Advanced Search
Surplus Record logo

GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #14 Coniflex, 24" diameter, 3.5" face width, 3 DP, assortment of change gears w/cabinet, #28264

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Manufacturer: Gleason
Model: -14
Stock #: 28264
Price: Request a Price

Dealer Information
Mohawk Machinery Inc logo
Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com
  
Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


#14 GLEASON "CONIFLEX" STRAIGHT BEVEL GEAR GENERATOR
COMBINATION ROUGHER/FINISHER
SERIAL NO. 32038      
SUITABLE FOR THE CUTTING OF STRAIGHT BEVEL GEARS AND PINIONS UP TO
24″ (630MM) DIAMETER, 3.5″ (89MM) FACE-WIDTH, AND 3 DP (MODULE 8.5)

FEATURES / EQUIPMENT:
HYDRAULIC WORK CHUCKING CYLINDER, W/DRAW IN BAR & NUTS
STOCK DIVIDING GAUGE
UPPER & LOWER TOOL SETTING GAUGE W/PROOF BLOCK
CUTTER LENGTH GAUGE
ONE (1) SET EXTENDED TOOL-HOLDERS
GOOD ASSORTMENT OF CHANGE GEARS WITH TOOL & GEAR CABINET
INDEX HAND CRANK
ROUGHING YOKE & BUSHING
3 HP, 3PH, 50/60 CY, 220/440 V, 1740 RPM MAIN DRIVE MOTOR
1.5 HP, 3PH, 50/60 CY, 220/440 V, 1140 RPM HYDRAULIC PUMP MOTOR
O.5 HP, 3PH, 50/60 CY, 220/440 V, 3450 RPM COOLANT PUMP MOTOR
GUARDS, COVERS
COMPLETE ELECTRICAL CONTROLS

PRINCIPAL SPECIFICATIONS:
MAXIMUM CONE DISTANCE 2.75" 3.5" FACE 12" 305
MAXIMUM CONE DISTANCE 1" FACE 11 1/8" 282.5
MINIMUM CONE DISTANCE 0"(0)
MAXIMUM PITCH ANGLE      ANGULAR GEARS 105 DEGREES
MAXIMUM PITCH ANGLE      90-DEGREE SHAFTS 84 DEGREES/18MIN.
MINIMUM PITCH ANGLE      5 DEGREES/42MIN.
MAXIMUM RATIO 10/1
MAXIMUM PITCH DIAMETER SEE TABLE
MAXIMUM FACE WIDTH      3.5" 89
MAXIMUM STROKE LENGTH 5" 4.5" 127-114.3
INDEX RANGE 5-100
INCLUSIVE  UP TO 200 MORE TEETH ARE RECOMMENDED FOR BETTER DESIGN
MAXIMUM PITCH 3 DP NOMINAL 8.5 MODULE
DIAMETER OF HOLE IN WORK SPINDLE LARGE END 3.906" 99.2
SPINDLE TAPER PER FOOT 609 15.5
DEPTH OF SPINDLE TAPER 6" 152.4
DIAMETER OF SPINDLE THRU-HOLE 3.063 77.7
SPINDLE NOSE TO CENTER LINE 2.5 TO 15" 63.5 TO 381
THIRTEEN (13) TOOL SPEEDS IN
STROKES PER MIN      64 TO 495
SIXTEEN (16) FEEDS FROM 10 SECONDS TO 2 MINUTES 11 SECONDS PER TOOTH
FLOOR SPACE REQUIRED FOR MACHINE 76" X 56" (1930X1420)
MACHINE NET WEIGHT, 13,600 LBS.      (6,863 KG)