Automatics & Machinery Co Inc
Contact
About
Since 1989, customers have relied on A&MCO expertise and assistance when locating and acquiring the right machine to meet their requirements. We buy, sell, consign, auction and appraise machine tools and peripheral equipment.Products & Services
- Appraisers, Machinery & Equipment
- Automatic Screw Machines & Chuckers
- Automatic Screw Machines, Swiss Type
- CNC Machinery
- Lathes, CNC
- Machining Centers, CNC
Associations & Affiliations
185 listings in 57 categories
60 Hz Single Phase Transformers
2 Results
100 KVA 208/480 Primary, 380/480 Secondary, Piller Power Systems #AC100, transformer power convertor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: 60 Hz Single Phase Transformers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Piller Power
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
100 KVA 208/480 Primary, 380/480 Secondary, Piller Power Systems #AC100, transformer power convertor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: 60 Hz Single Phase Transformers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Piller Power
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Edge Technologies Edge #Patriot-551, magazine type bar feed, 8' bar length, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
Edge Technologies #Patriot-551, magazine bar feed, 2" cap., 12' bar length, 2012
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2012
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" bar capacity, 8' bar length, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" bar capacity, 8" bar length, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" bar capacity, 8" bar length, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" bar capacity, 8" bar length, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm to ...more
FMB #MiniMag-18, magazine type bar feed, 0.625" cap., 6' bar length, sliding headstock
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fmb
Model: MINIMAG-18
as per Brochure:, Technical :, Bar diameter capacity: 2mm to 18mm (.078" -.708"), Max. bar length: 2200mm (7' 3"), Min. bar length: 10000mm (39.4"), Magazine remnant length: 420mm ...more
FMB #Turbo-880, 12' magazine type bar feed, 3" bar diameter, 13' 8" bar length, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fmb
Model: TURBO-880
Year: 2007
as per Brochure:, Bar Diameter Capacity:, w/out prep:.315" - 3.071" (8mm - 78mm), with prep:.315 - 3.149" (8mm - 80mm), Max. bar length: 4200 mm (13' 8"), Min. bar length: 1000 mm ...more
Haas #Servo-300, bar feed, 3-1/8" bar capacity, 60" bar length, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: SERVO-300
Year: 2010
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Iemca #Master-865, versa magazine bar feed, 2.5" capacity, 14' bar length, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Iemca
Model: MASTER-865
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Iemca #Master-865, versa magazine bar feed, 2.5" capacity, 14' bar length, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Iemca
Model: MASTER-865
Year: 2010
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Iemca #Prodigy-547/21, bar loader, 1.75" capacity, 2002
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Iemca
Model: PRODIGY-547/21
Year: 2002
2002 IEMCA PRODIGY 547, Two channel sets, (28/40mm), Came off Okuma ESL6, Capacity. 1.75".
Iemca #VIP-80E-II, short magazine type barfeed, 3.125" cap., 4' bar, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Iemca
Model: VIP-80E-II
Year: 2007
as per brochure, bar size capacity: 6mm - 80mm (.236" - 3.125"), bar length capacity: =9.8" min. - 63" max., magazine maximum capacity: =29.5" max. (30 bars dia. 1.0"), operating voltage: ...more
LNS #Alpha-ST320, magazine bar feed, .118"-.78" bar capacity, 12' 3" bar length, 2008
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: ALPHA-ST320
Year: 2008
As Per Brochure, Bar Capacity:.118" -.78" (3MM - 20MM), Max. Bar Length Capacity: 12'3" (3,764 MM), Remnant Retraction System: Extract 3.5" to 15.75" long bar end, & deposits into ...more
LNS #Blaze-Air Parts unloader, 1/4"-3" dia., 2"-36" lengths, excellent, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: BLAZE-AIR
Year: 2014
from OEM Brochure (All should be confirmed by buyer), *Originally Installed on a Mori Seiki NL2000 MCSY*, *Spindle Liner ($495 ea), Vacuum Liner ($750 ea) and Sub Spindle Liner may need to ...more
LNS Channels for LNS Express 320 or 326 bar loaders
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: CHANNELS
Inventory of used LNS Express Channels and components, (3) 8mm channel set $750.00 ea, (1) 11mm channel set $750.00 ea, (1) 14mm channel set $750.00 ea, Misc pieces, (1) 23mm long channel + ...more
LNS #Hydrobar-Express-332, magazine type bar feed, 1.25" capacity, 12' bar length, 2004
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: HYDROBAR-EXPRESS-332
Year: 2004
are from OEM Brochure and items are described to, the best of our knowledge. ALL items show be confirmed by the buyer., Bar Diameter Capacity:.125" - 1.250" (Swiss machines or fixed ...more
LNS #HYS-3.12HS-4.8, super hydrobar bar feed, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: HYS-3.12HS-4.8
Year: 2014
Originally configured for a Citizen L12VII CNC Swiss Lathe, Can be configured for any CNC Swiss or turning lathe, as Per Brochure:, Consists of three (3) guide tubes with internal diameters ...more
LNS #HYS-3.20HS-3.3 Super Hydrobar, 3 tube gatling style bar feed, 6' bar capacity, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: HYS-3.20HS-3.3
Year: 2006
As Per Brochure, Consists of three (3) guide tubes with internal diameters of:,.866" for 1/2" to 13/16" diameter barstock (3/4"),.551" for 1/4" to 1/2" diameter barstock,.315" for 1/16" to ...more
LNS #HYS-6.32HS-4.8, 6 tube gatling type bar feed, 1.25" capacity, 12' bar, 1999
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: HYS-6.32HS-4.8
Year: 1999
To the best of our knowledge all listed below are deemed correct., It is the buyers responsibility to confirm ALL prior to purchase., Consisting of:, A three-piece aluminum profile barrel ...more
LNS #Quick-Load-Servo, magazine bar loader, 4.75" bar diameter, 63" bar length
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: QUICK-LOAD-SERVO
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
MTA #Tracer, magazine bar feed, 6' fixed or sliding headstock, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Bar Feeders and Loaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Mta
Model: TRACER
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
48" width x 24" D x 48" H TPS Blue M #DCSA-326-G-ST350, batch oven, 750 Degrees Fahrenheit
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Batch Type Furnaces
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tps Blue M
All information is from the OEM, we encourage the buyer to confirm ALL, Order #271254, Type: Class A, Amp Draw: 72 Amps, KW: 27.0, Air Flow: Horizontal, Cabinet Type: Floor Model, Temp ...more
Bed and Knee Milling Machines - Vertical
3 Results
Kearney & Trecker #320TF-16, 72" x16" tbl., 3 HP, 34" X, 12" Y, 18" Z, power draw bar, fwd/rev., coolant
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Kearney & Trecker
Model: 320TF-16
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Maxmill #UNK, vertical knee mill, 9" x42" table, 3 HP, R-8
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Maxmill
Model: UNK
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Vectrax #GS16V, vertical knee mill, 9" x49" table, 12" X, 32" Y, 16" Z, 4200 RPM, R8, Kurt vise
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Vectrax
Model: GS16V
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
29" wide x 7.6' long, Ameco #E200A/C, side hinge chip conveyor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Belt Conveyors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ameco
Weight, not including the pallet: 560#, Shipping Dimensions: 92" x 29" x 50", Replacement cost is over $7000.
