Advanced Search
Surplus Record logo

MEASURING MACHINES (Including Coordinate Measuring Machines CMM's)

Fanamation #1004040-PH10M/TP7, gantry CMM, installed, calibrated, 1 year warranty

Request a Quote
Share

General Specifications


Manufacturer: Fanamation
Model: 1004040-PH10M/TP7
Stock #:
Price: Request a Price

Dealer Information
Intelligent Measurement, Inc.
16115 Wyandotte St
Van Nuys, CA 91406

Contact: Farshad Farzan
Tel: 818-901-6787
Email: farshad@intelmeas.com
  
Gold Level Dealer Since 2018
Website: intelmeas.com/imi

View our Equipment Listings

Detailed Product Description


FANAMATION 1004040 GANTRY Coordinate Measuring Machine

The Granite structure provides support for dual axis Granite guide-ways.
The Granite guide-ways provide air-bearing surface and the mounting areas for the linear motor assemblies as well as the Linear scale for the movement of the robot assembly in the Y direction The Base is supported by steel stands, and for best performance, vibration isolation pads are between the base and the stands.
The robot assembly is the moving structure that rides over the Granite guide-ways.
A Ceramic Beam (X Beam) is mounted via Bolt and Epoxy to two carriage plates.(Y Carriage, and W carriage).
The Y,W Carriages house the air-bearings required for the motion along the Y axis.
The X Beam provides air-bearing surface and the mounting areas for the linear motor assemblies as well as the Linear scale for the movement of the robot assembly in the X direction The Saddle assembly is the moving structure that rides over the Ceramic X beam.
The Saddle houses the Z axis Ceramic beam.
The Z axis provides air-bearing surface and the mounting areas for the linear motor assemblies as well as the Linear scale for the movement of the robot assembly in the Z direction ( Z axis).
The system will utilize the following components:Magnet Assemblies ,Coil Assemblies for X, Y, Z and W axis.
The Linear Scales are mounted over the surface of the guide-ways and provide Standard output signals Resolution of 1 Micron.

The machine control cabinet provides room for a number of rack-mount enclosures.
This unit will house the Servo Amplifiers and all other computer and electronics .

AXIOM Measuring Software using DMIS.
AXIOM is fully compatible with Origin International CheckMate for SolidWorks Probe Head : PH10M motorized probe head Touch Probe: TP7 Installation and Laser Calibration and Training provided.


Measuring Range
( Y axis ) 100
( X axis ) 40
( Z axis) 40
Resolution 1 micron
Linear scale type Glass
Compensated Vol. Accuracy Total Bandwidth 15 micron
Compensated Axial Accuracy
( X axis) 8 micron
( Y axis ) 8 micron
( Z axis) 8 micron
Repeatability Volumetric 4 micron
Maximum Drive Speed Point to Point 250 mm/sec
Maximum Drive Accel Point to Point 500 mm/sec2
Probing speed 50 mm/sec
Overall Dimensions LxWxH 64 x 120 x 135
Machine weight 24000 lbs.
Power Requirements 208 30A or 220 25A
AIR Requirements 95 PSI, 20 SCFM