Doug Beat Co The
Contact
About
Doug Beat Company is a wholesale seller of new & used industrial electrical equipment with a huge selection of rebuilt AC & DC motors & transformers. Warehouse: 2555 Harleau Pl.,Toledo, Ohio 43610; (419) 241-3313Products & Services
- Gear Reducers
- Motor Controls, Starters & MCC's
- Motors, A.C.
- Motors, D.C.
- Transformers
Associations & Affiliations
60 Hz Single Phase Transformers
10 KVA 240/480 Primary, 120/240 Secondary, Allis-Chalmers, dry, Nema #1
15 KVA 240/480 Primary, 120/240 Secondary, General Electric, dry, Nema 1
25 KVA 240/480 Primary, 120/240 Secondary, General Electric, dry, Nema 1
25 KVA 4800/8320Y Primary, 120/240 Secondary, Square D, oil, padmount, taps
37.5 KVA 240X480 Primary, 120X240 Secondary, Olsun, potted, outdoor, Nema 3R, single phase (2 available)
Doug Beat Co The has 22 more
listings in 60 Hz Single Phase Transformers.
60 Hz Synchronous Electric Motors
150 HP 1800 RPM Westinghouse, Frame 870S, DPSB, 220/440 Volts
200 HP 400 RPM Westinghouse, Drip-Proof Ball Bearing, 440 Volts
200 HP 450 RPM General Electric, Frame 7653, DP SB, 440 Volts
200 HP 720 RPM Ideal, Frame 8411/ 801, Drip-Proof Ball Bearing, 440 Volts (3 available)
250 HP 400 RPM Electric Machinery, Frame 4500, DP SB, 440 Volts
Doug Beat Co The has 36 more
listings in 60 Hz Synchronous Electric Motors.
60 Hz Three Phase Electric Brake Motors
7.5 HP 3525 RPM Baldor, Frame 213TC, TEFC, w/feet, unused, 230/460 Volts (2 available)
10 HP 1170 RPM Delco, Frame 284U, TEFC, 460 Volts (2 available)
15 HP 1765 RPM Delco, Frame 284U, TEFC, 460 Volts
15/7.5 HP 3600/1800 RPM Sterling, Frame 324U, TEFC, 50 ft.lbs, 460 Volts (2 available)
20 HP 1175 RPM General Electric, Frame 286T, TEFCBB, 105 ft.lb.brake, 230/460 Volts
Doug Beat Co The has 3 more
listings in 60 Hz Three Phase Electric Brake Motors.
60 Hz Three Phase Transformers
6 KVA 480 Delta Primary, 208Y/120 Secondary, General Electric, dry, taps, wall mntd.(4 available)
6 KVA 480 Delta Primary, 240 Delta Secondary, General Electric, dry, taps, wall mntd.(2 available)
10 KVA 208Y Primary, 208Y/120 Secondary, control power, constant volt, dry, Nema I
15 KVA 480 Primary, 208/120 Secondary, General Electric, dry, wall mount
20 KVA 460 Delta Primary, 230Y/133 Secondary, Hevi-Duty, dry taps (3 available)
Doug Beat Co The has 161 more
listings in 60 Hz Three Phase Transformers.
2 HP 690 RPM Louis Allis, Frame 215YZ, dbl.shaft & flange, 230/460 Volts (2 available)
2.5 HP 1160 RPM Sweco, Frame 213T, Shaker-Duty-Motors, TENV, 230/460 Volts (4 available)
3 HP 880 RPM Louis Allis, Frame 256TC, dbl.shaft & flange, 230/460 Volts
3 HP 1735 RPM Westinghouse, Frame 215TCZ, double shaft & flange, 230/460 Volts (2 available)
5 HP 705 RPM Louis Allis, Frame 284YZ, dbl.shaft & flange, 230/460 Volts (4 available)
Doug Beat Co The has 7 more
listings in 60 Hz Vibratory Motors.
