D'Angelo International
Bellingham, WA 98226
Silver Level Dealer
Surplus Record Dealer Since 2011
Contact
About
D'Angelo International is a company comprised of a professional team with three generations of knowledge. Our extensive experience in the minerals and mining industry provides us the ability to offer top-quality new, surplus, rebuilt, or used mining and mineral processing equipment. We are a worldwide seller of reconditioned and refurbished equipment. Our team has the proficiency and skill-set to source and supply most equipment required for mineral processing, and related industries like pulp and paper milling, water treatment, and aggregate production.We believe in providing our customers with informative, reputable, and friendly service while promoting an environmentally-conscious mining standard. We have a deep-rooted respect for Earth's natural resources and spaces. We strive to lead our sustainable vision by forming worldwide partnerships and presenting cost and time effective options with our inventory of new, rebuilt, and used mining and mineral processing equipment.
Products & Services
- Chemical, Petroleum & Gas Processing Equipment
- Motors, A.C.
- Motors, D.C.
Associations & Affiliations
224 listings in 47 categories
60 Hz Synchronous Electric Motors
16 Results
200 HP 180 RPM Synchronous Motor with starter, 460 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Synchronous motor and starter used to power a 7 x 10 ft Marcy ball mill, Motor:, - 200 HP (150 kW), - 180 RPM, - 460 V, Starter:, - Weaver Electric Custom Control Synchronous Starter, - HP 300-200, - Voltage 575-460, - Excitation 230V, - DC, - 25A.
250 HP 1180 RPM General Electric, Frame B7112, 460 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: B7112
, - 250 HP (185 kW), - 460 V, - 60 Hz, - 3 Ph, - 80 C temperature rise, - 310 Amp, - 1,180 RPM, - B7112 frame, - Made in USA, - Megger tested 03/2013, - Cleaned and painted.
1250 HP 200 RPM General Electric, Frame 6524L, TS, 0.8 PF, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6524L
- 1250 HP, - 200 RPM, - Power factor: 0.8, - Type TS, - 4000 Volt, - 1250 Kva, - 180 Armature amps, - 85 Field amps, - 125 Excitation volts, - 3 Ph/60 Hz, - 6524L frame, - Continuous duty, - Made by Electric in USA, Spare parts (additional cost):, - Starter..
1250 HP 200 RPM General Electric #6524L, Frame 6524L, 1.0 PF, 4000V., 1978
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6524L
Year: 1978
1250hp (930 kW) Electric Synchronous Motor, - 200rpm, 4000V, - 250 excitation volts, 144 amps armature, field 35, PF 1.0, Frame 6524L, - Manufactured USA 1978, Model# 6524L, - Height to CL of shaft from frame bottom: 35in, - Outside length of motor frame: 68in, - Overall length of motor (shaft length): 98in, - Outside ...more
1250 HP 240 RPM Fairbanks-Morse, Frame 987-21, TZO, 90/80 C, 2300/4160 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Fairbanks-Morse
Frame: 987-21
1,250 HP (930 kW) 240 RPM Fairbanks Morse, - Colt Industries Synchronous Motor, - Field amps 84, - Field volts 250, - Equipment # 24-1511-00, - Frame 987-21, - Type TZO, - 3 Ph, - 60 Hz, - 2,300/4,160 volt, - 306/177 amp, - Service Factor 1, - Spare stator, - New shaft work, - This motor has been refurbished ...more
1250 HP 240 RPM General Electric, Frame 6425K, electrically OK, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6425K
- Two matching motors available, - EOK, - Manufactured by GE, rebuilt by Hunt Company LLC, - 1,250 HP (930 kW), - 240 RPM, - 6425K frame, - 60 Hz 3 Ph, - 4,000 Volt, - 161 amp, - Class B insulation, - Mounted on a steel base frame.
1500 HP 240 RPM Ideal, Frame M-7, electrically OK, 1.0 PF, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ideal
Frame: M-7
4 units available, - 1,500 HP, - 240 RPM, - 4,000 Volt, - 3 ph, 60 Hz, - Frame M-7, - Type SM, - 1.0 P.F., - EOK, - Clutch-compatible shaft, - Made in USA, - Removed and in storage, - Immediately available.
1500 HP 257 RPM Allis-Chalmers, BB, Continuous Duty, 2300 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
1500 HP (1100 kW) Allis Chalmers Synchronous Motor, - 257 RPM, 2300 V, 371 Amps, 3 Phase, 60 Cycle, - Continuous Duty, KW 80% P.F., Continuous 100% Load, - Stator 50C Rotor 60C, Excitation Volts 125, 177 Amps @ Rated Load, - Babbitt Bearings.
2000 HP 277 RPM Allis-Chalmers, 491 Amps, 80 Amp Stator, 80 Amp Rotor, 2300 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 2000 HP (1500 kW), - 2300 Volts, - 3 Phase, 60 Hz, - 277 RPM, - 491 Amps, - 80 Amp Stator, – 125 Volts/107 Amps, - 80 Amp Rotor, - Made in USA by Allis Chalmers, - Currently in storage, available for inspection and shipping.
3000 HP 360 RPM Electric Machinery, 1.0 service factor, Unused, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Electric Machinery
Two units available:, Unused surplus 3,000 HP (2,200 kW) synchronous motor, Manufactured by Electric Machinery:, -360 RPM, -3 ph, -60 Hz, -4000 V, -335 A, - Service Factor of 1.0, -Stored indoors, -Drawings, and digital manual available., Second unit SKU: EM618.
4000 HP 180 RPM General Electric, Frame 6000, DP, 1.15 service factor, QTS, 0.9 PF, 3 phase, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6000
4,000 HP (~3,000 kW) 180 RPM low speed synchronous motor, - Refurbished rotors and stators, - Test reports available, - Ready for inspection or shipment, - Pedastle Supported horizontally split self lubricated sleeve bearings, - Starting Torque 200% with 400% Inrush, - Pull out Torque 225%, - Rotor Current at 2.0 PU ...more
4500 HP 1785 RPM Louis Allis, Frame 7411Z, WPIIX, 1.0 service factor, 4000 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Louis Allis
Frame: 7411Z
LOUIS ALLIS Armor Line 4,500 HP (3,355 kW) Motor:, - 1785 RPM, - 3 Ph, - 60 Hz, - 7411Z Frame, - Type WPIIX, - 4000 Volts, - 556 Amps, - Code E insulation, - S.F. 1.0, - Continuous duty., - Overall Dimensions in inches: 91 L x 116 W x 83 H, - Approximate weight: 20,700 lbs..
5000 HP 257 RPM General Electric #78805, Frame 6546S, 1.0 PF, 4160 Volts
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6546S
- 10 units available, - Double shaft configurations, - Made by Electric Canada, - 5,000 HP (3,730 kW), - Frame: 6546S, - Model: 78805, - Type: TS, - Class 28 - 3860, - 257 RPM, - 536 amps, - 60 Hz, 3 Ph, - 1.0 power factor, - Excitation voltage: 125, - Excitation amperage: 280, - Temperature rise: 60 C, - Priced as-is ...more
5500 HP 257 RPM General Electric #78558, Frame 6547-1/2 W, 12000 Volts (6 available)
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 6547-1/2
- 6 motors available, - Shut down in good working condition, - Exciters available, no starters available, - Currently installed, - Made by GE Canada in Toronto, - Frame: 6547 1/2 W, - Model: 78558, - Class: 28-4250, - RPM: 257, - Form: AL, - HP: 5,500 (some have been upgraded to 6,000), - Voltage: 12,000, - Amps: 204 ...more
6000 HP 180 RPM General Electric, 4000 Volts (2 available)
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
- 6000 HP Electric Quadramatic dual-drive synchronous motors, - Two available, - 180 RPM, - 4000 Volts, - 60 Hz, - Brush-type horizontal synchronous motors, - Electric “STAT-X-ATOR” main field static exciters, - Electric “Q-AXIS” exciter, - 85 KVA field transformers, - Main motor circuit ...more
10000 HP 180 RPM General Electric, Frame 936DO, 1.0 PF, 3300 Volts, new (2 available)
Category: 60 Hz Synchronous Electric Motors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: General Electric
Frame: 936DO
- Unused surplus synchronous motor, - 2 units available, - Purchased as a standby spare, never installed, - Dual frequency: 50 or 60 Hz, - 936DO Frame, - Type TS, - 3300 Volt, - 7,500 kW (10,000 HP), - Insulation class F, - Power factor 1.0, - Self ventilation enclosure, - Variable speed operation, Dual frequency : ...more
60 Hz Wound Rotor (slip ring-rotor) Motors
1 Result
800 HP 1785 RPM Titan US Motors, Frame 6809S, TECT, 1.15 service factor, 4160 Volts
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Titan
Frame: 6809S
800 HP (596 kW) Titan US Wound Rotor induction Motor 1785 RPM, - 4160 Volts, - 3 ph, 60 Hz, - Frame 6809S TECT, - Amps 98, - S.F. 1.15.
Agitator Mixers and Blenders
2 Results
10 HP Chemineer #2HTD-10, agitator mixer, 1745 RPM
Category: Agitator Mixers and Blenders
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Chemineer
Model: 2HTD-10
Chemineer Model 2HTD-10 Agitator with 10 HP (7.4 kW) motor 1745 RPM.
300 HP Hayward Gordon #LHX-160C, Agitator, 25 RPMo, 41' diameter x 41' liquid level tank
Category: Agitator Mixers and Blenders
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hayward Gordon
Model: LHX-160C
- Model LHX-160C, - New, unused surplus, - For a 41 ft diameter x 41 ft liquid level tank, - 1600LHXV3 direct drive gearbox, - 25 RPM output, - 14 ft long – 12” diameter – Schedule 160 upper shaft with 4. 8 mm thick rubber covering, - 14 ft long – 12” diameter – Schedule 160 lower ...more
Apron feeder, ~7.5' x 24', 40 HP, 900 TPH, 720 mm bed depth, dribble conveyor, Unused
Category: Apron Feeders
Seller: D'Angelo International
Location: Bellingham, WA
- Unused apron feeder, - 2.4 x 7 meter, - 30 kW (40 HP) drive; 50 Hz, - Designed for 900 TPH, - 0.1 meter/sec operating speed, - 720 mm bed depth, - Includes dribble conveyor, - In storage, available now.
Apron feeder pans package,made to order, Fabricated steel pans, New
Category: Apron Feeders
Seller: D'Angelo International
Location: Bellingham, WA
- New apron feeder pans made to order for common sizes and brands such as Metso, NICO, Cedar Rapids, Sandvik, and others, - Made in North America, - U.S. quality control, - Fabricated steel pans, - Minimun order applies, - Contact us for, - Dimenisons required to provide quotation.
JCI KPI, Apron Feeder, 48" width x 20' L, Heavy duty closely spaced rollers, SKF bearings, Heavy duty steel frame, 2010
Category: Apron Feeders
Seller: D'Angelo International
Location: Bellingham, WA
Year: 2010
- JCI KPI 48 inch wide x 20 ft long apron feeder, - Manufactured in 2010, - Heavy duty closely spaced rollers, - Fabricated steel pans, - Drive coupling, - SKF bearings, - Heavy duty steel frame, - Made in USA.
Petimex Apron Feeder, 30" wide pan, 10' length,steel reinforced chassis,dual chain rows
Category: Apron Feeders
Seller: D'Angelo International
Location: Bellingham, WA
- Unused surplus apron feeder, - Manufactured by Petimex, - 30 inch wide pans, - 10 ft length, - Steel reinforced chassis, - Dual chain rows, - Dodge gear reducer, - Design capacity: 30 TPH, - 5 HP 230/460V motor with 7.5 HP gear reducer.
Belt Filters
5 Results
6.5' Phoenix Process Equipment Co #WX-6.5', 2 meter belt filter press, Control panel, controller
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Phoenix
- 2 meter belt filter press manufactured by Phoenix Process Equipment Company, - Previous application: gravel washer, - Model WX-2.0, - Includes control panel, - Includes controller, - Made in USA.
