HONES, HORIZONTAL (Also See Superfinishers)
Sunnen #MBC-1803J, automatic power stroke hone honing machine, loaded w/tooling, excellent, runs smooth, late model 1995
|Manufacturer: Sunnen |
|Stock #: 2362|
|Rohner Machinery Sales Inc
2430 Cypress Way
Fullerton, CA 92831-5100
Detailed Product Description
Sunnen MBC-1803-J Power Stroking Hone
In absolute excellent condition both working & cosmetically.
Rare, late model Sunnen stroker with all the bells & whistles as shown.
You don't find them often in this new & this clean.
Comes loaded with tooling. Spindle & power stroke run smooth & quiet.
The MBC-1803 Precision Honing Machine is to be used for finishing bores in small workpieces. In finishing bores, this machine can achieve any or all of the following results: fast stock removal, consistent final size, a high degree of cylindricity, fine surface finish.
This machine was well taken care of. Backed by our 30-day return privilege.
DIAMETER RANGE (I.D.)
Power stroking .060 - 3.75"
Manual stroking .060 - 6.50"
Workpiece weight 6 lbs.
STROKE LENGTH RANGE
Automatic sizing Up to 10" open end bores
Power/manual stroking Up to 16" open end bores
Spindle speeds (12) 200-2500 rpm
Stroke rate 80,110,160,220&310 spm
Stroke motor 1/2 hp with
Spindle motor 1 hp with
Coolant pump motor 1/2 hp
Coolant Pump rate 1.5 gpm
Coolant capacity 28 gallons
Coolant requirements Sunnen industrial honing fluid
Floor space 72"D x 49"W x 67"H
Floor weight (with coolant) 1160 lbs
Floor load 151 lbs/sq.ft.
Electrical requirements 220V, 60Hz, 3Ph, 9.7A
Pneumatic requirements 80 to 100 psi
Manual or Automatic modes of operation with auto shut-off
Self-Contained Coolant System
KKN-141 Universal Honing Fixture
Stone Saver Feature
Various Truing sleeves
Various Guide Shoes
Offset Torque Bar
220V, 3Ph Input Power
The MBC-1805 Precision Honing Machine is to be used for finishing bores in small workpieces. In finishing
bores, this machine can achieve any or all of the following results: fast stock removal, consistent final size, a
high degree of cylindricity, fine surface finish.
As there are numerous workpieces which can be honed on this machine, all the possible combinations cannot
be discussed here
About the Dealer
Rohner Machinery, a family owned business with over 35 years experience in the metalworking field, specializes in both conventional & CNC milling & turning machinery including fabricating & EDM machinery. We cater to both large and small shops offer a full rebuild & repair center that can tackle most anything.