Advanced Search
Surplus Record logo

CNC MACHINERY & EQUIPMENT
GEAR GENERATORS, CNC

Gleason #116CNC, Hypoid spiral bevel, 18" pitch diameter, 9" max cone dist, 2 DP, factory rebuilt/recontrolled 1994, #28600

Request a Quote
More Photos & Detailed Specs
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable
Image unavailable Image unavailable

General Specifications


Manufacturer: Gleason
Model: 116CNC
Stock #: 28600
Price: Request a Price

Dealer Information


Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com

Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


#116CNC GLEASON HYPOID SPIRAL BEVEL
GEAR GENERATOR
FACTORY REBUILT/RECONTROLLED 1994, SERIAL NO. 31224,
MODEL 116CNC

SUITABLE FOR THE CUTTING (“JOBBING") OF HYPOID AND SPIRAL BEVEL
GEARS AND PINIONS UP TO 18" (460MM) PITCH DIAMETER
AT 10:1 RATIO, 9" (228.6MM) MAXIMUM CONE DISTANCE, AND A
MAXIMUM OF 2 DP (MODULE 12.7)

EQUIPMENT / FEATURES:
FANUC SERIES O-GC COMPUTER NUMERICAL CONTROL (CNC)
WITH FANUC SERVO-MOTORS, FOR AUTOMATIC SET-UP AND CONTROL
OF THREE (3) AXES; WORK SPINDLE, CRADLE AXIS, SLIDING BASE
SECURITY KEY ON CNC TO ALLOW FOR CONTROL OF SETUP
CYCLE FAULT MONITORING
ELECTRONIC INDEX
HYDRAULIC CLAMPS AND SONY DIGITAL READOUTS ON (6) MACHINE AXES.
CUTTER SPINDLE ROTATION ANGLE (TILT) - - SWIVEL ANGLE
ECCENTRIC ANGLE - - VERTICAL OFFSET
MACHINE CENTER TO BACK (WORK-HEAD SETTING) - ROOT ANGLE
VARIABLE SPEED AC CUTTER MOTOR
MACHINE MOUNTED, AIR CONDITIONED ELECTRICAL ENCLOSURE.
(CONTROL PANEL LOCATED BY OPERATOR’S POSITION)
TOTALLY ENCLOSED GUARD PACKAGE WITH POWERED ACCESS DOOR
ARRANGEMENT “COMPLETING" METHOD
ARRANGEMENT FOR “MODIFIED-ROLL" CUTTING METHOD
ELECTRONIC STOCK DIVIDER (TOUCH TRIGGER TYPE)
HYDRAULIC WORK-PIECE CHUCK WITH DRAW-ROD
CUTTER TRANSFER CAPABILITY
HYDRAULICALLY ACTIVATED WORK-SPINDLE PISTON BRAKE
HYDRAULICALLY ACTIVATED CRADLE BRAKE
SELF-CONTAINED CHIP REMOVAL SYSTEM W/CHIP CONVEYOR
WORK AREA LIGHTING
PRODUCTION AND SHARPEN CUTTER COUNT DISPLAY
POWER FORCED LUBRICATION TO ALL WORKING ELEMENTS
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
(PRESENTLY ARRANGED FOR 3-PHASE, 460 VOLT, 60 HZ OPERATION)

PRINCIPAL SPECIFICATIONS:
DIAMETRAL PITCH (COARSEST)       2 DP (12.7-MODULE)
MAXIMUM FULL DEPTH       1" (25.4MM)
CONE DISTANCE, MAXIMUM (30-DEGREE SPRIAL ANGLE &
12" DIAMETER CUTTER       9" (230MM)
MAXIMUM PITCH ANGLE (SHAFTS AT 90-DEGREES)       84 DEGREES 18’
MINIMUM PITCH ANGLE (SHAFTS AT 90-DEGREES)       5 DEGREES 42’
EXTREME RATIO (SHAFTS AT 90-DEGREES)       10 TO 1
MINIMUM RATIO FOR PINIONS TO OPERATE WITH "FORMATE" GEARS       TO 1
MAXIMUM FACE WIDTH (DEPENDING ON CUTTER)       2.75" (78MM)
MAX./MIN. NUMBER OF TEETH       175 TO 5
MAXIMUM GEAR PITCH DIAMETER: (AT 30-DEGREE SPIRAL ANGLE)
10 TO 1 RATIO       18" (460MM)
2 TO 1 RATIO       16" (406MM)
1 TO 1 RATIO       12.75" (324MM)
WORK SPINDLE TAPER BORE DIA.(LARGE END)       3.9" (100MM)
TAPER (PER FT.)      39/64" (1:20)
DEPTH OF TAPER       6" (150MM)
DIAMETER OF HOLE THROUGH SPINDLE       3.06" (78MM)
DIAMETER OF SPINDLE NOSE       5.5" (140MM)
CUTTER DIAMETERS UTILIZED       6",7",9",12" (150,190,230,305MM)
WORK-HEAD MAXIMUM OFFSET ABOVE CENTER       4.5" (114MM)
WORK-HEAD MAXIMUM OFFSET BELOW CENTER       4.5" (114MM)
MAXIMUM DISTANCE FROM MACHINE CENTER TO NOSE OF SPINDLE      13.5" (343MM)
MINIMUM DISTANCE FROM MACHINE CENTER TO NOSE OF SPINDLE       2.5" (63MM)
CUTTER SPEEDS       20 TO 115 RPM
FEEDS (SECONDS PER TOOTH)      9 TO 80 SECONDS
( ELECTRICAL EQUIPMENT / MOTORS )
( CONTINUOUS POWER )      
CUTTER SPINDLE      5 HP (3.7KW)      
CRADLE      4.7 HP (3.5KW)      
WORKSPINDLE      1.3 HP (1.0KW)      
SLIDING BASE      1.2 HP (0.9 KW)      
COOLANT      2.0 HP (1.5 KW)      
HYDRAULIC      1.5 HP (1.2 KW)       
CHIP ELEVATOR      .5 HP (.04 KW)      
( TORQUE )
CUTTER SPINDLE      416 IN LB (480 KG.CM)      
CRADLE      200 IN LB (230 KG.CM)      
WORKSPINDLE      52 IN LB ( 60 KG.CM)      
SLIDING BASE      52 IN LB ( 60 KG.CM)      
COOLANT      460 V 60 CYCLE GUSHER 360 RPM AC INDUCTION 3GPM
HYDRAULIC      460 V 60 CYCLE DELCO 1200 RPM AC INDUCTION OIL GEAR PUMP 6.6GPM
CHIP ELEVATOR      230 V 60 CYCLE 1500 RPM
CUTTER SPINDLE      FANUC 8P VARIABLE AC
CRADLE      FANUC 20S 2000 RPM AC SERVO
WORKSPINDLE      FANUC 5S 3000 RPM AC SERVO
SLIDING BASE      FANUC 5S 2000 RPM AC SERVO
( MACHINE DIMENSIONS / WEIGHT )
OVERALL MACHINE LENGTH       129" (3270MM)
OVERALL MACHINE WIDTH       94" (2388MM)
OVERALL MACHINE HEIGHT       85" (2160MM)
MACHINE APPROX. NET WEIGHT       24,000 LBS.(10,909 KGS)