Browse:  Machinery Electrical
RSS Blog Surplus Record

ROLLS, PLATE BENDING, INITIAL & DOUBLE PINCH TYPE

All Types of Fabricating & Chip Machinery
There are 211 listings in this category
Update: Thur, Feb 21, 2019 00:33:30
Advanced Search
Return to original sort

3.5' x 22 ga. Hendley #2-42-Niagara/416E-Pexto, initial pinch plate roll, (2) machines on one base  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 20 Feb 2019)
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
8' x 5/16" Bertsch #8L, initial pinch plate roll, 8-1/2" roll diameter, air drop end, #70892  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 19 Feb 2019)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10' x 1" Roundo #SP360, 3-roll hyd plate roll, 14.17" diameter all bending rolls, '83, #71553  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 19 Feb 2019)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6' x 1/4" Webb #R3L, mechanical powered plate roll, manual drop end, power rear roll adj, #A5336  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 18 Feb 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
8' x 1/4" Lown #B-600, initial pinch power roll, air drop end, power rear roll adj., #A3142  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 15 Feb 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
4' x 16 ga. Birmingham #X-5016C, manual slip roll, 3:1 gear ratio, (3)wire grooves, new, #SMX5016C  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 15 Feb 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6' x 1/4" U.S. Industrial #USR625, initial pinch, 3-rolls, 12.5 FPM, 5.5 HP, 2014, #5302  Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 15 Feb 2019)
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
6' x 16 ga. National #NR7216, hydraulic, forward & reverse drum switch, front gear, 1 HP, new, #SMNR7216  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 15 Feb 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10.2' x 1.77" Faccin #HAV3145, 3-roll vari-Axis, 17.7" top roll, 60 HP, supports, '12, #29182  Camera icon Spec Sheet RFQ (Date: 14 Feb 2019)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
5' x 1/4" Lown #B662, slip roll, 6" roll diameter, 63" roll length, 36" pass line, power rear roll adjustment, 16-1/2 FPM, #28032  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Feb 2019)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
6.6' x 1/2" Biko #B3-2021, double initial pinch plate bending machine, 2008  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 12 Feb 2019)
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross
6' x 1/4" Akypak, 3-roll initial pinch, DROs, drop end, cone rolling attach., exc., 2016  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 12 Feb 2019)
Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe
5.2' x 5/16" Webb #R3L-R, initial type power bending roll, 7-1/2" roll diameter, 14 FPM, 1978  Camera icon Spec Sheet RFQ (Date: 12 Feb 2019)
Kingsmen Machinery Co, Burnsville, MN 952-890-2419 (Email: kingsmenmachinery@msn.com) George Stensgard
15' x 1/2" Bertsch #11, hyd plate roll, 15" roll diameter, 14 FPM, auto.tilt control, 1992, #71223  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Feb 2019)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10' x 1/4" Webb #6L, initial pinch plate roll, 9" roll diameter, 15 FPM, air drop end, #70511  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Feb 2019)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
20' x 1/4" Roundo #PS-320, hydraulic, hard rolls, digital positioning readouts, late mdl, #29109  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Feb 2019)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10' x 1" Montgomery #4R-120100, 4-roll hydraulic ., drop end, cone bending attach., #C5128  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 7 Feb 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
8' x 1" Bertsch #14, initial pinch roll, 14" roll diameter, air drop end, vari-roll speed, power front & rear roll adjustment, #13858T  Camera icon RFQ (Date: 7 Feb 2019)
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin
8' x 5/16" WDM #K-9-8, initial, hydraulic, 9" rolls, 2-roll driven, 22 FPM, 10 HP, 2016, #29488  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 6 Feb 2019)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10' x 1.25" Pullmax #PV7, hydraulic double pinch, large pass through 10"   Camera icon PDF icon RFQ (Date: 3 Feb 2019)
Revolution Machine Tools Inc, North Salt Lake, UT 385-321-3934 (Email: kyle@rmtus.com) Kyle Jorgenson
10' x 2-5/8" Bertsch #30, hydraulic, 0-16 FPM, hyd drop end, ind.hyd motors, 3 driven rolls, '81  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 31 Jan 2019)
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.