60 Hz Wound Rotor (slip ring-rotor) Motors
5 HP 1700 RPM Howell, Frame 254, Drip-Proof Ball Bearing, 200/220/440 Volts
7 HP 1150 RPM Westinghouse, Frame 256U, Drip-Proof Ball Bearing, 220/440 Volts
10 HP 1800 RPM Reuland, Frame 286U, Drip-Proof Ball Bearing, 230/460 Volts
15 HP 1725 RPM Howell, Frame 326, Drip-Proof Ball Bearing, 208/220/440 Volts
20 HP 1140 RPM Allis-Chalmers, Frame 365, Drip-Proof Ball Bearing, 220/440 Volts
Doug Beat Co The has 77 more
listings in 60 Hz Wound Rotor (slip ring-rotor) Motors.
3 HP 1 RPM Sumitomo Par.Shaft, Brake, TEFC, SM-Cyclo, 230/460 Volts
3 HP 25 RPM U.S. Motors, Frame 184TC-24, TEFC, in-line par, 230/460 Volts (3 available)
3 HP 100 RPM U.S. Motors, Frame 182T-33-30, TEFC BB, par, 230/460 Volts
3 HP 125 RPM Louis Allis, Frame 213, TEFC BB, par, 220/440 Volts (2 available)
5 HP 3 RPM Sumitomo Par.Shaft with Brake, TENV, 460 Volts (9 available)
Doug Beat Co The has 22 more
listings in AC Gear Motors.
125 KW, 1200 RPM, Columbia, Frame 3214, Drip-Proof Ball Bearing, 2-bearing, 208Y/120
300 KVA, 327 RPM, General Electric alternator, 125 VDC excitation .8pf.
400 KW, 1200 RPM, Delco, 10-leads, 2-bearing-ball.dbl.-shaft, 208/240/480 VAC
700 KW, 1200 RPM, General Electric, Frame 8309, DPSB, brushless, 3/60/480 VAC
800 KW, 1800 RPM, Stamford, Frame HC, single bearing, 277 VAC
Doug Beat Co The has 3 more
listings in AC Generator Ends.
250 HP Toshiba, HX7+C426KCB, VFD drives, 460 VAC Input, 0-90 Hz output, w/circuit breaker (4 available)
300/350 HP Baldor, VE0709B00, VFD drives, 460 VAC input, 0-1000 Hertz (2 available)
C-flange Mounted Squirrel Cage Motors
60 HP 1780 RPM Lincoln, Frame 364TSC, TEFC, 230/460 Volts (10 available)
200 HP 1775 RPM Delco, Frame M505CY, TEFCBB, dbl.shaft, dbl.C-face, 460 Volts
200 HP 3560 RPM Baldor, Frame 444TSC/445TSC, TEFC BB, w/ft, 460 Volts (9 available)
600 GPM @ 100' TDH, Allis-Chalmers, 4x3x11, w/75 HP @ 3600 RPM motor (8 available)
Chain Hoists, Monorail and Trolley Cranes
4 Ton, P & H, electric hoist, pendant, with trolley, 22'/min.Lift, 460 VAC
D-flange Mounted Squirrel Cage Motors
50 HP 1765 RPM U.S. Motors, Frame 326TD, Drip-Proof Ball Bearing, 230/460 Volts (3 available)
50 HP 1775 RPM Delco, Frame 365UD, TEFC BB, 230/460 Volts (4 available)
50 HP 3560 RPM General Electric, Frame 324TSD, Drip-Proof Ball Bearing, w/feet, 230/460 Volts
100 HP 1785 RPM Delco, Frame 445USD, TEFC, w/feet, 230/460 Volts
200 HP 3570 RPM Toshiba, Frame 444TSD, Drip-Proof Ball Bearing, 6-leads, Y-D, 460 VAC
3 HP 750 RPM P & H, Frame CP11, TENV, Series-Wound, dbl-shaft, 230 Volts (4 available)
4.25/6 HP 6900/715 RPM Westinghouse, K-2, TENV BB, series, w/brake, 230 Volts (2 available)
5 HP 875 RPM General Electric, Frame CO1823AA, TENV, Series-Wound, 230 Volts
5 HP 1600 RPM Westinghouse, fr.216A, TENV, Series wound, dbl-shaft, 240 Volts (3 available)
7.5 HP 275 RPM General Electric, MD606AEL, shunt wound, TENV, single tapered shaft, 230 Volts (2 available)
Doug Beat Co The has 25 more
listings in DC Crane and Mill Motors.
