Century Machinery Co
1937 S Santa Fe Ave
Los Angeles, CA 90021-2917
Los Angeles, CA 90021-2917
Gold Level Dealer
Surplus Record Dealer Since 1968
Contact
Leon Dietch
213-627-2499
About
Century Machinery Co., established 1934 by Oscar Dietch, is a family ownedand operated business serving all the machinery needs for the following:
Aircraft, Auto, Lighting, Machine Tool, Fabricating, Sheet Metal and
Woodworking Industries locally and around the world, with the very best in
Pre-Owned Equipment, with in excess of 600 machines and is available for
viewing at our warehouses.
Products & Services
- Drills
- Grinders, Cylindrical & Internal
- Grinders, Surface
- Lathes
- Milling Machinery
- Presses
- Saws
- Shears
Associations & Affiliations
72 listings in 43 categories
Farnham Aircraft Roll Forming Machine #1010-EXX, 10' L x 0.8438" radius, 1/8" thickness, 1.687" dia top roll, 1.94" bottom rolls
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Aircraft Rolls
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Farnham
Model: 1010-EXX
FARNHAM FORMING ROLL, Model 1010-EX, Serial Number 17-42-17, CAPACITY:, Overall Length of Rolls. 10 feet (3,048mm), Thickness. 1/8" - 0.120" (12mm), Minimum Radius. 27/32" 0.8438″ ...more
Farnham Aircraft Roll Forming Machine #1558-E, 15' L x 5/8" radius, 0.60" material thick, 1" dia top roll, 1.6875" bottom rolls
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Aircraft Rolls
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Farnham
Model: 1558-E
FARNHAM FORMING ROLL, Model 1558-E, CAPACITY:, Overall Length of Rolls 15’ (180")(4,572mm), Radius, Minimum 0.6250" (15.875mm), Thickness 0.60" (15.24mm), ROLL DIAMETER:, Top Roll 1" ...more
Farnham Aircraft Roll Forming Machine #2015-EXXX, 20' L x 1.5" radius, 3/16" material thickness, 2.6875" dia top roll, 3.3135" bottom rolls, 5 HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Aircraft Rolls
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Farnham
Model: 2015-EXXX
FARNHAM FORMING ROLL, Model 2015-EXXX, Serial Number 4-41-8, CAPACITY:, Overall Length of Rolls. 20 feet (6,096mm), Sheet Thickness(maximum). 3/16" / 0.180" (4.572mm), Minimum Radius. ...more
1-1/2" x 1-1/2" x 3/16" Kane & Roach #50, vertical angle bending roll, pinch type, vari-speed
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Angle Bending Rolls
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Kane & Roach
Model: 50
KANE & ROACH VERTICAL ANGLE BENDING ROLLS, Size 50, Serial Number 8188, VERTICAL PINCH TYPE, ANGLES LEG OUT 1" x 1" x 3/16", Minimum Diameter 24", Smallest Angle " x " x 1/8", Minimum ...more
SMW #Space-Saver-2400, bar feed loader,.25"-4" dia round, 4"-59" bar length, Number 1" bars in tray 20, Like New
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Bar Feeders and Loaders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Smw
Model: SPACE-SAVER-2400
SMW SPACESAVER BAR FEED LOADER, Model SPAC. 2400, Serial Number 20-608/04/2006, Mfg. Date 2006, CAPACITY, BAR Minimum (Round Cross Section) 1/4"(.25") (6.35mm), BAR Maximum (Round Cross ...more
3" Wallace #500-3, pipe & tube bender, 5" non-ferrous hydraulic mandrel ext.w/oscillation, die booster
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Bar, Pipe and Tube Benders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Wallace
Model: 500-3
WALLACE TUBE, PIPE BENDER, Model 500-3, Type: Rotary Draw Serial Number 1002007, The bendeR purchased from US Government long term storage., Condition: ALL HYDRAULIC CONTROL VALVES REQUIRE ...more
Bed and Knee Milling Machines - Horizontal
1 Result
Kearney & Trecker #2CH, plain horizontal mill, 12" x50" power feed table, 3-Axis feed w/rapid, horizontal 25-1500 RPM 5 HP Power Over-Arm 150-2400 RPM 3 HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Kearney & Trecker