6' x 7/32" WDM #B-6-72, initial pinch, 2-roll hydraulic, 6" diameter H & P rolls, 5 HP, DRO, '19, #30433  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 28 Jan 2019)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
5' x 10 ga. WDM #B-5-60, initial pinch, 3-roll hydraulic, 5" diameter rolls, v-speed, DRO, 3 HP, '19, #30431  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 28 Jan 2019)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
6' x 10 ga. Roundo #IP-120/6, plate roll, 3-rolls, 4.72" diameter rolls, 1.5HP, foot switch, '98  Camera icon RFQ (Date: 25 Jan 2019)
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
6.6' x 1/4" Birmingham #RH-0606, hydraulic plate bending double pinch roll, LED position indicator, new, #SMRH0606  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6' x 1/2" Webb #7L-9006, initial pinch power roll, serial #6541, #5509  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 1-1/4" Herkules #UB12, IP, power drop end, cone rolling, remote ped.control, #5139  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 3/8" Montgomery #6037H, hydraulic, 8" roll diameter, hyd drop end, cone rolling, control, #7810  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 14 ga. Metalform #504R-HDP-6014, 4-roll hydraulic double pinch power roll, 2002, #6113  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4' x 12 ga. Montgomery #412H, hyd initial pinch power roll, 4-1/4" roll diameter, 15 FPM, #7171  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
16' x 7/16" WDM #100-15-16, plate roll, #13418  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12' x 1/4" Bertsch initial pinch power roll, serial #8640, #5723  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10' x 3.62" Davi #MAV3072, 3-roll vari-axis, 28.34" top roll, o/head support, CNC, '11, #29442  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
10' x 1/2" Imcar #SIHR-12/5, hyd double pinch, 11" roll, 15 HP, auto tilt, DRO, 2002, GP-20860IP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
10' x 1/4" Birmingham #RH-1006, heavy duty hydraulic bending roll double pinch, LED position indicator, new, #SMRH1006  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10' x 10 ga. Webb #R3L, 7.5" diameter roll, 14 FPM, air drop end, power.roll adj., 7.5HP, #7331P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 5/8" Webb #9-L, initial pinch plate roll, serial #5175, #5493  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 1/2" Webb #7L-1108, initital pinch power roll, 11" roll diameter, 8-15 FPM, 2003, #7697HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 3/8" Lown #G900, initial pinch power roll, 9" top roll/8-5/8" bottom roll diameter, #7305HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 3/8" Faccin Biko #B4-2524, 4-roll, 9.5" top roll, DRO, cone att, hyd drop end, #088397  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
4' x 16 ga. National #NR4816, forward & reverse drum switch, front gear, foot switch, stand, 7.5 HP, new, #SMNR4816  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10' x 1/2" Bertsch #9, plate roll, 5CR relay control panel, air drop end, gear guards, #A4924  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 20 Jan 2019)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
24' x 1/4" Bertsch, mechanical plate roll, 15-1/2" roll diameter, initial rolling  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 17 Jan 2019)
FMI Trading LLC, Vinton, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen
4' x 5/16" Webb #R3LR-650, 6" diameter rolls, skid mounted, groved rolls for bending rounds  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 11 Jan 2019)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6.5' x 11 ga. Waldemar #K-6-6.5, hyd initial pinch plate bending, 2017  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 9 Jan 2019)
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
4.3' x 14 ga. Waldemar, 3-roll, 1.5 HP, 54" roll, 4-3/8" roll diameter, initial pinch plate roll  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 9 Jan 2019)
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
16' x 1" Bertsch, plate roll, 20" rolls  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 8 Jan 2019)
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
10' x 1/4" Bertsch, Initial Pinch Roll, 9" diameter roll, variable speed drive with reverse  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 7 Jan 2019)
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: jamie@greenwayassoc.com) Clark Groeneweg
5' x 10 ga. Wysong & Miles #C60, slip roll, 5" roll diameter, 32" pass line, 21 FPM, manula drop end w/automatic balance bar, 3 HP, #28025  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 Jan 2019)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
4' x 13 ga. Baileigh #PR-413, plate bending roll, 3-1/2" roll diameter, 42" pass line, 1.5 HP, power rear roll adjustment, 2008, #27938  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 Jan 2019)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
10.2' x 8" Davi #MAV3010, hydraulic, CNC, new in stock, immediate delivery  Visit Dealer's Equipment Listings  RFQ (Date: 2 Jan 2019)
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
4.16' x 24 ga. Tin Knocker #TK-2450, manual slip roll, 2" roll diameter, lifting split roll  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Dec 2018)
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
4' x 3/8" Webb #R3L, plate roll, initial pinch  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Dec 2018)
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster
5' x 10 ga. Wysong & Miles #C60, initial pinch plate roll, 3 HP, mechanical drop end  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 27 Dec 2018)
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy
5' x 10-12 ga. Lown #G-562, slip roll, 5" roll diameter, 31" pass line, air drop end, #27844  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 26 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
6' x 5/8" WDM #100-10-6, initial pinch, 10" roll diameter, cone attach, hydraulic dropend, 10 HP, 1998  RFQ (Date: 21 Dec 2018)
Hoff Machinery, Inc, Minneapolis, MN 612-521-5700 (Email: nikki.greenwaldt@hoffmachinery.com) Sales Dept.
