Ex-Factory
Charlotte, NC 28270-1580
Gold Level Dealer
Surplus Record Dealer Since 2022
Contact
Sales Dept.
About
Ex-Factory is an importer and dealer of new & used woodworking, metalworking, glass and stone machinery. We also specialize in the sales of Complete Plants, running online auctions, liquidating complete equipment inventories and performing equipment appraisals.We started in 1989 in the woodworking equipment market in the US and Canada. Today we are the industry leader in buying and selling woodworking equipment in the US and Canada!
Products & Services
- Appraisers, Electrical & Power Equipment
- Auctioneers
- Boilers
- CNC Machinery
- Dryers
- Machining Centers, CNC
- Material Handling Equipment
- Plant Liquidations
- Pulverizers & Hammermills
- Recycling/Scrap/Waste Equipment
- Saws
- Woodworking Machinery
Associations & Affiliations
2422 listings in 202 categories
Air and Gas Scrubbers
1 Result
Barber-Colman Greene #70,000-ACFM, Portable Wet Scrubber, Dual Circuit Exhaust Fan Dust Collector System, Dual 100 HP Fan Drives, 70000 ACFM, Water injection
Category: Air and Gas Scrubbers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Barber-Colman
Model: 70,000 ACFM
BARBER-GREENE Portable Wet Scrubber: Complete with the following major components and s: -- High Capacity Dual Circuit Exhaust Fan Dust Collector System. -- Dual 100 HP Electric Fan Drives. -- 70,000 total ACFM. -- Mounted on T/A Drop Deck Trailer. -- Dual Blower/Fan intake Ducts. -- Emissions stack. -- Water ...more
Alligator Shears
2 Results
16" Mizar, hydraulic alligator shear, 2024
Category: Alligator Shears
Seller: Ex-Factory
Location: Charlotte, NC
Year: 2026
MIZAR- 16" SURPLUS Alligator Shear - IN STOCK -- Blade Length: 15,75 in (400 mm) -- Cutting Speed: 7 cuts/min. --TOTAL POWER 7.5 kW / 10 HP --OVERALL LENGTH 1.650 mm / 64.9" --OVERALL WIDTH 820 mm / 32.2" --OVERALL HEIGHT 1.600 mm / 63" --OVERALL WEIGHT 1.250 kg / 2,760 lb.
Ex-Factory has 1 more
listing in Alligator Shears.
Autoclaves
3 Results
48" x 132" Melco #CA411, composite autoclave, 350 psi, 650°F, Allen-Bradley Bradley CompactLogix PLC, 1978
Category: Autoclaves
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Melco
Year: 1978
MELCO 4 x 11 Composite AutoclaveHigh vacuum / High pressure system used in manufacturing laminated glass, aerospace composites, composite racing systems and ballistics armor. These systems are used by the glass industry world wide to bond and cure laminated glass for architectural, automotive, and ballistic ...more
Ex-Factory has 2 more
listings in Autoclaves.
Extrema #DCF-04, cartridge and bag filter, 14" inlet, 4 sections, 4 1-micron filter bags with 4-plastic collection bags, rings, clamps, legs, 2026, new
Category: Bag Filters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: DCF-04
Year: 2026
EXTREMA DCF-04 Bag Filter. -- s a 14" inlet; unit has (4) sections, (4) 1 micron filter bags with (4) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!.
Ex-Factory has 3 more
listings in Bag Filters.
NEW-MA #560, Automatic Hardware Vertical Bagger, 10 bags/minute, 4" or 11" bag width, Siemens SIMATIC S7-300 PLC & OP17 HMI, 2003
Category: Bagging Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: New-Ma
Model: 560
Year: 2003
NEW.MA 560 Vertical Bagger with Automatic Bag FillingLine consisting of:6x 450mm vibrator counting bowl with liner2x 650 mm vibrator counting bowl with liner4x 55 Liters automatic hoppers1x Manual station (handles & hinges)1x Multi head weighing machine for bulk nails or other small items counted by weight1x ...more
Ex-Factory has 1 more
listing in Bagging Equipment.
Bagging Equipment for Woodworking
10 Results
Express Scale #MCRS-180Elechyd, Bulk/Loose Material Bagger, 2 yd. hopper, 20' x 24" conveyor, 7.5 HP, 2026, new
Category: Bagging Equipment for Woodworking
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Express Scale
Model: MCRS-180ELECHYD
Year: 2026
MCRS is a Bagging System for mulch, compost, rock, or sand. This system is complete with a 2-yard product surge hopper, a 20' X 24" wide troughed incline product delivery conveyor with a cleated belt, an 8' bag closing conveyor, and a custom 7.5 HP Elec/hydraulic power unit. The system can fill bags by time ...more
Ex-Factory has 9 more
listings in Bagging Equipment for Woodworking.
18" wide x 12' long, Lewco #MDSB-18-144-60-40-40-B98-D08-G99-M26-A19, accumulation line bed belt conveyor, 230/460 volts, 60 FPM, 1.5 HP, 40" nominal belth height, adjustable 3-support legs, 2026, new
Category: Belt Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lewco
Year: 2026
LEWCO MDSB ACCUMULATION CONVEYOR18" Belt width, 144' long horizontal medium duty box bed belt conveyor; 1/2 HP TENV, Inverter motor, fixed speed of 60 FPM, 40" nominal belt height (+/- 3"), adjustable (3) support legs. -- Trackmate 120 EMB belt with Clipper lacing. Bottom, end drive, right hand side. -- Roll ...more
Ex-Factory has 5 more
listings in Belt Conveyors.
Conception #CRP-180, Short Block Feeder Infeed Conveyor, 4 m L x 1.2 m width, 200 mm x 7mm L belt conveyor, 2023
Category: Belt Feeder Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Conception
Model: CRP-180
Year: 2023
CONCEPTION CRP-180 Short Block Feeder Infeed Conveyor: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- ...more
Costa Levigatrici #WD7-CCCC-600, Steel Plate & Part Grinder, 23.6" max Finishing width, 6.3" max thickness capacity, (4) Grinding Heads, 20/30 HP Motors, 2017
Category: Belt Grinders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Costa
Model: WD7-CCCC-600
Year: 2017
COSTA LEVIGATRICI WD7-CCCC-600 Steel Plate & Part Grinder: -- Max. finishing width 23.64" -- Max. thickness of mild steel 6.3" -- Number of grinding heads (4) -- Motors (1 & 2) 30 HP -- Motors (2 and 3) 20 HP -- Machine weight 14,700 Lbs: -- Schneider Magelis control with display -- (4) Load meters -- Variable ...more
4-3/4" x 81 LASM #LS-2NSS, edge sander, 25" abrasive belt, 4" dust hood, 2026, new
Category: Belt Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Model: LS-2NSS
Year: 2026
LASM VOLPATO LS-2 NSS Feed Through Top and Bottom Molding Sander with Inverter Controlled BeltsMolding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual ...more
Ex-Factory has 66 more
listings in Belt Sanders.
Verville HOLDING-BIN, 6-Screw Holding Bin, 14-1/2" bottom screw, (1) 14-1/2" Exit Screw, MotorizedScrew, 11' L x 16 ' width x 18' H, 12' H Support Legs
Category: Bins
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Verville
VERVILLE 6-SCREW HOLDING BIN: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck.
Ex-Factory has 1 more
listing in Bins.
Webb #3-M-Btu, Biomass Burner, Refractory lined Burner Body & Heat Duct, Body Vortex Fans, Fuel feed Fan, Fuel Feeder, Burner Controls
Category: Biomass Burners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Webb
Model: 3 M BTU
WEBB 3 M BTU Biomass Burner;Complete with the following components and s: -- Refractory lined Burner Body. -- Refractory lined Heat Duct. -- Body Vortex Fans. -- Fuel feed Fan. -- Fuel Feeder. -- Burner Controls.NOTES: ● Refractory seems quite good and intact. ● Removal and loading is available.
Ex-Factory has 3 more
listings in Biomass Burners.
600 HP Barker 600-HP, Biomass-Fired Boiler, 24000 lb./hr. Steam Flow, Steam Pressure 1500 psi @ 600 deg F, 2011
Category: Biomass Steam Boilers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Barker
Model: 600 HP
Year: 2011
BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main s: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 ...more
Ex-Factory has 1 more
listing in Biomass Steam Boilers.
CSMI #Hi-Tech, Edger w/Optimizing, Two-saw Edger, Top reman Head & Syste, Infeed, Unscrambler, Scanning & Optimization
Category: Board / Wood Edgers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Csmi
Model: HI-TECH
CSMI Hi-Tech Optimized Board Edger. Complete with the following s: -- Two-saw Edger. --Top reman Head and System. --Infeed. --Unscrambler. --Scanning and Optimization. NOTE: Offered earlier at $75,000.
Ex-Factory has 1 more
listing in Board / Wood Edgers.
Baker #BDDO, deduster, 2002
Category: Board Dedusters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: BDDO
Year: 2002
BAKER BDDO Board Deduster: -- Conveyor Height: Min: 24", Max: 34" -- Feed Speed: Fully variable 0-700 feet (0 to 213.36 m) per minute -- Brushes: 3 Nylon brushes (replaceable) 0.040" diameter 8 strips per brush -- Height Adjustment: Hydraulic hand pump -- Dust Hook-up: 6" diameter recommended air flow dust pipe for ...more
Ex-Factory has 2 more
listings in Board Dedusters.
Boom Lifts
2 Results
500 lb. JLG #E400AJPN, boom lift, 40', 22'5" horizontal outreach, 2WD, automatic traction Control, 2006
Category: Boom Lifts
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jlg
Model: E400AJPN
Year: 2006
JLG E400AJPN Boom Lift: -- 40', 22' - 5" Horizontal Outreach, 21' - 6" up & over height -- 500 lb. unrestricted platform capacity -- Long-lasting batteries 8 x 6V, 370 A-h -- 48 Volts DC -- Automatic Traction Control -- 2WD -- Non-Continuous 360 Swing -- 144 Jib-Range of Articulation -- Narrow chassis ...more
Ex-Factory has 1 more
listing in Boom Lifts.
Booths, Paint and Powder
1 Result
Col-Met #144-120-144, Spray Booth, 144" L x 120" D x 144" H, (25) Filter Screens, (4) 12" x 48" 4-tube Light Panels, 1 HP - 120 V Exhaust Fan
Category: Booths, Paint and Powder
Seller: Ex-Factory
Location: Charlotte, NC
Model: 144-120-144
144L X 120"D X 144"H (25) Filter Screens (4) 12" X 48", (4) 4-tube light panels(1) Exhaust Fan 1HP 120V.
Zonato #FPZ500, CNC Bridge Saw, 3500 x 2000 mm table, 3700 mm X & Y, 500 mm Z, 1400 RPM, 21 HP, 2026, new
Category: Bridge Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: FPZ500
Year: 2026
ZONATO FPZ500 Bridge Saw Cutting Machine with NC ControlsBridge Saw Cutting Machine built with resistant welded steel. The machine can be supplied with 2 motorized axis or with 3 or 4 motorized axis (optional),programmable through PLC touch screen. The transverse movement of the bridge is carried out by means of rack ...more
Ex-Factory has 1 more
listing in Bridge Saws.
20 MM BTU Webster & Bennett #20-MBTU, Gas Burner, 10 HP blower, 3" gas train, Upright, 460 V Supply, 120 V Control, 2026, new
Category: Burners & Combustion Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Webster & Bennett
Model: 20-MBTU
Year: 2026
NEW WEBSTER 20 Million BTU Gas Burner.Complete with the following : -- 10 HP Blower motor. -- SIEMENS 3" Gas Train (Propane) -- Supply Voltage: 460V/60Hz. -- Control Voltage: 120V/60Hz/1. -- Control Transformer: 0.5 KVA. -- Flame Safeguard: Honeywell. -- Blower Motor: TEFC 460V/60Hz/60Hz/3.Configuration: ● ...more
Ex-Factory has 2 more
listings in Burners & Combustion Systems.
Cable/Wire Strippers
3 Results
Gensco #CSX-2010, Cable Stripper, 1/16"-4.5" diameter, 110 FPM, 230 Volts, 3PH
Category: Cable/Wire Strippers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gensco
Model: CSX 2010
GENSCO - CSX-2010: USED Cable StripperSingle phase: 230 Volts.Manufacturer's InfoThere are (2) stripping areas. 1. Main cutting head has upper & lower cutting blades. 2. Cutting head designed for smaller wires.SFully adjustable blade & feed roller assembly.Forward & reverse control.Automatic safety ...more
Ex-Factory has 2 more
listings in Cable/Wire Strippers.
Can Flatteners
3 Results
CP Manufacturing #CD1000, can crusher/blower, 1987
Category: Can Flatteners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cp Manufacturing
Model: CD1000
Year: 1987
CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP - 3/60/208/230/460 Volt Hydraulic Power Unit.
Ex-Factory has 2 more
listings in Can Flatteners.
Car Crushers
2 Results
EZ Car #A+, car crusher, 10" bopre cylinder, 78" travel, 4" rod shaft, 2011
Category: Car Crushers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ez
Model: A+
Year: 2011
EZ CAR - (Used) Model A: Car Crusher Stationary - ELECTRICApprox: 1,600 Hours.New in: 2011.System Pressure: 2,500 PSI.Port Reliefs set at: 2,650 PSI.Cylinders: 10" Bore.Travel: 78".Shaft: 4" Rod.OpeningSize: 20" x 8'-1" x 7'-7".OverallWeight: 61,000 Lbs.Length: 43'-1/4."Travel & operating height: ...more
Ex-Factory has 1 more
listing in Car Crushers.
Foley #367, Carbide Saw Grinder, .5 HP, 40" diameter, 120 V.
Category: Carbide Grinders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Foley
Model: 367
FOLEY - 367,.Saw Blade SharpenerDesigned expressly for carbide-tipped saw blade grinding, with 0.5 HP motor. -- Performs all (3) required operations: Face grinding, top grinding, and side grinding with speed efficiency. -- 4" - 40" Dia. saw blade cap., carriage travel: 5-1/2", cross-feed travel of 8-3/4". -- ...more
Carton Packaging Machines
1 Result
Nichols #300, Carton Layback Machine, 300 lb. capacity, 6' x 4' platform, 4" bore x 20" stroke cylinder
Category: Carton Packaging Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nichols
Model: 300
NICHOLS 300 Carton Layback Machine300 Lbs. max. weight cap. - Simple one-man operation to speed up sealing of large carton bottoms and reduce packaging cost. --Machine consists of roller conveyor base (5" off floor), pneumatically powered large, roughly 6' tall x 4' wide, layback platform with spring-loaded ...more
Cartridge Filters
2 Results
Extrema #DCF-05, cartridge and bag filter, 16" inlet, 5 1-micron filter bags with 5-plastic collection bags, rings, clamps, legs, 2026, new
Category: Cartridge Filters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: DCF-05
Year: 2026
EXTREMA DCF-05 Bag Filter. -- s a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!.
Ex-Factory has 1 more
listing in Cartridge Filters.
9" wide x 16' long, Math-Ex #CMS-16, Lateral-Chain Moulder Feeder, 4-1/2" thick, 600 FPM, 3 HP roller, 1-1/2 HP chain, 2026, new
Category: Chain Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Model: CMS-16
Year: 2026
MATH-EX CMS 16' LATERAL CHAIN FEED TABLE with the following:: -- Lateral chain feed table will feed material 1-1/2" wide min, up to 9" wide, maximum. The stock length is 12" to 16' and from 1/4" to 4-1/2" thick. -- Feed rate is variable from 50 to 600 FPM. The powered feed rollers are driven by a 3 HP ...more
Ex-Factory has 3 more
listings in Chain Conveyors.
