Advanced Search
Surplus Record logo

GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #14 Coniflex, hyd work chucking cylinder w/draw-in bar & nuts, 24" diameter, 3.5" face width, assort. of gears, #28472

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Manufacturer: Gleason
Model: -14
Stock #: 28472
Price: Request a Price

Dealer Information
Mohawk Machinery Inc logo
Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com
  
Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


MODEL NO. 14 (429) GLEASON "CONIFLEX" STRAIGHT BEVEL
GEAR GENERATOR, COMBINATION ROUGHER/FINISHER
SERIAL NO. 752710 (NEW IN 1975)

SUITABLE FOR THE CUTTING OF STRAIGHT BEVEL GEARS AND PINIONS UP TO
24″ (630MM) DIAMETER, 3.5″ (89MM) FACE-WIDTH, AND 3 DP
(MODULE 8.5)

FEATURES / EQUIPMENT:
HYDRAULIC WORK CHUCKING CYLINDER, W/DRAW-IN BAR & NUTS
STOCK DIVIDING GAUGE
ONE (1) SET STANDARD TOOL-HOLDERS
CUTTER LENGTH GAUGE
ONE (1) SET EXTENDED TOOL-HOLDERS
ROUGHING YOKE & BUSHING
GOOD ASSORTMENT OF CHANGE GEARS WITH TOOL & GEAR CABINET
INDEX HAND CRANK
3 HP, 3PH, 50/60 CY, 220/440 V, 1740 RPM MAIN DRIVE MOTOR
1.5 HP, 3PH, 50/60 CY, 220/440 V, 1140 RPM HYDRUALIC PUMP-MOTOR
O.5 HP, 3PH, 50/60 CY, 220/440 V, 3450 RPM COOLANT PUMP MOTOR
GUARDS, COVERS
COMPLETE ELECTRICAL CONTROLS

PRINCIPAL SPECIFICATIONS:
MAXIMUM CONE DISTANCE (2.75"-3.5" FACE)       12" (305MM)
MAXIMUM CONE DISTANCE (1" FACE)       11-1/8"(282.5MM)
MINIMUM CONE DISTANCE       0" (0MM)
MAXIMUM PITCH ANGLE (ANGULAR GEARS)       105 DEGREES
MAXIMUM PITCH ANGLE (90-DEGREE SHAFTS) 84 DEGREES/18MIN.
MINIMUM PITCH ANGLE       5 DEGREES/42MIN.
MAXIMUM RATIO       10/1
MAXIMUM PITCH DIAMETER       (SEE TABLE)
MAXIMUM FACE WIDTH       3.5" (89MM)
MAXIMUM STROKE LENGTH      .5"-4.5" (127-114.3MM)
INDEX RANGE       5-100
INCLUSIVE ( UP TO 200)(MORE TEETH ARE RECOMMENDED FOR BETTER DESIGN)
MAXIMUM PITCH       3 DP (NOMINAL)(8.5 MODULE)
DIAMETER OF HOLE IN WORK SPINDLE (LARGE END)       3.906"(99.2MM)
SPINDLE TAPER PER FOOT      .609"(15.5MM)
DEPTH OF SPINDLE TAPER       6"(152.4MM)
DIAMETER OF SPINDLE THRU-HOLE       3.063″(77.7MM)
SPINDLE NOSE TO CENTER LINE       2.5 TO 15"(63.5 TO 381MM)
THIRTEEN (13) TOOL SPEEDS IN
STROKES PER MIN.        64 TO 495
SIXTEEN (16) FEEDS       FROM 10 SECONDS
TO 2 MINUTES, 11 SECONDS PER TOOTH
FLOOR SPACE REQUIRED FOR MACHINE       76" X 56" (1930X1420MM)
MACHINE NET WEIGHT, (APPROX.)       13,600 LBS. (6,863 KG)