13' x 3/4" Bertsch #14, initial pinch plate rolls, air drop end, great shape  RFQ (Date: 20 Dec 2018)
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy
6' x 1/4" New Dimension #P6.250, hydraulic powered plate roll, 7" roll diameter, foot pedal  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 13 Dec 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
4.3' x 16 ga. Birmingham #X-5016E-C, light duty power slip roll, standard 3-wire grooves, foot pedestal stand, new, #SMX5016EC  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 13 Dec 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12' x 3/16" Webb #6L, mechanical powered plate roll, 9" roll diameter, 8-16 FPM, 10 HP, start/stop push button  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 13 Dec 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
8' x 3/8" JMT Durma #HRB4-2510, 9.06" roll diameter, 10 HP, 4-roll, NC control, 2016, #29481  Camera icon Spec Sheet RFQ (Date: 13 Dec 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
12' x 1/4" Webb #501, plate roll, 5" shaft diameter, pendant control, manual drop end, #3436  Camera icon RFQ (Date: 12 Dec 2018)
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein
8' x 3/16" Lown #B-798, slip roll, 7" roll diameter, air drop end, power rear roll, 19 FPM, #27779  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
6' x 12 ga. Webb #2L, slip roll, intital type, 5" roll diameter, 34" pass line, 3 HP, manual drop end, manual roll adjustment, #27866  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
6' x 14 ga. Roundo, 4-roll, hydraulic, 4.3" roll diameter, hydraulic drop end, #27399  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
4' x 1/4" Webb #R-3-L-R, slip roll, 6-1/2" roll diameter, 34" pass line, 12 FPM, air drop end, #27971  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
10'2" x 5/8" Webb #9L, S38913  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
10' x 10 ga. Hendley & Whittemore, 7" roll diameter, drop end, rear & bottom roll adj, #27622  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
8' x 1/2" Webb #7L-1108, slip roll, 11" roll diameter, 36" pass line, 8-16 FPM, air drop end, #27970  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
18' x 7/8" Heller, 4-Roll CNC plate bending roll, hydraulic, 40 HP, 2003, #61938  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16.8' x 1-1/2" Branch #HPV38-5, initial pinch plate roll, hydraulic, 100 HP, 1978, #70098  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10' x 2.25" Davi, 4-roll, pyramid, Siemens Simatic multi-panel CNC Operator Terminal, Auto Balancing sys., '05, #CD5145  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10' x 1.5" Roundo #PS460/10, hyd double pinch roll, 60 HP, pendant control, 1980, #67277  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10' x 1/2" Bertsch #9, initial pinch roll, power roll adjust., air drop end, 1975, #69612  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
1.4' x 16 ga. Initial Pinch Power Roll, 26 FPM, Air Drop End, Support Tbl, 2 HP, #8236HP  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 6 Dec 2018)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
MG #F03A. 2-rolls plate bending, pneumatic tilting sys., stock box & end pieces, 2015 (2 available)  Camera icon RFQ (Date: 5 Dec 2018)
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck
4' x 12 ga. Reed #450, slip roll, 4-1/4" roll diameter, 30" pass line, 18 FPM, 1.5 HP, #27912  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Dec 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
10' x 1/4" Bertsch #8, plate roll, air drop end, geared rear roll, 8-1/2" roll diameter, #69986  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Dec 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5' x 10 ga. WDM, initial pinch, V/S, 3rd roll driven, electric DRO, power rear roll adj., new  RFQ (Date: 3 Dec 2018)
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson
4' x 8 ga. Initial pinch, H&P rolls, 3rd roll driven, power adj., elec.DRO, power disconnect, new  RFQ (Date: 3 Dec 2018)
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson
4' x 12 ga. WDM, initial pinch, 4" diameter roll, variable speed, 3rd roll driven, new  RFQ (Date: 3 Dec 2018)
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson
12' x 1/4" Lenco #H1212, 2 roll style, 12' length, 1/4" thick., 12" diameter top/bottom rolls, 1989  Camera icon Spec Sheet RFQ (Date: 1 Dec 2018)
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