Compositech #4630, belt filter press, 135 sq.ft., 60" belt, 36.5' long, 20 HP total, 300 GPM, Nash vacuum pump
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Horizontal belt filter press, - 135 square foot filtration area, - 60 in belt, 36.5 ft long, -20 HP total, - Requires 40 GPM at 50 PSI water, - Requires 2 CFM at 100 PSI air, - 300 GPM design capacity, - Gear reducer, 59:1 reduction ratio, Nash vacuum pump:, - 400 RPM, - 150 HP 1,180 RPM and 460V, - 12 inch motor ...more
Compositech #5528, belt filter press, 135 sq.ft., 60 GPM @ 50 psi, 2 CFM @ 100 psi, 20 HP
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Refurbished model 5528 Compositech belt filter press, - Filtration area: 135 square feet, - Water usage: 60 GPM at 50 PSI, - Air requirements: 2 CFM at 100 PSI, - 20 HP drive train with VFD-ready motor, - Gear reducer with 2.0 service factor, - SKF bearings, - Feed box, - Lubrication system, - Discharge chute, - ...more
Compositech #4612, belt filter press, Automatic belt steering, Stainless Steel frame Remanufactured
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Remanufactured belt filter presses, - 2 units available, - Weighted rollers, - Shaft mounted gear motor, - Vacuum pan, - Drain pans, - Automatic belt steering, - EPDM main drainage belt: 95% of new condition, - Large capacity feed box, - Stainless steel frame, - New drive motor, - All new seals, bearings, slide ...more
Thryssen Krupp #42 B9 V3, Vacuum Belt Filters, 1175 squaring ft, mild steel frame, 4.2 meter 4-ply transport belt, Unused
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Thryssen Krupp
- 3 units available, unused surplus, - 109 square meter filtration area (1,175 square feet), - Model 42 B9 V3, - Frame constructed from mild steel, - 1430 mm rubber lined head and tail pulleys, - 4.2 meter 4-ply transport belt, - Belt drive with TECO Westinghouse motor, - 2.0 meter diameter filtrate receiver, - Nash ...more
Galigher style pump interchangeable with original brand Galigher Vacseal pump, new condition
Category: Centrifugal Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
- Galigher style pump interchangeable with original brand Galigher Vacseal pump, - New manufacture made in North America, - 520 natural rubber wear parts and liner, - Supplied with one coat primer and two coats machine enamel, - Belt guard and motor base included, - Motor and transmission quoted separately, - Supplied ...more
Chemical and Processing Equipment - Miscellaneous
6 Results
Galigher #Agitair, flotation cell with 20 HP (15 kW) motor 1770 RPM (2 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: AGITAIR
2 Units available- GALIGHER AGITAIR Flotation Cells, - 20 HP (15 kW) motors, - 1770 RPM.
Galigher #Agitair, flotation mechanisms (7 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: AGITAIR
Galigher Agitair Flotation Mechanisms, 7 units, 76.5 in. overall length - SOLD, - 26.25 in. diameter rubber coated steel rotors, - rubber coated shafts 10 units, 62 in overall length, - 17.25 in. diameter rubber coated steel rotors.
ShearClean #CDE, agitated tank sand washing modular, 200 TPH
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Shearclean
Model: CDE
ShearClean CDE agitated tank sand washing modular package:, - Attrition scrubbers, - Immediately available, - System design capacity: 200 TPH, - Includes drives and new wear parts, - Modular setup with chassis, - Adjustable retention time settings, Includes the following:, - Two banks of 4 cells, - Four dual electric ...more
Equipment for Gold Leach and Carbon Elution/Regeneration, Unused
Seller: D'Angelo International
Location: Bellingham, WA
Unused Equipment for Gold Leach and Carbon Elution/Regeneration, - All equipment is unused surplus, - See other listings under GP020 for additional equipment, Agitator tanks:, - Model LHX-160C, - For a 12,500 mm diameter tank, - 1600LHXV3 direct drive gearbox, - 25 RPM output, - 4300 mm long 12″ diameter - ...more
Dry grinding circuit, 300 TPD, consists of sizer, screen, ball mill, classifier & more
Seller: D'Angelo International
Location: Bellingham, WA
- 300 HP dry grinding circuit - 12 TPH throughput- 300 TPD Production- Consists of sizer, screen, ball mill, classifier, and baghouseBritish Rema Ball Mill:- 2.5m x 3.8 m ( 8.2 x 12.5 ft)- Steel liners- End overflow discharge- 250 kW Motor with reducer drive and controls- Lubrication systems for gears and bearings ...more
Triple Start Spiral Concentrators for gravity separation, (6) units available
Seller: D'Angelo International
Location: Bellingham, WA
Triple Start Spiral Concentrators, - Effective and low-cost solution for gravity separation, - 24 units available, - "Triple start” type, - They accept up to 3 different streams of feed, - Includes distributors and launders, Newer LD7 Style of Spiral Concentrators which involves the, following s:-Improved tramp ...more
Clarifiers
1 Result
U.S. Filter Lamella Clarifier, 240 GPM, Carbon Steel body, exterior / interior epox coating
Category: Clarifiers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
- Lamella style clarifier, - Manufactured in USA by US Filter, - Commonly used in wastewater treatment and process water clarification, - 240 GPM flow rating, - Carbon steel body, - Exterior epoxy coated, - Interior epoxy coated, - PVC settling plates, - Sludge settling cone, - Two matching units available Supplied ...more
84" Symons, Standard Heavy Duty Cone Crusher, Secondary Crusher, 1500 STPH, Well maintained from closed mine
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
– Secondary crusher, – Well maintained from closed mine, – Weight: 149,000 lbs, – Feed size: 10 – 18 inches (253 – 460 mm), – Production: 380 – 1360 metric tons/hour (418 to 1500 standard tons/hour), – Closed side setting: 20 to 63 mm (0.75 to 2.75 inches).
84" Symons, Cone Crusher Heavy Duty Bowl Assembly, New Liner, approx. 1/8" wear on threads
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
- Good Condition, - Bowl fully assembled, - New liner and good hopper, - All lock post rams installed on bowl, good condition, - Approx. 1/8” wear on threads, - Seal still exhibiting original machine lines.
84" Symons, Shorthead Heavy Duty Cone Crusher, 720 STPH, Reconditioned, 1980
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
Year: 1980
7 ft (2.1 m) Heavy Duty Shorthead Symons Cone Crusher, - Offered completely reconditioned, - Warranty Available, - Made in the USA, - Old style compression springs replaced with Innotech hydraulic tramp release system, - Accepted feed size: 2 - 8 inches (50 - 200 mm), - Closed side setting: 0.2 - 1 inch (5 - 25 mm), - ...more
84" Symons, Heavy Duty Standard Cone Crusher, Induction motor, Hydraulic bowl clamping, Water sealed machine, Feed bowl, Lube system
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
- 7 ft STD heavy duty cone, - Removed, disassembled, ready for inspection, - Induction motor with clutch, - Hydraulic bowl clamping, - Lubrication system, - Water sealed machine, - Feed bowl, - Made in USA.
84" Symons, Heavy Duty Shorthead Cone Crusher, Tertiary crusher, 720 STPH, Well maintained from closed mine
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
Heavy duty shorthead cone crusher:, - Inspected, report available, - Disassembled, removed, and in storage, - Build sheets available, - Weight: 70,200 Kg (180,000 lbs), - Tertiary crusher, - Well maintained from closed mine, Production :, - 210 to 720 standard tons/hour, - Accepted feed size: 2 to 8 inches (51 to 203 ...more
84" Symons cone crusher spare parts
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
Original Symons cone crusher parts available immediately as described below Please specify the SKU number of the parts you need with your request, - Used hydraulic adjust cylinders: SOLD, - 8 available, - Cleaned and painted, - CC1009a, - Control console, - Used, - CC1009b, - Crusher sheave, - Accommodates up to 14 ...more
84" Symons Standard Heavy Duty Cone Crusher, reconditioned
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
- Manufactured in 1980, - Offered completely reconditioned, - Old style compression springs replaced with Innotech hydraulic tramp release system, - Stored in USA, - Inspected and tested, with report available, - Production: 420 - 1500 standard tons/hour (380 - 1360 metric tons/hour), - Accepted feed size: 10-18 ...more
84" Symons Metso, Heavy Duty Shorthead Cone Crusher, spare parts, water sealed, lube system
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Symons
- 7 ft STD heavy duty cone, - Removed, disassembled, ready for inspection, - Lot of spare parts available, - Induction motor with clutch, - Hydraulic bowl clamping, - Lubrication system, - Water sealed machine, - Feed bowl, - Made in USA.
Metso Nordberg #HP800, STD and SH cone crushers, 1320 TPH, unused
Category: Cone Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Nordberg
Model: HP800
- 2 new and unused crushers still in factory packaging, - Professionally packed and stored indoors, - 1 standard and 1 shorthead, - Spare parts available at additional cost, - Lubrication and hydraulic systems are included, - Crusher drive included, Machine :, - Complete crusher weight: 152,000 lbs, - Accepted feed ...more
Conveyors Vibratory Feeders
2 Results
Triple S Dynamics, Horizontal Motion Conveyor Drive, 3 HP motor, 1160 RPM, 213T Frame, 230/460 V.
Category: Conveyors Vibratory Feeders
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Triple S Dynamics
Triple S Dynamics Horizontal Motion Conveyor Drive with 3 HP motor:, -1160 RPM, -213T Frame, -230/460 Volts, -3 Ph, -60 Hz.
Triple S Dynamics, Horizontal Motion Conveyor Drive, 5 HP motor, 1170 RPM, 215T Frame, 230/460 V.
Category: Conveyors Vibratory Feeders
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Triple S Dynamics
Triple S Dynamics Horizontal Motion Conveyor Drive: -, Reliance 5 HP motor, - 1170 RPM, - 215T Frame, - 230/460 Volts, - 3 Ph, - 60 Hz, 1 additional unit available: CV532.
18" x 60" McLanahan, 3-roll crusher, mounted on portable 2-axle chassis, Feed Hopper
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Mclanahan
- McLanahan 18 x 60 inch 3-roll crusher, - Mounted on portable 2-axle chassis, - Feed Hopper, - Crusher Feeder, - Discharge conveyor (foldable for transport), - Diesel powered module.
20" x 32" Metso-Outotec 2-Stage crush and screen package
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso-Outotec
Metso-Outotec 2-Stage crush and screen package:, -Metso C80 Jaw Crusher, -20" x 32" feed opening, -55mm Closed side setting, -75 kW (100 HP) Motor, 1800 RPM, Squirrel Cage, -Metso HP100 Cone Crusher, -Standard Cone with coarse liners, -16mm Closed side setting, -90 kW (120 HP) Motor, -Metso Vibrating Grizzly Feeder ...more
42" x 65" Allis-Chalmers, Mark I Superior Gyratory Crusher, 400 HP GE motor, Lot of spare parts, 2000 TPH
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- Mark 1 42x65 inch gyratory crusher, - Manufactured in USA by Allis Chalmers, - 400 HP GE motor, - Motor and crusher sheave, - Lubrication system with tank, pump, and heat exchanger, - Lot of associated spare parts available, Crusher :, - Throughput range: ~700-2000 TPH, - Open side setting: ~4-8 inches.
48" x 74" Allis-Chalmers, gyratory crusher, 3000 TPH, 500 HP
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 48 x 74 in (1.2 x 1.9 m) gyratory crusher, - Removed and in storage, - Disassembled for inspection and transport, - Made in USA, Machine :, - Throughput: 1200 - 3000 tons per hour, - Product size: 5 - 8 inches, - Requires 500 HP motor.
60" x 89" Allis-Chalmers, Gyratory Crusher, 6115 STPH, Spider, Hydroset
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
Allis Chalmers 60" x 89" (152 x 226 cm) Gyratory Crusher, including, - Bottom shell, - Lower Top Shell, - Top Shell Section, - Spider, - Spider Arm Liners, Arm Guards, Concaves, - Mainshaft, - Mainshaft Lower Journal, - Hydroset, - Eccentric, - Bottom Shell Bushing, - Eccentric Support Plates, - Pinion Shaft ...more
60" x 109" Allis-Chalmers Superior Gyratory Crusher, 5000 TPM, 1990 (2 available)
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 2 Available - 60 x 109 in. Gyratory Crusher- Manufactured by Allis Chalmers- Year: 1990- Approximate Capacity: 5000 TPH - Liners recently replaced with more than 50% liner wear left - In good working condition when taken out of commission- Hydroset hydraulic supported mainshaft - Crushing Chambers provides even ...more
62" x 75" Metso, Superior Gyratory Crusher, MKII Svedala, 800 HP, 9650 TPH, GSI switchgear, Flared bottom shell
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
- 62 x 75 inch Mark-II Superior Gyratory Crusher, - Manufactured by Metso, - Flared bottom shell, - GE 600 HP induction motor, - Cutler-Hammer motor control center, - GSI switchgear, - Spare parts package available at additional cost, - Crusher structure with dump hopper available at additional cost, Machine :, - Max ...more
78" x 60" FAM, Double Roll Crusher, 350 TPH, Heavy duty, Hydraulic rolls gap adjustment, (2) 350 HP motor
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Fam
- For 350 TPH, - 36 x 36 x 28 in lump feed, - Designed for 8 cu yd bucket dump, - Product, 95% 0 - 8 in, - Previously fed by 5 x 50 ft apron feeder (available separately), - Heavy duty, lined crushing chamber designed for zero deflection, - Hydraulic rolls gap adjustment, - Replaceable crushing tooth segments, - ...more
Polysius #20/10-5, high pressure grinding roll, (2) 500 HP motors with reducers, 450 TPH
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Polysius
Model: 20/10-5
- High Pressure Grinding Roll (HPGR), - Manufactured by Polysius, - Model 20/10-5 PM, - Powered by two 500 HP motors with reducers, - Two roll construction with floating and stationary roll, - 250 MPa of crushing force, - Rated Capacity: 450 TPH.
