Sterling Machinery Exchange - New Mach.
9310 Garvey Ave
South El Monte, CA 91733-1097
South El Monte, CA 91733-1097
Platinum Level Dealer
Surplus Record Dealer Since 1970
Contact
About
Sterling Machinery Exchange, established in 1954, is best known for fabricating equipment and chip making machinery. One of the largest stocking machinery surplus dealers in Southern California, has an enormous showroom consisting of over 1500 new and used machines that are available for viewing under power for your inspection.Sterling Machinery Exchange, is a Surplus Record Gold Level Dealer:
1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1970.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy 50 years listing with Surplus Record without unresolved complaint or incident.
Products & Services
- Blenders
- CNC Machinery
- Coil Handling/Processing Equipment
- Compressors Air & Gas
- Drills
- Grinders
- Ironworkers
- Lathes
- Presses
- Rollformers
- Rolls
- Saws
- Shears
- Welding Equipment
Associations & Affiliations
| Related Accounts | Address | Contact |
|---|---|---|
| Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
184 listings in 35 categories
18 gauge x 12' National #N14418, tie rods, precision bearings on the apron, new, #SMN14418
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N14418
Capacity Mild Steel18 Ga.Capacity Stainless Steel22 Ga.Bending Length145"Dimensions (W x L x H)29" x 201" x 59"Weight3450 Lbs. ...more
16 gauge x 4' National #U4816, extension handles, apron stop for repeat bends, replaceable bushings, new, #SMU4816
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U4816
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Max. Lift of Beam1-1/4"Finger Width2" - 3" - 4"Max. Depth Of Box4"Bending ...more
16 gauge x 6' National #U7216, (2)large counterweights, precision bearings on the apron, new, #SMU7216
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U7216
Bending Length73"Max. Depth Of Box4"Finger Width2" - 3" - 4"Capacity Stainless Steel20 Ga.Capacity Mild Steel16 Ga.Dimensions (W x ...more
16 gauge x 8' National #N9616, tie rods, precision bearings on the apron, new, #SMN9616
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N9616
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Bending Length97"Dimensions (W x L x H)27" x 143" x 55"Weight1600 LBS. ...more
16 gauge x 8' National #U9616, (2)large counterweights, stop for repear bends, precision bearings on the apron, new, #SMU9616
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U9616
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Finger Width2" - 3" - 4"Max. Depth Of Box4"Bending Length97"Dimensions (W x ...more
16 gauge x 10' National #N12016, tie rods, precision bearings on the apron, new, #SMN12016
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N12016
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Bending Length121"Dimensions (W x L x H)29" x 177" x 59"Weight2800 LBS. ...more
16 gauge x 10' National #U612016, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU612016
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U612016
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Max. Depth Of Box6"Bending Length121"Dimensions (W x L x H)29" x 177" ...more
14 gauge x 8' National #N9614, tie rods, precision bearings on the apron, new, #SMN9614
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N9614
Capacity Mild Steel14 Ga.Capacity Stainless Steel18 Ga.Bending Length97"Dimensions (W x L x H)27" x 153" x 59"Weight1750 LBS. ...more
14 gauge x 8' National #U69614, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU69614
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U69614
Capacity Mild Steel14 Ga.Capacity Stainless Steel18 Ga.Max. Depth Of Box6"Bending Length97"Weight2800 LBS. EQUIPPED WITH. Two Large Cast Iron ...more
14 gauge x 10' National #N12014, tie rods, precision bearings on the apron, new, #SMN12014
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N12014
Capacity Mild Steel14 Ga.Capacity Stainless Steel18 Ga.Bending Length121"Dimensions (W x L x H)29" x 177" x 59"Weight3200 LBS. ...more
12 gauge x 3' National #NA3612, pneumatic, (4)high carbon chromium blades, 40 SPM, new, #SMNA3612
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NA3612
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Type:PneumaticMax. Cutting Length36"Back GaugeRear Operated Manual BackgaugeStrokes Per Minute40Dimensions (W x L ...more
12 gauge x 4' National #N4812, tie rods, precision bearings on the apron, new, #SMN4812
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N4812
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Bending Length49"Weight1050 Lbs. EQUIPPED WITH. Tie RodsPrecision Bearings On The Apron ...more
12 gauge x 4' National #NA5212, 4-sided carbon chromium blade, 40 SPM, rear operated manual back gauge, new, #SMNA5212
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NA5212
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Type:PneumaticMax. Cutting Length52"Back GaugeRear Operated Manual BackgaugeStrokes Per Minute40Dimensions (W x L ...more
12 gauge x 4' National #U4812, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU4812
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U4812
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Finger Width2" - 3" - 4"Max. Depth Of Box4"Bending Length49"Dimensions (W x ...more
12 gauge x 4' National #U64812, (2)large cast iron counterweights, precision bearings on the apron, new, #SMU64812
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U64812
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Max. Depth Of Box6"Bending Length49"Dimensions (W x L x H)27" x 95" ...more
12 gauge x 6' National #7212, heavy duty, (2)large cast iron counterweights, apron stop for repeat bends, new, #SMU67212
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: 7212
Max. Depth Of Box6"Capacity Stainless Steel16 Ga.Capacity Mild Steel12 Ga.Bending Length73"Dimensions (W x L x H)29" x 126-1/2" ...more
12 gauge x 6' National #N7212, tie rods, precision bearings on the apron, new, #SMN7212
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: N7212
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Bending Length73"Weight1800 Lbs.Dimensions (L x W x H)129 x 27 x 59 ...more
12 gauge x 6' National #U7212, (2)large counterweights, stop for repeat bends, precision bearings on the apron, new, #SMU7212
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Apron and Hand Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: U7212
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Finger Width2" - 3" - 4"Max. Depth Of Box4"Bending Length73"Dimensions (W x ...more
Scotchman #Shear-Master-610, 24" heavy duty flat bar shear, 4-way reversible blades, hydraulic, warranty, new, #smshearmaster610
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar and Billet Shears
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: SHEAR-MASTER-610
Shearing Capacity:1" x 12", 3/4" x 16", 1/2" x 24"TypeHydraulicStrokes Per MinuteFull Stroke12Half Stroke30Back GaugeElectric Back GaugeOptional Equipment ...more
1-1/8" Baileigh #HMB-1125M, mandrel tube bender, 1.125" x.065" OD, 4" CLR, new, #SMHMB1125M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: HMB-1125M
Dimensions (L x W x H)72" x 44" x 68"Stainless Steel1.0" x 0.065"Capacities Round (OD).Maximum CLR4"Minimum CLR0.075"Maximum Bend ...more
2" Baileigh #RDB-150, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150
Overall Capacity2".Schedule 40Mild Steel Pipe2"Aluminum Pipe2"Stainless Steel Pipe1.5"Mild Steel Round Tube2.5"Mild Steel Round Tube Wall0.125"Aluminum Round Tube2.5"Aluminum Round ...more
2" Baileigh #RDB-150-AS, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150AS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150-AS
Overall Capacity2".Schedule 40Mild Steel Pipe2"Aluminum Pipe2"Stainless Steel Pipe1.5"Mild Steel Round Tube2.5"Mild Steel Round Tube Wall0.125"Aluminum Round Tube2.5"Aluminum Round ...more
2" Baileigh #RDB-175, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB175
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-175
Overall Capacity2".Schedule 40Mild Steel Pipe2"Aluminum Pipe2"Stainless Steel Pipe1.5"Mild Steel Round Tube2.5"Mild Steel Round Tube Wall0.125"Aluminum Round Tube2.5"Aluminum Round ...more
Bed and Knee Milling Machines - Vertical
2 Results
ATrump #AONE3VHG, 10" x54" table, variable speed, one shot lube system, 70-4200 RPM, 3 HP, new, #SMAONE3VHG
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: AONE3VHG
Table Size10" x 54"Load Capacity704 Lbs.Longitudinal Travel (X Axis)36.37"Cross Travel (Y Axis)15.75"Vertical Knee Travel (Z Axis)16"Ram Travel19"Spindle TaperR-8Speed ...more
Birmingham #BPV-3949-C, 9" x49" table, variable speed head, chromed ground quill, 60-4300 RPM, 3 HP, new, #SMBPV3949C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: BPV-3949-C
Table Size9" x 49"T-Slot Number , Size3 , 5/8"Longitudinal Traverse Hand Only35-1/2"Longitudinal Traverse Power Feed33"Cross Travel13-1/4"Vertical Knee Travel16"Ram ...more
Carbide, Friction and Cold Saws
13 Results
6" Scotchman #SUP-500NF, 20" blade, upcut circular cold saw, non ferrous extrusion cutting, miter, warranty, new, #SMSUP500NF
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: SUP-500NF
Material Type:Non Ferrous MetalsMaximum Blade Diameter20"Feed Type:Fully AutomaticCapacityRound Tube (45 Degree)6"Round Tube (90 Degree)7"Square Tube (45 Degree)4-3/4"Square Tube ...more
9" Scotchman #SUP-600NF, 24" blade, circular cold saw, non ferrous, semi-automatic, precision miter, warranty, new, #SMSUP600NF
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: SUP-600NF
Material Type:Non Ferrous MetalsMaximum Blade Diameter24"Feed Type:Semi-AutomaticCapacity24"Round Tube (45 Degree)9"Round Tube (90 Degree)9"Square Tube (45 Degree)7"Square Tube (90 ...more
10-3/4" Scotchman #CPO-275, circular cold saw, high turn, maunal vise & downfeed, miter, 2 speed, warranty, new, (7 available)
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-275
Material Type:FerrousMaximum Diameter Blade:10 - 3/4"HT Cutting Speeds60/120 RPMFeed Type:ManualTubing:Round90 Degree3 - 3/8"45 Degree2 - 3/4"Square90 Degree3" x ...more
10-3/4" Scotchman #CPO-275-SSPK, circular cold saw, single phase, 1 speed, power vise, manual downfeed, warranty, new, #SMCPO275SSPK
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-275-SSPK
Material Type:FerrousMaximum Diameter Blade:10 - 3/4"Cutting Speeds LT30/60 RPMFeed Type:ManualTubing:Round90 Degree3 - 3/8"45 Degree2 - 3/4"Square90 Degree3" x ...more
12" Doringer #D300, circular cold saw, low turn, quick acting manual vise, manual downfeed, recirculating coolant system, new, #SMD300
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doringer
Model: D300
Material Type:FerrousBlade Size12"Feed Type:ManualBlade Speeds (2)54 - 108 RPMCutting Capacity:90 degree 45 degreeSolids2.5" MaxSquare Tube3.3", 3"Round Tube3.75", 3.5"Horsepower2.5 ...more
12" Scotchman #CPO-315-HFA, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315HFA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-HFA
Material Type:FerrousMaximum Saw Blade Diameter12 - 1/2"Feed Type:Fully AutomaticMaximum Cut LengthSingle Index 30", Double IndexTubingRoundUp To 3 - ...more
12-1/2" Scotchman #CPO-315-RFA, circular cold saw, non ferrous, automatic vise clamp. & power downfd, warranty, new, #SMCPO315RFASTNF (2 available)
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-RFA
Material Type:Non Ferrous MetalsMaximum Saw Blade12 - 1/2"Minimum Cut Length1 - 1/4"Maximum Cut Length60"Feed Type:Fully AutomaticCutting Speeds3,000 RPMRound ...more
12-1/2" Scotchman #CPO-315-RFA/ST, circular cold saw, vari-speed, automatic vise clamping & power downfeed, warranty, new, #SMCPO315RFAST
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-315-RFA/ST
Material Type:FerrousMaximum Saw Blade12 - 1/2"Feed Type:Fully AutomaticSpeeds (Variable)11 - 177 RPMRound Tube3 - 1/2"Round Solid2"Square Tube3 - ...more
13-1/2" Scotchman #CPO-350-NF, circular cold saw, non ferrous, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350NF (4 available)
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-350-NF
Material Type:Non Ferrous MetalsMaximum Diameter Blade14"Feed Type:ManualCutting Speeds1500 & 3000 RPMArbor Bore1 - 9/16"Pin Spacing4/12/64Motor RateLow RPM 3 ...more
14" Acra #FHC370T, circular cold saw, low turn, manual vise & downfeed, tool vise, 35-105 RPM, 3 HP, new, #SMFHC370T
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: FHC370T
Material Type:FerrousBlade Size12"~14 1/2"Head SwivelL45 90 R45Clamping ViseSingleCoolant Pump Motor40 WFeed Type:ManualBlade RPM35~105 RPMVoltage220V AC / 3 PHMain ...more
14" DoAll #SC-100A, auto.circular, PLC control for electric & hydraulic functions, 30-150 RPM, 15 HP, new, #SMSC100A
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: SC-100A
Cutting CapacityRound4.0" x 0.39"Rectangle0.39" - 3.15" x 0.39" - 3.15"Blade Size0.102" x 0.089" x 14.2"Blade Speeds30 - 150 ...more
14" Doringer #D350, circular cold saw, low turn, quick acting manual vise, manual downfeed, 3 HP, coolant system, new, #SMD350
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doringer
Model: D350
Material Type:FerrousBlade Size14"Feed Type:ManualBlade Speeds (2)54 - 108 RPMCutting Capacity:Solids2.5" @ 90 Degrees/ 2.5" @ 45 DegreesSquare Tube4" ...more
14" Scotchman #CPO-350, circular cold saw, high turn, manual vise & downfeed, miter, 2 speed, warranty, new, #SMCPO350HT (9 available)
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: CPO-350
Material Type:FerrousMaximum Diameter Blade14"Feed Type:ManualHT Cutting Speeds44/88 RPMArbor Bore1 - 9/16"Square45 Degree1 - 3/4" x 1 - 3/4"90 ...more
CNC Bar, Pipe and Tube Benders
1 Result
1-1/4" Baileigh #MPB-275, 1/2" x2" flat bar, bidirectional, RDB-250, 6 RPM, lifetime tech support, 4 shear pin, new, #SMMPB275
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: MPB-275
Weight750 lbsCapacityRound Solid1"Square Solid1" x 1"Flat Bar (Easy Way)1/2" x 2"Round Pipe (Schedule 40)1-1/4"Maximum Bend Speed180 Degrees in ...more
24" x 40" Atrump #RL-2440NC, 2-Axis CNC, 3-Jaw 12" chuck, Centroid T400i with 15" Color LCD, 10 HP, new, #SMRL2440NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: RL-2440NC
Basic DimensionsHeight of Centers12"Swing Over Bed24"Swing Over Cross Slide16"Distance Between Centers40"Bed Width13.78".SPINDLESpindle NoseD1-8Spindle Bore3-3/8"Spindle TaperMT #7Range of Spindle ...more
CNC Horizontal Spindle Surface Grinders
1 Result
12" x 24" Acra #ASG-1224AHD, 3-Axis, surface grinder (Okamoto Style), electromagnetic chuck, automatic demag controller, new, #SMASG1224AHD
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: ASG-1224AHD
Capacity12" x 24"Maximum Grinding (WXL)12" x 28"Maximum Distance from Spindle Center Line to Table Top27-1/2"TABLEChuck Size (WXL)12" x ...more
Cincinnati #CL-440, 4000 watt, CO2 laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL440
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: CL-440
Table Size60" x 120"Table Load Capacity2,292 Lbs.Cutting CapacitiesNitrogen22 Ga. to 1/4"Oxygen18 Ga. to 1"Excited CO2 Resonator4000 Watts DCMachine ...more
Cincinnati #CL-940, 4000 watt, fiber laser cutting system, HMI 15" Color LCD Touch Screen, 5' x10' dual pallets, new, #SMCL940
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: CL-940
Table Size60" x 120"Table Load Capacity2,292 Lbs.Max. Workpiece DimensionsX Axis120"Y Axis60"Z Axis2-1/2" Above Each PalletCutting CapacitiesNitrogen20 Ga. to ...more
Nukon #ECOS-Line PRO3151K, 1000 watt, CNC fiber laser cutting, hydraulic blocks, sheet holder, new, #SMECOSLINEPRO3151K
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Nukon
Model: ECOS-LINE
Capacity1000 WattsCutting CapacitiesMild Steel.315"Stainless Steel.157"Aluminum.157"Copper.0787"Galvanized Steel.098"Brass.118"Laser Source IPG100,000 HoursMaximum Output2,000 WattsOutput Stability+/- 2 PercentPulse ModeFrequency5 - 2,000 HzPower0-100 ...more
Nukon #ECOS-Line PRO3152K, 2000 watt, CNC control unit, hyd.blocks, sheet holder, new, #SMECOSLINEPRO3152K
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Nukon
Model: ECOS-LINE
EQUIPPED WITH. CNC Control UnitCutting HeadSuction SystemResonatorHydraulic BlocksSheet HolderSignal LampFilter For Exhaust GasesRack PinionQBH Cable Entry For Laser ...more