Model: -2CH
KEARNEY & TRECKER HORIZONTAL MILLING MACHINE, Model 2CH, Type PLAIN, Serial Number 7667, SPINDLE:, Taper50 MT, Speeds: 25, 33, 44, 58, 75, 99, 130, 170, 225, 244, 298, 400, 520, 670 ...more
Bed and Knee Milling Machines - Vertical
1 Result
Lagun #FTV-2, Vertical Mill, 10" x 55.5" power feed table, 2 HP, Vari Speed 55-4250 rpm, digital read out, Coolant, 220 Volts Single Phase
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Lagun
Model: FTV-2
LAGUN VERTICAL MILLING MACHINE, Model FTV-2 Serial Number SE-13759, THIS MILL IS SET UP TO RUN OFF 220volts Single Phase, SPINDLE:, Taper R-8, Collet Capacity ¾" (19.05mm), Quill ...more
36" Burlington #S3675R, belt grinder/sander, automatic 24" x 46" part.reciprocating table, digital read out, R & F bed,part clmp,30hp
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Belt Grinders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Burlington
Model: S3675R
36" BURLINGTON Rand Bright RECIPROCATING BED ABRASIVE BELT GRINDER, Wide Belt, Heavy Duty, Model S36X75R Date Mfg. 11-1998, 36" wide Sanding Belt, Reciprocating Bed overall size 24" x 45" ...more
2" Burr King #760, vertical belt sander, 20" W x 60" L sanding belt, 1.5 HP, 115 V., single phase, serial motor F1298
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Belt Sanders
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Burr King
Model: 760
1 – used BURR KING VERTICAL BELT SANDER/GRINDER, Model 760, Serial Number J376990, Condition: Excellent, Very Little Use, Three Wheels, THROAT ...more
36" Burlington Belt Grinder-Sander #S3675R, part reciprocating 24" x45" auto table, digital read out, Rise & Fall Bed, 30 HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Belt Sanders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Burlington
Model: S3675R
36" BURLINGTON Rand Bright RECIPROCATING BED ABRASIVE BELT GRINDER, Wide Belt, Heavy Duty, Model S36X75R Date Mfg. 11-1998, 36" wide Sanding Belt, Reciprocating Bed overall size 24" x 45" ...more
DoAll #DBW-8, Blade Welder, Grob, Powermatic, 8KVA, 6KVA, 5KVA, w/grinder & blade shear
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Blade Welders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Doall
Model: DBW-8
Inventory Reference W2287-8758, DO ALL BLADE WELDER 8 KVA, Model DBW-8, Serial Number 631721, HEAVY DUTY, K.V.A. Instantaneous 8, K.V.A. Continuous 2, AMPERAGE 20, VOLTS 440 PHASE Single ...more
C Frame Hydraulic Press Machines (Gap Frame)
3 Results
2 Ton, Apex Denison Multipress #WUA-2-TR, 3" stroke, 4-1/2" throat, 11" daylight, 11" x9" bed, light curtain, dual elect trip, mounted on Stand
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Apex
Model: WUA-2-TR
APEX DENISON C-Frame HYDRAULIC MULTIPRESS, Model WUA-2-TR, Serial Number S090387C, CAPACITY TONS 2, STROKE OF CYLINDER, Adjustable thru 3" (76.2mm), CENTERLINE OF RAM TO FRAME (Throat) ...more
50 Ton, Denison #MSC2-50, C-frame hydraulic straightening press, 17" stroke, 12" throat
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Denison
Model: MSC2-50
DENISON HYDRAULIC STRAIGHTENING PRESS, Model SC2-50, C-Frame, Serial Number 10817-2-45, CAPACITY TONS: 50, STROKE OF CYLINDER, Adjustable Total 17" (431.8mm), RAM SPEED Adjustable ...more
50 Ton, Hannifin, C-frame, 27" stroke upper ram, OH 29", also lower up-acting 4" dia ram cylinder
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Hannifin
HANNIFIN HYDRAULIC PRESS, C-Frame, Serial Number NA, CAPACITY TONS: Approx. At 5000 PSI. 40 – 50, At 3000 PSI. 24 - 30, STROKE OF CYLINDER, Adjustable thru. 27", THROAT DEPTH: ...more
Cavity Die Fluid Forming Presses
4 Results
8600 Ton, Verson Wheelon Fluid Cell Forming Press #R8600-36x92, 5000 psi, 4.5" & 6" depth within 2 trays
