Advanced Search
Surplus Record logo

GRINDERS, CYLINDRICAL, PLAIN (Also See Grinders, Roll)

19" x 32" Toyoda #GUP40-80, cylindrical grinder, #13119

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Swing: 19"
Centers: 32"
Manufacturer: Toyoda
Model: GUP40-80
Stock #: 13119
Price: Request a Price

Dealer Information
Vander Ziel Machinery Sales logo
Vander Ziel Machinery Sales
6325 Alden Nash
Alto, MI 49302

Contact: Steve Vander Ziel
Tel: 616-868-1111
Fax: 616-868-1115
Email: Sales@vanderzielmachinery.com
  
Gold Level Dealer Since 2006
Website: www.vanderzielmachinery.com

View our Equipment Listings

Detailed Product Description


Toyoda 19″ x 32″ Cylindrical Grinder, Model GUP40-80

Serial # RB4187
Asset # 13119

Specifications:
General
Max. Distance Between Centers 32″
Swing over Table 19.68″
Diameter of Component to Ground
– Max. Diameter by 20″ Diameter Wheel 14.5″
– Min. Diameter by 15.4″ Diameter Wheel 0″
Max. Load Held Between Centers 1,100 lbs.
Wheelhead
Swiveling Angle -/  30 Degrees
Total Feed Stroke 11.6″
Handwheel Feed Stroke 6.5″
Additional Stroke by Sliding on Sub-Slide Base 3.5″
Automatic Rapid Feed Stroke 1.57″
Automatic Intermittent Infeed Amount 0.0001 – 0.0016″
Movement per Turn of Handwheel 0.04″
Movement per Graduation of Handwheel 0.0001″
Grinding Wheel
Size 20″ x 3″ x 8″
Max. Width 4.4″
Speed 1,120/1,300/1,525 RPM
Table
Min. Automatic Reciprocating Stroke 0.2″
Traverse Speed 2- 157 ipm
Movement per Turn of Handwheel 0.065″
Swiveling Angle 10 deg. / 5 deg.
Workhead
Swiveling Angle 90 deg. / 10 deg.
Spindle Speed 16/25/40/64/100/160 RPM
Center Taper MT No. 5
Spindle Bore Diameter 1.57″
Spindle Type Live & Dead
Tailstock
Center Taper MT. No. 5
Max. Retracting Stroke of Taper 1.18″
Center Retraction Hydraulically / Manually
Motor
Spindle Motor 7.5 HP
Work Drive Motor 1 HP
Hydraulic Pump Motor 2 HP
Lubricating Oil Pump Motor .33 HP
Coolant Pump Drive .33 HP
Tank Capacity
Hydraulic 31.7 Gallons
Coolant 79.3 Gallons
Dimensions 169″ x 114″ x 63″ H
Weight 10,400 lbs.

Preliminary Specifications – Subject to Verification