Advanced Search
Surplus Record logo

IRONWORKERS

5" x 5" x 1/2" Spartan Marvel #IW66D, hyd ironworker, 66 ton, punch holder, jog mode

Request a Quote
More Photos & Detailed Specs
Share
Click for video
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable
Image unavailable Image unavailable

General Specifications


Angle Capacity" L: 5.00" L
Angle Capacity" W: 5.00" W
Capacity: .500"
Manufacturer: Spartan
Model: IW66D
Ton: 66
Stock #: 1539
Price: Request a Price

Dealer Information


Naab Sales Corporation
9151 International Pkwy Ste.1
New Hope, MN 55428

Contact: J.Van Heuveln
Tel: 952-933-6755
Fax: 952-933-7229
Email: john@naabsales.com
Cell: 952-836-5784
Gold Level Dealer Since 2007
Website: www.naabmachinery.com/

View our Equipment Listings

Detailed Product Description


Stock Number: 1539
Spartan Marvel 66 Ton Hyd Ironworker

This Machine comes with Alot of tooling,
10" Brake, Multiple Punches and Dies Etc.

General Specifications: (All specifications must be verified by buyer)
Make: Marvel Spartan
Model: IW66D
Serial # IW66D-152

PUNCHING
Punch Pressure: 66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and
easy setup.
Die Holder: Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling: 1-1/2" in 3/8" material.
Large Tooling: 2" in 5/16" material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling: 6" in 3/32" material.
Maximum Channel Flange: 7".
Throat Depth: 12" (D); 20" (DX).
Stroke Length: 3-15/16".
Cycles per Minute in 3/4": 30.
Punching Station Work Height: 39-3/4".

FLAT BAR SHEARING
Flat Bar Shear Capacity: 14" in 9/16".
Maximum Width x Thickness: 10" in 3/4".
Lower Blade: Four (4) usable edges.
Support Table: Includes guides for accurate positioning and
indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down: Holds work piece securely in position
when shearing.
Upper Shear Blade: Provides for minimum distortion. Two (2)
usable edges.
Blade Length: 14-1/4".
Angle Flange Trim: 4".
Flat Bar Shear Work Height: 36".


ANGLE SHEARING
Maximum Capacity – 90 degrees: 5" x 5" x 1/2".
Maximum Capacity – 45 degrees: 2-1/2" x 2-1/2" x 5/16".
Shearing with no material loss and minimum deformity.
Shear Blades: Four (4) usable edges.
Angle Shear Work Height: 43-3/4".


BAR SHEARING
Round Bar Max. Capacity: 1-1/2".
Square Bar Max. Capacity: 1-1/2" x 1-1/2".
Five Cavity Round and Square Bar Shear Sizes:
Round 1/2", 1", 1-1/2"
Square 3/4", 1-1/2".
Channel Shear Max. (optional): 5".
I-Beam Shear Max. (optional): 5".
Bar Shear Work Height: 48".


NOTCHING
Rectangular Notcher: 2" x 3-1/2" in 5/16" material.
Electrical Interlock Safety Guard
Gauge Table with Stops: For precise positioning.
Notcher Work Height: 36-1/4".


OTHER STANDARD EQUIPMENT
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals (2)
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Currently Wired 230 Volt 3 Phase 20.5 Full Load Amp
Machine Net Weight: 3,969 lbs.
Machine Dimensions: (D) 68" L X31" W X67"

Model: Model: IW66D
1 Units in Stock