back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Sterling Machinery Exchange

9310 Garvey Ave
South El Monte, CA 91733-1097
Platinum Level Dealer
Surplus Record Dealer Since 1970

About

Sterling Machinery Exchange, established in 1954, is best known for fabricating equipment and chip making machinery. One of the largest stocking machinery surplus dealers in Southern California, has an enormous showroom consisting of over 1500 new and used machines that are available for viewing under power for your inspection.

Sterling Machinery Exchange, is a Surplus Record Gold Level Dealer:

1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1970.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy 50 years listing with Surplus Record without unresolved complaint or incident.

Products & Services

  • Blenders
  • CNC Machinery
  • Coil Handling/Processing Equipment
  • Compressors Air & Gas
  • Drills
  • Grinders
  • Ironworkers
  • Lathes
  • Presses
  • Rollformers
  • Rolls
  • Saws
  • Shears
  • Welding Equipment

Associations & Affiliations

Related Accounts Address Contact
Sterling Machinery Exchange South El Monte, CA Adam Mattes

Sterling Machinery Exchange has 196 listings in 35 categories.

Air Compressors, Rotary Screw (Positive Displacement)

3 Results
Image for 73 cfm, 125 psi, Quincy #QGD-15, rotary air compressor, 15 HP, Airlogic 2 controller, #SMQGD15

73 cfm, 125 psi, Quincy #QGD-15, rotary air compressor, 15 HP, Airlogic 2 controller, #SMQGD15

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Quincy
Model: QGD-15
Image for 73 cfm, 175 psi, Quincy Jet #JCP-801, 80 gallon, 5 HP, 2-stage, cast iron pump, #SMJCP801

73 cfm, 175 psi, Quincy Jet #JCP-801, 80 gallon, 5 HP, 2-stage, cast iron pump, #SMJCP801

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Quincy
Model: JCP-801
Image for 320 cfm, 125 psi, Quincy #QGS-75, rotary screw air compressor, 75 HP, air cooled, Air Logic controller, #SMQGS75

320 cfm, 125 psi, Quincy #QGS-75, rotary screw air compressor, 75 HP, air cooled, Air Logic controller, #SMQGS75

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Quincy
Model: QGS-75

Apron and Hand Brakes

18 Results
Image for 18 gauge x 12' National #N14418, tie rods, precision bearings on the apron, new, #SMN14418

18 gauge x 12' National #N14418, tie rods, precision bearings on the apron, new, #SMN14418

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N14418
Image for 16 gauge x 4' National #U4816, extension handles, apron stop for repeat bends, replaceable bushings, new, #SMU4816

16 gauge x 4' National #U4816, extension handles, apron stop for repeat bends, replaceable bushings, new, #SMU4816

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U4816
Image for 16 gauge x 6' National #U7216, (2)large counterweights, precision bearings on the apron, new, #SMU7216

16 gauge x 6' National #U7216, (2)large counterweights, precision bearings on the apron, new, #SMU7216

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U7216

16 gauge x 8' National #N9616, tie rods, precision bearings on the apron, new, #SMN9616

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N9616
Image for 16 gauge x 8' National #U9616, (2)large counterweights, stop for repear bends, precision bearings on the apron, new, #SMU9616

16 gauge x 8' National #U9616, (2)large counterweights, stop for repear bends, precision bearings on the apron, new, #SMU9616

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U9616
Image for 16 gauge x 10' National #N12016, tie rods, precision bearings on the apron, new, #SMN12016

16 gauge x 10' National #N12016, tie rods, precision bearings on the apron, new, #SMN12016

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N12016
Image for 16 gauge x 10' National #U612016, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU612016

16 gauge x 10' National #U612016, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU612016

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U612016
Image for 14 gauge x 8' National #N9614, tie rods, precision bearings on the apron, new, #SMN9614

14 gauge x 8' National #N9614, tie rods, precision bearings on the apron, new, #SMN9614

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N9614
Image for 14 gauge x 8' National #U69614, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU69614

14 gauge x 8' National #U69614, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU69614

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U69614
Image for 14 gauge x 10' National #N12014, tie rods, precision bearings on the apron, new, #SMN12014

14 gauge x 10' National #N12014, tie rods, precision bearings on the apron, new, #SMN12014

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N12014
Image for 12 gauge x 3' National #NA3612, pneumatic, (4)high carbon chromium blades, 40 SPM, new, #SMNA3612

12 gauge x 3' National #NA3612, pneumatic, (4)high carbon chromium blades, 40 SPM, new, #SMNA3612

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: NA3612
Image for 12 gauge x 4' National #N4812, tie rods, precision bearings on the apron, new, #SMN4812

12 gauge x 4' National #N4812, tie rods, precision bearings on the apron, new, #SMN4812

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N4812
Image for 12 gauge x 4' National #NA5212, 4-sided carbon chromium blade, 40 SPM, rear operated manual back gauge, new, #SMNA5212

12 gauge x 4' National #NA5212, 4-sided carbon chromium blade, 40 SPM, rear operated manual back gauge, new, #SMNA5212

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: NA5212
Image for 12 gauge x 4' National #U4812, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU4812

12 gauge x 4' National #U4812, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU4812

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U4812
Image for 12 gauge x 4' National #U64812, (2)large cast iron counterweights, precision bearings on the apron, new, #SMU64812

12 gauge x 4' National #U64812, (2)large cast iron counterweights, precision bearings on the apron, new, #SMU64812

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U64812
Image for 12 gauge x 6' National #7212, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU67212

12 gauge x 6' National #7212, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU67212

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: 7212
Image for 12 gauge x 6' National #N7212, tie rods, precision bearings on the apron, new, #SMN7212

12 gauge x 6' National #N7212, tie rods, precision bearings on the apron, new, #SMN7212

