Advanced Search
Surplus Record logo


32" x .125" Minster #MEF5-32, Servo feeder, remanu feed head, new A-B controls, 1999

Request a Quote
More Photos & Detailed Specs
Photo Unavailable

General Specifications

Width: 32"
Capacity: .125"
Manufacturer: Minster
Model: MEF5-32
Stock #: 100299A
Price: Request a Price

Dealer Information

Nidec Press & Automation
240 W 5th Street
Minster, OH 45865

Contact: Rich Ruck
Tel: 860-919-5436
Gold Level Dealer Since 2013

View our Equipment Listings

Detailed Product Description

Remanufactured Minster MEF5-32 Single Roll Electric Feed
New 1999 – Remanufactured 2018
Nidec Press & Automation Stock #100299A

32.00 in. Maximum Material Width (813 mm)
0.250 in. Maximum Stock Thickness @ 16.00 in. Width
(6.3mm @ 406 mm Wide)
0.125 in. Maximum Stock Thickness @ 32.00 in. Width
(3.18 mm @813 mm)
0.020 in. Minimum Thickness (0.5 mm)
0.470 in. Maximum Roll Opening (11.9 mm)
5.40 in. Feed Roll Diameter (2137 mm)
64.50 in. Material Pass Line ± 4.50 in. Over Floor
1638 ± 114 mm)
99.99 in. Maximum Programed Feed Length (2540 mm)

ï · Motorized Pass Line Adjustment
ï · Pass Line Mounting Clamps
ï · End of Stock Sensor
ï · Grease Lubrication System

Main Feed Head Rebuild
ï · Disassemble entire feed head and drive train
ï · Inspect all machine components for integrity, wear and damage
Components to include:
ï § Feed rolls and journals
ï § Side plates and gear housing
ï § Upper roll lift assembly
ï § Drive train components (gears, belts,pulleys, sheaves)
ï § Lubrication points and manifold
ï · Clean, sand, prime and paint appropriate components
ï · Grind and apply matte chrome finish to upper / lower feed rolls
ï · Rebuild pneumatic cylinders (Roll lift, pilot and antibackup)
ï · Install new bearings, races and bushings
ï · Re-assemble entire feed head
ï · Install drive train and verify alignment
ï · Time upper feed roll adjustment for parallelism
ï · Install new solenoid control valve(s)
ï · Install new pneumatic components (fittings, quick exhausts, flow controls)
ï · Install new lubrication fittings, hosing and accessories
ï · Rebuild cabinet pass line elevation system
ï · Rebuild motorized pass line adjustment as required
ï · Clean, sand and paint entire machine to color of choice
ï · New OEM safety warning labels

Complete new servo drive and control package*
ï · 425 in./lbs. motor (48 Nm)
ï · 480 VAC Primary Voltage
ï · 999.999 in. Maximum Feed Length (25,400 mm)
ï · Within 0.003 in. Material Feed Accuracy (0.076 mm)
ï · Allen Bradley KINETIX AC Servo Drive
ï · Allen Bradley CompactLogix PLC
ï · Allen Bradley AC Servo motor
ï · Integrated holding brake on motor
ï · Touchscreen HMI operator interface
ï · Servo feed software optimized for press feeding applications
ï · Motor Power / Encoder cable(s) 10M
ï · Ethernet IP communication
ï · SD Card Drive data storage and recovery
ï · USB HMI data storage and recovery
ï · Emergency stop button with integrated safety relay
ï · Free standing sloped front electrical enclosure
ï · Fused safety disconnect


ï · Safe Torque Off (Hard Wired)
ï · 24 Volt VDC based control system
ï · 100 Part recipe storage
ï · Automatic, manual and setup modes
ï · Programmable per part recipe
Feed to length
Feed velocity
Feed acceleration
Batch count
ï · Feed length micro adjustment
ï · Manual mode:
Jog continuous
ï · Setup Mode:
Jog to part length
Single feed to part length
ï · Remote jog pendant with 10’ curly cord and mounting holster
ï · Pilot pin release
ï · Feed complete output
ï · Fault history
ï ·(2) 24-volt DC capable dry contacts from the press rotary cam switch will be required. One for automatic feed initiate, and one for pilot pin release.
ï · Full digital operator’s manuals and electrical