Nukon #NFPRO3153K, 3000 watt, CNC fiber laser cutting, hyd.blocks, dust filtration system, 32 HP, new, #SMNFPRO3153K
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Nukon
Model: NFPRO3153K
Capacity3000 WattsCutting CapacitiesMild Steel.709"Stainless Steel.394"Aluminum.315"Copper.197"Brass.197"Galvanized Steel.197"Laser Source IPG100,000 HoursMaximum Output3000 WattsOutput Stability+/- 2 PercentPulse ModeFrequency5 - 2,000 HzPower0-100 ...more
Nukon #NFPROVENTO315, 4000 watt, CNC fiber laser cutting, hyd.blocks, 42 HP, new, #SMNFPROVENTO315
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Nukon
Model: NFPROVENTO315
Capacity4000 WattsCutting CapacitiesMild Steel.787"Stainless Steel.472"Aluminum.393"Copper.236"Brass.236"Laser Source IPG100,000 HoursMaximum Output4,000 WattsOutput Stability+/- 2 PercentPulse ModeFrequency5 - 2,000 HzPower0-100 PercentLaser ...more
Nukon #NFPROVENTO420, 6000 watt, CNC fiber laser cutting, suction system, 80 HP, new, #SMNFPROVENTO420
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Nukon
Model: NFPROVENTO420
EQUIPPED WITH. Nozzle CleaningRadan CAD/CAM-SystemDust Separator SystemTraining For The CAD/CAM System (3 Days)Automatic Nozzle ChangerLinear DrivesPipe CuttingAutomation: Load/Unload ...more
Atrump #KL2180, 21" swing, 80" between centers, coolant, 10 HP, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: KL2180
Overall Capacity21" x 80" .Height of Center10.53"Swing Over Bed21"Swing Over Cross Slide12"Distance Between Centers80"Width of Bed Ways13.78"SPINDLESpindle Nose ...more
Atrump #KL30120, 30" swing, 20 HP, Centroid T400i Control, coolant, 331-1500 RPM, #SMKL30120, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: KL30120
Overall Capacity30" x 118".Swing Over Bed30"Center Height to Bed15"Center Height to Top Cross Slide9.5"Swing Over Cross Slide19.5"Distance Between ...more
Atrump #S25L, 19" swing, 25 collet chuck, 0.9" bar, Centroid T400I Control w/15" LCD, new, #SMS25L
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: S25L
Basic DimensionsMax. Turning Diameter0.984"Swing Over Saddle19.7".BedFlat BedGuide WayLinear on X and Z AxisSPINDLESpindle Nose Mounting25 Collect ChuckMax. Bar ...more
90 Ton, Cincinnati #90BX8, 10' overall, baseform hydraulic 3-Axis CNC, Touch Screen human machine interface, new, #SM90BX8
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 90BX8
Length of Bed & Ram120"Distance Between Housings96"Ram Stroke8"Throat16"Open Height15"Closed Height7"Ram Speed: Approach400 IPMRam Speed: Press10-24 IPMRam Speed: Return80-240 ...more
90 Ton, Cincinnati #90MX6, 6' overall, MaxForm CNC hydraulic, 7-Axis, 7" throat, 20 HP, new, #SM90MX6
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 90MX6
Dimensions (W x D x H)82 1/2" x 42 1/2" x 64"Tonnage90Length of Bed & Ram96"Distance Between Housing78"Ram ...more
90 Ton, Cincinnati #90PF+6, 8' overall, Proform CNC hydraulic, 15" Color LCD display w/Touchscreen interface, 15 HP, new, #SM90PF6
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 90PF+6
Voltage460V ~ 3 PhaseWeight15,000 Lbs.Dimensions (W x D x H)150" x 65" x 110"Horsepower15 H.P.CNC Axis3 AxisTypeCNC/ HydraulicCNC ...more
110 Ton, Comeq Primeline #S110B10, 10.1' overall, 122.1" between columns, 10.24" stroke, 15.75" throat, new, #SMS110B10
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Comeq
Model: S110B10
Overall Capacity110 Ton x 10'Operation TypeCNC ControlBending Length122.10"Distance Between Columns102.40"Stroke10.24"Open Height18.31"Throat15.75"Table Height35.45"Back Gauge Speed.X Axis Speed23.63 in/secX. Axis ...more
250 Ton, Comeq Primeline #S250B10, 10.1' overall, 102.4" between columns, 10.24" stroke, 15.75" throat, new, #SMS250B10
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Comeq
Model: S250B10
Overall Capacity250 Ton x 10'Operation TypeCNC ControlBending Length122.10"Distance Between Columns102.40"Stroke10.24"Open Height18.31"Throat15.75"Table Height36.63"Back Gauge Speed.X Axis Speed23.63 in/secX. Axis ...more
350 Ton, Comeq Primeline #S350C10, 10.1' overall, 102.4" between columns, 12.20" stroke, 19.68" throat, new, #SMS350C10
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Comeq
Model: S350C10
Overall Capacity350 Ton x 10'Operation TypeCNC ControlCrowningManualBending Length122.10"Distance Between Columns102.40"Stroke12.20"Open Height20.27"Throat19.68"Table Height38.20"Back Gauge Speed.X Axis Speed23.63 in/secX. Axis ...more
CNC Tool and Cutter Grinders
2 Results
Atrump #TD-2, 11" x5", BT40, 100-2500 RPM, PLC 2-Axis controller, 19" TFT monitor, 1 HP, new, #SMTD2
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Tool and Cutter Grinders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: TD-2
Capacity11" x 5".CBN Grinding WheelSpindle TaperBT40CBN Max. DiameterCBN Spindle Speed100 - 2500 rpmCBN Spindle Motor2 H.P. CBN Longitudinal ...more
Atrump, IPC w/650M 5-Axes controller with 15" LCD, oil coolant system, work light, new, #SMTR520
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Tool and Cutter Grinders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
EQUIPPED WITH. IPC with 650M 5 Axes Controller with 15" LCDC3 Precision Ball Screws Hardened & Ground for ...more
Acra MillPower #LCM-50 MillPWR 3AX, 3-Axis CNC, hard chrome ways, one shot lube system, new, #SMLCM50MILLPWR3AX
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: LCM-50
Table Size9" x 50"Longitudinal Travel36"Cross Travel12"Vertical Knee Travel16"Spindle Quill Travel5"Spindle NoseR-8Spindle Speeds60 - 4,500 RPMSpindle To Table2-1/8" - ...more
Die Cutting Press Machines
6 Results
8 Ton, APMC #APM-SA8, hydraulic clicker press, 15.7" x31.5" bed, quick height adjustment, dual joystick, stroke setting timer, #SMAPMSA8
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA8
Tonnage8 TonBed Size15.7" x 31.5"Beam Size12.6"Head TypeSwingHead Surface12.6"Day Light Opening4.7"Motor220 Volt, 1PH (3 Phase is available at no ...more
22 Ton, Apmc #APM-SA22, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA22
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA22
Tonnage22 TonsBed Size18" x 36"Head TypeSwingBeam Size14.6"Cutting Pad1"Maximum Stroke3.54"Maximum Open Daylight5"Horsepower1-1/2 H.P.Voltage220V ~ 3 PhaseDimensions (W x L ...more
27 Ton, Apmc #APM-SA27L, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA27L
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA27L
Tonnage27 TonBed Size20" x 40"Cutting Pad1"Beam Size24"Head TypeSwingMax. Stroke3.54"Max. Open Daylight5.1"Head Surface20"Ram Area24"Horsepower2Motor220 Volt, 3 PH (Single Phase ...more
39 Ton, APMC #USA-TH3079-35U, 5.9 stroke, 7.1" daylight, head press, polypropylene cutting pad, #SMTH307935U
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: USA-TH3079-35U
Weight5,400 Lbs.Cutting Head29.9" x 29.9"Stroke5.9"Head TypeTravelingBed Size29.9" x 78.7"Tonnage39Max. Daylight7.1"Dimensions (W x L x H)36" x 106" x ...more
40 Ton, APMC #USA-FH3163-40M, 7.1 stroke, 9.1" daylight, hydraulic clicker press, #SMFH316340M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: USA-FH3163-40M
Tonnage40Bed Size (W x L)31.5" x 63"Head Type4 PostCutting Area29.5" x 61"Stroke7.1"Max. Daylight9.1"Motor220 Volt, 3 PHHorsepower5Dimensions (W x ...more
80 Ton, Apmc #USA-FH3563-80M, 7.1 stroke, hydraulic, clicker press, 4-post, single manual slide table, New, #SMFH356380M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: USA-FH3563-80M
14"/20" x 40" Acra #1440SVS, precision AC vari-engine lathe, 6" 3-Jaw, 8" 4-Jaw, 30-2500 RPM, 5 HP, new, #SM1440SVS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1440SVS
Capacity14"/20"x40"Swing Over Bed14"Swing Over Cross Slide8 5/8"Swing in Gap20"Distance Between Centers40"Bed Width8 1/2"Spindle NoseD1-4Spindle Bore1 1/2"Taper of SpindleMT ...more
17"/24" x 40" Acra #1740TE, precision engine, 8-speed, 8" 3-Jaw, 10" 4-Jaw, 70-1800 RPM, Steady Rest, 5 HP, new, #SM1740TE
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1740TE
17"/24" x 43" Acra #1743GFEL, 10" 3-Jaw chuck, 12" 4-Jaw chuck, 35-2000 RPM, Steady Rest, 4-way tool post, 7.5 HP, new, #SM1743GFEL
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1743GFEL
Capacity17" / 24" x 43"Swing Over Bed17"Swing Over Cross Slide10 3/4"Swing in Gap24"Distance Between Centers43"Bed Width12"Spindle NoseD1-6Spindle Bore2 ...more