17 KW, 1750 RPM, Westinghouse, Frame 326AS, Drip-Proof Ball Bearing, 125 VDC (4 available)
25 KW, 1750 RPM, General Electric, Frame 327AT, DPFG, 250 VDC (2 available)
30 KW, 1750 RPM, Crocker-Wheeler, Frame EH, Drip-Proof Ball Bearing, 250 VDC
40 KW, 1750 RPM, General Electric, Frame 366AT, DPFG, 250 VDC (2 available)
60 KW, 1200 RPM, General Electric, Frame 506AT, 75 VDC
Doug Beat Co The has 13 more
listings in DC Generator Ends.
DC Motors Electrical, 115-225 Volts
5 HP 1750 RPM Baldor, Frame 256UC, TEFC, 180 VA (2 available)
7.5 HP 1750 RPM Westinghouse, Frame 286APH, VSS, shunt, 125 VA
7.5 HP 2500 RPM General Electric, Frame 258AT, TEFC, 180 VA (3 available)
250 HP 750/1610 RPM ABB, Frame 280L/4413AT, DPFV, 180 VF, 225 VA (2 available)
DC Motors Electrical, 230-250 Volts
3 HP 1750 RPM Reliance, Frame 225, Drip-Proof Ball Bearing, 230 VA
3 HP 1750/2625 RPM Reliance, Frame 254, Drip-Proof Ball Bearing, 230 VA
5/7.5 HP 400/2400 RPM Allis-Chalmers, Frame 366AD/EBD100, Drip-Proof Ball Bearing, no feet, 230 VA(3 available)
5 HP 500/2000 RPM General Electric, Frame 366A, Drip-Proof Ball Bearing, 240 VA
5 HP 850/1750 RPM General Electric, Frame 284A, TEFC BB, 240 VA (4 available)
Doug Beat Co The has 158 more
listings in DC Motors Electrical, 230-250 Volts.
DC Motors Electrical, 255-460 Volts
15 HP 1750 RPM Mawdsley, Frame 160, DPFV, 420 VA
15 HP 2000 RPM Thrige Scott, Frame LAK160, DPFV, 460 VA (2 available)
50 HP 2600 RPM AEG, Frame 180S, DPFV, 460 VA
61 HP 2500 RPM Siemens, Frame 200/326ATZ, DPBV, 400 VA (4 available)
68 HP 1800/2500 RPM Reliance, Frame 180L, DPFV, blower, 400 VA (5 available)
Doug Beat Co The has 5 more
listings in DC Motors Electrical, 255-460 Volts.
DC Motors Electrical, 475-900 Volts
5 HP 1150/1750 RPM Westinghouse, Frame 286A, Drip-Proof Ball Bearing, 500 VA (6 available)
5/7.5 HP 1750/1950 RPM Reliance, TENV, 500 VA (3 available)
5 HP 1750/2300 RPM General Electric, Frame 259AT, TENV, 500 VA (2 available)
7 HP 1750 RPM General Electric, Frame 218AT, DP FG, 500 VA (2 available)
7 HP 1750 RPM Reliance, Frame 1811ATZ, Drip-Proof Ball Bearing, 500 VA
Doug Beat Co The has 293 more
listings in DC Motors Electrical, 475-900 Volts.