Clamp - Case & Feed Thru
23 Results
Biesse #Cosmo, Semi-Automatic Case Clamp, 11.8"-51" working H, 11.8"-98" working L, 5.5"-27.5" depth, 13 FPM, 575 V., 60 Hz, 3-Ph., 2022
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: COSMO
Year: 2022
BIESSE - COSMO: Case Clamp (Semi-Automatic) -- Working Height: 11.8" - 51" (300 - 1300 mm); working length: 11.8" - 98" (300 - 2,500 mm); working depth: 5-1/2" - 27-1/2" (140 - 700 mm); 20" (500 mm) working height off floor.Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM (4 ...more
Ex-Factory has 22 more
listings in Clamp - Case & Feed Thru.
Clamp Carrier - Manual & Auto
6 Results
Quick #06-Section-Standard, Pneumatic Clamp Carrier, 6-section, 10-1/2' width capacity, (48) clamps, 50" opening, 2-1/2" H x 4-3/4" width jaw, 2026, new
Category: Clamp Carrier - Manual & Auto
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: 06-SECTION-STANDARD
Year: 2026
QUICK 6-SECTION, 10'-1/2' Wide Pneumatic "Standard" Clamp Carrier: 6-Section Clamp typically produces (48) high quality edge glued panels per day (3 panels per section x 6 sections x 8 hours). : -- (6) Sections with (8) clamps per section and 10-1/2' width capacity. -- (48) Clamps with 50" opening and ...more
Ex-Factory has 5 more
listings in Clamp Carrier - Manual & Auto.
Lacey-hammer #LD-2002, diode laser, 2026, new
Category: CNC Lasers
Seller: Ex-Factory
Location: Charlotte, NC
Model: LD-2002
Year: 2026
LACEY-HARMER LD-2002 Diode LaserEconomical self-contained Visable Diode Laser, optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- : 100 Millampere operating current, -20 to +40 C operating temperature, 90 V for 250 nano-sec surge protection. Beam ...more
Ex-Factory has 1 more
listing in CNC Lasers.
Breton #NC300-K26, CNC 4" Axis Work Center, 149" X, 90" Y, 11.8" Z, 147" x 88" bed, 20 HP, 12000 RPM, 26 ATC, 400 Volt, 3PH, 2010
Category: CNC Lathes and Turning Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Breton
Model: NC300-K26
Year: 2010
BRETON CONTOUBRETON NC300 K26 EVO CNC Stone Work Center.(2) Tables, each bed size of 147" x 88"(3740mm x 2240mm), X-axis travel 149" (3900mm), Y-axis travel 90" (2200mm), Z-axis travel @ 0 - 11.8" (300mm); 15 KW (20) HP electric motor, 0 - 12,000 RPM spindle ; variable speed to 9,000 RPM; each table is motorized to ...more
Ex-Factory has 2 more
listings in CNC Lathes and Turning Centers.
CNC Machine Controls
1 Result
TEM-TECH #TM-1418, CNC template maker, 3-axis, 4.6" X, 12" Y, 4" Z, 1 HP, 2026, new
Category: CNC Machine Controls
Seller: Ex-Factory
Location: Charlotte, NC
Model: TM-1418
Year: 2026
TEM-TECH TM-1418 CNC Template Maker;Precision 3-axis CNC Template making simplified with specifically designed software to scan a sample profile (or draw your own using 'Template Sketcher'), edit drawing, created CAD data file and run on CNC table-top router. -- Package includes: CNC Router; Hand-Held device ...more
44 Ton, U.S. Industrial #USHB44-6, CNC hydraulic press brake, 78.7: table length, 63.7" between housing, 0.8' throat, 1.96: stroke, 12.5" open height, 7.5 HP, 2-Axis CNC, 2026, new
Category: CNC Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Industrial
Model: USHB44-6
Year: 2026
US INDUSTRIAL USHB44-6 CNC Hydraulic Press Brake : -- Ram deflection adjustment -- Mechanical ram depth control -- Massive torsion bar for parallelism -- Forged heavy duty cylinder and cylinder body -- Three speed ram -- Rapid approach, bending cycle and rapid retreat -- Bottom time delay -- All steel construction -- ...more
Ex-Factory has 3 more
listings in CNC Press Brakes.
Cosmec #Conquest 515, CNC Router, 62" x 127" Fixed Table, 16.9" Z-Axis, 12 HP, 800-24000 RPM, 8-Position ATC, 2006
Category: CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cosmec
Model: CONQUEST 515
Year: 2006
HOLZ-HER CONQUEST 515- CNC Router(3,250mm X 1,50mm) with 62" X 127" fixed table, moving gantry design in a front-to-back configuration; 2-zone Phenolic vacuum table with pop-up pins for part location. -- : (1) 12 HP HSK 63 Type ATC spindle, 8-position front-mount tool carousel, variable spindle speed from 800 - 24,000 ...more
Ex-Factory has 5 more
listings in CNC Routers.
Cefla, Vacuum Coater, 12" width x 2" thickness, 144" max. length, 50 FPM, 4-head sanding machine, (2) 15 HP blowers, 8 UV lamps, 480 V., 2021
Category: Coating Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: VACUUM OCATER
Year: 2021
Vacuum Coating Line: Complete and Ready to Work!Equipment provides the best quantity/quality results; if parts (workpieces) are not suitable for processing, they are rejected prior to finishing.Parts are ly considered suitable for finishing if they are free of: Bow, warp, twist, marks, splits, and color ...more
Coil Handling - Miscellaneous
1 Result
AccuLoader, Bale Out Table, Loads 20'-40' Containers, 2002
Category: Coil Handling - Miscellaneous
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Acculoader
Model: ACCULOADER
Year: 2002
ACCULOADER: Container LoaderLoad 20 - 40 foot Containers in as little as: (10) Minutes with the AccuLoader™, instead of using a skip steer, which could take more than an hour.Designed for any size yard, this unique product for HMS 1 & 2 steel loads products: With max. weight capacity; comes with an ...more
Compact Track Loaders
2 Results
Caterpillar #289D3, Compact Loader w/Forestry Mulcher/Buckets/Trailer, 27.7 gallon Fuel Tank, 74.3 HP Engine, 1400 hours, 2021
Category: Compact Track Loaders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Caterpillar
Model: 289D3
Year: 2021
CATERPILLAR 289D3 Compact Loader w/ Forestry Mulcher / Grapple Bucket / Standard Bucket and Big Tex TrailerComplete Forestry complete with Big-Tex 25+5 Trailer. All equipment included!: -- Engine: Cat C3.3B DIT (turbo) 74.3 HP high flow -- Travel Speed - Forward or Reverse - Two Speed 8.3 mph - One Speed 4.5 mph -- ...more
Ex-Factory has 1 more
listing in Compact Track Loaders.
Complete Woodworking Plants
5 Results
West Salem Machinery #4-15-TPH, Pellet Mfg. Plant Equipment, 15 Tons/hr, 4-4-60S Hammer mill, 2010
Category: Complete Woodworking Plants
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: West Salem Machinery
Year: 2010
Wood Pellet Manufacturing Plant Equipment;Complete with the following s: -- Design capacity 15 tons per hour. -- (1) Pellet Mill (Pellet Press) – custom built in USA and was producing at a rate of 4½ tons per hour. Comes complete with spare parts. -- WEST SALEM Model 4-4-60S Hammer Mill. -- Bulk storage. ...more
Ex-Factory has 4 more
listings in Complete Woodworking Plants.
35" wide x 32' long, Dura-Quip #VC-3532, Vibrating Conveyor, 7" deep pan, 1/4" round holes punched plate, 10 HP
Category: Conveyors Vibratory Feeders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dura-Quip
Model: VC-3532
DURA-QUIP - VC-3532,.Vibrating Conveyor: -- :35" Wide x 32' Long; Pan is 7" deep and has 1/4" round holes punched plate in most of length to allow sawdust to drop outside of Conveyor. -- Bottom frame is filled with concrete 12" deep and rests on coil springs to isolate vibration from the ground. Buyer to replace ...more
Coordinate Measuring Machines (CMM)
1 Result
HMS #MEA, Quick-Set Stop System, 12" stops spaced, 2" x 4" aluminum extruded rail, (3) stacked 2" x 4" boards, 2026, new
Category: Coordinate Measuring Machines (CMM)
Seller: Ex-Factory
Location: Charlotte, NC
Model: MEA
Year: 2026
HMS MEA Quick-Set Measuring SystemChanges from any length to any length in seconds, up to 10' (up to 60' available), without changing the operator's position on the line. Highly accurate; designed for quick and easy setup; simple to use.s: -- Jig-honed steel stops spaced 12" apart, mounted to 2" x 4" ...more
Countertop and Postform Equipment
4 Results
Brandt PF-20/31, Feed Through - Single Sided Postformer, 122" Capacity, 90 deg & 180 deg wrapping capacity, pneumatic, 1989
Category: Countertop and Postform Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Brandt
Model: PF 20/31
Year: 1989
BRANDT PF 20/31 Postformer Single Sided 3,100 mm (122") Cap., 90 & 180 wrapping cap., coving attachment for backsplashes.: -- Pneumatically operated with automatic cycle, (9) pneumatic workpiece clamping cylinders. -- 5-7/8" Max. profile height on external 90 angle, temperature range 175 to 190 C. -- : (6) Pre-set ...more
Ex-Factory has 3 more
listings in Countertop and Postform Equipment.
171" x 80" Multitek #TRC-460-Rim-Crusher, Rim Crusher, 6" diameter Cylinder, 70000 lbs. crushing force, 25 HP
Category: Crushers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Multitek
Model: TRC-460-RIM-CRUSHER
MULTITEK - TRC 460,.Rim Crusher:.Less than (300) Hours!s & : Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control. The powerful MULTITEK built 6" (15.2 cm) diameter ...more
LHI #Super-RoboChop, pneumatic up-cut saw, 4-1/2" x 16" up to 6" x 9" cutting envelope, 15 HP, 16' infeed table, laser light, pneumatic stop, double palm buttons, manual chop, 2026, new
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: SUPER-ROBOCHOP
Year: 2026
LHI Super RoboChop Pneumatic Upcut Saw w/16' Infeed. Automatic custom Upcut Saw, cutting envelope of 4-1/2" x 16" up to 6" x 9"; cuts (2,000) 4" x 6" x 3-1/2" blocks/Hr: -- Up-cutting saw operation left-to-right or right-to-left (specify when ordering); saw structure tilted to assist in keeping boards on fence. -- ...more
Ex-Factory has 33 more
listings in Cutoff Saws.
horizontal machining center #V-206, HST rosser head debarker, Barn sweep, 36" diameter x 16' length
Category: Debarkers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hmc
Model: V-206
HMC V206 HST Rosser Head Debarker with Barn Sweep;HMC debarker for logs 6" to 36" dia. x 16' length(will pass 19') ). -- Debarking head Rosser (6) section 12" in dia. segmented driven with a 30 HP motor vee belt drive. -- Log turning: (6) sets of 25" wheels with shaft dia. 2-15/16" babbit bearing; (6) kicker ...more
Ex-Factory has 1 more
listing in Debarkers.
Dovetail Wood Joint Machines
10 Results
Cam-Wood #24-ATX, Multi Spindle Dovetail Machine, 24-Spindle, 10 HP - 7500 RPM, 9/16" thick x 9/16" width x 1-1/2" depth dovetail, 4" dust hood diameter, 2026, new
Category: Dovetail Wood Joint Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: 24-ATX
Year: 2026
CAM-WOOD 24-ATX Multi-Spindle Dovetailer24-Spindle Dovetailer can mill up to (24) Dovetails in one cycle.Capacity: -- 24" Width max., male and female dovetails with one automatic stroke for mass production. -- Dovetail Max Thickness: 9/16; - Dovetail Max Width: 9/16"; - Dovetail Max Depth: 1-1/2".s: -- Unique design ...more
Ex-Factory has 9 more
listings in Dovetail Wood Joint Machines.
Dowel Milling Machines
3 Results
Cam-Wood #TRS-805-H2X, Multiple Round Pole Maker, 8" width x 4.75" H Work capacity, 10"-unlimited Pole Length, 40 mm Arbor, 6200 RPM Spindles, 2026, new
Category: Dowel Milling Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TRS-805-H2X
Year: 2026
CAM-WOOD TRS-805-H2X Multiple Round Pole Makers: Single to Multiple Round Pole Making with Flutes all in one pass: -- Working Capacity (Maximum Working Size): 8"; Width, 4-¾";He right. -- Pole Making Length: Minimum10";, Maximum Unlimited. -- Spindle : Precision spindles are manufactured of SCM-4 tool steel ...more
Ex-Factory has 2 more
listings in Dowel Milling Machines.
30" x 60" x 48" Harmony #S60-XDRC, Vertical Baler, 20 HP, 25" x 60" Feed Opening, 7" Cylinder
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Harmony
Model: S60XDC
HARMONY - S60-XDRC: Vertical Baler: -- Motor: 20 HP. -- Bale Size: 30";x 60"; ≤ 48";. -- Bale Weight (OCC): Up to 1,000 Lbs. -- Feed Opening: 25″ x 60″. -- Ram Force: 92,360 Lbs. -- Volume: X-Large 7" cylinder. -- Loaded onto your Truck!.
Ex-Factory has 1 more
listing in Downstroke (Vertical) Balers.
Rader #30-ft., Truck Dumper, 30' Tipping Deck,
Category: Dumpers and Drum Dumpers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Rader
Model: 30 FT.
RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and s: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks ...more
Ex-Factory has 3 more
listings in Dumpers and Drum Dumpers.
Dust Collectors
104 Results
1230 cfm Donaldson Torit #WSO-20, Floor-Mounted Mist Collector, 20" Afterfilter height, 460 Volt, 3PH, 2012
Category: Dust Collectors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Torit
Model: WSO 20
Year: 2012
DONALDSON/TORIT - WSO 20: 1,230 CFM, 3 HP Floor Mounted Mist Collector with After-Filter -- Filter height: 20".Complete with: -- Top-Mounted after-filter.
Ex-Factory has 103 more
listings in Dust Collectors.
L & L #DA-80H, RF Edge Gluer, 64" x 124" x 4-1/2" capacity, 10 kw gen, 5 HP hydraulic, 2" bore, 4" stroke, 1999
Category: Edge Gluers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: L & L
Model: DA-80H
Year: 1999
L & L - DU ALL DA-80 H: High Frequency Press -- For assembly, clamping, and quick curing of edge banding & edge gluing; platen mounted at 30 angle; top lid opens 45. -- Capacity: 64" x 124"; Up to 4-1/2" thick; hydraulic edge & end pressure enable press to accommodate solid stock up to 4-1/2" thick. : -- ...more
Ex-Factory has 1 more
listing in Edge Gluers.
Cam-Wood #CS-18AAT-16/EM-300, End Matcher w/Optimizing Cutoff Saw, 12" width, 10.5" min. L, 300 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18AAT-16/EM-300
Year: 2026
CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking (Optional) connected to a CAM-WOOD 12" wide End Matcher; System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are also available. Call Jeff for price deduction. Data: -- Cut-Off Saw is arranged ...more
Ex-Factory has 11 more
listings in End Matchers.
