Advanced Search
Surplus Record logo

IRONWORKERS

5" x 5" x 1/2" Marvel Spartan #IW66D, hydraulic, simultaneous dual station operation, 66 ton

Request a Quote
More Photos & Detailed Specs
Share
Click for video
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable
Image unavailable Image unavailable

General Specifications


Angle Capacity" L: 5.00" L
Angle Capacity" W: 5.00" W
Capacity: .500"
Manufacturer: Marvel
Model: IW66D
Ton: 66
Stock #: 1348
Price: Request a Price

Dealer Information
Naab Sales Corporation
9151 International Pkwy Ste.1
New Hope, MN 55428

Contact: J.Van Heuveln
Tel: 952-933-6755
Fax: 952-933-7229
Email: john@naabsales.com
  
Gold Level Dealer Since 2007
Website: www.naabmachinery.com/

View our Equipment Listings

Detailed Product Description


Spartan Marvel 66 Ton Hyd Ironworker
With: Simultaneous Dual Station Operation
Model: IW66D
General Specifications: (All specifications must be verified by buyer)
Make: Marvel Spartan
Model: IW66D
Serial #  IW66D-162
PUNCHING
Punch Pressure:  66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper:  For fast and
easy setup.
Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling:  1-1/2” in 3/8” material.
Large Tooling:  2” in 5/16” material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling:  6” in 3/32” material.
Maximum Channel Flange:  7”.
Throat Depth:  12” (D); 20” (DX).
Stroke Length:  3-15/16”.
Cycles per Minute in 3/4”:  30.
Punching Station Work Height:  39-3/4”.
FLAT BAR SHEARING
Flat Bar Shear Capacity:  14” in 9/16”.
Maximum Width x Thickness:  10” in 3/4”.
Lower Blade:  Four (4) usable edges.
Support Table:  Includes guides for accurate positioning and
     indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down:  Holds work piece securely in position
             when shearing.
Upper Shear Blade:  Provides for minimum distortion.  Two (2)
                                    usable edges.
Blade Length:  14-1/4”.
Angle Flange Trim:  4”.
Flat Bar Shear Work Height:  36”.
ANGLE SHEARING
Maximum Capacity – 90 degrees:  5” x 5” x 1/2”.
Maximum Capacity – 45 degrees:  2-1/2” x 2-1/2” x 5/16”.
Shearing with no material loss and minimum deformity.
Shear Blades:  Four (4) usable edges.
Angle Shear Work Height:  43-3/4”.
BAR SHEARING
Round Bar Max. Capacity:  1-1/2”.
Square Bar Max. Capacity:  1-1/2” x 1-1/2”.
Five Cavity Round and Square Bar Shear Sizes: 
             Round    1/2”, 1”, 1-1/2”
             Square   3/4”, 1-1/2”.
Channel Shear Max. (optional):  5”.
I-Beam Shear Max. (optional):   5”.
Bar Shear Work Height:  48”.
NOTCHING
Rectangular Notcher:  2” x 3-1/2” in 5/16” material.
Electrical Interlock Safety Guard
Gauge Table with Stops:  For precise positioning.
Notcher Work Height:  36-1/4”.
OTHER STANDARD EQUIPMENT
 
Magnetic Base Work Light
Adjustable Electric Back Gauge (36”)
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals (2)
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Net Weight: (D) 3,969 lbs.
Machine Dimensions: (D) 68” L X31” W X67” H;                               
PUNCHING
Punch Pressure:  66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper:  For fast and
easy setup.
Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling:  1-1/2” in 3/8” material.
CPD Series:  26 punch, 62 die.
Large Tooling:  2” in 5/16” material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling:  6” in 3/32” material.
Maximum Channel Flange:  7”.
Throat Depth:  12” (D); 20” (DX).
Stroke Length:  3-15/16”.
Cycles per Minute in 3/4”:  30.
Punching Station Work Height:  39-3/4”.
FLAT BAR SHEARING
Flat Bar Shear Capacity:  14” in 9/16”.
Maximum Width x Thickness:  10” in 3/4”.
Lower Blade:  Four (4) usable edges.
Support Table:  Includes guides for accurate positioning and
     indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down:  Holds work piece securely in position
             when shearing.
Upper Shear Blade:  Provides for minimum distortion.  Two (2)
                                    usable edges.
Blade Length:  14-1/4”.
Angle Flange Trim:  4”.
Flat Bar Shear Work Height:  36”.
ANGLE SHEARING
Maximum Capacity – 90 degrees:  5” x 5” x 1/2”.
Maximum Capacity – 45 degrees:  2-1/2” x 2-1/2” x 5/16”.
Shearing with no material loss and minimum deformity.
Shear Blades:  Four (4) usable edges.
Angle Shear Work Height:  43-3/4”.
BAR SHEARING
Round Bar Max. Capacity:  1-1/2”.
Square Bar Max. Capacity:  1-1/2” x 1-1/2”.
Five Cavity Round and Square Bar Shear Sizes: 
             Round    1/2”, 1”, 1-1/2”
             Square   3/4”, 1-1/2”.
Channel Shear Max. (optional):  5”.
I-Beam Shear Max. (optional):   5”.
Bar Shear Work Height:  48”.
NOTCHING
Rectangular Notcher:  2” x 3-1/2” in 5/16” material.
Electrical Interlock Safety Guard
Gauge Table with Stops:  For precise positioning.
Notcher Work Height:  36-1/4”.
OTHER STANDARD EQUIPMENT
Magnetic Base Work Light
Adjustable Electric Back Gauge (36”)
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals (2)
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Net Weight: (D) 3,969 lbs
Machine Dimensions: (D) 68” L X31” W X67” H 
Electrics: 7-1/2 HP 230V/3ph
Equipped with: Many Extra Punches and Dies,
2  Work Stations independently operated.
Misc tooling as pictured.