Kalamazoo Industries #UNK, belt sanders, (2 available)
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Belt Sanders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Kalamazoo Industries
Model: UNK
KALAMAZOO UNK.
Booth and Cabinet Blast Cleaning and Shot Peening
1 Result
20" x 18" x 18" Trinco #20/CBD, sand blast cabinet, work stand, 20" x 15" front opening lid, 115 V., 1-phase
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Trinco
Model: 20/CBD
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Boring Mills, Horizontal, Table Type
1 Result
4" Lucas #441B-72, 42" vertical, 72" cross, 50 Taper, 36x74" table
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Boring Mills, Horizontal, Table Type
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lucas
Model: 441B-72
"To the best of our knowledge all listed below are deemed correct. It, is the buyer's responsibility to confirm all and we encourage an, inspection of the machine(s) and accessories ...more
Carbide, Friction and Cold Saws
1 Result
16" Brobo #SA400, semi-auto cold saw, 16" x .11" x 1.57" blade, 2017
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Carbide, Friction and Cold Saws
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Brobo
Model: SA400
Year: 2017
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
SMTW No. M10200, 8" capacity, 24" G-Wheel, 15.7 R-Wheel, in & thru feed
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Centerless Grinders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Smtw
Work Capacity: 8", Grinding Wheel Diameter: 24", Motor: 40HP, RPM: 1100RPM, Regulating Wheel:, Diameter: 15.7", Motor: 4HP, RPM: 200RPM, Linear Scales, Machine: 141" x 73" x 78", 22,046 ...more
Glebar #PG-9CRG, PLC, 2" dia capacity, 9" x 12-5/8" grinding wheel, plunge form, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Centerless Grinders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Glebar
Model: PG-9CRG
Year: 2010
"TO THE BEST OF OUR KNOWLEDGE ALL LISTED BELOW ARE DEEMED CORRECT., IT IS THE BUYER'S RESPONSIBILITY TO CONFIRM PRIOR TO PURCHASE.", Parker Hanifan PLC Touchscreen HMI Controls, Robotic ...more
Glebar #PG-9CRG, PLC, 2" dia capacity, 9" x 12-5/8" grinding wheel, plunge form, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Centerless Grinders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Glebar
Model: PG-9CRG
Year: 2011
"TO THE BEST OF OUR KNOWLEDGE ALL LISTED BELOW ARE DEEMED CORRECT., IT IS THE BUYER'S RESPONSIBILITY TO CONFIRM PRIOR TO PURCHASE.", Parker Hanifan PLC Touchscreen HMI Controls, Work ...more
Glebar #PG-9CRG, PLC, 2" dia capacity, 9" x 12-5/8" grinding wheel, plunge form, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Centerless Grinders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Glebar
Model: PG-9CRG
Year: 2010
"TO THE BEST OF OUR KNOWLEDGE ALL LISTED BELOW ARE DEEMED CORRECT., IT IS THE BUYER'S RESPONSIBILITY TO CONFIRM PRIOR TO PURCHASE.", Parker Hanifan PLC Touchscreen HMI Controls, Work ...more
CNC Drilling and Tapping Centers
3 Results
Fanuc Robodrill #Alpha-T14iA, 14 ATC, 19.6" X, 14.96" Y, 11.81" Z, 8k RPM, BT30,1998 (2 available)
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Drilling and Tapping Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fanuc
Model: ALPHA-T14IA
Year: 1998
"To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirm prior to purchase.", Table size 25.59" x 14.96", Maximum table load 440 ...more
Fanuc Robodrill #Alpha-T21iCL, drill & tap, 14 ATC, 19.6" X, 14.9" Y, 11.8" Z, 8k RPM, ISO 30, 2002
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Drilling and Tapping Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fanuc
Model: ALPHA-T21ICL
Year: 2002
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Fanuc Robodrill #Alpha-T21iDL, 21 ATC, 19.68" X, 15.75" Y, 12.99" Z, 20k RPM, BT30, 7.5 HP, 25.59" x 15.74" table, Fanuc 16i-MB, 2003
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Drilling and Tapping Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fanuc
Model: ALPHA-T21IDL
Year: 2003
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
CNC Horizontal Spindle Surface Grinders
2 Results
18" x 48" Mattison, CNC horizontal spindle surf grinder, 20" diameter x 4" wide wheel, 15 HP
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Mattison
MATTISON CNC Horizontal Spindle Reciprocating Surface Grinder, Convert to Metric, Table-W 18", Table-L 48", Power 15 hp, Grinding Wheel Width 4", Grinding Wheel Dia. 20", MAX. GRINDING ...more
19" x 49" Okamoto #PSG-125, CNC surface grinder, 57.08" X, 24.4" Y, 22.04" Z, 20" x48" electromagnetic chuck, 20.07" x1.96" x5" wheel, Fanuc O-M, 1990
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Okamoto
Model: PSG-125
Year: 1990
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech #B465T3/Y3, CNC turning center, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, magazine barfeed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: B465T3/Y3
Year: 2020
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech #B465T3/Y3, CNC turning center, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, Edge magazine barfeed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: B465T3/Y3
Year: 2020
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech #B465T3/Y3, CNC turning center, 20" swing, 10" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, Edge magazine barfeed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: B465T3/Y3
Year: 2020
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech #B465T3/Y3, CNC turning center, 20" swing, 10" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, Edge magazine barfeed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: B465T3/Y3
Year: 2020
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech #B465Y2, CNC turning center, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, magazine barfeed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: B465Y2
Year: 2020
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Eurotech Elite #Quattroflex-420SLLY, CNC turning center, 6" chuck, 1.7" bar, 7-Axis, Fanuc 18iTT, 2002
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Eurotech
Model: QUATTROFLEX-420SLLY
Year: 2002
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection, of the machine(s) and accessories ...more
Ganesh #Cyclone-32GTS, CNC dual spindle gang tool lathe, Super 900T, 12' Edge Patriot 338" magazine barfeed, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ganesh
Model: CYCLONE-32GTS
Year: 2014
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an, inspection of the machine(s) and accessories ...more
