Advanced Search
Surplus Record logo

DUST COLLECTORS

4000/5500 cfm Aget, aluminum or brass/copper chip & mist collector, 7.5 HP

Request a Quote
More Photos & Detailed Specs
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable

General Specifications


Cubic Feet Per Minute: 4000 CFM
Manufacturer: Aget
Baghouse:
Stock #: 51558
Price: Request a Price

Dealer Information
Bass Machinery LLC
2100 Hendon St
Toledo, OH 43606-4543

Contact: Sales
Tel: 419-243-2277
Fax: 330-299-0520
Email: sales@bassmachinery.com
  
Gold Level Dealer Since 2009
Website: www.bassmachinery.com

View our Equipment Listings

Detailed Product Description


4,000 / 5,500 CFM AGET Model 30SN90-PL-SP
Aluminum or Brass / Copper Chip and Mist Collector

AGE: 2015

This Is A Combination Chip-Mist 2-Stage Collection System,
Originally Installed On An Aluminum Extrusion Re-Cut Saw,
But Can Also Be Used For Brass Or Copper By Increasing The
Air Velocity By Installing An Inlet Diameter Reducer Per
Original Manufactuer

STAGE # 1:

MODEL NUMBER: 30SN90

SPECIFICATIONS:

Filter Type: Pull-Through Type Cyclone For Removing 98% Of
The Course Debris, Particles And Course Dust
From The Exhaust Stream

Airflow, Nominal: Approx. 4,000 CFM Generated By A
7-1/2 HP Top Mounted, Pull-Through Type
Blower With A Spark Resistant, Direct
Drive, Aluminum Fan Wheel

Inlet: 10" to 12" For Aluminum
6" to 7" For Brass/Copper With A Reducer
Installed To Increase Air Flow
To 5,500 CFM

Est. Static Pressure: 11.0" to 3.0"
Connections: K & B Rolled Edge Fit-Up Option

EQUIPPED WITH:

2 HP, Six Vane Model RV6-10 Blower Mounted To The Bottom
Of The Cyclone Which Acts As An Air Lock and Metering
Device Allowing Chips To Fall Through A 12" Outlet Into
The Receiving Gaylord Below

STAGE # 2:

MODEL NUMBER: VC-51

SPECIFICATIONS:

Set-Up For Mist Collection While Allowing The Remaining 2%
Fines To Fall Down Into A 55 Gallon Drum With An Air Tight
Positive Drum Cover

Filter Type: Mistkop (Mist Removal)
Est. Static Pressure: Up to 9.6"

NOTES:

Entire System Is Powder Coated For Either Indoor Or Outdoor
Installation And The 7-1/2 HP Blower Motor Is Fitted With A
Weather Cap

Entire System Is Mounted Onto A Lift Stand To Accommodate
The Gaylord and Drum

CURRENT REPLACEMENT COST PER MANUFACTURER:

Blower and Cyclone: $ 5,000
2 HP Rotary Vane: $ 4,225
Mist Collector: $ 1,495
Mounting Stand: $ 2,145
Total: $12,865

OVERALL DIMENSIONS: 71" x 108" x 195"
WEIGHT: 1,500 Lbs.
CONDITION: Excellent