back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Alan Ross Machinery Corp

2715 Deborah Ave.
Zion, IL 60099
Gold Level Dealer
Surplus Record Dealer Since 1973

About

Alan Ross Machinery Corp.,is North America's largest dealer of used and new scrap processing and recycling equipment; over 60% of their business each year is repeat clients. The focus is solutions for processors and recyclers.

Alan Ross Machinery Corp. is a Surplus Record Gold Level Dealer:

1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1973.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy nearly 50 years listing with Surplus Record without unresolved complaint or incident.

Products & Services

  • Conveyors
  • Foundry Equipment
  • Material Handling Equipment
  • Mining Equipment
  • Pipe Threaders
  • Plastic Equipment
  • Pulverizers & Hammermills
  • Recycling/Scrap/Waste Equipment

Associations & Affiliations

612 listings in 89 categories

Harris Waste Management Group #2R-12100L BR-HST, Selco 2 Ram Baler, 62" x 45" x 30" bale size, 100 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: 2-Ram Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris
Model: 2R-12100L
Bale Size: 62" x 45" x 30" - Expanded, 10918111, 100 HP., 12" Main Cylinder (136 Tons of force)., 9" Eject Cylinder., Charging Hopper: 72" x 52"., 429 Gallon Reservoir., Approximate Weight ...more

Harris / Mosley #G200S Gorilla 2 ram horizontal baler, 12" main/9" eject cylinder, 150 HP, 13 sec cycle time

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: 2-Ram Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris
Model: G200S
29"x 60" x 159" Charge Box Opening, 200HP Motor, Per Manufacturer literature:, 12 main cylinder 9 eject cylinder, 150 hp motor, 4 pump system, 13 second cycle time, 109 x 86 hopper opening ...more

Harris #HRB-8-NF, Hydraulic 2 Ram Baler, shear blade, 100 HP, 12" main cylinder

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: 2-Ram Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris
Model: HRB-8-NF
Model HRB-8-NF, Shear Blade, 100HP Motor, 12" Main Cylinder, 9" Ejector Cylinder, 6" Baler Release Cylinder, 3" Tramper Cylinder, 110" L x 58" W Charge Box, Accent Wire Tie.

Harris Equipment #HRB-8, 2-ram baler, includes infeed conveyor, 120" x74" feed opening

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: 2-Ram Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris Equipment
Model: HRB 8
Year: 1985
Includes Infeed Conveyor, Conveyor :, 72" Wide x 50' Long., 25' Long Feed Area, Feed Opening: 120" x 74", Bales Non-Ferrous, Plastics, Paper, OCC, Solid Waste, Etc., Approximate ...more

IPS #TRHE-750-50, Baler w/ Conveyor, 60" x 30" x 48" bale size, 50 HP, 7" cylinder, 60" x 50" hopper opening

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: 2-Ram Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ips
Model: TRHE-750-50
60 x 30 x 48 Appoximate Bale Size, Model TRHE-750, Baler, 50 HP Motor, 7 Cylinder, 60 x 50 Hopper Opening, 153,860 lbs Total Force, Under 7,000 Hours, 4,000 PSI System Pressure, 45 x 31 x ...more

Alan Ross Machinery Corp has 9 more listings in 2-Ram Balers.

45 KVA 480 Primary, 240 Secondary, Jefferson Electric, Step-Up Transformer, dry type

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Jefferson
240 to 480V, Dry Type Energy Efficient Transformer, 380 Lbs, 3 Phase, 60 Hz, Class AA.

AC Variable Frequency Drives

1 Result

Allen Bradley, 1336, Variable Frequency Drive, Sensorless

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allen Bradley
Model: 1336
Model 1336, Sensorless, CUSTOM MANUFACTURED 1336.

Wet H-Duall #HCPA-6000, bed scrubber system, 125 HP, wet packed, used, 2011

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Wet H-Duall
Model: HCPA
Year: 2011
125HP Motor, Model HCPA 6000, Age 2011, Wet Packed.

12" Gensco #320, hydraulic alligator shear, 10 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Gensco
Model: 320
12" Blade Length, Model 320, Approximate Overall Dimensions: 84" x 60" x 64", 10 HP 3/60/220/440 Volt Electric Motor, Approximate Weight: 1800 Lbs..

24" Hydraulic alligator shear, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
24" Long Serrated Blade, Hydraulically Powered, Hold Down, Includes Hydraulic Power Unit & Control.

25" McIntyre, hydraulic alligator shear, 76mm cutting capacity, 3" diameter, heavy duty jaw pivot bearings

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Mcintyre
Model: EUC-640E
Model EUC-640E, 25" Blade, Machine dimensions: 2150 x 890 x 1670mm, Blade Length: 641mm / 25.25, Tip to tip opening: 332mm / 13, Shearing height: 860mm / 33.8, Weight with oil: 3280kg, Oil ...more

36" Lefort hydraulic alligator shear, 350 ton cutting force, 30 HP, 3-1/8" round capacity, 1" x 24" flay cutting capacity

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Lefort
Model: S900
Model S900, 350t Cutting Force, 900mm (35-1/2") blade length., 6750kg (7 Tons) overall weight., 30HP Electric motor (currently has a Lister diesel engine)., 350 Tons cutting force., 3-1/8" ...more

40" Kajman #1000, hydraulic alligator shear, 348 ton force, 23" max opening, new

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kajman
Model: 1000
Approx. 40" Blade (1000 mm), 348 ton-force, Approx. Lead Time 13-15 Weeks, Blade Length: Approx 40 inches (1000 mm), Max Opening: Approx 23 inches (580 mm), Max Force: Approx 348 ton-force ...more

Alan Ross Machinery Corp has 3 more listings in Alligator Shears.

Oxford Instruments #XMET XRF, used analyzer

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Analyzer
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Oxford
Model: XMET
Precious Metals Mode, Model: MPULSE PLUS, mPulse Handheld LIBS Analyzer The first handheld LIBS (laser induced breakdown spectroscopy) analyzer, mPulse, is optimized for the rapid sorting ...more

Condux #H6, tooth disc gridning mill, 50 HP, 600mm grinding discs, attrition & grinding mill

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Attrition Mills
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Condux
Model: H6
600mm Grinding Discs, Attrition & Grinding Mill, 50HP 3/60/480 Volt Electric Motor, Mounted On Steel Base, Fine milling (-100 mesh, +325 mesh products / 30 m to 800 m output) Depending ...more

Balcan #MP6000, bulb recycling plant, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Year: 2010
Processes 2000-3000 Linear Tubes Per Hour, New in 2010, Plant Dimensions: 7.5m x 13.5m, Processes 2000-3000 Linear Tubes Per Hour, Only 1564 Hours of Operation, Electrical Consumption Max: ...more

Branick, truck tire splitter, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: 9999999999999999
Model HD-, Heavy Duty Model, 15HP Motor.

CP Commingled recycling sorting system, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Complete and turn-key, 8-10 tons per hour, Includes the following:, Incline Feed Conveyor, 4 Station Pre-Sort Conveyor, CP Disc Screen, Container Line Sort Conveyor, Trom-Mag, Air ...more

CP single stream recycling sorting system, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Complete and turn-key, 14-18 tons per hour, Includes the following:, Variable Speed Horizontal Pit Conveyor, Incline Feed Conveyor, 14 Station Pre-Sort Conveyor over (4) Steel Wall Bunkers ...more

Jomar, semi tire sidewall tire cutter, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: 9999999999999999
With Hydraulic Unit, x, UNASSIGNED UNASSIGNED.

Alan Ross Machinery Corp has 2 more listings in Auto Shredder Residue Recycling Equipment.

Bar, Pipe and Tube Benders

1 Result

Greenlee #555 Series electric hydraulic heavy conduit bender, 120 VAC, 20 amp

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Greenlee
Model: 555
Hydraulic Heavy Conduit Bender, 555 Series, Per Manufactures Literature, Greenlee 555C :, Power Source: 120 VAC; 20 amp GFCI-protected receptacle, Weight: 260 lbs. (118 kg), Height: 44" ...more

Belt Conveyors

29 Results

5" wide x 20' long, Rubber Belt Conveyor, 5' 6" H discharge

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
5"Wide x 20 Feet long, 5' 6"ft discharge height, Cleated belt.

12" wide x 10' long, Conveyor, Adjustable Height, Chain Drive

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Adjustable Height, Chain Drive, 1/2HP Electric Motor, 3Ph/60Hz/230-460V, Variable Belt Speed Control, E-Stop.

