phase: 3.
Bridgeport #5KC180FJ222A, vertical mill, 24" x9" table, 3/4 HP, 1 Ph, 2720 RPM, 220 V.
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Bridgeport
Model: 5KC180FJ222A
Bridge Port Vertical Milling Machine, Model:5KC180FJ222A, HP: 3/4, PH: 1, RPM: 80/2720, Tabel: 24" x 9", Volt: 220, phase: 2.
Kearney & Trecker #2CSM, vertical mill, 3 HP, 28" X, 12" Y, 14" Z, #50, S/N 25-7105
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Kearney & Trecker
Model: -2CSM
KEARNEY & TRECKER PLAIN VERTICAL MILL, MODEL: 2CSM, S/N: #25-7105, LONGITUDINAL TRAVEL: 28", CROSS TRAVEL:12", VERTICAL KNEE TRAVEL: 14", VERTICAL HEAD TRAVEL: 4", SPINDLE YO TABLE: 0 TO 19", SPINDLE SPEEDS: (16) 50 - 1250 RPM, SPINDLE TAPER: #50, SPINDLE MOTOR: 20 HP, LONG & CROSS FEED RATES: (32) 3/8 - 90 ...more
C Frame Hydraulic Press Machines (Gap Frame)
1 Result
8 Ton, Multipress #WR87M, hydraulic c-frame press
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Multipress
Model: WR87M
Technical, Manufacturer: Multipress (formerly Denison), Model: WR87M C261, Serial Number: 30405, Tonnage Capacity: 8 Tons, Maximum Operating Pressure: 1,930 PSI, Reservoir Capacity: 10 Gallons, Frame Style: C-Frame (Open Back/Sides), Pump Model: T5C005, Controls & Performance s, Monitoring: Integrated dual-scale ...more
Carbide, Friction and Cold Saws
4 Results
5" Dake #370S, semi-auto non-ferrous cold saw, 1997, S/N #2697
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Dake
Model: 370S
Year: 1997
MODEL:370 S, S/N: 2697, CAN MITER UP TO 45 DEGREES, CAPACITY: TUBE.5", SOLIDS 3-5/8", SQUARE 4", RECTANGLES: 4"X 7", 4.5 HP DRIVE, WEIGHT 1350 LBS, LISTING ID#25530.
14" Drake, cold saw, 230 V., 3-phase, 2.5 HP, swivel base, vise
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Drake
(Dake) Condor 350 14" Coldsaw. This machine runs on 230 v 3 phase power. It has a 2.5 hp motor with 2 speed 14" blade. 20/40 RPM blade speed. Swivel base 45 degree L to R. : Electric Controls, Vise, Coolant in base cabinet..
Hyd-Mech, semi automatic cold saw, 2 C370-2SI heads, 14.5" blade, 2008
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Hyd-Mech
Year: 2008
HYD-MECH 2 HEAD SEMI AUTOMATIC COLD SAW, MODEL OF HEADS: C370-2SI, S/N: H-10-08-1118, NEW: 2008, MAX DISTANCE BETWEEN HEADS 62", CAPACITY: 4.76" ROUND SOILDS, CAPACITY: RECTANGULAR 7"X 4", MITER 60 DEG. LEFT, 45 DEG. RIGHT, HP OF HEADS 7.5, 14.5" BLADE, COOLANT SYSTEM, 480 VOLT 3 PHASE.
Kalamazoo #FS-350A, automatic ferrous, 1.2598" arbor diameter, 3.375" flang diameter, 13.75" blade, 6.25" vise
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Kalamazoo
Model: FS-350A
Kalamazoo Automatic Ferrous Cutting Saw, Model: FS-350A, S/N: 0939, Blade Speeds: 30/60 RPM, Blade Arbor Diameter: 1.2598", Flang Diameter: 3.375", Maximum Blade Size: 13.75", Maximum Vice Opening: 6.25", Work Height: 37.5".
Westfalia #OTB-2-00-066, 220/440 V., disc oil centrifuge, 9380 RPM, fluid clutch, 1994
Category: Centrifuges
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Model: OTB-2-00-066
Year: 1994
WESTFALIA DISC CENTRIFUGE, MODEL: OTB-2-00-066 OIL CENTRIFUGE, S/N: 5011299, NEW 1994, FLUID CLUTCH, 9380 RPM, 1 1/2 HP, 220/440 VOLT, CONTROL PANEL, GOOD CONDITION, LISTING ID#25517.
Koolant Koolers #HAV-5000-P-SO-CL, industrial chiller, 5 HP, 460 V.
Category: Chillers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Koolant Koolers
Model: HAV-5000-P-SO-CL
Machine Type: Industrial Air-Cooled Coolant ChillerManufacturer: Koolant Koolers, Inc. (Kalamazoo, MI)Model: HAV 5000-P-SO-CLSerial Number: 17097Technical, Compressor: 5.0 HP (Hermetic), Pump: 1.5 HP, Refrigerant: 10 Lbs. of R-22, Cooling Method: Air-Cooled (Top-discharge fan with side-entry condenser coils), Cabinet ...more
CNC Horizontal Spindle Surface Grinders
1 Result
12" x 36" Thompson #FSH-30/90, CNC surface grinder, Fanuc 3M, coolant, 10 HP, 1985
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Thompson
Model: FSH-30/90
Year: 1985
THOMPSON FSH30/90 CNC SURFECE GRINDER, S/N: MD3017, YEAR: 1985, CONTROL: FANUC, COPACITY: 12"X36", DYNAMIC BALANCER ON WHEEL, SERVO DRIVES ALL AXIS, COOLANT SYSTEM, CENTRAL LUBE SYSTEM, WAYS LIKE NEW, 10 HP SPINDLE DRIVE, 0 TO 3000 RPM VERIABLE SPINDLE, PNEUMATIC SAFETY DOORS, WEIGHT 15,000 LBS, LISTING ID#25545.