Crushed Ore Bin New Custom Manufacture
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
- New custom manufacture, - Wide range of sizes possible, - Non-stiffened hopper bottom bin with optional roof configurations, - Discharge opening for conveyor, clearance below discharge, - Bin rests on galvanized braced legs (included), - Designed for Seismic Design Category C, - Silo eave seal for dust control, - ...more
Crushing Plants and Impact Crushers
2 Results
Irock #HSI mobile crushing plant, 40" x 42", 300 HP, 6' x 16' 2-deck screen, 2 cross conveyor
Category: Crushing Plants and Impact Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Irock
Model: HSI
- Horizontal impactor mobile crushing plant, - 46 x 16 vibrating grizzly feeder, - 40 x 42 in HSI with 300 HP, - 6 x 16 ft 2-deck screen, - 2 cross conveyors, - All mounted on a 3 axle chassis, - Removed from plant and in storage, - Avialable for inspection or shipment, - Can accept 20x30 inch slabs, - 50-150 TPH ...more
Metso ST3.8, Mobile Screen Plant, 5x18 ft 2-deck inclined screen
Category: Crushing Plants and Impact Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: ST3.8
Metso Track-Mounted ST3.8 Screening Plant, Including the Following:SCREEN:5x18 ft 2-deck inclined screen with forward, and reverse operation, PLC controls, and Rexroth, piston motor with speed and rotation sensors., Mounted on heavy-duty sub-frame with maintenance, platform ladder and top deck chute liners. FEEDER:9.6 ...more
DC Motors Electrical, 475-900 Volts
3 Results
1000 HP 430/1290 RPM Reversing Motor, 500 VDC (3 available)
Category: DC Motors Electrical, 475-900 Volts
Seller: D'Angelo International
Location: Bellingham, WA
1000 HP, 430/1290 RPM, 500 VDC Reversing Motors:, - QTY: 3 (1-New Spare, 2-Used EOK), - HP: 1000 (750 kW), - RPM: 430/1290, - Voltage: 500 VDC, - Current: 1590, - Manufacturer: GEC, - Type: DLC900/450, - Winding: Shunt, - Ventilation: Forced air, - Bearings: A/F, - Weight: 38,360 LB.
2000 HP 800 RPM Westinghouse, 2630 amps, 600 Volts, 11"L x 7'-7"W x 7'H
Category: DC Motors Electrical, 475-900 Volts
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Westinghouse
2000 HP (1500 kW) Westinghouse DC Motor, - 800 RPM, 600 V, 2630 A, - 11'L x 7'7"W x 7'H, - 25,200 Lbs, - Legal truck load.
2800 HP 53 RPM SEA, Frame LH2207, 2350 amp.,NEMA MG 1-23.40, class F., 125 V
Category: DC Motors Electrical, 475-900 Volts
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Abb
Frame: LH2207
Service:, - 2,100 KW (2,800 HP) continuous, - 4,080 KW (5,475 HP) momentary, Voltage:, - 1,000 Volt continuous and momentary, RPM:, - 53 RPM rated, 47 RPM momentary, Amperage:, - 2,350 Amp continuous, 5,170 Amp momentary, kNm:, - 378 continuous, 830 momentary, - Manufactured in 1974, - Reversible, - Insulation class: ...more
Dewatering Press
1 Result
Frontier Technologies Dewatering Press, 1 meter wide bel, Stainless Steel frame, 15 rollers on top
Category: Dewatering Press
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Frontier
- Manufactured by Frontier Technologies in USA, - 1 meter wide belt, - Stainless Steel Frame, - 15 Rollers On Top, - 7 Rollers On Second Level, - 4 Rollers On Bottom Level, - Drive Motor : 5 HP, - Removed and ready to inspect or ship, - Includes control panel.
Prominent #M5HaD 0065110 PC TT 10B 50000, Diaphragm Dosing Pumps, acid duty, Unused
Category: Diaphragm Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Prominent
Model: M5HAD
Unused Prominent Diaphragm Dosing Pumps, - Prominent Model M5HaD 0065110 PC TT 10B 50000 – Acid Duty (Qty 2), - Duplex, motor driven, hydraulically actuated diaphragm dosing pump, - PTFE faced EPDM diaphragm, - Dosing Capacity: 5,110 / 6,108 Liters/hour @ 6 bar (1,618 gph @ 87 psi), - Max Stroke Frequency: 133 ...more
5 Ton, Atlas, Trolley Locomotive, 24" truck gauge, (2) 25 HP motors, 250 VDC, rebuilt
Category: Diesel and Electric Locomotives
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Atlas
- Good condition, - 24 in. (600 mm) truck gauge, - 2 motors 25 HP, - 250 VDC, rebuilt, - All new axles, wheels, system brakes, bearing boxes, pinions and gears, springs, etc., - Needs cam control, resistors, cables, trolley arm and lights.
6 Ton, Goodman, Battery Locomotive
Category: Diesel and Electric Locomotives
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Goodman
- 6 Ton battery powered trolley locomotive, - Model 75-B-24-54-T - 12 km/hr speed, - Two 30 HP motors, 250 V DC, - Bending radius: 530 mm (21 inches), - 54 inch axel spacing, - 3,000 lbs tractive effort at 25% adhesion, - 24 or 30 inch gauge available, - Dimensions: 3.8 x 1.2 x 1.2 meters.
15 Ton, Goodman #136B, trolley battery locomotive, parts machine, 150 HP (3 available)
Category: Diesel and Electric Locomotives
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Goodman
Model: 136B
- 3 units available, rebuildable cores, - Goodman Model 136 B, - Motors 250 Volt DC, 75 HP x 2 motors, total 150 HP per locomotive, - Minimum track gauge 36 in, wheels 33 in diameter, - Starting draw bar pull 6,600 lbs, - Speed at rated running draw bar pull of 5,500 lbs is 8 MPH, - Overall width for 36 in gauge is ...more
Greensburg Battery Locomotives, 24 gauge, 140" length, 38" width, 50" height including battery box
Category: Diesel and Electric Locomotives
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Greensburg
Greensburg Battery Locomotives, 24" Gauge, Length 140 ".
Disc Filters
2 Results
EIMCO, vacuum disc filter, 8 disc, 890 squaring ft., Nash vacuum pump, 200 HP belt drive
Category: Disc Filters
Seller: D'Angelo International
Location: Bellingham, WA
- 8 disc filter unit, - 180 sq meter filter area (890 sq ft), - Nash vacuum pump, - 200 HP induction motor belt drive.
Outotec #CC-144, Larox Disc Filter, Unused, M30 filter media, 144 squaring meter, 35 cu. meter, 3800 mm disc diameter
Category: Disc Filters
Seller: D'Angelo International
Location: Bellingham, WA
- Unused surplus Outotec Larox disc filter, - Capillary action disc filter, - Model CC-144, - 144 m2 filtration area, - M30 filter media, - 3800 mm disc diameter, - 40,000 lb shipping weight, - 35 cubic meter volume.
Dryers and Coolers
1 Result
Thermal Technologies, Elution Heaters, 485 GPM, 100 PSIG @ 350C, Two independent skids, unused surplus
Category: Dryers and Coolers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Thermal Technologies
- Thermal Technologies unused surplus Elution Heaters, - Flow rate: 485 gallons/minute (29,000 cubic meters/hour), - Two independent skids, - Each Skid has 8 bundles, - Each bundle rated 480v 3ph @ 313kw - (Total 2,504 kW per skid) - (5,008kw total), - 12″ NPS 316L SS shells designed for 100 PSIG @ 350C complete ...more
EIMCO, Thickener tank, 40' diameter tank support walls, bridge, rakes, sidewalls are bolt together
Category: Epoxy Lined Tanks
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Eimco
- EIMCO thickener tank, - 40 ft diameter tank support walls, - Bridge, - Rakes, - Tank sidewalls are bolt together, - Mechanism not included.
Flotation Cells
24 Results
Agitair Flotation Cells, rubber wear parts, 3 sets of 2 cells, feed & discharge box, Bank of 6
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Agitair
- Used Bank of 6 Agitair Flotation Cells, - Rubber wear parts, - Arranged as 3 sets of 2 cells with a feed and discharge box, - Cels include used 15 and 20 HP motors, - ~50 cu ft volume per cell.
Denver #15 Flotation Cell Package Sub-A
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
Model: 15
- Denver Sub-A flotation cells, - Designed as rougher/scavenger circuit, - 2 banks of 6, - 1 bank of 2, - 5 HP motors, 1 per bank of 2 and 2 motors per bank of 6, - 12 cubic foot cells, - Motor guards, - Pulleys, - Primed and epoxy coated, - Discharge and launder boxes, - Froth paddles, - Made in USA, - Immediately ...more
Denver style DR Sub-A flotation cells, complete mechanism with rubber or epoxy coated standpipe
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
- Manufactured in North America with over 25 year history, - Completely interchangeable with original Denver Sub-A cells and mechanisms, – Agitation mechanism with rubber coated standpipe, - Spare mechanisms sold separately (CLICK HERE), - Flat-style impeller with bladed rubber diffusor, - Rubber coated ...more
Denver DR24 DR-Style 100 cu.ft. flotation cells new
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
Denver-Style flotation cells manufactured in North America, - Completely interchangeable with original Denver cells, - See reference tables below for model numbers, tank volumes, and other, - Original manufacturer part numbers do not apply, Flotation Cells include the following:, TANKS:, - Manufactured from A36 steel ...more
Denver style flotation cells Drop-in interchangeable replacement mechanisms (agitators)
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
Drop-in interchangeable replacement mechanisms (agitators) for Denver flotation cells, - Fits corresponding Denver model numbers (table here), - Identical in construction and performance to original Denver equipment, - Over 20 year history of proven performance and fit, - Complete mechanism with rubber wear parts, - ...more
Denver-Style DR Flotation Cell Parts Kits
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
New manufacture parts kits for Denver-Style DR flotation cells, - Parts are interchangeable with original Denver DR cells or D'Angelo's DR-style cells, - Standard wear part material is 520 natural black rubber, - Rubber is hot vulcanized onto the parts core, - Please refer to the table below for more ...more
Denver-Style Sub-A Flotation Cell Parts Kits
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
Wear and spare parts kits for Denver-style Sub-A flotation cells, - Parts fit original Denver Sub-A cells as well as D'Angelo Sub-A flotation cells, - Wear parts use hot vulcanized 520 black rubber, - Parts diagram is below for reference, - Reference table below shows the models we service, - Typical delivery time ...more
Denver style sub-A flotation cell mechanisms, natural vulcanized rubber wear parts, belt guards, and motor bases, new condition
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
- Drop-in replacement of Denver Sub-A flotation mechanism, - Complete mechanism with rubber coated standpipe and wear parts, - Interchangeable with original Denver Equipment Company mechanisms, - Made in North America, - Rubber coated impellers, diffusers, and bells, - Belt guard, - Mechanism assembled and packed for ...more
Denver Flotation Mechanisms, approx 8' long (2), approx 6' long (23), 20 HP, 1160 RPM
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
Denver Flotation Mechanisms, 2 units, approx. 8 ft long, - Urethane 27.5 in. diameter rotors and 36 in. diameter stators, - 30 in. diameter 4 belt sheaves, 23 units, approx. 6' long, - Urethane 27.5 in. diameter rotors and 36 in. dia. stators, - 24 in. diameter 4 belt sheaves, Motors: 20 HP, 1160 RPM, R DutyMaster.
MinPro flotation cells, 100 Cu. Ft.
