ur stock number: 402510
5/8 , Citizen K16EVII,(1M7) Mits, 2011, HPC, Mist Collector, Live tools, Barfeed
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
Equipped With (Must Be Verified By Buyer):
=Coolblaster CB510 10 line high pressure coolant
=Coolblaster Mist Collector
=Lexair Rhino Barfeed 6' bars
=(4) Rotary Driven Cross Drills GSC807 Holders
=(2) Rear Live End Working GSC1107 Holders
=(1) Double-Face Static BDF107 Holder
=All available manuals, wrenches & tool holders
Additional GSE 2507 Double End Live Holder separate purchase ...Price: $5,000
Replacement value $12,400
General Specifications As Per Brochure:
Control: Cincom System 7M
Mitsubishi Meldas 70LPC
Axes: X1, Y1, Z1, X2, Z2, C1, C2
Plus A7 - Loader Axis
Maximum machining diameter (D): 0.62"
Maximum machining length (L): 7.87" / 1 chucking
Maximum front drilling diameter: 0.39"
Maximum front tapping diameter (tap, die): M8
Spindle through-hole diameter: .78"
Main spindle speed: 15,000 rpm
Maximum drilling diameter for gang rotary tool: 0.19"
Maximum tapping diameter for gang rotary tool: M4
Spindle speed of gang rotary tool (Rating): 6,000 rpm (Rating: 4,500 rpm)
Maximum chuck diameter of back spindle: .63"
Maximum protrusion length of back
spindle work piece: 1.57"
Maximum protrusion length: 3.15"
Maximum drilling diameter for back spindle: .24"
Maximum tapping diameter for back spindle: M5
Back spindle speed: 10,000 rpm
Maximum drilling diameter for back
tool post rotary tool: 0.19"
Maximum tapping diameter for back
tool post rotary tool: M5
Spindle speed of back
tool post rotary tool (Rating): 4,500 rpm
Maximum number of tools to be mounted: 23
Turning tools on the gang tool post: 6 to 7
Cross rotary tools: 4 to 8
Rotary tools for front drilling: 4
Tools for front drilling: 3 to 4
Tool (gang tool post): 1/2"
Chuck and Bushing
Main spindle collet chuck: TF20
Back spindle collet chuck: TF20
Rotary tool collet chuck: ER11
Chuck for drill sleeves: ER11, ER16
Guide bushing: 0201
Rapid feed rate
X1 and Y1 axes: 0.94 ipm
Z1, X2 and Z2 axes: 1 ipm
Spindle drive: 4 HP
Gang tool post rotary tool drive: 0.53 HP
Back spindle drive: 1 HP
Back tool post rotary tool drive: 0.53 HP
Coolant oil: 0.33 HP
Weight: 4,850 lbs
Dimensions (approx): 72" x 42" x 66"