10 HP 1743 RPM Reuland, Frame 324Z, TENV, dbl.shft, 30min., 230/240 Volts (10 available)
15 HP 1750 RPM Reuland, Frame 326Z, TENV, dbl.shft, 30min., 230/460 Volts (10 available)
25 HP 820 RPM General Electric, Frame 365TZ, TENV, dbl.shaft, w/brake, 230/460 Volts (10 available)
60 HP 1080 RPM General Electric, Frame 8143Z, Drip-Proof Ball Bearing, 460 Volts AC, (2 available)
125 HP 1670 RPM General Electric, Frame 449TS, TENV, 30Min.Duty, 440 ft.lb.Stearns brake, 460 Volts (2 available)
Doug Beat Co The has 4 more
listings in Design D Hoist-Duty Motors.
Explosion Proof AC Electric Motors
5 HP 1675 RPM Baldor, Frame 213DZ, XPTEFC, VSS, 25 ft.lb.brake, 230/460 Volts
25 HP 875 RPM General Electric, Frame 445, TEFC BB explosion proof, 220/440 Volts (2 available)
25/12.5 HP 1750/865 RPM Toshiba, Frame 326T, explosion proof TEFC BB, 460 V.AC
50/25 HP 1760/880 RPM Allis-Chalmers, Frame 405U, explosion proof TEFC BB, 440 V.AC
75 HP 1800 RPM Westinghouse, Frame 444U, TEFC BB explosion proof, 220/440 Volts
Doug Beat Co The has 12 more
listings in Explosion Proof AC Electric Motors.
Gear Increasers, Without Driving Unit
2250 HP @ 1780 RPM input, 6119 RPM output, Philadelphia, 3.43:1 ratio, size 115MHS, 1.15 SF (2 available)
Gear Reducers, With Driving Unit
20 HP, 5-20 RPM, Alispeed, C-Flow-flat, with mechanical hand crank, TEFC, 460 Volts
50 HP, 56 RPM, U.S. Motors vertical gearmotor, TVC-GMV, 326VP-65B, 230/460 Volts (4 available)
50 HP, 1780/24 RPM, Sew right-angle, 326tc, 230/460vac, TEFC, 73.30 :1 ratio, rebuilt
Gearboxes (Gear Reducers - No Driving Unit)
10 HP @ 1750 RPM, Falk, Size 4EZ, w/scoop mount, 13.59:1 ratio, par (2 available)
20 HP @ 1450 RPM, Link-Belt, Size BT-4200-62, 264.00 :1 ratio, offset par (2 available)
48.1 HP @ 1750 RPM, Philadelphia In-Line-Par., 56.42:1 ratio, 30 rpm output, size 9, (2 available)
75 HP @ 1150 RPM, Western, 11.14 :1 ratio, off set par, size D58B
100 HP, Falk #7CBA3, right-angle-double-shaft, 2.46:1 ratio (10 available)
Doug Beat Co The has 8 more
listings in Gearboxes (Gear Reducers - No Driving Unit).
Hi-Cycle Motor Generator (MG) Sets
50 KW, 10 KC output @ 220/440 VAC, Gen.Elec., 3600 RPM, 220/440 Volts, 75 HP, AC
Insulated Case and Molded Case Circuit Breakers
1200 Amps, Westinghouse, HNC31200F, 600 VAC (3 available)
2000 Amps, Cutler-Hammer, RD320T77W, Digitrip, LSI, 600 VAC (3 available)
60 HP 0/1800 RPM Marathon, Frame 364TZ, tefc, dbl.shaft, 230/460 Volts (10 available)
300 HP 1735/2300 RPM Reliance, Frame L3698, DPFV, 460 Volts
Load Break Switches and Load Interrupter Switchgear
200 Amp. S & C Electric Co, MS-10, 15KV, Nema 1, with 200 amp Fused Switch (7 available)
Low Voltage Air Circuit Breakers
800 Amps, Westinghouse, DS-206S, with 600 amp sensors
1600 Amps, Westinghouse, DS-416, MDO, unused (4 available)
Motor Generator Sets - D.C. Output, A.C. Drive
15 KW, 125 VDC, General Electric, 1800 RPM, Drip-Proof Ball Bearing, 220/440 Volts (3 available)
230 VDC, Reliance, B10VS, 2 bearing, 220/440 Volts
240 VDC, Reliance, D5VS, 2 bearing, 3500 RPM, 208/230/460/575 Volts (4 available)
240 VDC, Reliance, D3VS & C3VS, 2 bearing, 3500 RPM, 208/230/460/575 Volts (4 available)
240 VDC, Reliance, C15VS, 2 bearing, 220/440 Volts
Doug Beat Co The has 12 more
listings in Motor Generator Sets - D.C. Output, A.C. Drive.