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Minpro
- 32 cells available; 1 bank of 12, 2 banks of 10, - 100 cubic feet per cell, - Cleaned, painted, tested, - Rubber and bearings in good condition, - Motors, belts, and pulleys included -, - Launder boxes required, - Priced Ex-works.
Minpro Flotation Cells; Bank of 10, F15
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Minpro
- Arranged as: feed box - 5 cells - intermediate box - 5 cells - discharge box, - Two 5-cell overflow tanks with full length launders, - 10 mechanisms with existing used impellers and diffusers, - Four 5 HP 575 Volt motors with dual drives and belt guards, - Two 3 HP 575 V motors with single drives and belt guards, - ...more
Wemco #66 Standard, Flotation Cells, Bank of 4, Includes feed, discharge, and launder boxes with discharge flanges
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Model: -66
- Wemco flotation cells, - Model 66, - Bank of 4, - Includes feed, discharge, and launder boxes with discharge flanges, - 60 cubic foot cells, - Includes one 10 HP motor per cell, - Rubber wear parts, - Belt guards, - Froth paddles.
Wemco #120, Flotation Cell Mechanisms, 300 cu.ft., 75HP, wear part included
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Model: 120
- Spare mechanisms from Wemco model 120 flotation cells, - Designed for 300 cubic foot cells, - Removed and in storage, - Includes wear parts and 75 HP electric motor, - Removed in good working order.
Wemco #164, Flotation Cell Mechanisms, 1000 cu.ft., 100HP, wear parts/belt guards included
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Model: 164
- Wemco model 164 flotation cell mechanisms, - For 1,000 cubic foot tanks, - 100 HP drive motor, - Wear parts and belt guards included, - Mechanisms are removed and in storage for inspection or immediate shipment, - Loading and transport are additional, - Removed.
Wemco #164 flotation mechanisms
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Model: 164
Wemco model 164 Flotation Mechanisms -, For 1,000 cubic foot square tank, - Rubber wear parts, - Removed and in storage, - Operates with 100 HP motor (used, included), - 3 units available, - Offered as is, - EX works storage site, - Designed for Wemco square tank cells, - New rubber wear parts available separately.
Wemco flotation level Control components, stilling well/float cage assemblies, new surplus
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Flotation Level Control Systems:, Automated flotation tank level control through automated darrt valve actuator, - Rosemount differential pressure sensor flange mounted to cells, - Fisher Type 657 diaphragm actuator size 45 moutned in desired location, - Proproetary powder coated steel bracketry.
Wemco-Style Flotation Cell Parts Kits, replacement wear and critical spare parts
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
Replacement wear and critical spare parts for Wemco-style flotation cells, - Parts fit Wemco original cells and Wemco-style cells, - Refer to table below for models available, - Wear material is vulcanized 520 natural rubber, - Minimum order applies, The following parts kits are available: - Rotor/Stator Kit: ...more
Wemco Style Round Tank Flotation cells, new
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
- New round tank flotation cells, - Made to order in North America, - Complete with mechanism, - All necessary cell and mechanism parts coated with protective 520 natural rubber (including discharge launders), - Feed, union, and discharge boxes available for cell banks, - Dart valves ready to automate, - Spare ...more
Wemco flotation cells, complete with mechanism, belt guards, motor baseplate, new condition
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
- New and unused flotation cells made to order in North America, - Complete with mechanism, belt guards, and motor baseplate, - All necessary cell and mechanism parts coated with protective 520 natural rubber (including discharge launders), - Feed, union, and discharge boxes available for cell banks, - Dart valves ...more
Wemco-Style Flotation Cell Mechanisms, New
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
- Drop-in replacement or spare mechanisms for Wemco flotation cells, - Interchangeable with original Wemco equipment, - Made in North America, - Motors, sheaves and belts quoted separately, - Natural rubber wear parts, - Replacement wear parts kits also available, - Export-approved packaging available, - Ideal for ...more
Wemco Flotation Cell Mechanisms and Tanks Model 120
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
- Wemco model 120 Flotation cell mechanisms and tanks, - Rubber and Polyurethane wear parts, - Removed and ready for inspection or shipment, - Available as bare mechanisms for spares, or as complete used cells with tanks.
Wemco 66 Flotation Cells with Mechanisms, Unused Surplus
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Wemco
- Two banks of two cells, four cells of 72 cu ft each, unused, - Four new flotation mechanisms, - Two used flotation mechanisms, - Complete with impellers, diffusers and dispenser skirts.
Flotation circuit suitable for 300 - 500 TPD of throughput, All new equipment
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
New manufacture flotation circuit suitable for 300 - 500 TPD of throughput- All new equipment- Made in North America- 17 week typical delivery time- Point of delivery: Douglas, Arizona- Exact rate of production depends on material handled and of site- GPM range of circuit: 400 - 500, - Idealy for processing metals ...more
Flotation Cells accessory package, new induction motor, blowers, sheaves, belts, level Control system
Category: Flotation Cells
Seller: D'Angelo International
Location: Bellingham, WA
Flotation cell accessory packages:, - new induction motors, - Blowers, - Sheaves, - Belts, - Level control systems, - Spare parts, D'Angelo International can outfit your new or existing flotation cells with a range of accessories and add on's to improve performance and simplify procurement and configuration.
Gear Reducers, With Driving Unit
1 Result
40 HP, 1170 RPM, Horsburgh & Scott Inching Drive and Gear Reducer, 755.37:1 ratio
Category: Gear Reducers, With Driving Unit
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Horsburgh & Scott
- Size: 275-QB - 755.37:1 ratio, - Input RPM: 1170, output ratio 1.55 RPM, - Internal gears in great condition (shown in photos), - Gear box dimensions: 99 in L x 52 in W x 56 in H, - Input shaft diameter: 1 15/16 in, - Output shaft diameter: 10 7/16 in, - Oil Capacity: 227 US Gallons, - Service Factor: 0.83, Motor: ...more
Gearboxes (Gear Reducers - No Driving Unit)
4 Results
800 HP @ 885 RPM, Horsburgh & Scott Herringbone or Helical Speed Reducer, 4.03:1 ratio
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Horsburgh & Scott
Horsburgh & Scott Herringbone or Helical Speed Reducer:, - Size SR-26 - Ratio 4.03:1, - HP Rating 800, Input RPM 885, - S.F. 1.0, - Input Shaft 5-15/16" diameter x 11-1/2" Long, - Output Shaft 7-15/16" diameter x 15-1/2" Long.
820 HP @ 800 RPM, Dominion (Metso), 4.63:1 ratio, 2.1 service factor, 6" dia. x 11-3/4" Long
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Dominion
- Input RPM 800, - Reduction ratio 4.63:1, - Rated HP: 820, - Service Factor 2.1, - Input Shaft 6" diameter X 11-3/4" Long, Output Shaft 7-7/8" diameter X 15-5/8" Long, - Immediately available from storage.
1060 HP @ 1176 RPM, Lufkin #SF2600S, 4.65 :1 ratio, 1.5 service factor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Lufkin
Model: SF2600S
Lufkin Gearbox from a 10.5 x 13 ft ball mill, - 1,060 HP, - Ratio: 4.656:1, - Input RPM: 1176, - Cat Rating: 1590 HP, - Service Factor: 1.5, - Model: SF2600S, - Lube: 4EP for under 60 degrees F, 5EP for over 60 degrees F environments.
2000 HP @ 1163 RPMi/892 RPMo, Falk #425A1-CA, reduction ratio 1.304:1, Unused surplus
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Falk
Model: 425A1-CA
- Unused surplus Falk gearbox, - Model 425A1-CA, - Parallel shaftPrivate, - Rated for 2,000 HP, - 2.54 SF, - 1.304:1 reduction ratio, - 1163 RPM input speed, - 892 RPM output speed, - Ready for immediate shipment, - Made in USA.
Grinding Mills - Ball, Pebble, Sag, Mining
37 Results
2.6' x 4' Denver Ball Mill, 10 HP, steel liners, ball charge, infeed hopper w/spout feeder
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Denver
- Denver 30" Diameter x 54" long Ball Mill, - Steel liners, - Ball charge, - Incudes infeed hopper with spout feeder, - 10 HP drive motor, - Flywheel drive system, - Belt guard, - Gear guard, - Straight cut gears, - Mill and drive mounted on steel operating skid.
5' x 3' SAG mill with 20 HP, Skid mounted, Chain-driven w/ rollers under shell
Seller: D'Angelo International
Location: Bellingham, WA
- Skid mounted, - Chain-driven with rollers under shell, - Falk gearbox Motor:, - 20 HP (15 kW), - 1750 RPM, - 256T frame, - 230/460 V, - 3 Ph, - 60 Hz.
5' x 10' Kinetics, ball mill, Tire Driven, (2) 50 HP WEG motors, (2) gearboxes w/ 2.0+ SF, New
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Kinetics
- New unused ball mill made in North America, - 1.5 x 3 meter internal shell dimension, less liners, - Single piece rolled steel shell, - Tire Driven, - Rubber liner package with installation hardware, - Rubber lined feed spout, - Wet grinding overflow discharge arrangement, - Discharge trommel, - Drive assembly ...more
7' x 5.5' Ball Mill with 100 HP, Scoop feeder, Shell access door, 8" bull gear face
Seller: D'Angelo International
Location: Bellingham, WA
- 7 x 5.5 ft grinding volume, - 100 HP induction motor, - Scoop feeder, - Shell access door, - 8" bull gear face, - 18 tooth pinion gear, - Straight cut gear teeth, - I-beam steel skid, - Babbitted trunnion bearings, - Belt drive, - Steel liners.
8' x 6' Hardinge, conical ball mill with 200 HP, Wet grinding, overflow discharge, Single piece shell w/ access hatch
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hardinge
- 8 x 6 ft Hardinge conical ball mill on a steel skid, - Wet grinding, overflow discharge, - Single piece shell with access hatch, - Baldor motor: 200 HP, 3600 RPM, 460 V, excellent condition, - Falk gear reducer: 5.86:1 reduction ratio, 1.5 SF, - Liners installed, - Double helical gears, - New gear guards, - Mill ...more
8' x 17' Kennedy Van Saun ball mills, 400 HP, gear box 6.95 ratio, air clutch, rubber liner, (3 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Kennedy
-3 Available, -Siemens 400 HP 4,000 Volt Motor, -With Falk Gear Box 6.95 Ratio, -Eaton Air Clutch, -Low & High pressure Bearing Lube system, -Rubber Liners, -Plates and guards, -Single Helical Main Gears and Pinion Gears, -Grinding Media Available Upon Request.
8.5' x 13.5' Outotec Ball Mills with450 HP, unused, never instealed or operated (2 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
- Unused Outotec Ball mills, - Delivered to site, never installed or operated, - 2 units available, - 8.6 x 13.5 ft mill shell (3.2 x 5.6 m), - Trunnion supported ball mill, - Ring and pinion gear drive, - Mill drawings available, - 450 HP WEG motor (340 kW), - 575V, 60 Hz, 3 Ph, - 1800 RPM, - SF 1.0.
9' x 7' Allis-Chalmers, for wet grinding & overflow discharge, 2-doors, cast heads, 259 tooth main gear
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 9 ft dia x 7 ft length ball mill, - Manufactured by Allis Chalmers, - Configured for wet grinding and overflow discharge, - Mill components disassembled, inspected, cleaned, refurbished, and painted, - mill shell with 2 doors, - Cast heads, - New rubber liner set available separately, - Herringbone cut main and ...more
9' x 10' Allis-Chalmers, ball mill with 400 HP motor, Feed and discharge heads, overflow discharge, wet grinding
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 9 x 10 ft Allis Chalmers ball mill, - Feed and discharge heads, - Configured for overflow discharge and wet grinding, - 2 piece bull gear with 248 teeth and 13 inch face, - 20 tooth pinion with assembly, - 2 lubrication pumps with 0.5 HP motors and air receivers, - Discharge trommel, - Removed and in storage, - ...more
9' x 12' Allis-Chalmers, Rod or Ball Mill with 400 HP, Herringbone bull gear and pinion
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
9 x 12 ft. Allis Chalmers Rod or Ball Mill w/ 400 hp, - Herringbone (1 piece) bull gear, 302 teeth, 20 in. face, - Herringbone pinion, 30 teeth, 20 in. face, - Westinghouse 400hp, 750 rpm, 575 volts, - Model SR-2614 reduction gear, 720 rpm input, 160 rpm output, 4.571:1Output: 160 R.P.M., SPARES (Additional cost): ...more
10' x 14' Marcy Ball Mill with 800 HP motor, Overflow discharge, Pinion, 1.5 SF
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Marcy
- Overflow discharge, - Previously NDT tested, - Lincoln gear-spray lubrication system, - March 650-AL trunnion bearing lubrication system, - New spare bronze insert, - Ring gear, - Pinion, - Eaton Airflex 28VC650 dual narrow air clutch, Falk parallel shaft gear reducer:, - 4.792:1 reduction ratio, - 1.5 SF, Motor:, - ...more
10.5' x 13' (3 x 4 m) Allis Chalmers, Ball Mill parts
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
Shell- One piece, Forty-Eight 40 mm diameter bolt holesTwo Trunnion Bearings- Bearing journal with insert- Inside diameter- 1132 mm- Two bases in good conditionRing gear cover - 5 pieces (SOLD)Trunnion and motor base plates, 2 pinion drives with couplings (SOLD), 1 drive shaft (SOLD), 1 babbitt bearing (SOLD).