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: N7212
Image for 12 gauge x 6' National #U7212, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU7212

12 gauge x 6' National #U7212, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU7212

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: U7212

Bar and Billet Shears

1 Result
Image for Scotchman #Shear-Master-610, 24" heavy duty flat bar shear, 4-way reversible blades, hydraulic, warranty, new, #smshearmaster610

Scotchman #Shear-Master-610, 24" heavy duty flat bar shear, 4-way reversible blades, hydraulic, warranty, new, #smshearmaster610

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: SHEAR-MASTER-610

Bar, Pipe and Tube Benders

8 Results
Image for 1-1/8" Baileigh #HMB-1125M, mandrel tube bender, 1.125" x.065" OD, 4" CLR, new, #SMHMB1125M

1-1/8" Baileigh #HMB-1125M, mandrel tube bender, 1.125" x.065" OD, 4" CLR, new, #SMHMB1125M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: HMB-1125M
Image for 1-1/8" Baileigh #MPB-10, manual, 3"/5"/7" scroll die, 8.25" round table, bench mounted, new, #SMMPB10

1-1/8" Baileigh #MPB-10, manual, 3"/5"/7" scroll die, 8.25" round table, bench mounted, new, #SMMPB10

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: MPB-10
Image for 1-3/16" x 5/16" Baileigh #MPB-15, flat bar, 3" dia. pin, 5.25" scroll, bench mounted, new, #SMMPB15

1-3/16" x 5/16" Baileigh #MPB-15, flat bar, 3" dia. pin, 5.25" scroll, bench mounted, new, #SMMPB15

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: MPB-15
Image for 1-1/4" Baileigh #MPB-40, 4-piece set, compact size, ornamental scroll/twist/bend/roll/shear, 6.5" scroll die, new, #SMMPB40

1-1/4" Baileigh #MPB-40, 4-piece set, compact size, ornamental scroll/twist/bend/roll/shear, 6.5" scroll die, new, #SMMPB40

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: MPB-40
Image for 2" Baileigh #MCB-650, compact flat bar bender, 200 degree angle capacity, pedestal stand, 7 radius dies, new, #SMMCB650

2" Baileigh #MCB-650, compact flat bar bender, 200 degree angle capacity, pedestal stand, 7 radius dies, new, #SMMCB650

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: MCB-650
Image for 2" Baileigh #RDB-150, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150

2" Baileigh #RDB-150, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: RDB-150
Image for 2" Baileigh #RDB-150-AS, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150AS

2" Baileigh #RDB-150-AS, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150AS

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: RDB-150-AS
Image for 2" Baileigh #RDB-175, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB175

2" Baileigh #RDB-175, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB175

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: RDB-175
Image for ATrump #AONE3VHG, 10" x54" table, variable speed, one shot lube system, 70-4200 RPM, 3 HP, new, #SMAONE3VHG

ATrump #AONE3VHG, 10" x54" table, variable speed, one shot lube system, 70-4200 RPM, 3 HP, new, #SMAONE3VHG

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: AONE3VHG
Image for Birmingham #BPV-3949-C, 9" x49" table, variable speed head, chromed ground quill, 60-4300 RPM, 3 HP, new, #SMBPV3949C

Birmingham #BPV-3949-C, 9" x49" table, variable speed head, chromed ground quill, 60-4300 RPM, 3 HP, new, #SMBPV3949C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: BPV-3949-C

Carbide, Friction and Cold Saws

13 Results
Image for 6" Scotchman #SUP-500NF, 20" blade, upcut circular cold saw, non ferrous extrusion cutting, miter, warranty, new, #SMSUP500NF

6" Scotchman #SUP-500NF, 20" blade, upcut circular cold saw, non ferrous extrusion cutting, miter, warranty, new, #SMSUP500NF

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: SUP-500NF
Image for 9" Scotchman #SUP-600NF, 24" blade, circular cold saw, non ferrous, semi-automatic, precision miter, warranty, new, #SMSUP600NF

9" Scotchman #SUP-600NF, 24" blade, circular cold saw, non ferrous, semi-automatic, precision miter, warranty, new, #SMSUP600NF

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: SUP-600NF
Image for 10-3/4" Scotchman #CPO-275, circular cold saw, high turn, maunal vise & downfeed, miter, 2 speed, warranty, new, (7 available)

10-3/4" Scotchman #CPO-275, circular cold saw, high turn, maunal vise & downfeed, miter, 2 speed, warranty, new, (7 available)

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-275
Image for 10-3/4" Scotchman #CPO-275-SSPK, circular cold saw, single phase, 1 speed, power vise, manual downfeed, warranty, new, #SMCPO275SSPK

10-3/4" Scotchman #CPO-275-SSPK, circular cold saw, single phase, 1 speed, power vise, manual downfeed, warranty, new, #SMCPO275SSPK

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-275-SSPK
Image for 12" Doringer #D300, circular cold saw, low turn, quick acting manual vise, manual downfeed, recirculating coolant system, new, #SMD300

12" Doringer #D300, circular cold saw, low turn, quick acting manual vise, manual downfeed, recirculating coolant system, new, #SMD300

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doringer
Model: D300
Image for 12" Scotchman #CPO-315-HFA, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315HFA

12" Scotchman #CPO-315-HFA, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315HFA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-HFA
Image for 12-1/2" Scotchman #CPO-315-RFA, circular cold saw, non ferrous, automatic vise clamp. & power downfd, warranty, new, #SMCPO315RFASTNF (2 available)

12-1/2" Scotchman #CPO-315-RFA, circular cold saw, non ferrous, automatic vise clamp. & power downfd, warranty, new, #SMCPO315RFASTNF (2 available)