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Cavity Die Fluid Forming Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Verson
Model: R8600-36X92
VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS, Model 8600R-36-92, FLEX-DIE RUBBER PAD, Serial Number 20995, FLUID FORMING, CAPACITY TONNAGE 8,600, FORMING PRESSURE thru 5,000 ...more
41000 Ton, Verson Wheelon Fluid Cell Forming Press #41000R-50x164, 10000 psi, Forming Depth 6" & 10" within 2-Trays
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Cavity Die Fluid Forming Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Verson
Model: 41000R-50X164
1 – used VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS, Model 41000R-50-164, FLEX-DIE RUBBER PAD, *FLUID FORMING*, CAPACITY TONNAGE. 41,000, FORMING PRESSURE: Maximum. 10,000 ...more
ASEA Quintus Deep Draw Fluid Cell Cavity Forming Forming Press #QRF-40, Blank diameter 30.63", Draw Depth13.98", PSI 10,877, Cap.38MN
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Cavity Die Fluid Forming Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Asea
Model: QRF40
AVURE (ASEA) QUINTUS FLUID CELL FORMING PRESS, Model QRF-40, Deep Draw Cavity Die Forming Press, Serial Number L0159.1053-1, CAPACITY 38 MN, FLUID FORM UNIT: €¹“ = 800 mm ...more
Avure Quintus #QRL-63, fluid cell forming press, 42.9"-26.9" blank, 12.3" draw depth, forming pressure 9100 psi & 23200 psi, serial L4689.1000
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Cavity Die Fluid Forming Presses
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Avure Quintus
Model: QRL-63
1 – used AVURE (ASEA) QUINTUS FLUID CELL FORMING PRESS, Model QRL-63, Cavity Die Forming Press Serial Number L4689.1000-1, TWO FLUID FORM UNITS AVAIABLE WITH THIS PRESS, 1st Fluid ...more
Ex-Cell-O #174, center lapping grinder, 10.24" x 42"
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Center Lappers
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Ex-Cell-O
Model: 174
1 – used EXCELL-O CENTER LAPPING MACHINE, Model 175, Serial Number 1740423, CAPACITY, Diameter of work, Maximum. 10¼" (260.35mm), Length of work, Adjustable thru. 43" ...more
CNC Vertical Bed Mills
1 Result
Sharp #LMV-DVS, vertical mill, 9" x42" table, vari-speed, digital read out, power draw bar, 3 HP, 2003
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: CNC Vertical Bed Mills
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Sharp
Model: LMV-DVS
Year: 2003
1 – used SHARP VERTICAL MILLING MACHINE, Model LMV-DVS Serial Number Head 10927389, Serial Number Knee 20327564 Date Mfg’d 07-11-2003, J-HEAD, V-RAM, Moves in ...more
8 Ton, Dahlstrom #8TP, 4-post, 2 stroke, 4"-6" Shut Height, 9" die area, 300 RPM, air clutch & brake
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Cut-off Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Dahlstrom
Model: 8TP
DAHLSTROM 4-POSTS MECHANICAL CUT-OFF PRESS, Model 8TP, Serial Number P661, CAPACITY 8 Tons, STROKE 2" (50.8mm), SHUT HEIGHT: Adjustable 4" thru 6" (101.6mm – 152.4mm), DIE AREA 9" ...more
Die Cutting Press Machines
2 Results
20 Ton, Fipi #F510H, traveling head die cutting press, 29.5" squaring head, 51.5" travel, 25" x63.5" bed, 2000
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Die Cutting Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Fipi
Model: F510H
Year: 2000
1 – used FIPI TRAVELING HEAD DIE CUTTING PRESS, Model AF510H, Serial Number 10002557-7, Mfg. in Italy, CAPACITY ...more
25 Ton, Atom #SE25L, s.p.a die cutting clicker press, 19.75" x39.25" bed, 19.69" x24.02" upper arm, hydraulic 1.2 HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Die Cutting Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Atom
Model: SE25L
1 – used ATOM S.P.A. C-FRAME DIE CUTTING PRESS, Model SE25L – T25 (Clicker), Serial Number 25A170135, CAPACITY CUTTING FORCE: ...more
