Peterson Machinery Sales
804 W Gila Bend Hwy
Casa Grande, AZ 85122
Contact: Andrew Peterson
Tel: 231-944-4927
Fax: 520-836-1944
Email: machine@petersonmachinery.com

In the Surplus Record since 1982
Visit our Website: www.petersonmachinery.com
Peterson Machinery Sales, with over 300 used metal working machines in stock, has the largestinventory in Arizona and New Mexico. This includes presses, fabricating machines, and machine tools, as well as forklifts, cranes, and material handling equipment.


BALANCING MACHINES (Dynamic & Static)
35 lb. Gisholt #HBS-35, 30" swing, 42" centers, belt drive, Micro-Processor, excellent, 1990 Specsheet Photo(5)    

BLAST CLEANING & SHOT PEENING EQUIPMENT
TUMBLE BLAST CLEANING & SHOT PEENING
3 cu.ft. Blast-It-All #TBS Barrel Air Blast, multi-gun, recovery sys, dust collector, ' 98 Photo(5)    

BORING MILLS, HORIZONTAL, Floor Type, (Also See Table Types)
3" Carlton #3HB108, floor type, 120" vert, 200" horiz, 2700 RPM, threading, floor plate    

BRAKES, PRESS, HYDRAULIC (TONS) (Also See CNC Machinery & Equipment - Brakes, Press)
225 Ton, Pacific #K225-6, 3/8" x 6' , 6' OA, 4' 6" BH, flanges, 10" str, 20" DLO, recond, mint Photo(3)    
1000 Ton, Phillips & Davies, hydraulic, 24' overall, 240" between housing, 16" str, 36" DL, V die set, new hydraulic & controls Photo    

BRAKES, PRESS, MECHANICAL (TONS) (Also See CNC Machinery & Equipment - Brakes, Press)
135 Ton, Cincinnati #Series-5x4, mech, 6' OA, 4' 6" BH, 6' x1/4" , 35 SPM,. tooling, mint orig.cond Specsheet Photo(5)    

BROACHING MACHINES (Continuous Chain & Horizontal)
HORIZONTAL BROACHING MACHINES
50 Ton x 120" /180" str., LaPointe #50-120/180S.R.H.E, 7-70 FPM, 25 HP DC V/S Photo    

CNC MACHINERY & EQUIPMENT
LATHES, ENGINE (SHAFT), CNC
32" x 48" American #3204, Fanuc CNC, hard ways, 5" hole, 30 HP, tlng, low hrs, like new    

COIL HANDLING EQUIPMENT
COIL CRADLES
40000 lb. Rowe, 72" wide, 72" OD, vari-speed drive, excellent condition, 1990' s  

COIL HANDLING EQUIPMENT
COIL CRADLES & STRAIGHTENERS
20000 lb. Rowe, 60" width x 14 gauge, 4 over 5 roll straightener, variable speed drive, excellent, 1990' s Photo(2)    
25000 lb. Littell #C-250, 30" x .156" , cradle/straightener, pneumatic peeler/kick-out, variable speed Photo(2)    

COIL HANDLING EQUIPMENT
LEVELERS, PRECISION ROLLER (Also See Levelers, Tension)
14" x .080" Kohler / Bruderer #30400 B/T, Precision, 7 over 8, 4 hi, like new, 1983 Specsheet Photo    
54" x .102" McKay, precision leveler; 8 over 9, 25 HP    

COIL HANDLING EQUIPMENT
UNCOILERS, Including Coil Reels, Centering
4500 lb. PA Industries #SRA-4516, coil reel, 16" W x 65" OD, vari-speed, like new, 2009 (2 available)    
75000 lb. Sesco, double cone, 84" wide, 72" OD, dual hold-down, all hydraulic, coil car, 1981 Specsheet Photo(4)    

COOLING TOWERS, (Also See Chillers)
450 Ton, Marley QuadraFlow, Fiberglass, 100 HP pumps/fan, Arizona, exc.condition,1990' s    