10.5' x 18.5' Outotec Ball mill with 1000 HP, cast mill heads, unused surplus (2 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
- Unused surplus Outotec ball mills, - 2 matching units available, - Delivered to site, never installed or operated, - 10.5 x 18.4 ft mill shell (3.2 x 5.6 m), - Cast mill heads, - Trunnion supported mill, - Ring and pinion gearset, - Overflow discharge, - Drawings available, - Mills immediately available, - 1,000 HP ...more
12' x 5' Outotec, Unused Surplus SAG Mill with 350 HP
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
- Unused surplus Meso Outotec SAG mill, - Still in factory packaging, - Delivered, never installed or used, - 12.1 ft diameter (3.7 m), - 5 ft length (1.5 m), - Trunnion supported mill with ring and pinion gearset, - 350 HP (250 kW) variable speed drive, 575V, - Metallic liners, - Grate discharge, - Immediately ...more
13' x 18.6' Nordberg, Rod/ Ball mill with 1500 HP motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Nordberg
- 1500 hp (1125 kw) AC 60 Hz synchronous motor, 225rpm, - Eaton Fawick air clutch 46VC 1200, - Mill shell and cast heads, - Feed and discharge trunnions and liners, - Trunnion bearing assemblies, - Refurbished girth gear (2 pcs), 570 mm wide, 310 tooth, 1.25 DP helical cut., - Pinion shaft assembly, 21 tooth pinion ...more
13.5' x 4' Marcy, SAG mill with 300 HP motor, designed for dry grinding, 1787 RPM
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Marcy
- 13.5 x 4 ft shell, - Originally designed for dry grinding, - removed, disassembled, and in storage ready for inspection and shipping, - Mill trunnions and wear parts protected during storage, - Trunnion bearings cleaned and in good condition, - Gears in good condition, - Includes a Falk gearbox, air clutch, and ...more
13.5' x 20' Nordberg rod mill, 2000 HP
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Nordberg
- Nordberg 13.5 ft diameter x 20 ft length Rod Mill- 2,000 HP (1,500 kW) Electric synchronous motor- 60 Hz and 4000V- 210 RPM- 6000 frame, - Manufactured in Canada- Used steel liner package, removed for shell and head inspection, - Double-wave pattern liners.
14.5' x 28' Allis-Chalmers, ball mill, 3000 HP, Configured for wet overflow discharge
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
- 2 mills available: 14.5 x 28 ft (4.4 x 8.5 m), - Configured for wet overflow discharge, - 2 piece mill shell, - Trunnions with liners, - White metal trunnion bearing journals, - 289 tooth two-piece bull gear, - Bull gear guards, - 24 tooth pinion, - Falk gear reducers: 4.096:1 ratio, - One inching drive available ...more
15' x 19' Nordberg, Ball Mill with 3000 HP motorw, wet grinding, overflow discharge, Farwick dual clutch
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Nordberg
- 15 x 19 ft mill shell, - 2 piece shell, - Configured for wet grinding and overflow discharge, - 3,000 HP Westinghouse synchronous motor, 240 RPM 4160 V, - Containerized motor controls, - Farwick dual clutch.
18' x 10.5' Fuller FLS, SAG mill with 1500 HP motor, Rubber-lined, 1995
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Fuller
Year: 1995
SAG mill, 18 ft diameter, 10.5 ft length.- Manufactured by Fuller 1995, - Rubber-lined, used rubber liners included, - 1500 HP, 4160 volt, 1192 RPM, continuous motor, 5010 frame Motor, rebuilt and inspected., - Spare used motor available- Moventas gear reducer, 4.5:1 gear ratio, 264.4 output RPM., - Motors are VFD ...more
18' x 27' Citic, Ball Mill with 5500 HP motor, Rubber liners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Citic
Unused 18 x 27 ft (5.5 x 8.1 m) Citic Ball Mill with 5,500 HP (4,100 kW) 893 RPM WRIM induction motor., - Rubber liners, 2 sets, - High- and low-speed drive couplings, - Sole plates, Additional motor info:, -WRIM - 893 RPM, - 4160 Volt, - 3 Phase, - 60 Hertz.
18' x 30' Outotec, SAG Mill with 6300 HP motor, Unused surplus, 2013
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
Year: 2013
18 x 30 ft ( 5.5 x 9.15 m) Outotec SAG Mill with 6032 HP (4500 kW) motor:, - Unused surplus., - Made in 2013., - Includes: Lube system, feed chute, trommel, instrumentation, inching drive, and mill liners., - WEG 50 Hz wound Rotor Induction Motor: 11,000V, 994 RPM, Size MA710B, Enclosure CACA IC 611, 6 Pole, 3 Ph ...more
20' x 10' ANI/FLSmidth, SAG Mill with 2,500 HP motor, Enclosed gear drive, Lube system
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ani/flsmidth
- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter), - Manufactured by ANI/FLS, - Includes WEG 2,500 HP motor, - Enclosed gear drive made by David Brown, - Inching drive, - Mill is currently operational and installed, - Discharge trommel, - Lubrication systems, - Electrical control systems, - Liners installed, - Grate ...more
21' x 11' Hardinge, SAG mill with 2875 HP DC Motor, w/o liners and bolt package, Nuttall gear reducer
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hardinge
21 x 11 ft Hardinge SAG mill with 2,875 HP- Mill is currently removed and in storage, - Without liners or bolt package, - Nuttall gear reducer, - McLellan liner handler available separately, - Spare motor available, - Operated in a Newmont Goldcorp plant, Toshiba 2,875 HP D.C. motor with variable speed drive- 240 RPM ...more
22' x 7' Hardinge, SAG Mills, Motor Quoted separately, Shell reconditioned
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hardinge
22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills, - Motor Quoted separately, - Previously ran on two 800 HP motors, - Dual Flender gearboxes, - Shell reconditioned.
22' x 38' Metso Ball Mill with 13400 HP, (2) 6,700 HP motor, 680 TPH hard ore, 975 TPH soft ore, Unused, 2007
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Year: 2007
Unused surplus Metso Ball Mill, - Two available, - Manufactured in 2007, - Motor: Two TECO 6,700 HP induction motors, - 6 pole - 10,000 volt, - Wound rotor motors, - Processing capacity:, - Hard ore: 680 tons/hour, - Soft ore: 975 tons/hour.
22' x 41' Metso, Ball Mill with 13400 HP, (2) GE 6700 HP, Shell in 4 Sections, 2013
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Year: 2013
Unused surplus 22 x 41 ft ( 6.7 x 12.5 m) Metso ball mill with 13,400 HP (10,000 Kw), - Motor: Two GE 6,700 HP (5,000 Kw) motors, - Manufactured in 2013, - Bull gear: 274 tooth helical gear. 4 pieces, with an 851 mm face, - Pinion gear: 19 teeth - Liners not included, - Shell in 4 sections.
24' x 8' Hardinge, SAG Mill with 3000 HP motor, 2 Flender gearboxes, Liners quoted separately
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hardinge
- 2 Flender gearboxes, - Liners quoted separately, - 3,000 HP GE synchronous motor, - Mill is disassembled and in storage.
24' x 9' Boliden Allis, SAG Mill with 3000 HP motor, shell in 1 section, Steel liners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Boliden Allis
24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor, - Mill shell in 1 section, - Inching drive, 3 piece, - Feed and discharge ends, - Shell and discharge liners, - Discharge end drive, - Trunnions, and trunnion lube system, - Bull gear: 332 tooth 0.5 m gear, - Pinion gear: 20 ...more
30' x 7' Allis-Chalmers, SAG Mill components with 4079 HP motor, 200 RPM, Lube Units
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allis-Chalmers
Allis Chalmers 30 x 7 ft SAG, - Westinghouse AC brushless synchronous motor with spare stator:, - 4079 HP (3000 kW), - 200 RPM - 3300 V, - 50 Hz Mill includes:, - Bull gear - Pinions, - Lube units, - Slide shoe bearings, - Liner handler, - Inching drive.
32' x 12' Hardinge Koppers (Metso), SAG Mill 6800 HP, (2) 3400 HP GE motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hardinge
32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW), Two GE wound rotor induction motors:, - 3400 HP, - 710 RPM, - 4000 V, - Includes motor starter., - Includes lube system and temperature sensors., - Falk enclosed gear drive reducers., - Pinion assemblies., - Girth gear., - Drawings available., - ...more
36' x 17' FLSmidth, SAG Mill with 18350 HP, Braking system, Complete liner package, Unused
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth
- Unused surplus FLS Fuller-Traylor SAG mill, - ABB brand 13,500 kW (18,350 HP) drive, - Wrap around style drive motor, - Braking system, - Complete liner package, - Feed chute, - Hydraulic jacking system, - Specialty tools package, - Trommel screen on discharge end.
36' x 20.5' Metso, SAG Mill with 20100 HP Gearless Drive, Complete w/ control rooms and transformers, Unused
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
- 10.9 x 6.2 meter shell, - 20,100 HP (15,000 kW) Gearless Drive, - 50 Hz ABB motor, - Complete with control rooms and transformers, - mill was part of a cancelled project, stored to manufacturer, Estimated processing capacities:, - 1,625 TPH moderate ore, - 1,300 TPH hard ore, - 1,950 TPH soft ore.
36' x 23' Metsom SAG mill with 20100 HP, 2 motor, no liners, Unused
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Unused surplus 36 x 23 ft Metso SAG mill with 20,100 HP (15,000 kW), - Two GE 10,000 HP motors: 60 Hertz, - Bull Gear: Helical, 334 tooth, 3 ft face, - Pinion: 18 tooth, - No liners, - Drawings available for mill and motor.
Hydraulic Grinding Mill Inching Drive, 2:1 SF
Seller: D'Angelo International
Location: Bellingham, WA
Hydraulic Grinding Mill Inching Drive Mechanically connects to the non-drive end of the primary pinion, A flanged hub on the output shaft of the reduction unit slides over to bolt to the existing hub on the pinion shaft., The drive package consists of a 3 phase hydraulic power unit, all necessary control valves and ...more
Steel grinding balls
Seller: D'Angelo International
Location: Bellingham, WA
- Used steel grinding balls, - 3 inch minus, majority are 1.5-2.5 inches, - Cleaned and stored in barrels, - Ready for shipment, - Large quantity available.
Two Pump Hydrodynamic Grinding Mill Journal Bearing Lubrication and Lift Unit
Seller: D'Angelo International
Location: Bellingham, WA
Base mounted nominal 150 gallon capacity reservoir complete with a full containment drip tray., - Electric immersion type oil heater c/w integral thermostat., - Shell & tube type heat exchanger water: oil complete with water modulation valve, - Suction strainers for each lube and lift pump, - Oil level sight ...more
30" x 40" Metso #C100, jaw crusher, 490 STPH, 39" x 165" vibrating grizzly feeder
Category: Jaw Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: C100
- Available now, - Electrical panel included, - 50 Hz crusher duty motor included, - Jaw dies and cheek plates in good condition, - 1 x 4.2 meter babbittless vibrating grizzly feeder with steel frame included:- Feed opening: 1000 mm x 760 mm (40 x 30 inches), - Weight 23,000 kg, - Capacity: 125 - 490 standard ...more
42" x 55" Metso Nordberg #C140, Jaw Crusher, 33" max feed size, 325-840 TPH
Category: Jaw Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: C140
- Metso C140 jaw crusher: 42 x 55 inch opening, - Recently removed from service, - Available for inspection or shipment, - Operated at a cement facility crushing limestone, - Includes flywheels and guarding, - Recently serviced before shutdown, - 250 HP motor; 1200 RPM, 460 V, TEFC, Machine :, - Feed opening: 42 x 55 ...more
42" x 55" Metso #C140, Jaw Crusher, hydraulic adjustment system, refurbished
Category: Jaw Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: C140
- Refurbished Metso C140 jaw crusher, - Hydraulic adjustment system, - Backing plate behind fixed jaw, - 99,000 lb shipping weight, - No lubrication system included, - 250 hp motor available separately, Includes selection of spare parts and liners.