12" wide x 11' long, Conveyor, Adjustable Height, Chain Drive

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Adjustable Height, Chain Drive, 1/2HP Electric Motor, 3Ph/60Hz/230-460V, Variable Belt Speed Control.

12" wide x 12' long, Conveyor, Adjustable Height, Chain Drive

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Adjustable Height, Chain Drive, 1/2HP, 3Ph/60Hz/230-460V, Variable Belt Speed Controls, E-Stop.

12" wide x 18' long, Rapistan mobile conveyor, ribbed belt, vertiable speed belt, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Rapistan
Adjustable Discharge Height, 1.5 HP Motor, 12" Wide Ribbed Belt, Slider Bed is 18' L, Veritable Speed Belt, 208/230/460 3/4 hp.

Alan Ross Machinery Corp has 24 more listings in Belt Conveyors.

Belt Feeder Conveyors

2 Results

12" wide x 4.8' long, Incline feed conveyor, 12" approx drop height

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Large Feed Hopper, Approximate Drop Height: 89", Approximate Width: 11", Approximate Drop Height: 89", Feed Conveyor Approximate Floor Length: 56", Feed Hopper has Approximately 6ft of Belt ...more

48" wide x 30' long, Heavy duty inclined feed conveyor w/cleats, new surplus

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
48" Wide x 30' Long, Cleated Belt--2", One New 48 wide x 30 long heavy duty inclined Feed Conveyor, 14, sides, cleated belt with 2 high cleats on 24 centers, 6 diameter feed roll, with ...more

Roura bins, 37" x 51" taper down to 11" x 23", mechanical hopper release

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Bins
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Roura
QTY: 4, Mechanical Hopper Release, 37"L x 51"W tapered down to 11"W x 23" H, 37"x51"x tapered down to 11"x 23" deep.

Rolling Bins, 43" x 30" x 15" H, 21.5" Wheels Height

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Bins
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Qty: 5, 43"x30.5"x15.5"H, With Wheels Height is 21.5".

No. NF2 Harris Waste Management Group, Briquetter, 12" x 6" x 6" brick, 72" x 30" x 19" box

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Briquetters
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris
Model: NF2
12" x 6" x 6" Approximate Brick, 72" x 30" x 19" Approximate Box, Model: NF2, Running When Removed From Service, Approximate :, 30HP 3/60/220//440 Volt Motor, 10lb Average Bale (Aluminum) ...more

No. NF2 Harris, used briquetter, 30 HP, Vickers hydraulic pump

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Briquetters
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Harris
Model: NF2
12" x 6" x 6" Approximate Brick, 72" x 30" x 19" Approximate Box, Model: NF2, Running When Removed From Service, Approximate :, 30HP 3/60/220//440 Volt Motor, 10lb Average Bale (Aluminum) ...more

No. 15AR D & J briquetter, 12" x 6" x 6"

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Briquetters
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: D & J
Model: 15AR
12" x 6" x 6" Briquetter, Model 15AR, D&J 15AR.

No. 15AR Shoebox briquetter, 7" main cylinder, 9" side cylinder, 30" x 66" loading chamber, completely rebuilt, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Briquetters
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Model: 15AR
30" x 66" Loading Chamber, 7" Main Cylinder, Completely Rebuilt, 7" Main Cylinder, 9" Side Cylinder, 30" x 66" Loading Chamber, New Rack & Ejection System, New 450 Quad Liner Plates ...more

No. 15AR Wendt Corporation, D & J Briquetter, 12" x 6" x 6" size, 48 Tons squeeze

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Briquetters
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Wendt
Model: 15AR
12" x 6" x 6" Briquetter, Model 15AR, From Manufacturer Literature:, Charging Box Area: 72" Long X 30" Wide X 19", Deep Cycle Time: 25 Seconds, Average Bale Weight: 50 lbs., Compression ...more

Alan Ross Machinery Corp has 8 more listings in Briquetters.

Greenberg, used cable stripper

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Cable Strippers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Greeberg
1/16" - 3-1/2" Capacity, Model 312, strips various sizes up to 3", 230/460 Volt, 6 Load Blocks.

Rigby #4H, cable stripper, 4-cutting blades, 3 HP, 3-phase

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Cable Strippers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Rigby
Model: 4H
Model 4H, Four cutting blades, 440-3-60, PER MANUFACTURERS :, The Model 4-H heavy duty cable stripper is the only machine manufactured in North America that has four (4) cutting blades ...more

Rigby #56, Cable Stripper, 3/4" - 6" Capacity, 5 HP, 3 Phase, 240/440 Volt

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Cable Strippers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Rigby
Model: 56
3/4" - 6" Capacity, Model 56, 5HP Electric Motor, 3Phase Electric, 240/440 Volt, Approximate Overall Dimensions: 54" x 36" x 64".

Strip Tech #1500, Cable Stripper, 1/16" - 1" Diameter Capacity, 100 FPM

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Cable Strippers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Strip Tech
Model: 1500
1/16" (20 AWG) - 1" (500 MCM) Diameter Capacity-Maybe Larger?, Approximately 100 Feet Per Minute, Strips Most Types Of Wire, Direct Drive., 1 Hp, Single Phase., Cuts Top and Bottom., Strips ...more

Aramco Portable Can Flattner w/Conveyor, Magnetic Separator Conveyor, 11HP Honda Gas Engine, Truck Mounted

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Can Flatteners
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aramco
Magnetic Separator Conveyor, 11HP Honda Gas Engine, Truck Mounted, Built-In Hopper, 150-200 Lbs per Hour Approximate Capacity, Built-In Magnetic Separator Conveyor, Age Approximatey 2014.

CP 200 Can Flattener, 3000 lb./hr (Aluminum), Magnetic Separator Conveyor, Blower Tube

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Can Flatteners
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Chicago Pneumatic
Approximate Capacity: 3000 Lbs/Hr (Aluminum), Includes Magnetic Separator Conveyor and Blower Tube, 5 HP Blower * 1/2 HP Conveyor Motor, Includes Magnetic Separator Conveyor and Blower Tube.

CP200 can flattener, 4000 lb. of pre-flattening aluminum cans, 2000 lb. of whole cans

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Can Flatteners
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cp200
Model: CP 200/3R
Up To 2000 Lbs Of Whole Cans, Magnetic Separator, Includes Blower, Approximate Capacity Up To 4000 Lbs Of Pre-Flattened Aluminum Cans Per Hour, Up To 2000 Lbs Of Whole Cans, 7 1/2 HP ...more

CP250 can flattener, 2500 lb/hr., 230/3/60, magnetic separator included

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Can Flatteners
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cp250
Model: CP250
2500 Lbs/Hr (Approx. Capacity), Magnetic Separator Included, Density: 7-8 Lbs/Cu Ft 17" Wide Cleated Conveyor Belt 7-1/2 HP Blower Motor 1/3 HP Conveyor Motor 3/4 Cubic Yard Hopper Magnetic ...more

CP250 Can Flattener, 2500 lb./hr capacity, Magnetic Separator

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Can Flatteners
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cp250
2500 Lbs/Hr (Approx. Capacity), Magnetic Separator Included, Density: 7-8 Lbs/Cu Ft 17" Wide Cleated Conveyor Belt 7-1/2 HP Blower Motor 1/3 HP Conveyor Motor 3/4 Cubic Yard Hopper Magnetic ...more

Alan Ross Machinery Corp has 2 more listings in Can Flatteners.

Aljon #9, portable car crusher

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Car Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Model: 9
Model 9, 2 Minute Approximate Cycle Time, Approximate Crushed Car: 6'6" Wide x 9-10" Thick x Original Length of Car, Push Button Controls * Vickers Hydraulics, Takes Complete Car With ...more

Aljon, portable car crusher, diesel, 2008

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Car Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Year: 2008
Fuel Type: Diesel, Year Of Manufacture: 2008, 2003.

Big Mac Portable Car Crusher, 90" Clearance Under Lid, One Minute Cycle, 90 GPM at 2000 RPM, 1975

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Car Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Model: BIG MAC
Year: 1975
90" Clearance Under Lid, One Minute Cycle, One Minute Cycle, 90" Clearance Under Lid, Takes Complete Car with Engine (Can Also Break Engines), Hydraulic System: 90 GPM at 2000 RPM, Total ...more

Big Mac, used portable car crusher, 1 minute cycle takes complete car with engine

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Car Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Big Mac
Model: BIG MAC
See Working, Portable on Trailer, 3Cyl Detroit Diesel, Approximate When It Was New: One Minute Cycle Takes Complete Car with Engine 90 GPM at 2250 PSI at 2000 RPM Hydraulic System Rims, Air ...more

C & C Mfg, Al-Jon Impact V Car Crusher, 240" x 84", Diesel Engine, 8" Bore Cylinder, 1997

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Car Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: C & C
Model: IMPACT V
Year: 1997
Diesel Engine, 8" Bore Cylinder, Overall Dimensions: 43' L x 8' W x 13.5' T, Cummins Diesel 4BT3.9 Engine, 40-Gallon Diesel Tank, Loading Area: 84" W x 240" L, 8" Bore Cylinder ...more

Alan Ross Machinery Corp has 3 more listings in Car Crushers.

