Advanced Search
Surplus Record logo

GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #650, 34" diameter, 5" face, 5-80 index range, 6" taper hole diameter, 6-167 RPM, 15 HP, #28330

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Manufacturer: Gleason
Model: 650
Stock #: 28330
Price: Request a Price

Dealer Information
Mohawk Machinery Inc logo
Mohawk Machinery Inc
10601 Glendale Rd
Cincinnati, OH 45215-6330

Contact: Mr.Secord
Tel: 513-771-1952
Fax: 513-771-5120
Email: secord@mohawkmachinery.com
  
Gold Level Dealer Since 1956
Website: web.mohawkmachinery.com

View our Equipment Listings

Detailed Product Description


MODEL NO. 650 GLEASON HYPOID SPIRAL BEVEL
GEAR GENERATING MACHINE
SERIAL NO. 754202 ( NEW IN 1978 )

SUITABLE FOR THE CUTTING OF LARGER SPIRAL BEVEL, HYPOID,
AND ZEROL BEVEL PINIONS AND MATING GEARS UP TO
34″ (863.6MM) DIAMETER, 5″ (127MM) FACE, WITH
1.08 DP (MODULE 23.5) CUTTING CAPABILITY

EQUIPMENT / FEATURES:
VARIABLE CUTTER SPEED ARRANGEMENT INCLUDING SET OF SPEED
CHANGE GEARS
ASSORTED RATIO-OF-ROLL, MODIFIED ROLL, AND INDEX CHANGE GEARS
W/TOOL & GEAR CABINET
HYDRAULIC CHUCKING ATTACHMENT WITH DRAW-ROD & NUT
AUGER-TYPE CHIP CONVEYOR AND MAGNETIC CHIP SEPARATOR
CUTTER GUARD AND MANIFOLD FOR HIGH VELOCITY COOLANT
SECURITY COVER FOR SET-UP PANEL
STANDARD WORK SPINDLE BORE 6″ X ¾″ TAPER (#60)
MODIFIED ROLL MECHANISM, INCLUDING CHANGE GEARS FOR ONE PART
ROLL CENTERING
SLIDING BASE SET-IN MECHANISM, INCLUDING CONTROLS
CRADLE ROTATIONAL SET-OVER, INCLUDING CONTROLS
NO ROLL ARRANGEMENT FOR FORMATE AND/OR “DUAL-ROTATION″ MACHINE
OPTIONS, INCLUDING CONTROLS
VARIABLE RATE OF ROLL ARRANGEMENT INCLUDING CONTROLS
DOUBLE ROLL ARRANGEMENT, INCLUDING CONTROLS
PLUNGE FEED MECHANISM
STOCK DIVIDING GAUGE
ECCENTRIC SET-OVER ARRANGEMENT INCLUDING CONTROLS
RELAY-LOGIC CONTROLS (IN PLACE OF STANDARD PROGRAMMABLE
CONTROLLER)
COMPLETE ELECTRICAL EQUIPMENT FOR 3-PHASE, 50 OR 60 HZ,
380-550 VOLT INSTALLATION, INCLUDING 110VAC OR 220VAC
CONTROL CIRCUIT, TEFC-AC MOTORS (NEMA T-FRAME OR T-FRAME
MODIFIED TO IEC DIMENSIONS), DC DRIVE AND CONTROL, AND
SINGLE-SPEED CUTTER MOTOR. ELECTRICS WILL COMPLY TO JIC
OR IEC TECHNICAL SPECIFICATIONS. DOCUMENTATION TO JIC STANDARDS.

PRINCIPAL SPECIFICATIONS:
EXTREME RATIO      10:1
ROOF ANGLE RANGE 0º TO 90º
GEAR DIAMETER – MAXIMUM 34″ (863.6MM)
EXAMPLES OF MAXIMUM GEAR PITCH DIAMETERS
WITH 36ºGEAR SPIRAL ANGLE USING19.7″ (500MM)
CUTTER DIAMETER ( ) AT THE FOLLOWING RATIOS:      
1 X 1 28.50″ (723.90MM)
2 X 1 34.00″ (863.60MM)
5 X 1 34.00″ (863.60MM)
MAXIMUM RADIAL SETTING      **15.00″ **(381MM)
FULL DEPTH – MAXIMUM      1.5″ (38.1MM)
FACE WIDTH – MAXIMUM      5.000″ (127MM)
COARSEST PITCH (MODULE)      1.08 DP (23.5 MODULE)
INDEX RANGE *      5 TO 80 INCLUSIVE
WORK SPINDLE TAPER HOLE DIAMETER AT LARGE END      6″ (152.4MM)
WORK SPINDLE TAPER PER FOOT      0.75″ (19.0MM)
WORK SPINDLE DEPTH OF TAPER      6″ (152.4MM)
DIAMETER THROUGH SPINDLE OF HOLE      5″ (1270MM)
CUTTER DIAMETERS UTILIZED      9″, 10.5″, 12″, 14″, 16″, 18″
(200,250,320,400 & 500MM)
WORK-HEAD OFFSET ABOVE CENTER – MAXIMUM       ***4.5″ (114.3MM)
WORK-HEAD OFFSET BELOW CENTER – MAXIMUM       ***4.5″ (114.3MM)
MACHINE CENTER TO HOSE OF SPINDLE – MAX       23.5″ (596.9MM)
CUTTER SPEEDS       6 TO 167 RPM (STEPLESS)
CYCLE TIME, INFINITELY VARIABLE       FROM 7 SECONDS/TOOTH MINIMUM
MOTORS      ( 60 HZ ) 50 HZ )
CUTTER DRIVE MOTOR, 15HP       1800 RPM 1500 RPM
HYDRAULIC MOTOR, 7.5HP      1200 RPM 1500 RPM
COOLANT MOTOR, 2HP      1200 RPM 1500 RPM
D.C. GENERATING DRIVE MOTOR, 6HP      1200 RPM

* MOST NUMBERS UP TO 120 CAN ALSO BE ACCOMMODATED BUT MAY REQUIRE SPECIAL CHANGE GEARS.
** THIS RADIAL SETTING CAN BE INCREASED TO 18.5″ (462.50MM) FOR SOME APPLICATIONS
*** MAXIMUM OFFSET APPLIES TO PINION AND GEARS UP TO 25″ O.D. FOR 34″ DIAMETER GEARS MAXIMUM OFFSET IS 0″