18"/28" x 60" Acra #1860C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1860C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1860C
Capacity18" / 28" x 60"Swing Over Bed18"Swing Over Cross Slide11"Swing in Gap28"Distance Between Centers60"Bed Width13 9/16"Spindle NoseD1-8Spindle Bore3 ...more
18"/28" x 80" Acra #1880C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1880C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1880C
Capacity18" / 28" x 80"Swing Over Bed18"Swing Over Cross Slide11"Swing in Gap28"Distance Between Centers80"Bed Width13 9/16"Spindle NoseD1-8Spindle Bore3 ...more
21"/31" x 120" Acra #21120C, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM21120C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 21120C
Capacity21" / 31" x 120"Swing Over Bed21"Swing Over Cross Slide14"Swing in Gap31"Distance Between Centers120"Bed Width13 9/16"Spindle NoseD1-8Spindle Bore3 ...more
26"/35-3/8" x 90" Acra #2690ACH, precision engine, 3-Jaw 15" chuck, 4-way tool post, 13-1200 RPM, 15 HP, new, #SM2690ACH
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 2690ACH
Capacity26" / 35 3/8" x 90"Swing Over Bed26"Swing Over Cross Slide17 3/8"Swing in Gap35 3/8"Distance Between Centers90"Bed Width15 ...more
32" x 120" Acra #SET32120, high speed heavy duty engine lathe, 20" 3-Jaw chuck, coolant system, new, #SMSET32120
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: SET32120
Swing Over Bed32"Swing Over Cross Slide23"Swing in Gap44"Hole Thru Spindle6"Spindle NoseA2-11Spindle Speeds15 - 1000 RPMHorsepower25 H.P.Voltage220/440V AC~ 3 ...more
Horizontal Band Saws
23 Results
9" x 17" W.F. Wells #W-9-1, vari-hydraulic, 70-380 SFPM, horizontal bandsaw, 3 HP, Coolant, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: W.F. Wells
Model: W-9-1
Capacity9" x 17"Operation TypeSemi-Automatic45 Degrees45 Degree Round8"45 Degree Rectangle8" x 9"90 Degrees90 Degree Round9"90 Degree Rectangle9" x 17"Weight ...more
10" x 16" DoAll #400S, miter cutting heavy duty metal, spring loaded blade tension handwheel, new, #SM400S
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 400S
Overall Capacity9" x 16"Operation TypeManual.90 Degree Rectangle16" x 9"90 Degree Round10-3/4"45 Degree Rectangle10-3/4" x 9"45 Degree Round10-3/4"Blade Size ...more
10" x 18" Acra #RF-1018S, step pulley speed control, laser guide, coolant system, 2 HP, new, #SMRF1018S
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: RF-1018S
Operation:ManualCapacity:.Rectangle (90 Degrees)10' x 18'Rectangle (45 degrees)10' x 9 1/2'Round (90 Degrees)10'Round (45 Degrees)8 1/2'Blade Speed (Variable)62 - ...more
11" x 11-3/4" DoAll #DC-280NC, fully automatic, PLC control for all-electric, 5 HP, new, #SMDC280NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-280NC
Overall Capacity11" x 11"Operation TypeFully Automatic.Round11"Rectangle11-3/4" x 11"Bundle Capacity Max.9-3/4" x 4"Bundle Capacity Min.6-1/2" x 5/8"Blade Speed72 - ...more
13" x 15" DoAll #DC-330NC, fully automatic, PLC control for all electric, 5 HP, new, #SMDC330NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-330NC
Overall Capacity13" x 15"Operation TypeAutomaticCapacity.Round13"Rectangle13" x 15-3/4"Bundle Capacity Max.14-1/2" x 6-5/8"Bundle Capacity Min.6-1/2" x 2"Blade Speed72 - 390 ...more
13" x 15" DoAll #DC-330SA, semi-auto high production, hyd.blade tensions, 66-262 FPM, 5 HP, new, #SMDC330SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-330SA
Overall Capacity13" x 15"Operation TypeSemi-AutomaticCapacity.Round13"Rectangle13" x 15-3/4"Blade Speed66 - 262 fpmBlade Size1-1/4" x 0.042" x 167"Material Pass Line ...more
13" x 18" Hyd-Mech #S20P, pivot style, cast-iron head, easy swing, 36" material in-feed roller, semi-auto control, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Hyd-Mech
Model: S20P
Capacity13" x 18"30 Degrees Rectangle7-3/4" x 13"45 Degree Round12"45 Degrees45 Degree Rectangle10-3/4" x 13"30 Degrees Round 8-1/2"30 DegreesOperation ...more
14" x 20" DoAll #500SNC, swivel head heavy duty miter cutting, auto.feed, 5 HP, new, #SM500SNC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 500SNC
Overall Capacity20" x 14"Operation TypeManual.90 Degree Rectangle20" x 14"90 Degree Round14-3/4"45 Degree Rectangle13" x 14"45 Degree Round13"60 Degree ...more
16" x 16" DoAll #DC420NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC420NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC420NC
Overall Capacity16" x 16"OperationAutomaticCapacity.Round16-1/2"Rectangle16-1/2" x 16-1/2"Bundle Capacity Max.14-1/2" x 7-5/8"Bundle Capacity Min.6-1/2" x 3-1/4"Blade Speed72 - 390 SFPMBlade ...more
16" x 20" W.F. Wells #F16-1, 60-425 SFPM, variable hydraulic, 7.5 HP, 3-Phase, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: W.F. Wells
Model: F-16-1
Capacity16" x 20"Operation TypeSemi-Automatic45 Degrees45 Degree Round9"45 Degree Rectangle9" x 16"90 Degrees90 Degree Round16"90 Degree Rectangle16" x 20"Blade ...more
18" x 20" DoAll #DC-460NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC460NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-460NC
Operation TypeAutomaticCapacity.Round20"Rectangle18" x 20"Bundle Capacity Max.18.88" x 9.75"Bundle Capacity Min.9.38" x 3.25"Blade Speed72 - 390 SFPMBlade Size1-1/2" x ...more
19" x 22" DoAll #DC-500SA, semi-auto high production, hyd.blade tension, 66-262 FPM, 7.5 HP, new, #SMDC500SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-500SA
Overall Capacity19" x 22"Operation TypeSemi-AutomaticCapacity.Round19.7"Rectangle22" x 19.7"Blade Speed66 - 262 fpmBlade Size1-1/2" x 0.05" x 215"Material Pass Line ...more
20" x 24" Wellsaw #H-2024-1, 60-500 SFPM, 7.5 HP, 3 Phase, 115 V., semi-automatic, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Wellsaw
Model: H-2024-1
Capacity20" x 24"Operation TypeSemi-Automatic90 Degrees90 Degree Round20"90 Degree Rectangle20" x 24"Blade Speed60 - 500 SFPMVoltage115VBlade Guide Rollers & ...more
22" x 24" DoAll #DC-560NC, fully automatic, PLC control for all electric, 10 HP, new, #SMDC560NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-560NC
Overall Capacity22" x 24"Operation TypeAutomaticCapacity.Round22"Rectangle22" x 24"Bundle Capacity Max.19-7/8" x 8-7/8"Bundle Capacity Min.9-7/8" x 5-3/4"Blade Speed72 - 390 ...more
22" x 31" DoAll #DC-560SA, semi-auto high production, hyd.blade tension, set of 6' roller stands, 10 HP, new, #SMDC560SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-560SA
Overall Capacity22" x 31"Operation TypeSemi-AutomaticCapacity.Round22"Rectangle22" x 31-1/2"Blade Speed52 - 279 fpmBlade Size2" x 0.063" x 268"Material Pass Line ...more
22" x 48" Wells #M-36-3, semi-automatic hyd.swivel base, miter, 60-500 SFPM, 15 HP, new, #SMM363
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Wells
Model: M-36-3
24" x 20" W.F. Wells #H-2024HA-CNC, fully automatic w/shuttle type barfeed horiz.twin post, 10 HP, new, #SMH2024HACNC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: W.F. Wells
Model: H-2024HA-CNC
Capacity24" x 20" Operation TypeAutomatic.90 Degrees90 Degree Round20"90 Degree Rectangle24" x 20" Weight Capacity6500 lbsBlade Speed60 - 500 ...more
27" x 31" DoAll #DC-700NC, fully automatic, PLC control for all electric & hyd.functions, 15 HP, new, #SMDC700NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-700NC
Overall Capacity27" x 31"Operation TypeAutomaticCapacity.Round27"Rectangle27" x 31"Bundle Capacity Min.13-3/8" x 7-5/8"Blade Speed72 - 390 SFPMBlade Size2-5/8" x 0.063" ...more
31" x 39" DoAll #DC-800NC, Continental Series, fully automatic high production, 52-275 FPM, 15 HP, new, #SMDC800NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-800NC
Overall Capacity31" x 39" Operation TypeAutomaticCapacity.Round7.8" - 31.4"Rectangle31.4" x 39.3"Bundle Capacity Max.25-5/8" x 14-5/8"Bundle Capacity Min.14-1/8" x 10-1/4"Blade ...more
31" x 39" DoAll #DC-800SA, Continental Series, semi-automatic high production, 15 HP, new, #SMDC800SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-800SA
Overall Capacity31" x 39" Operation TypeSemi-Automatic.Round31.5"Rectangle31.4" x 39.3"Blade Speed85 - 279 fpmBlade Size2-5/8" x 0.063" x 344"Material Pass ...more
