go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Erie Machine Tool Int'l Equipment

1426 W 45th St.
Erie, PA 16509
Silver Level Dealer
Surplus Record Dealer Since 2010

About

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning. Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes. Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

Products & Services

  • Boring Mills, Horz. & Vert.
  • Brakes, Press
  • CNC Machinery
  • Coordinate Measuring Machines
  • Fabricating Machinery
  • Planers/Planer Mills
  • Presses
  • Rolls

Associations & Affiliations

19 listings in 15 categories

4-Roll Plate Bending Machines

1 Result

307" x 1/4" SBFM FCC #4R-SBS-7508, hydraulic 3-rollers plate bending machine

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Sbfm
Model: 4R-SBS 7508
Year: 2023
4R SBS 7508 HYDRAULIC 4 ROLLERS PLATE BENDING MACHINE, Technical :, Useful working length :7600 mmDiameter of top cylinder :Ø420 mmDiameter of bottom cylinder :Ø390 mmDiameter of side cylinder :Ø340 mmMotor power :37 kWRolling speed :4 m/min.Weight (approx.) :34000 kgOverall dims (L-W-H) ...more

8" x 8" x .8" Tauring #Alpha-200, CNC I-beam & angle bending roll, Alpha200CNCi, HE Device, 3 driven rolls, 24.1 HP, 2015

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Tauring
Model: ALPHA-200
Year: 2015
8" x 8" x.800" Tauring #Alpha-200, CNC I-Beam & Angle Bending Roll, Alpha200CNCi, HE Device, 3 driven rolls, 24.1 HP, 2015, Tauring Alpha 200CNC Angle Bending Roll, (Preliminary), Round Tube: 10.75" x 0.5" / Min. Radius: 87", Square Tube: 10" x 10" x.40" / Min. Radius: 80", Flat Bar (Hard Way): 10" x 2.3 / Min. ...more

7-87 x 14-17 or 200mm x 360mm Vertical Boring Mill Jaws

Category: Boring Jaws
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Year: 2023
We make to Order any size requirements.

4" Shibaura #BT-10A, Horizontal Table Type Boring Mill, pendant control, 15 HP, 1973

Seller: Erie Machine Tool Int'l Equipment
Location: Toledo, OH
Mfr: Shibaura
Model: BT-10A
Year: 1973
TOSHIBA SHIBAURA BT-10A, Type: Boring Mills, Horizontal, Table Type, Model: BT-10A, Brand: TOSHIBA SHIBAURA, Serial # 6200, Condition: Used, Year: 1971, SERIAL.: 6200, MODEL.: BT-10A, SPINDLE DIAMETER.: 4", VERTICAL TRAVEL.: 48", TABLE CROSS TRAVEL.: 55", TABLE IN/OUT TRAVEL.: 36", SPINDLE TRAVEL.: 26", TABLE SIZE.: ...more

FCC-SBFM #FCC-BSPM-SC 200-2500 & 3500mm 200 ton hydraulic dishing press & manipulator

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Fcc-Sbfm
Model: FCC-BSPM-SC 200-2500
Year: 2023
BSPM-SC 200-2500 Hydraulic Dishing Press, for oval and round dished ends Brand New 2023, Operation: Semi automatic manipulator controlled for round dished ends., Diameter of blank max Ø 2500 mm / min Ø600 mm, Thickness capacity: max 16 mm MS-235 grade plates, Stroke : 500 mm, Including with 1 press mould ...more

FCC-BSPM #300-5000 dishing press & manipulator, 300 ton x 5000mm (196.8" )

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Fcc
Model: 300-5000
300 TON X 5000mm (196.8") FCC-BSPM-C 300-5000 Automatic Hydraulic Dishing Press NEW and Made to Order, NEW 300 TON X 5000mm (196.8") FCC-BSPM-C 300-5000 Automatic Hydraulic Dishing Press, For oval and round dished ends, Automatic with manipulator system., Pressing Force: 300 ton, Diameter of blank max ‹“ ...more