Ganesh #Cyclone-CS-32T, gang / turret turning center, 4" swing, 1.2" bar, 4.72" diameter, 6.5" length, A2-4, 8 turret, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ganesh
Model: CYCLONE-CS-32T
Year: 2007
This is a Sliding Headstock Chucker Machine (like a CNC Swiss Chucker), Barfeed Capacity 1.25” (36mm), Spindle Speed 4000 RPM (must verify), Spindle Servo Motor 5-HP Continuous ( ...more
Haas #SL-10T, CNC turning center, 16.2" swing, 6" chuck, 1.7" bar, 16.5" centers, A2-5, tlst, foot pedal, 2004
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: SL-10T
Year: 2004
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Miyano #BNE-51S, CNC turning center, 6" chuck, Fanuc 18-T, LNS Turbo HB chip conveyor, LNS QL servo, refurbished
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Miyano
Model: BNE-51S
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Miyano #BNE-51S, CNC turning center, 8" chuck, Fanuc 18-T, LNS Quickload servo bar loader
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Miyano
Model: BNE-51S
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Miyano #GN3200W, precision, 1" chuck, 1.3" bar capacity, 1.96" turn diameter, 8k RPM, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Miyano
Model: GN3200W
Year: 2020
from Manufacturer's Brochure - - all must be confirmed by the buyer, Control: FS 0i-TD 2 system, Controlled axis X, Z 2 axes 2 systems, 2 Saddle loader: 2 axes 2 systems, 1 Saddle ...more
Nakamura Tome #WTW150, CNC turning center, 6" chuck, 2.5" bar, 12.2" diameter, 10.04" length, Fanuc 21iTB, chip conveyor, 2003
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Nakamura
Model: WTW-150
Year: 2003
As Per Brochure (Please Verify ):, Turning Diameter: 12.20", Turning Length: 10.04, Bar Capacity: 2.55"/2", Chuck Size: 6", Axis Travel:, Upper Turret (slide travel x/z/b2): ...more
Smart #SL200, CNC turning center, 22.8" swing, 8" chuck, 2.5" bar, 13.78" diameter, 23.6" length, A-2, 10 turet, 2019
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Smart
Model: SL200
Year: 2019
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Takamaz #XC-100, CNC turning center, 6" chuck, 1" bar, 7" diameter, 7.48" length, A2-5, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Takamaz
Model: XC-100
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Yama Seiki #GLS-3000M, CNC turning center, 29.9" swing, 10" chuck, 3" bar, 17.32" diameter, 27.95" length, A2-8, 12 turret, 2018
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Lathes and Turning Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Yama Seiki
Model: GLS-3000M
Year: 2018
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
CNC Rotary Tables and Indexers
3 Results
Haas #HRT-210-2, 4-Axis, rotary table, 8.3" platter diameter
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Rotary Tables and Indexers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: HRT-210-2
Year: 2007
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Haas #HRT-210-2, 4-Axis, rotary table, 8.3" platter diameter
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Rotary Tables and Indexers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: HRT-210-2
Year: 2007
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Haas #HRT-210SPH, 4-Axis, rotary table, 8.3" platter diameter
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Rotary Tables and Indexers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: HRT-210SPH
Year: 2010
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
CNC Turret Punch Press Machine
1 Result
55 Ton, Nisshinbo #HIW-1250, turret punch press, 37 station, 4' x 8' table size, 98.4" X-axis travel, 49.2" Y-axis travel, 52 tools, 3.5" hole, 2001
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Turret Punch Press Machine
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Nisshinbo
Model: HIW-1250
Year: 2001
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
CNC Vertical Bed Mills
3 Results
Acer #4VK, CNC vertical miller, 10" x50" table, Milltronics Centurion 1, TSMU RT-160 4-Axis rotary table, SMW Accu-smart 60 index controller, 1995
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Vertical Bed Mills
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Acer
Model: 4VK
Year: 1995
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Milltronics #MB-19M-B, CNC knee mill, 13" x50" table, 7.5 HP, 35" X, 19" Y, 22.5" Z, 4k RPM, #40
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Vertical Bed Mills
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Milltronics
Model: MB-19M-B
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Sharp #HMV, CNC knee mill, 10" x51" tbl., 30" X, 30" Y, 17" Z, 2-Axis, Proto-Trak PLus digital read out Control
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: CNC Vertical Bed Mills
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Sharp
Model: HMV
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
TEC Lighting #TRUV30 #HSC-30, high speed UV coating machine, 30" x 26" sheet
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coating Machines
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tec Lighting
Model: TRUV30
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Coolant Filtering Systems
1 Result
Ransohoff #Waste-Wizard-120, aqueous recycling system, immersion heater
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coolant Filtering Systems
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ransohoff
Model: WASTE-WIZARD-120
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Coordinate Measuring Machines (CMM)
8 Results
DMG Mori-Seiki #Uni-20/40, tool presetter, MicroVision IIIPLC, 2016
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Dmg
Model: UNI-20/40
Year: 2016
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Keyence #XM-1200, handheld probe coordinate measuring machine, 23.62" X, 11.81" Y, 7.87" Z, XM-1500 controller, 2017
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Keyence
Model: XM-1200
Year: 2017
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Keyence #XM-1600, handheld probe coordinate measuring machine, RS-232
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Keyence
Model: XM-1600
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Keyence #XM-C1000, handheld probe coordinate measuring machine, 23.62" X, 11.81" Y, 7.87" Z, XM-T1200 controller, 2017
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Keyence
Model: XM-C1000
Year: 2017
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Mcbain Instruments #FOI-1, fiber optic illuminator, Meiki EMZ microscope w/ SWF10X lens
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Mcbain Instruments
Model: FOI-1
Mcbain Instruments FOI-1, Meiki EMZ Microscope with SWF10X Lens.
Oasis #Core, optical profile inspection system, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Oasis
Model: CORE
Year: 2011
per brochure, s:, Instant Measurements, Accurate to +/- 0.0001 Inches, Simplifies Complex Measurements, User-Friendly Full Software, Data Exportable to SPC Software, Quick Return on ...more
Oasis #Core, optical profile inspection system, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Oasis
Model: CORE
Year: 2011
per brochure, s:, Instant Measurements, Accurate to +/- 0.0001 Inches, Simplifies Complex Measurements, User-Friendly Full Software, Data Exportable to SPC Software, Quick Return on ...more
Oasis #Core, optical profile inspection system, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Coordinate Measuring Machines (CMM)
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Oasis
Model: CORE
Year: 2011
per brochure, s:, Instant Measurements, Accurate to +/- 0.0001 Inches, Simplifies Complex Measurements, User-Friendly Full Software, Data Exportable to SPC Software, Quick Return on ...more
Leco #CM-15, metal cut-off saw, 1.5" bar diameter, 230 V., 1-phase, enclosure
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Cutoff Saws
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Leco
Model: CM-15
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Simec #SB3000, 4" capacity, 10' max.bar length, 1997
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Deburring Machines
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Simec
Model: SB3000
Year: 1997
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Dust Collectors
2 Results
1000 cfm Donaldson #EA-905, centrifugal mist collector, 5.9" intake
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Dust Collectors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Donaldson
Model: EA-905
All and are subject to change without notification., Information is from the OEM Data Sheet and all should be check/confirmed prior to purchae., Model EA-905, This unit can process just ...more
2600 cfm Camfill Handite Oil Expert #4.5 oil mist collector, 2015
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Dust Collectors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Camfill
Model: 4.5
Year: 2015
All must be confirmed by the buyer:, (1) Two-Stage Oil Filtration System, (1) Empty Housing for Final Filter, (1) P-Trap and Siphon, (1) APC Custom Fan 2600 CFM @ 12.2" WG @ 4800 ft elev. ...more
13" x 21.5" Southbend #CL187ZB, engine lathe, 1 HP, 230/460 V., 3-phase
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Engine Lathes
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Southbend
Model: CL187ZB
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
26.7" x 44" Lagun American #Turnmaster-HR-680X 1100G, engine lathe, 4.5" bore, D1-8 mount, Newall 2-Axis digital read out, tailstock, follow & steady, 1999
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Engine Lathes
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lagun
Model: TURNMASTER-HR-680X
Year: 1999
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
DanLaf ClanLaf #HF-914, laboratory equipment, laminar air flow cabinet, 2002
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Filtration Systems
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Danlaf
Model: HF-914
Year: 2002
Parent Manufacturer: Claus Damm A/S, Vertical Laminar Airflow Workstation, Unit Serial Number: 022165, Inside cabinet dims: 37.5"w x 85"h x 36"d, Outside cabinet dims: 50"w x 103.5"h x ...more
Finishing Machines
2 Results
Finishing Associates #B200, 10.5" x24" x12.4" centrifugal barrel finishing system, 6 cu.ft., 135 RPM, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Finishing Machines
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Finishing Associ
Model: B200
Year: 2014
Approximate (specific dimensions should be confirmed prior to purchase), Capacity: 6.0 cu.ft (30"L x 9" wall ht.), Barrel lined with rubber, 2 Hp, machine 1.3 x 1.3m x 1.6m(H), Inside ...more
Sintobrator Ltd. #VF-P, Vibrating Barrel Finishing Machine
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Finishing Machines
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Sintobrator
Model: VF-P
Year: 1997
1997 Sintobrator VF-P.
VirTis #Genesis-25EL, pilot lyophilizer (Freeze Dryer), 208-230 V., 1-phase, 1996
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Freeze Dryers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Virtis
Model: GENESIS-25EL
Year: 1996
VirTis #Genesis-25EL, pilot lyophilizer (freeze dryer), 1996
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Freeze Dryers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Virtis
Model: GENESIS-25EL
Year: 1996
From OEM Brouchure, The Genesis Pilot Lyophilizer is constructed with versatility in mind so that this, freeze dryer can meet any lyophilization requirement. Shelf temperatures as low as ...more
Rem #RemCool-2400, high pressure coolant system, 350 psi, 4.33 GPM, 2 HP, 2001
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: High Pressure Coolant Systems
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Rem
Model: REMCOOL-2400
Year: 2001
per Brochure:, Power: 2 HP, Flow: 4.33 gpm pump, Pressure: 100 - 350 PSI, (To be Confirmed by Buyer):, 75 micron bag type filter & electricals, Usage: This pump is the standard coolant ...more
Wright #UNK, self dumping hopper
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Hoppers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Wright
WRIGHT UNK.
Horizontal CNC Machining Centers
2 Results
Excel #HMC-400T32, horizontal machining center, 32 automatic tool changer, 24" X, 17.7" Y, 20" Z, 12000 RPM, #40, 20 HP, 4-Axis, Fanuc 21MB, chip conveyor, 1998
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Horizontal CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Excel
Model: HMC-400T32
Year: 1998
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Mori Seiki #SH-630, horizontal machining center, 33.1" X, 29.9" Y, 33.1" Z, 10000 RPM, #50, MSC-502, chip conveyor, 1998
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Horizontal CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Mori Seiki
Model: SH-630
Year: 1998
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
300 Ton, HTC #300-12H, hydraulic press brake, 12' overall, 120" between housing, 7" stroke, 14.5" open
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Hydraulic Press Brakes
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Htc
Model: 300-12H
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Fanuc, ArcMate 120i, welding robotic cell, Lincoln Powerwave 455M, Rj3-iB controller
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Industrial Robots
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fanuc
Model: ARCMATE 120I
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Romer #Absolute-Arm-7545, portable measuring arm, 6-Axis, 2012
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Inspection Equipment
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Romer
Model: ABSOLUTE-ARM-7545
Year: 2012
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
14" Deltronic #DH-214, optical comparator, MPC4 2-Axis digital read out, 20X lens
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Optical Comparators
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Deltronic
Model: DH-214
All should be verified by the buyer:, Screen Diameter: 14", Size of Measuring Table: 2" x 14", Longitudinal Table Travel: 8", Vertical Table Travel: 6", Cross Travel for Focusing: 3" ...more
14" Starrett #Sigma-HB350, 5" x15.35" table, 8" horiz travel, 4" vert travel, 1.5" focus
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Optical Comparators
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Starrett
Model: SIGMA-HB350
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
14" Starrett #Sigma-HB350, 5" x15.35" table, 8" horiz travel, 4" vert travel, 1.5" focus
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Optical Comparators
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Starrett
Model: SIGMA-HB350
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Plant Shop and Chip Conveyors
1 Result
UNK #XD20H, Ienteco chip conveyor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Plant Shop and Chip Conveyors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Unk
Model: XD20H
Inteco XD20H, Bar feed channels on conveyor not included., Low profile conveyor, Dimensions. 123" x 48" x 60", Weight. 1,000 lbs.