37" x 40" Wellsaw #S-40-3C, semi-automatic hydraulic, vari-speed, coolant, New, #SMS403C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Wellsaw
Model: S-40-3C
Capacity37" x 40"Operation TypeSemi-Automatic45 Degrees45 Degree Rectangle24" x 37"90 Degrees90 Degree Rectangle37" x 40" Weight Capacity15,000 lbsBlade Speed60 ...more
43" x 43" DoAll #DC-1100SA, semi-auto high production, variable vise pressure, 49-262 FPM, 15 HP, new, #SMDC1100SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-1100SA
51" x 67" DoAll #DC-1700SA, Continental Series dual column semi-automatic high production, 20 HP, new, #SMDC1700SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-1700SA
EQUIPPED WITH. PLC Control for All Electric and Hydraulic FunctionsVariable Vise PressureHydraulic Blade TensionBlade Deviation MonitorHydraulic Full Stroke ...more
Atrump #LH-117-Centroid, 24 automatic tool changer, 43.3" X, 35" Y, 27" Z, 4500 RPM, 3-Axis, 25 HP, 27.6" x49.6" table, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LH-117-CENTROID
Table Size27.6" x 49.6"Load Capacity1,320 Lbs.Longitudinal Travel43.3"Cross Travel35.4"Vertical Head Travel27.6"Spindle Nose To Table Top4.6" - 32.3"Spindle Nose to ...more
Initial and Double Pinch Plate Bending Rolls
5 Results
4' x 1/16" National #NR4816, forward & reverse drum switch, front gear, foot switch, stand, 7.5 HP, new, #SMNR4816
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NR4816
Capacity16 Ga.Max. Forming Length48-1/4"Diameter Of Roll3"Min. Forming Radius1-1/2"Wire Grooves (Optional)3/8", 1/2", 5/8"Roll Speed18 RPMType:Initial PinchOperation:HydraulicHorsepower1 H.P.Motor110 - 200 ...more
4' x 1/4" GMC #HBR-0425, 5-7/8" roll diameter, 3 HP, tool box, forward/reverse, #SMHBR0425
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Gmc
Model: HBR-0425
Overall Capacity1/4" x 4'Roll Capacity.Mild Steel1/4" X 4'Stainless Steel3/16" x 4'Minimum Roll Diameter8-1/4"Roll Length51"Roll Diameter5-7/8"Pre-Bend0.16"Roll Speed7 rpmRoll Opening1-5/8"Oil ...more
6' x 1/16" National #NR7216, hydraulic, forward & reverse drum switch, front gear, 1 HP, new, #SMNR7216
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NR7216
Capacity16 Ga.Max. Forming Length72-1/4"Diameter Of Roll4"Type:PyramidOperation:HydraulicMin. Forming Radius2"Wire Grooves (Optional)3/8", 1/2", 5/8"Roll Speed18 RPMHorsepower1 H.P.Motor110 - 200 1 ...more
10' x 1/4" Birmingham #RH-1006, heavy duty hydraulic bending roll double pinch, LED position indicator, new, #SMRH1006
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: RH-1006
Capacity (Mid Steel)1/4" x 120"Roll Diameter10"Roll Speed177 IPMOperation:HydraulicType:Double PinchHorsepower7.5 H.P.Dimensions (L x W x H)177" x 43" x ...more
10' x 1/2" Quantum #G3014-C, double pinch hydraulic 3-Roll, plate bender, digital display, permanent lube system, new, #SMG3014C
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quantum
Model: G3014-C
Max Rolling Thickness1/2"Maximum Pre-Bend Thickness.39"Maximum Working Length120"Top Roll11"Side Roll Diameter10.25"Operation:HydraulicHardening (Induction)50 58 HRCRollsC45 Alloy SteelType:3 Roll Double PinchHorsepower10 ...more
3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 6-6/8" throat, 1.5" stroke, 4.5 HP, foot pedal, New, #SMMICROCROP36
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: MICROCROP-36
Tonnage40Throat Depth6-5/8"Length Of Blade14"Stroke Length Punch1-1/2"CapacityPunch1-1/16" thru 1/2"Angles Square3" x 3" x 5/16"Angles @ 45 Degrees (Leg -In)2" ...more
3" x 3" x 3/8" Piranha #P-50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Piranha
Model: P-50
Punch Capacity50 TonHole Size (Max. Material)13/16" (3/4")Max. Hole Size (Material)3" (3/16")Throat Depth5"Open Height11-1/2"Closed Height w/o Die Block7-3/4"Stroke Length3-3/4"Platen ...more
3" x 3" x 3/8" Scotchman #DO-135/220-24M, ironworker, 135 ton, dual operation, 12" throat, made in the USA, new, #SMDO13522024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-135/220-24M
Rated On:65,000 PSI TensilePunching CapacitySpecial Tooling4" Max. Dia.Throat Depth12"Flat Bar Shear (Sabre Blade-Std.)220 Ton, 24" LengthAngle Shear 90Angle ...more
4" x 4" x 3/8" Scotchman #5014-ET, 50 ton, 3-station revolving turret, 2" die holders, new, #SM5014ET
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: 5014-ET
Capacity50 TonPunch Capacity:Punch1-1/4" in 1/2" MaterialPunch13/16" in 3/4" MaterialThroat Depth4"Flat Bar Shear14" LengthAngle Shear 90 Degrees4" x 4" ...more
5" x 5" x 3/8" Geka #Bendicrop-60s, 60 ton, 10" throat, 3/4" stroke, 7.5 HP, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: BENDICROP-60S
Tonnage60 TonFlat Bar Shear.Flat Bar (low deformation)14" x 3/8" .5 Degree - 14" x 1/2" Length Of Blade14"Shear ...more
5" x 5" x 3/8" Geka #Bendicrop-85S, 90 ton, 12" throat, 1" stroke, 13.5 HP, 5 stations, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: BENDICROP-85S
Tonnage90 TonFlat Bar Shear.Flat Bar (low deformation)18" x 5/8".5 Degrees - 18" x 3/4"Length Of Blade19"Working Height36-7/32"Shears for ...more
5" x 5" x 3/8" Piranha #P65, hydraulic, 65 ton, automatic hold down, punch holder, 7.5 HP, new, #SMP65
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Piranha
Model: P65
Punch Capacity65 TonHole Size (Max. Material)1-1/16" (3/4")Max. Hole Size (Material)5" (1/8")Throat Depth8"Open Height13-1/2"Closed Height w/o Die Block9-1/4"Stroke Length4-1/4"Platen ...more
5-1/8" x 5-1/8" x 1/2" Geka #Hydracrop-80SD, 88 ton, hydraulic, 5 stations, foot pedals, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: HYDRACROP-80SD
Tonnage88 TonShearing Power150 TonShears.Flat Bar (with slight deformation)18" x 5/8" or 12" x 3/4"Length Of Blade18-11/16"Work Height33-1/2"C-Shears.L at ...more
6" x 6" x 3/8" Scotchman #6509-24M, 65 ton, 3/4" str, hydraulic ironworker, 24" length, die holder, shear table, new, #SM650924M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: 6509-24M
Punching Capacity65 TonTypeHydraulicThroat Depth9"Capacity.Flat Bar Shear24" LengthAngle Shear.90 Degrees6" x 6" x 3/8"45 Degrees3" x 3" x 3/8"45 ...more
6" x 6" x 1/2" Scotchman #912-24M, ironworker, 90 ton, angle shear, punch station, 3 yr manufacturers warranty, new, #SM901224M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: -912-24M
Punching Capacity90 TonPunch Capacity1-1/8" in 1"Special Tooling4" Max. Dia.Throat Depth12"Flat Bar Shear24" LengthOpt. Sabre Blade1/2" x 22"Angle Shear ...more
6" x 6" x 1/2" Scotchman #12012-24M, 120 ton hydraulic ironworker, 12" throat, rod shear, warranty, new, #SM1201224M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: 12012-24M
Punching Capacity120 TonSpecial Tooling4" Max. Dia.Throat Depth12"Flat Bar Shear24"(Sabre Blade - Std.)1" x 12"Horsepower1.5 HP (1ph), 3HP (3ph)Angle ...more
6" x 6" x 1/2" Scotchman #DO-70/110-24M, dual operator ironworker, 70 ton, 9" throat, made in the USA, new, #SMDO7011024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-70/110-24M
Punch Capacity70 Ton, 1-1/8" in 3/4"Special Tooling4" Max. Dia.Throat Depth9"Flat Bar Shear (Sabre Blade-Std.)110 Ton, 24" LengthAngle Shear ...more
6" x 6" x 1/2" Scotchman #DO-95/140-24M, dual operator ironworker, 95 ton, 9" throat, made in the USA, new, #SMDO9514024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-95/140-24M
Punch Capacity95 Ton, 1-3/16" in 1"Special Tooling4" Max. Dia.Throat Depth9"Flat Bar Shear (Sabre Blade-Std.)140 Ton, 24" LengthAngle Shear ...more
6" x 6" x 1/2" Scotchman #DO-120/200-24M, dual operation hydraulic ironworker, 120 ton, 12" throat, USA, new, #SMDO12020024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-120/200-24M
Punching Capacity120 TonSpecial Tooling4" Max. Dia.Throat Depth12"Flat Bar Shear24"Angle Shear 90 Degrees6" x 6" x 1/2"Angle Shear 45 ...more
6" x 6" x 1/2" Scotchman #DO-150/240-24M, dual operation hydraulic ironworker, 150 ton, 12" throat, new, #SMDO15024024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-150/240-24M
Punching Capacity150 TonI1 - 1/2" In 1 - 1/4"Special Tooling4" Max. Dia.Throat Depth12"Flat Bar Shear24"(Sabre Blade - Std.)1" ...more