4' x 10 ga. Davi #MCB-1219ZS, hydraulic, 4-roll initial pinch w/vert.support system, s/n #20140046, used, 2001, #A4642  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 30 Nov 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12' x 3.5" Bertsch #34, mechanical pyramid plate roll, #C5110  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 30 Nov 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12' x 9/16" Bertsch #11, 14" top diameter, 20 HP, air drop end, pedestal control, vari-speed, #A5164  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 30 Nov 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10' x 1/2" Quantum #G3014-C, double pinch hydraulic 3-Roll, plate bender, digital display, permanent lube sys., new, #SMG3014C  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 30 Nov 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6' x 3/16" Lown #B674, initial pinch plate roll, forward/reverse, 3-roll drive, #71109  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 27 Nov 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
3' x 16 ga. Akyapak #A-1050X56, IP roll, 2004  Camera icon Spec Sheet RFQ (Date: 25 Nov 2018)
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney
10' x 8" Davi #MAV3010, 3-roll hydraulic, CNC, 70% discount, new in stock  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 21 Nov 2018)
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
10' x 2.62" Davi #MCB3070WT, 4-roll double pinch, 27.56" top roll, conveyor, CNC, '11, #29441  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 21 Nov 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
4' x 12 ga. Webb #4048, slip roll, 33" pass line, 1.5 HP, manual drop end w/automatic balance bar, #27976  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 15 Nov 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
10' x 1/2" Heisteel #ASY-2-HA, Hydraulic Plate Roll, DRO  Camera icon RFQ (Date: 13 Nov 2018)
Metalfab Inc, Indianapolis, IN 317-733-0268 (Email: karl@metalfab.us) Karl Vanderbur
4' x 3/16" Comeq #1P 110/4, s/n 1151, nice clean surplus machine, 1984  RFQ (Date: 6 Nov 2018)
Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer
10' x 1/2" Roundo #PS255, 3-roll, 10.04" diameter roll, cone rolling, pendant controls, 2011  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 5 Nov 2018)
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
10' x 1/2" Haeusler #VRM-HY-3000x12, 4-roll, hydraulic drop end, 1968  Camera icon Spec Sheet RFQ (Date: 1 Nov 2018)
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Scott Yoder
5' x 14 ga. Wysong & Miles #B-60, initial pinch, 4" roll diameter, 18 FPM, manua drop end, #4998  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 29 Oct 2018)
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
10' x 1-1/2" Webb #22L, 22" diameter roll, 60 HP, 10-18 FPM, Air Drop End Yolk, #5209  Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 29 Oct 2018)
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
10' x 10 ga. Hendley & Whittemore #4-H, 7" Roll diameter, manual drop end, #4985  Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 29 Oct 2018)
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
10' x 3/4" Rollshear #ASY-2H, Plate Roll, s/n 70297, 1977  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 25 Oct 2018)
Bud's Machine Tools, Kamas, UT 385-271-6717 (Email: bud@budsequipment.com) Bud Jorgenson
9.8' x 1-3/8" Pullmax Kumla #PV7H, Power Plate Roll, Double Initial Pinch  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 25 Oct 2018)
Bud's Machine Tools, Kamas, UT 385-271-6717 (Email: bud@budsequipment.com) Bud Jorgenson
8' x 5/16" Bertsch Century II #7, initial pinch hydraulic roll, #12057  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 18 Oct 2018)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6.2' x 16-18 ga. Roper Whitney #PF4-74, initial pinch power roll, #9433  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 18 Oct 2018)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6' x 12 ga. Built Rite #P6.105, plate roll, #11468  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 18 Oct 2018)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8.2' x 3/8" Webb #6L, bending roll, #8383  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 18 Oct 2018)
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8' x 5/16" Hoston #W12-8X2500, 4 rolls, CNC Touchscreen prog.control on pedestal, new, 01/2015  Camera icon RFQ (Date: 15 Oct 2018)
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff
6' x 5/8" WDM #100-10-6, initial pinch, 10" roll diameter, 3" x 1" bar on edge, 10 HP, 10" roll diameter, 1998  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 9 Oct 2018)
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan
15' x 1/4" Bertsch #11, initial pinch power roll, air drop end, powered rear roll adj., #5986P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 5 Oct 2018)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
6.6' x 1/4" Faccin Biko #B4-2020, 4-roll, auto hyd roll balance, hyd drop arm, '14, #088370  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Oct 2018)
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
