Capital Machine Tools
Fairfield, CT 06825-2566
Gold Level Dealer
Surplus Record Dealer Since 2007
Contact
David Henchcliffe
About
Capital Machine Tools buys and sells working equipment & related machine shop tools.Products & Services
- CNC Machinery
- Fabricating Machinery
- Grinders
- Grinders, Cylindrical & Internal
- Grinders, Surface
- Lathes
- Milling Machinery
- Presses
Associations & Affiliations
10 listings in 7 categories
CNC Drilling and Tapping Centers
1 Result
Ugint #UT-360D, vertical drill & tapping center, vertical machining center, (2) pallet, 4th axis, 2020
Category: CNC Drilling and Tapping Centers
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Ugint
Model: UT-360D
Year: 2020
Ugint UT-360D Vertical Drill and Tapping Center, New 2020, (2) Pallet, 4th axis on each pallet, New 2020 Only 350 cutting hours (Subject to change) 12,000 RPM 30 taper Spindle Travels: 20.5"X - 14"Y - 13.8"Z 14 ATC Fanuc Series io-MD Control (2) Pallets (25.5" x 15.7" each pallet) 4th axis on both pallets 300 PSI High ...more
DMG, Mori #NLX-2500Y/700, CNC Lathe, Live Tooling, Y-Axis, 3" Spindle, 10" Chuck, S30 Collet Chuck, Low Hours, Tailstock, 2015
Category: CNC Lathes and Turning Centers
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Dmg
Model: NLX-2500Y/700
Year: 2015
DMG Mori NLX 2500/700 CNC Lathe New 2015 Only 4300 operating hours (subject to change because machine is still being used) Tailstock Chip Conveyor Chip Blaster High Pressure Coolant System Pre-setter Parts Catcher A2-8 Spindle Nose Can run 3" diameter part through spindle Includes Royal S30 collect chuck 10" 3 jaw ...more
48 Ton, Coastone #C15, CNC press brake, 5.2' overall, servo not hydraulics, very nice, 2021
Category: CNC Press Brakes
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Coastone
Model: C15
Year: 2021
Coastone CNC Press Brake, 48 ton x 63" bed length, New 2021, Fabulous running machine, See last photo for spec's, This machine does not use hydraulics. It uses servo's. Look them up online. Very quiet running machines, Located in a Connecticut shop, Feel free to inspect under power.
Gear Hobbing Machine For Bevel, Helical, Spur and Worm
1 Result
Gleason #645 Hypoid gear generator, 26" gear diameter capacity, extra gears
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Gleason
Model: 645
Year: 1980
GLEASON 645 Hypoid Gear Generator, Model: 645, Brand: GLEASON, Serial # 767403, Condition: Used, Year: 1980, Gleason Model 645 Hypoid Generator Gear Hobber, Outer Core: 14.22", 14.05", 14.88", Spiral Angle: 29.75", 30 Deg, 35 Deg., Cutter Diameter: 12", 16", 18", Extreme Ratio: 10:1, Root Angle Range: -8Deg. to ...more
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
8" x 24" Brown & Sharpe #824-Micromaster, 2-Axis hydraulic surface grinder, coolant
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Brown & Sharpe
Model: 824 MICROMASTER
8" x 24" Brown & Sharpe Micromaster 2 Axis Hydraulic Surface Grinder, Model 824 Micromaster, Electric chuck with neutrifier, Oil chiller, Coolant, In shop under power, Nice running machine.
12" x 24" Acer #Supra-1428AHD, 3-Axis Automatic Hydraulic Surface Grinder, O.S. Walker Perm. Mag Chuck, Super Clean, 2005
Seller: Capital Machine Tools
Location: Bridgeport, CT
Mfr: Acer
Model: SUPRA-1428AHD
Year: 2005
Acer Fully Automatic 3 Axis Hydraulic Surface Grinder Model: Supra 1428 AHD, New 2005 This grinder has not been used often 12" x 24" O.S. Walker Permanent Magnetic Chuck w/ chuck controls Will grind a 14" x 28" work piece Over wheel automatic wheel dressing attachment Coolant tank and pump with filtration system ...more
3/8" Waterbury-Farrel #20, Thread Roller, 3/8" Thread Diameter, (2 available)
Category: Thread Rollers
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Waterbury-Farrel
Model: 20
Waterbury Farrel Thread Roller Serial Number 40784-714, Flat die type 3/8" max diameter thread 5 HP Push button station Flywheel belt guard Located in Bridgeport, CT 06607.
Vertical Boring Mills & VTL's
3 Results
36" Bullard #Spiral-Drive, High Column, Turret and Side Heads, 3 Jaw Chuck, Fine Feeds, Tool Holders
Category: Vertical Boring Mills & VTL's
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Bullard
Model: SPIRAL-DRIVE
36" Bullard "High Column" Vertical Turret Lathe, Basic : (Subject to verification by inspection), Chuck: 34", Max. height under cross rail: 48", Max. swing: 38", Max. height under turret: 58", Chuck speeds: 9 - 150 rpm, Turret feeds: 0.002 - 0.500 IPR (Fine and Standard), Turret vertical travel: 26", Motor: 20 HP ...more
54" Bullard #Cutmaster, 4 Jaw Chuck, Turret, Ram, Side Heads, digital read out
Category: Vertical Boring Mills & VTL's
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Bullard
Model: CUTMASTER
54" Bullard Cutmaster Vertical Turret Lathe (VTL) 4 Jaw Chuck Turret Head Ram Head Side Head (was never used) DRO's on Turret and Ram Heads 160 max. RPM 40 HP Set to run on 230 volts, 3 phase (dual voltage motor) This machine is still very accurate and making parts for the aerospace industry Must be removed by the ...more
71" Froriep CNC vertical turret lathe, Fagor Control, 4 Jaw Chuck, Extra Vertical Height, 80" under Rail, 63" Under Tool
Category: Vertical Boring Mills & VTL's
Seller: Capital Machine Tools
Location: Fairfield, CT
Mfr: Froriep
71" Froriep CNC Vertical Turret Lathe, Fagor Control, 4 jaw chuck, 80" under rail (from top of chuck), Approx. 63" under tool, Chip Conveyor, Coolant tank and pump, Located in Kentucy shop under power.