6" x 6" x 1/2" Scotchman #DO-8514-20M, dual operation hydraulic ironworker, 85 ton, 14" throat, warranty, new, #SMDO851420M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-8514-20M
Punching Capacity85 TonsSpecial Tooling4" Max. Dia.Throat Depth14"Flat Bar Shear20"(45 Degree With Bar Sheer)4" x 4" x 1/2"Brake 12"85 ...more
6" x 6" x 1/2" Scotchman #FI-8510-20M, 85 ton ironworker, adjustable electric stroke Control w/scale, warranty, new, #SMFI851020M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: FI-8510-20M
EQUIPPED WITH. Keyed Punch Ram For SafetyDie Holder Complete With 2" Die InsertPunch Nut With WrenchAdjustable Swing - ...more
8" x 8" x 3/4" Geka #Hydracrop-165SD, 185 ton, 24" throat, 4" stroke, 20 HP, foot pedals, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: HYDRACROP-165SD
Tonnage185 TonShearing Power300 TonShears.Flat Bar (with slight deformation)30" x 3/4" or 16" x 1-1/8"Length Of Blade30-1/8"Working Height34-1/4"C-Shears.L at ...more
Geka #Puma-110SD, 120 ton, 29.5" throat, 0.75" stroke, 20 HP, New, #SMPUMA110SD
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: PUMA-110SD
Punching Power120 TonMaximum Capacity1-1/2" x 3/4"Throat29-1/2"Punching of Sections with Gooseneck Die Holder.I on the Leg4" - 17-3/4"I on ...more
Power Squaring Shears (Gauge)
6 Results
16 gauge x 4' National #NH5216, cast iron side frames, steel cutter heads & tables, front supports, 3 HP, new, #SMNH5216
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH5216
Capacity Mild Steel16 Ga.Capacity Stainless Steel20 Ga.Type:HydraulicMax. Cutting Length52"Back GaugeRear Operated Manual BackgaugeStrokes Per Minute25Oil Capacity24 Gal.Horsepower3 H.P.Dimensions ...more
14 gauge x 8.4' Birmingham #H10014, deluxe hydraulic, (2)14" side gauges, 24" BG, 22 SPM, 5 HP, new, #SMH10014
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: H10014
CapacityMild Steel14 Ga.Stainless Steel18 Ga.Type:HydraulicStokes Per Minute22Motor5 HPBack GaugeRear Operated Manual BackgaugeBack Gauge Length24"Front Gauge Length24"Dimensions (L x ...more
12 gauge x 3' National #NH3612, cast iron side frames, steel cutter heads & tables, foot switch, 3 HP, new, #SMNH3612
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH3612
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Type:HydraulicMax. Cutting Length36"Back GaugeRear Operated Manual BackgaugeStrokes Per Minute40Oil Capacity14 Gal.Horsepower3 H.P.Motor3 ...more
12 gauge x 4' National #NH5212, hydraulic, double acting cylinders, rear operated manual back gauge, 3 HP, new, #SMNH5212
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH5212
Capacity Mild Steel12 Ga.Capacity Stainless Steel16 Ga.Type:HydraulicMax. Cutting Length52"Back GaugeRear Operated Manual BackgaugeStrokes Per Minute25Motor3 Ph 460 Volt ...more
10 gauge x 4' National #NH5210, hydraulic, pilot operated pressure relief valve, 25 SPM, 5 HP, new, #SMNH5210
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH5210
Capacity Mild Steel10 Ga.Capacity Stainless Steel14 Ga.Type:HydraulicBack GaugeNoMax. Cutting Length52"Strokes Per Minute25Oil Capacity24 Gal.Motor3 Ph 460 Volt 1800 ...more
10 gauge x 10' Birmingham #H-1035, hydraulic rake angle adjustment, front supports, rear operated manual back gauge, 10 HP, new, #SMH1035
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: H-1035
Cutting Capacity: (Mild Steel)10 Ga.Stainless13 Ga.Type:HydraulicStrokes Per Minute25 - 35 SPMNumber of Hold Downs16Back GaugeRear Operated Manual BackgaugeBack ...more
Power Squaring Shears (Inch)
8 Results
1/4" x 4' National #NH4825, hyd.rubber inserted holddowns, steel cutter heads & tables, 7.5 HP, new, #SMNH4825
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH4825
Capacity1/4" x 4'Mild Steel1/4"Stainless1/8"TypeHydraulicMaximum Cutting Length48"Strokes Per Minute20Back GaugeRear Operated Manual Adjusting Backgauge with Positive LockOil Capacity24 GallonsHorsepower7-1/2 ...more
1/4" x 6' National #NH7225, hyd.rubber inserted holddowns, steel cutter heads & tables, 7.5 HP, new, #SMNH7225
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH7225
Max. Cutting Length72"TypeHydraulicCapacity Stainless Steel1/8"Capacity Mild Steel1/4"Back GaugeRear Operated Manual Back Gauge with Quick Adjusting Hand Wheel and ...more
1/4" x 8' National #NH9625, hyd.rubber inserted holddowns, steel cutter heads & tables, 7.5 HP, new, #SMNH9625
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH9625
Capacity Mild Steel1/4"Capacity Stainless Steel1/8"TypeHydraulicMax. Cutting Length96"Back GaugeRear Operated Manual Adjusting Backgauge with Positive LockStrokes Per Minute12Oil Capacity24 ...more
1/4" x 10' Accurl #MS8, 17 holddowns, 40" servo driven Back Gauge, 4-sided blades, 2020, #CD5219
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Accurl
Model: MS8
Year: 2020
Throat Depth130 mmDimensions (L x W x H)166" X 88" X 84"Working table height860mmCutting Capacity6mm Carbon Steel & ...more
1/4" x 10' Cincinnati #1810G, heavy duty mechanical, front operated power back gauge w/indicator, 60 SPM, 7.5 HP, new, #SM1810G
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 1810G
Capacity (mild steel)1/4"Horsepower1 H.P.TypeMechanicalThroat4"Rake Angle1/4"Strokes Per Minute60Back GaugeFront Operated Power Backgauge With IndicatorBack Gauge Range36"Number Of Hold Downs ...more
1/4" x 10' National #NH12025, hyd.rubber inserted holddowns, steel cutter heads & tables, 7.5 HP, new, #SMNH12025
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH12025
Capacity Mild Steel1/4"Capacity Stainless Steel1/8"TypeHydraulicMax. Cutting Length120"Strokes Per Minute12Back GaugeRear Operated Manual Adjusting Backgauge with Positive LockOil Capacity24 ...more
1/4" x 12' Cincinnati #250HS12, heavy duty hydraulic, front operated power back gauge w/indicator, automatic lubrication, 65 SPM, 25 HP, new, #SM250HS12
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: -250HS12
Capacity (mild steel)1/4"TypeHydraulicBlade Size1" x 3" x 150"Ram Speed: Down178 IPMRam Speed: Up308 IPMRake Angle3/8"Strokes Per Minute65Back GaugeFront ...more
1/2" x 12' Cincinnati #500HS12, heavy duty hydraulic, front operated power back gauge w/indicator, automatic lubrication, 17-50 SPM, 40 HP, new, #SM500HS12
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 500HS12
Vertical Arm Movement27 1/4"Column To Spindle9 1/2" - 50"TypeHydraulicBlade Size1" x 4" x 148"Ram Speed: Down259"/MinRam Speed: Up450"/MinRake ...more
Precision and Second Operation Lathes
5 Results
Acra #27AFL, 9" x10", second operation toolmakers lathe, Lever 5C Collet closer, 4000 RPM, 1 HP, new, #SM27AFL
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: -27AFL
Spindle Capacity w/ Chuck5"Spindle w/ Expanding Collets3"Spindle w/ Round 5C Collets1-1/16"Spindle w/ Hexagon 5C Collets7/8"Spindle w/ Square 5C ...more
Acra #68EVS, 13" x14", 4000 RPM, 5C Lever Collet closer, 8-positions tool turret, new, #SM68EVS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: -68EVS
Spindle Capacity With Chuck6"Capacity w/ Expanding Collets3"Capacity w/ Round 5C Collets1-1/16"Capacity w/ Hexagon 5C Collets7/8"Capacity w/ Square 5C ...more
Acra #SET3280, 32"/44" x80" precision engine lathe, 20" 3-Jaw chuck, 4-way tool post, #5MT, 25 HP, new, #SMSET3280
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: SET3280
Capacity32"/44" x 80"Swing Over Bed32"Swing Over Cross Slide23"Swing in Gap44"Distance Between Centers80"Bed Width18"Spindle NoseA2-11Spindle Bore6"Taper of SpindleMT #5Spindle ...more
Atrump #LD-1660, 16"/21" x 60" cap., precision, hardened & ground ways, 4-way tool post, 8.5 HP, new, #SMLD1660
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LD-1660
Capacity16"/21" x 60"Swing Over Bed16"Swing Over Gap21-3/4"Swing Over Cross Slide9-1/2"Distance Between Centers60".BedWidth of Bed Ways10"Top Slide Travel4"Cross Slide ...more
Birmingham #HTL64120/W6, 64" x120" heavy duty precision, 39" 4-Jaw chuck, dead center, 30 HP, new, #SMHTL64120W6
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: HTL64120/W6
Capacity64" x 120"Swing Over Bed32"Swing Over Cross Slide49"Distance Between Centers120"Max. Weight of Work Piece13,200 Lbs.Width of Bed29-3/4"Swing Over ...more
3/16" x 12' Betenbender #12-1875, hyd.low profile, 4' squaring arm, 2500 psi hyd.pressure, 10 HP, new, #SM121875
