Advanced Search
Surplus Record logo

CNC MACHINERY & EQUIPMENT
MACHINING CENTERS, VERTICAL, CNC Mills

Brother #TC-S2DN, CNC drill/tap VMC, 19.7" X, 15.7" Y, 11.8" Z, 16k RPM, 14 ATC, BOO control, 2013

Request a Quote
More Photos & Detailed Specs
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable

General Specifications


Manufacturer: Brother
Model: TC-S2DN
Automatic Tool Changer: 14ATC
Longitudinal" X: 19.7" X
Cross" Y: 15.7" Y
Vertical" Z: 11.8" Z
RPM: 16000
Year: 2013
Stock #: 3369
Price: Request a Price

Dealer Information


Machinery Works Inc
420 Technology Way
Saukville, WI 53080-1677

Contact: Bob Wescott
Tel: 262-284-5611
Email: bob@machwksinc.com
  
Gold Level Dealer Since 2005
Website: www.machwksinc.com

View our Equipment Listings

Detailed Product Description


Brother TC-S2DN CNC Vertical Drill/Tap Machining Center
Age: 2013
Condition: Pre-owned
Stock Number: 3369

We have two of these machine which came out of a cnc cell. They were installed proved out and then the plant closed after only running test parts for a automotive group. We bought a total of 13 machines out of this plant and have moved 7 of them all to our facility and 6 to a customer. These machine have been sitting for three years and we have them under power in our facility cleaned and inspected by our service technician and as of April 2018 the machine recorded 2141 power on hours with 1218 cutting hours. This machine is in excellent condition, fast and ready to go.

Specification      
X-Axis Travel      19.7"
Y-Axis Travel      15.7"
Z-Axis Travel      11.8"
Riser for column      150mm (5.91")
Distance Between Table Top And Spindle Nose      7.1" - 18.9" Plus riser
Table Size      24" x 16"
Work Area      23.6' x 15.7"
Max. spindle speed      16000 RPM
Table max. Load Capacity      661 lbs
Speed During Tapping      6,000 RPM
Spindle Taper      BT#30
Rapid Traverse Rate (X,Y & Z)      1,969 IPM
Tool Storage Capacity      14 ATC
Max. Tool Length      9.8"
Max. Tool Diameter      1.2"
Max. Tool Weight      6.6 lbs
Tool To Tool Change Time      0.9 Sec.
Chip To Chip      1.6 Sec.
Cut To Cut      1.4 Sec.
Machine Weight      5,291 lbs

Equipped With:
2013 Lehmann EA-510 (Swiss) Two 2 Axis Rotary/Trunion table model :T1-507510.LRvarioX1
Includes:
- Spindle ID-HSK A63 / OD-70mm
- Run-out < 6Š
- Load capacity to spindle 175lbs
- Rotary - Up to 66RPM // 0-90€¹ <0.5sec, incl. clamp
- Tilt - Up to 60RPM // 0-90€¹ <0.6sec, incl. clamp
- Including DDF-507-04 rotary union, 4 flutes, air or oil
- Brake clamping torque
- Rotary axis 220 ft.lbs
- Tilt axis 810 ft.lbs.
- Standard accuracy:
- Tilt-Axis - positioning accuracy ( /-17h)
- Rotary-Axis - positioning accuracy ( /- 20h)
- Repetition accuracy ( /- 5h)
- Gear ratio 45:1, total ratio 90:1
- Tilting range 180o  /-10o
- Complete unit is fully sealed to IP 67 specification
- Reference point switch
- Motor mounting left-left,
- Sanyo is motor installed (tilt or rotary axis)
- Standard cable set, including plugs fit to TC-S2D
machine
- Weight approx: 190lb
Original new cost of this trunion table was $44,600.

Additional hydraulic clamping system for work piece is included.
Automatic front door open/close
Coolant system

Control: Brothers B00
Includes;
NC Language, Conversation (Changed By Parameter)
Absolute/ Incremental
Inch/Metric
Control; Brothers B00
NC Language, Conversation (Changed By Parameter)
Absolute/ Incremental
Inch/Metric
Rotational Transformation
Corner C / Corner R
Synchronized Tap
Coordinate System Settings
Dry Run
Restart
Backlash Compensation
Pitch Error Compensation
Rapid Traverse Over ride
Cutting Feed Over Ride
Alarm History
Status log
Machine lock
Computer Remote
High Accuracy Mode
Tool Length Measurement
Tool Life Management/Spare Tool
Back ground Editing
Graphic Display
Sub Program
Expanded Work piece Coordinate System
Helical/ Conical Interpolation
Scaling
Mirror Image
Menu Programming
Program Compensation
Tool Length Compensation
Cutting Compensation
Operation Program (Conv.)
Schedule Program (Conv.)
Auto Tool Selection (Conv.)
Auto Cutting Condition Setting (Conv.)
Auto Tool Length Compensation Setting (Conv.)
Auto Calculation of Unknown Number input (Conv.)
Machining Order Control (Conv.)
Macro Function
Auto Power Off
Servo Motor Standby Mode
Chip Shower Delay
Auto Coolant Off
Auto Work Light Off
Local Coordinate System
One-Way Positioning
Operation in Taper Mode
Heat Compensation System 11 (X, Y & Z)
Tool Washing Filter With Filter Clogging Detection
Tap Return FunctionCNC-B00
Approx. 10 Mbytes
USB Memory Interface
RS232
Ethernet
1,024 Registerable Programs
Includes;
Expanded Work piece Coordinate System
Helical/ Conical Interpolation
Scaling
Mirror Image
Menu Programming
Program Compensation
Tool Length Compensation
Cutting Compensation
Operation Program (Conv.)
Schedule Program (Conv.)
Auto Tool Selection (Conv.)
Auto Cutting Condition Setting (Conv.)
Auto Tool Length Compensation Setting (Conv.)
Auto Calculation of Unknown Number input (Conv.)
Machining Order Control (Conv.)
Macro Function
Auto Power Off
Servo Motor Standby Mode
Chip Shower Delay
Auto Coolant Off
Auto Work Light Off
Local Coordinate System
One-Way Positioning
Operation in Taper Mode
Heat Compensation System 11 (X, Y & Z)
Tool Washing Filter With Filter Clogging Detection
Tap Return FunctionCNC-B00
CNC-B00
Approx. 10 Mbytes
USB Memory Interface
RS232
Ethernet
1,024 Registerable Programs