4' x 18 ga. Pexto #418E, initial pinch power roll, 3" roll diameter, 15 FPM, 3/4 HP, manual drop end, #7359  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Oct 2018)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 1/4" Wysong & Miles #D-60, mech. initial pinch, 6" diameter rolls, 7.5 HP, air drop end, '80  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Oct 2018)
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10' x 12 ga. Niagara #6-120, initial pinch power roll, 25 FPM, 5 HP, #4546  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Oct 2018)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
Vibro-Shear #MM8 (Pullmax type), universal plate cutting/working/nibbler  Camera icon RFQ (Date: 3 Oct 2018)
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
6' x 12" Pneumatic rubber pinch roll, 12" roll diameter, 50:1 ratio, 1-1/2 HP, #71038  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 Oct 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12' x 5/16" Bertsch #9-10-12, initial pinch, vari-speed frequency drive, air drop-in, exc  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 2 Oct 2018)
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy
12' x 3/16" Bertsch #7, initial pinch power roll, 9" roll diameter, 8-15 FPM, air drop end, #6471P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 1 Oct 2018)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10' x 1.75" Biko #3HCD, double iniitial pinch, 20.9" top roll, hyd drop end, reconditioned'02  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 26 Sep 2018)
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
12' x 5/8" Bertsch #11, initial pinch, power roll adjustment, drop end, 1975  Camera icon RFQ (Date: 24 Sep 2018)
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark
5' x 3/16" Waldemar #400-5.6-5.4, hyd 4-roll double pinch, power roll position & tilt, V/S, '99, #9480  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Sep 2018)
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10' x 1/2" Bertsch #11, plate roll, 11-1/2" roll diameter, 48" pass line, Bijur lube, #27678  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Sep 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
10' x 1/2" Bertsch #11, initial plate bending roll, air drop end, lube system, #69138  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Sep 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
8' x 1/2" Montgomery #9650H, hydraulic plate roll, 20 HP, 17 FPM, hydraulic drop end, auto lube, pendant controls, 1977  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 31 Aug 2018)
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
4' x 14 ga. Cole-Tuve " Amerecon" #SR-4-86, 3.4" roll diameter, swing out top roll, #27305  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Aug 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
3' x 12 ga. Built-Rite #MP.3.105, initial pinch rolls, 1999, #157781  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 27 Aug 2018)
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
10.2' x 1.77" Faccin #HAV3145, 3-roll variable axis plate roll, 2013, #11248  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 20 Aug 2018)
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig
10' x 1/2" Faccin #4HEL3134, 4-roll, 13.4" top roll, hyd drop end, Siemens control, 2013  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 20 Aug 2018)
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
8' x 3/8" Bertsch #8, bending roll, power rear roll adj., 9" diameter roll, 10 HP, 1947, #157563  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Aug 2018)
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
4' x 16-18 ga. Pexto #3418-F, 3" rolls, foot switch, #BL120  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Aug 2018)
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand
8' x 1-1/4" Roundo #PS-420, plate bending roll, #18088  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 6 Aug 2018)
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
10' x 1" Davi #MCB3037, 16" top roll diameter, 20 HP, overhead support, LED readouts, '98, #29124  Camera icon Spec Sheet RFQ (Date: 1 Aug 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
10' x 2-3/8" Bertsch #30, mech, initial pinch, extra top roll, updated controls, under power  RFQ (Date: 31 Jul 2018)
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: roger@smfmachine.com) Roger Huntsman
10' x 2.36" Faccin Biko #B3-3158, 3-roll double pinch, 22.83" top roll diameter, 75 HP, '14, #29111  Camera icon Spec Sheet RFQ (Date: 23 Jul 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
8' x 10 ga. Webb #R3LR-7008, initial pinch, 7" top roll, air drop, power roll adj.  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
6' x 16 ga. Wysong & Miles #B-72, initial pinch, 4.25" top roll, 3-roll dr.  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