Inter-Source, complete chip processing s, 3000 lb/hr aluminum, chip shredder

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Inter-Source
Approx 3000lbs/hr Capacity (Aluminum), Turnings Nest Breaker Auger, Chip Shredder, Rotary Parts Separator, 40" Chip Wringer, Pneumatic Discharge System, Settling Tank, Coolant Collector ...more

Mayfran chip processing system, Mayfran chip hopper, 18" incline screw conveyor, shredder

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Mayfran
Year: 1997
Complete Chip Shredding, Drying System & Oil Recovery System. Includes:, Mayfran Chip Hopper, 18" Incline Screw Conveyor, Separator, Shredder, Chip Wringer, Push Button Control, 1997 ...more

SSI Shredding Systems Inc., inter-source automatic chi, 36", 3500 LPH, Complete System w/Cart Dumper

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ssi Shredding
Approx. 3500 LPH, Complete System With Cart Dumper., Per Manufactures Information:, Coolant wet chips are to be placed directly into a vertical cart dumper as designed and built by ...more

SSI Shredding Systems Inc., inter-source automatic chi, 20", 1500 lb./hr, Complete System w/Cart Dumper

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ssi Shredding
Approx. 1500 lbs/hr, Complete System With Cart Dumper., Coolant wet chips are to be placed directly into a vertical cart dumper as designed and built by Inter-Source. The dumper will feed ...more

CEPA #AS5, chip wringer/spinner, continuous wringer

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Chip Wringers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cepa
Model: AS5
Continuous Wringer, Approx. 600 l/h Throughput In Chips, Per Factory Literature:, Capacity for Steel Swarf: 0.2-0.8 T/H., Motor Speed: 1440 Min., Current Consumption: Max 26/15A., Braking ...more

Prab #24AD, Diagonal Shaft Chip Wringer, low hours, conveyor, Reclaim up to 98% of Valuable Coolant and Cutting Oils

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Chip Wringers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Prab
Model: 24AD
Model 24AD, Reclaim up to 98% of Valuable Coolant and Cutting Oils, [ 2 Available Wringers Can Be Sold Separately - Enquire ], Low Hours, Includes Conveyor, 15HP 3/60/480 Volt Electric ...more

Prab, High Speed Centrifuge, 18" Diameter, Hydraulic Unit

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Chip Wringers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Prab
Surge Bin, Auger Conveyor, Chip Wringer, Controls, Approximatel Throughput Per Factory Literature:, 750lbs/hr Steel Chips, 250lbs/hr Aluminum Chips.

Prab chip wringing system, includes hopper w/sump tank, discharge conveyor, more

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Chip Wringers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Prab
Year: 2008
Capacity approx 400lbs/hr of Aluminum Chips, Per Manufactures Information:, Capacity approx 400lbs/hr of Aluminum Chips, System Includes:, 18" Screw Conveyor, Drip Pan w/ Sump Pump, Rotary ...more

A-Ward Attachments - Award #ACT20, 20' Hydraulic Tilter, 15KW Electric, Digital Scale, Remote control

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: A-Ward
Model: 90R20
Model 90R20, 15KW Electric, Hydraulic Door Arm, Remote Control System, Digital Scale System, Access Ladder with Platform, Approximately 150 Hours.

A-Ward Attachments - Award #ACT20, 20' Hydraulic Tilter, Diesel Gas, Digital scale, Missing Remote, 2008

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: A-Ward
Model: ACT20
Year: 2008
Model ACT20, Used to Load Ocean Vessels, ACT20-R-US-S Tilter 20, New in late 2008, UR Tilter, Digital scale, Diesel Gas, Missing Remote.

Transmodal Concepts, 20' Hydraulic Tilter, Honda Gas Engine, 70000 load. capacity, 2008

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Transmodel
Year: 2008
Honda Gas Engine, 2008 Model, 4 Gang Valvoil Hydraulic Valves, New In 2008, Previously Used To Load Sea Containers, Approx. Dimensions:, 11'11"W x 8'H x 34'L, Shipping weight of ...more

Shipping Containers, 40' L x 8' width x 8' H, Some Say FBZ, Two In Good Shape, Five Need Floor Repair

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Containers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
40' L x 8'W x 8' H--Approximate, Seven Available, Some Say FBZ, Two In Good Shape, Five Need Floor Repair.

Conveyors Vibratory Feeders

5 Results

18" wide x 11' long, Deamco vibratory feeder, 4" deep, fiberglass springs

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Deamco
Model: VCNF-U-18
Model VCNF-U-18, 18" Effective Width Pan, 132" L x 18" W x 4" Deep, Sizing/Sifting Screen Portion: 61"L x 18"W, Fiberglass Springs.

18" wide x 22' long, Vibratory conveyor, 5 HP, 260/480 V. 3 phase 60 Hz electric motor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
22' Long, 18" Wide, 5HP 260/480 Volt 3 Phase 60 Hz Electric Motor.

25" wide x 6' long, Key Technology #Iso-Flow, vibrating conveyor, 48" discharge height, 1.5 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Key
Model: ISO-FLOW
25" Wide x 6' Long Pan, Approx. 5" Sides, 48" Discharge Height, 1.5 HP 3/60 Cycle Electric Motor, Trough Dimensions: 25" W x 72" L x 5" Deep, Smooth Trough Bottom, Stainless Steel, Per ...more

36" wide x 8' long, Kinergy #KDF-36-HD, vibratory feeder, heavy duty, 1/2 HP, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kinergy
Model: KDF-36-HD
Model KDF-36-HD, Heavy Duty, 1/2 HP Motor, 575 V.

60" wide x 21' long, Action Equipment Vibratory Conveyor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Action Equipment
Model: VIBRATING
-, -, Approximate dimension's:, Section 1 13 long X 5 wide X 20 deep, Section 2 18 long X 5 wide X 20 deep, Stroke 7/3, RPM 150, Lincoln motor 20 HP 230/460, 3 Phase.

Crane Equipment and Parts - Miscellaneous

1 Result

Kress Ladle Carrier with Scrap Bucket, self loading/unloading, up to 500 tons capacity

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kress
Self Loading/Unloading, Up to 500 Tons Capacity, Purchased in 2013, lightly used for less than 2 years., There are 2 x Kress Carriers and 3 x Scrap Buckets available for sale., Per ...more

Liebherr #944, big wheel crane, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Crawler Cranes
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Liebherr
Model: 944
x, x, CUSTOM MANUFACTURED UNASSIGNED.

EZ #A+, Portable Car Crusher, 1000" x 20" Tires, 48s Cycle Time, 10" Bore Cylinders, 2013

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ez
Model: A+
Year: 2013
New In 2013, 1000" x 20" Tires, John Deere 6 Cylinder Motor, Tandem Axles in Rear with 5th Wheel Hitch in Front, 20' x 7'6" x 8'1" H Opening, System Pressure - 2400 PSI, Port ...more

Avanguard #FD-35, Styrofoam Densifier, 59" width x 35" T feed opening, Densifies EPS, EPE and EPP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Densifiers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Abanguard
Model: FD-35
Feed Opening 59"W x 35"T, Densifies EPS, EPE and EPP, Per Manufactures Literature:, Densifies Expanded Polystyrene (EPS), Polyethylene (EPE) and Polypropylene (EPP)., Processes Up to 600 ...more

30" width x 60" D x 42" H Load King #V6030, Downstroke Baler

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Load King
Model: V6030
Approximate Bale Size: 30" x 60" x 42" High, Model V6030, Based On Factory Literature:, Approximate Bale Weight: 700 To 900 Lbs, Chamber Size: 30" Deep x 60" Wide x 71" High, Loading ...more

48" width x 30" D x 30" H Bramidan #X25 HD, Downstroke Baler, 48" x 30" x 30" feed opening, 4 ties

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Brami
Model: X25
Feed opening 43" x 21", Bale size 48" x 30" x 30", Per Manufactures Literature:, Bale size WxDxH (inch) 48 x 30 x 30, Feed opening WxH (inch) 43 x 21, Power supply 208/230/480V 3-phase ...more

60" x 30" x 48" McClain / EPCO #E-11, vertical baler, 6" cylinder, 10 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Mcclain
Model: E-11
60" x 30" x 48" Bale Size, 6" Cylinder, Model: Epco E-11, Cylinder: 6", Bale Size: 60" x 30" x 48", Motor: 10 HP 3/60/480.

