Advanced Search
Surplus Record logo

GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #641 " G-Plete" Hypoid spiral bevel, 16" diam, 2.6" face width, 2 DP, set of change gears, #28602

Request a Quote
More Photos & Detailed Specs
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable
Image unavailable Image unavailable

General Specifications


Manufacturer: Gleason
Model: 641
Stock #: 28602
Price: Request a Price

Dealer Information


Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com

Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


MODEL NO. 641 GLEASON “G-PLETE" HYPOID SPIRAL BEVEL
GEAR GENERATING MACHINE
SERIAL NO. 763381 (NEW IN 1977)

SUITABLE FOR THE “COMPLETING" OF SPIRAL BEVEL, HYPOID,
AND ZEROL BEVEL GEARS AND PINIONS UP TO 16" (406.4MM)
DIAMETER, 2.6" (66MM) FACE-WIDTH, WITH 2 DP (MODULE 12.7) CUTTING CAPABILITY

FEATURES / EQUIPMENT:
HYDRAULIC CHUCKING ATTACHMENT LESS/DRAW-ROD & NUT
ARRANGEMENT FOR FORMATE, INCLUDING CONTROLS FOR COMPLETING,
(ROUGHING & FINISHING)
PLUNGE FEED MECHANISM
VARIABLE RATE-OF-ROLL ARRANGEMENT
DOUBLE-ROLL ARRANGEMENT
RATIO CONTROL MECHANISM
ONE SINGLE SET-UP OF CHANGE GEARS
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
(PRESENTLY ARRANGED FOR 3-PHASE, 460 VOLT, 60 HZ OPERATION)
COOLANT SYSTEM, PUMP TANK & PIPING
AUTOMATIC CHIP SEPARATOR, INCLUDING AUTOMATIC CHIP WIPER SYSTEM
AND AUGER-TYPE CHIP CONVEYOR

PRINCIPAL SPECIFICATIONS:
EXTREME RATIO       10:1
ROOT ANGLE RANGE       -8° TO 90°
GEAR DIAMETER – MAXIMUM       16.000" (406.40MM)
EXAMPLES OF MAX. GEAR PITCH DIAMETERS WITH 35"
GEAR SPIRAL ANGLE AND MAX. CUTTER DIAMETER ( )
AT THE FOLLOWING RATIOS : (USING 12" CUTTERS)
1 X 1       13.500" (342.90MM)
2 X 1       16.000" (406.40MM)
5 X 1       16.000" (406.40MM)
MAXIMUM RADIAL SETTING      6.983" (177.40MM)
DIAMETRAL PITCH – COARSEST       2.0 DP (12.70 MOD)
FULL DEPTH – MAXIMUM      1.000" (25.40MM)
FACE WIDTH – MAXIMUM       2.600" (66.00MM)
TAPER PER FOOT      39/64" (15.48MM)
DEPTH OF TAPER      6" (152.40MM)
INDEX RANGE       5 TO 10 INCLUSIVE
WORK-SPINDLE DIAMETER OF TAPER HOLE AT LARGE END       3-29/32" (99.22MM)
DIAMETER OF HOLE THROUGH SPINDLE       3.0625" (77.79MM)
CUTTER DIAMETER(S) UTILIZED       2.75", 3.75", 4.5", 6", 7.5", 9",10.5",12" (100, 125, 160, 200, 250 AND 300MM)      
CUTTER SPEEDS       15 – 250 RPM
CYCLE TIME INFINITELY VARIABLE FROM       4.5 SECONDS/TOOTH – MINIMUM
WORKHEAD SETTINGS
OFFSET ABOVE CENTRE - MAXIMUM      2.25" (57.15MM)
OFFSET BELOW CENTRE – MAXIMUM       2.25" (57.15MM)
MACHINE CENTRE TO NOSE OF SPINDLE - MAXIMUM       14.50" (368.30MM)
ELECTRICAL EQUIPMENT       60 HZ (50 HZ)
CUTTER DRIVE MOTOR (10/5 HP)       1800/900 RPM (1500/750 RPM)
HYDRAULIC MOTOR (3 HP)       1200 RPM
HYDRAULIC MOTOR (5 HP)      1500 RPM
COOLANT MOTOR (1.5 HP)       900 RPM      
COOLANT MOTOR (2 HP)      1000 RPM
D.C. GENERATING DRIVE MOTOR (6 HP)       1200 RPM
DIMENSIONS / WEIGHT:      
FLOOR SPACE (INCLUSIVE OF HYDRAULIC UNIT,      
ELECTRICAL PANEL & CHIP REMOVAL SYSTEM)       131" X 85" (333 X 216CM)
HEIGHT       83" (211CM)
NET WEIGHT       27,100 LBS (12,292 KG)