CUT-TO-LENGTH LINES
4" x .080" Precision, 2500 lb., 7 over 8, 4 hi-rolls, hydraulic shear, vari-speed, PLR control  
10" x .060" Red Bud, 4000 lb.coil, common base, very compact, CNC/PLR control  
10" x .105" Rowe, 6000 lb., 3 over 4 straightener, feeder, shear, V/S, self-contained  
15" x .5" Schleicher, hydraulic feeder, 150 ton shear, self-contained, compact, 1997 Photo(4)    
22" x .250" RBI / Rowe, hyd feed/shear, 6000 lb., 3 over 4 straightener, vari-speed  
30" x .094" gauge Red Bud, 6500 lb.coil, 3 over 4 straightener, 16" - 21" diameter inside coil, 10-45 FPM, 2-1/2" x 36" long straightener rolls Specsheet Photo(2)    

DRILLS, DEEP HOLE & GUN, HORIZONTAL
Technidrill / Carlton #5HB horiz, 120" vertical Y-Axis, 160" horiz.X-Axis, 2" x 50" drill,1990' s Specsheet Photo(7)    

ELECTRICAL DISCHARGE MACHINES (EDM), RAM TYPE (SINKERS), CNC & MANUAL
Sodick #A6R, fine ram type EDM, clean, 27.55" x 19.86" table, 121 gal.,1990' s Specsheet Photo(2)    

FORGING MACHINERY & EQUIPMENT
BULLDOZERS (Also See Upsetters)
150 Ton, Williams White, 12" x 48" ram/resist head, 24" /36" /48" DLO, 12" stroke, reconditioned Photo(2)    

FORGING MACHINERY & EQUIPMENT
HAMMERS, FORGING AIR & STEAM for Metal Forming
750 lb. Chambersburg #L, C-type, high frame, air drop, tooling, 6" L-R x 11-1/2" F-B, 18" throat, 14-1/4" x 6" bed, excellent condition Specsheet Photo(4)  

FORGING MACHINERY & EQUIPMENT
REDUCER ROLLS, FORGING
Ajax #0, forging roll, 12" diameter x 14" W, 6" overhung, air clutch, 20 HP, reconditioned, excellent condition Specsheet Photo(11)    

FORGING MACHINERY & EQUIPMENT
RING ROLLERS, FORGING
Kyoei-Seiko #TCR-250V, cold ring roller, hi-speed precision, automatic feed, hi-production, 1994 Specsheet Photo(10)    

FORKLIFT TRUCKS (Also See Trucks, Industrial)
62000 lb. Hyster #H620B, forklift, Detroit diesel, completely refurbished Specsheet Photo(7)    

FURNACES & OVENS
MELTING TYPE - INDUCTION FURNACES (Also See Induction Heating)
10 KW Pillar #MK-12, melting/pouring system, vari-freq, 20 lb.crucible, non-ferrous,1990' s Photo(5)    
18 KW CEIA / FIOA #F16-D/400, melting/pouring system, 25-100 KHz, 10-20 lbs.crucible, like new, 4" diameter x 7" depth, 2003 Photo(3)    

GRINDERS, BELT (Also See Sanders, Belt)
6" -8" -10" Hammond, Sundstrand, Acme, Porter-Cable, large selection, reconditioned  
72" Timesavers #372, wet/dry, 75 HP, oscillation, 112" -120" sanding belt length, excellent Specsheet Photo(5)    

GRINDERS, CYLINDRICAL, PLAIN, ANGLE HEAD (Also See Grinders, Angle Head)
22" x 30" Norton #10/20x36C High Swing, 24" gap, 30" wheel, 25 HP, automatic dresser, variable speed, 100-200 RPM, electrical controls Photo(3)    

GRINDERS, CYLINDRICAL, UNIVERSAL
48" x 24" Norton Hi-Swing Univ, chucking type, 30" whl, 15 HP, DRO, hydraulic feeds, Aerospace Specsheet Photo(4)    

GRINDERS, FORM
Sheffield #187D, Crush-Tru, GE/Fanuc CNC, dresser, 9" x 30" whl, 35HP, Aerospace, mint Specsheet Photo(8)    

HONES, ABRASIVE FLOW
Extrude Hone / Dynaflow #HL60CF-830, dual station indexer, Media chiller & refeed,1990' s Photo(2)    