8860 cfm, Carolina Blower #45-6, fan blower assembly, 10" SP fan, 19" inlet, 30 HP, 3/8" thick wheel blades, 1/4" thick housing, unitary base, V-belt drives, shaft and belt safety guards, 2026, new
Category: Fans
Seller: Ex-Factory
Location: Charlotte, NC
Year: 2026
CAROLINA BLOWER 45-6 Standard Duty Fan/Motor package assembled complete 30 HP motor. -- Rated at 8,860 CFM at 10" SP. Fan inlet diameter is 19". -- Fabricated with 3/8" thick wheel blades, 1/4" thick housing, primed and painted beige. 30 HP TEFC motor. Unitary base, V-belt drives, shaft, and belt safety guards. -- ...more
Ex-Factory has 1 more
listing in Fans.
Feller Bunchers - Track and Wheel
3 Results
Komatsu #XT460L-3, feller-buncher, FAE mulching head and hot saw, 300 HP @ 2000 RPM Cummins engine, 2017
Category: Feller Bunchers - Track and Wheel
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Komatsu
Model: XT460L-3
Year: 2017
KOMATSU - XT460L-3: Feller Buncher with FAE Mulching Head & Hot Saw -- Engine: CUMMINS 300 HP 224 kW @ 2,000 RPM. -- Fuel tank: (139) US Gallons. -- Max travel speed high: 3.3 MPH / 5.3 kMPH. -- Max travel speed low: 1.3 MPH / 2.1 kMPH. -- Hours: 9,000: -- Hot saw & FAE mulching head (mulching head: approx. ...more
Ex-Factory has 2 more
listings in Feller Bunchers - Track and Wheel.
Cefla #Aquadry-LA/6-TT10000, Drying Tunnel, (6) 1500 mm Sections, 59' total Oven length, 2.1-14 MPM, 0.75 kW, 2010
Category: Finishing Ovens
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: AQUADRY-LA/6-TT10000
Year: 2010
This Listing is for a Pair of drying tunnels that operate from (1) one control panel. Machine :Air blade style drying oven's with Side and top insulated panels made up of 6 sections of 1500 mm each -- Blower / fan, with external intake and recirculation duct-work --Heat Exchanger with automatic temperature ...more
Flooring Finishing Lines
1 Result
Ogden #TBD, Pur Laminating Line, for Engineered Flooring, 4'-8' L x 16" H Plywood Hopper Feeder, 55 gallon Drum Melter, 20-250 FPM Pur Roll-Coater, 20' Conveyor, 2021
Category: Flooring Finishing Lines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ogden
Model: TBD
Year: 2021
OGDEN PUR LAMINATING LINE for Engineered FlooringSystem consists of:POS 1. PLYWOOD HOPPER FEEDER Plywood boards (two-track or single-track) are loaded vertically into the hopper and push-fed from the hopper into the Roll Coater where the rolls from the Coater take over feeding the plywood. The plywood hopper feeder is ...more
Bandit Industries #Beast-4680, heavy duty horizontal grinder, 100 HP Cummins engine, radio remote Control, 2005
Category: Forestry Machinery
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bandit
Model: BEAST-4680
Year: 2005
BANDIT BEAST 4680 HORIZONTAL GRINDERThe Bandit 4680 Beast horizontal grinder is a high-production, heavy-duty machine designed for processing large volumes of wood and other organic materials. : -- Engine: Cummins 1000 HP -- Capacity: Trees and Logs up to 4' in diameter -- Cuttermill: 60" diameter with 48 teeth. ...more
Forestry Mulcher Attachments
5 Results
Fecon #FTX200, Mulching Tractor, 200 HP Engine, 24" Track width, 49" Reach w/Bullhog, 21" Ground Clearance, 80 GPM @ 5000 psi Circuit, 140 hours
Category: Forestry Mulcher Attachments
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Fecon
Model: FTX200
FECON FTX200 Mulching TractorThe D3 undercarriage in the FTX200 is designed for the toughest mulching applications, resulting in longer track life and less down time.: -- Engine: Cummins QSB4.5 200 HP (Tier 4 Stage V compliant) -- Track Width: 24"; -- Mulcher Circuit: 80 gpm @ 5000 psi -- Ground clearance: 21" -- Fuel ...more
Ex-Factory has 4 more
listings in Forestry Mulcher Attachments.
Forklifts
2 Results
3000 lb. Crown #RC3020-30, stand-up fork lift, 3-stage mast, 190" ma lift height, 89" clearance, 1995
Category: Forklifts
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Crown
Model: RC3020-30
Year: 1995
CROWN RC3020-30 Stand-Up Forklift: Load Capacity: 3,000 Lbs -- 3-stage mast -- Max. lift height 190" -- Clearance height: 89" lowered -- Battery drive train: 24V: -- Side shift -- cushion tires -- Overhead guard -- Power steering and SCR travel controllerNOTE: Order Picker is not running, Battery is charged, needs ...more
Ex-Factory has 1 more
listing in Forklifts.
2" 4 Industries #12-200, roll feed multi-blade rip saw, 12" W x 16" L, 200 FPM
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 12-200
4INDUSTRIES 12-200 Roll Feed Multiple Blade Rip Saw: -- 12" maximum width -- 1/2" to 2" thickness -- Minimum length 16" -- Feed speed up to 200 FPM with driven bottom feed rollers, non driven top roller -- Main saw motor 40 HP -- Feed motor 7.5 HP -- Saw blade 12" diameter.
Ex-Factory has 68 more
listings in Gang Rip Saws.
Glass Bending and Glass Laminating Equipment
11 Results
Baojun #BJ-268B, Laminating Kiln, 150°C, 126" x 67" Glass Capacity, 36 kW, 480 V., 2016
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baojun
Model: BJ-268B
Year: 2016
BAOJUN BJ-268B Glass Vacuum Heating / Laminating FurnaceThe (4) layer furnace uses vacuum bags for glass lamination using EVA, TPU, SGP films. The lamination process is based on the temperature cycle programming which depends on the glass thickness and type of laminating film used. The vacuum system achieves a total ...more
Ex-Factory has 10 more
listings in Glass Bending and Glass Laminating Equipment.
Glass Cutting Machines & Equipment
36 Results
Aculite #96X144AT, Class Break-out Table, 108" x 144" table, 108" x 144", 85 deg elevation, (2) 2.5" diameter cylinder, 5 HP air flotation, 2026, new
Category: Glass Cutting Machines & Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Aculite
Model: 96X144AT
Year: 2026
ACULITE 108" x 144" Tilting Air-Float Glass Break-Out TableHighly versatile hydraulic tilt-top cutting table for handling glass with a maximum sheet size of 102"; x 144". This table reduces glass handling time with a number of operational accessories and standard s including hydraulic actuated tilting mechanism, table ...more
Ex-Factory has 35 more
listings in Glass Cutting Machines & Equipment.
Glass Drilling Machines
7 Results
Bavelloni #VDM-1636, Vertical Drill & Milling Machining Center, 63" x 141" Glass size, 19 mm Glass thickness, 60 mm Drill diameter, 12000 RPM Spindle, 20 kW, 2018
Category: Glass Drilling Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bavelloni
Model: VDM 1636
Year: 2018
BAVELLONI VDM 1636 Vertical Drill & Milling Machining Center - 1600 x 3600 mm (63" x 141")A vertical CNC drilling/milling for automatic production on drilling and milling cycles: when the glass sheet is loaded on the entrance rack, the machine runs the work program by making the sheet go forward while the drilling ...more
Ex-Factory has 6 more
listings in Glass Drilling Machines.
Bavelloni B-73-CN, Straight Line Glass Beveler, 7-Spindle, 1.97" bevel width, 3- 45 deg bevel, 1/8 - 3/4" thick, 1.57" x 1.57" min. size, 0 - 4 m/min, 32" working H, 2003
Category: Glass Edging Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bavelloni
Model: B 73-CN
Year: 2003
BAVELLONI B-73-CN Glass Edge Beveling Machine(7) Spindle Vertical Straight Edging machine for the processing of beveled and pencil edge with cerium oxide polishing on the edge. Capable of providing beveled edges in one pass. The model CN can execute pencil edge on the glass thickness after the bevel with one diamond ...more
Ex-Factory has 48 more
listings in Glass Edging Machines.
Glass Equipment - Other and Misc.
5 Results
Benteler #PROCESSING LINE, automotive glass, 2003
Category: Glass Equipment - Other and Misc.
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Benteler
Model: PROCESSING
Year: 2003
BENTELER: Fully Automated CNC - Cut, Break, Grind (CBG) Line for Automotive & Appliance GlassFully Automatic Glass Processing Plant designed for: High production feeding; cutting; breaking; grinding edges; drilling; milling cutouts; washing. This Line is Product-Specific for the highly efficient & precise: ...more
Ex-Factory has 4 more
listings in Glass Equipment - Other and Misc..
Glass Handling Equipment
8 Results
Hegla PBS-6133, Glass Gantry Loading System, Automatic loading rotating frame, Tilting loading mobile table, A & L Storage racks, 2008
Category: Glass Handling Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hegla
Model: PBS 6133
Year: 2008
HEGLA - PBS 6133, Gantry Loading System / Portal ConveyorComplete automatic Gantry Crane Loading & Storage System": Automatic Conveyor Systems link the Glass Store (storage area) with the Cutting Shop. Whether the glass store consists of fixed frames, automatic compact stores, or a combination of the (2), the ...more
Ex-Factory has 7 more
listings in Glass Handling Equipment.
Glass Tempering Furnaces & Kilns
22 Results
Efco #EF-1540-R-L, Flat Tempering Furnace, 1500 mm x 4000 mm glass size, 4-19 mm glass thickness, 1995
Category: Glass Tempering Furnaces & Kilns
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Efco
Model: EF 1540 R-L
Year: 1995
EFCO EF 1540 R-L Flat Tempering Furnace 1500 x 4000 mmFully computerized control station is located alongside the load table. The control system is 'user friendly' utilizing simple clear instructions and on screen helps functions. The control system incorporates data logging facilities and fault finding ...more
Ex-Factory has 21 more
listings in Glass Tempering Furnaces & Kilns.
Glue & Dowel Insertion Machines
40 Results
Accu-Systems #DD, glue & dowel insertion gun
Category: Glue & Dowel Insertion Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Accu-Systems
Model: DD
ACCU-SYSTEMS - DD: Handheld Glue & Dowel Inserter -- Dowel diameter: 5 - 10 mm (0.20" - 0.39"); dowel length: 25 - 38 mm (0.98" - 1.50"). -- Currently setup for: 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L) Dowels.: -- Microprocessor-controlled glue & dowel gun (for repetitive cycles) with: Dowel reject slide; ...more
Ex-Factory has 39 more
listings in Glue & Dowel Insertion Machines.
Black Brothers 22-D-1175-80, Top & Bottom Glue Spreader, 80" width, 11-3/4" applicator diameter, 8-1/2" doctor diameter. 4-1/2" opening, 2 - 3 HP, 20 FPM, Nema-12 electric
Category: Glue Spreaders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Black Brothers
Model: 22-D-1175-80
BLACK BROTHERS 22-D-1175-80 Glue Spreader (TOP & BOTTOM): -- 80" Working width with 11-3/4" dia. Smooth EPDM coated rolls, 8-1/2" dia. EPDM coated doctor rolls. -- Upper elevator opening 0" - 4-1/2", 2 - 3 HP Variable speed drive, target feed speed of 20 FPM; Nema-12 electrics. -- Complete with: Push button ...more
Ex-Factory has 45 more
listings in Glue Spreaders.
Granulators
4 Results
15" x 24" Cumberland #1836, Granulator, 50 HP, (3) Fly Knives, (2) Bed Knives, 3/8" Screen
Category: Granulators
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cumberland
Model: 1524
CUMBERLAND - 1524,.Granulator: -- Motor: 50 HP Motor -- Opening Size: 15" x 24" -- Fly Knives: (3) -- Bed Knives: (2) -- Screen: 3/8" Loaded onto your Truck!.
Ex-Factory has 3 more
listings in Granulators.
Best #YM1000, material handler / grapple, 2026
Category: Grapples
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Best
Model: YM1000
Year: 2026
YM-1000 1.3 YARD 5 TINE Orange Peel Grapple: -- Operating Weight 3,100lbs -- Hydraulic rotation -- (5) Tines -- Semi-Closed type tine.
Ex-Factory has 1 more
listing in Grapples.
Hammermills for Wood Processing
3 Results
Schutte-Buffalo #WA16L, vertical hammermill
Category: Hammermills for Wood Processing
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte-Buffalo
Model: WA16L
SCHUTTE BUFFALO - Model WA16L,. HammermillModel# WA16L, 3500 RPM, with filtration system and multiple grates for destruction sizes. -- It also includes Electrical panel. -- This system is apart and palletized. All you have to do is pick it up and transport it to you. -- System was in perfect working order when it was ...more
Ex-Factory has 2 more
listings in Hammermills for Wood Processing.
Ponsse #Beaver, harvester, 204 HP engine, Tier 4F, 2011
Category: Harvesters
Seller: Ex-Factory
Location: Charlotte, NC
Model: BEAVER
Year: 2011
PONSSE - Beaver: Forestry Harvester -- Engine: Tier 4F; 204 HP - 150 K. -- Hours: 14,300.: -- Harvester head. -- Spacious and comfortable cabin. -- Hydraulic Crane.
Ex-Factory has 2 more
listings in Harvesters.
Naarva #K25, forestry hydraulic felling head
Category: Harvesting Heads
Seller: Ex-Factory
Location: Charlotte, NC
Model: K25
NAARVA K25 Forestry Hydraulic Felling HeadTrees and bushes that have been cut down can be lifted onto the bed of a truck directly, which makes harvesting safe and efficient in areas of restricted access. -- Weight: 661 Lbs. -- Height in felling position: 35.4" -- Grapple opening: 35.4". -- Cutting time: 1.8 Sec. -- ...more
Weinig #EM-13, hopper feeder, 1997
Category: Hoppers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weinig
Year: 1997
WEINIG EM-13 HOPPER Feeder for Through Feed moulders; Free-standing feeder base with intermediate table to moulder infeed. For moulders with short infeed table. For continuous feeding of equal workpieces into moulders.Working dimensions: -- Working width min./max. 35 - 125 mm. (1-3/8" - 4-15/16"), -- Material ...more
Horizontal & Vertical Glass Washers
18 Results
Benteller #WM-4523-13, Horizontal Washer, 2200 mm max width, 175 x 350 mm glass, 1.5-19 mm thickness, 13 m/min, 2006
Category: Horizontal & Vertical Glass Washers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Benteler
Model: WM 4523 132
Year: 2006
BENTELER WM 4523 132 Horizontal Glass Washing And Drying System 2200 mm (87") - Totally Refurbished 2022Automated Closed-Loop Horizontal Flat Glass Washing & Drying System. The system is designed for the most effective washing and drying of glass sheets with an emphasis on quality, efficient energy usage and ...more
Ex-Factory has 17 more
listings in Horizontal & Vertical Glass Washers.
American Baler #5042-10-30R, auto-tie horizontal baler, 10" cylinder, 30 HP, 50" x 24" charge open
Category: Horizontal Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: American
Model: 5042-10-30R
Year: 2001
AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal Baler: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".
Ex-Factory has 22 more
listings in Horizontal Balers.
Horizontal Band Saws
2 Results
12" Holytek #HP-11, horizontal band saw, 4270" mm x 25" mm x .89mm blade, 725mm blade, 55 FPM, 2015
Category: Horizontal Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: HP-11
Year: 2015
HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. : -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 to 7 -- Electroni display of ...more
Ex-Factory has 1 more
listing in Horizontal Band Saws.