30" Max #30DVS, disc & spindle sander, 30" discs, 5 HP drive, vertical sanding spindle 1.5 HP drive
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Disc Sanders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Max
Model: 30DVS
MAX 30 inch DISC SANDER and SPINDLE SANDER Model 30DVS, Serial Number 94308, CAPACITY:, DISC SANDER: Model 30-SD, Diameter 30", Table:, Working Surface,15"FB x 38½" LR, Plus ...more
Jet #JDS-20-1, oscillating heavy duty spindle sander, 1 HP, 115V. 1 phase, tilt table, extra spindles
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Disc Sanders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Jet
Model: JDS-20-1
JET OSCILLATING SPINDLE SANDER Model OVS-10, Stock 70B410 Serial Number 401016, SINGLE VERTICAL SPINDLE, Spindle Speed 1725 rpm., Oscillating 75 strokes per minute, Length of Oscillation ...more
Max #VS-1, oscillating spindle sander, heavy duty, 1 HP, tilting table, extra spindles
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Disc Sanders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Max
Model: VS-1
30" diameter disc MAX Combination Disc and Spindle Sander, Model 30-DVS, Disc Sander 30-D has tilting table and has rise and fall vertical movement., Table working surface 15" x 38.5", Disc ...more
Disintegrators (Including Tap Disintegrators)
1 Result
Electro-Arc #1S, disintergrator, 10 KVA, 13 amps head 2DV, head rotates, 30x39.5" tbl, Col 50" ht
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Electro-Arc
Model: -1S
ELECTO ARC METAL DISINTEGRATOR, Model 1S, KVA 10, AMPS 13, TABLE SIZE 30" F-B x 39½" L-R, DISINTEGRATOR HEAD: Type Q, Rotates Left and Right of vertical 90°., Head distance from ...more
Engine Driven Welders
1 Result
Miller Trailblazer #302 CC/CV-AC/DC, 300 amp welde, 10000 watt generator, s/n LE4240, Trailer Mounted, like new, #90786
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Engine Driven Welders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Miller
Model: TRAILBLAZER-302
MILLER TRAILBLAZER GAS DRIVEN CC / CV - AC / DC WELDING & GENERATOR, Model 302 Professional Series, Stock Number 907216, Serial Number 424047, Condition: Excellent Very Little Use ...more
Feeding and Straightening Machines
1 Result
30" x .061" Coil-Matic #XHF-3012, air feed & straightener, stroke thru 12", single gripper
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Feeding and Straightening Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Coil-Matic
Model: XHF-3012
COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER, Model XHF-3012, AIR FEEDER, Stock Width 30"Maximum, Stroke Range 0 thru 12", Stock Thickness 0.061", Stroke Cycles per minute at maximum stroke ...more
8600 Ton, Verson Wheelon Fluid Cell Forming Press #8600R-36x92, 5000 psi, Forming Depth 4.5" & 6" with-in 2-Trays
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Forming Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Verson
Model: 8600R-36X92
VERSON WHEELON DIRECT ACTING HYDRAULIC Fluid Cell FORMING PRESS, Model 8600R-36-92, FLEX-DIE RUBBER PAD, FLUID FORMING, CAPACITY TONNAGE 8,600, FORMING PRESSURE thru 5,000 P.S.I., TRAYS: ...more
Horizontal Band Saws
1 Result
18" x 20" Hem #H130HM-DC, 72-400 FPM variable, digital read out, variable down feed, power in-feed, 10 HP, blade width 1.5" blade width, Serial 524196
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Horizontal Band Saws
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Hem
Model: H130HM-DC
HEM SEMI AUTOMATIC HORIZONTAL BAND SAW, Model H130HM-DC. Serial Number 524196 Year Built 1996, CAPACITIES:, Round 18", Rectangular 18" H x 20" W, BLADE:, Cutting Speeds Variable 72 thru 400 ...more
Sunnen #MBB-1600, horizontal honing machine,.060"-6.5" bore, 16" length, 1/2 HP, 115 V., loaded w/ tooling
