MODEL: PulsAir PA15-0101
SERIAL NUMBER: 7001-PA15-0101 Year: 2006
"The Pulsair model press offers a manually set adjustable stroke from .25" to 3" in .006" increments."
Note: Press originally manufactured in March of 2006 exhibited at the Metalform Show in Nashville, TN. Purchased by John A. Logan College for use in their stamping & technology fields. Primarily used for testing of dies built by students.
Holding Tonnage @ 100 psi/.5" - 1" Stroke: 15 Tons
Holding Tonnage @ 100 psi/2" Stroke: 14 Tons
Holding Tonnage @ 100 psi/3" Stroke: 13 Tons
Impact Tonnage: 2 x Holding Tonnage
Die Open Height: 14.50"
Bed Size: 35" x 25"
Usable Die Space Area: 25" x 19.7"
Distance Between Guide Pins: 25" x 15"
Standard Strokes Per Minute @ 3" Stroke: 90
Standard Strokes Per Minute @ 2" Stroke: 110
Standard Strokes Per Minute @ 1" Stroke: 220
Standard Strokes Per Minute @ 1/2" Stroke: 500
Floor To Top Of Bed With Mounts: 33-1/4"
Input Voltage: 110 Volt, 1 Phase
Control Pedestal Including: Two Hand Run/Cycle Buttons, Off/Manual/Continuous Selector Switch, Top Stop Button, Emergency Stop Button, Strokes Per Minute & Batch Counter
Polycarbonate Die Area Guarding w/Access Door On Front and Rear
Adjustable Stroke Mechanisms
Tie Rod Style Precision Guide Posts
Air Surge Tank (13 Gallon)
(4) Set-up Blocks
Set Of 4 Vibration Mounts
Operation and Instruction Manual
Approximate Weight: 8000 Lbs.
F.O.B. Cincinnati, Ohio
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER
About the Dealer
C.W. Wood Machinery Inc., experience the advantage of working with C.W. Wood, with over 2000 new and used machines in stock. Machines can be inspected under power and most are sold with a 30 day return privilege.