60" width x 30" D x 48" H Piqua #HD-2200, Hydraulic Downstroke Baler, high density

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Piqua
Model: HD 2200
60" x 30" x 48" Bale Size, Model HD 2200, High Density, Hydraulic Retainer Dogs, Automatic Safety Shut Off, Electric Push Button Controls, Automatic Stops At Both End Of Plunger, Travel 7" ...more

60" width x 30" D x 48" H PTR Baler and Compactor Co #3400, Downstroke Baler, 7" cylinder

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ptr
Model: 3400
60" x 30" x 48" Bale Size, 7" Cylinder, Overall Dimensions: 78" x 46.5" x 152", Cylinder Bore and Rod: 6 x 48, 10 HP Motor, 3 Phase 208/230/460, Feed Height: 54.5, Baler Chamber (Depth x ...more

Alan Ross Machinery Corp has 6 more listings in Downstroke (Vertical) Balers.

Dumpers and Drum Dumpers

8 Results

Allegheny Shredders Corp #HLS 86048, Hydraulic Tipper, 48" Gaylord

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allegheny
Model: HLS
48" Gaylord, Model # HLS 86048, 48" Wide Opening, With Hydraulic Unit, 208 volt, Per Manufacturer's Site:, Motor: 2 Hp TEFC, Voltage: 208/230/460 Volt AC, 3-Phase, 60 cycle ...more

Hercules hydraulic used drum dumper

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hercules
Handles 55 Gallon Drums, 1500 Pound Capacity, UNASSIGNED UNASSIGNED.

Prab Hydraulic Dumper, 28" Width, 2500 lb. Lifting Capacity

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Prab
28" Width, Up to 2,500 lbs Lifting Capacity, Prab Low-Level Cart Dumper:, + Receiving Frame to receive up to 28"x42"L Carts, + Lift Capacity 2,500 lbs, + Controls mounted on dumper, + ...more

Strongarm, used manipulator

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Strongarm
1200 LB Approximate Capacity, 2006 Approximate Age, Pneumatic.

Heavy Duty self dumping hopper, 1.5 cu.yd

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Model: H150W
Model H150W, For metal Scrap, 1.5 Cu yard.

Alan Ross Machinery Corp has 3 more listings in Dumpers and Drum Dumpers.

400 cfm Amerishred #DC1100, used industrial shredder dust collector

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Dust Collectors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Amerishred
Model: DC1100
1 HP Motor, 400 CFM Throughtput, 1 HP Motor, 400 CFM Throughput, Designed to be Integrated with Amerishred Series 1, 2, & 3 Industrial Paper Shredder, Can be Used for Other Industrial ...more

2750 cfm, Kufo Seco #UFO-102B, bag dust collector, 10.4 cu.ft., 3 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Dust Collectors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kufo Seco
Model: UFO-102B
Model UFO-102B, 3HP, Per Factory Literature, LENGTH INCHES 57, HEIGHT INCHES 79, BRAND Kufo Seco, CFM 2750, CONSTRUCTION Steel, HORSEPOWER 3, MANUFACTURERS PART NUMBER UFO-102B, POWER CORD ...more

3000 cfm Dantherm #S-500, baghouse dust collector, 5" WG, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Dust Collectors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dantherm
Model: S-500
3000 CMF, Silent running 1,450 RPM fans, From Factory Literiture, The S-Series dust collector is an enclosure-less, silent and simple to set up dust collector for your wood dust collection ...more

Excavators

8 Results

Fuchs #MHL350, used material handler excavator, includes 5 tine grapple, magnet generator, air conditioned cab

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Excavators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Fuchs
Model: MHL350
Approximately 8000 Hours, New ~ 2009, Includes 5 Tine Grapple, Includes Magnet Generator, Air Conditioned Cab, Can Be Inspected Under Power.

John Deere #200C, w/Labounty Shear, 7600 Hours, MSD 2000 Shear, new engine

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Excavators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: John Deere
Model: 200C
Labounty MSD 2000 Shear, Approx. 7600 Hours, New Engine.

John Deere #350G LC, excavator,,Power Tech PSX 9.0 liter engine, 1.5 yd 4 tine grapple, 271 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Excavators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: John Deere
Model: 350G
Track Drive Train, Cab Riser, Power Tech PSX 9.0 Liter Engine, 1.5 yd 4 Tine Grapple Included, A/C and Heater, Gen Set, 271 HP, 6,833 Hours.

Kobelco #300, Excavator w/Dudley Scrap Shear, 11' 3" OH, 11' 1" OW, 10' 10" tail swing, 8' 6" track gauge, 1999

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Excavators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kobelco
Model: 300
Year: 1999
Model 300, New in 1999, Overall Height (to top of boom): 11' 3", Overall Width: 11' 1", Ground Clearance of Rear End: 3' 11", Ground Clearance: 20", Tail Swing Radius: 10' ...more

Komatsu #490, hydraulic excavator w/Genesis shear, 1000 hours, 2021

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Excavators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Komatsu
Model: 490
Year: 2021
1000 Hours, New in 2021, Great Condition.

Alan Ross Machinery Corp has 3 more listings in Excavators.

1/2" Lab extruder, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
x, x, UNASSIGNED UNASSIGNED.

Hartig extruder, 30:1 L/D pelletizer, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hartig
150 HP Motor, 480 Volts, Non-Vented Extruder, Air Cooled, 150 HP Motor, 480 Volts, DC Drive w/ Screen Changer, 4 1/2" Screw & Barrel Diameter, 11' Long Screw.

New York Blower #Series-60 fan, size 750RT, 100 HP, 380/460 V., 50/60 Hz, 3 phase

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Fans
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: New York Blower
Size 750RT, Used NY Blower/Series 60 Fan, Motor: 100 HP, 3 PH, 380/460 V, 50/60 Hz, Shop # U00553100, Series 60 fan.

Carrier fluid bed dryer, fan, electric heater, 60" x 240" used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Carrier
Year: 2010
Posi Flow * Controls * Age 2010, 3.5 Million BTUs, Fan, Electric Heater.

Cryogenic Freeze Tunnel, 40', Stainless Steel, 600 Volt Motor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Stainless Steel, 600 Volt Motor, Built in the early to mid 90's., Put product in one end at ambient temperature and then nitrogen is used inside the tunnel to quickly lower the ...more

10000 lb. Yale #GLP100MJ, Forklift, 3 Stage Mast, Propane, 4' Lumber Forks, Solid tires, 94" lowered, 185" raised

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Forklifts
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Yale
Model: GLP100MCJSBE088
10,000 Lbs Lifting Capacity, 3 Stage Mast, Propane, Lift Cap: 10,000 lbs, 4' Lumber Forks, Lowered Height: 94", Raised Height: 185", Side Shift, 3 Stage Mast, Solid Tires, Shipping ...more

50000 lb. Taylor #YMOM, diesel forklift trucks, recently mainted by local Taylor dealer

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Forklifts
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Taylor
Model: YMOM

4" x 8" Cumberland used granulator

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Granulators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model 1/2, 4" x 8" Feed Opening, Closed Rotor, 3 Fly & 2 Bed Knives, Was Used Last For Wire, 220 Volt Single Phase., Roller Stand Not Included..

12" x 12" Cumberland used granulator

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Granulators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
12" x 12" 3 Blade Open Rotor, Cumberland granulator/ 2 Bed Knives, 12" x 12" Opening, 7.5hp, 230/460 volts, 3 Phase.

12" x 20" Cumberland used granulator (2 available)

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Granulators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
12" x 20" Feed Opening, 3 Fly & 2 Bed Knives, Closed/Solid Rotor, Direct Drive, 50HP 3/220/440 Volt Electric Motor, Mounted On Steel Base, Feed Hopper, Disconnect.

18" x 18" Heavy Duty used granulator grinder

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Granulators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
100 HP TEFC Motor, Was Used For Plastic, Wood, Paper etc., Available Due To Plant Closing, Approximate Weight: 6500 lbs., May Have Spare Knives, Cutter Adjustment.