KEYSEATERS
3" Mitts & Merrill #5, 30" stroke, hi-speed, hydro/mechanical, tooling, reconditioned (2 available) Photo    
4" Mitts & Merrill / Fromag #RA-CNC, hydraulic, 30" keyway, 3 Axis CNC, spiral cut.option, ' 94 Specsheet Photo(4)    

LATHES, ENGINE, OIL FIELD & HOLLOW SPINDLE
26" x 192" LeBlond Regal, 5" spindle hole, 900 RPM, rapid travel, hardways, taper, tooling Specsheet Photo(4)    

LOCOMOTIVE PARTS
MISCELLANEOUS (LOCOMOTIVE PARTS)
Axles: Alco #RS-3 locomotive axles, several new, with bearings, (10) available Photo    

PLANERS, DOUBLE HOUSING & OPENSIDE (Also See Millers, Planer Type)
24" x 24" x 36" Rockford Hyd, 24" x 36" table, rail/side head, Oilgear hydraulic, beautiful cond.  
32" x 25" x 10' Rockford, hydraulic, 32" x 120" table, rail/side/tracer, Oilgear hydraulic, low hrs, exc. Specsheet Photo(4)    
36" x 38" x 28' Cincinnati Hypro, 36" x324" table, 2 rail head, side head, 50 HP variable speed, 1 owner Specsheet Photo(6)    

PLASTIC & RUBBER MACHINERY & EQUIPMENT
PRESSES, RUBBER
200 Ton, Rutil, vertical rubber inj, 24" x 24" die space, 1000 centers, low hrs, like new, 2005 (4 available) Specsheet    
250 Ton, Rutil #RSO 1200/250, CNC horiz.rubber inj, 1100 centers, hi-spd rotary indexing, ' 05 Specsheet Photo(6)    
500 Ton, Rutil #RS-SX-2000/250, vertical rubber inj, 2000 centers, 24" x 30" bed, excellent, 2001 Specsheet Photo(3)    
800 Ton, Maplan, CNC rubber inj.molding, 3000 centers, vertical up-act, like new, low hrs, 2005 Specsheet Photo(8)    
900 Ton, Rutil Technostar #2000/350F, CNC rubber inj.molding, 3000 centers, vertical up-act, ' 05 Specsheet Photo(4)    

PRESSES, DIE CUTTING (CLICKER)
10 Ton, Ward, pneumatic, 4 post up-acting, 2" str, 6" DLO, 24" x 54" bed, PLR control, unused, 2001  
20 Ton, Preco #1420, 4-post hydraulic, 14" x 20" bed, hi-speed, Micro-Processor, excellent,1990' s Photo(2)    
60 Ton, Preco #1420, 4-post hydraulic, 14" x 20" bed, Servo feed, Micro-Processor, exc.,1990' s Photo    
120 Ton, Preco #1420, 4-post hydraulic, 14" x 20" bed, Servo feed, Micro-Processor, exc., 2003 Photo(2)    

PRESSES, DISHING & PORTAL
500 Ton, Eason / Enerpac, hydraulic, 8' x12' bed, 12" stroke, 72" DLO, multiple rams, like new, ' 12  

PRESSES, EXTRUSION (Also See Stretchers, Extrusion)
250 Ton, Rutil, lead wire, .22" -.45" wire, 4" x 15 billet, indirect, complete system with rewind, 2005    
400 / 500 Ton, HPM, 4" -5" x 15" -20" billet, complete, recond, several, Eng' r & Tech support Photo  
700 Ton, Loewy, 5x17" billet, die slide, stump shear, Rexroth hydraulic, new PLC controls, recond Specsheet Photo(4)    
750 Ton, Schloemann, hydraulic, 4" x20" billet, die changer, Stump shear, induction billet htr Specsheet Photo(3)    

PRESSES, GAP FRAME, SINGLE CRANK
150 Ton, Rousselle #G2-150, gap frame press, 4" stroke, 18" SH, 104" BH, 35 SPM, 100" x 24" slide area,, 34" bed to floor, 35 SPM Specsheet Photo    

PRESSES, HORIZONTAL
250 Ton, Advance, 4-post horiz., 175" stroke, 245" DLO, 36" x 40" bed area, 150 HP hydraulic,1990' s    
400 Ton, Erie, 4-post horiz., 175" str., 245" DLO, 36" x 40" bed area, 200 HP hyd sys, PLC, ' 94    