44" x 48" Sandvik Jaw Crusher Plant, 200 HP, 330-735 STPH, 48" x20' vibrating grizzly feeder
Category: Jaw Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Sandvik
44 X 48 SANDVIK PRIMARY JAW CRUSHING PLANTIncludes the following:-44 x 48 in. Primary jaw crusher-Sandvik 1211 HD Jawmaster-200 HP motor-Capacity: 330 – 735 STPH-48 in. x 20 ft. Vibrating grizzly feeder (VGF)-Elruss step deck feeder-18 cu-yd Hopper-34 cu-yd Hopper extension to handle CAT 769 truck-Rammer Hammer ...more
63" x 90" FLSmidth Gyratory Crusher, steel shell, new condition, unused
Category: Jaw Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth
- Unused crusher, - Manufactured for a cancelled project- Steel shell, - AR steel plate shell liners, - Bar-type spider, spider cap, and shields, - Forged steel mainshaft, - Steel mantle and concave liners, - Dust and oil seals, - Cast steel eccentric, gear, and pinion set, - Bottom plate, - Countershaft assembly, - ...more
7.5 Ton, Timberland Mine Hoist, unused surplus, 15000 lb line pull, 2 drum balanced load over under, 48" dia. drums, unused
Category: Mine Hoists
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Timberland
- Unused Surplus Mine Hoist, - Manufactured by Timberland, - 2 drum balanced load over under, - 48 in diameter drums, - Working Line Pull 15,000 Lbs, - Max rope speed 1,000 fpm, - Rope capacity 2,256 ft per drum, - Rope Dia. 1 ", - Skip Payload 6,600 Lbs, - Maximum personnel carrying capacity: 1,200 lbs, - Breaking ...more
33 Ton, ASEA, Single Drum Mine Hoist, 12' x 6.5', Type HTDE-144 inch, 2000 FPM, 1.75" diameter rope
Category: Mine Hoists
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Asea
12 x 6.5 ft (4 x 2 m) ASEA single drum mine hoist, – Type HTDE-144 inch, – ASEA 2,100/4,080 kW, 1000 VDC drive hoist motor, – 2,000 feet per minute, – 3,000 foot depth, – For 1.75 inch diameter rope, – 66,000 Lbs. maximum static rope stress, – Double disc brakes on drum with ...more
Miscellaneous Construction Equipment
1 Result
Rock Breaker Hammer
Category: Miscellaneous Construction Equipment
Seller: D'Angelo International
Location: Bellingham, WA
- Allied Rammer S82 (Sandvik).
Plate and Frame Filter Presses
18 Results
47" Durco filter press, 80 plates, non-gasketed plates, 95 cu.ft. filter volume, rebuilt
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Durco
- Durco-style plate and frame filter press, - Unit to be refurbished prior to shipment ( below), - 1200 mm plates, - 80 plates, - Non-gasketed plates, - 95 cu ft filter volume, - Center feed with 4-corner return, - Automatic hydraulics, Reconditioned filter presses are supplied with new cloths, cleaned plates, new ...more
47 J & T Technologies plate & frame filter press, 150 cu.ft. capacity, 120 non-gasketed plates
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: J & T Technologies
1200 mm J & T Technologies plate and frame filter press, - Shown as is, to be supplied fully reconditioned, - 150 cubic foot capacity, - 120 non-gasketed plates, - Automatic hydraulics, - Dual-line top and center feed, - Overhead beam frame, Offered Fully Reconditioned with 30 Day Warranty.
47" JWI Plate and Frame Filter Press, 40 cu.ft., 1200 mm plates, non gasketed, 31 plate currently
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Jwi
JWI Plate and Frame Filter Press, - Supplied fully refurbished with warranty and test run, - 1200 mm plates, non gasketed, - 31 plates currently, - 40 cu ft filtration volume with current configuration, - Automated hydraulics, - 4 corner return lines, - Center feed line, - 1-3-1 push button operation, - Heavy duty ...more
47" Perrin filter press, 25 cu.ft., 26 plates, polypropelyene, 4" flanged feed, 2" corner return
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Perrin
- Plate and frame filter press, - Supplied refurbished with warranty, - Manufactured by Perrin, - 1200 mm plate size, - 25 cu ft capacity, - 25 mm cake thickness, - 650 sq ft filtration area, - 26 plates, polypropelyene, - 4 inch flanged feed, - 2 inch corner return, - Automated hydraulic closing squeeze and return, - ...more
48" x 48" Ascension #EP1200/32-40, filter press, 40 chambers, 42 polypropelyene plates, 50.8 cu.ft., 961.8 sq.ft.
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ascension
Model: EP1200/32-40
- Model number EP1200/32-40, - 40 chambers, 42 polypropelyene plates, - 48 x 48 in plates, - Polypropylene filter cloth, - 32 mm cake thickness, - One 4 inch outlet, Two 4 inch outlets, - 50.8 cubic foot filter volume, - 961.8 sq ft of filter area, - 100 PSI design pressure, - Manufactured by Ascension (Durco).
48" x 48" Perrin #200-S-48, Filter Press, 106 Polypropylene non-gasketed recessed plates, 225 PSI, 2707 sq.ft., 135 cu.ft.
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Perrin
Model: 200-S-48
- Model number 200-S-48, - 106 Polypropylene non-gasketed recessed plates, (5) eye, center feed design, 2 3/4" thick, manufactured by lenser, - Rated 225 psi filter pressure, 2707 sq. ft. filter area, 135 cu. ft. cake capacity, - (17) open delivery plates, - Hydraulic press closure with hydraulic power unit, - ...more
56" x 75" Hypack, 1200mm Gasketed Filter Press Plates, 70 cu.ft. x 90 cu.ft. capacity
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hypack
- 1200mm Gasketed Filter Press Plates, - 56 x 75 Size Press Plates, - 70 Cubic Foot x 90 Cubic Foot Capacity, - 21 ft. Long x 6 ft. Wide x 7 ft. Tall, - Automatic Hydraulics, - Center Feed with 4 Corner Return, - 1-3-1 Button Design for Air Blow Down, - Semi-automatic Plate Shifter, - To be Supplied fully ...more
57" x 57" JWI, Recessed Plate Filter, 108 polypropylene recessed #4L78 plates, 3784 squaring ft., 194 cu. ft.
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Jwi
Model: 4L78
57 x 57 in (1450 mm) JWI Recessed Plate Filter, - 108 polypropylene recessed #4L78 plates appox. dimensions (in): 57 wide x 57 tall x 2.5 thick, (m): 1.4 wide x 1.4 tall x 0.06 thick., - Top center feed eye and four corner filtrate eyes., - Estimated 3784 sq ft filtration area., - 32 mm cake thickness., - Estimated ...more
59" Edward Edwards plate & frame filter press, 210cu.ft., 120 non-gasketed plates, steel fr.
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Edwards
- 1500 mm Edward Jones Plate and Frame filter press, - 210 cubic foot capacity, - 120 non-gasketed plates, - Automated hydraulics, - Heavy duty steel frame, - Removed and ready to refurbish.
59" JWI Filter Press, ready to refurbish, 125 cu. ft. capacity, 63 plates, top feed, 4 corn return (2 available)
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Jwi
- JWI Used Filter Press, ready to refurbish, - Two units avialable, - 125 Cu Ft Capacity, - 63 plates, - 500 mm plates, - Top feed, - 4 corner return, - Plates are non-gasketed, - Press includes automatic hydraulics with push button control, - Unit to be supplied fully refurbished.
59" Larox Larox Outotec #FFP1516, plate and frame filter press
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Larox Outotec
Model: FFP1516
- Unused surplus Larox Outotec plate and frame filter press, - FFP1516 model, - Immediately available from storage, - Fast opening and closing velocity for short cycle time, - Plate and frame style press, - 5 step operating sequence: filtration, pressing, air dry, cake discharge, cloth flushing, - Includes cloth ...more
59 Met Chem/Hoesche, plate and frame filter press, 195 cu.ft., non-gasketed, 110 plates, Hydraulic system
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Met Chem
- 1,500 mm non-gasketed plates, - 110 plates, - Plate and frame press, - Hydraulic system, - Hyundai crown triton motor, - Reconditioned in 2016, - 195 cubic feet, - Removed and ready for inspection and shipment.
59" Perrin Filter Press, 1500mm plate size, Offered refurbished with 30 day warranty, (2 available)
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Perrin
- 2 Perrin brand filter presses, - Offered refurbished with 30 day warranty, - 2 units available, - 1500 mm plate size, - 100 plates per filter, - 165 cubic foot cake capacity, - Non-gasketed plates, - 30 mm cake thickness, -Automated hydraulics, - Dual center feed with 4 corner return, - Plate shifter.
59" x 59" U.S. Filter #1500N32-77-150SYLC, J-Press, 150 cu.ft., 100 psi, 2003
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
Model: 1500N32-77-150SYLC
Year: 2003
59 X 59 in (1.5 x 1.5 m) US Filter J-Press, - 77 59 x 59 in (1.5 x 1.5 m) recessed polypropylene plates, 2.625 in (6.6 cm) thick, - Model # 1500N32-77-150SYLC - J-press type, - 150 cubic foot cake capacity, - 100 psi maximum feed pressure, - 100 psi air supplied pressure, - 3300 hydraulic clamping pressure, 3700 psi ...more
59" U.S. Filter plate & frame filter press, 210 cu.ft., 120 non-gasketed plates, automatic hydraulic
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
- 1500 mm plate and frame filter press, - Manufactured by US filter, - 210 cubic foot capacity, - 120 non-gasketed plates, - Automated hydraulics, - Heavy-duty steel frame for mining and industrial applications, - Offered fully reconditioned with 30 day warranty.
59" x 59" Dry Vac Membrane Filter Press, 3500 sq.ft. 295 cu.ft., polypropylene plates, 1 43 4-eye, Hydraulic drive
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
- 3500 sq. ft. (325 sq. Meter) filtration area, - 295 cubic foot cake capacity, - 143 4-eye, 1500mm x 1500mm polypropylene plates, - Plate shifter, - Control panel, - Hydraulic drive, - Water manifold.
JWI Plate and Frame Filter Press, 50 cu.ft., 1200 mm plates, gasketed, 41 plate currently
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Jwi
JWI Plate and Frame Filter Press, - Supplied fully refurbished with warranty and test run, - 1200 mm plates, gasketed, - 41 plates currently, - 50 cu ft filtration volume with current configuration, - Automated hydraulics, - 4 corner return lines, - Center feed line, - 1-3-1 push button operation, - Heavy duty metal ...more
Outotec Larox #PF15-30/35, filter press, 12 filter plates, control panel, unused
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
Model: PF15-30/35
- Model PF15 30/35 Larox filter press, - Unused surplus from cancelled project, - Manufactured by Outotec, - Includes control panel, pressing water station, and misc process piping, - 1.8 m3 chamber volume, - 12 filter plates, - 900 x 1750 mm plates, - Cloth width: 1.05 meters, - Immediately available, - In factory ...more
Portable Air Compressors
1 Result
1600 cfm, 100 psi, Ingersoll-Rand, portable compressor, 435 HP, diesel, rebuilt 2008
Category: Portable Air Compressors
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ingersoll-Rand
Ingersoll Rand Portable Compressor, - 1600 cfm, 100psi, - Rebuilt in 2008, excellent running condition, - 6100 hours, - 435 HP Cummins Diesel Engine, NTA855C, - 180 gal fuel tank, - Manufactured 1992, - Dimensions: L 191 in x W 89 in x H84 in, - Weight: 15,800 lbs, - Complete manual and drawings available.