Motor Test Systems and Dynamometers
125 HP, 3900/10000 RPM, Dynamatic Pro #022957, Eddy-Current, water-cooled
175 HP, 1650/6000 RPM, Dynamatic #1014 DC-EC, Eddy-Current, water-cooled (12 available)
200 HP, 1800/6000 RPM, Dynamatic #AD-8100, Eddy-Current, 45 VDC, water-cooled (2 available)
500 HP, 1500/3000 RPM, General Electric, DYC243, 500 VDC at 700 amp
1250 HP, 1800 RPM, Dynamatic, WCS-2252, water cooled (2 available)
3/1 HP 1800/600 RPM Reuland, Frame 215, TENV, 460 V.AC (2 available)
3/1.5 HP 1800/900 RPM Reuland, Frame 215, Drip-Proof Ball Bearing, 220 V.AC (2 available)
3.75/.75 HP 1740/335 RPM General Electric, Frame 284U, TENV, design C, 440 Volts (2 available)
10/2.5 HP 1175/585 RPM Delco, Frame 286U, TEFC BB, 460 VAC
10/5 HP 1770/880 RPM Westinghouse, Frame 254T, TEFC BB, 460 Volts (3 available)
Doug Beat Co The has 50 more
listings in Multi-Speed Motors.
Reduced Voltage Motor Controls And Starters
200 HP Westinghouse, Size 5, combination, 120 Volts control, Nema 12 (5 available)
Right Angle Gear Increasers and Reducers
291 HP @ 1750 RPM, Amarillo #1814, 19.10 :1 ratio, 2.0 service factor, Right-Angle-Up
700/400 HP @ 1410 RPM, Flender #KZNS450, 30.84:1 ratio, Right Angle Up
Silicon Rectifiers, Bus Supply (Constant Voltage)
9 KW, 125 VDC @ 72 Amps, Westinghouse wall-mount, input 460 VAC 3-phase
10 KW, 90 VDC, Allis-Chalmers, 440 VAC input
17 KW, 125 VDC, 136 amps, Westinghouse / TIC, Nema 1, 460 VAC input (8 available)
50 KW, 125 VDC, Westinghouse, input, 3/60/460 VAC
75 KW, 125 VDC @ 600 amps, Magnetics, 460 VAC input
Doug Beat Co The has 1 more
listing in Silicon Rectifiers, Bus Supply (Constant Voltage).
50 KVAR General Electric, 1-bushing, 13280 VAC (20 available)
50 KVAR General Electric, 3-bushing single-phase, 575 Volts
50 KVAR General Electric, 2-bushing, 2400 VAC (50 available)
100 KVAR General Electric, 2-bushing, 2400 VAC (100 available)
150 KVAR General Electric, 2-bushing, 2400 VAC (100 available)
Doug Beat Co The has 13 more
listings in Single Phase Capacitors.
Single Phase Voltage Regulators
1 KVA Sola, 120/240/480 Volts input, 120/240 Volts output, wall mount (35 available)
3 KVA Sola, 120/240/480 Volts Pri. 120/240 Volts Sec., wall-mnt, Cat.#23-23-230 (41 available)
Slip Ring Crane and Hoist Motors
1.5 HP 1120 RPM Westinghouse, Frame 215TX, TENV, dbl.shaft, w/brake, 230/460 Volts (2 available)
2 HP 1110 RPM General Electric, Frame 225, TENV BB, 220/440 Volts (2 available)
2 HP 1125 RPM General Electric, Frame 213TZ, TENV, dbl.shaft, 230/460 Volts
2 HP 1600 RPM P & H, Frame HEW-L213, TENV, w/brake, 2330/460 Volts
2 HP 1800 RPM Reuland, Frame 184, TENV, 230/460 Volts (3 available)
Doug Beat Co The has 134 more
listings in Slip Ring Crane and Hoist Motors.