18" x 37" Cumberland #1837, Granulator, 5 knife high shear rotor, 2 bed knife, Soft New Start Controls

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Granulators
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 1837
18" x 37" Feed Opening, 5 Fly / 2 Bed Knives, 150HP 3/60/480 Volt Electric Motor (Belt Driven), High Shear Film Rotor.

Alan Ross Machinery Corp has 6 more listings in Granulators.

Best International LLC #H4T, Anvil Grapple, 4 Tines, hydraulic, 1 1/2 Yard, 5000 PSI swivel, 2" Cylinder Pins

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Best
Model: H4T
4 Tines, Hydraulic, Approximately 1 1/2 Yard, Per Manufartures :, Motor s built in cross over relief, Swivel is Rated at 5000 PSI, 2 Inch Cylinder Pins with Wider bushings and Grease Seals.

Hawco #FCH-100-4, 1 yard, orange peel, hydraulic grapple, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hawco
Model: FCH-100-4
4 Tine - Model FCH-100-4, Hydraulic, APPROXIMATE PER FACTORY LITERATURE:, T-1 alloy steel construction, Heat treated pins and bushings, Replaceable manganese alloy tooth points, 360 degree ...more

Hawco clam shell bucket, 1 yard, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hawco
Model: RH100
Model RH100, x, UNASSIGNED RH100.

Labounty #HDR50, 3 tine hydraulic grapple, never used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty
Model: HDR 50
Model HDR 50, Never Used, Per Manufacturer's Literature:, HDR 50 GRAPPLE S, Heavy duty mounting lugs reduce wear on bearings from side loads during operation, Replaceable hardened tine ...more

Labounty heavy duty hydraulic grapple, 2-tine

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty
Model: HOR 100
Model HOR 100 * Weighs 7500 ibs, Was Used on 80000 lb. Excavator, Heavy Duty.

Alan Ross Machinery Corp has 4 more listings in Grapples.

Stainless Steel Hopper with Chopper Shafts, 6' width x 6 ' L, 7.5 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Hoppers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Stainless
7.5 HP Motor, Stainless Steel, National Bulk Equipment Stainless Steel Hopper with bottom chopper shafts, 6' W X 6' L X 6' D, Tapers to bottom choppers to 12" W X 36" L ...more

Cram-A-Lot #HX-72, horizontal baler72" L x 42" W x 48" H, 8" main cylinder, 30 HP, 2008

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cram-A-Lot
Model: HX-72
Year: 2008
30 HP, 2008, Low Hours, CRAM-A-LOT HX-72, Bale Size (L). 72", Bale Size (W). 42", Bale Size (H). 48", Main Cylinder(s) Diameter. 8, Weight. 15,900 lbs.

Custom #HCE3060x48-7, Maxpax horizontal baler, 30" x 42" x 60" approx bale, closed end

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Custom
Model: HCE 3060-48-7
30" x 42" x 60" Approximate Bale Size, Closed End, Manual Tie, 30" x 48" Feed Opening, 7" Cylinder Bore, 10.66 Second Cycle Time (No Load), Approx. 109,681 LBS or Ram Force, 30 HP ...more

Excel #EX63, automatic tie horizontal baler with conveyor, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Excel
Model: 2R63
60" x 48" x 30" Bale Size * Marathon Conveyor 48" x 13', Full Penetration- Feed Opening: 54" x 35", Platen Force, Overall: 159,400 lbs. (72 tonne), Platen PSI: 92 PSI (6.33 BAR), Bale ...more

Excel #Brute, horizontal baler, 10 HP, single/three phase, 220000 lb. baling force, 4250 psi, no control panel, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Excel
Model: BRUTE
10 HP Single/Three Phase, 220,000 lbs Baling Force, THE BRUTE IS DESIGNED TO BALE OFFICE PAPER, NEWSPAPER, OCC, MAGAZINES, PET, HDPE, ALUMINUM CANS, TIN CANS, PAINTED, ALUMINUM SIDING ...more

Excel #EX60, horizontal baler, 60" x 48" x 30" target bale size, 54" x 35" feed opening

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Excel
Model: EX60
60" x 48" x 30" Target Bale Size, Full Penetration- Feed Opening: 54" x 35", Approximate Dimensions: 62" High x 179" Long x 77" Wide, Feed Opening Size: 54" Wide x 35" Long, ARE ...more

Alan Ross Machinery Corp has 12 more listings in Horizontal Balers.

100 Ton, Rousselle press, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Rousselle
Model: 10B80
Model 10B80, Ram: 16x72, 100 Ton Capacity, 22" x 80" Bed Size, Ram: 16x72, Electrics Included, Air Cylinders, Flywheel and Guard, 3/60/220/440 Motor.

1500 Ton, U.S. Industrial hydraulic press, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: U.S. Industrial
149" x 96' Bed, 84" High Opening (Daylight), Approximate Weight: 275 Tons, Approximate Age: 1970's.

700 Ton, Aymas new inclined shear, 12-17 TPH, 160 KW, fully automatic

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aymas
Cutting Force - 700 Tons, Capacity - 12-17 tons/hour*, Per Factory Information:, Cutting Force - 700 Tons, Side Compression Force - 2 x 80 Tons, Clemp Compression Force - 100 Tons, Electric ...more

900 Ton, Aymas new inclined shear, 20-25 17 TPH, 220 KW, fully automatic

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aymas
Cutting Force - 900 Tons, Capacity - 20-25tons/hour*, Per Factory Information:, Cutting Force - 900 Tons, Side Compression Force - 2 x 1200 Tons, Clemp Compression Force - 160 Tons ...more

900 Ton, Sierra #T900, stationary electric shear/baler/logger

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sierra
Model: 900T
New In 2022 * Never Used, Logger/Baler/Shear All In One, Approximate :, The T900 shear/baler/logger is a proven workhorse and that is no empty statement. After 16,000 hours of production ...more

Bonfiglioli #Squalo-2000, stationary shear, 2017

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bonfiglioli
Model: SQUALO-2000
Year: 2017
Up to 25TPH Processing Capacity, 1600T Cutting Force, 7'6" Wide Feed Chute, 50" x 29" Cutting Throat Width, 6CYL Cummins 230HP Diesel Engine, 45 Second Cycle Time (No Load), 4.2 Gal/Hr ...more

Desco #2500, hydraulic tire shear, cuts automatic & semi truck tires, 34" blades

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Desco
Model: 2500
Cuts Auto & Semi Truck Tires, 34" Blades, Self Loading (Hydraulic Lift), Controls, Electric Motor-10HP, Cycle Time: 22 Seconds, Approximate Cutting Capacity: Cuts Auto, Truck, Farm ...more

Inspection Equipment

2 Results

NRT TruSort DXRT, Highest resolution, Touch screen operator, 100TPH, Will require replacement X-Ray bulbs

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Nrt
Sorts Post Consumer Bottles, X-Ray Sortation System, s:, Dual energy X-ray system detects even non-visible material, High throughput process, Highest resolution, Proven precision sort ...more

Steinert US #STXSS 100, X-Ray Sorting System, 40" Sorting Width, 2009

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Steinert
Model: STXSS 100
Year: 2009
Model STXSS 100, Approx. 40" Sorting Width, New In 2009, 480 Volts 60 Cycles, Per Manufactures Literature, Density sorting with the STEINERT XSS T via x-ray transmission under the ...more

Laboratory and Research Equipment

1 Result

Lab Blender, 5 gallon capacity

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Model: LAB BLENDER
5 Gallon Capacity, x, UNASSIGNED UNASSIGNED.

18" Walker circular magnet with chains, 230 VDC, new never used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Walker
18" Diameter, Aluminum Wound, New, Never Used 230V DC Chains Included., 75% Duty Cycle, 3 Amps.

24" Conveyor magnet, 84" long x 24" wide

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
84" Long x 24" Wide, UNASSIGNED 00.

30" Ohio scrap lifting magnet, 75% duty cycle, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ohio
230 DC Volts, 75% Duty Cycle, 30" Diameter, Weight: 1250 Lbs, 75% Duty Cycle, 230V, Amps Cold 14.4, OHMS Cold 16., Approx. 1250 LBS.

30" Stearns scrap lifting magnet, 75% duty cycle, 230 VDC, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Stearns
230 DC Volts, 75% Duty Cycle, 30" Diameter, 75% Duty Cycle, 230V, Amps Cold 15, OHMS Cold 15.3, Approx. Weight 1230lbs.

42" Stearns scrap handling magnet, rectifier included, 230 V.

