Advanced Search
Surplus Record logo

GEAR TESTERS

Gleason #519, Universal Angular Hypoid Gear Tester, 24" diameter at 180 deg, 36" diameter at 90 degree, 5HP, #28072

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Manufacturer: Gleason
Model: 519
Stock #: 28072
Price: Request a Price

Dealer Information
Mohawk Machinery Inc logo
Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com
  
Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


519 GLEASON UNIVERSAL ANGULAR HYPOID BEVEL
GEAR TESTER
NEW 1964, SERIAL 631502, MODEL NO. 519

FOR TESTING THE RUNNING QUALITIES OF BEVEL, HYPOID,
SPUR AND HELICAL GEARS UP TO 24″ (610MM) DIAMETER
FROM 0 TO 180 DEGREE SHAFT ANGLE AND UP TO 36″ (914MM)
DIAMETER AT 90 DEGREE SHAFT ANGLE

EQUIPMENT / FEATURES:
HYDRAULIC CHUCKING ARRANGEMENT FOR BOTH
GEAR AND PINION WORK-HEADS (LESS DRAW-IN BAR AND NUTS)
OPTIONAL DRIVE-HEAD SPINDLE BORE
(6″ DIA. X .75" TAPER PER FT. X 3" LONG)
POWER MOVEMENT OF DRIVE HEAD ( IN / OUT )
OPTIONAL BRAKE-HEAD SPINDLE BORE
(3-29/32"DIA. X 39/64" TAPER PER FT., X 3" LONG)
ARRANGEMENT FOR “SWING PINION CONE″ (SPC FEATURE)
METHOD FOR TESTING TOOTH BEARING
AUTOMATIC BACKLASH CONTROL FOR PRESET BACKLASH
SINE BAR SET-UP ARRANGEMENT
IMPERIAL SCALES & VERNIERS
MANUAL, HAND OPERATED BRAKE TO SIMULATE LOAD
OPTIONAL AMMETER FOR CHECKING BRAKE LOAD
FULL ELECTRICS (MOTORS/CONTROLS)
(CONFIGURED FOR 440 VOLT 50/60 CYCLE OPERATION)

PRINCIPAL SPECIFICATIONS
MAX DIAMETER OF BEVEL GEAR AT 90 DEGREE SHAFT ANGLE       36" (914MM)
MAX DIAMETER OF BEVEL PINION AT 90 DEGREE SHAFT ANGLE       12" (305MM)
MAX OFFSET OF GEAR SPINDLE ABOVE OR BELOW PINION
SPINDLE CENTER       6" (152MM)
SHAFT ANGLE RANGE       0 TO 180 DEGREES
MAXIMUM DIAMETER OF PARALLEL SHAFT GEAR
W/ANGULAR HEAD SETTING W/MAX. OFFSET       49" (1245MM)
MAXIMUM DIAMETER OF PARALLEL SHAFT PINION
W/ANGULAR HEAD SETTING W/MAX. OFFSET       25" (635MM)
MAXIMUM CENTER DISTANCE       25" (635MM)
MINIMUM CENTER DISTANCE       0" (0.0MM)
PINION SPINDLE TAPER HOLE DIAMETER
(AT LARGE END      6″ (152.4MM)
PINION SPINDLE TAPER (PER FT.)      .75″ (19.05MM)
PINION SPINDLE TAPER DEPTH      3″ (76.2MM)
GEAR SPINDLE TAPER HOLE DIAMETER (AT LARGE END)      3.9″ (99.21MM)
GEAR SPINDLE TAPER (PER FT.)      0.618″ (15.47MM)
GEAR SPINDLE TAPER DEPTH      3″ (76.2MM)
MAIN MOTOR      5 HP 1800 RPM
HYDRAULIC MOTOR      ¾ HP 1800 RPM
MACHINE OVERALL LENGTH      90″ (2286MM)
MACHINE OVERALL WIDTH      75″ (1905MM)
MACHINE OVERALL HEIGHT      72″ (1829MM)
APPROX NET WEIGHT      10,555 LBS. (4,798 KGS)