Squirrel Cage AC Electric Motor
2.5 HP 1160 RPM Sweco, Frame 213T, Shaker-Duty-Motors, TENV, 230/460 Volts (4 available)
15 HP 880 RPM General Electric, Frame 365, TEFC BB, Drip-Proof Ball Bearing, 220/440 Volts (4 available)
20 HP 439 RPM Brook Crompton, Frame 404T, TEFC, Cast-Iron, 460 Volts
20 HP 690 RPM Wagner, Frame 444, TEFC BB, 220/440 Volts
20 HP 715 RPM General Electric, Frame 364T & 405, TEFC BB, 230/460 Volts (6 available)
Doug Beat Co The has 667 more
listings in Squirrel Cage AC Electric Motor.
Squirrel Cage, Punch Press, Constant Duty Electric Motors
3 HP 1665 RPM Weg, Frame 184T, TEFC, 208/230/460 Volts
5 HP 1090 RPM Westinghouse, Frame 254T, TEFC BB, 230/460 Volts (3 available)
5 HP 1665 RPM Weg, Frame 184T, TEFC, 208/230/460 Volts (2 available)
7.5 HP 1040 RPM General Electric, Frame 284U, TEFC BB, 220/440 Volts
7.5 HP 1070 RPM Reliance, Frame 215TC, Drip-Proof Ball Bearing, no feet, 230/460 Volts (2 available)
Doug Beat Co The has 139 more
listings in Squirrel Cage, Punch Press, Constant Duty Electric Motors.
100 KVAR General Electric, 3-bushing, 600 Volts
200 KVAR ABB, 13280 Volts, single phase, 110 KV, single bushing (82 available)
450 KVAR Automatic Power Factor Correction, 480 Volts, Square-D Reactivar (2 available)
600 KVAR ABB, 12470 VAC (14 available)
Variable Speed Fluid Couplings
300 HP, 50/1800 RPM, Nelson #PM4-435AA1, fluid couplings, double-shaft (6 available)
No. LCPD120 Press drive, 1200 ft./lbs., Dynamatic, 230 VDC coil
Variable Speed Motors (Adjustable Speed)
3 HP 0/1100 RPM Dynamatic, ACM9033,45 vdc cl, 230/460 Volts (5 available)
3 HP 0/1575 RPM Dynamatic, AS-140,90 vdc clutch, 230/460 Volts
3 HP 0/3350 RPM Dynamatic, ACM9032,45VDC cl, br, 230/460 Volts
3 HP 50/1680 RPM Dynamatic, AC-184,45 & 90VDC cl, 230/460 Volts (8 available)
3 HP 100/1670 RPM Dynamatic, ACM-903/4,110vdc cl, 220/440 Volts (5 available)
Doug Beat Co The has 38 more
listings in Variable Speed Motors (Adjustable Speed).
7 HP 1745 RPM General Electric, Frame 213TP10, Drip-Proof Ball Bearing, VHS, vertical hollow shaft, 230/460 Volts (4 available)
10 HP 1155 RPM U.S. Motors, Frame 256TCV, TEFC BB, VSS, vertical solid shaft, 230/460 Volts
15 HP 1760 RPM Baldor, Frame 254TCZ, VSS, vertical solid shaft, TEFC, 230/460 Volts (15 available)
20/10 HP 900/450 RPM Louis Allis, Frame 504P, TEFC BB, extractor duty, 440 Volts
20 HP 1180 RPM U.S. Motors, Frame 286TP-10, TEFC, VHS, vert. hollow shaft, NRR, 230/460 V. (2)
Doug Beat Co The has 145 more
listings in Vertical Pump Motors.