PRESSES, HYDRAULIC (Also See Presses, Laminating and Presses, Molding)
250 Ton, Advance, 4-post horiz., 175" stroke, 245" DLO, 36" x 40" bed area, 150 HP hydraulic, ' ' 90' s    
250 Ton, Verson #50HD160T, hydraulic, 48" x60" bed, 72" stroke, 114" DLO, 250 HP, hi-spd, HPM hydraulic system, Gov' t storage, like new Photo(5)    
350 Ton, Verson #250HD160T, straight side, 72" str, 120" DLO, 48" x 60" bed, hi-speed, like new Specsheet Photo(5)    
400 Ton, Erie, 4-post horiz., 175" str., 245" DLO, 36" x 40" bed area, 200 HP hydraulic sys, PLC, ' 94    
500 Ton, Accudyne, 4-post, 60" x 100" bed, 24" stroke, 30" DLO, cushion, PLC control, 2011 Specsheet Photo(3)    
600 Ton, Farquhar, straight side, 72" str, 144" DLO, 50" x 50" , 500 HP, oilgear, hi-speed Specsheet Photo(2)    
800 Ton, Maplan (Austria), 2500 psi, 4 post down-act, 46" x64" bed, 28" x44" btwn, 26" stroke, 51" DLO, CNC Control, ' 06 Specsheet Photo(8)    
900 Ton, Rutil #Technostar-2000/350F, (Italy) 4 post down-act, 44x59" bed, 26" stroke, 52" DLO, CNC, ' 05 Specsheet Photo(4)    
2000 Ton, Engel, 4-post, down-act, 75" stroke, 138" DLO, 55" x 72" btwn posts, like new, 1995 Specsheet Photo(4)    
2000 Ton, Reed City, 6-post, up-act, 30" x 68" bed, 18" DLO, 6" str, no pit, low profile, ' ' 90' s Specsheet Photo(4)    

PRESSES, HYDRAULIC, C-FRAME (GAP FRAME)
150 Ton, Hannifin C-Frame, traveling gantry, 18" stroke, 18" x 20' bed, 24" DLO, very rare Photo(3)    
200 Ton, Hannifin, gap frame, hydraulic, 36" x 72" bed/ram, 48" stroke, 65" DLO, reconditioned Photo(4)    

PRESSES, HYDRAULIC, DOUBLE AND/OR TRIPLE ACTION
550 Ton, Cincinnati, triple action, 400/200/100 ton, 4-post, 4x4' bed, 45" stroke, 78" DL, rebuilt 2007 Specsheet Photo(8)    

PRESSES, HYDRAULIC SHOP, H-FRAME
200 Ton, Lumus #17-436, H-frame hydraulic press, 74" between dual posts, 48" stroke, 100" DLO, 5-1/2" diameter tie rod, 96" daylilght1990' s    

PRESSES, HYDRAULIC STRAIGHTENING
150 Ton, Nugier, hydraulic, 5-Axis, 120" x 168" bed, 172" between housing, 3' DLO, 24" daylight, 20" stroke, 2 heads, 1980' s Specsheet Photo(3)    
200 Ton, Hannifin C-frame hydraulic, 2-Axis travelling hd, 18" x 240" bed, 30" str/DLO, reconditioned   
200 Ton, Parker Heim, 3-Axis, travelling head, 78" x 144" bed, 5" str, 24" DLO, 2008  
250 Ton, Verson 3250HD160T, traveling gantry, 72" str., 48" x 60" bed, 120" DLO, very rare Photo(5)    
350 Ton, Clearing, 18" stroke, 48" DLO, 4' x 16' table, travel.head, 12' travel, 1972 Photo    
500 Ton, Atlas / HPM, 3-Axis, travelling head, 48" x 192" table, 5" stroke, 0-48" DLO, all steel construction, 1990' s Specsheet Photo    
500 Ton, Easom plate straightening/dishing press, 12' x 50' plate capacity, 4 head, full automatic, 10-Axis PLC Control, 2011 Photo(3)    

PRESSES, HYDRAULIC, WHEEL
660 Ton, Univ.gear puller/wheel press, 10000 psi, job site portable/stationary, 3' -8' diameter, 24 stroke Photo(2)    