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Stearns
Rectifier Included, 230 Volt, Heavy Duty Lifting Magnet, Approximate Weight: 3,500lbs.

Alan Ross Machinery Corp has 14 more listings in Lifting Magnets.

10 KW Ohio Magnet Generator, controller, Diesel Motor, 230V DC, 43.5 Amps, Stand Alone Unit

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
10KW, Included Controller, Diesel Motor, 230V DC, 43.5 Amps, Stand Alone Unit.

10" x 18" Surplus Permanent Magnetic Pulley, 1-7/10" Shaft

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
18" Diameter, 10" Face, Approx 1-7/10" Shaft Diameter, Never Used In Production, Still In Original Crate.

12" x 36" Permanent double drum magnet, 150 Degrees , full enclosure w/deflection plates, new

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
12" Dia x 36" Face Ferrite Drum Magnet, 12" Dia x 36" Face Rare Earth Drum Magnet, 150 Degrees of Ceramic 8 Magnet Assembly (Magnet 1), 150 Degrees of Neo 40 Rare Earth Magnet Assembly ...more

24" magnapower rare earth drum magnetic cleaning s, 587mm ferrous outlet, new

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
608mm Magnetic Drum Width, 587mm Ferrous Outlet, Available With Or Without Drive Motor & Gearbox, Designed For Last-Stage Removal Of Ferrous Fines From Granulation & Crushing ...more

24" x 36" Dings magnetic pulley, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
24" Diameter x 36" Face, Permanent Magnet, Magnetic pulley and frame with a 36 wide belt and idlers. There is a two belt 16 diameter drive pulley on one side. Overall width with drive ...more

24" x 48" Dings magnetic pulley, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
24" Diameter x 48" Face, Permanent Magnet, Magnetic pulley and frame with no belt or idlers. There is a 4 grove 24 diameter drive pulley on one side. Overall width with the drive pulley is ...more

Alan Ross Machinery Corp has 2 more listings in Magnetic Pulleys and Drums.

12" Cross belt suspended magnet over Stainless conveyor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cross
Over 12"x12' Stainless Conveyor, x, CUSTOM MANUFACTURED UNASSIGNED.

30" x 60" High Power Cross Belt Magnetic Separator, Self Cleaning, 8" H Suspension, ideal for fast belt speeds

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Ideal for fast belt speeds, Self Cleaning, Fits Crossways Over A 30", 24", 18" Wide Conveyor. Will work for 36" Trough conveyor with 20 Degree Idlers., Self Cleaning (Iron Exits Off The ...more

30" REM CBS-9 Crossbelt Magnet, 1 HP, 3" flights

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Rem
1HP Motor, CBS-9, Conveyor is 8ft from center of pulley shaft to center of tail pulley, Belt is 30" wide with 3" flights., Per Manufactures Information:, s:, Unique plate magnet design ...more

Bollegraph crossbelt magnetic separator w/conveyor, 42" x 10", used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bollegraph
Electro, No Rectifier, Manufactured by Bollegraaf, Made in 2008, Model 28.045/2, Crossbelt Dimensions: 42" x 120", Conveyor Included.

Eddy Current separator, 48" wide, low hours, 2019

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Eddy Current
Year: 2019
Stock Number: 37080, 48"W Used Eddy Current Separator, 2019, Low hours, Spec Sheet:, INDUSTRIAL MAGNETICS ESC481690RA043, Unit will be equipped as follows:, - High polarity fines rotor ...more

Eriez Electro separation magnet, 48" x 48" x 21", used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Eriez
Electro Magnet * High Power, 115 Volt - DC, Model SE D 845, 42" x 42" x 21" Thick Magnet * 3000 Watts, Used For Cross The Belt Magnetic Separation, No Frame, No Motor & Drive, Manual ...more

LGI Eddy Current separator, 12" dia drum, concentrific NDFEB Rare Earth magnetic rotor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Lgi
28" Useable Belt Width, 50" Useable Belt Length, 12" Concentric ECS Rotor, Concentric NdFeB Rare Earth Magnetic Rotor, Adjustable Splitter Box Included, Adjustable Speed Controls For Rotor ...more

Magnapower #ECS600, 24" portable Eddy Current sorting system, eccentric high inductive force rotor design, new

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: ECS600
600mm (24") Effective Sorting Area, Eccentric High Inductive Force Rotor Design, 24" PMDS Top Fed Rare Earth Drum & Feeder, Discharge Conveyor, Support Stand, Base Support For Diesel ...more

Alan Ross Machinery Corp has 12 more listings in Magnetic Separators for Scrap Yard.

20' Hydraulic Unloader, Award, Hectronics remote control system, 3600 psi, 2007

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Award
Year: 2007
Honda Gas Engine, Model ACT20-R, Hectronics Remote Control System, 4 Gang Valvoil Hydraulic Valves, Eaton Hydraulic Pump-3600 PSI, New In 2007, Previously Used To Load Sea Containers.

Front End Loader, Kawasaki, 5 yard, closed cab, Cummins 8.3 liter. 23.5 tires (60% tread life)

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kawasaki
Can Be Seen Under Power, Model 80Z-3, Closed Cab, Cummins 8.3 Liter., 23.5 Tires (60% tread life)., 40,000 Lbs., Heat and Lights., 3rd Valve Hydraulics., Approximate Age: 1998, Approximate ...more

Loader, Kawasaki #60ZV, open cab, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kawasaki
Model: 60ZV
x, x, CUSTOM MANUFACTURED UNASSIGNED.

Material Handling Crane, Volvo #EW180B, 2005, rebuilt 2016

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Volvo
Model: EW180B
Year: 2005
Motor Rebuilt in 2016, 7000 Hours, New in 2005, Engine Volvo D6D EFE2, Rated output, kW (hp) 112 (160), Bucket capacity, m3 0,421,10, Reach (max), m 9,7, Operating weight, t 17,719,5, Motor ...more

Robotic waste sorting, ZenRobotics #ZRR1 heay picker, fully autonomous sorting line

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Zenrobotics
Model: ZRR1
Year: 2016
Never Installed/Factory Surplus/ New in 2016, Multipurpose Waste Sorting Robot for Heavy Material, Per Factory Information:, ZenRobotics Heavy Picker is the worlds first robotic waste ...more

Alan Ross Machinery Corp has 1 more listing in Material Handling Equipment.

Perkins #D7905, vertical lift system, 50 gallon aluminum wash out tank, hose reel kit, 2021

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Perkins
Model: D7905
Year: 2021
Model D7905, 2021, PERKINS D7905, 50gal aluminum wash out tank, hose reel kit.

Raymond #Ultrafine grinding mill, 200 HP Brook Crompton Parkinson motor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mills
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Raymond
Model: ULTRAFINE
200hp Motor -Brook Crompton Parkinson Ltd, 3 Phase/60Hz, Motor: Brook Crompton Parkinson Ltd., Frame: E505UD, No.: X91091??, HP: 200, Type: TEFV, Code: IP54, RPM: 1780, Volt: 440, Amp: 229 ...more

72" x 144" Didion International Inc #RT60-MK5, Slag Separator / Reclaimer, 6' Dia x 12' Long Chamber, Vibratory Conveyor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Didion
Model: RT60
Model RT60 MK5, Approx 6' Dia x 12' Long Chamber, Includes Vibratory Conveyor.

Bunting Quicktron 03 Metal Separator, w/Granulator, Mint Condition

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bunting
Use With Granulator, Mint Condition, New in 2016.

Didion International Inc #MD-50 MK5IV, Rotary Metal Separator, 20 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Didion
Model: MD-50
MD-50 MK5IV, 20HP, 20HP, Fixed Speed, New in 1998.

Didion International Inc, Drum Unit 70011, Discharge Conveyor unit 162070, Feed Conveyor unit 162080, Spare Parts

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Didion
x, x, Drum Unit 70011, Discharge Conveyor unit 162070, Feed Conveyor unit 162080, Spare Parts.

Forsberg #250V Gravity Separating Table, 41.6 sq.ft. deck, 6000 - 18000 CFM, 89" x 100" Floor Size

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Forsberg
Model: 250V
41.6 Sq. Ft. Deck Size, 6000 - 18000 CFM Range, 89" x 100" Floor Size, 3HP 3/60/230/460 Volt Electric Motor, 4200lbs Overall Approximate Weight, Separates material by specific gravity..

Alan Ross Machinery Corp has 4 more listings in Mineral Separators.

Miscellaneous Conveyors

3 Results

Hustler sortline with platform, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hustler
Approximate Age: 2013, Magnetic Separator, In working condition, Consists of:, - 48" W x 59' L Steel Belt Incline Conveyor, - 48" W x 83' L Flat Belt Conveyor w/ Eriez Magnetic ...more

Ingot Casting Conveyor, 40 lb. Ingot, 24' x 20'

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ingot
24" Wide x 20' Long, Casting Conveyor, 40LB Ingot.

Bunting conveyor with D-Coil metal detection, 18" T side guards with UHMW skirting, includes discharge chute

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
18" Tall Sideguards W/UHMW Skirting, Includes Discharge Chute, Per Manufacturer Lit:, 30" wide x 478" long 25 straight incline conveyor. Standard duty formed 3/16" mild steel frame ...more

Miscellaneous Furnaces, Ovens and Parts

2 Results

AK 3500, Sweat Furnace w/Afterburner, Dual Fuel Burner, 400-900 lb./hr, 23" x 35" feed opening

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ak
Model: AK 3500
400-900 Lbs Per Hour Approximate Capacity, Dual Fuel Burner, One Man Operation * Side Feed, Unit Includes Probe & Data Logging Unit, Large Feed & Rake Out Openings Takes Whole ...more

Sweat Furnance, Aluminum King AK 7000, w/afterburners, propane burner, 1 man operation, low profile, 1,000,000 BTU capacity, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aluminum King
Model: SWEAT FURNANCE
Model AK 7000, Oil Burner, Propane Burner, *One Man Operation - New Low Profile For Easy Operation & Loading, *Easily Takes Whole Transmissions, Motor Blocks, Pistons, Lawnmowers, Zinc ...more

Miscellaneous Plastic and Rubber Equipment

1 Result

Dry Cleaning System for plastic, MAS #DRD-18DS, washed without water, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Mas
Model: DRY CLEANING SYSTEM FOR PLASTIC
Model MAS DRD-18 DS, PLC Controls, The MAS DRD 18 DS is a Dry cleaning system for post industrial and post consumer plastic waste streams. The technology is utilized to dry and clean ...more

Miscellaneous Testing Equipment

1 Result

Baird #DV-6, used spectrometer

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Baird
Model: DV-6
Specimen Mounting Block, Computer with Baird Application Software, System Specimen Mounting Block, System to Disperse the Excitation Radiation, Detectors to Measure the Intensity of the ...more

Aljon #400, portable baler-logger, 20" x78" x144" bale chamber, 1000-1200 lb.log density, 25-40 lb. per cu.ft.

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Model: 400
20" x 32" x Variable Bale, Crane with Clam Grapple, Approximate Per Factory Literature:, Bale Chamber: 20" x 6'6" x 12', Approximate Bale Weight: 1,000 to 1,200 Lbs, Log Density ...more

C & C MFG #400, Aljon Portable Baler-Logger, 20" x 32" x Variable Bale, Crane with Clam Grapple

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: C&c
Model: 400
20" x 32" x Variable Bale, Crane with Clam Grapple, Approximate Per Factory Literature:, Bale Chamber: 20" x 6'6" x 12', Approximate Bale Weight: 1,000 to 1,200 Lbs, Log Density ...more

C & C MFG Aljon #400XL, Logger Baler, 84" x 240" x up to 90" Loading Chamber, Low Hours

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: C&c
Model: 400XL
Year: 2006
84" x 240" x up to 90" Loading Chamber, Low Hours, Per Mfg :, 6 - 10 Tons (5 - 9 tonnes) of Loose Scrap Per Hour., Dimensions:, Height: 13 ft. 6 in. (4115 mm)., Width: 8 ft. (2438 mm). ...more

Colmar USA Inc #B5000, Portable Baler/Logger w/Crane, 32" x 24" x Variable Bale Size,

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Colmar
Model: B5000
32" x 24" x Variable Bale Size, Crane w/ Grab, Remote Control, Box Size (OPEN): 16'Long x 6'Wide, Roll Off Portable, Auto Cycle for Baling or Logging, Bales White Goods ...more

Encore Portable Truck Tire Baler, 60" x 60" x 24" bale size, 230/460 Volts

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Encore
Model: TB60
60" x 60" x 24" Approximate Bale Size, 230/460 Volts, Manual Tire Loading, 6.5 Gallon Fuel Tank, Hydaulic Door Locks, Oil & Temp Warning Lights, Bale Ejector Chains, 5-Wire Bale ...more

Alan Ross Machinery Corp has 5 more listings in Mobile Balers.

A-Ward #RMS300 steel shear, 17.7" steel shear jaw opening, 16.5" cut length bewteen jaws, 13.4" jaw cutting length

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: A-Ward
Model: RMS 300
Model RMS 300, 17.7 Inch Jaw Opening, Per Manufacturer's Literature:, Excavator Weight Approx: 33,000lbs, Attachment Weight: 4300 lbs, Steel Shear Jaw Opening: 17.7 inch, Cut Length ...more

Genesis #115R, shear, 16" jaw opening, 18" jaw depth

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Genesis
Model: 115R
16" Jaw Opening, 18" Jaw Depth, 7.8' Reach, 18,000lbs Min Excavator Weight (Boom Mount), 30,000lbs Min Excavator Weight (Stick Mount).

Genesis #GXP 665R, Mobile Shear, 32" Jaw Opening/Depth,

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Genesis
Model: GXP
32" Jaw Opening, 32" Jaw Depth, 12' Reach, 68,000lbs Min Excavator Weight (Boom Mount), 120,000lbs Min Excavator Weight (Stick Mount), 14,700lbs Overall Approx Weight, Rotator.

Iron Axe #IA25R, Mobile Shear, 360 Rotation, 22" jaw opening, 25" jaw depth, 600 Tons, 2012

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Iron Axe
Model: IA25R
Year: 2012
360 Rotation, New in 2012, Weight of Shear 7,100, Minimum Excavator Weight 45,000, Jaw Opening 22", Jaw Depth 25", Cutting Force 600 Ton, Repacked Cylinder, New Turn Motor.

Labounty #MSD70R, mobile shear, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty
Model: MSD
Model MSD 70R, 35" Jaw Opening, Main Cylinder Rebuilt, New Hoses, Approx. Machine Weight 70,000 LBS.

Alan Ross Machinery Corp has 9 more listings in Mobile Shears.

Marquip Pillar Pallet System, Includes 12000 lb. Forklift, Paper Roll Attachments

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Marquip
Includes a 12,000 lb Forklift and Paper Roll Attachments, Makes Corrugated Pillar Pallets, Parts Included In System:, Pillar Pallet Main Operator Station Front Panel, Pillar Pallet Main ...more

Custom pallet wrapper

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Pallet Wrappers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Custom
x, x, CUSTOM MANUFACTURED UNASSIGNED.

60" Downstroke baler, for cardboard, 15 HP, 230 V., 3 phase, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Downstroke Baler,., Used for cardboard., 15 hp, 230 Volts, 3 Phase.

16" Allegheny Bradford #150C, paper shredder, 16" W feed table conveyor, 10 HP, 66 FPM, 230 V., 3 phase, 60 Hz., used (2 available)

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Paper Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allegheny Bradford
Model: 150C
1200 lbs/hr Approximate Capacity, 1/2" Approximate Shred Size, 16" Wide Feed Table Conveyor, 10HP 3/60/230 Volt Electric Motor, 66 FPM Approximate Belt Speed, 3hp 16 inch feed with a 5/16 ...more

16" Allegheny Bradford #Confidential, paper shredder, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Paper Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allegheny Bradford
Model: 16-150
Model 16-150 * With Conveyor, 16" Wide Feed Table Conveyor, 10 HP 3/60/230 Volt Motor, Approximate Weight: 3400 Lbs.

Allegheny #Confidential paper shredder, 20 HP, used, 2006

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Paper Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allegheny
Model: 20-250C
Year: 2006
Model 20-250C, 20" Wide Feed Table Conveyor, 20 HP Motor, Feed Table, Age 2006, Cart Dumper Included, 1-2 Tons Per Hour (Material Dependent), 1/4" Shred.

Amerishred #AMS 4000, Paper Shredding and Baling System, American baler #60A36, 2.5-3 Tons/ hr, 40 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Paper Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allegheny
Model: AMS
AMS 4000 Paper Shredder, American baler company Model # 60A36, AMS 4000 Paper Shredder, 40 HP, 2.5-3 Tons Per Hour, Includes Baler, Bin Tipper - 2 Carts, Sort Conveyor, Amerishred Shredder ...more

International #DT466, paper shred truck, automatic transmission, 60000 miles on truck

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Paper Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: International
Model: DT466
2008 International Truck, Dual Auger shred tech, International Model DT 466, Automatic Transmission, 60,000 Miles on Truck, 2008 International CF 600 TILT CAB, 4.5L L6 DIESEL, Dual auger ...more

Alan Ross Machinery Corp has 4 more listings in Paper Shredders.