Powder Mixers and Blenders
1 Result
Union Process #Q2, recirculation attritor, 5 HP, 2012
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Powder Mixers and Blenders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Union Process
Model: Q2
Year: 2012
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Presetting Tools
4 Results
Citizen #ATP-101, tool presetter, Citizen M20/32 jig block, TP-1000 presetter fit
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Presetting Tools
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: ATP-101
To the best of our knowledge all listed below are deemed correct. It, is the buyer's responsibility to confirm all and we encourage an, inspection of the machine(s) and accessories ...more
Citizen Cincom #TP-1000, presetter, inch with block for G16/F10 tooling
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Presetting Tools
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: TP-1000
Year: 1985
The TP-1000 Universal Tool Presetters have the same base., The block & /jig are different for each model of machine., Ask about used & new Blocks & Jigs for ID, OD, Rotary and ...more
Citizen Cincom #TP-1000, presetter, inch, with ATP101 block & jig for F20/F25
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Presetting Tools
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: TP-1000
Year: 1984
The TP-1000 Universal Tool Presetters have the same base., The block & /jig are different for each model of machine., Ask about used & new Blocks & Jigs for ID, OD, Rotary and ...more
Star #43422, tool presetter
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Presetting Tools
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: 43422
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
6" x 18" Chevalier #FSG-618M, horizontal surface grinder, electromagnetic chuck, 2 HP, .5" x 8" wheel
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Chevalier
Model: FSG-618M
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
14.5" x 27.5" Chevalier #FSG-3A1224, precision grinder, 14" dia. x 1-2" wheel, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Chevalier
Model: FSG-3A1224
Year: 2005
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Single Cranked Back Gear OBI Press Machines
2 Results
60 Ton, Bliss #C-60, 4" stroke, 21" x 32" bed, 60 SPM, air clutch, air brake, cushion
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Bliss
Model: C-60
Year: 1973
as per brochure:, Capacity: 60 ton, Stroke: 1", Ram adjustment: 3", Stroke per minute: 60, Bed: 21" x 32", Shut Height 15.75".
60 Ton, Minster #6, OBI press, 4" stroke, 15.5" Shut Height, 3" adj., 21" x32" bed, air clutch, S/N 6-9030, Littell C-20 combination cradle reel & straightener & feeder, 1963
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Minster
Model: -6
Year: 1963
all must be verified by buyer., Capacity 60 Ton, Length of stroke 4”, Strokes per minute (fixed) 90, Slide adjustment 3”, Shut height over bolster. (SDAU) 15-1/2”, Bed ...more
15.7"/23" x 50" Harrison #Alpha-400, 2.1" bore, D1-6, #4MT, rapid traverse, 1996
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Sliding Gap Bed Lathe
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Harrison
Model: ALPHA-400
Year: 1996
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
15.7"/23" x 50" Harrison #Alpha-400S, CNC flatbed lathe, 10" chk, 3-jaw, 2.1" bore, D1-6, Fanuc 21iTA, 2000
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Sliding Gap Bed Lathe
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Harrison
Model: ALPHA-400S
Year: 2000
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
17"/24" x 43.5" Kingston #HJ-1100, engine lathe, 10" chk, 3-jaw, 2-1/4" bore, D1-6, 1995
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Sliding Gap Bed Lathe
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Kingston
Model: HJ-1100
Year: 1995
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
17"/24" x 60" Kingston #HJ-1700, engine lathe, 10" chk, 3-jaw, 2-1/4" bore, steady & follow, 1989
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Sliding Gap Bed Lathe
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Kingston
Model: HJ-1700
Year: 1989
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
JF Berns, spindle liners, 3" spindle bore, approx 14 liners
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Spindle Tooling
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Jf Berns
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Steel Slat and Chip Conveyors
1 Result
27" x 112" LNS Turbo #5475-8328, chip conveyor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Steel Slat and Chip Conveyors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lns
Model: 5475-8328
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Straight Side Double Crank (Single Action) Press Machines
1 Result
20 Ton, Minster #PM2-20-2, straight side double crank, 1.2" stroke, 9.7" Shut Height, 1" adj., 24" x 20" bed, 10" windows, air clutch & brake, 1974
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Minster
Model: PM2-20-2
Year: 1974
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Swiss Type and Lathe CNC Automatic Screw Machines
36 Results
Citizen #E-32, CNC swiss lathe, 6-Axis, Mitsubishi Meldas-330 HLC, Iemca Boss 542,1994
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: E-32
Year: 1994
FOR CITIZEN E-32 - FROM BROCHURE, Control: Mitsubishi Meldas-330 HLC, No. of Controlled Axes: 6 (X1, Z1, X2, Z2, Z3, C1), Simultaneous Six Axis Control(Three Systems), Maximum Machining ...more
Citizen #FL-42, CNC swiss lathe, 6" chuck, 1.63" bar, Mitsubishi 635LCC, Iemca VIP 80 barfeed, 2002
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: FL-42
Year: 2002
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Citizen #K16EVIIP, CNC swiss lathe, Cincom System 7M, 12' FMB Minimag 20 magazine barfeed, LNS chip conveyor, 2015
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: K16EVIIP
Year: 2015
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Citizen #K16VII, CNC swiss lathe, Fanuc 31i, 12' CAV16K-IS bar loader, 2008
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: K16VII
Year: 2008
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Citizen #L32, CNC swiss lathe, 1.25" capacity, Cincom IV, Iemca magazine barfeed, LNS Turbo chip conveyor, 1996
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: L32
Year: 1996
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Citizen #M32III, CNC swiss lathe, 1.25" capacity, 12' CAV32 IS bar loader, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Citizen
Model: M32III
Year: 2006
All must be confirmed by the buyer, per the Manufacturers Brochure, Max. machining diameter (D) 32mm dia, Max. machining length (L) 320mm/1 chucking, Spindle through-hole diameter 36mm ...more
Ganeh #Cyclone-32CS, CNC swiss lathe, 1.25" bar, 6000 RPM, 10 HP, 12' Iemca magazine bar loader, chip conveyor, 2012
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ganesh
Model: CYCLONE-32CS
Year: 2012
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an, inspection of the machine(s) and accessories ...more
Ganesh #Cyclone-32CS, CNC swiss lathe, 1.25" bar diameter, Iemca Patriot 338 magazine barfeed, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ganesh
Model: CYCLONE-32CS
Year: 2014
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Hanwha #XD32H, CNC swiss lathe, 1.25" capacity, 5-Axis, Fanuc I, Edge Patriot 338 magazine bar loader, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Hanwha
Model: XD32H
Year: 2011
Machining Capacity:, Max Bar Capacity Round: 1.25, Max Bar Capacity Hex: 1.062, Max Bar Capacity for the Sub Spindle: 1.25, Tapping Capacity on the Main Spindle: 0.312, Front Ejection from ...more
Nexturn #SA-38E, CNC swiss lathe, Fanuc 18iTB, 12' FMB Turbo 3-38 magazine bar loader, LNS chip conveyor, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Nexturn
Model: SA-38E
Year: 2007
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Nomura #NN-38UB8, CNC swiss lathe, 1.5" diameter, 10" length, Mitsubishi M80, FMB Turbo 5-55 magazine barfeed, Tri-Mist 850 G2 mist collector, LNS chip conveyor, 2021
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Nomura
Model: NN-38UB8
Year: 2021
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
PoLyGim #Diamond-32CSBII, CNC swiss lathe, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Polygim
Model: DIAMOND-32CSBII
Year: 2014
from Manufacturer's Brochure:, Working Range:, Max. Machining Dia. 32 mm, Max. Machining Length Per Chucking 250 mm, Max. Drilling Dia. 15 mm, Max. Tapping Dia. M12, O.D. Tooling: ...more
PoLyGim #Diamond-32CSL, convertable CNC swiss lathe, 1.2" capacity, Fedek SN-542 bar loader, Mitsubishi M60, 2009
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Polygim
Model: DIAMOND-32CSL
Year: 2009
2009 PoLyGim (Eurotech) (Cubic) Diamond 32CSL, Mitsubishi M60 CNC Control, 2006 Fedek SN-542 Bar Loader - s/n 15248805, Fully Programmable B-axis with 3-Live tools, Cool Blaster High ...more
Schutte #AF-26, automatic screw machine, 1" capacity, 8 spindle, Siemens Sinumerick System 3 PLC Control, 1985
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Schutte
Model: AF-26
Year: 1985
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Star #SA-12, CNC swiss lathe, .5" capacity, 4-Axis, Fanuc 18iTA, 1998
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SA-12
Year: 1998
per Brochure:, CNC Control: Fanuc 18iTA, Controllable Axes: X, Y, Z, Z2, Combinations of 6-OD tools, 2-power driven tools for cross drill/mill, front, & rear facing 4-spindle attachment ...more
Star #SA-12, CNC swiss lathe, .5" capacity, Fanuc 18iTA, 1997
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SA-12
Year: 1997
per Brochure:, CNC Control: Fanuc 18iTA, Controllable Axes: X, Y, Z, Z2, Combinations of 6-OD tools, 2-power driven tools for cross drill/mill, front, & rear facing 4-spindle attachment ...more
Star #SB-16-C, CNC swiss lathe, Fanuc 18ITB, 12' Star ASO loader, 2005
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SB-16-C
Year: 2005
FOR A STAR SB-16, CONTROL: FANUC 18ITB, MAX. MACHINING DIAMETER: 5/8", MAX. HEADSTOCK STROKE:, STD: 8", REVOLVING GUIDE BUSHING: 6.7", TOOLING: 3 LIVE/5OD OR 2 LIVE/6OD, 4ID / 2 ...more
Star #SB-16-D, CNC swiss lathe, Fanuc 18iTB, 12' Star ASO loader, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SB-16-D
Year: 2007
for a Star SB-16D per brochure:, Control: Fanuc 18iTB, Axes: X1, Y1, Z1, C1, X2, Z2, Max. Machining Diameter: 5/8", Max. Headstock Stroke:, Std: 8", Revolving Guide Bushing: 6 3/32" ...more
Star #SR-20JC, CNC swiss lathe, .78" capacity, 7-Axis, Fanuc 18i-TB, Iemca Smart 320 magazine barfeed, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SR-20JC
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Star #SR-20R, CNC swiss lathe, .75" capacity, LNS magazine bar feed, 2003
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SR-20R
Year: 2003
As Per Brochure (Buyers are responsible for confirming, all below):, CNC control: Fanuc, Axes: X1, Y1, Z1, C1, X2, Z2, C2, Max. turning diameter: 3/4" (25/32"), Max. headstock strike: 8" ...more
Star #SR-20R, CNC swiss lathe, .75" capacity, Fanuc 18IT, Iemca Genius 120 magazine barfeed, 2005
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SR-20R
Year: 2005
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Star #SR-20RII, CNC swiss lathe, .75" capacity, 6-Axis, Fanuc 18i-TB, LNS magazine bar feed, 2004
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SR-20RII
Year: 2004
as per Brochure:, Control: Fanuc 18i-TB, Number of Axes: 6 (7), X1, Y1, Z1, C1, X2, Z2, C2 (opt), Max. Diameter: 3/4", Max. Headstock Stroke: 8.07" standard, 6.68" w/ gripping unit, Max. ...more
Star #SR-20RII CNC swiss lathe, .75" capacity, Fanuc 18i-TB, LNS magazine bar feed, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SR-20RII
Year: 2006
as per Brochure:, Control: Fanuc 18i-TB, Number of Axes: 6 (7), X1, Y1, Z1, C1, X2, Z2, C2(opt), Max. Diameter: 3/4", Max. Headstock Stroke: 8.07" standard, 6.68" w/ gripping unit, Max. ...more
Star #SV-20, CNC swiss lathe, Fanuc 16T, FMB magazine bar feed, chip conveyor
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SV-20
All must be confirmed by the buyer., per OEM brochure for Star SV-20, CNC Control: Fanuc 16T, Max Turning Diameter: 20mm (25/32"), Headstock Stroke: 8", Main Spindle:, Headstock Spindle ...more
Star #SW-12RII, CNC swiss lathe, Fanuc 31i, FMB Micromag 20 magazine barfeed, Turbo chip conveyor, 2019
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Star
Model: SW-12RII
Year: 2019
2019 Star SW12RII, Fanuc 31i CNC Control, FMB Micromag 20 Magazine Barfeed, Turbo Chip Conveyor, High Pressure Coolant System, Tri Mist Collector 850, Capacity. 0.5", Power. 4.9 kW, RPM. ...more
Tornos #BS20, 8 spindle, automatic screw machine, 20" hole diameter, .75" capacity
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tornos
Model: BS20
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tornos #R125, automatic swiss screw machines, Bechler Cam shaper, 3 spindle attach., (12 available)
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tornos
Model: R125
Type Machine Name Model# Serial# Age, Swiss Bechler CPM Cutting Machine CF, Swiss Tornos Swiss Screw Machine, 10mm Capacity, Barfeed, Drilling Attachment R10 26954 1962, Swiss Tornos Swiss ...more
Tsugami #B0124, CNC convertible swiss lathe, 4-Axis, Fanuc 0i-TD, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: B0124
Year: 2014
To the best of our knowledge all listed below are deemed correct. It, is the buyer's responsibility to confirm all and we encourage an, inspection of the machine(s) and accessories ...more
Tsugami #B0206-II, CNC swiss lathe, .75" capacity, Fanuc 32iTB, Edge Minuteman 320SE magazine barfeed, 2013
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: B0206-II
Year: 2013
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tsugami #BH38SY, gang slide/turret CNC swiss lathe, Fanuc 31i-A, 12 turret, LNS turbo chip conveyor, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: BH38SY
Year: 2010
FOR A TSUGAMI BH38SY, ( to be confirmed by the buyer), Control: Fanuc 31i-A, Axes: Front end:, Main Spindle: Z1, C1, Sub Spindle: X2, Z2, C2, Gang plate: X1,Y1, Turret: X3,Y3,Z3 ...more
Tsugami #BO125III, CNC swiss lathe, 5-Axis, Fanuc 0i-TD, FMB Turbo 2-20 magazine bar feed, 2015
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: BO125III
Year: 2015
As Per Brochure (Please Verify ):, Control: Fanuc 0i-TD, No of Axes: 5 (X1, x2, Y1, Z1, Z2), Machinable Diameter: 3-12 mm, Max. Machining Length 210 mm, 80/170 mm w/ Rotary Guide Bushing ...more
Tsugami #BU-26SY, CNC swiss gang slide / turret lathe, 1" bar, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: BU-26SY
Year: 2006
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tsugami #BU-26SY, CNC swiss gang slide/turret lathe, 1" capacity, Fanuc 18iTB2, LNS Hydrobar Express 332 bar feed, 2005
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: BU-26SY
Year: 2005
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tsugami #BU-38SY, gang slide/turret CNC Swiss lathe, Fanuc 18iTA, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: BU-38SY
Year: 2006
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tsugami #S206-II, CNC swiss lathe, .75" capacity, LNS GT-326E magazine bar feed, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: S206-II
Year: 2020
2020 Tsugami S205II, LNS GT-326E Magazine Bar Feed, with 10mm, 17mm and 23mm channels, MP Systems High pressure Coolant (oil only), Tri-Mist 850 G2 Mist Collector, Guide Bushing and Chucker ...more
Tsugami #TMU-1, CNC swiss lathe, 60 ATC, 9-Axis, Fanuc 18iTB, LNS HYS bar feed, chip conveyor, 2008
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tsugami
Model: TMU-1
Year: 2008
All must be conformed by the buyer, per Manufacturer's Brochure, (all must be confirmed), Control: Fanuc 18iTB, Axes: 9-Axis, (X1,X2,Y,A1,A2,Z1,Z2,C1,C2), Max. stock dia.: 38mm (1 ...more
Table Blast Cleaning and Shot Peening
1 Result
12" Gibson #12x44, shot blaster, dust collection system, 2012
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Table Blast Cleaning and Shot Peening
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Gibson
Model: 12X44
Year: 2012
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tank Mounted Air Compressors
1 Result
10 HP Speedaire #5Z689A-2, tank mounted air compressor, 72 cfm, 100 psig
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Tank Mounted Air Compressors
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Speedaire
Model: 5Z689A-2
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Lincoln #Electric-Square-Wave-Tig-255, portable welder, cooler
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Tig Welders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lincoln
Model: ELECTRIC-SQUARE-WAVE-TIG-2
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Lincoln Electric #Precision-Tig-275, portable welder
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Tig Welders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Lincoln
Model: PRECISION-TIG-275
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Miller #Syncrowave-351, AC/DC portable tig welder
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Tig Welders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Miller
Model: SYNCROWAVE-351
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Tooling and Accessories - Miscellaneous
1 Result
Coolant pan, Haas SL-20
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: COOLANT PAN
Shipping Dimensions:, In Crate: 119" x 38" x 24" 443 lbs, Out of Crate: 107" x 29" x 15" 300 lbs.
Blackstone-Ney #AQ-5-1728, ultrasonic parts cleaning system, (5) 17" W x 28" L x 15" H tank, automatic robot, Allen-Bradley CompactLogix PLC, 2010
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Blackstone-Ney
Model: AQ-5-1728
Year: 2010
2010 BLACKSTONE-NEY AQ-5-1728, Allen-Bradley CompactLogix PLC will be used for motion control of the material handling system, Operator interface will be provided by a 10” ...more
Crest Ultrasonics #C0G4-2121, ultrasonic cleaning system, 4 station, robot transfer, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Crest
Model: C0G4-2121
Year: 2006
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of, the machine(s) and accessories ...more
Crest #CAD-1014-HE, ultrasonic vacuum dryer,
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Crest
Model: CAD-1014-HE
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Crest #OC4-1014-HE, 10" W x 14" L x 8" H ultrasonic parts washer, 4 tanks
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Crest
Model: OC4-1014-HE
OC4-1014-HE - Four Stations Optimum Console, Tank Dimensions:, 10" left to right by 14" front to back by 10" deep (8" liquid depth)., Overall Dimensions:, 80" left to right by 34" front to ...more
Crest #SA-2/181212, vapor degreaser, 50 gallon solvent volume, 1999
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Crest
Model: SA-2/181212
Year: 1999
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Crest - Forward Technology SA Prime solvent ultrasonic cleaning system, 10x 10x 12"
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Crest
Year: 1999
This machine is an ideal cleaning system for high volume swiss and screw machines turned parts using oil coolant!, Model 12/18/12, System operated in clean room environment and appears to ...more
Finnsonic #Versa-Genius+50/IV HD VD TD35, automatic 5-stage ultrasonic parts cleaner, Siemens Simatic HMI, 2018
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Finnsonic
Model: VERSA-GENIUS+50/IV
Year: 2018
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Sharper TEK #119-SH8000-400G, 56" x 36" x 45" ultrasonic cleaner, 2021
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Ultrasonic Parts Washers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Sharper
Model: 119-SH8000-400G
Year: 2021
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Universal Cylindrical Grinding Machines
1 Result
13.8" x 25.6" Studer #S30-1, universal cylindrical grinder, 20" wheel, 10 HP, 675 RPM, 2014
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Studer
Model: S30-1
Year: 2014
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Vacuum Industrial Cleaners
1 Result
Ross Cook #CE16-15, comb vacuum system, 3540 RPM, 530 cfm, 68 Degrees Fahrenheit, 15 HP, 230/460 V.
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vacuum Industrial Cleaners
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ross
Model: CE16-15
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
80 CFM, 10" HG, Stokes #149H-10, rotary piston vacuum pump, 490 RPM, 3 HP
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vacuum Pumps
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Stokes
Model: 149H-10
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Vertical CNC Machining Centers
14 Results
Akira-Seiki #Performa-V4, vertical machining center, 22 automatic tool changer, 41.3" X, 21.3" Y, 22" Z, 9000 RPM, #40, 2011
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Akira-Seiki
Model: PERFORMA-V4
Year: 2011
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Daewoo Doosan #VC-3600, vertical machining center, 20 automatic tool changer, 20.5" X, 12.6" Y, 14.2" Z, 12000 RPM, #40, 25 HP, 2020
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Daewoo Doosan
Model: VC-3600
Year: 2021
2021 DOOSAN VC3600, Fanuc CNC Control, (2) Tsudakoma RN 100R-2 High-Speed Multi-Spindle Rotary Tables, Each with Two Spindles, Including all Fanuc Motors, Installation and Integration, with ...more
DMG Sauer #Ultrasonic-20-Linear, 21 automatic tool changer, 8" X, 8.7" Y, 11.2" Z, 42000 RPM, 20 HP, HSK32, Siemens 840D Powerline, Renishaw OMP400 probe, 2008
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Dmg
Model: ULTRASONIC-20-LINEAR
Year: 2008
Work Area, Max. X travels 200 mm, Max. Y travels 220 mm, Max. Z travels 280 mm, Table dimensions, Max. table load 15 kg, Table diameter 250 mm, Workpiece dimensions, Max. workpiece height ...more
Fadal #VMC4020, vertical machining center, 20 automatic tool changer, 40" X, 20" Y, 20" Z, 10000 RPM, #40, 88HS, 1992
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fadal
Model: VMC4020
Year: 1992
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Fadal #VMC4020, 21 automatic tool changer, 40" X, 20" Y, 20" Z, 10000 RPM, #40, 15 HP, Fadal 88HS, 1994
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fadal
Model: VMC4020
Year: 1994
as per OEM brochure. Buyer should verify., Control: Fadal 88HS, Table size: 47.94" x 20", X-axis: 40", Y-axis: 20", Z-axis: 20", Main motor: 15 hp, Spindle speeds: 75 - 10,000 rpm, Atc ...more
Fadal #VMC4020, vertical machining center, 40" X, 20" Y, 20" Z, 15 HP, 10000 RPM, Cat 40
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fadal
Model: VMC4020
Year: 1990
To the best of our knowledge all listed below are deemed correct., It is the buyers responsibility to confirm ALL prior to purchase., Click the link below to view a video demonstration of ...more
Fadal #VMC4020HT, 21 automatic tool changer, 40" X, 20" Y, 20" Z, 10000 RPM, #40, 15 HP, Fadal 88HS, 1995
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Fadal
Model: VMC4020HT
Year: 1995
as per OEM brochure. Buyer should verify., Control: Fadal 88HS, Table size: 47.94" x 20", X-axis: 40", Y-axis: 20", Z-axis: 20", Main motor: 15 hp, Spindle speeds: 75 - 10,000 rpm, Atc ...more
Ganesh #GenMill-T-500, vertical machining center, 21 automatic tool changer, 20" X, 16.9" Y, 12.9" Z, 12000 RPM, BT30, 7.5 HP, 3-Axis, Mitsubishi M830, 2021
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Ganesh
Model: GENMILL-T-500
Year: 2021
Haas #TM-2, vertical machining center, 10 automatic tool changer, 40" X, 16" Y, 16" Z, 4000 RPM, #40, 7.5 HP, 4-Axis HRT-160 rotary table, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: TM-2
Year: 2006
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Haas #VF-0, vertical machining center, 20 automatic tool changer, 20" X, 16" Y, 20" z, 7500 RPM, #40, 10 HP, 26" x 14" table, 1999
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Haas
Model: VF-0
Year: 1999
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Hardinge #VMC-600II, vertical machining center, 24 side mount tool changer, 23.6" X, 20.1" Y, 20.1" Z, 8000 RPM, #40, 17.3 HP, 2000
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Hardinge
Model: VMC-600II
Year: 2000
As Per Brochure (Please Verify ), Video demonstration link: https://www.youtube.com/watch?v=Hmoqzd2Ac2I, Or schedule an in-person inspection, TABLE SIZE 29.5" x 20", MAXIMUM TABLE LOAD 1540 ...more
Leadwell #V25, vertical machining center, 20 automatic tool changer, 25.6" X, 16.1" Y, 16.1" Z, 8000 RPM, #40, 10 HP, 3-Axis, Fanuc 21-M, 30" x 15" table, 1999
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Leadwell
Model: V25
Year: 1999
1999 LEADWELL V-25, Fanuc 21-M CNC Control, Chip Pan, (2) Mill Vices, All Available Tool holders, Original Owner, Immacculate Condition, R&D/Prototyping Shop, **4,750 total hours since ...more
Mori Seiki #DuraCenter-5, 20 automatic tool changer, 31.5" X, 20" Y, 20" Z, 12000 RPM, #40, MSX501 Mapps II, 2006
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Mori Seiki
Model: DURACENTER-5
Year: 2006
“To the best of our knowledge all listed below are deemed correct., It is the buyers responsibility to confirm prior to purchase.”, Control: CNC (MSX-501), X 31.5", Y 20.1", Z ...more
Smart #SV-2, vertical machining center, 30 automatic tool changer, 31.4" X, 19.6" Y, 19.6" Z, 10000 RPM, #40, 20/25 HP, 2021
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical CNC Machining Centers
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Smart
Model: SV-2
Year: 2021
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Barnes Drill #3010, vertical hone, 44" x17" table, 16" capacity, 48" stroke, 2"-10" bore
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Vertical Hones
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Barnes
Model: 3010
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Chomalox #4439-40292, process water heater, 480 V., 3-phase, 43 Amps
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Water Heaters
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Chomalox
480V / 3 / 60, 43 amps.
Tytan #TY-024-208-3-SC, high heat water heater, 144 KW, 208-480 V., 3-phase
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Water Heaters
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Tytan
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Omax #120X, CNC waterjet, 160" X, 120" Y, 8" Z, 100 HP, 60000 psi, 137" x157.5" tbl., 5-Axis, 2017
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Waterjet Cutting
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Omax
Model: 120X
Year: 2017
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
Whirling Machine Threaders
1 Result
Leistritz #PW.065.1.300, CNC whirling machine, 2007
Automatics & Machinery Co Inc | Longmont, CO | Steve Beck |
Category: Whirling Machine Threaders
Seller: Automatics & Machinery Co Inc
Location: Longmont, CO
Mfr: Leistritz
Model: PW.065.1.300
Year: 2007
To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more
