Advanced Search
Surplus Record logo

SLITTING LINES

60" x .135" Cincinnati slitting line, 40000 lb., used

Request a Quote
Share

General Specifications


Width: 60.0"
Arbor: .135"
Manufacturer: Cincinnati
Lbs.: 40000
Stock #: VX-1569
Price: Request a Price

Dealer Information
VX-LLC logo
VX-LLC
PO Box 828
Holland, OH 43560
Facebook icon  twitter icon  
Contact: Victor Van Deilen
Tel: 734-854-8700
Fax: 734-854-8705
Email: info@vx-llc.com
  
Gold Level Dealer Since 2013
Website: www.vx-llc.com/

View our Equipment Listings

Detailed Product Description


General Specifications:

Material: Hot rolled and Cold Rolled steel
Shear Strength: 50,000 PSI
Maximum Coil Weight: 40,000 Lbs.
Maximum Coil Width: 60"
Minimum Coil Width: 6" incoming (determined by the coil O.D. and/or gauge)
Coil O.D.: 72" maximum, 36" minimum
Coil I.D.: 20" to 29" Entry, 20" exit
Gauge: .018"- .135"
Line Speed: 275/550/950 FPM @ 72 coil O.D.
Hand of Line: Left to Right

Additional Line Data:
Two (2) hydraulic pump motors (15 HP, 1750 RPM AC)
Uncoiler feed up motor (3 HP, 1750 RPM - Hydraulic pressure available @ 1500 PSI maximum.
Coil Car hydraulic pump motor (15 HP, 1750 RPM, AC)

Equipment Included:
3 Arm Entry Turnstile
40,000# capacity per arm
Hydraulic rotation
Arms are channeled for C-hook use
Braner Coil Car
Floor standing L-type design
Self-contained hydraulic system with 15 HP motor.
Uncoiler
40,000 # capacity
64" mandrel face
20" to 29" ID
Hydraulic expansion
Slide base
Hold down, hydraulic driven
Entry Unit
Fully articulating peeler
Pinch rolls
Edge guides
Crop shear
Injection Slitter
2 heads with 7" diameter arbors
71" arbor face
Single eccentric design
125 HP, 500 V., 850-2550 RPM DC Motor with AC feed up drive
Oscillation Scrap Winder
Pit Cross Over Table
Drag Board Tension Stand
Recoiler
40,000# capacity
20" ID with 66" face drum
Over arm separator
Hydraulic grip and collapse
125 HP, 500V, 1750-1950 RPM DC motor
Reducer: 31.39:1 ratio
3 Arm Exit Turnstile
40,000# capacity per arm
Hydraulic push-off
Hydraulic rotation
Arms are channeled for C-hook use

The Cincinnati slitter comes equipped with an AGT400 Thickness Gauge & S.P.C. designed by Advanced Gauging Technologies, L.L.C. that provides continuous, high speed, non-contact, accurate and reliable thickness measurements.

The Cincinnati slitter also comes equipped with a complete set of ASKO Shimless tooling along with the EdgeMaster software program.

Slitter knife OD - 11-1/2"
Quantity - (62) 1/4" knives, (59) 1/2" knives