5' x 1/4" Lown #B600, initial pinch, 6" top roll, 3-roll dr.  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
5' x 10 ga. GMC #PBR-510, initial pinch, 4.5" top roll, late  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
4' x 16 ga. Roper Whitney #3418-H, 3" top roll, 3-roll dr., rod grooves, 1988  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
10' x 3/16" WDM #100-7-10, pinch pyramid, 7" top roll, 3-roll dr., hydraulic drop  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
10' x 20 ga. Rolshear #2-H, initial pinch, 4.5" top roll, 3-roll drive  Camera icon Spec Sheet RFQ (Date: 17 Jul 2018)
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
13' x 3/4" Bertsch #14, initial pinch plate roll, 13.2" roll space, 30 HP, 1960' s  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 4 Jul 2018)
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp
5' x 3/16" New Dimension #5.250, bending roll, 5 HP, 16 FPM, hydraulic drop end, forward/reverse, foot pedal, #157217  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jun 2018)
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
5' x 10 ga. Hendley & Whittemore #510, 5" roll diameter, 16 FPM, manual drop end, #4757  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jun 2018)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 18 ga. Milton, slip roll, 4-1/2" roll diameter, drop end, rear & bottom roll adj, #26586  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Jun 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
7' x 14 ga. Surianos, 4-3/4" roll diameter, power rear & top roll adjustment, drop end, #25495  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Jun 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
14' x 1/4" Bertsch #9, 10-1/2" roll diameter, air drop end, power rear roll adjust, #26254  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Jun 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
2' x 18 ga. Acrotech, 6" urethane roll, 3-1/2" upper steel roll, air drop end, '01, #25216  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 7 Jun 2018)
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
36' x 1/2" Bertsch #1, hydraulic plate roll, #C5103  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 3 Jun 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12' x 5.87" Voest Alpine, hydraulic (hot rolling) plate roll, used, #C5029  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 3 Jun 2018)
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10' x 3" Haeusler #VRM-HY10/3, 4-roll double pinch, 6" maximum, 30" top roll, 214 HP, 1978, #20651  Camera icon Spec Sheet RFQ (Date: 17 May 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
14' x 5/8" Bertsch #75-14, 4-roll hydraulic plate roll, DRO, 30 HP, 0-14 FPM, 1994, #7996P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 3 May 2018)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 5/8" Webb #9L, initial pinch plate bending rolls, vari-speed, rebuilt 1999, #69938  Camera icon Visit Dealer's Equipment Listings  RFQ (Date: 27 Apr 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4' x 10 ga. Hendley & Whittemore #48-10, 5" roll diameter, bending roll, forward & reverse, #155619  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 20 Mar 2018)
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
8' x 1/2" Webb #7L-1108, initial pinch rolls, 15 HP, 230 /460 V.  Camera icon RFQ (Date: 20 Mar 2018)
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
10' x 1/2" Webb #9L, mechanical, 11.5" roll diameter, initial rolling, 10 HP, 440 V.  Camera icon RFQ (Date: 16 Mar 2018)
FMI Trading LLC, Vinton, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen
6' x 1/2" Webb initial pinch, 9" roll diameter, power rear roll, air drop end, 1987, #22329  Camera icon Spec Sheet RFQ (Date: 15 Mar 2018)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
5' x 12 ga. Luna #8344-15120, CNC bending rolls, 3.54" roll diameter, 1996, #13593J  Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 16 Feb 2018)
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin
4' x 1/4" Wysong & Miles #Perfect-Circle, initial type bending roll, 6" roll diameter, power adjust., air drop end, Tag #15440  Camera icon RFQ (Date: 16 Feb 2018)
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
10' x 12 ga. Initial type plate roll, 5" diameter rolls, manual adjust, tag #14900  Camera icon RFQ (Date: 16 Feb 2018)
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
10' x 2" Bertsch #24, IP plate roll, 22-1/2" top roll diameter, 23-1/2" lower roll diameter, #63395  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Feb 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4' x 1-11/16" Bertsch #18, heavy duty, 50" rolls, 17" roll diameter, hydraulic drop end, 50 HP, #62696  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 Feb 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