PRESSES, LAMINATING (Also See Presses, Molding Compression)
15 Ton, Ward, pneu, 4 post up-act, 2" str, 6" DLO, 24" x 54" heated platen, PLR control, unused, ' 00 Photo(3)    
2000 Ton, Reed City, 6-post, up-act, 30" x 68" bed, 6" str, 12" DLO, htd.platens avail, recond Specsheet Photo(4)    

PRESSES, MOLDING COMPRESSION HYDRAULIC (Also See Presses, Laminating)
500 Ton, Accudyne, 4-post, 58" x 96" bed, 26" stroke, 30" /60" DLO, (2) heated platens, PLC Control, 2011 Photo(3)    
2000 Ton, Engel, 4-post, horiz./vert, 75" stroke, 138" DLO, 55" x 72" btwn posts, like new, 1995 Photo(4)    

PRESSES, O.B.I., BACK GEARED, SINGLE CRANK
110 Ton, Verson, OBI press, heavy duty, 27" x 42" bed, 8" str, 18" SH, 40 SPM, air clutch Specsheet Photo(2)    

PRESSES, SERVO DRIVE
5 Ton, Peco / Promess, C-frame, Siemens CNC, 12" str, 18" DLO, 12" x 12" Bed, hi-speed, 2013  

PRESSES, STRAIGHT SIDE, DOUBLE CRANK (Single Action)
250 Ton, Clearing #S2-250-84-48, 12" stroke, 32" SH, 30 SPM, 92" BH, air clutch, S/N 51-1339 Specsheet Photo    
600 Ton, Farquhar #HS-600-H50-50, hydraulic, 50" x50" bed, 72 stroke, 144" DLO, inner/outer rams, mint, 15" diameter main ram Photo(2)    

ROLLFORMERS (Also See Sheet Metal Machinery)
16 Stand, Bradbury, 37" RS, gear driven, 3" shafts, 50hp V/S, coil reel, complete, 1980' s Specsheet Photo(6)    
16 Stand, Yoder, 54" bldg panel rollforming line w/embosser, complete re-install incl Specsheet Photo(10)    

ROLLING MILLS & RELATED METALS INDUSTRIAL EQUIPMENT
ROLLING MILLS, 4 HI
4-1/4" x 16" x 12" Bliss, 4 hi, cold reduction, V/S, pay-off/rewind, complete, recond Specsheet Photo(3)    

ROLLS, PLATE BENDING, INITIAL & DOUBLE PINCH TYPE
16' x 1" Hilles & Jones, 3 roll, 21" top roll, 60 HP V/S, hydraulic drop, PLC, no pit, reconditioned  Specsheet Photo(4)    

ROLLS, PLATE BENDING, PYRAMID TYPE
16' x 3/4" Hilles & Jones, power.drop end, power.roll lift, V/S, PLC control, no pit, reconditioned  Specsheet Photo(4)    

SAWS, BAND, VERTICAL (Bandsaws)
36" DoAll #HP-36, high column, 30" -70" under guides, vari-speed, power.feeds available  Specsheet Photo(9)    
36" Tannewitz #3600MH, block & plate saw, hydraulic feed, high precision, special options Specsheet Photo    
36" Tannewitz #G1NE, 18" -48" under guide, 15 HP, low hours, 2003, several in stock Photo(2)    
36" -52" Tannewitz, 18" -48" vertical capacity power.fds, engineering specialists, 70 saws in stock  
36" Tannewitz, 72" -200" traveling head, block & plate saw, power.fd, high precision Specsheet Photo    
60" Tannewitz #60MH, block & plate saw, hydraulic feed, high precision, special options Photo(4)    

SAWS, PLATE & BLOCK
H.E.M. #PM25/96, 96" cut length, 25" thick, 2-5/8" blade, 15 HP, chip conv, mint condition Specsheet Photo(6)    
Kasto #BBS-620/1060, 157" travel, 42" throat, 28" vert, 2-1/2" blade, hydraulic feed / clamping Photo(3)    
Kasto #BBS1260/1560, 200" travel, 60" throat, 50" vert, 3" blade, CNC control, mint Specsheet Photo(11)    
Tannewitz #3000, 40' long x 8/12" thick x 30" throat, 2" blade, CNC control, 2003  
Tannewitz #3000, 25' long x 12" thick x 30" throat, 2" blade, CNC control, 1997  
Tannewitz #3000MH1, 144" length, 9" /12" thk, 2" blade, 55-350 FPM, variable speed, hydraulic clamp, PLC controls, 1994/2003 (2 available) Photo(2)    
Tannewitz bevelling type plate saw, 240" , tilting/travelling head, 2-5/8" blade, 20" vert  
Wean United Special, 300" travel, 45" /60" vert, 28" thrt, 4" blade, 200 ton block capacity  