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Horizontal Hones
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Sunnen
Model: MBB-1600
1 – used SUNNEN HORIZONTAL HONE, Model MBB-1600, Serial Number 40252, Condition: Very Little Use, CAPACITY:, Bore Internal diameter ...more
Hydraulic Hydroforming Press Machines
4 Results
6610 Ton, Avure Quintus #QRL-63, fluid cell forming press, blank 42.9"-26.9", 9100 psi & 23200 psi formikng pressure, serial #L4689.1000
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Hydraulic Hydroforming Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Avure Quintus
Model: QRL-63
1 – used AVURE (ASEA) QUINTUS FLUID CELL FORMING PRESS, Model QRL-63, Cavity Die Forming Press Serial Number L4689.1000-1, TWO FLUID FORM UNITS AVAIABLE WITH THIS PRESS, 1st Fluid ...more
8600 Ton, Verson Wheelon Fluid Cell Forming Press #R8600-36x92, 5000 psi, forming depth 4.5" & 6" with-in 2-trays
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Hydraulic Hydroforming Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Verson
Model: R8600-36X92
VERSON WHEELON DIRECT ACTING HYDRAULIC FLUID CELL FORMING PRESS, Model 8600R-36-92, FLEX-DIE RUBBER PAD, FLUID FORMING, CAPACITY TONNAGE 8,600, FORMING PRESSURE. thru 5,000 P.S.I., TRAYS: ...more
41000 Ton, Verson Wheelon Fluid Cell Forming Press #41000R-50x164, 10000 psi, forming depth 7" & 10" with-in 2-trays
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Hydraulic Hydroforming Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Verson
Model: 41000R-50X164
VERSON WHEELON FLUID CELL FORMING PRESS Model 41000R-50x168, Capacity 41,000 Tons, Two 50" x 168" Trays, Forming Depth 6 and 10", Forming Pressure 10,000 psi, 2-Tray Fill Plates, 2- Throw ...more
Cincinnati Hydroform #12-15-7, 4-post hydraulic fluid forming press, 15000 psi, flush floor mounted
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Hydraulic Hydroforming Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Cincinnati
Model: 12-15-7
CINCINNATI HYDROFORM HYDRAULIC PRESS, Model 12-15-7, Serial Number 4C1V1Y-Z, FLUSH FLOOR MOUNT, NO PIT REQUIRED, Four Post, BLANK DIAMETER, Maximum 12" (3404.8mm), DRAW DEPTH, Maximum 7" ...more
300 Ton, Pacific #300-10, hydraulic press brake, 10' overall, 76.5" between housing, 18" open/6" closed height, 12" stroke, 30 HP, 4 Way Die
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Hydraulic Press Brakes
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Pacific
Model: 300-10
1 – used PACIFIC POWER PRESS BRAKE, Model 300-10, Type HYDRAULIC, Serial Number 2309, BENDING CAPACITY:, Tons 300, Length Over-all bed 10' (3,048mm), Length between housing ...more
14" x 36" Sundstrand mag.chuck, electric, 4" H, power grip Control, AC 220-440 V. 50-60 Hz, DC 24v
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Lathe Chucks
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Sundstrand
2-SUNDSTRAND ELECTRO MAGNETIC CHUCKS, Chuck Serial Number 500-101, Control Model Power Grip, Serial Number 402-115, NOTE BOTH SOLD AS WORKING PAIR, OVER-ALL SIZE Each:, Front to Back 14" ...more
18" x 36" Electro Dynamics Magnetic Chuck x 5" H, with Magnetic chuck control
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Magnetic Chucks
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Electro Dynamics
1/8" x 8-5/8" x 8-5/8" Amada #CS-220, hydraulic power notcher, 10 ton, 10 gauge, miter guides, runs great
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Notching Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Amada
Model: CS-220
1 – used AMADA POWER NOTCHING MACHINE, Model CS-220, Serial Number 544457, CAPACITY:, Maximum 90-degree notch. 8" x 8", (219.075 mm x 219.08mm), Maximum Cutting Capacity: Mild Steel. ...more
Pipe Threaders (Includes Nipple Machines, Pipe and Tube Cutters)
1 Result
13-3/8" Harley #HT753, lead screw, receding die head, taper att, front & rear chuck, 15" thru hole, Landis Threading Chasers, hard ways Very Little Use
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Harley
Model: HT753
THIS THREADER IS A COPY OF LANDIS THREADER, HARLEY RECEDING THREADER and CUTTING-OFF MACHINE, Model HT-753, Type REVOLVING CHUCK, Mfg 1982, CAPACITY: Pipe Size thru 13…œ", LEAD ...more
70 Ton, Airam #ATP-9500, pneumatic punch press, 16" x105" bed, serial #3318-5-79-9500
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Pneumatic Presses
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Airam
Model: ATP-9500
70 Tons, Airam Pneumatic Punch Press, Model ATP-9500, Bed Size 16 X 105, Open Height 15, Serial Number 3318-5-79-9500 [P3626-6521], Model Number: ATP-9500-AP, Serial Number: 3318-5-79-9500 ...more
3' -9" Giddings & Lewis Bickford #Chipmaster, radial arm drill, 60-1200 RPM, #4MT, 54" under rail, spindle travel 9" tapping, power elevation, s/n #951-00386
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Radial Drills
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Giddings & Lewis
Model: CHIPMASTER
GIDDINGS AND LEWIS CHIPMASTER RADIAL ARM DRILL, Serial Number 951-00386 Model 2R, ARM LENGTH 3' (914.4mm), COLUMN DIAMETER 9" (228.6mm), SPINDLE TAPER 4MT, SPINDLE SPEEDS: 60, 93 ...more
Reciprocating Surface Grinders - Horizontal Spindle
4 Results
6" x 18" Sharp #SG618-2A, hydraulic surface grinder, 18" height, 2003
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Sharp
Model: SG618-2A
Year: 2003
1 – used SHARP RECIPROCATING TABLE SURFACE GRINDER, Model SG618-2A Serial Number 92B233 Mfg,d 2003, CHUCK: Permanent ...more
8" x 20" Okamoto #820N, surface grinder, 3-Axis power feed, incremental downfeed, electromagnetic chuck, stone dresser, digital read out
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Okamoto
Model: 820N
OKAMOTO SURFACE GRINDER Model 820N Type Reciprocating Table, Serial Number 2101, CHUCK: Walker Electro-Magnetic, 8" W x 20" L(203.2 x 508mm), CAPACITY:, TABLE: (1) T-Slot, Working ...more
14" x 36" Sunstrand, electric magnetic chuck, 4.527" thick ea, clt power grip, input 220-440V, 50-60Hz (2 available)
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Sunstrand
2-SUNDSTRAND ELECTRO MAGNETIC CHUCKS, Chuck Serial Number 500-101, Control Model Power Grip, Serial Number 402-115, NOTE BOTH SOLD AS WORKING PAIR, OVER-ALL SIZE Each:, Front to Back ...more
24" x 96" Mattison, 30" ht to chuck, incremental down feed, 30 HP, 20" x 6" grinding wheel
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Mattison
MATTISON SURFACE GRINDER, Type, Reciprocating Table, Serial Number 20648, CHUCK: Electro-Magnetic, Fine Line, Capacity: 24" x 96", Actual Size, 24" width x 101-3/16" length ...more
Right Angle T Engine Lathes
1 Result
52" Star right angle T-lathe, 12-1/2" centers, 40" face plate w/adj jaws, 3" spdl. thru hole, 6-350 RPM, 25HP, Serial #852-A
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Right Angle T Engine Lathes
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Star
STAR TOOL & DIE WORKS RIGHT ANGLE FACING T-LATHE, Serial Number 852-A, CAPACITY, Swing Over Bed 52" (1,320.8mm), Distance between Carriage to Face Plate 12½" (317.5mm), Face Plate ...more
Rotary Table Surface Grinders - Horizontal Spindle
1 Result
Arter #B30, 31" Mag chuck, tilt table, 33" extra hght, 35" factory riser, 40" swg, like new chuck
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Arter
Model: B30
30" diameter ARTER ROTARY SURFACE GRINDER Model B30, Horizontal Spindle, Extra Height under Full Diameter Grinding Stone 33 inch, Minimum 14" height under grinding stone, MAGNETIC CHUCK ...more
Onsrud #W1124A, Pin Router, 24" throat, 10000-20000 RPM, 25" x36" table, 7.5-5 HP, 460V.
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Routers
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Onsrud
Model: W1124A
Orton #E & F, inverted tilt, hand & power tilting
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Routers
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Orton
Model: E
ORTON TILTING SPINDLE ROUTER / SHAPER Model F, CAPACITY:, SPINDLE: Tilting: From 90 degrees Vertical, Unit adjustable 45 degrees under to 30 degrees outward. Horizontal & vertical ...more
11 Ton, NAS horizontal stretch wrap forming press, 136" part length, extrusion die heads 3" dia
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretch Forming Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Nas
NAS 11 ton STRETCH WRAP FORMING PRESS, FORMING TONNAGE 11, DISTANCE BETWEEN JAWS:, Maximum Length of Part with Tension Cylinders, fully retracted 136" (3,454.4 mm), Minimum Length of Part ...more
12 Ton, Hufford L & F CNC horizontal stretch wrap forming press #A5, 115" part length, Extrusion Die Heads 4" diameter
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretch Forming Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Hufford
Model: A5
L&F HUFFORD HORIZONTAL CNC Extrusion STRETCH WRAP FORMER (Stretch Forming Press), Model A-5, FORMING TONNAGE 12, DISTANCE BETWEEN JAWS 115" (2,921 mm), ARM SWING (each Arm has ...more
17.5 Ton, Hufford horizontal stretch wrap forming press #A10, 205" part length, 4" x5" extrusion head & 6" sheet head
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretch Forming Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Hufford
Model: A10
HUFFORD STRETCH WRAP FORMING PRESS, Model A-10, FORMING TONNAGE 17½, DISTANCE BETWEEN JAWS:, Maximum Length of Part with Tension Cylinders, fully retracted 205" (5207 mm), Minimum ...more
70 Ton, Versaform extrusion stretch wrap forming press #DB70T, distance between 8" Jaws 341" Part Length at 180 deg. rotation
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretch Forming Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Versaform
Model: DB70T
VERSAFORM EXTRUSION STRETCH WRAP FORMING MACHINE, Model DB70T, Serial Number 169-SF-002, FORMING TONNAGE 70, JAW AXIAL ROTATION +/- 180 Degrees, DISTANCE BETWEEN JAWS 334" (8,483.6 mm) ...more
Stretching and Shrinking Machines
7 Results
Marchant #4A, shrinking/stretching machine, 4" throat, pneumatic driven, with shrinking or stretching jaws, Large selection and color combination
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Marchant
Model: -4A
MARCHANT SHRINKER and STRETCHER MACHINE, Model 4A, PNEUMATIC POWER, CAPACITY:, Tensile Strength 70,000 lbs., Aluminum Alloy 24ST, ¼" thick x 1½" width, Aluminum Alloy 24SO ...more
Marchant #4H, shrinking & stretching machine, hydraulic powered, w/shrinking or stretching jaws
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, California, CA
Mfr: Marchant
Model: -4H
1 – used MARCHANT SHRINKER and STRETCHER MACHINE, Model 4H, HYDRAULIC POWERED, CAPACITY:, Aluminum Alloy ...more
Marchants #6A, 6" throat, pneumatic driven, w/shrinking or stretching jaws, serial #127, Large selection and color combination
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Marchant
Model: -6A
MARCHANT SHRINKER and STRETCHER MACHINE, Model 6A, PNEUMATIC POWERED, Serial Number 127, CAPACITY:, Tensile Strength 70,000 lbs., Aluminum Alloy 2024 1/4" thick x 1½" w (6.35mm thick ...more
Marchant #6FG, shrinking/stretching machine, 6" throat, kick type, w/shrinking jaws, serial #277
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Marchant
Model: -6FG
MARCHANT SHRINKER and STRETCHER MACHINE, Model 6FG, Kick Type Serial Number 277, CAPACITY 5/32" (3.968mm), Tensile Strength 24 ST 70,000 lbs., TYPE OF METAL:, Aluminum Alloy 2024 SO Thick ...more
Marchant #12A Shrinking and Stretching Machine, 12" throat, pneumatic driven, w/shrinking or stretching jaws, Large selection and color combination
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Marchant
Model: 12A
MARCHANT SHRINKER and STRETCHER MACHINE, Model 12A, PNEUMATIC POWERED DRIVEN, CAPACITY:, Tensile Strength 70,000 lbs., Aluminum Alloy 2024 5/32" thick x 1½" wide, Aluminum Alloy 5052 ...more
Marchant Shrinker - Stretchers 4A, 4H, 6FG, 6A, 12A, Jaw Assemblies & Jaws, new
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Marchant
MARCHANT SHRINKER ASSEMBLY T3A1 QUANITY, 1. HD1-A-1 Upper Jaw Block. 1, 2. HD1-A-2 Lower Jaw Block. 1, 3. HD1-A-3 Jaws, 2 Pairs (1 set). 2 PR, 4. HDI--A-4 Jaw Key. 4, 5. HDI-A-5 Spring. 4 ...more
TCE-Erco #1447, shrinker stretcher, kick type, 6" throat, with shrinker & stretching dies
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Stretching and Shrinking Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Tce-Erco
Model: 1447
TCE ERCO Kick Type SHRINKER and STRETCHER Model 1447, THROAT DEPTH 6 inch, 1-set of Extended over-hang Shrinking Jaws, Inventory Reference S5160-10209.