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-RFA
Image for 12-1/2" Scotchman #CPO-315-RFA/ST, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315RFAST

12-1/2" Scotchman #CPO-315-RFA/ST, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315RFAST

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-RFA/ST
Image for 13-1/2" Scotchman #CPO-350-NF, circular cold saw, non ferrous, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350NF (4 available)

13-1/2" Scotchman #CPO-350-NF, circular cold saw, non ferrous, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350NF (4 available)

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-350-NF
Image for 14" Acra #FHC370T, circular cold saw, low turn, manual vise & downfeed, tool vise, 35-105 RPM, 3 HP, new, #SMFHC370T

14" Acra #FHC370T, circular cold saw, low turn, manual vise & downfeed, tool vise, 35-105 RPM, 3 HP, new, #SMFHC370T

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: FHC370T
Image for 14" DoAll #SC-100A, auto.circular, PLC control for electric & hydraulic functions, 30-150 RPM, 15 HP, new, #SMSC100A

14" DoAll #SC-100A, auto.circular, PLC control for electric & hydraulic functions, 30-150 RPM, 15 HP, new, #SMSC100A

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: SC-100A
Image for 14" Doringer #D350, circular cold saw, low turn, quick acting manual vise, manual downfeed, 3 HP, coolant system, new, #SMD350

14" Doringer #D350, circular cold saw, low turn, quick acting manual vise, manual downfeed, 3 HP, coolant system, new, #SMD350

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doringer
Model: D350
Image for 14" Scotchman #CPO-350, circular cold saw, high turn, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350HT (9 available)

14" Scotchman #CPO-350, circular cold saw, high turn, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350HT (9 available)

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: CPO-350
Image for 1-1/4" Baileigh #MPB-275, 1/2" x2" flat bar, bidirectional, RDB-250, 6 RPM, lifetime tech support, 4 shear pin, new, #SMMPB275

1-1/4" Baileigh #MPB-275, 1/2" x2" flat bar, bidirectional, RDB-250, 6 RPM, lifetime tech support, 4 shear pin, new, #SMMPB275

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Baileigh
Model: MPB-275

CNC Engine Lathes

1 Result
Image for 24" x 40" Atrump #RL-2440NC, 2-Axis CNC, 3-Jaw 12" chuck, Centroid T400i with 15" Color LCD, 10 HP, new, #SMRL2440NC

24" x 40" Atrump #RL-2440NC, 2-Axis CNC, 3-Jaw 12" chuck, Centroid T400i with 15" Color LCD, 10 HP, new, #SMRL2440NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: RL-2440NC

CNC Horizontal Spindle Surface Grinders

1 Result
Image for 12" x 24" Acra #ASG-1224AHD, 3-Axis, surface grinder (Okamoto Style), electromagnetic chuck, automatic demag controller, new, #SMASG1224AHD

12" x 24" Acra #ASG-1224AHD, 3-Axis, surface grinder (Okamoto Style), electromagnetic chuck, automatic demag controller, new, #SMASG1224AHD

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: ASG-1224AHD

CNC Lasers

7 Results
Image for Cincinnati #CL-440, 4000 watt, CO2 laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL440

Cincinnati #CL-440, 4000 watt, CO2 laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL440

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Cincinnati
Model: CL-440
Image for Cincinnati #CL-940, 4000 watt, fiber laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL940

Cincinnati #CL-940, 4000 watt, fiber laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL940

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Cincinnati
Model: CL-940
Image for Nukon #ECOS-Line PRO3151K, 1000 watt, CNC fiber laser cutting, hydraulic blocks, sheet holder, new, #SMECOSLINEPRO3151K

Nukon #ECOS-Line PRO3151K, 1000 watt, CNC fiber laser cutting, hydraulic blocks, sheet holder, new, #SMECOSLINEPRO3151K

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Nukon
Model: ECOS-LINE
Image for Nukon #ECOS-Line PRO3152K, 2000 watt, CNC control unit, hyd.blocks, sheet holder, new, #SMECOSLINEPRO3152K

Nukon #ECOS-Line PRO3152K, 2000 watt, CNC control unit, hyd.blocks, sheet holder, new, #SMECOSLINEPRO3152K

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Nukon
Model: ECOS-LINE
Image for Nukon #NFPRO3153K, 3000 watt, CNC fiber laser cutting, hyd.blocks, dust filtration system, 32 HP, new, #SMNFPRO3153K

Nukon #NFPRO3153K, 3000 watt, CNC fiber laser cutting, hyd.blocks, dust filtration system, 32 HP, new, #SMNFPRO3153K

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Nukon
Model: NFPRO3153K
Image for Nukon #NFPROVENTO315, 4000 watt, CNC fiber laser cutting, hyd.blocks, 42 HP, new, #SMNFPROVENTO315

Nukon #NFPROVENTO315, 4000 watt, CNC fiber laser cutting, hyd.blocks, 42 HP, new, #SMNFPROVENTO315

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Nukon
Model: NFPROVENTO315
Image for Nukon #NFPROVENTO420, 6000 watt, CNC fiber laser cutting, suction system, 80 HP, new, #SMNFPROVENTO420

Nukon #NFPROVENTO420, 6000 watt, CNC fiber laser cutting, suction system, 80 HP, new, #SMNFPROVENTO420

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Nukon
Model: NFPROVENTO420

CNC Lathes and Turning Centers

3 Results
Image for Atrump #KL2180, 21" swing, 80" between centers, coolant, 10 HP, new

Atrump #KL2180, 21" swing, 80" between centers, coolant, 10 HP, new

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: KL2180
Image for Atrump #KL30120, 30" swing, 20 HP, Centroid T400i Control, coolant, 331-1500 RPM, #SMKL30120, New