Excavators

1 Result

IHI #35-J-Mini, excavator, diesel

Category: Excavators
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Ihi
Model: 35-J-MINI
IHI 35 J Mini Excavator, Diesel with 30,149 hours., Starts quickly and runs smooth., Within 30 seconds you have clean clear exhaust., NOTE this has a PSM hydraulic thumb with 3 prongs., This is mounted with hydraulic plate on excavator arm, This gives a very good range of extra motion /grasping., ( Most thumbs on ...more

Flangers

2 Results

1" x 196.8" (25mm x 5000mm) SBFM #FCC-BSMD-C5025, hydraulic centerless automatic flanging machine

Category: Flangers
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Sbfm
Model: FCC-BSMD-C 5025
Year: 2023
NEW 1” X 196.8” (25mm x 5000mm) FCC-BSMD-C 5025 Hydraulic Centerless Automatic Flanging Machine, For Round Dished Ends without center hole., Thickness: max 25 mm MS / S235 grade plates, Diameter of dished end: max Ø5000 mm/min 500 mm, Including with 2 knuckles/flanging tools as per your size ...more

1.77" x 354.3" (45mm x 9000mm) Pyramid hydraulic flanger

Category: Flangers
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Pyramid
354.3” x 1.77” (9000mm x 45mm) Pyramid Hydraulic Flanger, 9000mm (354.3”) Blank Diameter Maximum, 45mm Thickness Capacity (1.77”), The following table has the knuckle radius sizes available for this machine:, R50, R150, R250, R350, R550, R750, R100, R400, R450, R500, R600, R650, R700, R800 ...more

300 Ton, Hydraulic Bulldozer Press, 9" ram diameter, 5 HP, 1750 RPM, 52" x 33" x 30" table

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
300 Ton Bulldozer Type Horizontal Hydraulic Press, 36" Cylinder Stroke Capacity, Horizontal portion of the table is 52" x 33" x 30" H., Vert. Ram dimensions are 30" x 40" x 30"H with (4) "T" Slots., Diameter of Ram: 9" (Estimated 300 Ton Capacity), 5HP 1750 RPM Hydraulic Pump Motor, This bulldozer press was an ...more

Mori Seiki #NHX-4000, Horizontal Machining Center, 2013

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Mori Seiki
Model: NHX-4000
Year: 2013
See attached.pdf.

Hydraulic Press Brakes

3 Results

400 Ton, Pacific #K400-14, hydraulic press brake, 14' overall, 128" between housing, 12" stroke, 1973

Seller: Erie Machine Tool Int'l Equipment
Location: Cincinnati, OH
Mfr: Pacific
Model: K400-14
Year: 1973
400 Ton x 14’ Pacific Model K400-14 Hydraulic Press Brake 1973, S/N 5336, YOM EST. 1973, Capacity.400 ton, Bending Capacity.1/2" x 12 ft,.7/16" x 14 ft, Overall Length of Bed.14 ft, Overall Length of Ram.14 ft, Overall Width of Bed.10", Overall Width of Ram.14 ft, Distance Between Housings.128", Stroke.12", Die ...more

1499 -1500 Ton, Cincinnati #1500H, hydraulic, 36' overall (11, 000mm), 269" between housing (6833mm), rebuilt cylinders 1999

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Cincinnati
Model: 1500H
36' (11,000mm) x 1500 Ton Cincinnati 1500H Hydraulic Press Brake, 269"/22'5" (6833mm) Between Housings, s/n 35300, 36’0" O.A.L. was extended from 30’-10M, We have the factory prints on this machine, It’s fabrication, it was done properly., 22’-5" / 6.82M Between Housings, 18" STROKE- ...more