Stemas #02FT1, hot stamping, double-support table, complete with pneumatic cylinders for piece clamping, 2026, new
Category: Hot Stamping Machines
Seller: Ex-Factory
Location: Charlotte, NC
Model: 02FT1
Year: 2026
STEMAS - 02FT1,.End FoilerSTEMAS designed a Foiler that works the ends of a moulding; a foiling Edgebander to finish the exposed ends of laminated mouldings.Machine Configuration: -- Machine Base is a heavy steel structure. -- Double-Support Table with guide and part reference for moulding alignment, complete with ...more
HVAC Manufacturing Equipment
2 Results
Twinflow Air Systems #TF575-073, Heated Air Make Up, 7000 cfm @ 1.75" ESP, 5 HP, 0.68 MBTUH, Maxon burner, 80 deg F, 0.3 psi, Natural gas, 2026, new
Category: HVAC Manufacturing Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Twinflow Air Systems
Model: TF575-073
Year: 2026
TWIN FLOW Air Make-Up Unit 7,000 CFM. Vertical mount with Remote Control Panel: -- CFM: 7,000 CFM @ 1.75" ESP, 5HP/575v/3ph/60Hz TEFC motor -- BTU: 0.68 MBTUH -- Burner: MAXON burner -- Temperature Control: 80º F temperature rise in spray cycle -- Mounting: Vertical, outdoor/indoor mounted -- Fuel required: ...more
Ex-Factory has 1 more
listing in HVAC Manufacturing Equipment.
100 Ton, Standard Industrial #AB100-12, hydraulic press brake, 12' overall, 125" between housing, 6" stroke, 6" throat, 13" open, 15 HP, 2026, new
Category: Hydraulic Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Standard
Model: AB100-12
Year: 2026
STANDARD INDUSTRIAL 12′ x 100 Ton AB100-12 Hydraulic Press BrakeManufactured in the USA including a 5 Year warranty!: -- Tonnage Forming/Punching: 100/66 -- Distance between housings: 10’-5"; -- Bed/Ram length: 12’ -- Below grade: No -- Top bed height: 35" -- Bed width: 4.5" -- Throat depth: 6" -- ...more
Ex-Factory has 6 more
listings in Hydraulic Press Brakes.
40 Ton, Comeva #PPX-3000, Hydraulic Cold Press, 118" X 49" working area, (2) 3.94" pistons, 3 HP, 400 V., 3PH, 2026
Category: Hydraulic Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Comeva
Model: PPX-3000
Year: 2026
COMEVA PPX-3000 Downstroke Hydraulic Laminating Cold Press: -- Number of working sections: (2). -- Working dimensions 3000 x 1250 mm, (118" x 49"). -- Maximum opening 1250 mm, (49"). -- Number of pistons 2 pcs dia. 100 mm. (3.94"). -- Hydraulic pump power 4 KW (3 HP). -- Number of rows of rollers on bottom platen. -- ...more
Ex-Factory has 1 more
listing in Hydraulic Presses.
Fanuc, 125I, Robortic Palletizing System, Control, 60" Stand, Vacuum Tool, Vacuum pump and Valve
Category: Industrial Robots
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Fanuc
Model: 125I
COMPLETE FANUC 125I ROBOTIC PALLETIZING SYSTEM System Includes the following: -- FANUC M-410IB/160 Palletizing Robot with Controller and Stand -- Robot will be tested -- End of Arm Tooling to Pick, Fork Style, Picking 94 Lbs Concrete Bags -- Master System Control Panel, 480 VAC 3PH & 24VDC Controls with HMI -- ...more
Ex-Factory has 9 more
listings in Industrial Robots.
Industrial Woodworking Upcut Saw
1 Result
PMI #PMI-24, semi-auto upcut miter saw, 24" x 1" bore blade, 10 HP, 2000 RPM, vert/horiz clamp, 2017
Category: Industrial Woodworking Upcut Saw
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Pmi
Model: PMI-24
Year: 2017
PMI PMI-24 Semi-Automatic Upcut Miter SawPrecision semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics) with a burr free mirror finish on cut parts. The upcut design, fully enclosed saw blade chamber, and powerful saw ...more
Insulated Glass Machines
41 Results
Bystronic #DR-LK, insulated glass line, 106.3" x196.85" galss capacity, 180° turning station, 2015
Category: Insulated Glass Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bystronic
Model: DR-LK
Year: 2015
2015 BYSTRONIC DR-LK 180 Turning Station for Insulated Glass Production LineThis offering is for the 180 Turning Station only. :Max glass size: 2700 x 5000 mmMin glass size: 190 x 350 mmGlass thickness range: 3 - 15 mmConveying speed: 15 - 48 m/minTime for 180 turn: ~20 sNOTE: Machine has low operating hours and is ...more
Ex-Factory has 40 more
listings in Insulated Glass Machines.
.25 Ton, Gorbel WC200, jib crane, 18' arm length, 200 degrees rotation, 2026, new
Category: Jib Cranes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gorbel
Year: 2026
GORBEL WC200 Column Mounted Jib Crane: -- Capacity 500 Lbs. -- Arm length 18'. -- Rotation approx 200 degrees. Includes hoist trolley. -- Mounting hardware not included.
Ex-Factory has 7 more
listings in Jib Cranes.
Custom #Conex-Box, Complete System Kiln, (2) individual containers, (2) 500 HP - 1272500 BTU/hr
Category: Kilns
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Custom
CUSTOM CONEX BOX KILN, COMPLETE SYSTEM -- :Custom "CONEX BOX", Propane fired; Convection Oven; Track Dry Kiln System with: Total of (2) individual Kiln Drying Containers.Each Container is "Stand-Alone" with its own individual Kiln Controls/Heating System & can be sold separately!Average dimensions of a typical ...more
Cam-wood TG-250SFJX, Knife grinder, 6" -10" diamater x 6" long cutters, (1) 6" diameter x 500 grit diamond grinding wheel, 2 HP, 2026, new
Category: Knife Grinders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD TG-250SFJ Knife Grinder for Finger Joint Knives Special design for grinding finger jointer knives.s: -- With linear guide bearings to ensure a smooth and accurate longitudinal traverse -- Grinding of HSS and carbide knives with large volume and variety possible -- High precision and durability. -- Heavy sheet ...more
Ex-Factory has 2 more
listings in Knife Grinders.
Mar-Bel #DLS-36, Laminate Slitter, 36" Throat capacity, 1987
Category: Laminate Slitters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mar-Bel
Model: DLS-36
Year: 1987
MAR-BEL DSL Laminate Slitter Single piece slitter that has a big throat capacity of 36".Designed to provide the owner with maximum throughput for accurate, smooth-edged laminate strips.Easily slits vertical or countertop grades without adjustment for the variation in material thickness.Fence with a sturdy double ...more
Ex-Factory has 4 more
listings in Laminate Slitters.
Unimak #FLL-1400-PUR, laminating line, 15 82 FPM, 10" -48" width, 1/8- 2-3/8" thinkness, 2026, new
Category: Laminating Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unimak
Model: FLL-1400-PUR
Year: 2026
UNIMAK FLL 1400 PUR Flat Lamination Line with Flying Knife System4' Laminating Line for laminating flat panels with PUR glue. Laminating Station is a sheet and roll feed system with calender style Double Roll Press.Technical Characteristics: -- Line Speed from 5 - 25 MPM (15 - 82 FPM). -- Panel Width from 250 mm - ...more
Ex-Factory has 20 more
listings in Laminating Machines.
Cam-Wood #BR-25+1X, Horizontal and Vertical Drill, 12" x 10" table, 2 HP - 3450 RPM, 2026, new
Category: Line Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-25+1X
Year: 2026
CAM-WOOD BR 25 + 1 Horizontal and Vertical Drills & : The model BR-25+ 1 has the same s as the BR-25, except it's fitted with an additionaluniversal boring head, making it ideal for drilling holes on K/D furniture. -- The boring head can be swiveled 360 degrees for angular drilling, as desired -- Vercical ...more
John Deere #1010E, forwarder, 2014
Category: Logging Machinery
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: John Deere
Model: 1010E
Year: 2014
JOHN DEERE 1010E 6-Wheeled Forwarder: -- Engine: 155 HP / 115.5 kW @1,900 RPM (Turbocharged). -- Load Space: 6 x 6. -- Booms: 27.9' / 8.5 m. -- Axles: Heavy-Duty. -- Type: Fixed Narrow. -- Wheels: Tracks. -- Blades: Stacking Blade. -- Hours: 12,699.: -- Rotating and Leveling Cab w/ AC. -- Rotating cabin. -- Air ...more
Louver & Shutter Equipment
8 Results
Cam-Wood #CM-200LGX, Louver Groover, 2" L slot, 1-3/16" depth, 4" between slot, 4" x 5-1/8" workpiece, 20 slots/min, 2026, new
Category: Louver & Shutter Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CM-200LGX
Year: 2026
CAM-WOOD CM-200LG LOUVER GROOVER Finally an automatic well well-priced Louver Groover: Very easy to set-up and start producing grooved rails. & s: -- A faster round louver groover mortise machine provides variable oscillating speed. Distance between the slot is controlled by the template. -- Two working tables ...more
Ex-Factory has 7 more
listings in Louver & Shutter Equipment.
Eberl #TC-12-VW, drying & steaming kiln, (6) drying containers, 2026, new
Category: Lumber Dry Kilns
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Eberl
Model: TC-12-VW
Year: 2026
New EBERL - Air Classic Type TC 12 VW,.Dry Kiln Systems.Total of (6) Drying Containers.Each Insulated Container is : Fans. Heater. Exhaust air fan. Inlet Air Flaps. Spraying Unit (with a ½"; connection). (2) Bulkhead Partition Retainers. Rubber Skirt. Control Unit with programs for steam treating and for drying ...more
Ex-Factory has 11 more
listings in Lumber Dry Kilns.
Material Handling Equipment
4 Results
Hydraulic Bin Tipper, for 96 or 64 gallon bins, 2 HP motor, casters
Category: Material Handling Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Hydraulic Bin Tipper: -- Accepts 96-Gallon & 64-Gallon bins.: -- 2 HP Motor. -- Casters.
Ex-Factory has 3 more
listings in Material Handling Equipment.
Material Handling for Woodworking
6 Results
Cefla #QEG, Panel Flipper, 600 V., 82 FPM, 5.9" W x 9.8" L Capacity
Category: Material Handling for Woodworking
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: QEG
CEFLA MODEL QEG 180 FLIPPER/TURN OVER UNIT With 90 Belt Transfers on Infeed/Outfeed of Flipper: -- :Combination "TRANSFERS" & 180 Pneumatic clamping "TURN OVER" unit; --Variable Speed from approx.16 - 82 FPM (5 - 25 MPM); Transfer unit Unit requires approx.7.4 HP (5.5 kW) motor. -- Total power requirements ...more
Ex-Factory has 5 more
listings in Material Handling for Woodworking.
Material Lifts - (Drum, Pallet, Vacuum)
26 Results
145 lb. Schmalz #JumboErgo-65, Vacuum Lift, 4.8 HP blower, 110 cfm, 14.7" Hg suction, 6.3" diameter Lift tube, 69.5" lift stroke, 2026, new
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schmalz
Model: JUMBOERGO-65
Year: 2026
SCHMALZ JUMBOERGO 65 Vacuum LiftVacuum lifting for panels in horizontal orientation to a near vertical position and reduce potential injury to employees. -- Lifting capacity 145 Lbs. non-porous materials without reduction in performance. -- Pneumatically-activated ventilation unit for easy release of load and toggle ...more
Ex-Factory has 25 more
listings in Material Lifts - (Drum, Pallet, Vacuum).
42' x 55' x 9' Custom-Built, Steel Mezzanine, 108" Deck height, 2.5" x 2.5" square steel tube uprights, 10.5' centers, 3/4" plywood decking, 1997
Category: Mezzanine Flooring
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Custom Built
Year: 1997
CUSTOM-BUILT 42' x 55' x 9' H Steel Mezzanine: -- Deck height 108";.: -- 2-1/2"; x 2-1/2"; Square steel tube uprights. -- 2"; W x 5"; H x 3/16"; Thick C-Beam outside deck frame. -- 3"; W x 1-1/2"; D x 1/32"; Thick Steel corrugated decking. -- Uprights on 10-1/2’ Centers. -- 2-3/4"; W x 4"; H x 3/16" ...more
U.S. Motors Coveyor #16, batch conveyor, 2013
Category: Miscellaneous Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Motors
Model: 16
Year: 2013
US CONVEYOR Technologies 16 YARD BATCH FEEDER -- New belt to be installed --New in 2013 -- 16 Yard -- 5 hp.
Ex-Factory has 1 more
listing in Miscellaneous Conveyors.
Miscellaneous Furnaces, Ovens and Parts
1 Result
Black Body #DV7/13, Vertical/Horizontal Oven, 2 Zone, 56 sq.ft. heating area, 4' x 7' each sec. of infrared panels
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Black Body
Model: BLACK BODY #DV7/13
Infra Red heating unit designed to be used over a conveyor (not included). Currently set up to roll a shop cart under to assist us in some finishing processes. This is a two-zone unit with an overall heating area of 56 sq ft. between the two infrared panels. Each section of infrared panels is 4'x7', allowing ...more
3.15" x 3" Cam-Wood #CS-1245, double miter saw, (2) 1.5 HP, 12" blade diameter, 4' infeed and outfeed roller tables, 4" diameter dust extraction port, 2026, new
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-1245
Year: 2026
CAM-WOOD CS-1245 Pneumatically Operated Double Miter Saw;Heavy Duty Double Miter Cutoff Saw with Foot Pedal actuation; 3.15" W x 3" H max. cut cap.s: -- Precise setting on 45 each. -- "Incremental leaf" blade guard keeps hands clear of the cutting area. -- Pressing the foot pedal activates the guard/clamp while ...more
Ex-Factory has 40 more
listings in Miter Saws.
Mobile Balers
3 Results
Al Jon #580CL, Car Logger Baler w/ Boom, 19-1/4' x 10' x 3.6' open chamber, 17-20+ metric tons/hour, Cummins diesel engine, 2017
Category: Mobile Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Al Jon
Model: 580CL
Year: 2017
ALJON - 580CL: Car Logger Baler with BoomNEW IN 2017 - (6,500) Hours!10' x 19' Chamber & "L-Box" design; swallows' vehicles as large as full-size Vans with ease. -- Open Chamber: 19-1/4' x 10.1' x 3.6'. -- Bale size: 40" x 25" x Variable. -- Production: (20 - 25) Per hour. -- Scrap metal ...more
Ex-Factory has 2 more
listings in Mobile Balers.
Genesis Systems Group #400, mobile shear, 2010
Category: Mobile Shears
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Genesis
Model: 400
Year: 2010
VOLVO - EC210CL: Model 400 Genesis Shear ● New in 2010. ● Approx (15,000) Hours. ● Operating weight: 45,149 - 52,941 Lbs.Model: "400" Shear ● Weight: 8,800 Lbs. ● Opening: 28". ● Depth: 29". ● Reach: 8' 0". ● Weight boom mount: 45,000. ● Weight stick mount: 75,000.
1-3/4" x 24" x 10" Baker #Version-I, Banding Notch Groover, 7/8" width x 3/8" deep notches, (3) 14" diameter circular blades, 2026, new
Category: Notching Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: VERSION-I
Year: 2026
BAKER VERSION I Banding Notch GrooverCut "military" or strapping notches in lumber to use as protective binding strips when using banding on palletized materials. Accepts any length boards (24" minimum), from 2-1/2" - 10" wide, and 1-1/4" - 1-3/4" thick. (2) Dado cutters make 7/8" w x 3/8" deep notches, and (3) 14" ...more
Ex-Factory has 10 more
listings in Notching Machines.