Pressure Leaf Filters
4 Results
200 sq.ft. U.S. Filter, Auto Jet Pressure Leaf Filter, Stainless Steel, 100-120 mesh screens, 2.5" and 3.5" Inlet, 6' ' discharge
Category: Pressure Leaf Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
- Made by U.S. Filter Company, - Auto Jet Self Cleaning (Rotating Leaves), - Stainless Steel, - 200 square foot volume, - 100-120 mesh screens, - Insulated for chill filtering. 16 each 34" rotating leaves, - Quick opening head, - 2.5" and 3.5" Inlet and 6'' diameter discharge, - 1/2 hp Duty Master Motor 1725 ...more
300 sq.ft. U.S. Filter #30, Auto Jet Leaf Filter, Self cleaning, 316S/S, 25 cu.ft., 150 PSI at 200F, 10" discharge
Category: Pressure Leaf Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
Model: 30
- 300 Sq Ft pressure leaf filter, - Auto Jet, - Made by US Filter, - Self cleaning, - 316 stainless steel, - Approximately 25 cubic foot capacity, 700 gallons, - 54 x 60 inch drum, - 150 PSI and 200F rating, - 10 inch discharge, - Internal spray nozzles, - 3/4 HP chain drive, - Vertical leaf, - Flanged and bolted head.
1,300 sq.ft. U.S. Filter, Pressure Leaf Filter, Auto Jet, 10" drain, 316 Stainless Steel,
Category: Pressure Leaf Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: U.S. Filter
- US Filter Pressure Leaf Filter, - Auto Jet, - 1,300 square foot filtration area, - MAWP 150/FV at 400 deg. F, - MDMT -20 deg. F at 150 PSI, - Shell is 4.5 x 15 ft, - Inlet (2) 3 inch, outlet 6 inch, - 3 inch spray header, - 10 inch drain, - Material: 316 Stainless Steel, - No elements, - Requires 48 inch filter ...more
Larox #PF12.5, vertical pressure filter, skid mounted, 8 chamber press, Hydraulics, PLC control panel
Category: Pressure Leaf Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Larox
Model: PF12.5
- Outotec Larox vertical pressure filter, - Model PF12.5, - Skid mounted, - 8 chamber press, - Hydraulics, - PLC control panel.
Process Plants - Refining, Gas Processing and Petrochemical
1 Result
Shotcrete Plant, 1500 cu.ft./hr, for Pre-Mixed Concrete Designed, Unused
Seller: D'Angelo International
Location: Bellingham, WA
Unused Shotcrete Batch Plant for Pre-Mixed Concrete Designed to be operated continuously 24/7/365, The shotcrete system will receive a dry, premixed shotcrete blend via tanker truck., The truck will deposit shotcrete to the loading screw conveyor via a drive overloading arrangement., The loading screw conveyor will ...more
GIW cyclone feed pumps, 6x4, 30 HP Toshiba motor, Ni-hard casing & internals (6 available)
Category: Pumps - Miscellaneous
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Giw
- Package of GIW cyclone feed pumps, - 6x4 in pumps, - 30 HP Toshiba motors, - Ni-hard casing and internals, - Recently removed from closed plant, - 6 units available, - Belt drives with guarding.
Metso, tailings pumps, 6x4, 100 HP motors, belt drives w/guards
Category: Pumps - Miscellaneous
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
- Package of Metso tailings pumps, - Manufactured by Svedala (now Metso), - 6x4 in pumps, - 100 HP Motors, - Belt drives with guard, - Recently removed from closed plant, - 8 units immediately available, - minimum order 2 units.
FLSmidth/Loesche, High Pressure Grinding Roll Mill, 3 roller mill, 1250 HP, Versatile, 130 TPH
Category: Roll Mills
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth/loesche
FLSmidth/Loesche High Pressure Grinding Roll Mill, - 1250 hp, three roller mill, installed, - Versatile, integrated drying, grinding and classification, - For raw meal cement, cement blending or slag grinding, - Three spare rolls, - Spare gearbox, - Miscellaneous maintenance stock, - 125 - 130 TPH throughput.
7' x 16' Agglomerator, skid mounted, 8" W rollers, roller guards, discharge trommel, motor & gearbox chain drive
Category: Rotary Drum Dryers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Agglomerator
- 7 x 16 ft Agglomerator, - Skid mounted, - Motor and gearbox chain drive, - Motor-gearbox adjustable steel baseplate, - Used gearbox included, single reduction parallel shaft, - 8 in width rollers, - Roller guards, - Discharge trommel.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
1300 cfm, 132 psi, Atlas Copco #GA315, air compressors, 480 V., refurbished, (3 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Atlas Copco
Model: GA315
Atlas Copco 1300 CFM Air Compressors, Model GA315, Three available, - Input Power: 275 kW, - Voltage: 480 (3 Ph), - Max. Working Pressure: bar (e) 9.1; 132 psi, - Cooling: Air, - Year: 1998, approx. 7,500 hrs, - Speed: Variable, - Air dryer included - Atlas Copco, - Excellent condition. Remanufactured in 2018., - ...more
Rotary Scrubbers
1 Result
Rotary Scrubber on Steel Skid, 6' x 10', 12" x 4" steel channel frame, 91 HP, 480 V., 1784 RPM, Fluid drive coupling to belt drive
Category: Rotary Scrubbers
Seller: D'Angelo International
Location: Bellingham, WA
- 6 ft diameter x 10 ft length rotary scrubber, - Skid mounted with rubber tire drive, - Rubber liners with rubber lifters, - 12x4 inch steel channel frame, - 19 inch infeed, - 43 inch discharge, - Includes one spare set of roller tires, - 91 HP electric motor: 480V 1784 RPM, - Fluid drive coupling to belt drive, - ...more
Rotary Vacuum and Pressure Filters
2 Results
754 sq.ft. Rotary Drum Vacuum Filter, 12' x 20', Drum w/ 20 drainage deck sections, 2013
Category: Rotary Vacuum and Pressure Filters
Seller: D'Angelo International
Location: Bellingham, WA
Year: 2013
12 x 20 ft (3.6 x 6 m) Rotary Drum Vacuum Filters, -Manufactured in 2013, - Includes receiver, moisture trap, air blower, screw conveyor, and skid, - 4 units available, - 754 square feet of filter area, - TEFT 230/460 Volt motor: 3 Phase, 60 Hertz, - Drum with 20 drainage deck sections supported by two trunnions, - ...more
Custom Manufactured Scraper Discharge Rotary Drum Vacuum Filter, 10' x 12', 304 Stainless Steel Drum
Category: Rotary Vacuum and Pressure Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Custom
- 10 Foot Diameter x 12 Foot Face, - 304SS Drum: All new construction, 24 Sections, 17” Valve End Trunnion, 23-1/2” Drive End Trunnion, - Vat: All new construction, Epoxy Painted Carbon Steel, Rubber Lined, - Agitator: All new construction, Carbon Steel, Rubber Lined, Rocking Rake Style with Pivot ...more
Screens and Sifters
2 Results
Derrick #SG44, 5-Deck Sizer Screen, includes flow dividers (2 available)
Category: Screens and Sifters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Derrick
Model: SG44
- Two Derrick 5-deck sizer screens, - Removed and available now, - Includes flow dividers, - 5 screening decks, - Made in USA, - Ideal for fine screening and dewatering, - Includes vibrating motor.
Lippmann #LS520, 3-Deck Track-Mounted Screening Plant, like new condition, 2022
Category: Screens and Sifters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Lippmann
Model: LS520
Year: 2022
Lippmann LS520 3-Deck Track-Mounted Screening Plant, -Like new Condition, -Year: 2022, -5 x 20 (1524 x 6096 mm) screen box, -3 decks that provide 4 distinct product sizes, - 48 in. feed conveyor, - 14 ft. (4267 mm) static grizzly feed opening, - Hydraulic screenbox linkage system. Allows greater accessibility for ...more
Ash Pump with 100 HP (74 kW) motor, Type B-6-6, (3 available) units
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ash
Type B-6-6 Ash Pumps with 100 HP (74 kW) motor, - Three units available..
FLSmidth #Krebs-RM250 millMAX Slurry Pump, stored indoors, rebuilt
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth
Model: KREBS-RM250
FLSmidth Krebs RM250 millMAX Slurry Pump-Rebuilt pump in good condition, - Bare pump, - Stored indoors, - Immediately available, millMAX Design which includes:, -Increased wear life, -Lower power consumption, -Increased mill throughput, -More consistent hydrocyclone separations, -Reduced cost-per-ton pumped, -Great ...more
Galigher Style Series 1000, vertical slurry pump, totally sealed bearings, bottom box & top plate coated in vulcanized rubber, new
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 1000
- Galigher Style pumps interchangeable with Series 1000, - Totally sealed bearings, - Bottom box and top plate coated in vulcanized rubber, - Semi-open impeller coated with abrasion-resistant polyurethane, - 4140 steel shaft, Belt guards, - Supplied with one coat primer and two coats machine enamel, - Motors, sheaves ...more
Galigher Style Series 5000, vertical slurry sump pump, natural rubber wear parts, heavy duty bearing assembly, new
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 5000
- Galigher style vertical sump pump, - Interchangeable with original Galigher pumps, - 5,000 series heavy duty pumps, - Natural rubber wear parts, - Heavy duty bearing assembly and mechanical components, - Belt guard and motor baseplate, - Discharge pipe, - Pulley, motor, and belts available separately, - Made in ...more
Krebs #D6B-12-838 Cyclone, (8 available) units
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Krebs
Model: D6B-12-838
3 units available, SPARE PARTS (Additional Cost):, - 4 each - Inlet Head Liners, - 4 each - Liner Top Cover Plate, - 4 each - Cylinder Liner, - 4 each - Skirt - Urethane, - 4 each - Apex Insert, - 4 each - Urethane Skirt, - 10 each - Inlet Adapter, - 10 each - O Flow Adapter, - 3 each - Inlet FLGD Adapter, - 4 each - ...more
Linatex Slurry Pumps, 10 x 10 in
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Linatex
10x10 Linatex Slurry Pumps, - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves.
Metso #SRL-8x6 CHR Slurry Pump With Hastelloy, Denver type pump, 8" x6", new
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso
Model: SRL-8X6
8 x 6 CHR Metso SRL With Hastelloy Slurry Pump, - New in the crate, - Denver-style pump, - 8" x 6 ", - Model: SRL, - Includes corrosion-resistant nickel alloy Hastelloy, - Motor available separately, - Bare pump immediately ready to ship.
Nash, Ash SRH Hydroseal Pumps, 22" x 20", Tailing Pond Pumps, Variable speed
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Nash
22" x 20" Ash SRH Hydroseal Pumps, - Tailing Pond Pumps, 1996, - For 1,000 HP, Rubber impellor, Rubber lined, - Variable speed, - Four pumps, two spare barrels and some spare impellers, - No motors or bases.
Warman #AH Horizontal Slurry Pumps, 6" x4" size, includes motor & base
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Warman
Model: AH
6x4 Warman Horizontal AH Slurry Pump with Motor and Base, -Unused Surplus Pump, -Includes Motor and Base, -Size: 6 " x 4", -Model: AH.
Warman #AH Horizontal Slurry Pumps, 8" x6" size, on steel skid, unused surplus (4 available)
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Warman
Model: AH
Warman 8x6 Horizontal AH Slurry Pumps, - Surplus (never installed) Pumps in great condition, - 4 Available, - Size : 8" x 6", - Model: AH, - Manufactured by Weir Minerals, - Pump mounted on steel skid, - Belt guard, - Stored indoors, Includes the following WEG motor:, - 3 phase, - 74 HP, - 460 Volt, - 60 Hz, - 364/5T ...more
Equivalent in Performance with Type AH Horizontal Slurry Pumps, cetrifugal seal, cast casings & pedestal base
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
- Centrifugal seal, - Cast casings and pedestal base, - Equivalent to series AH pump, - Liners are pressure molded vulcanized rubber, - Impellers are rubber, polyurethane and steel are available, - Fabricated over-seat motor base and belt guard, - Supplied with one coat primer and two coats machine enamel, - ...more
Squirrel Cage AC Electric Motor
9 Results
60 HP 1185 RPM Reliance, Frame 404T, DP, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Reliance
Frame: 404T
Energy Efficient Duty Master Motor, - 60 HP (45 kW), - 460 V, - 3 Ph, - 60 Hz, - Drip proof enclosure, - Frame 404T, - Thermistors, - Heater, - Test run at 480 V, - Stored indoors, - Cleaned, painted, packed, and ready for transport.
60 HP 1185 RPM Reliance, Frame 404T, DP, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Reliance
Frame: 404T
- 460v/3ph/60hz, - Drip proof enclosure, - Frame 404T, - Thermistors, - Heater, - Test run at 480v.
150 HP 1790 RPM Worldwide, Frame 445T, TEFC, 1.25 service factor, 230/460 Volts (2 available)
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Worldwide
Frame: 445T
- Unused Worldwide electric motor, - Surplus from Cancelled project, - 150 HP, - 445T frame, - 1790 RPM, - TEFC, - Continuous duty, - 60 Hz, 3 Ph, - 349/175 amps, - SF 1.25, - PF 0.84, - Two units available.