5" x 11" Cumberland #1-1/2, granulator, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 1-1/2
Model 1 1/2, 5" x 11" Feed Opening, Rotor: 5 Knife Solid Radial, Bed Knives: D2, Base: Leg, Discharge: Gaylord Gravity, Motor: 15 HP 460 Volt.

8" x 10" Cumberland granulator, 20 HP, closed rotor, 3 fly, 2 bed knives, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
20 HP, 8" x 10" Feed Opening, Closed Rotor, 3 Fly & 2 Bed Knives.

18" x 28" Cumberland granulator with blower, open rotor, 3 knife, 60 HP, heavy duty construction, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 1828
Model 1828 * 18" x 28" Feed Opening, 3 Fly & 2 Bed Knives, Open Rotor, 3 Knife, 60HP/3/60/230 Volt Motor, Infeed Hopper, Cutting Chamber 18"x28", Heavy Duty Construction.

23" x 43" Cumberland #43S, granulator, dual flywheels, 100 HP, mounted on stand, with controls

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 43S
43" Wide Cutting Chamber, 3 Fly Knives & 2 Bed Knives, Approximate 23" x 43" Throat Opening, Dual Flywheels, 100 hp 460 volt, Mounted On Stand, With Controls.

25" x 37" Allsteel Entoleter granulator, closed rotor, 3 fly, 2 bed knives, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Allsteel
Closed Rotor, 3 Fly Knive & 2 Bed Knive, 60 Hp Motor.

Alan Ross Machinery Corp has 3 more listings in Plastic Granulators and Pelletizer Machines.

Asphalt Production Plant. 24' x 50' inclined conveyor, 200 tons/hr

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Asphalt
Inclined conveyor: 24' x 50', Output: 200 tons/hr, Built by Astec Industries Chattanooga TN, USA delivered 1988 and partly 1995, Cold feed system: 6 bins + 2 hot bins, 150 tons ...more

Jacobson #2424, Hammermill, 125 HP, 24" x 24"

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Jacobson
Model: 2424
Model 2424 * DF11, 125HP Motor, Approx Weight, 4500 lbs, Model 2424.

Jeffrey Rader Corporation #610, Hammermill Hog Shredder, 33" x 82" Feed Opening, 24" Diameter Rotor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Jeffrey
Model: 610
33" x 82" Feed Opening, 24" Diameter Rotor, 1500HP 3/60/4160 Volt Electric Motor.

Jeffrey hammermill, 7.5" x 4" rotor, 32" x 2" swing hammers, 34" x 16" product inlet opening front side access to milling chamber & bottom screen heavy duty cast iron split housing, 125 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Jeffrey
125HP, Swing Hammer, 7.5x4 diameter rotor with 32x 2 swing hammers, 34x16 product inlet opening, Front side access to milling chamber and bottom screen, Heavy duty cast iron split housing ...more

Jeffrey hammermill, 23" x 16" product inlet opening front side access to milling chamber & bototm screen 4" air draw vent port installed w/mulit groove sheave & flywheel

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Jeffrey
No Motor, Swing Hammer, 3x8x2(thick) hammers, 23" x 16" product inlet opening, Front side access to milling chamber and bottom screen, 4"air-draw vent port, Installed with multi-groove ...more

Prater Sterling, Hammermill, 100 HP, 30"

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Prater
100HP, Type 30, With Blower, Motor, and Steel Base (Similar to Model G5H51) Rotor Diameter: 30" V Belt Drive Mounted on Steel Beam Base.

Alan Ross Machinery Corp has 7 more listings in Pulverizers and Hammermills.

Can Densifier, Chicago Pneumatic #CD-600, with conveyor, 40 lb./cu.ft. appox density, 18 lb.approx biscuit weight, 10 HP, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Chicago Pneumatic
Model: CD-600
500 to 1000 Lbs/Hr Capacity, 18 Lb Biscuit, Per Factory :, 40lbs/Cu. Ft. Approximate Density, 18lb Approximate Biscuit Weight, 10HP 3/60/220/440 Volt Electric Motor.

Can Densifier, Chicago Pneumatic #CD-2000, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Chicago Pneumatic
Model: CD-2000
2000 Lbs/Hr Capacity, 10" x 13" x 6" Biscuit, Approximate :, Density: 40 Lbs Per Cubic Foot Allowing 140,000 Lbs In 50' Railcars, Or--40,000 Lbs In 40' Trailers.

Can Densifier, Dens A Can #DAC-600, 10 HP, magnetic feed conveyor, fully automatic

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dens A Can
Model: 600
600 Lbs/Hr Capacity, 18 Lb Biscuit * With Conveyor, Model DAC 600, 10 HP Motor, 3/60/Dual voltage. Currently wired for 480 Volt operation., Magnetic Feed Conveyor., Fully Automatic, Biscuit ...more

Can Densifier w/Conveyor, Dens A Can #DAC-1200, 11" x 8" x 10" Biscuit Size, 1200 lb./hr Capacity

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dens A Can
Model: DAC-1200
Biscuit Size 11"X 8"X 10", Conveyor Included (not magnetic), 1,200lbs/hr (up to 2,000) Capacity, Biscuit :, Typical size: 11" x 13" x 9" with extra large integral banding grooves., Weight ...more

Can Densifier, Dens-A-Can, 600 lbs./hr., 18 lb. biscuit, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dens-A-Can
Year: 2014
600 Lbs/Hr Capacity/ New in 2014, 18 Lb Biscuit, Model DAC 600, 10 HP Motor, 3/60/Dual voltage. Currently wired for 480 Volt operation., Magnetic Feed Conveyor., Fully Automatic, Biscuit ...more

Alan Ross Machinery Corp has 6 more listings in Recycling Equipment.

U.S. #2, rotary furnace for metallurgical & ceramic industries, 8000 lb. capacity, flat ring gas fired, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: U.S.
Model 2, W/ Flat Ring Gas Fired, U.S. Rotary Furnace for Metallurgical and Ceramic Industries., Model 2, With Flat Ring Gas Fired, 8000lb Capacity, Original Refactory Lining..

Aljon #400, portable baler/logger, 20" x 32" x 16", Cummins diesel, with clam grapple, 1994

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Model: 400
Year: 1994
20" x 32" x Variable Bale, Crane with Clam Grapple, Approximate Per Factory Literature:, Bale Chamber: 20" x 6'6" x 12', Approximate Bale Weight: 1,000 to 1,200 Lbs, Log Density ...more

Aljon #580, portabler baler, 10' x 19' bailing chamber, portable w/crane, road legal, 166 HP

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Model: 580
Year: 2022
10' x 19' Baling Chamber, Portable w/ Crane & Road "Legal", One Person Operation / High Vis Cab, 166HP John Deere Diesel Engine, L Box Design w/ Stress Relief Welds, 8" Bore Lid ...more

Aljon #580, portable baler, portable w/crane & road legal, 10' x 19' baling chamber, 2022

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aljon
Model: 580
Year: 2022
10' x 19' Baling Chamber, Portable w/ Crane & Road "Legal", One Person Operation / High Vis Cab, 2022, 640 Hours, 166HP Volvo Diesel Engine.

Ambaco #7243H10T50, used automatic tie baler, 43" x 43" x variable bale size, 2007

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Ambaco
Model: 7243H10
Year: 2007
Approx Bale Size: 43" x 43" x Variable, 10" Main Cylinder, New in 2007, 43" x 43" x Variable Bale Size, 72"L x 42"W Hopper Size, 2 x 50 HP Drive Motor, Cycle time: 12.4, Cutting Knife ...more

Aymas #SB-700T, shear baler, 700 ton cut force, 10-15 TPH cut capacity, 15-20 TPH bale capacity, new

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Aymas
Model: SB-700T
10- 15 ton/h (Cutting Capacity), 15 20 ton/h (Baling Capacity), Cutting Force 700 Tons, Side Compression Force 2 x 120 = 240 Tons (each wing), Clemp Compression Force 120 Tons, Pusher Ram ...more

Alan Ross Machinery Corp has 24 more listings in Scrap Baler and Scrap Metal Balers - Ferrous.