Atrump #KL30120, 30" swing, 20 HP, Centroid T400i Control, coolant, 331-1500 RPM, #SMKL30120, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: KL30120
Image for Atrump #S25L, 19" swing, 25 collet chuck, 0.9" bar, Centroid T400I Control w/15" LCD, new, #SMS25L

Atrump #S25L, 19" swing, 25 collet chuck, 0.9" bar, Centroid T400I Control w/15" LCD, new, #SMS25L

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: S25L

CNC Press Brakes

6 Results
Image for 90 Ton, Cincinnati #90BX8, 10' overall, baseform hydraulic 3-Axis CNC, Touch Screen human machine interface, new, #SM90BX8

90 Ton, Cincinnati #90BX8, 10' overall, baseform hydraulic 3-Axis CNC, Touch Screen human machine interface, new, #SM90BX8

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Cincinnati
Model: 90BX8
Image for 90 Ton, Cincinnati #90MX6, 6' overall, MaxForm CNC hydraulic, 7-Axis, 7" throat, 20 HP, new, #SM90MX6

90 Ton, Cincinnati #90MX6, 6' overall, MaxForm CNC hydraulic, 7-Axis, 7" throat, 20 HP, new, #SM90MX6

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Cincinnati
Model: 90MX6
Image for 90 Ton, Cincinnati #90PF+6, 8' overall, Proform CNC hydraulic, 15" Color LCD display w/Touchscreen interface, 15 HP, new, #SM90PF6

90 Ton, Cincinnati #90PF+6, 8' overall, Proform CNC hydraulic, 15" Color LCD display w/Touchscreen interface, 15 HP, new, #SM90PF6

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Cincinnati
Model: 90PF+6
Image for 110 Ton, Comeq Primeline #S110B10, 10.1' overall, 122.1" between columns, 10.24" stroke, 15.75" throat, new, #SMS110B10

110 Ton, Comeq Primeline #S110B10, 10.1' overall, 122.1" between columns, 10.24" stroke, 15.75" throat, new, #SMS110B10

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Comeq
Model: S110B10
Image for 250 Ton, Comeq Primeline #S250B10, 10.1' overall, 102.4" between columns, 10.24" stroke, 15.75" throat, new, #SMS250B10

250 Ton, Comeq Primeline #S250B10, 10.1' overall, 102.4" between columns, 10.24" stroke, 15.75" throat, new, #SMS250B10

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Comeq
Model: S250B10
Image for 350 Ton, Comeq Primeline #S350C10, 10.1' overall, 102.4" between columns, 12.20" stroke, 19.68" throat, new, #SMS350C10

350 Ton, Comeq Primeline #S350C10, 10.1' overall, 102.4" between columns, 12.20" stroke, 19.68" throat, new, #SMS350C10

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Comeq
Model: S350C10

CNC Tool and Cutter Grinders

2 Results
Image for Atrump #TD-2, 11" x5", BT40, 100-2500 RPM, PLC 2-Axis controller, 19" TFT monitor, 1 HP, new, #SMTD2

Atrump #TD-2, 11" x5", BT40, 100-2500 RPM, PLC 2-Axis controller, 19" TFT monitor, 1 HP, new, #SMTD2

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: TD-2
Image for Atrump, IPC w/650M 5-Axes controller with 15" LCD, oil coolant system, work light, new, #SMTR520

Atrump, IPC w/650M 5-Axes controller with 15" LCD, oil coolant system, work light, new, #SMTR520

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump

CNC Vertical Bed Mills

1 Result
Image for Acra MillPower #LCM-50 MillPWR 3AX, 3-Axis CNC, hard chrome ways, one shot lube system, new, #SMLCM50MILLPWR3AX

Acra MillPower #LCM-50 MillPWR 3AX, 3-Axis CNC, hard chrome ways, one shot lube system, new, #SMLCM50MILLPWR3AX

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: LCM-50

Die Cutting Press Machines

6 Results
Image for 8 Ton, APMC #APM-SA8, hydraulic clicker press, 15.7" x31.5" bed, quick height adjustment, dual joystick, stroke setting timer, #SMAPMSA8

8 Ton, APMC #APM-SA8, hydraulic clicker press, 15.7" x31.5" bed, quick height adjustment, dual joystick, stroke setting timer, #SMAPMSA8

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: APM-SA8
Image for 22 Ton, Apmc #APM-SA22, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA22

22 Ton, Apmc #APM-SA22, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA22

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: APM-SA22
Image for 27 Ton, Apmc #APM-SA27L, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA27L

27 Ton, Apmc #APM-SA27L, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA27L

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: APM-SA27L
Image for 39 Ton, APMC #USA-TH3079-35U, 5.9 stroke, 7.1" daylight, head press, polypropylene cutting pad, #SMTH307935U

39 Ton, APMC #USA-TH3079-35U, 5.9 stroke, 7.1" daylight, head press, polypropylene cutting pad, #SMTH307935U

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: USA-TH3079-35U
Image for 40 Ton, APMC #USA-FH3163-40M, 7.1 stroke, 9.1" daylight, hydraulic clicker press, #SMFH316340M

40 Ton, APMC #USA-FH3163-40M, 7.1 stroke, 9.1" daylight, hydraulic clicker press, #SMFH316340M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: USA-FH3163-40M
Image for 80 Ton, Apmc #USA-FH3563-80M, 7.1 stroke, hydraulic, clicker press, 4-post, single manual slide table, New, #SMFH356380M

80 Ton, Apmc #USA-FH3563-80M, 7.1 stroke, hydraulic, clicker press, 4-post, single manual slide table, New, #SMFH356380M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Apmc
Model: USA-FH3563-80M

Disc Sanders

1 Result
Image for 20 Acra #DS-20, disc sander, stand, mitering table, 1720 RPM, 2 HP, new, #SMDS20

20 Acra #DS-20, disc sander, stand, mitering table, 1720 RPM, 2 HP, new, #SMDS20

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Disc Sanders
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: DS-20

Double Pinch Plate Rolling Machines

8 Results
Image for 4' x 16" gauge Birmingham #X-5016C, manual slip roll, 3:1 gear ratio, (3)wire grooves, new, #SMX5016C

4' x 16" gauge Birmingham #X-5016C, manual slip roll, 3:1 gear ratio, (3)wire grooves, new, #SMX5016C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: X-5016C
Image for 4' x 16" gauge National #NR4816, forward & reverse drum switch, front gear, foot switch, stand, 7.5 HP, new, #SMNR4816

4' x 16" gauge National #NR4816, forward & reverse drum switch, front gear, foot switch, stand, 7.5 HP, new, #SMNR4816

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: NR4816
Image for 4' x 1/4" GMC #HBR-0425, 5-7/8" roll diameter, 3 HP, tool box, forward/reverse, #SMHBR0425

4' x 1/4" GMC #HBR-0425, 5-7/8" roll diameter, 3 HP, tool box, forward/reverse, #SMHBR0425

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Gmc
Model: HBR-0425
Image for 4.3' x 16" gauge Birmingham #X-5016E-C, light duty power slip roll, standard 3-wire grooves, foot pedestal stand, new, #SMX5016EC

4.3' x 16" gauge Birmingham #X-5016E-C, light duty power slip roll, standard 3-wire grooves, foot pedestal stand, new, #SMX5016EC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: X-5016E-C
Image for 6' x 16" gauge National #NR7216, hydraulic, forward & reverse drum switch, front gear, 1 HP, new, #SMNR7216

6' x 16" gauge National #NR7216, hydraulic, forward & reverse drum switch, front gear, 1 HP, new, #SMNR7216

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: NR7216
Image for 6.6' x 1/4" Birmingham #RH-0606, hydraulic plate bending double pinch roll, LED position indicator, new, #SMRH0606

6.6' x 1/4" Birmingham #RH-0606, hydraulic plate bending double pinch roll, LED position indicator, new, #SMRH0606

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: RH-0606
Image for 10' x 1/4" Birmingham #RH-1006, heavy duty hydraulic bending roll double pinch, LED position indicator, new, #SMRH1006

10' x 1/4" Birmingham #RH-1006, heavy duty hydraulic bending roll double pinch, LED position indicator, new, #SMRH1006

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: RH-1006
Image for 10' x 1/2" Quantum #G3014-C, double pinch hydraulic 3-Roll, plate bender, digital display, permanent lube system, new, #SMG3014C

10' x 1/2" Quantum #G3014-C, double pinch hydraulic 3-Roll, plate bender, digital display, permanent lube system, new, #SMG3014C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Quantum
Model: G3014-C
Image for 14"/20" x 40" Acra #1440SVS, precision AC vari-engine lathe, 6" 3-Jaw, 8" 4-Jaw, 30-2500 RPM, 5 HP, new, #SM1440SVS

14"/20" x 40" Acra #1440SVS, precision AC vari-engine lathe, 6" 3-Jaw, 8" 4-Jaw, 30-2500 RPM, 5 HP, new, #SM1440SVS

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1440SVS
Image for 17"/24" x 40" Acra #1740TE, precision engine, 8-speed, 8" 3-Jaw, 10" 4-Jaw, 70-1800 RPM, Steady Rest, 5 HP, new, #SM1740TE

17"/24" x 40" Acra #1740TE, precision engine, 8-speed, 8" 3-Jaw, 10" 4-Jaw, 70-1800 RPM, Steady Rest, 5 HP, new, #SM1740TE

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1740TE
Image for 17"/24" x 43" Acra #1743GFEL, 10" 3-Jaw chuck, 12" 4-Jaw chuck, 35-2000 RPM, Steady Rest, 4-way tool post, 7.5 HP, new, #SM1743GFEL

17"/24" x 43" Acra #1743GFEL, 10" 3-Jaw chuck, 12" 4-Jaw chuck, 35-2000 RPM, Steady Rest, 4-way tool post, 7.5 HP, new, #SM1743GFEL

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1743GFEL
Image for 18"/28" x 60" Acra #1860C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1860C

18"/28" x 60" Acra #1860C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1860C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1860C
Image for 18"/28" x 80" Acra #1880C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1880C

18"/28" x 80" Acra #1880C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1880C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1880C
Image for 21"/31" x 120" Acra #21120C, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM21120C

21"/31" x 120" Acra #21120C, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM21120C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 21120C
Image for 26"/35-3/8" x 90" Acra #2690ACH, precision engine, 3-Jaw 15" chuck, 4-way tool post, 13-1200 RPM, 15 HP, new, #SM2690ACH

26"/35-3/8" x 90" Acra #2690ACH, precision engine, 3-Jaw 15" chuck, 4-way tool post, 13-1200 RPM, 15 HP, new, #SM2690ACH

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 2690ACH
Image for 32" x 120" Acra #SET32120, high speed heavy duty engine lathe, 20" 3-Jaw chuck, coolant system, new, #SMSET32120

32" x 120" Acra #SET32120, high speed heavy duty engine lathe, 20" 3-Jaw chuck, coolant system, new, #SMSET32120

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: SET32120
Image for 9" x 17" W.F. Wells #W-9-1, vari-hydraulic, 70-380 SFPM, horizontal bandsaw, 3 HP, Coolant, New

9" x 17" W.F. Wells #W-9-1, vari-hydraulic, 70-380 SFPM, horizontal bandsaw, 3 HP, Coolant, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: W.F. Wells
Model: W-9-1
Image for 10" x 16" DoAll #400S, miter cutting heavy duty metal, spring loaded blade tension handwheel, new, #SM400S

10" x 16" DoAll #400S, miter cutting heavy duty metal, spring loaded blade tension handwheel, new, #SM400S

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: 400S
Image for 10" x 18" Acra #RF-1018S, step pulley speed control, laser guide, coolant system, 2 HP, new, #SMRF1018S

10" x 18" Acra #RF-1018S, step pulley speed control, laser guide, coolant system, 2 HP, new, #SMRF1018S

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: RF-1018S
Image for 11" x 11-3/4" DoAll #DC-280NC, fully automatic, PLC control for all-electric, 5 HP, new, #SMDC280NC

11" x 11-3/4" DoAll #DC-280NC, fully automatic, PLC control for all-electric, 5 HP, new, #SMDC280NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-280NC
Image for 13" x 15" DoAll #DC-330NC, fully automatic, PLC control for all electric, 5 HP, new, #SMDC330NC

13" x 15" DoAll #DC-330NC, fully automatic, PLC control for all electric, 5 HP, new, #SMDC330NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-330NC
Image for 13" x 15" DoAll #DC-330SA, semi-auto high production, hyd.blade tensions, 66-262 FPM, 5 HP, new, #SMDC330SA

13" x 15" DoAll #DC-330SA, semi-auto high production, hyd.blade tensions, 66-262 FPM, 5 HP, new, #SMDC330SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-330SA
Image for 13" x 18" Hyd-Mech #S20P, pivot style, cast-iron head, easy swing, 36" material in-feed roller, semi-auto control, new

13" x 18" Hyd-Mech #S20P, pivot style, cast-iron head, easy swing, 36" material in-feed roller, semi-auto control, new

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Hyd-Mech
Model: S20P
Image for 14" x 20" DoAll #500SNC, swivel head heavy duty miter cutting, auto.feed, 5 HP, new, #SM500SNC

14" x 20" DoAll #500SNC, swivel head heavy duty miter cutting, auto.feed, 5 HP, new, #SM500SNC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: 500SNC
Image for 16" x 16" DoAll #DC420NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC420NC

16" x 16" DoAll #DC420NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC420NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC420NC
Image for 16" x 20" W.F. Wells #F16-1, 60-425 SFPM, variable hydraulic, 7.5 HP, 3-Phase, New

16" x 20" W.F. Wells #F16-1, 60-425 SFPM, variable hydraulic, 7.5 HP, 3-Phase, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: W.F. Wells
Model: F- 16-1
Image for 18" x 20" DoAll #DC-460NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC460NC

18" x 20" DoAll #DC-460NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC460NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-460NC
Image for 19" x 22" DoAll #DC-500SA, semi-auto high production, hyd.blade tension, 66-262 FPM, 7.5 HP, new, #SMDC500SA

19" x 22" DoAll #DC-500SA, semi-auto high production, hyd.blade tension, 66-262 FPM, 7.5 HP, new, #SMDC500SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-500SA
Image for 20" x 24" Wells #H-2024-1, 60-500 SFPM, 7.5 HP, 3 Phase, 115 V., semi-automatic, New

20" x 24" Wells #H-2024-1, 60-500 SFPM, 7.5 HP, 3 Phase, 115 V., semi-automatic, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Wells
Model: H-2024-1
Image for 22" x 24" DoAll #DC-560NC, fully automatic, PLC control for all electric, 10 HP, new, #SMDC560NC

22" x 24" DoAll #DC-560NC, fully automatic, PLC control for all electric, 10 HP, new, #SMDC560NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-560NC
Image for 22" x 31" DoAll #DC-560SA, semi-auto high production, hyd.blade tension, set of 6' roller stands, 10 HP, new, #SMDC560SA

22" x 31" DoAll #DC-560SA, semi-auto high production, hyd.blade tension, set of 6' roller stands, 10 HP, new, #SMDC560SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-560SA
Image for 22" x 48" W.F. Wells #M-36-3, semi-automatic hyd.swivel base, miter, 60-500 SFPM, 15 HP, new, #SMM363

22" x 48" W.F. Wells #M-36-3, semi-automatic hyd.swivel base, miter, 60-500 SFPM, 15 HP, new, #SMM363

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Wells
Model: M-36-3
Image for 24" x 20" W.F. Wells #H-2024HA-CNC, fully automatic w/shuttle type barfeed horiz.twin post, 10 HP, new, #SMH2024HACNC

24" x 20" W.F. Wells #H-2024HA-CNC, fully automatic w/shuttle type barfeed horiz.twin post, 10 HP, new, #SMH2024HACNC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: W.F. Wells
Model: H-2024HA-CNC
Image for 27" x 31" DoAll #DC-700NC, fully automatic, PLC control for all electric & hyd.functions, 15 HP, new, #SMDC700NC

27" x 31" DoAll #DC-700NC, fully automatic, PLC control for all electric & hyd.functions, 15 HP, new, #SMDC700NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-700NC
Image for 31" x 39" DoAll #DC-800NC, Continental Series, fully automatic high production, 52-275 FPM, 15 HP, new, #SMDC800NC

31" x 39" DoAll #DC-800NC, Continental Series, fully automatic high production, 52-275 FPM, 15 HP, new, #SMDC800NC

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-800NC
Image for 31" x 39" DoAll #DC-800SA, Continental Series, semi-automatic high production, 15 HP, new, #SMDC800SA

31" x 39" DoAll #DC-800SA, Continental Series, semi-automatic high production, 15 HP, new, #SMDC800SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-800SA
Image for 37" x 40" Wells #S-40-3C, semi-automatic hydraulic, vari-speed, coolant, New, #SMS403C

37" x 40" Wells #S-40-3C, semi-automatic hydraulic, vari-speed, coolant, New, #SMS403C

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Wells
Model: S-40-3C
Image for 43" x 43" DoAll #DC-1100SA, semi-auto high production, variable vise pressure, 49-262 FPM, 15 HP, new, #SMDC1100SA

43" x 43" DoAll #DC-1100SA, semi-auto high production, variable vise pressure, 49-262 FPM, 15 HP, new, #SMDC1100SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-1100SA
Image for 51" x 67" DoAll #DC-1700SA, Continental Series dual column semi-automatic high production, 20 HP, new, #SMDC1700SA

51" x 67" DoAll #DC-1700SA, Continental Series dual column semi-automatic high production, 20 HP, new, #SMDC1700SA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Doall
Model: DC-1700SA

Horizontal CNC Machining Centers

1 Result

Atrump #LH-117-Centroid, 24 automatic tool changer, 43.3" X, 35" Y, 27" Z, 4500 RPM, 3-Axis, 25 HP, 27.6" x49.6" table, new

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Atrump
Model: LH-117-CENTROID

Horizontal Spindle Reciprocating Surface Grinders

6 Results
Image for 6" x 18" Chevalier #FSG-2A618, fully automatic precision hydraulic, 2-Axis, 16-82 FPM, 3.3 HP, new, #SMFSG2A618

6" x 18" Chevalier #FSG-2A618, fully automatic precision hydraulic, 2-Axis, 16-82 FPM, 3.3 HP, new, #SMFSG2A618

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Chevalier
Model: FSG-2A618
Image for 6" x 18" Chevalier #FSG-618M, manual, Halogen light, 18-62 FPM, 3450 RPM, new, #SMFSG618M

6" x 18" Chevalier #FSG-618M, manual, Halogen light, 18-62 FPM, 3450 RPM, new, #SMFSG618M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Chevalier
Model: FSG-618M
Image for 8" x 18" Chevalier #FSG-3A818, fully automatic precision hydraulic, 3-Axis, 16-82 FPM, 5 HP, new, #SMFSG3A818

8" x 18" Chevalier #FSG-3A818, fully automatic precision hydraulic, 3-Axis, 16-82 FPM, 5 HP, new, #SMFSG3A818

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Chevalier
Model: FSG-3A818
Image for 12" x 24" Acra #1224HS, fully automatic, grinding wheel, 3-Axis, 1750 RPM, 5 HP, new, #SM1224HS

12" x 24" Acra #1224HS, fully automatic, grinding wheel, 3-Axis, 1750 RPM, 5 HP, new, #SM1224HS

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1224HS
Image for 12" x 24" Chevalier #FSG-3A1224, 3-Axis fully automatic feed, hydraulic, 10 HP, new, #SMFSG3A1224

12" x 24" Chevalier #FSG-3A1224, 3-Axis fully automatic feed, hydraulic, 10 HP, new, #SMFSG3A1224

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Chevalier
Model: FSG-3A1224
Image for 16" x 32" Acra #1632HS, fully automatic, grinding wheel, 2-Axis, 1750 RPM, 7.5 HP, new, #SM1632HS

16" x 32" Acra #1632HS, fully automatic, grinding wheel, 2-Axis, 1750 RPM, 7.5 HP, new, #SM1632HS

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: 1632HS

Hydraulic Drill Presses

1 Result
Image for 22" Acra #MDP-435VA, floor drill with powered down feed, #4MT, 125-4000 RPM, 2 HP, new, #SMMDP435VA

22" Acra #MDP-435VA, floor drill with powered down feed, #4MT, 125-4000 RPM, 2 HP, new, #SMMDP435VA

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Acra
Model: MDP-435VA

Ironworkers

20 Results
Image for 3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 6-6/8" throat, 1.5" stroke, 4.5 HP, foot pedal, New, #SMMICROCROP36

3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 6-6/8" throat, 1.5" stroke, 4.5 HP, foot pedal, New, #SMMICROCROP36

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: MICROCROP-36
Image for 3" x 3" x 5/16" Scotchman #Porta Fab 45, hyd.ironworker, 45 ton, 4-1/2" throat, 3 in 1 combo tool, warranty, new, #SMPORTAFAB45

3" x 3" x 5/16" Scotchman #Porta Fab 45, hyd.ironworker, 45 ton, 4-1/2" throat, 3 in 1 combo tool, warranty, new, #SMPORTAFAB45

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: PORTA
Image for 3" x 3" x 3/8" Piranha #P-50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50

3" x 3" x 3/8" Piranha #P-50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Piranha
Model: P-50
Image for 3" x 3" x 3/8" Scotchman #DO-135/220-24M, ironworker, 135 ton, dual operation, 12" throat, made in the USA, new, #SMDO13522024M

3" x 3" x 3/8" Scotchman #DO-135/220-24M, ironworker, 135 ton, dual operation, 12" throat, made in the USA, new, #SMDO13522024M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO-135/220-24M
Image for 4" x 4" x 3/8" Scotchman #5014-ET, 50 ton, 3-station revolving turret, 2" die holders, new, #SM5014ET

4" x 4" x 3/8" Scotchman #5014-ET, 50 ton, 3-station revolving turret, 2" die holders, new, #SM5014ET

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: 5014-ET
Image for 5" x 5" x 3/8" Geka #Bendicrop-60s, 60 ton, 10" throat, 3/4" stroke, 7.5 HP, New

5" x 5" x 3/8" Geka #Bendicrop-60s, 60 ton, 10" throat, 3/4" stroke, 7.5 HP, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: BENDICROP-60S
Image for 5" x 5" x 3/8" Geka #Bendicrop-85S, 90 ton, 12" throat, 1" stroke, 13.5 HP, 5 stations, New

5" x 5" x 3/8" Geka #Bendicrop-85S, 90 ton, 12" throat, 1" stroke, 13.5 HP, 5 stations, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: BENDICROP-85S
Image for 5" x 5" x 3/8" Piranha #P65, hydraulic, 65 ton, automatic hold down, punch holder, 7.5 HP, new, #SMP65

5" x 5" x 3/8" Piranha #P65, hydraulic, 65 ton, automatic hold down, punch holder, 7.5 HP, new, #SMP65

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Piranha
Model: P65
Image for 5-1/8" x 5-1/8" x 1/2" Geka #Hydracrop-80SD, 88 ton, hydraulic, 5 stations, foot pedals, New

5-1/8" x 5-1/8" x 1/2" Geka #Hydracrop-80SD, 88 ton, hydraulic, 5 stations, foot pedals, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: HYDRACROP-80SD
Image for 6" x 6" x 3/8" Scotchman #6509-24M, 65 ton, 3/4" str, hydraulic ironworker, 24" length, die holder, shear table, new, #SM650924M

6" x 6" x 3/8" Scotchman #6509-24M, 65 ton, 3/4" str, hydraulic ironworker, 24" length, die holder, shear table, new, #SM650924M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: 6509-24M
Image for 6" x 6" x 1/2" Scotchman #912-24M, ironworker, 90 ton, angle shear, punch station, 3 yr manufacturers warranty, new, #SM901224M

6" x 6" x 1/2" Scotchman #912-24M, ironworker, 90 ton, angle shear, punch station, 3 yr manufacturers warranty, new, #SM901224M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: - 912-24M
Image for 6" x 6" x 1/2" Scotchman #12012-24M, 120 ton hydraulic ironworker, 12" throat, rod shear, warranty, new, #SM1201224M

6" x 6" x 1/2" Scotchman #12012-24M, 120 ton hydraulic ironworker, 12" throat, rod shear, warranty, new, #SM1201224M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: 12012-24M
Image for 6" x 6" x 1/2" Scotchman #DO-70/110-24M, dual operator ironworker, 70 ton, 9" throat, made in the USA, new, #SMDO7011024M

6" x 6" x 1/2" Scotchman #DO-70/110-24M, dual operator ironworker, 70 ton, 9" throat, made in the USA, new, #SMDO7011024M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO- 70/110-24M
Image for 6" x 6" x 1/2" Scotchman #DO-95/140-24M, dual operator ironworker, 95 ton, 9" throat, made in the USA, new, #SMDO9514024M

6" x 6" x 1/2" Scotchman #DO-95/140-24M, dual operator ironworker, 95 ton, 9" throat, made in the USA, new, #SMDO9514024M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO- 95/140-24M
Image for 6" x 6" x 1/2" Scotchman #DO-120/200-24M, dual operation hydraulic ironworker, 120 ton, 12" throat, USA, new, #SMDO12020024M

6" x 6" x 1/2" Scotchman #DO-120/200-24M, dual operation hydraulic ironworker, 120 ton, 12" throat, USA, new, #SMDO12020024M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO-120/200-24M
Image for 6" x 6" x 1/2" Scotchman #DO-150/240-24M, dual operation hydraulic ironworker, 150 ton, 12" throat, new, #SMDO15024024M

6" x 6" x 1/2" Scotchman #DO-150/240-24M, dual operation hydraulic ironworker, 150 ton, 12" throat, new, #SMDO15024024M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO-150/240-24M
Image for 6" x 6" x 1/2" Scotchman #DO-8514-20M, dual operation hydraulic ironworker, 85 ton, 14" throat, warranty, new, #SMDO851420M

6" x 6" x 1/2" Scotchman #DO-8514-20M, dual operation hydraulic ironworker, 85 ton, 14" throat, warranty, new, #SMDO851420M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: DO-8514-20M
Image for 6" x 6" x 1/2" Scotchman #FI-8510-20M, 85 ton ironworker, adjustable electric stroke Control w/scale, warranty, new, #SMFI851020M

6" x 6" x 1/2" Scotchman #FI-8510-20M, 85 ton ironworker, adjustable electric stroke Control w/scale, warranty, new, #SMFI851020M

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Scotchman
Model: FI-8510-20M
Image for 8" x 8" x 3/4" Geka #Hydracrop-165SD, 185 ton, 24" throat, 4" stroke, 20 HP, foot pedals, New

8" x 8" x 3/4" Geka #Hydracrop-165SD, 185 ton, 24" throat, 4" stroke, 20 HP, foot pedals, New

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: HYDRACROP-165SD
Image for Geka #Puma-110SD, 120 ton, 29.5" throat, 0.75" stroke, 20 HP, New, #SMPUMA110SD

Geka #Puma-110SD, 120 ton, 29.5" throat, 0.75" stroke, 20 HP, New, #SMPUMA110SD

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Geka
Model: PUMA-110SD
Image for 16 gauge x 4' National #NH5216, cast iron side frames, steel cutter heads & tables, front supports, 3 HP, new, #SMNH5216

16 gauge x 4' National #NH5216, cast iron side frames, steel cutter heads & tables, front supports, 3 HP, new, #SMNH5216

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: National
Model: NH5216
Image for 14 gauge x 8.4' Birmingham #H10014, deluxe hydraulic, (2)14" side gauges, 24" BG, 22 SPM, 5 HP, new, #SMH10014

14 gauge x 8.4' Birmingham #H10014, deluxe hydraulic, (2)14" side gauges, 24" BG, 22 SPM, 5 HP, new, #SMH10014

Sterling Machinery Exchange, South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
City: South El Monte, CA
Mfr: Birmingham
Model: H10014