scorsby test stand kearfott power cw, 14x14" tilt table & tilt thru 15 Degrees & 20
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Test Stands
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Scorsby Test Stand Kearfott Power Cw
Tooling and Accessories - Miscellaneous
1 Result
Outboard tailstock, Giddings & Lewis #300-T, 4", vertical 36" Lucas, vert.39" #44B-484
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Giddings & Lewis
Model: OUTBOARD TAILSTOCK
GIDDINGS AND LEWIS OUTBOARD SUPPORT (Tailstock), HORIZONTAL BAR, Table Type Bar, For M-300T, Condition: Very Good, BAR DIAMETER. 4‘’, VERTICAL TRAVEL. 36’’, BASE ...more
15 Ton, Rotex #18CH, 18 station hydraulic powerred turret punching machine, 26" throat, 5 HP, 2002
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Turret Punches
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Rotex
Model: 18CH
Year: 2002
ROTEX HYDRAULC DRIVEN TURRET PUNCH, Model 18CH-2.25, Serial Number 45340, Date Mfg. 2002 Condition Excellent, CAPACITY:, Tons 15, Hole Punching Capacity, Maximum 2", THROAT DEPTH center of ...more
Vertical Band Saws
3 Results
20" x 13" DoAll #2013-20, Solid State vari-speed drive 1-5200 FPM, 2 speed box, 2 HP, 115 V., s/n 377-79182
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Vertical Band Saws
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Doall
Model: 2013-20
1 – used DOALL VERTICAL BAND SAW, Model 2013--20, Serial Number 377-79182, Electrical Schematic Number, CAPACITIES:, THROAT DEPTH. 20" (508mm), HEIGHT UNDER GUIDE. 13" ...more
36" DoAll #3612-3, variable speed blade thru 6000 fpm, hyd.feed table, blade welder & grinder
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Vertical Band Saws
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Doall
Model: 3612-3
36" throat DOALL VERTICAL BAND SAW Model 3612-3, Height under guide 13", Saw Blade Variable Speed: 25 thru 6,000 fpm., Motor Drive 3 hp., Heavy Duty Table with Power Feed and, Foot Control ...more
40.5" x 14.7" Pehaka #USF10R, vertical band saw, 24" x30.5" ilting table, vari-speed 40-6000 FPM, 3 HP, blade welder
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Vertical Band Saws
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Pehaka
Model: USF10R
1 – used PEHAKA VERTICAL BAND SAW, Model USF10R, Serial Number 27625, \, CAPACITIES:, THROAT ...more
8" Powermatic #61, woodworking jointer table 8.5" x65", 2 HP, 230 V., tilting & angle fence
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Woodworking Jointers
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Powermatic
Model: 61
POWERMATIC WOODWORKING JOINTER, Model 61 Serial Number 361269, CAPACITY: Width 8", TABLES:, Width x Length Over-all 8½" x 65…›", Each Table adjust on Inclined Ways ...more
Woodworking Pattern Mills
1 Result
No. 540 Ekstrom Carlson Pattern Makers Mill, spindle tilt-slides in/out, 18"x36" tilt table, 5HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Woodworking Pattern Mills
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Ekstrom Carlson
Model: 540
18" x 36" EKSTROM CARLSON High Speed VERTICAL MILLER, Model 540, "Not used since mill Rebuilt 2005", Speeds100 thru 5000 rpm. Spindle Collet Capacity 1" diameter., Spindle Quill Travel Down ...more
Woodworking Spindle Shapers
1 Result
Orton #E & F, spindle shapers, tilting, large selection, vari-spd & power feed, 5-10 HP
Century Machinery Co | Los Angeles, CA | Leon Dietch |
Category: Woodworking Spindle Shapers
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Orton
Model: E
used ORTON VERTICAL SHAPER (ROUTER), Model F, TILTING SPINDLE, Serial Number F-63-38473, Condition: REBUILT, CAPACITY:, SPINDLE:, Tilting: From 90 degrees Vertical, Unit adjustable 45 ...more