STRETCHERS, EXTRUSION (Also See Presses, Extrusion)
25-110 Ton, Farrel /Wean-United/Loewy, hydraulic, De-Twist, 50' -130' run-out, reconditioned, several Specsheet Photo    

SWAGING MACHINES (Swagers)
2-1/2" Abbey Etna rotary, 2 die, 12 roller, 2-1/2" tube, 1" solid, 3" x 7" dies, 20 HP, exc Specsheet Photo(4)    

THREADERS, BOLT
2" Oster #792A, bolt threader, single head, 1/8" -2" pipe capacity, 1/4" - 2 bolt capacity, 5 HP, reconditioned, many in stock Photo(4)    

TOOLING & MACHINERY ACCESSORIES
ROTARY TABLES & INDEXERS, CNC (Also See Rotary Tables, Manual)
12" - 14" Tsudakoma #RNCM, rotary tables, 4th axis, 40H7 diameter nose, several Photo(3)    

TUBE MACHINERY
PILGER MILLS
2-1/2" Tube Reducer Pilger Mill, 1-1/2" input tube, 96" tube length, 100 HP Photo(2)    
3-1/2" Tube Reducer Pilger Mill, 144" tube length, 24" stroke saddle, reconditioned with spare tooling & parts, 125 HP Photo(3)    

WIRE MACHINERY
DRAWERS, WIRE
MacBee #30WD, 30 blocks & dies, hi-precision, .125" -.001" , complete line, never used, 2001 Specsheet Photo(4)    

CIRCUIT BREAKERS, AIR INDOOR TYPE
600 VOLT CLASS
175 Amps, ITE / ABB, KB, air type circuit breaker Photo(4)    
1200 Amps, ITE / ABB, KB, air type circuit breaker, 3 poles Photo(4)    
1200 Amps, Westinghouse, DB-50, air circuit breaker, S/N: 32Y8414 Photo(4)    

CIRCUIT BREAKERS, AIR INDOOR TYPE
5000 VOLT CLASS
1200 Amps, General Electric, AM-4.16-75-1 Magne-Blast, air type circuit breaker Photo(4)    

GEAR REDUCERS, Without Driving Unit
125 HP @ 1750 RPM, Hansen #RDF44, right angle, 90:1 ratio, never used Specsheet Photo(4)    
376 HP @ 1150 RPM, Lufkin #147B, 2.38:1 ratio, parallel power gear reducer Specsheet Photo(4)    
500 HP @ 1150 RPM, Lufkin #S148C, parallel power gear reducer, 3.2:1 ratio Specsheet Photo(3)    

GENERATORS, A.C., DIESEL ENGINE DRIVEN, 60 CYCLE
750 KW General Motors #12-567-E, Electromotive EMD division generator, low hours Specsheet Photo(4)    

GENERATORS, HYDRO-ELECTRIC
500 KW, Teledyne / Kato / Xtek, complete hydro-electric generating system, 1985 Specsheet Photo(10)    
1000 KW, Teledyne / Louis-Allis, complete hydro-electric generating system, 1985 Specsheet Photo(8)    

MOTOR STARTER CONTACTORS ONLY, MAGNETIC & VACUUM
180 Amp. Westinghouse, LF-25H230 AC contactor Photo(4)    
360 Amp. Westinghouse, LF-50H430, motor starter contactor Photo(4)    

POWER SUPPLIES
RECTIFIERS, PLATING, DC OUTPUT, AC INPUT
12000 Amp. 1-9 VDC LV, 480 V. HV, Rapid DC power supply Specsheet Photo(4)    

 = photo available     = spec sheet available     = request quote from seller    Visit Dealer's listings = Visit dealer's equipment listing

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise