SAWS, MITER (Mitre)
12.5" Amada #HKA-400, fully automatic, w/mitering, 12.5" round, loaded w/features, exc, '13
| Blade Capacity: 12.50"|
|Stock #: 2335|
|Rohner Machinery Sales Inc
2430 Cypress Way
Fullerton, CA 92831-5100
Detailed Product Description
Amada HKA-400 Horizontal Automatic Mitering Bandsaw
In absolute excellent condition both working & cosmetically.
Rare, late model Amada HKA-400 bandsaw with all the bells & whistles.
Made in Japan! This saw retails for $56,000 new!
Features fully auto "walk-away" operation with mitering capability.
Everything on this machine is in 100% working condition and comes loaded with features.
This machine was well taken care of. Backed by our 30-day return privilege.
Capacity Round Diameter 12.6" at 90 degrees
8.9" at 45 degrees
3.9" at 60 degrees
Cutting Capacity Rectangle (WxH) 16" x 11" at 90 degrees
8.9" x 11" at 45 degrees
3.9 x 11" at 60 degrees
Work Load Capacity 880 lbs
Blade and Vise Operation
Dimensions (LxTxW) 12.9" x 0.042" x 1-1/4"
Blade Speed 100-325 ft./min. Inverter
Tension Control Manual - Split Clutch
Top Limit Setting Automatic Setting with Quick
Cutting Control Oil Pressure Flow ControlValve
Type Front and Main Vise
Control Hydraulic Full Stroke Cylinder
Saw Blade Motor 3 HP
Hydraulic Pump Motor 1 HP
Cutting Fluid Pump Motor 1/10 HP
Power Supply Voltage AC220V /- 10%, 3 PH, 60 Hz
All other Voltages require
Power Requirement 10.7 kVA
Cutting Fluid and Hydraulic
Tank Capacity 10.7 gal.
Pump Type Electric
Pressure Setting 391 psi
Chip Disposal Manual
Index Mechanism Shuttle Vise
Length 2.4" x 39.3"
Number of Input Station 1
Number of Cut Off Pieces 1-9999
Remnant Length 2.8"
Machine Dimension Head Up Position 84.3" x 92.3" x 73.4" (WxLxH)
Machine Dimension Head Down Position 84.3" x 92.3" x 64.0"
Table Height (above Floor) 30.3"
Machine Weight 3528 lbs
8 degrees Saw Head Cant
60 degrees Miter Capabilities
Auto Index, Only at 0 degrees
Full Stroke Vise
Inverter Blade Speed Control
Light Beam Marking
Post Construction Type Saw Head
Saw Head Frame–The rigid “C" section
frame carries the mountings for the two band
wheels, heavy-duty worm gear drive reducer,
band drive motor, and guide arm mounting
Band Wheels and Drive System–The
inverter-controlled band drive motor is
directly coupled to the worm gear reducer,
eliminating the friction losses found in
variable-speed pulley drive systems. The
drive wheel transmission is designed and
manufactured by Amada to provide high efficiency speed reduction (with no external
cooling required) to deliver more power to the
drive wheel. Band speed is set using the band
speed adjustment knob on the control panel.
Canted Head and Single-Column Mounting–
The head is canted 8º
to enable the machine
to cut rolled sections (e.g., I-beams or
rectangular tubing) at significantly faster
rates as the blade is never in full contact
with the horizontal section of the material.
The single-column mounting enables the
saw guides to be much closer together, as
compared to scissor-type machines, which
improves the cutting performance.
Full-Stroke Clamping Vise–The full-stroke
clamping vise reduces the operator setup
time for different widths of material.
Manual Vise Inching Control–The vise
inching control enables the operator to more
accurately locate the work piece for the cut
by inching the vise. Then, with the help of
the shadow line projector, the operator can
make any small adjustments necessary to the
position for the desired cut.
Guarding–The saw band is covered by heavy gauge guarding in all non-cutting areas,
improving operator safety.
About the Dealer
Rohner Machinery, a family owned business with over 35 years experience in the metalworking field, specializes in both conventional & CNC milling & turning machinery including fabricating & EDM machinery. We cater to both large and small shops offer a full rebuild & repair center that can tackle most anything.