Mori Seiki #TL-40, turning center, Fanuc 15, 8 turret, hydraulic Steady Rest, tailstock, chip conveyor, 1991, #25544
Category: CNC Lathes and Turning Centers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Mori Seiki
Model: TL-40
Year: 1991
MORI SEIKI TL-40 18"X120" FLAT BED TURNING CENTER, MODEL:TL-40, S/N: 2000, YEAR: 1991, FANUC 15 CONTROL, FANUC SYMBOLIC PROGRAMMING, CENTER DISTANCE: 120", MAX TURNING DIAMETER: 18", HYDRAULIC STEADY-REST, 8 TOOL TURRET, 2.5" SPINDLE HOLE, TAIL STOCK, CHIP CONVEYOR, COOLANT, 220 VOLT 3 PHASE, 24'6"X8'X6' ...more
180 Ton, Cincinnati #Series-5, CNC brake press, 3" stroke, 6' Hurco Auto Bend Back Gauge
Category: CNC Press Brakes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Cincinnati
Model: SERIES-5
Key :, Tonnage Capacity: 135 Tons (Near Bottom) / 90 Tons (Mid-stroke)., Overall Bed/Ram Length: 10' (120")., Distance Between Housings: 8' 6"., Stroke Length: 3"., Ram Adjustment: 5" (Power)., Upgrades & Tooling:, Back Gauge: Hurco Auto Bend 6 CNC System., Included Dies: 12' Top Blade and 10' 2" ...more
CNC Tool and Cutter Grinders
2 Results
Haas #HT, CNC tool grinder, multigrind 5-Axis, 10 ATC, 28" X, 21.6" Y, 12" Z, HSK 50E, Siemens Sinumerik 840D, Renishaw L2P probe, 2005
Category: CNC Tool and Cutter Grinders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Haas
Model: HT
Year: 2005
HAAS MULTIGRIND 5 AXIS CNC GRINDER, MODEL: HT, S/N: 2818, YEAR: 2005, CONTROL: SIEMENS SINUMERIK 840 D, DISTANCE BETWEEN CENTERS: 15.2", TRAVELS: X=28" Y=21.6" Z=12", WORKTABLE:40"x 17.6", 10 POSITION ATC, IDF LASER TOOL PRESET, RENISHAW L2P PROBE, YOOL TAPER: HSK 50E, CRAFT & BAUER FIRE PROTECTION, COOLANT WITH ...more
Huffman #HS-155P, CNC tool & cutter grinder, 16" X, 16" Y, 16" Z, 5-Axis, Fanuc 15MB, automatic lube, 2002
Category: CNC Tool and Cutter Grinders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Huffman
Model: HS-155P
Year: 2002
HUFFMAN 5 AXIS CNC GRINDING SYSTEM, MODEL: HS155R, YEAR:2002, CONTROL 15MB, X,Y,Z, AXIS 16"X16"X16", A:AXIS (+45 TO-180 DEGREES)225 DEGREES, C:AXIS (+45 TO-180 DEGREES)225 DEGREES, WHEELHEAD 4000 TO 8000 RPM, 15 HP 460 VOLT 3 PHASE, AUTO LUBERCATION SYSTEM, HOFFMAN UBF COOLANT SYSTEM, LISTING ID#25542.
Buehler Specimen #10-1010, 230/460 V., 3-phase, extra holding vise, 5-extra diamond wheels, coolant, S/N 218-C-2437
Category: Cutoff Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Buehler
Model: 10-1010
Technical, Manufacturer: Buehler, Model: 10-1010, Serial Number: 218-C-2437, Machine Type: Abrasive Cut-Off / Metallurgical Specimen Saw, Condition: Excellent, Performance & Capacity, Motor: 1.5 HP, Cutting Capacity: Up to 2.5-inch solid bar stock, Arbor Size: 1.25", Wheel Size: Compatible with 10" ...more
Die Cutting Press Machines
1 Result
35 Ton, Samco #TH-35, die clicker press, 230 V., 3 KVA
Category: Die Cutting Press Machines
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Samco
Model: TH-35
Samco TH- 35 Ton, Model: TH-35, S/N: 91.2406, Voltage: 230, Cycles: 60, KVA: 3, Total Weight: 2160 Kg.
14" x 40" Yam, tool room engine lathe, 8" 3-jaw chuck, 2" bore, coolant
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Yam
14x40 Engine Lathe, Type: Tool Room, Distance Between Centers: 40", Spindle Bore Diameter: 2", Swing: 14", Gap: 10", Swing Minus Gap: 16", Chuck: 8" 3-Jaw, Coolant Pump, 220 volt 3-Phase.
19" x 72" Cincinnati Milacron #LR, engine lathe, 230 V., 3-phase
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Cincinnati Milacron
Model: LR
Product: 19 x 72 Lathe, Model Number: LR, Serial Number: 55024-73-16, Control AC Voltage: 115V, AC Voltage: 230 3 Phase, Control Diagram: 609482.
28" x 132" Tos #SU63A, 15" chk, 4-jaw, inch/metric, 16" Steady Rest, rapid traverse, coolant, 1966
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Tos
Model: SU63A
Year: 1966
TOS GEARED-HEAD PRECISION HEAVY DUTY ENGINE LATHE, MODE: SU63A, S/N: 0424094, NEW: 1966, CAPACITY: 28"X132", MAX RPM 1150, 16" ROLLER TYPE STEADY REST, TWO SPEED MOTOR 17.5/25.2 HP, 220 VOLT 3 PHASE, 15" CHUCK 4 JAW, 2" SOINDLE HOLE, INCH/METRIC THREADIND, 15" SWING OVER CROSS SLIDE, RAPID TRAVERSE, 4 WAY TOOL HOLDER ...more
Royal #GHE-1340, lathe engine, 3-jaw chuck, 3 HP, 240 V., 3-phase, coolant pump, foot brake, 1999
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Royal
Model: GHE-1340
Year: 1999
ROYAL-1340, MODEL: GHE-1340, S/N: 18709-059, YEAR:1999, 3 JAW CHUCK, FOOT BRAKE, EEMERGENCY STOP, COOLANT PUMP, HIGH GEAR: 460 1255 1750 2000 RPM, LOW GEAR: 70 115 190 300 RPM, METRIC AND STANDARD THREADS, FORWARD AND REVERSE THREADING, TURNING, VOLTS: 240, PHASE: 3, HP:3.
20" width x 18" D x 20" H Blue M #DC-3029, 650°F, 208-240 VAC, 10-12 Amps., 3-phase
Category: Environmental Chambers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Blue M
Model: DC-3029
BLUE M INDUSTRIAL OVEN, MODEL: DC-3029, MAX TEMP: 343 C / 650 F, INTERIOR DIM: 20" X 18"X 20" (LXDXH), 208-240 VAC, 10-12 AMPS, THREE PHASE, 60 HZ., LISTING ID#2552.
Blue M #CFR-7552C-2, environmental test chamber, R-12, single stage, 3°C to 93°C
Category: Environmental Chambers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Blue M
Model: CFR-7552C-2
Technical, Manufacturer: Blue M Electric, Model: CFR-7552C-2, Serial Number: CFR-179, Machine Type: Environmental Test Chamber, Interior Construction: High-grade stainless steel with viewing window, Refrigeration Type: Single Stage, Refrigerant: R-12 (2 lbs), Capacity & Performance, Temperature Range: 3C to 93C ...more
Royal Oak #R-O, form relief grinder, collets, 1969
Category: Form Grinders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Royal
Model: R-O
Year: 1969
ROYAL OAK FORM RELIEF GRPNDER, MODEL:R-O, S/N: PSR-02204, NEW: 1969, COLLETS, GOOD CONDITION, LISTING ID#2557.
Gap Frame Single Crank Press Machines
1 Result
150 Ton, Niagara #E-150, OBS press, 6" stroke, 20.5"Shut Height, 6" adj., 35 SPM, 50" x30"bed, 1980
Category: Gap Frame Single Crank Press Machines
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Niagara
Model: E-150
Year: 1980
MODEL E-150, CAPACITY 150 TON, BED SIZE 50"X 30", RAM SLIDE AREA 34" X 24", Y- SLOTTED BOLSTER 48" X 33" X 5" THICKNESS, BOLSTER 5", STROKE 6", MAX RATED CAPACITY.25 ABOVE BOTTOM STROKE, SPM 35, SHUT HEIGHT 20.5", MOTORIZED AIR RAM ADJUSTMENT 6", FLOOR TO TOP OF BOLSTER 41", HYDRAULIC OVERLOAD, OPERATOR CONTROL ...more
Wilson Tukon, hardness tester, S/N 923
Category: Hardness Testers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Wilson
WILSON TUKON HARDNESS TESTER, ODEL: MO, S/N: 923, GOOD CONDITION, LISTING ID#25516.
225 Ton, Pacific #J225-14, CNC hydraulic press brake, 14' overall, 149" between housing, 12" stroke, Autogauge 1000
Category: Hydraulic Press Brakes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Pacific
Model: J225-14
PACIFIC HYDRAULIC PRESS BRAKE, MODEL: J225-14, S/N: 8234, CAPACITY: 225 TON, 14' OVERALL, 12'5" BETWEEN COLUMNS, STROKE: 12", AUTOGAUGE 1000 CNC BACKGAUGE, VERY GOOD CONDITION.
15 Ton, Continental, hydraulic press, 18" x 40" bed, 5" stroke, 15 HP hydraulic system, 220/440 V.
Category: Hydraulic Presses
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Continental
CONTINENTAL HYDRAULIC PRESS, CAPACITY 15 TON SYROKE: 5", 15 HP HYDRAULIC SYSTEM, 220/440 VOLTS, BED: 18" X 40", (32" X 10" BETWEEN COLUMNS), LISTING ID#2553.
75 Ton, Neff #E-4, heavy duty 4-post hydraulic press, 20 HP Lincoln Electric AC motor, 1750 RPM, Fr. 256T, 3-phase
Category: Hydraulic Presses
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Neff
Model: E-4
Machine Type: Heavy-Duty 4-Post Hydraulic Press, Manufacturer: Neff Press (St. Louis, MO), Model Series: E-4, Structural Frame Rating: 75 Tons, Mechanical & Construction, Main Motor: 20 HP Lincoln Electric A.C. Motor, Motor : 1750 RPM | Frame 256T | Phase 3 | Service Factor 1.0, Frame Style: 4-Column design for ...more
Initial and Double Pinch Plate Bending Rolls
1 Result
13' x 3/4" Bertsch #14, initial pinch plate roll, 13.2" roll space, 16" roll diameter, air drop end, 1960
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Bertsch
Model: 14
Year: 1960
Used Bertsch #14 Initial Pinch Plate Roll, Model:14, S/N : M-8781, Year: 1960s, Stock Number: 18026, Top Roll Diameter: 16", Rated Capacity:13'X 3/4" Mild Steel / 4'X1-3/4" Mild Steel., Maximum Roll Space: 13.2", Initial Pinch Three Roll Arrangement, Air Drop End, Rear Roll Adjustment With Dial Indicator ...more
Bryant #1130, internal grinder, 36" sw, 16" cross, 30" face plate, 6500 RPM, 1980
Category: Internal Grinders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Bryant
Model: 1130
Year: 1980
BRYANT INTERNAL GRINDER, MODEL; 1130, S/N: V16112, NEW: 1980, 30" FACE PLATE, 36" MAX SWING, 3/8" TO 12" GRINDING STROKE, TRAVERSE STROKE 20", GRINDING SPINDLE 6500 RPM, WORK-HEAD ADJUSTMENT TO 15 Deg., GRINDS INCLUDED ANGLE TO 30 Deg., WORK SPINDLE RPM 20 TO 260, CROSS TRAVEL 16", FLOOR SPACE WITH COOLANT TANK 108" X ...more
Lab Freezers
1 Result
Scientemp Corp. #34-20B, chest freezer, 20 cu.ft., 32 to -29.2°F, R-404A refrigerant, 230 V., 1-phase, S/N S8001761
Category: Lab Freezers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Scientemp
Model: 34-20B
SCIENTEMP CO. FREEZER, MODEL: 34-20B, S/N: S8001761, TEMPERATURE RANGE: 0 TO -34 C (32 TO -29.2 F), CU. FT.: 20, REFRIGERANT: R-404A, VOLTAGE: 230 SINGLE PHASE, LISTING ID#2558.
Lappers Lapping Machines
1 Result
Basly, lapper
Category: Lappers Lapping Machines
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Basly
Besly Lapper Machine.
90 Ton, Wysong #90-6, mechanical press brake, 6.5' OA, 8' die rail, power ram adj., air clutch & brake, 1984, S/N PB 54-130
Category: Mechanical Press Brakes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Wysong
Model: 90-6
Year: 1984
WYSONG MECHANICAL PRESS BRAKE, MODEL:90-6, S/N: PB 54-130, NEW: 1984, 90 TONS, 6' 6" OVERALL, AIR CLUTCH AND AIR BRAKE, 2 SPEED(FAST APPROACH, SLOW PRESSING), POWER RAM ADJUST, DUAL PALM BUTTONS, ELECTRIC FOOT PEDAL, 8' DIE RAIL, EXCELLENT CONDITION.
120 Ton, HTC #10FM120, mechanical, 10' overall, front operated power back gauge, 6" stroke, 11.5" open height, 5.5" Shut Height, foot pedal
Category: Mechanical Press Brakes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Htc
Model: 10FM120
HTC MACHANICAL PRESS BRAKE, MODEL: 10FM120, S/N: 1177W743, 120 TONS X10 FT, FRONT OPERATED POWERD BACKGAUGE, 6" STROKE, OPEN HEIGHT: 11 1/2", SHUT HEIGHT: 5 1/2", FOOT PEDAL, 15 HP, 220/440 VOLTS THREE PHASE, WEIGHT: 23,100 LBS., LISTING ID#25539.
Mechanical Punch Presses
1 Result
110 Ton, E.width Bliss #C110, punch press, 6" stroke, 17" Shut Height, 4" adj., 35-70 SPM, 460 V., 3-phase
Category: Mechanical Punch Presses
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: E.w. Bliss
Model: C110
Technical, Manufacturer: E.W. Bliss, Model: C110, Serial Number: H66046, Tonnage Capacity: 110 Tons, Bolster Area: 42"x27", Slide Adjustment: 4", Mechanical Performance, Stroke Length: 6", Strokes Per Minute: 3570, Shut Height: 17", Maximum Press Air Pressure: 100 PSI, Power Requirements, Primary Voltage: 460V, Phase: ...more
15" Vermont #VP-15, precision comparator, 15" screen, 2-Axis readout, 10x lens, S/N VP-150037, 115 Volt
Category: Optical Comparators
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Vermont
Model: VP-15
VERMONT PRECISION COMPARATOR, MODEL:VP-15, S/N : VP 150037, 15" SCREEN, 115 VOLT, 2 AXIS READOUT, 10 X LENS, LISTING ID#25520.
Paint and Powder Accessories
1 Result
Reclaimer, for Nordson powder coating system, fully automatic seperator, new never used
Category: Paint and Powder Accessories
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Model: RECLAIMER
NEW NEVER USED: AZO. TYP E CYCLONE RECLAIMER FOR NORDSON POWDER COATING SYSTEM, FULLY AUTOMATIC SEPARATION OF AGGLOMERATES AND FOREIGN PARTICLES, COMPACT, SPACE SAVING CONSTRUCTION, VENT ASSIST, SIEVE AIR SEALS,.5 BALDOR INDUSTRAL MOTOR.
Paint and Powder Systems
1 Result
Hopper Canisters, powder coating system
Category: Paint and Powder Systems
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Model: HOPPER CANISTERS
HOPPER CANISTERS.
15000 lb. Regal, decoiler
Category: Pallet Decoilers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Regal
Machine Type: Heavy-Duty Motorized Stock UncoilerManufacturer: Regal Industries Corporation (Long Beach, CA)Model: 15000-30-SRP/HDSerial Number: 8731254Weight Capacity: 15,000 lbs MaxMaterial Width: 30" (nominal)Mechanical & Construction, Mandrel Style: 3-Segment expanding mandrel for secure coil I.D. gripping ...more
Plastic Rubber Mills
1 Result
6" x 14" Charles Ross & Son, 3-roll dispensing mill, 5 HP, 2 speed, explosion proof, 1983
Category: Plastic Rubber Mills
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Charles Ross
Year: 1983
CHARLES ROSS & SON, MODEL: 52C614, S/N: 42891, 3 ROLLS: 6"X14", ROLLS CAN BE HEATED OR COOLED, MOTOR: 5 HP, TWO SPEED, 240 VAC, THREE PHASE, YEAR:1983, EXPLOSION PROOF MOTOR, EXPLOSION PROOF HIGH/LOW - STOP SWITCH, EXCELLENT CONDITION, LISTING ID#25535.
Precision Roller Levelers
1 Result
4.5" x .393" Leveler / Straightener, 9 Over 10, variable speed, 3/4 HP motor, 220/440 V.
Category: Precision Roller Levelers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Leveler
LEVELER / STRAIGHTRNER 9 OVER 10, 9 OVER 10 CORRECTIVE ROLLS, ROLL DIAMETER.393", EVERY ROLL BACKED UP 2 PLACES, 4-1/2" MAX WIDTH, 3/4 HP MOTOR, 220/440 VOLT, ROLL LUBRICATING SYSTEM, ONLY LOWER ROLLS DRIVEN.
Press Type Spot Welders
2 Results
40 KVA Lors Machinery #140AP, spot press type welder
Category: Press Type Spot Welders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Lors
Model: 140AP
Key Technical :, Manufacturer: Lors Machinery Inc. (Kenilworth, N.J.), Model: 140AP, Serial Number: 478-2271, Power Rating: 40 KVA @ 50% Duty Cycle, Secondary Voltage: 2.3V Minimum to 5.5V Maximum, Frame Style: Vertical press-type with adjustable lower arm, s & Equipment:, Control System: Entron Resistance Welding ...more
75 KVA Sciaky #PMCR.1-STM-75-36-5, spot welder, 5" stroke, 36" throat, 780 VAC, 3 phase
Category: Press Type Spot Welders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Sciaky
Model: PMCR.1-STM-75-36-5
SCIAKY 75 KVA SPOT WELDER, MODEL: PMCR.1 STM-75-36-5, S/N: 11212, 75 KVA, 780 VAC, 3 PHASE, 36" THROAT, 5" STROKE, SCIAKY TOUCH-WELD CONTROL.
5' -11" Carlton #1A-11, 81" swing, #4MT, 5 HP, 60-1500 RPM, power clamping, box worktable
Category: Radial Drills
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Carlton
Model: 1A-11
CARLTON RADIAL DRILL, MODEL: 1A-11", COLUMN: 11", MAXIMUM SWING: 81", SPINDLE TAPER: MORSE #4, 5 HP, SPINDLE SPEEDS: 60-1500 RPM, POWER CLAMPING, BOX WORKTABLE, 220-440 VOLTS, WEIGHT 9,100 LBS., LISTING ID#25554.
Reciprocating Surface Grinders - Horizontal Spindle
3 Results
6" x 18" Chevalier #FSG-618M, manual surface grinder
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Chevalier
Model: FSG-618M
FSG-618 M Manual Surface Grinder, Model: FSG-618 M, S/N: A3829018, TABEL: 36" X 7 3/4", CHUCK: WALKER-HAGU BV MODEL 20, 17 3/4" X 6", X TRAVEL: 16", Y TRAVEL: 7", MAX WHEEL SIZE: 8".
6" x 18" Mitsui High-Tec #MSG-250H2AH, semi automatic surface grinder, Permanent Magnetic Chuck, 8" wheel, manual down feed, automatic cross feed & traverse
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Mitsui
Model: MSG-250H2AH
MITSUI HIGH-TEC SURFACE GRINDER, MODEL: MSG-250H2AH, S/N: 86033606, CAPACITY:6"X18", PERMANENT MAGNET CHUCK, SPINDLE CENTER TO TABLE CENTER MAX:19.5", AUTO CROSS FEED, AUTO TRAVERSE, MANUAL DOWN FEED, GRINDING WHEEL: 8" DIAMETER, SPINDLE MOTOR: 2 HP, RPM:3440 RPM, 240/480 VAC 3 PHASE, WEIGHT: 2,200 LBS., LISTING ...more
8" x 18" K.O. Lee #Leematic-2000, automatic surface grinder, 2850-3450 RPM,
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: K.o. Lee
Model: LEEMATIC-2000
Machine Type: Automatic Precision Surface GrinderModel: Leematic 2000 (S80B Series)Serial Number: 2048-ZF S80BCapacity and Travels, Maximum Grinding Surface: 8" x 18"Longitudinal Table Travel (X-Axis): 20"Cross Feed Travel (Z-Axis): 8"Vertical Capacity (Spindle Center to Table): 12"15"Performance, Spindle Speed: ...more
12 Stand, Custom #4800-12, rollformer, 1-1/4" arbor, MP300, 8" horizontal centers, 4" vertical centers,, pneumatic pinch rolls, 1999, S/N 991203
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: 4800-12
Year: 1999
CUSTOM ROLL FORM / FORMER, MODEL: 4800-12, S/N: 991203, NEW:1999, 12 STANDS, 1 1/4" ARBORS, MP300 CONTROL, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, VERIABLE TO 14 1/2" DIE SPACE, 7 1/2 HP MAIN DRIVE, 3 OVER DRIVEN STRAIGHTENER, PNEUMATIC PINCH ROLLS, LFV AIR ACTUATED FLYING CUT-OFF.
12 Stand, Custom #FS1-6412-18, rollformer, 1-1/4" arbor, MP300, 8" horiz centers, 4" vertical centers, pinch rolls entry & exit from straight, 1993
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: FS1-6412-18
Year: 1993
MODEL: FS1-6412-18, S/N:931703, NEW: 1993, 12 STANDS, MP 300 CONTROL SYSTEMS, 1 3/4" ARBORS, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, 705 HP DRIVE, 3 OVER 3 DRIVEN STRAIGHTENER, PINCH ROLLS ENTRY AND EXIT FROM STRAIGHTENER, LFV FLYING AIR CUT-OFF, LISTING ID#25538.
14 Stand, Lockformer #MP 300 Series, rollformer line, 12" roll space, 1.5" shaft, 4" vertical centers, 1999
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Lockformer
Model: MP-300-SERIES
Year: 1999
Lockformer 14 Stand Roll Form Line, S/N:UNK, Manufacturer: Lockformer, Year: 1999, Number of Stands: 14, Number of Passes: 10, Roll Space: 12", Shaft Size: 1.5", Verticall Centers: 4", Vertical Adjustment:.5", Horizontal Centers: 6", Tooling Profile: Roll up Garage Door, Gear Driven, Unist Lube System, Motor: 7.5 HP ...more
16 Stand, Bradbury & Tishken, 18 rafted rollform line, 1.5" shafts, 18" roll space, 4"-5.5" vertical, 1991
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Bradbury & Tishken
Year: 1991
BRADBURY RAFTED ROLLFORM LINE, S/N: 23891 NEW 1991, 16 STAND, SHAFTS 1.5", 18" ROLL SPACE, 4" TO 5.5" VERTICAL, GEAR BOX FOR EACH SET OF 8 STANDS, CHAIN DRIVE, 7.5 HP 220/440 VOLT, BRADBURY PALLET UNCOLIER 2500 LB, JOHNSON 16 TON PRE-PUNCH PRESS S/N 85003, BRADBURY 4 POST 15 TON CUT-OFF, STROKE 2" WITH DIE ...more
Rotary Table Surface Grinders - Horizontal Spindle
2 Results
Arter #A-1-12, horizontal spindle rotary surface grinder, 13" round chuck, 14" x 2" wheel, 7.5 HP
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Arter
Model: A-1-12
AETER HORIZONTAL SPINDLE ROTARY SURFACE GRINDER, MODEL A-1-12, S/N 1416, 13" ROUND CHUCK, MANUAL TILTING TO 10 DEGREES, 14" X 2" GRINDING WHEEL, 7.5 HP, 220/440 VOLTS 3 PHASE, WEIGHT 3,500 LBS.
Arter #A-1-12, horizontal rotary surface grinder, 13" round chuck, 14" x 2" grinder wheel, 7.5 HP
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Arter
Model: A-1-12
ARTER HORIZONTAL SPINDLE ROTARY SURFACE GRINDER, MODEL: A-1-12, S/N: 1216, 13" ROUND CHUCK, MANUAL TILTING TO 10 DEGREES, 14" X 2" GRINDER WHEEL, 7.5 HP, 220 VOLTS 3 PHASE, WEIHGHT 3,500 LBS.
Rotary Table Surface Grinders - Vertical Spindle
2 Results
Blanchard #22AD-42 Oerlikon, 42" chuck, 22" wheel, automatic cycle, coolant system, 50 HP, 1983
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Blanchard
Model: 22AD-42
Year: 1983
42" BLNCHARD OERLIKON ROTARY SURFACE GRINDER, MODEL: 22AD-42, S/N: 15555, NEW: 1983, CHUCK DIAMETER: 42", SWING INSIDE GUARDS: 48", VERTICAL RANGE UNDER NEW WHEEL: 24", MAXIMUM LODE ON CHECK: 3,000 LBS., GRINDING WHEEL DIAMETER: 22", GRINDING WHEEL SPEED: 720 RPM, CHUCK SPEEDS (VARIABLE): 6 TO 24 RPM, OERLIKON ...more
Mattison, rotary surface grinder
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Mattison
MATTISON ROTARY SURFACE GRINDER, 40" Chuck, 3/4" Chuck Life, Swing Around Dresser, Swing Inside Guards 42", Wet Base Coolant System, Segmented Wheel, 12" Max Clearance Under New Wheel, Faulk Fluid Coupling Isolates motor From Spindle, 50 HP 440V 3 Ph, Overall Size, Approximate: 78" LR x 132" FB x 112" H.
Screens and Sifters
1 Result
AZO #E-240-B1, cyclone sifter, mobile powder reclamation station, 230/460 V., 3-phase, multi-port pneumatic manifold
Category: Screens and Sifters
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Azo
Model: E-240-B1
Machine Type: Integrated Mobile Powder Sifting & Reclamation StationManufacturer: AZO GmbH (Germany) / AZO Inc. (Memphis, TN)Model Series: E-240-B1 CycloneScreener System Configuration: Multi-Port Pneumatic Distribution AccumulatorMechanical & Construction, Sifting Mechanism: Centrifugal cyclone action with ...more
RBS #HDT66X20, heat shrink tunnel, 66" W x 20" H capacity, 24 heat elements, chain driven, 2002
Category: Shrink Tunnels
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Rbs
Model: HDT66X20
Year: 2002
RBS HEAT SHRINK TUNNEL, S/N: 46-0002, MODEL:HDT 66 X 20, CAPACITY: 66" W X 20" H, HEAT TUNNEL EXPOSURE LENGHT: 72", 24 HEAT ELEMENTS, CHAIN DRIVEN ROLLLERS, APPROXIMATELY 50 SPARE ROLLERS (NEW), LESS CONTROLS, LOW-HIGH AIR FLOW ADJUSTMENT, 5 HP BLOWER MOTOR, LISTING ID#25533.
25" Cleereman #25C, heavy duty box column sliding head drill press, 5 HP, sound attenuated enclosure, 1964
Category: Single Spindle Drill Presses
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Cleereman
Model: 25C
Year: 1964
Technical, Manufacturer: Cleereman Machine Tool Corp. (Green Bay, Wis.), Model: 25" Sliding Head Drill, Serial Number: 25 C 1608, Machine Type: Box Column Sliding Head Drill Press, Date Manufactured: July 1964, Contract No.: NAS 8 10730, Capacity & Performance, Horsepower: 5 H.P., Rated Capacity: SAE 1035 Steel ...more
Straight Side Double Crank (Single Action) Press Machines
3 Results
75 Ton, Minster #P2-75, straight side double crank, 2" stroke, 15" Shut Height, 4" adj., 150-300 SPM, Wintriss Shadow 8 light curtains, air clutch
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Minster
Model: P2-75
Technical, Manufacturer: Minster Machine Company, Model: P2-75-42 Piece-Maker, Serial Number:P2-75-17286, Tonnage Capacity: 75 Tons, Bolster Area: 42" X 37", Slide Adjustment: 4", Mechanical Performance, Stroke Length: 2", Strokes Per Minute: 150-300, Shut Height: 15", Clutch Air Pressure: 60 PSI, Safety, Operator ...more
75 Ton, Minster #P2-75, straight side double crank, 3" stroke, 22.5" Shut Height, 4" adj., 150 SPM, Wintriss Shadow 8 light curtains
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Minster
Model: P2-75
Technical, Manufacturer: Minster Machine Company, Model: P2-75-42 Piece-Maker, Serial Number: P2-75-19741, Tonnage Capacity: 75 Tons, Bolster Area: 36" x 31", Slide Adjustment: 4", Mechanical Performance, Stroke Length: 3", Strokes Per Minute: 0150, Shut Height: 22.5", Clutch Air Pressure: 60 PSI, Safety, Operator ...more
75 Ton, Minster #P2-75-42, straight side double crank press, 2" stroke, 4" adj., 150-7000 SPM
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Minster
Model: P2-75-42
Minster P2-75-42 Straight Side Stamping Press, Press Type: P2-75, Bolster Size: 42 x 37, Serial Number: P2-75-17286, Strokes/Minute: 1507000, Tonnage: 75, Length of Stroke: 2", Side Adjustment: 4", Shut Height on Bed Stroke Down Adjustment: 4", Clutch Air Pressure : 60 pounds, Includes Light Curtain.
Haskel, hydro swage system, DSF-35 pump, 2004
Category: Swaging Machines (Swagers)
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Haskel
Year: 2004
Haskel Hydro Swage System, S/N: 57697, Year: 2004, Mark IV Power Supply 42769, Digital Indicator Strain Gauge 3370-S, Pump Dsf-35, Intensifier 422202, Mandrel Holder 42203.
Swiss Type and Lathe CNC Automatic Screw Machines
1 Result
Tsugami #NP-32C, Swiss lathe, 1.25" hole, 12' Mini Boss 325 bar feeder, 2 turrets, Fanuc LH1,2000
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Tsugami
Model: NP-32C
Year: 2000
TSUGAMI SWISS TYPE CNC TURNING CENTER, MODEL NP32C MACH111 LONG STROKE, S/N 9613, NEW 2000, FANUC LH1 CONTROL SPINDLE HOLE 32MM, 2 TURRETS, 7.5 HP, 12 FT MINI BOSS 325 BAR FEEDER, LISTING ID#25522.
Tank Mounted Air Compressors
1 Result
10 HP Speed Aire #52402, air compressor, 3-phase
Category: Tank Mounted Air Compressors
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Speed Aire
Model: 52402
Model: 52402, Stage: CCW or CCV, 3 Phase, 10 HP.
12000 lb. Tinius-Olsen, unvi. tester, tensile & compression, electro mechanical, 4' tension
Category: Tensile Testers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Tinius-Olsen
TINIUS OSEN UNIVERSAL TESTING MACHINE, CAPACITY: 12,000 LBS., TENSILE & COMPRESSION, ELECTRO MECHANICAL, ADMET MTEST QUATTRO PC BASED CONTROLLER, MAX PART LENGTH: 4'6" COMPRESSION, 4' TENSION, LISTING ID#25527.
60000 lb. Tinius-Olsen #Super-L, universal tensile / compression tester, S/N 158225
Category: Tensile Testers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Tinius-Olsen
Model: SUPER-L
TINIUS OLSEN UNIVERSAL TENSILE/COMPRESSION TESTER, MODEL: SUPER "L", S/N: 158225, CAPACITY: 60.000 LBS, 24" MAX DISTANCE, TINIUS OLSEN CONTROL, ID#25528.
Torque and Torsion Testers
1 Result
10000 lb. Riehle #EM-327, torsion tester, manually operated, S/N R-27465
Category: Torque and Torsion Testers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Riehle
Model: EM-327
RIEHLE TORSION TESTER, MODEL: EM 327, S/N: R-27465, CAPACITY: 10,000 IN. LBS., MANUALLY OPERATED, PENDULUM TYPE, VERNIER SCALE, SHIPPING WEIGHT 2,400 LBS, LISTING ID#25529.
Tube End Finishing and Forming Machines
1 Result
4" Torrington Vaill #511, rotary endformer, 460 V., 6-phase, 1973, S/N 511-94
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Torrington
Model: 511
Year: 1973
TORRINGTON VALL 511 ROTARY END FORMER, S/N:511-94, RANGE 1" TO 4" OD, FORM STROKE: 0 TO 1", FORM PRESSURE: 0 TO 15,000 LBS., FORM SPEED: ADJUSTABLE, CLAMP STROKE: 3", CLAMP PRESSURE: 0 TO 24,000 LBS., CLAMP SPEED: 6 IPS, ROTARY HEAD: 7 HP 1200 RPM MOTOR, HYDRAULIC POWER UNIT: 5HP 1800 RPM MOTOR, NEW: 1973, WORK CENTER ...more
2.5" Yoder #WH25, tube mill line, 10 stands, alpha flying cutoff, 8000 lb. double end coil reel
Category: Tube Mills
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Yoder
Model: WH25
Used Yoder WH25 Tube Mill Line, Model: WH25, S/N: UNK, Number of Stands: 10, Brackdown Stands: 4, Finishing Stands: 3, Sizing Stands: 3, Shaft Diameter: 2.5", Welder: High Frequency, 400kw (INDUCTOTHERM STYLE), Welder Metalizer Box, Dual Turks Head, Alpha Flying Cut-Off, Tallrand Length Control, Double-end Coil Reel: ...more
Universal Fatigue Testers
1 Result
Applied Test Systems #Series-2500, electromechanical creep tester, -20°F to 150°F
Category: Universal Fatigue Testers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Applied Test Systems
Model: SERIES-2500
Technical, Manufacturer: Applied Test Systems (ATS), Inc., Frame Series: Series 2500, Furnace/Oven Series: Series 2911, Serial Number: 3174/G/TT, Drive Type: Electromechanical (Precision Motor-Driven Ballscrew), Configuration: Vertical stack with multiple sample tiers for simultaneous testing, Construction: Heavy-duty ...more
Vertical Band Saws
4 Results
9" x 16" Bandsaw #Champ-V, band saw, 1" x .037" x 122" blade, 98-328 FPM
Category: Vertical Band Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Model: CHAMP-V
MODEL- CHAMP-V, S/N- 790152, CUTTING CAPACITY- 9", BLADE SIZE- 1" X 0.037" X 122" (129"), BLADE SPEED- 98 164 246 328 FPM/60Hz, 81 135 203 270 FPM/50Hz, VARIABLE SPEED- 50-230 FPM/60Hz, 42-196 FPM/50Hz.
10" x 10" Kasto #SSB260VA-CC, 162" L x 1.61" W x .05" T blade, chip conveyor, 1998
Category: Vertical Band Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Kasto
Model: SSB260VA-CC
Year: 1998
Technical, Manufacturer: KASTOModel: SSB 260 VA CCSerial Number: 6510 115 059Year: 1998Type: 6510, Series 115, ProgrammableCapacity: 10" x 10"Mechanical Performance, Saw Motor: 7.3 HPSaw Band Speed: Variable, 49410 ft/minSaw Band Size: 162" L x 1.61" W x 0.05" ThickFeed System: Automatic FeedClamping: Hydraulic ...more
13.2" x 13.2" DoAll #TF-1421H, vertical band saw, 1" x 171" blade, 480 V., 350 RPM, hydraulic vise
Category: Vertical Band Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Doall
Model: TF-1421H
DoAll Vertical Band Saw, Model:TF-1421H, Capacity, Round: 13-1/4", Work Table Height: 38", Tilt Frame 45 Degrees Right or Left Manual, Hydraulic Vice, Blade: 1" x 171", Blade Speed: 350 RPM, Volyage: 480.
DoAll #3613-2, vertical band saw, 220 V., 3-phase, 175" blade length
Category: Vertical Band Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Doall
Model: 3613-2
Model- 3613-2, S/N- 151-64269, Band length max- 175, File Length- 174, 3 Phase, 220V, Normal Amps- 5.9, Cycle- 60.
Vertical CNC Machining Centers
3 Results
Fadal #VMC15RT, CNC vertical machining center
Category: Vertical CNC Machining Centers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Fadal
Model: VMC-15RT
Model- 914, Phase- 3, Frequency- 60Hz, Full Load 40/20 Amp, Amperage 25/ 12.5, Short Circuit- 200KA, Diagram Number- 1002, Table length- 20" x 16".
Fadal #VMC4040HT, 20" X, 40" Y, 20" z, 10000 RPM, #40, 20 HP, 20" x 48" tbl., 1994
Category: Vertical CNC Machining Centers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Fadal
Model: VMC4040HT
Year: 1994
FADAL VNC 4020 HT, MODEL:906-I, SPINDLE HORSEPOWER: 20 HP, TABLE LENGHT 48", TABLE WIDTH: 20", MAX SPINDL (RPM) 7501-10000, YEAR: 1994, VOLTAGE: 220V, X- AXIS TRAVEL:20", Y-AXIS TRAVEL:40", Z-AXIS TRAVEL:20", SPINDLE: CAT 40, CONTROL: CNC, LISTING ID#25541.
Hardinge #VMC-600II, 20 automatic tool changer, 24" X, 20" Y, 20" Z, 8000 RPM, #40, 15 HP, Fanuc O-MD, 2000
Category: Vertical CNC Machining Centers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Hardinge
Model: VMC-600II
Year: 2000
HARDINGE VERTICAL MACHINING CENTER, MODLE:VMC600II, YEAR: 2000, FANUC O-MD CONTROL, 15 HP, RPM: 8,000, TABLE: 29.5"X 20", TRAVEL: 24"X 20"X 20" (X,Y,Z), CAT 40 SPINDLE, 4th AXIS PRE-WIRED, COOLANT SYSTEM, 220 VAC THREE PHASE, 9,700 LBS..
Vertical Double End Opposed Grinders
1 Result
Besly #905/12/303, vertical opposed disc grinder, 12" wheels, 5 HP, 480 V., 3-phase
Category: Vertical Double End Opposed Grinders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Besly
Model: 905/12/303
BESLY VERTICAL OPPOSED DISC GRINDER, MODEL: 905/12/303, 12 " GRINDING WHEELS, 5 HP PER SPINDLE, 16" TABLE 20" INCLUDING HOLDING FIXTURES, 480 VOLT 3 PHASE.
U.S. Baird #1, wire forming machine, 4-slide, 14 roll, mechanical clutch
Category: Wire Formers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: U.S. Baird
Model: -1
US BAIRD MODEL #1 FOURSLIDE WIRE FORMING MACHINE, S/N: 51-1628-111, SOFT STEEL WIRE CAPACITY 3/32", RIBBON CAPACITY 3/4, MAXIUM FEED LENGTH 7 1/4", 2 PLANE STRAIGHTENER, OVERHEAD FORMING ATTACHMENT, MACHANICAL CLUTCH, VARIDRIVE MOTOR & CONTROLS, 14 ROLL 2 PLANE STRAIGHTENER, 220 VOLTS 3 PHASE, DIMENSIONS: 4' X ...more