1500 Ton, Accurpress #7150016, CNC hydraulic press brake, ETS 3000 ctr, 20' overall, 153" between housing, 2015

Seller: Erie Machine Tool Int'l Equipment
Location: Abbotsford, BC
Mfr: Accurpress
Model: 7150016
Year: 2015
We have this 1500 Ton x 20' Accurpress manufactured in 2015 for sale Immediately. 1500 Ton x 20' Accurpress CNC Hydraulic Press Brake 2015 Rocker Arm Style 1500-ton 16 foot with 2’ x 2’ horns to extend the pressing area several years ago. Product Capacity: 1500 ton 20' Bed with increased opening height of ...more

Industrial Robots

1 Result

Yaskawa, VMSK-18-AW-2890-Rev 2 Welding Cell, 2014 / 2015

Seller: Erie Machine Tool Int'l Equipment
Location: Abbotsford, BC
Mfr: Yaskawa
Model: VMSK-18-AW-2890-REV 2 WELDING CELL
Yaskawa VMSK-18-AW-2890-Rev 2 Welding Cell 2014/2015, Manufactured by Yaskawa Canada Inc..

Molding Compression Hydraulic Presses

1 Result

100 Ton, Italpresse #PM/DE/1, hydraulic cold compression press, never used (3 available)

Seller: Erie Machine Tool Int'l Equipment
Location: Toledo, OH
Mfr: Italpresse
Model: PM/DE/1
Year: 2008
100 TON ITALPRESSE PM/DE/1 HYDRAULIC COLD COMPRESSION PRESS. (NEVER USED), MODEL.: PM/DE/1, YEAR NEW.: 2008, TONNAGE.: 100, STROKE.: 16", DAYLIGHT OPENING.: 3.9" - 19.6", BOLSTER DIMENSIONS.: 98" X 51", RAM DIMENSIONS.: 98" X 51", DISTANCE BETWEEN UPRIGHTS.: 24", LOADING HEIGHT.: 36", SPEED ADJUST.: YES, RACK AND ...more

Charmilles #Roboform-350, 13.78x9.84x11.81" trvl, 19.59x16.75" tbl, 30.71x20.87x11.81"workpiece, 2004

Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Charmilles
Model: ROBOFORM-350
Year: 2004
Charmilles Roboform 350 CNC EDM Die Sinker 2004, Dimensions (*) in 74.80 x 66.54 x 99.29, Total weight (without dielectric) lbs 6200, X, Y, Z travel in 13.78 x 9.84 x 11.81, Work area, Tank dimensions (*) in 31.50 x 21.65 x 14.57, Min./max. dielectric level in 3.94/12.80 programmable, Table dimensions (**) in 19.69 x ...more

157" x 1" (4000mm x 25mm) Leifeld #VDM4000E, combo vertical spinning lathe & flanger

Category: Spinning Lathes
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Leifeld
Model: VDM4000E
4000mm x 25mm (157.480" x 1") Capacity Leifeld VDM 4000 E Combination Vertical Spinning Lathe & Flanger, VERTICAL HEAVY DUTY SPINNING / DISHING MACHINE, St. no. : 6212, Make : LEIFELD, Type : VDM 4000 E, Machine no. : 15.307/1/2, Component diameter max. : 3.900mm, Spinning, Steel bottoms : 5 - 25mm, Alu. bottoms : ...more

Universal Cylindrical Grinding Machines

1 Result

14" x 96" Cincinnati universal cylindrical grinder, 30x3" x12" grinding wheel, automatic infeed

Seller: Erie Machine Tool Int'l Equipment
Location: Toledo, OH
Mfr: Cincinnati
Model: 14 X 96
14" X 96" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER, Type: Grinders, Cylindrical, Universal, Brand: Cincinnati, Condition: Used, MAXIMUM SWING OVER TABLE. 14", MAXIMUM CENTER DISTANCE. 96", GRINDING WHEEL SIZE. 30" X 3" X 12", GRINDING WHEEL SPEED. 830 RPM, WORKHEAD SPEEDS. 62 TO 263 RPM, TABLE TRAVERSE SPEEDS. 3 TO ...more