250 HP WEG, TEFC, common voltages & RPMs, new
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Weg
New unused WEG motors up to ~250 HP in stock, - New motors, - Common voltages and RPM's available, - TEFC, - Normal or Severe/Crusher duty, - Drawings and manuals included, - Warrantied, - Common applications: jaw crusher motor, cone crusher motor, ball mill motor, rod mill motor, crusher motor.
300 HP 1191 RPM Reliance, Frame BC5008Y/18EC 5008Y, PROT, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Reliance
Frame: BC5008Y/18EC
- 460 V, - 300 HP (220 kW), - 3 Ph, - 60 Hz, - PROT enclosure, - Frame BC5008Y/18EC 5008Y, - Thermistors, - Heater, - Test run at 480 V.
300 HP 1191 RPM Reliance, Frame BC5008Y/18EC-5008Y, PROT, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Reliance
Frame: BC5008Y/18EC-5008Y
- 460v/3ph/60hz, - PROT enclosure, - 1191 RPM, - Frame BC5008Y/18EC 5008Y, - Thermistors, - Heater, - Test run at 480v.
800 HP 1785 RPM Teco Westinghouse, Frame 6808B, TEFC, 1.15SF, 4000 Volts
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Teco Westinghouse
Frame: 6808B
Unused surplus TECO Westinghouse motor, - 800 HP, - 1785 RPM, - 4,000 V, - 99 amps, - 3 Ph, 60 Hz, - 1.15 Service Factor, - TEFC, - AEHGXW type, - 6808B frame.
3000 HP 900 RPM Hitachi, Frame 560LM, weather protected enclosure type 2,1.0SF, continuous duty, unused, 4000V.
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Hitachi
Frame: 560LM
3000HP 900 RPM 4000 VAC Unused Surplus Hitachi Induction Motor, - In Stock Ready to Ship, - 3000 HP, - 885 RPM, - 4000 VAC, - 388 Amps, - 3 Phase, - 60 Cycle, - 8 Poles, - Frame 560 LM, - Type EFAN, - Form KK, - Class F Insulation, - Enclosure WP2, - Service Factor 1.0, - Continuous Duty, - NEMA MG1-1993, - Ambient ...more
8100 HP 1187 RPM Teco Westinghouse, Frame 10022, weather protected enclosure type 2, 13200 Volts,
Category: Squirrel Cage AC Electric Motor
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Teco
Frame: 10022
- 8,100 HP TECO Westinghouse induction motor, - 6,000 kW, - 1187 RPM, - 60 Hz, 3 Ph, - 13200 volts, - Frame 10022, - Type HAC, - 1.0 service factor, - Enclosure: WP2- Multiple units available, unused surplus or good used EOK.
Stainless Steel Tanks and Vessels
2 Results
Rubber Lined Agitation/Conditioner Tank, 8 x 8 ft tank (other sizes avail), A36 Steel, New construction
Category: Stainless Steel Tanks and Vessels
Seller: D'Angelo International
Location: Bellingham, WA
- 8 x 8 ft tank (other sizes available), - New construction, - Constructed from A36 Steel, - Tank interior lined with 1/4 inch of rubber, vulcanized, - Rubberized wear and interior parts in contact with mineral slurry, - Includes bridge, baffles, and mechanism, - Discharge box with flanged outlet, - Drain outlet with ...more
Bare agitation & mixing tank, 20' height, 19' diameter, 160 cubic meter volume, A36 steel plate
Category: Stainless Steel Tanks and Vessels
Seller: D'Angelo International
Location: Bellingham, WA
- New manufacture bare agitation and mixing tank, - 20 ft height, - 19 ft diameter, - 160 cubic meter volume, - A36 steel plate, - Bolt together tank for rapid transport and assembly.
Synchronous Motor Controls And Starters
2 Results
1250 HP Allen-Bradley, Synchronous Motor Starter, in steel cabinet
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Allen-Bradley
- Electric synchronous motor starter in steel cabinet, - For 1,250 HP Motor, - Manufactured by Allen Bradley.
1250 HP Starter for a Synchronous Motor to power a grinding mill
Seller: D'Angelo International
Location: Bellingham, WA
Starter originally paired with a 1,250 HP synchronous motor to power a grinding mill.
33' Propel, Unused Surplus Propel Thickener
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Propel
-New unused surplus thickener-Manufactured by Propel-In Excellent Condition-32.8 feet or 10 meter diameter-Side Wall depth of Tank, 2.7 m-Floor Slope, 15°-Drive System Hydraulic, 3.7 kW-Volume of Tank, 205 m3-Feed well, 2.2 m Dia.-Feed pipe / Drain, 200 NB Dia.-Rake Arm Lift, 300 mm-Rake Speed, 0.13 to 0.3 ...more
35' Tailing Thickener, approx 50' H, 5 HP, 890 RPM, 460V., Rake and Bridge assembly
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
- 35 ft diameter tank, - Tank height: approx 50 ft, - 5 HP drive, 890 RPM and 460V, - Rake assembly, - Bridge assembly, - Removal and loading additional.
50' High Rate thickener, High rate of settling equivalent to 60 or 70 ft diameter
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
FLS Thickener, - 50 ft (15.25 meters) diameter High Rate thickener, High rate of settling equivalent to 60 or 70 ft diameter, - 240,000 ft lbs of Torque suitable for tailings thickener, - Mechanism, shaft, feed well, rakes and above ground leg supported steel tank, - used only 3 years, - GE 15 HP drive motor, 460V, - ...more
60' diameter x 10' deep (18mx3m) Thickener Tank Assembly, 1/4" thick ASTM A-36 steel
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
- New, unused surplus, - Constructed of 1/4 in. thick ASTM A-36 steel, - Complete with floor and sidewalls, - Originally designed for ~200 m3/hr flow (1,000 gpm), - Launders easily modified for higher flow capacity, - Complete tank, ready to ship and assemble, Also available at additional cost:, - Steel support ...more
75' EIMCO, thickener mechanism, Auto lift
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Eimco
- 75 ft thickener mechanism made by EIMCO, - Auto lift, - Removed in good working condition, - Made in USA.
115' Surplus WesTech, Paste Thickener, high density material, 26' tank walls
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Westech
Surplus WesTech thickener built and never used for production.- 115 ft (35m) diameter paste thickener built by WesTech- Designed for high density material- 26 ft tank walls (8m)- Includes tank, drive, rakes, feed well, column, piping, bridge and walkway, and containerized electrical roomTank- anchored channels- 35 x 8 ...more
350' DBS #D80 EH4, Heavy Duty Thickener Mechanism, for tanks up to 350' diameter, 2 million ft/lbs torque
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Dbs
- Model D80 EH4 for tanks up to 350ft diameter, - 2 million ft/lbs torque, - Bolt in retrofit replacement for Dorr Oliver 122S3, - Available completely reconditioned with warranty.
OEM Thickener Drives, up to 300' diameter, up to 4000000ft/lb, Built to custom specifications
Category: Thickeners
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Oem
OEM Thickener Drives, - For thickeners up to 300ft dia. and torques up to 4,000,000ft/lbs, - Single or dual drive, Pier or bridge mount, w/ or w/o lift, - Built to custom or as bolt-in replacements for all standard thickener mechanisms, - Electro-mechanical or hydraulic-mechanical options available for speed reducer ...more
Tooling and Accessories - Miscellaneous
8 Results
Weir #6X500CVX10, Cyclone Clusters with manifold distributors, 10 per bank (2 available)
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Weir
Model: 6X500CVX10
- Two cyclone clusters with manifold distributors, - Weir brand model 6X500CVX10, - 10 per bank, - 2 banks available, - Used for ball mill discharge classification, - Removal and loading additional.
Rubber liners for a 3.4 x 6 m Fuller ball mill, Unused
Seller: D'Angelo International
Location: Bellingham, WA
- Unused surplus neoprene rubber liners made by Metso, - Designed for 3.4 x 6 m Fuller ball mill, - In storage, available now, - Stored in shipping container, - Available as a full set only.
Steel High-Chrome White Iron grinding mill liners, for rod and ball mills, New
Seller: D'Angelo International
Location: Bellingham, WA
- New "Steel" high-chrome white iron grinding mill liners, - For rod and ball mills, - Shell and head liners available, - Custom manufacture in North America, - Liner Drawing required for quote, - Hardware available also: Liner bolts, nuts, and washers, - 4-6 month build time.
Krebs style Cyclones, Made to Order, Fully assembled, Available in clusters with manifolds, New Unused
Seller: D'Angelo International
Location: Bellingham, WA
- New and unused cyclones made to order in Krebs and Denver styles, - Fully assembled, - Interior covered with 1/4 inch thick vulcanized rubber, - Victaulic connections for feed and discharge, - Variety of Apex and Inlet sizes available, - Spare parts packages available with minimum order, - Available in clusters with ...more
Air clutch, Eaton #38VC1200
Seller: D'Angelo International
Location: Bellingham, WA
Model: 38VC1200
Complete new and unused Eaton airflex clutch, 1- 38VC1200 Element ASSY 2 SC, 1- I.O.M Manual 1, 1 - 38VC1200 Drive hub, 1 - 38VC1200 Male reg drum, 2 - Hose assembly, 1 - 38VC1200 Spider, Inquire about other Eaton clutches available, Made in USA, Rebuild kit available: reference SKU MCC671.
Jaw Crusher Spare Pittman Assembly, for Metso #C110
Seller: D'Angelo International
Location: Bellingham, WA
Model: C110
- Spare Pittman assembly for C110 jaw crusher, - Unused surplus critical spare, - Ready for shipment, - Manufactured by Metso, - Drop in replacement part, - 34 x 44 inch jaw crusher.
Impeller and Diffuser Rubber Parts, Denver #DR24, Impellers - Natural rubber, bolt on type, 9 vane, Diffusers - Natural rubber, 16 fins, 6" deep, 2013 unused surplus
Seller: D'Angelo International
Location: Bellingham, WA
Model: DR24
- Lot of 10 Units: Denver DR 24 Impellers and Diffusers, - Impellers: Natural rubber, bolt on type, 9 vane, - Diffusers: Natural rubber, 16 fins, 6” deep, - Year of manufacture: 2013, - Condition: Unused surplus.
6 cyclone manifold, Krebs, internal rubber lining
Seller: D'Angelo International
Location: Bellingham, WA
- Krebs 6 cyclone manifold, - Internal rubber lining, - Spare cyclones, apexes, and vortexes available separately, - Immediately available from storage.
Peerless #20HH, vertical turbine pumps with 200 HP WEG motors, 460 V. (3 available)
Category: Vertical Turbine Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Peerless
Model: 20HH
- Unused surplus Peerless vertical turbine pumps with 200 HP WEG motors, - Pumps made in USA, - 3 units available, - Design rating of 1065 cubic meters per hour, - Model 20HH, - Closed impeller, - 460 V motor, TEFC.
Washer Parts - Miscellaneous
1 Result
200-250 TPH New Sand Washing Package
Category: Washer Parts - Miscellaneous
Seller: D'Angelo International
Location: Bellingham, WA
200 - 250 TPH Sand Washing Plant Package:, -Includes all major items for separation of, clean sand from fines in slurry-Attrition Scrubbers, Cyclone Bank, and Pump-Manufactured in North America, Attrition Scrubbers:-Bank of 6 scrubbers-48x48 inch tank size-Includes mechanism,shaft,propellers, housing, and motor base ...more
Water Treatment Equipment
1 Result
Water treatment plant, 367 GPM, Automatic operation, Unused
Category: Water Treatment Equipment
Seller: D'Angelo International
Location: Bellingham, WA
- Unused surplus water treatment plant designed to produce 367 gallons/minute of potable water, - Engineered for Merrill Crowe process water treatment, - Nominal flow rate: 367 GPM, - Total flow rate: 1,100 GPM, - Total detention time: 53 minutes, - Automatic operation, - In storage, available now.
Stock Equipment Co #NPG24, Weigh Feeder, 24" gravimetric limestone feeder
Category: Weigh Feeders
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Stock Equipment Co
Unused 24 inch Stock Equipment Company Weigh Feeder:, - 24 inch gravimetric limestone feeder; Model NPG24, - 196NT microprocessor control and VFD drive, - Right hand assembly, - Two-ply polyester belt, - Switches: Discharge pluggage, and material on belt, - Belt motion monitor, - Bottom dust cover, - Automated water ...more