Oil/Water Separators
1 Result
19 Gallons, Kaeser #KCF-400, oil/water seperator, 2015
Category: Oil/Water Separators
Seller: Ex-Factory
Location: Charlotte, NC
Model: KCF-400
Year: 2015
KAESER KCF 200 Oil/Water Separator: -- Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. -- Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. -- Filling volume 19.2 Gallons. -- ...more
Optimizing Cross-Cut Saws
8 Results
Grecon / Dimter #Opticut-204L, optimizing cutoff system, 1989
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Grecon
Model: OPTICUT-204L
Year: 1999
GRECON/DIMTER OPTICUT 204 L Optimizing Cutoff System: -- For hard or soft wood. -- Left-to-right feed. -- Max. crosscut section 7-3/4" x 1-15/16" to 5-3/4" x 3-1/16". -- Board width cap. 1-1/5" to 7-3/4", Board thickness 3/8" - 3-1/8", Board length 15" to 20'. -- Shortest fixed length 5-3/8", Shortest finger ...more
Ex-Factory has 7 more
listings in Optimizing Cross-Cut Saws.
Onsrud #W-147-BE, Radial Arm Routers, 4' x 8' format, 5 HP, 14700 RPM, 4' x 14' table
Category: Overarm Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: W-147-BE
Year: 1974
ONSRUD W-147-BE RADIAL ARM ROUTERThis Radial Arm Routers gives you the option of pattern routing operating in a 4' x 8' format. -- Great for all types of pattern routing. 5 HP Boosted to 14,700 RPM by a Brooks Frequency changer. -- All special clampsincluded. -- Router comes with a 4' x 14' Table for ...more
Overhead-Bridge Cranes
1 Result
.5 Ton, Gorbel GLCS-1000-20-30, ceiling mounted bridge crane w/ Yale hoist, 30' runway, (6) hanger assemblies, 2026, new
Category: Overhead-Bridge Cranes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gorbel
Year: 2026
GORBEL GLCS 1000-20-30 1/2 Ton Bridge Crane System w/ HARRINGTON EQ HoistGorbel ceiling supported bridge crane system with the following: -- 30’+/- Runways and (1) 1/2 Ton steel bridge girder at 20’ +/- OAL -- (6) Hanger Assemblies -- Festooning and Festoon Trolley -- Hoist Trolley -- End Trucks.Includes: ...more
Paddle Mixers and Blenders
1 Result
76 cu.ft. Marion #HPS-42120, paddle mixer, 10' x 42" capacity, 50 HP Baldor motor, 1760 RPM
Category: Paddle Mixers and Blenders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marion
MARION HPS-42120 Stainless Steel Paddle Mixer: -- 76 cu. Ft. Paddle mixer stainless --10ft x 42-inch -- Main motor: 50 HP Baldor (1760 RPM) -- Speed Reducer max.: 65 RPM: -- Dodge speed reducer: Ratio 24.62, size: TXT825T (part #: 248280-GC-S).
Paint and Powder Systems
5 Results
4-Gun Cefla #Kleenspray-12, Flatline Spray System, 51" W x 76" L Spray Enclosure, 480 V., 2011
Category: Paint and Powder Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: 4-GUN CEFLA #KLEENSPRAY-12
Year: 2011
CEFLA KLEENSPRAY 12 Reciprocating Spray Line;Line Includes. -- VENJACOB Oven following the KLEENSPRAY. 600V/3/50-60 Hz. 230Vac/24Vdc. Control Voltage Max capacity 25 KW. Nominal Load 40 Amps.Year of Construction 2001. S/N 20104593 -- BURKLE UV Curing oven following the oven. Type TRUV2. (2) UV Lamp. Electrical ...more
Ex-Factory has 4 more
listings in Paint and Powder Systems.
Pallet Nailers and Pallet Equipment
16 Results
Baker #ABX, single head band resaw, 95 FPM, 2026, new
Category: Pallet Nailers and Pallet Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: ABX
Year: 2026
BAKER ABX Band Resaw (Single Head)The Baker ABX Band Resaw is designed to save space but give you the same great s of larger band resaws. The ABX a heavy duty frame design which allows the headrig to be adjusted up or down and the conveyor will stay at a fixed height. Because the conveyor belt stays at a fixed height ...more
Ex-Factory has 15 more
listings in Pallet Nailers and Pallet Equipment.
Phoenix #PHP-2100, Auto Stretch Wrapping Machine, 35 loads/hr, 4000 lb. turntable capacity, 50" L x 50" width x 80" H, 80" max H, 12 RPM
Category: Pallet Wrappers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Phoenix
Model: PHP-2100
Year: 2017
PHOENIX PCTA 2100 Automatic Pallet Wrapper Production rate: 35 Loads per hour: -- Turntable cap.: 4,000 Lbs. -- Standard max. load size: 50" L x 50" W x 80" H. -- Standard max. height: 80". -- Variable turntable speed: 12 RPM Variable speed. -- Powered pre-stretch: 245%. -- Film force control: Adjustable electronic. ...more
Ex-Factory has 3 more
listings in Pallet Wrappers.
Cam-Wood #RS-DW2400X, Overhead Rail Saw w/Bevel Cutting, 8' L x 5-1/8" cutting thickness, 1" spindle diameter, 2.5 HP, 2026, new
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-DW2400X
Year: 2026
CAM-WOOD RS-DW2400X 8' Overhead Rail Saw w/ Bevel Cuttings: -- Programmable cutting cycle for higher production output -- 45 to 90 degrees tilting angle cutting. -- Variable Cutting Speed by Inverter. -- Rail is treated hardened, precision ground for maximum wear resistance and slide accuracy. -- Saw head runs on ...more
Ex-Factory has 48 more
listings in Panel Saws.
Paper and Corrugated Materials Balers
2 Results
Marathon #RJ-225, Stationary Compactor, 2-Yard, 55100 lb. compaction force, 56 sec. cycle time, 10 HP
Category: Paper and Corrugated Materials Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marathon
Model: RJ-225
MARATHON - RJ-225: Stationary Compactor - 2-Yard -- 10 HP. -- Working condition. --The RJ-225 is the best compactor value. Built for reliable performance in commercial and medium-industrial situations, it effectively reduces solid-waste material to a fraction of its original size. It is attractively priced and s a ...more
Ex-Factory has 1 more
listing in Paper and Corrugated Materials Balers.
Allegheny Bradford #20-350C, document shredder, 40 HP, 20" feed open, 2000
Category: Paper Shredders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Allegheny Bradford
Model: 20-350C
Year: 2000
ALLEGHENY 20-350C DOCUMENT SHREDDER: -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 Lbs.
Paper Slitters and Rewinders
2 Results
Unimak SM-1500-F, paper slitter and rewinder, 59" wide x 23-5/8" diameter, 16 mils foil thickness, 246 FPM, 15-sets knives and knife holders, penumatic air shaft rewind, 2-winding shatfs, security s**
Category: Paper Slitters and Rewinders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unimak
Year: 2026
UNIMAK SM 1500-F Rewind Slitter with Rotary KnivesUNIMAK offers a well built machine with air shafts and rotary knives for slitting heavier products up to 16 mils thick.Technical : -- Working Width 1500 mm ( 59"). --Max. Roll Diam. 600 mm ( 23-5/8"). -- Max. Foil. Thickness 0.40 mm (16 mils). -- Slitting Speed Max. 75 ...more
Ex-Factory has 1 more
listing in Paper Slitters and Rewinders.
Pellet Mills and Briquetting Machines
10 Results
Nova Pellet #N-Eco-45KW, Pellet Mill, 1200 lb/hr, 60 HP, 0.31" pellet diameter, 15" die, 2" die I.D., 7.2" roller O.D., 2026, new
Category: Pellet Mills and Briquetting Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nova Pellet
Model: N-ECO-45KW
Year: 2026
NOVA PELLET - N-Eco - 45 kW,.Pellet Mill Low specific energy consumption per ton of pellet.: -- Capacity: 770 - 1,200 Lbs/Hr (350 - 550 kG/Hr) depending on the raw material. -- Main drive: 60 HP (45 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings: 0.02" ...more
Ex-Factory has 9 more
listings in Pellet Mills and Briquetting Machines.
56" Black Brothers RPP-875-56, Pinch Roller, 8-3/4 diameter Rolls, 4-1/2" upper elevator opening, 1.5 HP, 8" diameter cylinders
Category: Pinch Roller
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Black Brothers
Model: RPP 875-56
BLACK BROTHERS RPP 875-56 Rolling Press56" Working width, 8-3/4" dia. rolls (60/65 durometer). -- Upper elevator opening 0" - 4-1/2" with opening indicator. -- 1.5 HP (30 FPM) Fixed speed motor drive. -- 8" Dia. cylinders, 8,000 lbs. max. combined pressure. -- 3-1/3" Dia. web path idler roll. -- Top only spring loaded ...more
Ex-Factory has 2 more
listings in Pinch Roller.
Plastic Granulators and Pelletizer Machines
5 Results
AEC #GP1018, granulator, 10 HP, 10" x18" feed, pivoting hopper, 2016
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Aec
Model: GP1018
Year: 2016
AEC - GP1018,.Granulator: --Mfg: 2016 --10 HP --Feed: 10" x 18" --Pivoting Hopper --Drop Down Removable Screen Cradle --3 Knife Open Rotor --5/16"; Screen --Rotating End Discs / 10"; Cutting Circle --50"; Feed Height --Max Throughput: 550 lbs./Hr. --Weight: 1500 lbs. --Approx. Dims: L: 50"; x W: 45"; x H: 59"; ...more
Ex-Factory has 4 more
listings in Plastic Granulators and Pelletizer Machines.
Polishers (Including Buffing Jacks)
2 Results
Comandulli #Omega-00-DX-8+4, Multi-Head Line Polisher, 3.4" thickness, 7.87" min width, 23.62" width x 21' L conveyor, 2013
Category: Polishers (Including Buffing Jacks)
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Comandulli
Model: OMEGA 100 DX 8+4
Year: 2013
COMANDULLI OMEGA 100 DX 8+4 Multi-Spindle Automatic Edge Polishing Machine, with 3,830 Hrs. Refurbished from factory 2022!Main operating bar and motors completely refurbished by COMANDULLI in 2022. $18,000 invested in refurbishment in preparation to sell. Machine only used less than 5 hours since refurbishment. No ...more
Ex-Factory has 1 more
listing in Polishers (Including Buffing Jacks).
Schneeberger #9-Sculptor, proflie grinder, 1-1/2" spindle arbor, 1500-3000 RPM, dresser, 1984
Category: Profile Grinders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schneeberger
Model: 9-SCULPTOR
Year: 1984
Schneeberger 9 Sculptor Profile GrinderSwiss Made, Schneeberger Automated High Precision Grinder for Finger Joint, router bits, saw blades, straight and milling Cutters. : -- Grinding Motor: 1,500 - 3,000 RPM. -- Cooling Pump: 2,800 RPM. -- Grinding Wheel Speed: 3,000 - 6,000 RPM. -- Grinding Wheel Diameter: 50 - 200 ...more
Ex-Factory has 9 more
listings in Profile Grinders.
Cam-Wood #RS-612X, Radial Arm Saw, 2 HP, 3-1/8" cut depth, 10-12" diameter blade, 27" trimming width x 16-1/2" crosscut, 1" diameter spindle, 25-1/2" x 31-1/2" table, 2026, new
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-612X
Year: 2026
CAM-WOOD RS-612X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 2 HP Single-phase motor; 3-1/8" cutting depth with 10-12" dia. blade; 27" max. trimming width x 16-1/2" max. crosscut; 1" dia. spindle. : -- Magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head ...more
Ex-Factory has 17 more
listings in Radial Arm Saws.
Reciprocating Type Air Compressors
1 Result
51.8 cfm, 175 psi, Devair #447, Piston Air Compressor, 15 HP, 2-Stage, 120-gallon horizontal air receiver, 200 V., 3PH, 1998
Category: Reciprocating Type Air Compressors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Devair
Model: 447
Year: 1998
DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Reciprocating Air Compressor: -- Cap. 51.8 CFM, Max. pressure 175 PSI.Complete with: -- 120 Gallon Cap. 24"; Dia. x 60"; L Horizontal Air Receiving Tank.
Recycling Equipment
2 Results
Can Densifier, Dens-A-Can #DAC-1200, 20 HP motor
Category: Recycling Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dens-A-Can
Model: DAC-1200
DAC-1200 - DENSACAN: Can DensifierThe "DAC-1200" is fully automatic and will run continuously as long as cans are fed.s -- Automatic shut off when empty. -- Capacity in pounds/hour. ● Aluminum: 1,200 Lbs. ● Aluminum: Flat 2,000 Lbs; Ferrous: 2,500 Lbs. -- Biscuit ; typical size: 11" x 13" x 9". -- Motor: 20 ...more
Ex-Factory has 1 more
listing in Recycling Equipment.
Refrigerated Compressed Air Dryers
1 Result
85 cfm, 140°F, 203 psi, Ingersoll-Rand #D144IN, refrigerated air dryer, R-134A, variable speed fan, 2007
Category: Refrigerated Compressed Air Dryers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ingersoll-Rand
Model: D144IN
Year: 2007
INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer: -- Cap. 85 CFM. -- Max. working pressure 203 PSI. -- Max. inlet temperature 60 C (140 F). -- Refrigerant type R-134A.: -- Aluminum braze plate heat exchanger. -- Variable speed fan. -- Microprocessor control, with Graphic display, LED Dew ...more
Baker #A, Band Resaw, 6" cut H x unlimited L, 7" x 7" material, 120 FPM, 28" wheel diameter, 13'-2" L x 1" or 1-1/4" width x 0.035" blade, 20 HP, 2026, new
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: A
Year: 2026
BAKER A Band Resaw 1/4" to 6" (6 mm-152 mm) cutting height x unlimited lengths; accepts up to 7" x 7" max. incoming material with conveyor set at zero degrees.: -- Fully variable feed speeds from 0 to 120 FPM and controlled by a hydraulic flow control valve; feed speeds relative to width of cut and hardness of ...more
Ex-Factory has 21 more
listings in Resaw Band Saws.
Black Brothers 22-D-875-56, UV Top Roll Coater, 56" Nominal length, 8-3/4" diameter applicator, 6" thick, 34" passline, 1999
Category: Roll Coaters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Black Brothers
Model: 22-D-875-56
Year: 1999
BLACK BROTHERS - 22-D-875-56,.Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator & top only. -- Setup to 0" - 6" thick. -- Smooth Chrome applicator rolls and Chrome doctor rolls. -- Stationary feed speed drive, passline height 34". -- Drip Pan, Feed Pan, Continuous Flow ...more
Ex-Factory has 6 more
listings in Roll Coaters.
Cam-Wood #ST3VFD, 3-Roll Variable Speed Feeder, 10-79 FPM, 230 Volts, 3PH, 2026
Category: Roll Feeders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ST3VFD
Year: 2026
CAM-WOOD ST-3VFD Variable Speed 3-Roller Feeder -- With the powerful feeding strength, one can freely & simply assemble, dismantle & adjust it. It may be installed onto the circular saw, shaper, sander, router, planer serving as one’s invisible third hand at work. -- There are three (3) feed rollers on ...more
27" wide x 2' long, Unknown, gravity roller conveyor w/ legs
Category: Roller Type Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unknown
Gravity roller conveyor with legsQuantity and dimensions: -- 24" Overall, 2" roller 3"-4" center adjustable legs: (202) 10' long (26) 9' long (22) 7' long, (16) 6" long = Total 2,510' long -- 27" overall width, 2" roller, 4.5" center, adjustable legs: (72) 10' long (24) 7' long = Total: ...more
Ex-Factory has 14 more
listings in Roller Type Conveyors.
Rotary Drum Dryers
2 Results
7.5' x 24' Sprout #7.5-ft.X24-ft., Rotary Drum Dryer, Natural Gas Burner, Belt Drive w/Gear Reducer & Electric Motor, Trunnion Bases, 2000
Category: Rotary Drum Dryers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sprout
Model: 7.5 FT. X24 FT.
Year: 2000
ANDRITZ SPROUT 7.5' X 24' DRYER (ROTARY DRUM) + GAS BURNER:Complete with the following components: -- 7.5 Ft. x 24 Ft. Steel Rotary Dryer Drum. -- Natural Gas Burner (may be converted to LP) with 13.5 Ft. Refractory Lined Furnace Tube. -- Belt Drive with Gear Reducer and Electric Motor. -- Trunnion Bases ...more
Ex-Factory has 1 more
listing in Rotary Drum Dryers.
Rotary Screw Air Compressors (Positive Displacement)
6 Results
21 cfm @ 125 psi, Kaeser #SX-5, rotary screw air compressor, 5 HP TEFC motor, 1800 RPM, 2014
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kaeser
Model: SX-5
Year: 2014
KAESER - SX 5: Air Compressor w/Dryer5 HP TEFC Motor - 1,800 RPM: Single-stage; oil injected rotary screw air end; 21 CFM at 125 PSI; high efficiency air & oil cooler; 4-micron air intake filter with: Replaceable, cleanable cartridge. -- Approx (2,994) hours; complete with: Automatic dual control allowing unit to ...more
Ex-Factory has 5 more
listings in Rotary Screw Air Compressors (Positive Displacement).
Rotary Valves (Airlock Valves)
3 Results
10" Oneida Air Systems #SAZ100001, rotary air lock, 10" dia. flange, .25 HP hollow shaft helical gear motor, 10" round inlet outlet, 2026, new
Category: Rotary Valves (Airlock Valves)
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Oneida Air Systems
Year: 2026
ONEIDA AIR SYSTEMS SAZ10000C Rotary Air LockONEIDA Air Locks use a high-efficiency helical drive, US-made 0.25 HP hollow shaft gear motor to control the flow of discharge material from the dust collector via a rubber-padded wheel that rotates at a preset speed. The airtight seal with the collector is maintained at all ...more
Ex-Factory has 2 more
listings in Rotary Valves (Airlock Valves).
4700 cfm, Extrema #" DB-75.3-YPHOON, blower, 7.5 HP, 12" inlet, 13.5" impeller, 14" outlet, heavy duty 13.5" diameter dynamically balanced steel impeller, rotatable collection port, 2026
Category: Rotary-Positive Blowers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: DB-75.3-YPHOON
Year: 2026
EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. ...more
Ex-Factory has 3 more
listings in Rotary-Positive Blowers.
Rotary/Sliding Vane Air Compressors
1 Result
10 HP Mattei #Blade-7-LX-TM-SE, Tank-Mounted Rotary Vane Air Compressor w/ Dryer, 39 cfm @ 115 psig, 61 db(A), 80 gallon, 2026, new
Category: Rotary/Sliding Vane Air Compressors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mattei
Model: BLADE-7-LX-TM-SE
Year: 2026
MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE s proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on ...more
Centauro #AG-125, Tool Grinder, for V-Type Gouges, Tabletop design, 2026, new
Category: Saw Sharpeners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Centauro
Model: AG-125
Year: 2026
CENTAURO AG-125 Tool Grinding Machine for V-Type Gouges. -- Tabletop design saves space. -- Works with most sizes of V-gouges. -- Optional standing base $414.00. -- Diamond stone cutting wheels, ordered separately, price $636.00 each. -- Please specify the required voltage and lathe model when ordering wheels.
Ex-Factory has 1 more
listing in Saw Sharpeners.
Friulmac, dual feed double end trim saw, 59" saw, 2006
Category: Saw Trimmers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Friulmac
Year: 2006
FRIULMAC - Dual Feed: Double End Cutoff SawFor squaring the workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw; motorized opening with LED readout on the control panel; left hand fixed with left hand fence line. -- Hopper Magazine ...more
Baker #Mini-Scragg, Scragg Mill, 6" diameter x 96" L log, 1" or 1.25" x 14' 2" L blade capacity, (2) 20 HP main, 5 HP feed, 65 FPM, 2026, new
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: MINI-SCRAGG
Year: 2026
BAKER Mini-Scragg Saw Mill Accepts logs up to 16" diameter to 8' 0" (96") long and blades adjust to preset width from 3-1/2" to 12" and will accept edge slabs up to 14" across.: -- (2) Main Drive 20 HP "TEFC" motors and a 5 HP variable speed hydraulic feedworks motor; 0 - 65 FPM feed speed. -- Blade capacity: 1" ...more
Ex-Factory has 6 more
listings in Sawmills.
140000 lb. Avery Weigh Tronix #BMS-3010, 30' - 70' truck scale
Category: Scales
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Avery
Model: BMS-3010
Avery Weigh Tronix Truck Scale 30' --30-feet long and can be expanded to 70-feet long by purchasing an additional section from manufacturer --Capacity is 140,000 lbs -- The scale was calibrated regularly and in working condition when removed from service. This scale is ready to use.
Scissor Lifts
34 Results
1000 lb. Autoquip #48S40-DL, Scissor Lift, 48" x 144" platform, 48" travel w/7" lowered H, (32) sec speed, 24" x 130" base frame, 2026, new
Category: Scissor Lifts
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Autoquip
Model: 48S40-DL
Year: 2026
AUTOQUIP 48S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 144" smooth steel platform top. -- 48" Travel with a 7" lowered height and a 55" raised height; (32) Sec up and down speed. Base frame 24" x 130". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled ...more
Ex-Factory has 33 more
listings in Scissor Lifts.
Scrap Baler and Scrap Metal Balers - Ferrous
3 Results
Sierra #700T, baler / logger, (2) 100 HP motor, 1997
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sierra
Model: 700T
Year: 1997
SIERRA - 700T: Shear Baler: -- Motors: (2) Electric 100 HP. -- Preload Table. -- Precompression. -- Shearing: 14 - 17 Tons per hour. -- Baling: 12 - 14 Tons per hour. -- Logging: 15 - 17 Tons per hour. -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; ...more
Ex-Factory has 2 more
listings in Scrap Baler and Scrap Metal Balers - Ferrous.
Scrap Crushers
1 Result
Hustler #FC-2, Glass Crusher, 104" outside dimension x 122" L x 65" Tall at the longest point, (2) shut off switches, 2014
Category: Scrap Crushers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hustler
Model: FC-2
Year: 2014
HUSTLER - FC-2,.Screen: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65": -- (2) Shutoff switches.
Keestrack #Frontier, screen, 600 ton, 2007
Category: Screens
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Keestrack
Year: 2007
KEESTRACK - Frontier: Portable ScreenerTechnical -- Capacity: Up to 600 ton. -- Weight: 30 Ton. -- Screen box (L x W): 4,500 x 1,800 mm. -- Feed hopper in HB450: 8 cbm. -- Hydraulic folding hopper for transport. -- Heavy-Duty Plate Apron Feeder: 3,560 x 1,300 mm. -- Loading height. Open back wall: 2,420 mm; half open ...more
Screens and Sifters
2 Results
36" x 120" Custom Built #3-ft.-X10-ft., Disc Screen, 9 Rows of Discs, shaft mounted, Row-to-Row Drive Chain, Motor Platform (no motor or reducer)
Category: Screens and Sifters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Custom Built
Model: 3 FT. X10 FT.
Custom Built Disc Scalper;Includes the following s: --3 Ft. Wide X 10 FT. Long. --Fitted with 9 Rows of Discs, shaft mounted. --Drive Chain connected Row-to-Row. --Motor Platform (no motor or reducer). --Mounted onto a Steel Frame. --Bottom and End Discharge.
Ex-Factory has 1 more
listing in Screens and Sifters.
36" diameter x 18' long, Martin #3X18, Ribbon Screw Paddle Conveyor, 18' 4" L x 37" width x 46" H inside dims., 36" pitch, (18) adj. paddles, 2010
Category: Screw Type Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Model: MARTIN #3X18
Year: 2010
MARTIN 36" Ribbon Screw Paddle Conveyor. A Combination Ribbon Blender and Paddle Blender Auger with the following additional s: -- Approximate inside dimensions: 18 Ft. 4 In. long x 37 In. wide x 46+ In. high. -- Ribbon screw : -- 36" diameter Ribbon (screw) 36"; pitch, RH, 5"; wide ribbon screw w/1 ¼"; posts ...more
Ex-Factory has 1 more
listing in Screw Type Conveyors.
Jackson #30D10H, Shaving Mill, 66" Hopper Box, 24" x 20' belt conveyor, 32' Log Deck, Knife Sharpener, 2002
Category: Shaving Mills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jackson
Model: MODEL 30D10H
Year: 2002
30-series hydraulic drive machine, with special-length 66" hopper box. standard-gib heads, but can be upgraded to the Knife Cartridge System™.Factory-mounted diesel power unit for heads and hydraulic unit.Belt conveyor under shaving mills is 24 in. wide x 20 ft. long, installed under machine to discharge ...more
Sheet Metal Duct Machinery
1 Result
Ductwork dust pipe, misc items
Category: Sheet Metal Duct Machinery
Seller: Ex-Factory
Location: Charlotte, NC
Dust Collection Pipe (Snap Ring Type Pipe)Quantity - Diameter - Length (2) 22" - 12" - 38" Branch.(1) 24" - 12" - 38" Branch.Many loose Snap Rings in the tote.(1) 25" - 59" Pipe.(4) 22" - 59" Pipe.(2) 24" - 59" Pipe.(1) 24" x 22" x 6" 21"; Reducer with branch.(1) 22" x 20" x 12" 33"; Reducer with branch.(1) 11" x 10" ...more
Shredders
15 Results
Genox #V800, Single Shaft Shredder, 59" x 56" hopper opening, 15.75" diameter Rotor, 50 HP, 2026, new
Category: Shredders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Genox
Model: V800
Year: 2026
GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!s: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain ...more
Ex-Factory has 14 more
listings in Shredders.
John Deere #333G, track skidder, 100 HP @ 2500 RPM, 30 gallon fuel tank, MH60D mulch head, 2023
Category: Skidders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: John Deere
Model: 333G
Year: 2023
JOHN DEERE - 333G: Track Loader w/ MH60D Mulch head, Bucket, and Hay Spear -- Engine: 74.6 kW (100 HP) @ 2,500 RPM. -- Speed: 2-Speed; high 12.6 kM/Hr (7.8 MPH). -- Fuel Tank: 30 Gal. -- Track Width: 17.7 In. -- Hours: 250. s -- MH60D Mulch head. -- Standard bucket. -- Hay spike. -- Cab: ROPS /FOPS Structure with ...more
Ex-Factory has 2 more
listings in Skidders.
27.5" Unimak #ESM-700-F1, Foil Slitter w/ Rewinder, 23-5/8" roll diameter, 1 mm thickness, 328 FPM, (34) knives, 2026, new
Category: Slitters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unimak
Model: ESM-700-F1
Year: 2026
UNIMAK ESM 700 F1 Rewind Slitter with Rotary KnivesUNIMAK offers a well-built machine with air shafts and rotary knives for slitting heavier products up to 1 millimeter thick. This machine is set up for slitting edgebanding stock from a bulk roll. Technical : -- Working Width 700 mm (27.5"). -- Max. Roll Diam. 600 mm ...more
Soil and Landfill Compactors
2 Results
Cram-A-Lot #SCR-T2-34, compactor, (2) 4" cylinder, 10 HP, 41" x 58" feed opening, 2010
Category: Soil and Landfill Compactors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cram-A-Lot
Model: SCR-T2-34
Year: 2010
CRAM-A-LOT - SCR-T2-34: 34-Yard Self-Contained Compactors -- Cylinder: (2) 4". -- Main motor: 10 HP. -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm). -- Capacity: 34-Yard. -- Ram force: Up to 24 tons.
Ex-Factory has 1 more
listing in Soil and Landfill Compactors.
Custom Built #Green-Chain, Grade & Sort Line, 4-strand, 40' long x 10' wide
Category: Sorting Lines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Custom Built
Model: GREEN CHAIN
GREEN CHAIN - 4-STRAND,.40 Ft. Long x 10 Ft. Wide -- Manufacturer unknown. -- Spacing is (4) feet, (4) feet, and 2 feet. -- Includes: Drive and wooden flooring. -- Used indoors; good condition.
8" Cam-Wood #FSS-6ML-8X, Lumber Stacker, 244" L x 8" width x 3-1/2" thick working dims, 78" L x 39" width x 50" H staking dims, 4 arm stacker, 2026, new
Category: Stackers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD FSS-6ML 8" X 20' Lumber StackerLumber Stacker up to 20 Feet longWorking dimensions: -- Lenght 6,200 mm (244") -- Width 25mm to 205 mm (1' to 8") -- Thickness 25mm to 90 mm ( 1" to 3 1/2") Stacking package dimensions: -- Length 78"; to 244"; (2000 – 6200 mm) -- Width 39"; (1000mm) -- Height 39"; ...more
Ex-Factory has 6 more
listings in Stackers.
Steel Slat and Chip Conveyors
2 Results
33" x 30" Lewco #SPM-33-30-PP94, Heavy Duty Support Legs, 2026, new
Category: Steel Slat and Chip Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lewco
Model: SPM-33-30-PP94
Year: 2026
LEWCO SPH-33-30 Heavy-Duty Conveyor Supports: -- : SPH Heavy Duty Support Assembly. -- Height of Support: 33 Inches. -- Width of Support: 30 Inches. -- Model Finish Color: 94 - Traffic Blue (RAL 5017).
Ex-Factory has 1 more
listing in Steel Slat and Chip Conveyors.
Stone CNC Work Centers
7 Results
Breton #NC-260, CNC Work Center w/ATC, 3-Axis, 90.6" X, 137.8" Y, 10.2" Z, 140" x 88" Bed, (2) 18-Position Tool Racks, 19 HP Spindle, 9000 RPM, 2009
Category: Stone CNC Work Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Breton
Model: NC-260
Year: 2009
2006 BRETON - Contour NC 260: CNC Machining Center3-Axis multifunctional Work Center for: Carving, milling, drilling, grinding, polishing, profiling, inlaying, aging, etc. Complete with: -- Automatic tool changer. -- (2) Side mounted 18-position linear tool racks on either side of worktable. -- HSK-B80 Tool holders. ...more
Ex-Factory has 6 more
listings in Stone CNC Work Centers.
Stone Polishing Equipment
1 Result
Sasso #Flying-Flat, Linear Polisher, 8-Spindle, 200-600 mm Piece thickness, 4" x 14" min. Piece Size, 130 mm Wheel diameter, (2) 36" Infeed/Outfeed Tables, 2006
Category: Stone Polishing Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sasso
Model: FLYING FLAT
Year: 2006
SASSO - Flying Flat: Linear PolisherHigh-Speed vertical backsplash machine with: (8) Spindles, infeed & outfeed support rollers. -- Workpiece dimensions: Piece thickness: 200 mm - 600 mm; min. piece size: 4" x 14". -- Spindles: (5) Grinding & Polishing spindles; (2) chamfering spindles; (1) multifunctional ...more
Storage Equipment (Cabinets And Tables)
1 Result
Dust-Ex #AGXX, Abort Gate/Valve, 10" x 10" x 6" NEMA enclosure, 22" x 22" pneumatic enclosure, 2026, new
Seller: Ex-Factory
Location: Charlotte, NC
Model: DUST-EX #AGXX
Year: 2026
DUST-EX AG22 Abort Gate/Valve. Automated two-way air stream diverter valve which prevents fires and explosions in dust collection systems and reduces the risk of fire in explosive prone work environments. A "safety measure essential" when clean air is returned to a building. -- Consists of: A lever arm that ...more
Straight Line Rip Saws
55 Results
Cam-Wood #TRS-0016, straight-line rip-saw, 10"-16" single blade, 1" arbor diameter, 30-85 RPM, automatic lube, 2026, new
Category: Straight Line Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TRS-0016
Year: 2026
CAM-WOOD TRS-0016X 16"; Single RipTop Cut : Maximum Cutting Depth 5" -- Arbor Diameter 1" -- Saw Blade Size 10" ~ 16" --Table Dimensions 40" x 70" -- Spindle Speed 3600 RPM -- Feeding Speed (FPM) 30 ~ 85 -- Throat to Blade Depth 20" -- Main Motor 20 HP -- Feed Motor 1 HP -- Feed Chain Width 6" 6" -- Automatic ...more
Ex-Factory has 54 more
listings in Straight Line Rip Saws.
Altendorf #F-45/ELMO-4, Programmable Sliding Table Saw, 17.72" diameter blade, 130.12" max. cutting length, 3.94" max. depth of cut, 7.5 HP motor, 6000 RPM, 1998
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Altendorf
Model: F-45 (ELMO 4)
Year: 1998
ALTENDORF - ELMO 4 CE ,. 3,400 mm (11') 4-Axis Programmable Sliding Table Saw -- Max. cutting length 3,305 mm (130.12"). -- Max. depth of cut with 350 mm (17.72"); dia. blade: 0 - 100 mm (0" - 3.94") at 90, 0 - 70 mm (0" - 2.76") at 45. -- Dado cap. 15 mm (0.59"). -- Main saw 5.5 kW (7-1/2 HP) motor with: ...more
Ex-Factory has 21 more
listings in Table Saws.
Tank Mounted Air Compressors
3 Results
5 HP Cam-Wood #AC-5080X, Piston Air Compressor, 18 cfm @ 90 psi, 2-stage pump, 80 gallon vertical tank, 2026, new
Category: Tank Mounted Air Compressors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: AC-5080X
Year: 2026
CAM-WOOD AC-5080X Piston Air CompressorCompact unit with a 5 HP induction motor.s & : -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- ...more
Ex-Factory has 2 more
listings in Tank Mounted Air Compressors.
94.5" x 189" Glaston #RC-200-2448, Flat Glass Tempering Furnace, 715°C, Ind & Outfeeds, Quenching Station, 400 V., 2012
Category: Tempering Furnaces
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Glaston
Year: 2012
GLASTON RC 200 2448 - Flat Glass Tempering Furnace For Low-E Glasses - 2.400 x 4.800 mm (94,5" x 189")Tempering Furnace which utilizes optimized heating system with convection, which additionally heats the top of the glass for convection purposes.The most important of these are individual heating element controls ...more
Ex-Factory has 1 more
listing in Tempering Furnaces.
Aldo Berrone #Airone-2, single end tenoner, 3 station tenoner, 10" blade
Category: Tenoners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Aldo Berrone
Model: AIRONE-2
ALDO BERRONE AIRONE 2 Single End Tenoner3-Station Tenoner with Trim; top & bottom tenons and cope head with manual sliding table. -- 1st Station: Trim saw, 10" max. dia. saw blade. -- 2nd Station: Top & bottom tenon heads, 25 mm dia. x 3-15/16" long spindles, 3/16" - 2-1/16" max. tenon thickness, 3 HP motor ...more
Ex-Factory has 30 more
listings in Tenoners.
Tooling and Accessories - Miscellaneous
2 Results
10' Atech #KN-MD, Manual Roller Table, digital read out, 2026
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Atech
Model: KN-MD
Year: 2026
ATECH KN-MD Manual Roller Table with Digital Read-Out10' Manual infeed table w/digital read-out, enables precise reading of cutting measurement, eliminating inaccurate and repetitive use of a measuring tape. -- Manual positioning via hand wheel. It can be used with various types of saws such as upcut saws. ● ...more
Ex-Factory has 1 more
listing in Tooling and Accessories - Miscellaneous.
Trucks and Flatbeds
1 Result
Benlee #Super-Mini, long trailer loader, 2022
Category: Trucks and Flatbeds
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Benlee
Model: SUPER-MINI
Year: 2022
SUPER MINI BENLEE ROLL OFF TRAILERNew in 2023 - Used Approx 3 Months Roll off Trailers come in all sizes. The Super Mini Long roll off trailer is a great unit for those that are carrying roll off boxes up to 30′, so up to about a 60 Yard box. Of course 20, 30, and 40 yard boxes that are about 23′ feet are ...more
Turbo-centrifugal Blowers
1 Result
53000 cfm, Twin City #445/BCS, Blower/Fan/Motor, 73.5" x 24.5" diameter Inlet, 47.5" x 35.5" outlet, 2231 max RPM, 250 HP, 460 V, 2024
Category: Turbo-centrifugal Blowers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Twin City
Model: 445/BCS
Year: 2024
TWIN CITY FAN 445/BCS 53,000 CFM BLOWER/FAN/MOTOR: -- :Size/Model 445/BCS (Backward-Curved / High Volume/High Pressure/ Centrifugal Fan). -- The following are rated for a 250 HP, 460v, 3Ph motor.● Fan Motor, 250 HP, 460v, 3Ph motor. ● Design Class (26): ● FEI (1.08): ● Volumetric Flow (CFM) 53,000: ...more
Ultraviolet (UV) Curing Ovens
6 Results
Cefla #Ecogel-ALD/8+MPS-45, Drying Tunnel w/UV, 57.5' total Oven length, 380/400 V, 2014
Category: Ultraviolet (UV) Curing Ovens
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: ECOGEL ALD/8 +MPS 45
Year: 2014
Listed here is a CEFLA ECOGEL ALD/8 +MPS 45 drying tunnel with UVThis would be a great oven if you are spraying UV and want to precure it slightly before hitting the lamps on the end. It is a CEFLA ECOGEL tunnel. Basicaly it is a flash off tunnel composed by laminair hot air, IR lamps and TL lamps + 2 UV lamp. Length ...more
Ex-Factory has 5 more
listings in Ultraviolet (UV) Curing Ovens.
Vacuum Formers and Thermoformers
2 Results
Orma #Duplex-30/13, Thermo Forming System, 118" x 51", 4" H chamber, 27.5" working H, 12 kW, 392 deg F, 19.5" work piece H, 2026, new
Category: Vacuum Formers and Thermoformers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Orma
Model: DUPLEX-30/13
Year: 2026
ORMA MACCHINE Duplex 30/13 Forming Press for Solid Surface and Dye Sublimation Printing:Combination Oven and membrane forming press for solid surface materials and Dye sublimation printing. -- For solid surface, the parts are placed in the oven below the platen and are heated until they are soft enough to form. The ...more
Ex-Factory has 1 more
listing in Vacuum Formers and Thermoformers.
Vacuum Membrane Presses
15 Results
Burkle #Multifoiler-BTF1528-1400, Membrane Press, 59" x 110.2" Platen Capacity, 400 V., 2010
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: MULTIFOILER-BTF1528-1400
Year: 2010
BURKLE BTF 1528-1400 Automatic Pin Press with (2) Trays, and Panel Turnover Device.Designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without the use of a membrane. This configuration allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film ...more
Ex-Factory has 14 more
listings in Vacuum Membrane Presses.
2400 cfm, Ivision VCE-1570, dry industrial vacuum, 2.7 HP, 4" inlet, 42.27 gallons tank volume, 2026, new
Category: Vacuum Pumps
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Industrial Vacuum
Year: 2026
IVISION VCE 1570 Industrial Vacuum Chip CollectorThe VCE 1570 is ideal for Double Head Saws or Miter Saws with (2) outlets.s: -- The excellence of design and construction technique creates extremely handling-friendly and virtually maintenance-free units with innovative technical solutions to get the best possible ...more
Vertical Band Saws
5 Results
11-3/4" x 23-1/2" Cam-Wood #BS-0242X, Band Saw, 24" wheel, 3 HP, 2800 RPM, 24" x 31-1/2" table, 2026, new
Category: Vertical Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BS-0242X
Year: 2026
CAM-WOOD BS-0242 Band Saws & : -- Large precision ground cast iron table. -- Precision ground cast iron rip fence. -- Slot-in-table for use of miter gauge. -- Large hand wheel for easy blade tensioning. -- 24" Wheels with vulcanized rubber and precision balanced, 3HP direct drive motor; blade speed 2,000 - 2,800 ...more
Ex-Factory has 4 more
listings in Vertical Band Saws.
Vertical CNC Machining Centers
5 Results
Biesse #Brema-EKO-2.1, CNC Vertical Machining Center, 102.3" X, 35.4" Y, 2.3" Z, 7.4 HP, 24000 RPM, 8-position automatic tool changer rotary tool plate, 2016
Category: Vertical CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: BREMA-EKO-2.1
Year: 2016
BIESSE - BRE.MA. EKO 2.1: CNC Machining Center (Vertical w/ATC/Boring) -- Flexible "Vertical" Machining Center. Can reach movement speeds of: 164 FPM (50 MPM) in "X" & "Y" axes; 98 FPM (30 MPM) in "Z" axis with total safety. -- Working CapacityMax. part size for "X" axis: 102.3" (2,600 mm); "Y" Axis: 35.4" (900 ...more
Ex-Factory has 4 more
listings in Vertical CNC Machining Centers.
Vibrating Screens
1 Result
72" x 240" Simco Symons #7220-1D-HD2, Vibrating Screen, Counterweight type, Food grade construction, Dust Cover, Double-crowned Screen Ball Deck w/ (6) Wire Screens, 2019
Category: Vibrating Screens
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Simco Symons
Model: 7220-1D-HD2
Year: 2019
6 Ft. x 20 Ft., Single-Deck Vibrating Screen;Complete with the following s: --Counterweight type Drive with TEFC Motor. -- Food grade construction throughout. -- Accessible hinged Feed Box. -- Dust Cover. -- Double-crowned Screen Ball Deck with (6) Wire Screens. -- Total screening area of 6’x20’. -- Fines ...more
Volumetric Feeders for Powder
2 Results
Barber-Colman Greene #MULTI-BIN, Material Feeder, (3) 8' x 8' Feed Bins w/Extenders, 24" Feeders, 24" Collecting Belt Conveyor
Category: Volumetric Feeders for Powder
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Barber-Colman
Portable Cold Material Feed Bin System manufactured by BARBER-GREENEWith the following Components and s: -- (3) 8' x 8' Material Feed Bins with Bin Extenders. -- Each Bin fitted with 24" Variable Speed Feeders that are set up for 3 HP A.C. Motors with DODGE Reducers but NO MOTORS are included. -- 24"Collecting ...more
Ex-Factory has 1 more
listing in Volumetric Feeders for Powder.
Wedge Cutting Machines
3 Results
Ruvo #2260, Wedge Cutter, (2) wedges from 1" x 2" material, self-diagnostic system, auto-shutoff, 230/460 V., 3PH
Category: Wedge Cutting Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ruvo
Model: 2260
RUVO 2260 Wedge Cutter. -- Data: Wedge and glue-block cutter. Allows for 1" X and 2" X material in the same hopper. Cuts (2) wedges out of 1" X material and (1) wedge out of 2" X stock. -- Self diagnostic system, walk-away, hands free operation. -- If not reloaded, the machine has an auto-shut-off at the end of the ...more
Ex-Factory has 2 more
listings in Wedge Cutting Machines.
Volvo #L90H, wheel loader
Category: Wheel Loaders
Seller: Ex-Factory
Location: Charlotte, NC
Model: L90H
Volvo L90H Wheel Loader: ● Static tipping load at full turn: 22,265 lbs ● Bucket capacity: 2.9 - 9.2 yd ● Log grapples: 1.6 - 2.9 yd ● Operating weight: 31,968 - 38,140 lbs ● Breakout force: 31,470 LBF ● Engine: Volvo D6J ● Max power: 1,400 - 1,900 RPM, ISO: 14,396 gross, 184 HP ...more
Window and Door Manufacturing Machinery (For Aluminum, Vinyl And Wood)
113 Results
Double-Sided, Hydraulic Clamp (Door & Panel), 3.5' x 7' & 3.5' x 8', 5 HP, 220 Volts, 3PH
Seller: Ex-Factory
Location: Omaha, NE
Mfr: Double-Sided
Model: HYDRAULIC
3-1/2’ x 7’ and 3-1/2’ x 8’ Double-Sided Hydraulic Door Clamp: -- 5 HP Hydraulic Unit.
Ex-Factory has 112 more
listings in Window and Door Manufacturing Machinery (For Aluminum, Vinyl And Wood).
Window Corner Cleaning Equipment
8 Results
Rotox #EPA-179, CNC Corner Cleaner, 140 mm profile width, 320 x 320 mm min. frame outside, 160 x 160 mm inside width, 200 l/min, 8 bar, 2003
Category: Window Corner Cleaning Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Rotox
Model: EPA 179
Year: 2003
ROTOX EPA 179 CNC Corner Cleaning Machine For Window FabricationFully Automatic CNC Corner Bead Cleaner with automatic turning station and inner corner cleaning capabilities for production of PVC window profiles.Technical :Profile width: 40 - 140 mm (1-5/8" - 5-1/2")Min. frame size: 320 x 320 mm (outside dimensions) ...more
Ex-Factory has 7 more
listings in Window Corner Cleaning Equipment.
Window Profile Machining Centers
44 Results
Elumatec #SBZ-122/33, CNC Profile Machining Center, 151.6" X, 13.8" Y, 11" Z, 149.6" Bed length, 9"/7" Routing capacity, 24000 RPM, 6 Tool Holder, 2013
Category: Window Profile Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: SBZ 122/33
Year: 2013
ELUMATEC - SBZ 122/33: CNC Profile Machining Center - 3.8 MTemplate-free CNC Profile Copy Router designed for machining: Aluminum & thin-walled steel profiles & extrusions; aluminum; PVC; light alloyed steel. It is particularly suitable for companies that are automating their Window & Door production ...more
Ex-Factory has 43 more
listings in Window Profile Machining Centers.
Wire Chopping Lines
1 Result
Mizar #PRP-M1-Pro Line, Wire Granulation Line, w/Single-Shaft Shredder, Granulator, Separator, Turbo Mill, Dust Collector, 1.1-35 kW, 2026
Category: Wire Chopping Lines
Seller: Ex-Factory
Location: Charlotte, NC
Model: PRP-M1-PRO
Year: 2026
MIZAR - CMT PRP M1 - Pro-line: Wire Granulation LineA single-shaft Shredder provides pre-crushing for all insulated: Cables, radiators, and mixed wires. It separates the material into smaller pieces, making it ideal for the granulator. -- Over Belt Magnetic Separator: Separates magnetic metals from materials ...more
Bruks #BK-DH-400X800L, Chipper Line, Drum Style, 32" Infeed Conveyor, 422 HP, 150 hours
Category: Wood Chippers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bruks
Model: BK-DH-400X800L
BRUKS-KLOCKNER - BK-DH: 400 x 800 - L Chipper Line with: 315 kW (422 HP) DriveComplete with: -- 422 HP Main Drive Motor with: Electrical Cabinet with starter. (VFD drive to be verified.) -- Powered Infeed System. -- 32" Infeed vibrating Conveyor with: Fiberglass Section. -- Chain outfeed Conveyor. -- s: MESUTRONIC ...more
Wood Finishing Equipment
25 Results
Barberan #PUR-21-L, Profile Wrapping Equipment w/Melter & Cut-Off Saw, 33.5" Work height, 7.88" diameter Saw blade, 8" slot die coater, 39-100 FPM, 2013
Category: Wood Finishing Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Barberan
Model: PUR-21-L
Year: 2013
BARBERAN PUR Profile Wrapping Equipment with Nordson Melter and Flying Cut-Off Saw; Barberan PUR 21 L Complete System 8" Max. slot die coater with NORDSON pail unloader. -- Ideal application: For continuously wrapping profiles with vinyl or paper foils using PUR or EVA Hot Melt Glue. -- Operational characteristics: ...more
Ex-Factory has 24 more
listings in Wood Finishing Equipment.
Voorwood #P-78, Groove Foiler, 0.5"-1.75" Part thickness, 4"-48" Part width, 0.375" Cut depth, 2015
Category: Wood Foiling Machine
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Voorwood
Model: P 78
Year: 2015
VOORWOOD - "P78": Groove Foilers the following stations: Station-1: Score; Station-2: Shape; Station-3 & 4; Sand; Station-5 & 6; Finishing Heads. Machine cuts a single plough (bluff cut) to the desired profile in a MDF drawer front or similar component; then, sand & apply transfer finish to the plough; all ...more
Wood Grinders and Hogs
17 Results
Bandit #19XPC-TK, Drum Style Hand-Fed Chipper, 37" x 22" drum w/4 knives, 33.75" x 64" infeed w/folding tray, 173 HP diesel engine, Caterpillar 305CR rubber track
Category: Wood Grinders and Hogs
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bandit
Model: 19XPC-TK
Year: 2023
BANDIT INTIMIDATOR 19XPC-TRACK DRUM STYLE HAND-FED CHIPPERThe Intimidator 19XPC Track is the most popular all-terrain chipper, especially with companies performing land clearing and wildfire mitigation services.: -- Cat 174 or 225 / Deere 173 horsepower diesel engine options -- 37" diameter x 22" wide drum with four ...more
Ex-Factory has 16 more
listings in Wood Grinders and Hogs.
Cam-Wood #Cutmate-3400, Veneer Guillotine, 134" cut length, 4.7" daylight, 25.6" cut width, 5.91" beam width, 2.36" knife cylinder, 2026, new
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-3400
Year: 2026
CAM-WOOD CUTMATE 3400 Single Knife Guillotine suitable for veneer, paper, and plastics. -- Overall : Cutting Length: 3400 mm (134"); Daylight Opening: 120 mm (4.7"); Veneer Thickness of Single Sheet: Max. 0.1" (2.5 mm ) recommended use with 'TrimEasy' for more than 1.2 mm (0.047"); Cutting Width: 25 ~ 650 mm ...more
Ex-Factory has 35 more
listings in Wood Veneer Machines.
400 HP Boilersmith 400-HP, Wood-Fired Boiler, 250 psig, 2600 sq.ft. SA, 2006
Category: Wood-Fired Boilers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Boilersmith
Model: 400 HP
Year: 2006
BOILERSMITH 400 HP BOILER, WOOD-FIRED -- Wood-Fired BOILERSMITH Boiler fitted with CHALLENGER Combustion Unit. -- Complete with the following major components and s: -- 250 PSIG design pressure. -- BOILERSMITH Boiler Model HRT2H8-2600SF-XW-250 with 2600 Sq. Ft. boiler surface area. -- Fuel can vary in moisture up to ...more
Woodworking - General Machines
27 Results
Baker #Stakemaster, Stake Sharpener, 3000 stakes/hr, (2) 6" diameter x 4.5" L cutter, 2.5" arbor diameter, (2) 7.5 HP, 3" H x 8" width x 96" L material size, 2026, new
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: STAKEMASTER
Year: 2026
BAKER STAKEMASTER Stake Sharpener The StakeMaster is fully automatic. Material is stacked in the hopper. The machine automatically pushes material from the bottom of the stack across the cutters. The Baker StakeMaster is capable of processing up to 24,000 stakes per shift. s: -- Two 7-1/2 -HP saw arbor motors -- ...more
Ex-Factory has 26 more
listings in Woodworking - General Machines.
Woodworking Boring Machines
53 Results
1 Spindle, Cam-wood #BR-25X, horizontal boring machine, single spindle, 2 HP - 3450 RPM, 3-phase, 5" horizontal spindle travel, 3" thickness, 2026, new
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BR-25X
Year: 2026
CAM-WOOD BR 25 Horizontal Drills & : -- Single Spindle, 2 HP - 3450 RPM 3-phase motor, adjustable vertically and front to back. -- 5" Horizontal spindle travel (drilling depth) w/foot pedal control. -- 3-1/2" Vertical table adjustment. -- Pneumatic hold-down clamp for up to 3" thickness. -- 12" x 10" Table size. ...more
Ex-Factory has 52 more
listings in Woodworking Boring Machines.
Woodworking CNC Machining Centers
55 Results
A.e.s #Sirius-950M, CNC machining center, 37" Y, 2" Z, 18k RPM, 6 ATC, 2018
Category: Woodworking CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: A.e.s
Model: SIRIUS-950M
Year: 2018
AES SIRIUS 950M ATC CNC MACHINING CENTER (FEED THRU): Owner says SELL IT. MAKE AN OFFER!!! -- :Automatic CNC feed through Point to Point Boring Machine that combines flexibility and high productivity.A perfectly suited solution for small to midsize companies & artisans in need of an automatic solution for ...more
Ex-Factory has 54 more
listings in Woodworking CNC Machining Centers.
Woodworking CNC Routers
79 Results
Andi #EXXACT-DUO-PLUS/TC2, CNC router, 10 TAC, 6' x5'tbl., 24k RPM, 2017
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Andi
Model: EXXACT-DUO-PLUS/TC2
Year: 2017
ANDI - EXXACT DUO PLUS/TC2: CNC Router w/ATC -- Twin 6' x 5' (72" / 1,840 mm) x 62" (1,600 mm) Moving tables in left to right configuration; each with: (1) Vacuum zone; tables can be locked together to create: (1) 5' x 12' Worktable. -- : (2) 18 HP HSK-63F ANDI Router spindles.Programmable spindle ...more
Ex-Factory has 78 more
listings in Woodworking CNC Routers.
Woodworking Edgebanders
114 Results
Biesse #Akron-245, Edgebander, .33 HP, 12000 RPM, 39 FPM, 600 V., 2003
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-245
Year: 2003
BIESSE AKRON 245 Edgebander with Corner Rounding: Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.: -- 0.4 - 8 mm (5/16") Cap. Edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.: -- Adjustable top pressure beam ...more
Ex-Factory has 113 more
listings in Woodworking Edgebanders.
Woodworking Hot Presses
12 Results
Burkle #ODW-1426/300, Melamine Press Line, 4' x 8' format, 90 boards/hour, 510,000 BTU/h boiler, Siemens Simatic Operator Interface, 480 Volt, 2007
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: ODW 1426/300
Year: 2007
BURKLE ODW 1426/300 4' x 8' Automatic Short-Cycle Through Feed Melamine Press LineProduction Capacity:Press time ranges from 20 - 40 Sec, depending on the thickness of the paper and the resin coat. With a press time of 25 Sec and a handling time of approx. 15 Sec, the output capacity is (90) boards per hour. ...more
Ex-Factory has 11 more
listings in Woodworking Hot Presses.
Cam-Wood #IAH-SC, End-Less Auto Finger Jointer System, 1/2" -3" thick x 1.4"-10" width Timber Work Size, 18 MPM, 20 HP, 5500 RPM, 240/480 V, 2026
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: IAH-SC
Year: 2026
CAM-WOOD IAH-SC Inverter Drive, End-Less Auto Finger Jointer SystemFinger jointer shaper with gluer and troughfeed press for unlimited lengthTechincal : -- Infeed timber working length(min-max) L = 300MM ~ 2500MM (11.9" - 98.4") --Timber length to be processed must be at least 50% longer than the timber width to ...more
Ex-Factory has 37 more
listings in Woodworking Jointers.
3-1/8" x 11-13/16" Locatelli OMK-300/UF, woodworking lathe, 6-station rotary drum, 5.5 HP, 2026, new
Category: Woodworking Lathes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Locatelli
Year: 2026
LOCATELLI OMK-300 Automatic Novelty Lathe, Sanding and Drilling: -- 11-13/16" Max. between centers, 3-1/8" max. and 5/16" min. stock dia., 5.5 HP spindle motor with 3,020, 4,580 & 6,400 RPM spindle rotation. -- 6-Station Rotary Drum with the following operations - -- Station #1: Pickup & centering of ...more
Ex-Factory has 26 more
listings in Woodworking Lathes.
Woodworking Mortisers
6 Results
Bacci #MOD, oscillating slot mortiser, 2000
Category: Woodworking Mortisers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bacci
Model: MOD
Year: 2000
BACCI - MOD: Slot MortiserAutomatic double table round end Mortiser; Mortises or bores holes on chair, furniture or case goods.Technical -- (2) Tables & spindles; (1) table on each side to eliminate dead cycle time. -- 3 HP - 9,400 RPM Motor; spindles belt driven; 3 HP oscillation motor with: (224) ...more
Ex-Factory has 5 more
listings in Woodworking Mortisers.
Bacci #TTF-1, Miter/Mortise/Tenon Door Machine, 45 deg miter frame door production, 3 HP w/400 mm blade diameter, 7-1/2 HP shaper, 60 mm boring depth, 1998
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bacci
Model: TTF 1
Year: 1998
BACCI TTF1 T2M Cabinet Miter Door Machine Cutting boring and moulding machine, designed for 45 miter frame door production, with each cycle the parts are trimmed drilled and finger jointed; single sided cutting-boring-molding machine. : -- Hydraulic control of table stroke; ball bushing and ground and hardened guides ...more
Ex-Factory has 83 more
listings in Woodworking Moulders.
Woodworking Panel Finishing Systems
5 Results
Cefla #RotoStain-RT-2000, Rotary Stain Machine, 20-Gun, 0"-51" Work width, 12" min. Work length, 65" Continuous Belt, 2-11 MPM, 10.7 kW, 2005
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: ROTOSTAIN RT 2000
Year: 2005
CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain ROT 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized ...more
Ex-Factory has 4 more
listings in Woodworking Panel Finishing Systems.
6" x 2" Weinig #Unimat Super 4 W/ Feeder, 7000 RPM, 15 HP, 400 V., 2006
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weinig
Model: SUPER 4
Year: 2006
WEINIG UNIMAT SUPER 4. Planer & Through Feed Moulder; 3-Head (B-T-B)Four-sided processing with only 3 spindles, with combination tool on top spindle. Ensures parallelism and an exact 90 degree angle. Perfection for gluing solid boards. The compact, space-saving Unimat Super 4 is ideal for preparing stock for the ...more
Ex-Factory has 64 more
listings in Woodworking Planers.
Woodworking Presses and Cold Presses
38 Results
Burkle Multifoiler-BTF-1534, membrane press w/pin + 2-t, 59" x 134" platen, 52.3" x 128" tray area, 10" daylight, 2-1/8" workpiece thickness, 85 PSI, 2006
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: MULTIFOILER BTF 1534
Year: 2010
BURKLE 1534-1400 Automatic Pin Press with Membrane, (2) Trays, and Panel Turnover Device.Designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without a membrane. This configuration allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film thickness. ...more
Ex-Factory has 37 more
listings in Woodworking Presses and Cold Presses.
Crouch #315, Automatic Feed-Through Shaper & Sander, 4" -7" cutter capacity, 60° forward tilt 1" diameter sanding spindle, 7.5 HP, 6200 RPM, 230 Volt
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Crouch
Model: 315
CROUCH 315 Feed Through Shape and SandFeed through, single sided Profile Shaper/Sander; accommodates up to 2" thick material. -- : (1) 7-1/2 HP - 6,200 RPM Shaping station, 4" - 7" dia. cutter cap., 1-1/4" dia. spindle, horizontal adjustments with digital indicator for shaper & fence settings. -- (2) 2 HP - 400 to ...more
Ex-Factory has 66 more
listings in Woodworking Sanders.
Auto-V-Groove #AVG-48-MFT, Universal V-Groover, 48" material width, 1-1/4" thickness, 3-1/4" cutter width, 84" x 24" main table, 1998
Category: Woodworking Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Auto-V-Groove
Model: AVG-48 MFT
Year: 1998
AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- :(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- s:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP ...more
Ex-Factory has 14 more
listings in Woodworking Saws.
Balestrini #Mini/C, Reciprocating Double Sided Copy Shaper, (2) offset shaping heads, 98" reciprocating length, 7" H, 8" between spindles
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Balestrini
Model: MINI/C
BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPER: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end ...more
Ex-Factory has 29 more
listings in Woodworking Shapers.
Allegheny Bradford #18-250C, Shredder, 20 HP, 1/2" Straight Cut, 208 V., 2003
Category: Woodworking Shredder
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Allegheny Shredders
Model: 18-250C
Year: 2003
ALLEGHENY - 18-250C,.Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck.
Ex-Factory has 23 more
listings in Woodworking Shredder.
Woodworking Spindle Shapers
12 Results
Cam-wood #SP-750X, fixed spindle shaper, 4" dust hood, 48" x36.5' ' table, 1' ', 1.25 spindle, 2026, new
Category: Woodworking Spindle Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SP-750X
Year: 2026
CAM-WOOD SP-750 Heavy Duty Shaper. 7.5 HP: -- Table size: 48 x 36.5'' -- Height of Working Table: 35-1.2". -- Spindle 1'',1.25''. -- Motor: 7.5 HP (10 HP Opt.). -- Speed (RPM): 3,000/4,500/7,500/10,000. -- Dimensions: 53' 'x 43'' x 51''. Weight: 1480 Lbss: --Designed for ...more
Ex-Factory has 11 more
listings in Woodworking Spindle Shapers.
Woodworking Tooling & Accessories
2 Results
Tigerstop #TS-12, Programmable Stop/Pusher NC System, 12' working length (14' overall material length), automatic fence positioning, 110 V., 60 Hz, 1-Ph., 2022
Category: Woodworking Tooling & Accessories
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Tigerstop
Model: TS-12
Year: 2022
TIGERSTOP - TS-12 NC: Programmable Pusher & Stop NC System Automates: Cutoff Saws; Drill Presses; Line Borers; Sliding Table Saws; Panel Saws and more! -- "TS-12" replaces your existing fence with a working length of 12'-0" with: Overall material length of 14'-0". -- Automatic positioning of the fence via ...more
Ex-Factory has 1 more
listing in Woodworking Tooling & Accessories.
Wrapping Machines (including Shrink Wrappers)
11 Results
Lantech #Q-1000, automatic stretch wrapper
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lantech
Model: Q-1000
LANTECH Q-1000 AUTOMATIC STRETCH WRAPPER -- Production Speed; Up to 45 Loads Per Hour -- Maximum Load Size 48" W x 54" Lx 92" Height -- Minimum Load Size; 36" W x 36" L x 24" Height -- Maximum Load Weight 4000 Lbs -- Top Sheet Dispenser 60" x 36" -- top sheet dispenser one wire guard may be missing -- (1) infeed and ...more
Ex-Factory has 10 more
listings in Wrapping Machines (including Shrink Wrappers).