15' Maschinenfabrik Weingarten #BRF-VIII, plate roll, drop end, #65428  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 Feb 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5' x 5.5" Cincinnati pinch roll, pneumatic roll hold down, 75" x 5.5" rolls, #69154  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 30 Jan 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12' x .625" Bertsch, serial #M10279  Camera icon RFQ (Date: 29 Jan 2018)
Plant Machinery & Equipment, Excelsior, MN 952-933-1725 (Email: pmempls@msn.com) Jerry Brokaw
12' x 1/2" Bertsch #11, initial pinch rolls, 12-1/2" roll diameter, air drop end, #69569  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 23 Jan 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4' x 16 ga. Pexto #418-E, 3" diameter roll, 1969, #156826  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 19 Jan 2018)
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
8' x 1" Bertsch #14, initial pinch, power front & rear roll adj., s/n #M9437, #69638  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 17 Jan 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
8' x 1" Bertsch #14, initial pinch plate rolls, serial #M7172, #67208  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 17 Jan 2018)
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10' x 2" Bertsch #24, initial pinch plate roll, serial #M-9267, #6659  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 29 Dec 2017)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
3' x 22 ga. DiAcro #36, power sheet metal roll, 2" diameter rolls, 36" length, 1" min.radius, foot control, work stand, 1/3 HP, #15888  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Dec 2017)
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
6' x 10 ga. Montgomery #7210, initial pinch, hydraulic, 3-rolls, 6" roll diameter, 5 HP  RFQ (Date: 28 Nov 2017)
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick
10' x 8" Davi #MAV30130, CNC plate roll, never used ready to ship, 2010  Camera icon Spec Sheet RFQ (Date: 10 Nov 2017)
Pacific Machine Tools LLC, Carlsbad, CA 760-431-3560 (Email: maurycohn@gmail.com) Maury Cohn
6' x 16 ga. Waldemar #HIP-4-72, hydraulic, 2000  RFQ (Date: 3 Oct 2017)
Madison Machinery Co Inc, Riverhead, NY 631-722-4214 (Email: joe@madisonmachinery.com) Joe Madison
6' x 7/16" WDM #403-9-6, 4-roll, 9" diameter, H & P rolls, 14 FPM, 10 HP, 2015, #29159  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Aug 2017)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
12' x 1/2" Webb #9L, 12' plate roll, 25 HP motor with Westinghouse Max SE  Camera icon RFQ (Date: 11 Aug 2017)
Used Solutions Inc, Algonquin, IL 815-759-5000 (Email: markm@usedsolutions.com) Mark Mammen
4' x 16 ga. Rolshear #PR4-48, initial pinch power roll, serial #20364, #5749  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Aug 2017)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10' x 5/8" Pullmax #PV7H/911 Kumla, hydraulic, 13-5/8" diameter roll, hydraulic drop end, 20 HP, #7261P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Aug 2017)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 1-1/2" Bertsch #20, hydraulic, initial pinch, 3-roll, 20" top roll, 75 HP, 1980, #25791  Camera icon Spec Sheet RFQ (Date: 11 Aug 2017)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
6' x .154" Hoston, new  Camera icon RFQ (Date: 25 Apr 2017)
Plant Machinery & Equipment, Excelsior, MN 952-933-1725 (Email: pmempls@msn.com) Jerry Brokaw
4.2' x 10 ga. Hendley & Whittemore, initial pinch plate roll, 4.75" rolls  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 5 Feb 2017)
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
12' x 5/8" Bertsch #11, initial pinch, 14" roll diameter, 20 HP, V/S, air drop end, no pit, #27210  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 18 Jan 2017)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
4' x 5/8" Webb #6L, 8-16 FPM, manual drop end, power.rear roll adj., 10 HP, #7262P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 14 Nov 2016)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
8' x 5/8" Webb #9L-1208, initial pinch power roll, #4965  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 11 Nov 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12' x 1/2" Webb #9L-1312 LH, air drop end, power front/rear roll adj, cone cap, '75, #7240P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 31 Oct 2016)
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12' x 5.87" Voest Alpine, hydraulic (hot rolling) plate roll  Camera icon Spec Sheet RFQ (Date: 22 Sep 2016)
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Scott Yoder
6.8' x 3/16" Saber #R-0650H, initial pinch, 7" roll diameter, coning, DRO, hyd bending roll  Spec Sheet RFQ (Date: 2 Sep 2016)
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
4' x 16 ga. Lown #B300, initial pinch power roll, serial #B-3342, #6159  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