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Press Brakes, Inches
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 12-1875
Capacity3/16" x 12'Blade1" x 3"Blade Length148"Squaring Arm4'Rake Angle1/4"/ftTable Height32"Strokes Per Minute26Number of Hold Down Pins21Power Backgauge36"End Plate Width30"Anchor ...more
1/4" x 10' Betenbender #10-250, hyd.self-compensating holddown bar assembly, 36" PBG, 15 HP, new, #SM10250
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Press Brakes, Inches
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 10-250
Capacity1/4" x 10'Blade1" x 4"Blade Length124"Squaring Arm4'Rake Angle1/4"/ftTable Height32"Strokes Per Minute15Number of Hold Down Pins19 Power Backgauge36"End Plate ...more
3' -8" Acra #FRD900, coolant system, box table, tool box, #4MT, 88-1500 RPM, 2 HP, new, #SMFRD900
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Radial Drills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: FRD900
Column Diameter8"Arm Length36'Drilling Capacity In Steel1-1/2"Drilling Capacity In Cast Iron2"Tapping Capacity In Steel3/4"Tapping Capacity In Cast Iron1"Spindle Taper#4 ...more
3' -11" Acra #FRD1100, radial arm drill, box table, tool box, coolant system, #4MT, 44-1500 RPM, 3 HP, new, #SMFRD1100
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Radial Drills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: FRD1100
Column Diameter11"Arm Length45"Drilling Capacity In Steel2"Drilling Capacity In Cast Iron2-3/8"Tapping Capacity In Steel1"Tapping Capacity In Cast Iron1.25"Spindle Taper#4 ...more
4' -11" Acra #FD1280, radial drill arm, box table, tool box, coolant system, #4MT, 44-1500 RPM, 3 HP, new, #SMFRD1280
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Radial Drills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: FD1280
Column Diameter11"Arm Length55-1/2"Drilling Capacity In Steel2"Drilling Capacity In Cast Iron2-1/8"Tapping Capacity In Steel1"Tapping Capacity In Cast Iron1.25"Spindle Taper#4 ...more
5' -17" Acra #ARD2000, radial arm drill, 24" x 31" box table, tool box, #5MT, coolant system, 7.4 HP, new, #SMARD2000
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Radial Drills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: ARD2000
Column Diameter17"Distance Column to Spindle17.71" - 78.74"Distance Spindle to Base15.75" - 63"Vertical Travel Of Arm31.50"Distance of Head Travel61"Drilling ...more
Ram (Die Sinker) EDM
1 Result
Acra #EDM1216, 28" x18" work table, 16" long., 12" cross, coolant system, 60 amp, new, #SMEDM1216
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ram (Die Sinker) EDM
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: EDM1216
Work Tank Capacity44" x 24" x 16"Work Table Dimensions28" x 18"Longitudinal Travel16"Cross Travel12"Spindle Travel8"Headstock Travel10"Amps60Input Rating7 KVAMaximum Processing ...more
Reciprocating Surface Grinders - Horizontal Spindle
5 Results
6" x 18" Chevalier #FSG-2A618, fully automatic precision hydraulic, 2-Axis, 16-82 FPM, 3.3 HP, new, #SMFSG2A618
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-2A618
Table Size6" x 18"Max. Grinding Length18"Max. Grinding Width6"Max. Distance From Table Surface to Spindle Centerline18"Longitudinal Movement of Table.Hydraulic19-3/4"Manual20"Table ...more
6" x 18" Chevalier #FSG-618M, manual, Halogen light, 18-62 FPM, 3450 RPM, new, #SMFSG618M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-618M
Table Size6" x 18"Max. Grinding Length18"Max. Grinding Width6"Max. Distance From Table Surface to Spindle Centerline18"Longitudinal Movement of Table19"Cross ...more
8" x 18" Chevalier #FSG-3A818, fully automatic precision hydraulic, 3-Axis, 16-82 FPM, 5 HP, new, #SMFSG3A818
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-3A818
Table Size8" x 18"Max. Grinding Length18"Max. Grinding Width8"Max. Distance From Table Surface to Spindle Centerline18"Longitudinal Movement of Table.Hydraulic19-3/4"Manual21"Table ...more
12" x 24" Acra #1224HS, fully automatic, grinding wheel, 3-Axis, 1750 RPM, 5 HP, new, #SM1224HS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1224HS
Table Work Surface12" X 24"Grinding Wheel14" X 1 1/2" X 5"Center Height25"Wheel RPM1750Horsepower5 H.P.Voltage220/440V AC/3PHOperation3 Axis AutomaticWeight4850 LbsDimensions ...more
12" x 24" Chevalier #FSG-3A1224, 3-Axis fully automatic feed, hydraulic, 10 HP, new, #SMFSG3A1224
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-3A1224
Table Size12" x 24"Max. Grinding Length24"Max. Grinding Width12"Max. Distance From Table Surface to Spindle Centerline24-3/4"Longitudinal Movement of TableHydraulic25-5/8"Manual27-1/2"Table ...more
Reciprocating Type Air Compressors
2 Results
17 cfm, 14 psi, Quincy #QT5-580H, reciprocating vertical air compressor, 5 HP, 2 stage, fan cooler, #SMQT5580H
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Reciprocating Type Air Compressors
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quincy
Model: QT5-580H
Weight700 Lbs.Barometric Pressure14.4 PSIDimensions (W x D x H)40" x 29" x 75"Barometric Pressure6.9Voltage230/460V ~ 3 PhaseHorsepower5 H.P.TypeVerticalRPM942MDMT-20F ...more
38 cfm, 175 psi, Quincy #QT10-120H, Simplex reciprocating vertical air compressor, 10 HP, inlet air filter, #SMQT10120H
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Reciprocating Type Air Compressors
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quincy
Model: QT10-120H
Capacity120 GallonCFM:38Number of Cycles2RPM968Max P.S.I175Horsepower10 H.P.Voltage230/460V ~ 3 PhaseDimensions (W x D x H)52" x 40" x 83"Weight1,000 ...more
Rotary Screw Air Compressors (Positive Displacement)
3 Results
73 cfm, 125 psi, Quincy #QGD-15, rotary air compressor, 15 HP, Airlogic 2 controller, #SMQGD15
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quincy
Model: QGD-15
CFM:73Max. P.S.I.125Compressed Air Outlet Size1" MNPTCondensate Drain Outlet Size5/16 Push-inSound Level66 dB(A)Horsepower15 H.P.VoltageVarious Available upon RequestDimensions (W x ...more
73 cfm, 175 psi, Quincy Jet #JCP-801, 80 gallon, 5 HP, 2-stage, cast iron pump, #SMJCP801
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quincy
Model: JCP-801
Tank Size (Gal.)80 GallonTank ConfigurationVerticalASME CertifiedYesMaximum Pressure (PSI)175 PSITank MAWP200 PSIDisplacement CFM17.3Air Delivery (CFM)14 CFM @ 90 PSIAir ...more
320 cfm, 125 psi, Quincy #QGS-75, rotary screw air compressor, 75 HP, air cooled, Air Logic controller, #SMQGS75
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Quincy
Model: QGS-75
CFM:320Max. P.S.I.125Maximum Full Flow Operating Pressure132CoolingAir CooledSound Level71 db (A)ControlsLoad/No Load Controls With Timed ShutdownHorsepower75 H.P.Voltage460V ~ 3 ...more
Sheet Metal Box and Pan Brakes
2 Results
14 gauge x 10' Birmingham #V0-1014-6, box & pan manual brake, stand, counterweights, 2"-3"-4" finger width, new, #SMV10146
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sheet Metal Box and Pan Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: V0-1014-6
Bending Length120"Capacity (Mild Steel)14 GACapacity (Stainless Steel)18 GABeam Adjustment1"Bending Angle0-135 DegreesFinger Widths2", 3", 4"Dimensions146" x 34" x 44"Weight4,000 ...more
10 gauge x 10' Birmingham #VH-1010-6, hydraulic box & pan finger brake, 24" back gauge, #SMVH10106
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sheet Metal Box and Pan Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: VH-1010-6
Capacity10 Ga. x 10'Bending Length120"Mild Steel10 GAStainless Steel12 GABending Angle0-135 DegreesMinimum Reverse Bend5/8"Horsepower5 HPDimensions (L x W x ...more
22" Acra #MDP-435VA, floor drill with powered down feed, #4MT, 125-4000 RPM, 2 HP, new, #SMMDP435VA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Single Spindle Drill Presses
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: MDP-435VA
Drilling CapacitySteel1"Cast Iron1-1/4"Tapping CapacitySteel3/4"Cast Iron15/16"Column Diameter4-5/16"Spindle Taper#4 MTSpindle Center To Column11"Spindle Nose to Table6-5/16" - 16-1/8"Spindle RPM125 - ...more
14"/20" x 40" Atrump #LD-1440, hardened & ground bed ways, 6" 3-Jaw scroll chuck, 3 HP, new, #SMLD1440
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sliding Gap Bed Lathe
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LD-1440
Swing Over Bed14"Swing Over Gap20-3/4"Swing Over Saddle8-3/4"Distance Between Centers40'.BedWidth of Bed Ways7-9/16"Top Slide Travel4"Cross Slide Travel6-1/2"SpindleSpindle Nose MountingSTD: ...more
14"/19" x 40" GMC #GML-1440BGF-1, 6" 3-Jaw chuck, 8" 4-Jaw chuck, 10" face plate, 3.75" Steady Rest, foot brake, cooolant, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sliding Gap Bed Lathe
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Gmc
Model: GML-1440BGF-1
Capacity14" x 40"Length of Work Piece40"Length of Cutting34"Swing Over Cross Slide8-1/4"Swing in Gap19-1/4"Width of Bed7-1/2"Gap to Spindle6-1/2"Gap to ...more
16"/21" x 40" Atrump #LD-1640, precision gap bed, hardened & ground bed ways, 6" 3-Jaw scroll chuck, new, #SMLD1640
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sliding Gap Bed Lathe
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LD-1640
Basic Dimension16"/21" x 40"Swing Over Bed16"Swing Over Gap21-3/4"Swing Over Cross Slide9-1/2"Distance Between Centers40".BedWidth of Bed Ways10"Top Slide Travel4"Cross ...more
32"/41" x 120" Birmingham #YCL-32120, 3 & 4-Jaw chucks, 4-way tool post, #5MT, Steady Rest, 10 HP, new, #SMYCL32120
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Sliding Gap Bed Lathe
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: YCL-32120
Capacity32"/41" x 120"Swing Over Bed32"Swing Over Cross Slide22-1/2"Swing in Gap41"Length of Gap10"Center Height16"Distance Between Centers120"Width of Bed16"Max. Section ...more
4.3' x 1/16" Birmingham #X-5016E-C, light duty power slip roll, standard 3-wire grooves, foot pedestal stand, new, #SMX5016EC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Slip Rolls
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: X-5016E-C
Max. Forming Width50"Roll Diameter3"Type:Slip RollOperation:HydraulicVoltageHorsepower1 H.P.Dimensions (W x D x H)71" x 24" x 44"Weight750 Lbs.Voltage220/440v 3 PhaseCapacity ...more
Tool and Cutter Grinders
1 Result
Atrump #CM-A, 12" x6" manual tool cutter grinder, digital read out on X, Y & A-Axes, 360 RPM workhead, new, #SMCMA
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Tool and Cutter Grinders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: CM-A
Capacity12" x 6".Work HeadSwing Over Main Slide (Diameter) 12"Collet Work Diameter1.25" (max) Collet Work Diameter0.19" (min) Spiral Angle60 ...more
Vertical Band Saws
11 Results
12" DoAll #2012-D12, semi-auto, for friable materials, 26" x 33" tilting table, 5 HP, new, #SM2012D12
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 2012-D12
Throat20"Operation:Semi-Automatic.Rectangle12" x 20"Round12"Table Size26-1/2" x 33-1/2"Table Height From Floor39"Maximum Work Height12"T-Slots2, 1/2" Blade Speed (Variable)550 - 5500 FPMBlade ...more
17-15/16" Acra #KB-45, single phase, saw blade welder, grinder, blade shear, work light, 85-375 FPM, 1 HP, new, #SMKB45
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: KB-45
Throat17-15/16"Type:Ferrous/Non-FerrousOperation:ManualMax. Work Height10-1/16"Table Size23-1/2" x 19-1/2"Blade Length141-1/8"Blade Width1/8 - 5/8"Blade Speeds85-375 FPMHorsepower1Voltage220/440V AC~ 3 PhaseDimensions43" x 25" x ...more
20" Acra #KV-50, vertical metal cutting, saw blade welder, grinder, blade shear, work light, 65-265 FPM, 2 HP, new, #SMKV50
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: KV-50
Operation:ManualType:Ferrous/Non-FerrousThroat20-1/2"Blade Length151-1/8"Table Size23-1/2" x 19-1/2"Max. Work Height12-3/8"Blade Speeds High400 - 1600 FPMBlade Speeds Low65 - 265 FPMBlade Width1/8" ...more
20" DoAll #2012-VH, metal cutting vertical contour, semi-auto, 30-5500 FPM, 20" wheel, 6 FPM, 3 HP, new, #SM2012VH
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 2012-VH
Throat20"Operation TypeSemi-Automatic.Table Size26-1/2" x 33-1/2"Table Tilt45 Right / 10 Left Table Height From Floor40"Maximum Work Height12"T-Slots2, 1/2" Blade ...more
20" DoAll #2013-V3, manual, 26" x 26" tilting table, 30-5500 FPM, 3 HP, new, #SM2013V3
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 2013-V3
Throat20"Operation TypeManual.Table Size26" x 26"Table Tilt45 Right / 10 Left Table Capacity500 LBSMaximum Work Height13"Table Height From Floor39"Blade ...more
20" DoAll #2013-V5, manual, vari-frequency AC inverter drive vert.contour, 30-5500 FPM, 5 HP, new #SM2013V5
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 2013-V5
Throat20"Operation TypeManualTable Size26" x 26"Table Tilt45 Right / 10 Left Table Capacity500 LBSMaximum Work Height13"Table Height From Floor39"Blade ...more
36" DoAll #3612VH, manual, vari-frequency AC inverter drive, 30-5500 FPM, 3 HP, new, #SM3612VH
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 3612VH
Throat36"Operation TypeManual.Table Size (Powered)26-1/2" x 33-1/2"Table Tilt45 Right / 10 Left Table Capacity500 LBSTable Stroke12"Table Feed0 - 6 ...more
36" DoAll #3613-V3, manual, vari-frequency AC inverter vert.contour, 3 HP, new, #SM3613V3
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 3613-V3
Throat36"Operation TypeManual.Table Size26" x 26"Table Tilt45 Right / 10 Left Table Capacity500 LBSMaximum Work Height13"Table Height From Floor39"Blade ...more
36" DoAll #3613-V5, vari-frequency AC inverter drive, 26" x 26" tilting table, 550-5500 FPM, 5 HP, new, #SM3613V5
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 3613-V5
Throat36"Operation TypeManual.90 Degree Rectangle13" x 36"90 Degree Round13"Table Size26" x 26"Table Tilt45 Right / 10 Left Table Capacity500 ...more
36" DoAll #Zephyr-ZV-3620, manual, 36" x 36" tilting table, 1000-15000 FPM, 15 HP, new, #SMZV3620
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: ZEPHYR-ZV-3620
39" Acra #KV-100, saw blade welder, grinder, blade shear, work light, 65-265 FPM, 2 HP, new, #SMKV100
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: KV-100
Throat39-3/8"Operation:ManualType:Ferrous/Non-FerrousMax. Work Height13-1/2"Table Size17-3/4" x 19-1/2"Blade Length178-5/8"Blade Width1/8" - 5/8"Blade Speeds Low65 - 265 FPMBlade Speeds High400 - ...more
Atrump #BM780H, 98" X, 33" Y, 27" Z, 8000 RPM, 20 automatic tool changer, Centroid M400 3-Axis with 15" LCD, 20 HP, new, #SMBM780H
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: BM780H
Table Size32" x 108" Load Capacity4,400 Lbs.Longitudinal Travel (X)98"Cross Travel (Y)33"Vertical Head Travel (Z)27.5"Spindle Nose To Table Top3.9" ...more
Atrump #D2203, 118" X, 82" Y, 39" Z, 4500 RPM, 24 automatic tool changer, CNC double column, 30 HP, new, #SMD2203
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: D2203
Travel X Axis118"Y Axis82.6"Z Axis39".TableTable Size70" x 118"T-Slot (Number/Size x Pitch)9 / 0.8" x 7.8"Number of Linear Ways ...more
Atrump #E216 Maxi-Mill, 26" X, 16" Y, 20" Z, 6000 RPM, 16 automatic tool changer, 7.5 HP, new, #SME216MAXIMILL
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: E216
Basic DimensionsTable14.2" x 34.4"Longitudinal Travel26"Cross Travel16.1"Vertical Travel20.1"Spindle Nose To Table Top4.1" to 24.2"Load Capacity900 lbsSpindle TaperBT40 or CAT40Spindle ...more
Atrump #E422, 16 Tools automatic tool changer Armless, 41.7" X, 22" Y, 24" Z, 6000 RPM, new, #SME422
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: E422
Basic DimensionsTable18.8" x 48.8"Longitudinal Travel41.7"Cross Travel22"Vertical Travel24"Spindle Nose To Table Top4.8" x 28.9"Load Capacity2000 lbsSpindle TaperBT40 or CAT40Spindle ...more
Atrump #L800, 16 automatic tool changer, 31.5" X, 20" Y, 24" Z, 8000 RPM, 25 HP, Centroid M400 Control, New, #SML800
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: L800
X/Y/Z Travel31.5" / 20" / 24"Distance From Spindle to Column23.1"Distance From Spindle to Table Top5.5" ~ 29.5".Working Table ...more
Atrump #M422W, 43" X, 24" Y, 27" Z, 8000 RPM, BT40 or Cat 40, 20 automatic tool changer, Centroid M400 with 15" LCD, new, #SMM422W
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: M422W
Tabel Size20" x 49"Load Capacity2,200 Lbs.Longitudinal Travel (X)43"Cross Travel (Y)24"Vertical Head Travel (Z)24"Spindle Nose To Table Top5" - ...more