6' x 16 ga. Milton #M400, initial pinch power roll, #6201  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 12 ga. Brown & Boggs #4561, initial pinch power roll, #4808  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5' x 14 ga. Niagara #353, initial pinch, 4" roll diameter, 15 FPM, manual drop end, #4548  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4' x 12 ga. Niagara #351, Initial Pinch Power Roll, #4992  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4' x 14 ga. New Dimension #MP4-075, initial pinch power roll, serial #8871043, #5577  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4' x 16 ga. Pexto #418E, hand slip roll, 3" roll diameter, with stand, #5783  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 28 Jul 2016)
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
Sampson #HPK-65, vertical angle bending rolls, double pinch, 2.5" capacity, 2010  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jun 2016)
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
12' x 1/2" Webb #9L, plate roll, 25 HP motor with Westinghouse Max SE  RFQ (Date: 22 Jun 2016)
Used Solutions Inc, Algonquin, IL 815-759-5000 (Email: markm@usedsolutions.com) Mark Mammen
4' x 16 ga. Peck Stow & Wilcox #3418, plate rolls, initial pinch, 3" roll  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jun 2016)
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
9'10" x 1.18" Malco #CLI-HY3R30/25-30, 3-roll, 18.8" diameter top, 17.7" diameter bottom rolls, 1996  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 3 May 2016)
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
10' x 1-1/4" Bertsch #18, 18" roll diameter, hydraulic drop end, 50 HP, 1976, #18107  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 2 May 2016)
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
14' x 12 ga. Webb #6L, IP, 3-rolls, 7" roll diameter, 10 HP, power rear roll adjustment, #25280  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Apr 2016)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
20' x 1/4" Roundo #PS-320, hardended rolls, digital positioning readouts, remote operator control, late model  Camera icon RFQ (Date: 27 Jan 2016)
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
4' x 16 ga. Pexto #3418, plate bending rolls, 3" diameter rolls, initial pinch, drop end  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jan 2016)
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman
30' x 3/4" Pope #8, pinch rolls, 2" capacity at 4', never installed, 1954  Camera icon RFQ (Date: 4 Dec 2015)
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
16' x 1" Hilles & Jones, 3 roll, 21" top roll, 60 HP V/S, hydraulic drop, PLC, no pit, reconditioned   Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 22 Jul 2015)
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
12' x 4" Wilhelmsburger #DWVH-3660/120, 37.4" Top Roll, 34.6" Bottom Roll, 1975, #23890  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 9 Jul 2015)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
10' x 8" Davi #MAV3010, 50" top roll diameter, Davi CNC, cone rolling, brand new, #18470  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 8 Jul 2015)
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
10' x 1.969" M.G. #AK-350, 3 roll initial pinch hydraulic plate bending machine, 2008  Camera icon Spec Sheet RFQ (Date: 19 Dec 2014)
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
4' x 8 ga. WDM #B5-48, initial, hydraulic, power bending roll adjust., 3 HP, new, #20245  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ (Date: 13 Mar 2013)
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
5' x 1/4" Saber #R-0570H, initial pinch, 7" roll diameter, coning, DRO, hyd bending roll  Camera icon Spec Sheet RFQ (Date: 10 Aug 2012)
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
4.3' x 8 ga. Saber #R0440H, Initial Pinch, hydraulic, 4-3/4" roll diameter, hardened, 2 HP  Camera icon Spec Sheet RFQ (Date: 10 Aug 2012)
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
10' x 1/4" U.S. Industrial, well equipped, inexpensive, new  RFQ (Date: 28 Mar 2011)
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams
10' x 2-3/4" M.G. #AK370, 3-Roll Pre-Pinch Plate Bending Roll  Camera icon Spec Sheet RFQ (Date: 1 Sep 2010)
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
10' x 5-1/8" M.G., 130mm x 3100mm 3-roll hydraulic double initial pinch  Camera icon Spec Sheet RFQ (Date: 25 Mar 2010)
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
6' x 1/4" U.S. Industrial, well equipped, inexpensive, new  RFQ (Date: 28 Aug 2009)
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

Back to Machinery & Machine Tool listings.


Photo icon = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    camera icon = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise