Used MACHINING CENTERS, VERTICAL, CNC: Machinery & Used Equipment For Sale

CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, VERTICAL, CNC

Apex Auctions assists in the liquidation of surplus plant & equipment

There are 929 listings in this category
File update: Fri, Mar 19, 2010 01:28

ORIGINAL SORT

Sort by Location
Sort by Date
Advanced Search

Acra, 40"x 24"x 24",8000 RPM,20 ATC,#40 tpr,15/20 HP,Fanuc OIMC ctrl,2009 (6802)

Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill

Acroloc #AF15-32, 32"x, 16"y, with Fanuc control (2996)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Acroloc #AF22-20, 15"x30"table,20"X,16"Y,8"Z,0-7000 RPM,Fanuc OM,chip conv.,'90

HCI Machines, Venetia, PA 724-942-3382 (Fax 724-942-5194) Terry Blackman

Acroloc #M-12, Actrion CNC, 12 ATC, Bijur lube, spray mist clnt, Ser.#173, #5469

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

Aital Mac Smart 3500, pendent control, 11000 RPM, 25 ATC, ISO 40, 2005

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Akira-Seiki Performa #JRA, rigid tapping,12 ATC,9k RPM,Mits.MI645 ctrl,2007

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Akira-Seiki Performa #V3A,32"x30"x30" trvl, 9K RPM,24 ATC,#40 tpr,chip auger,'06

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Amera Seiki #VB-2, bridge mill,87x79x35",87x65"tbl,600rpm,Cat 50,30hp,'07,#S3722

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Amera-Seiki #A-2, demo/used, 24"x18.1"x18.1",10hp,10k RPM,CT40,24 ATC,Fanuc 0iMC

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #A3, 43x22x22",20 HP,12000 RPM,24 ATC,CT40,CTS,auger,Fanuc 0IMC,'10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #A4, 51x27.5x28",25hp/gear,8k rpm,CT40,CTS,24atc,Fanuc 0IMC/MGI,'10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #A4/50, 51x27.5x28",30hp/gear,6K rpm,ct50,cts,24atc,fanuc 0imc/mgi,'10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #A5, 63x31.5x27.5",30 HP/gear,6k RPM,CT50,CTS,32 ATC,Fanuc 0IMC,'09

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #VB2, 87x79x35",30 HP,6k RPM,2 spd/gear,CT50,CTS,CC,Fanuc 21iMB,'2010

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #VB3, 126x79x35",30 HP,6k RPM,2spd/gear,CT50,cts,cc,Fanuc 21iMB,'10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #VB4, 165x79x35",30hp,6000rpm,2spd/gear,CT50,cts,cc,Fanuc 21iMB,'10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #VX5-3,full5-axis,118x40x30, /-40*deg,40hp,12Krpm,50tpr,Fanuc-31iMA5,10

Welsh Machinery/Amera-Seiki, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amura-Seiki #VMC2185, CNC. 80"x30x30" trvl, Fanuc 15M, 50 tpr, conv, Nice, 1991

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Ares Seiki #R560-14, hi-paced production center,Mits.64SM ctrl,12k RPM,'07

Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Fax 540-344-3830) Dave Gauvin

Atrump #E216, 26"X,16"Y,20"Z,7.5 HP,6K,Centroid M400S,16 ATC,less than 200 hrs,'05

Ted Grob Sales Inc, Grafton, WI 262-377-8220 (Fax 262-377-0778) Ted Grob

Awea #3016, Fanuc 18MC, 120.5"X,63"Y,30"Z, 6000 RPM, 50 taper, 60 ATC

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh

Awea #SP3016, Fanuc 18MC, 112"x 59"table, #50 taper, 6000 RPM, 60 ATC, 2002

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Awea #VP1050, Fanuc OM, 41.63"X, 23.6"Y, 21.3"Z, 20 ATC, 7000 RPM, 1993

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Awea #LG4030V, 5-axis, 157"X,118"Y,40"Z, GE Fanuc 16i, 32 station ATC, 2002, #19438

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Awea #PB2110, 83"x 43" x 20" travels, 50 taper, 32 ATC, Fanuc, 1994

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

Awea #VP2012, 78.7"X,47.2"Y,30"Z, 30 ATC, chip conv, Fanuc 18MB, 1999, #18921

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Awea #VP2012, CNC Dbl.Col.VMC, 51.5" DBC, Cat.50, 30 ATC, Fanuc 18M,mfg.'99,#1469

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Awea #VP2012, 78.7"X,47.2"Y,30"Z, 5000 RPM, 30 ATC,Cat.#50,Fanuc 18M,2000

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Awea #VP2012, 18M, 79",47",30", 6000 RPM, 30 ATC, 25 HP, RT, 1999

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Awea #VP2012, 78.7"X, 47.2"Y, 30.0"Z, Fanuc 18M, 1997 & 1999, #74209

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Benchman #VMC4000, CNC tabletop,6.25"x 19.5"TWS,12"X,6"Y,9"Z,R8 taper (25263)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Bostomatic #415-1, CNC Vertical Machining Center, 20"X, 14"Y, 16"Z, BDC 3200 Crtl.

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Bostomatic #605, 5-axis CNC Vertical Machining Center, 1998

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Bostomatic #BD12G, graphite, BD 3200 cont, 30K RPM, 15"X, 15"Y, 12"Z, 1999

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

Bostomatic #BD505-HSK,5-ax,40"x12.5"x17",BDC3200X,8k rpm,Nikken 320mm,5hp,'98

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

Bridgeport #760XP3, 30"X,24"Y&Z,15k RPM,CT40,48atc,TSC,18iMB,'05,#dk18372

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Bridgeport #GX1000VMC,40x20x20",24atc,8000rpm,cat40,17.5hp,siemens sinum.810d.'08

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Bridgeport Interact #308, 8 sta.ATC,27"X,12"Y,Heidenhain CNC 2500,coolant,lube,#15069

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Interact #412, 17.7"x,12.2"y,11.8"z,Fanuc OM,#40 tpr,12 ATC,7.5 HP,'89

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Interact #412, CNC vertical machining center, 1990

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Bridgeport Interact #412 CNC Vertical Turning Center, 33.10"x 12.60" Table

Barnett Machine Tools Inc, Mount Carmel, IL 618-375-7240 (Fax 618-375-7244) Phil Barnett

Bridgeport Series I, 2 HP, ProtoTrak Mx2, vise, very clean

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

Bridgeport #TC3, 14x36"tbl,16x30x20"tvls,Cat.30 spdl,22 pos.ATC BPC MC CNC,2000

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Bridgeport Torq-Cut #22, 22x16x20",DX32 ctrl,BT40,22 ATC,tooling,8k RPM,1995

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Bridgeport #XR-500HSC, 20"x16"x16",HSK32E,16atc,Heidenhain ITNC530,'99,#dk18365

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Brother #T31A, 13.8"X,9.8"Y,13.8"Z, 18 ATC, Brother CNC-A00 control, 1999, #19054

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Brother #TC228, drill & tap,Brother 525 conversational CNC,16"X,11"Y,29.8"Z,1994

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Brother #TC229N, 18.9"X,14.2"Y,10.6"Z, 10k RPM, 14 ATC, 1996, #7595

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Brother #TC32A, 17.7"X,12.6"Y,16.14"Z, 18 ATC, Brother CNC-A00 CNC, 2000, #19055

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Burgmaster #VTC330, 33"x 47",12"vert, #45 tpr, 2000 RPM,20 ATC,10 HP,AB7300

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

Butler Elgamill #HE/8M,244"x,65"y,38"z,40x318"tbl,univ.mill,40atc,Heid.TNC355,'90

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Chen Ho #VMC-1400, vertical machining center, 55" X, 24.8" Y, 29.9" Z, 20 HP, 35-4000 RPM, BT50 taper, 1999

S D Cohen Machinery Ltd, Dundas, ON 905-921-2001 (Fax 905-388-9404) Jonathan Riley

Chevalier #QP2040L, Fanuc OIM, 40"X,21"Y,20",24 ATC,#40 tpr,IPUP,low hrs,2008

R C M Industries Inc, Bayville, NY 516-628-0582 (Fax 516-628-0527) Richard Muller

Chevalier #VMC2040-L, 40x20x20",Cat 40,20 ATC,Anilam 6000,4th axis table,2002

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Chevalier, Fanuc 18M, 24 ATC,50 tpr,72"X,30 HP,260 HPress,IPUP,1964 cut,hrs,2005

All Machinery Sales Inc., Sturtevant, WI 262-886-3432 (Fax 262-878-0368) Dave Buske

Chiron #DZ12S, 2 spindle,21"x12"x16",full 4th axis,Fanuc 21M,1999,(4)in plant

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Chiron #FZ08S,GE/Fanuc 21MCN,24.4"x10.6"tbls,10500 rpm,HSK32,12atc,5hp,1997

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Chiron #FZ08W, GE/Fanuc 21MCN,(2)17.7"x11.8"pallets,10500rpm,HSK-32,12atc,'97

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Cincinnati #20V80, Centroid M400, 80"x 30"x 25", 5-axis, #50 taper, #25495

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Cincinnati #3-SP, 5-axis, 216"X, 42"Y, 18"Z, Acramatic 950

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Arrow 500, 20"x20"x20", 6000 RPM, Acramatic 2100, 1996

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Arrow 500, vertical machining center, FNC 3500 control

DiPaolo CNC Retrofit Ltd, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

Cincinnati Arrow 750, 30"X,20"Y,20"Z,6000 RPM,24 ATC,Acramatic A2100,1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Cincinnati Arrow 750, 30"x 20"x 20",CT-FNC,4th axis rot,8"3-jaw,7.5 HP,1995,#8329

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

Cincinnati Arrow 750, 30"X,20"Y,20"Z, Cat 40, 6000 RPM, CT Arrow, 1995

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Cincinnati Arrow 1000, 40"X,20"Y,22"Z,4th axis,44"x 22"table,21 ATC,cat,#s27341

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Arrow 1000, 40"x20"x22",5000 RPM,21 ATC,Cat 40,4th axis 10"3-jaw chuck

Benchmark Machine Tools, Tulsa, OK 918-234-8665 () Matt Reed

Cincinnati Arrow 1000, Acramtic A2100 ctrl,44"x23.6"tbl,40"X,20"Y,22"Z,21 ATC,8000 RPM,22 HP

Modern Tool Ltd, Calgary, AB 403-236-1150 (Fax 403-236-4277) Mark Senecal

Cincinnati Arrow 1000, Acramatic 2100 ctrl, 40"x20"x22", 15 HP, 6000 RPM, 1996

Jamestown Machinery Inc, Jamestown, PA 724-932-2674 (Fax 510-740-3589) John Krygowski

Cincinnati Arrow 1000, 40"X,20"Y,22"Z,44"x 22" tbl, Acramatic 2100, #S26728

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Arrow 1000, 40'X,20"Y,22",40 tpr,21 tls,8k RPM,chip conv,Acra 2100,#8301

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Cincinnati Milacron Arrow 1000 Series 2, VMC,GE Fanuc 18iM,1120mm x 600mm table,21 ATC,40DV/Cat spdl nose,spindle tlng,2003

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Milacron Arrow 1000 Series 2, VMC,GE Fanuc 18iM,1120mm x 600mm table,21 ATC,40DV/Cat spdl nose,spindle tlng,2002

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Arrow 1000 VMC, 40"X, 20"Y, 22"Z, rigid tapping, touch screen graphic

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Cincinnati Arrow 1500, Fanuc 18i,30"x60"trvl,8k RPM,BT40,12"Nikken rotary tbl,1997

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati Arrow 2000, 80"X,30"Y,30.31"Z,12 HP,10000 RPM,Acramatic 2100,1999

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Arrow 2000 ERD, 80"X,30"Y,30"Z,22 HP,#40 tpr,Acramatic 2100,clnt,1998

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Cincinnati #CFV800I, Fanuc 18i-MB,CTS,12.5k RPM,9"rotary table,tlstk,2005,#27363

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Cincinnati ERO Arrow 500, 20"x20"x20",60-6000 RPM,Cat 40,ATC,Acramatic ctrl

Benchmark Machine Tools, Tulsa, OK 918-234-8665 () Matt Reed

Cincinnati Milacron #ERT, Sabre 1250, Acra 850SX, 26"x53.9"TWS. 49.2"X, 25.6"Y&Z ,#25634

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati #FTV840-1800, Acra 2100 CNC,72"X,32"Y,31.5"Z,48 ATC,8k RPM,2003

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Cincinnati #FTV850-2500, Fanuc 18MB,100"x32"x31.5",36atc,#50 tpr,40hp,6k RPM,'05

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Cincinnati Lancer 1250, Acra 2100,thru-spdl,probe,chiller,30 ATC,Cat 50,1997

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Cincinnati Lancer 1250, 50"X,30"Y & Z,60"x 30"tbl,Acramatic 2100SX CNC,1997,#8056

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Cincinnati Langer 1255, Acra 850SX/4th,26"x50"x26",Cat 50,30 ATC,tlg,U/P,exc,'94

Johnston Industrial Sales Co., Cleveland, OH 216-381-7701 (Fax 216-486-1641) C. Johnston

Cincinnati Milicron Lancer 1250, 50"x26"x26",20hp,30atc,#50,Acra 850SX,'94,#281222

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Cincinnati Rail Type, 5-axis 30V,480"X,84"Y,24"Z,30 HP,4000 RPM,Acramti.950,#10291

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Sabre 500, 4-axis,38"sub tbl,6k RPM,21 ATC,MPG,chip conv,full encl,'94

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

Cincinnati Sabre 750, 30"x15"x20",34"x17"table,21 ATC,8k RPM,Acra 850MC,1990

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Sabre 750, Acramatic 850,30"X,15"Y,20"Z,21 ATC,give away price,#10464

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Cincinnati Sabre 750, 21 ATC,30"X,15"Y,20"Z,850 SX control,34"x20"table,4th axis,#MV1177

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Cincinnati Milacron Sabre 750, 30"x20"x20",15hp,21atc,#40,Acra 850SX,'93,#281221

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Cincinnati Sabre #1000, Acra 850SX,40"X,20"Y,28"Z,15 HP,8000 RPM,21 ATC,1995

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Cincinnati Sabre 1000, 4-axis CNC VMC, #40 taper, speeds to 8000 RPM, #1345

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Cincinnati Sabre 1250, 50"X,25"Y,25"Z,#40 tpr,8k RPM,Acra 850SX,21 ATC,15 HP,'92

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Cincinnati Sabre 1250, 49.2"x25.6"x25.6", 4-axis, #40 taper, 22 ATC, 8000 RPM

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Sabre 1250, VMC, 49.2"X,25.6"Y,25.6"Z,4-axis,#40 taper,22 ATC,1991

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Cincinnati Sabre 1250, 50"X,26"Y,26"Z,54"x30" tbl,#40 tpr,Acramatic 850SC,(7883)

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Cincinnati Sabre 1250, Fanuc OM,26"x50"trvls,8k RPM,BT40,4th axis ready,1995

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati Sabre 1250, CNC VMC,Acramatic 2100 CNC,50"X,25.9"Y,25.9"Z,53.9"x26"table,Cat 40,60-8k RPM,15 HP

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Cincinnati Sabre 1500, 60"X,30"Y,32"Z,#40 taper,42 ATC,8k RPM,chip conveyor,#8288

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Cincinnati Sabre 500, 20"X, 20"Y, 22"Z, 21 ATC, 8000 RPM, Acramatic 2100, 1996, HB-18037

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Cincinnati Sabre 500, CNC VMC,Acramatic 2100 ctrl,20"x 25"table,20"X,15"Y,20"Z,#40 taper,30 ATC,chip conveyor,#MV2437

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Cincinnati Milacron Sabre 500 VMC, 20"X,15"Y,20"Z, Acramatic 850SX, Cat 40, 21 ATC, 1994, #4960

Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne

Cincinnati Smart-E 800, Tool Room CNC,vertical machining center, 39.7" x 19.7"

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Cincinnati #U-5, 5-axis rail type CNC profiler,360",144",39.4",4k RPM,#50 tpr,'01

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Cincinnati #U-5, 5-Axis, CNC Profiler

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spdl.,5-axis,600"X,84"Y,28"Z,75 HP,7200 RPM,Acramatic 950,#20052

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spdl.,dbl.gantry,120"of bed w/2 gantries,84"Y,18"Z,30 HP,#20053

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spindle, 5-axis 10K, 576"X,84"Y,28"Z, 75 HP, Siemens 840D, #20051

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Clausing #B700, 16"x26"x18",Fanuc OM,18 ATC,BT40,4000 RPM,10 HP,low cost

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Clausing Kondia #B-700, 27"x 16"x 20"travels, 18 ATC, Fanuc OM

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-7250296) Paul Braeseke

Clausing Kondia #B700, Fanuc 0M controller, full enclosure, 4000 RPM, very clean

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Clausing Kondia #HM1060, 40"x 24"x 20"travels, 18 ATC, Dynapath Delta 60

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-7250296) Paul Braeseke

Comet #VMC510P, 3-axis,32"x15.7"table,21"X,16"Y,20"`Z,Cat 40,16 ATC,320M control,#8747

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Daewoo Ace #V30, 20.1"X, Fanuc OM, dual table, 6000 RPM, 12 ATC, 1989

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Ace #V35, pallet changer, 1985

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Daewoo Ace #V45/V50, APC & 2 pallets,Mitsubishi 520MR ctrl,30 ATC w/cat,1997

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Daewoo Ace #V50, M520,40"x 20"x 20",30 ATC,6000 RPM,thru spindle coolant,1996

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Daewoo Ace #V50, Fanuc OMC,36 ATC,40"X,20"Y,20"Z,#40 taper,(2) chip conveyors,coolant thru spindle,all manuals

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Daewoo Diamond #DMV500, Fanuc 18M,40x20x20",8k RPM,Cat 40,side mnt.atc,'99

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Daewoo #DMV500, 40"x 20",47"x 20"tbl,40"X,20"Y,20"Z,8000 RPM,#40 tpr,30 ATC,'98

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Daewoo #DMV-650, Mits 320M control, 51"X,25.6"Y & Z, 25 HP, 8000 RPM, 1997

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Daewoo #DVC500, Fanuc 18iM, index tables, Diamond series, 2000

Solomon Machinery, Eastpointe, MI 586-774-2030 (Fax 586-774-2801) Russ Solomon

Daewoo #MYNX400, machining center,19"x39"tbl,8k RPM,Fanuc CNC,2000,#09021

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Daewoo #MYNX500, Machining Center,19"x47"tbl,8k RPM,Fanuc CNC,2000,#09022

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Daewoo/Doosan #DMV400, 22"x15"x22",dual pallet,10K spdl,30 ATC,Cat 40,TSC,'01

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Dah Lih #MCV1020, 40"X,Fanuc OM,20"x 51"T-slotted table,Cat.50,1992,FOB Elk River,MN

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Dah Lih #MCV1020BA, 40"X,22"Y,20"Z,16 ATC,Fanuc 18M,rigid tap,2000,#16246

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Dah Lih #MCV2100, 83"X,33"Y,30"Z, 32 ATC, BT-50, Fanuc 0M, 1996, #16245

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Dah Lih #MCV2100, 82"X, 33"Y, 30"Z, Fanuc OM control, 32 ATC, 1997

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

Dah Lih #MCV520, vertical, 20" x 15", 1986, #6461

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

Dah-Lih #MC2100, 3-axis,32 ATC,BT-50,31.5x90.6"tbl,82.7x33.5x29.9",Fanuc 11M,'91

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

Deckel #DMF500, 96" x 36.2" x 32.3", 5-axis vertical machinng center, 2005

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Deckel Maho #DMC-63V, 25"X,20"Y,20"Z,24 ATC,chip conv,Seimens 810D CNC,1998,#18050

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Deckel Maho #DMC63V, 24.8"x19.7"x19.7",10k Rpm,Cat 40,Siemens Sinumerik 810d,'01

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Deckel Maho #DMU100T, 42"X, 27"Y, 27"Z, 5-axis, 32 ATC, Renishaw probe, 2002

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Deckel Maho #DMU50T, 19"X,17"Y,15"Z, 5-axis,Millplus control,low hours,2002

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Deckel Maho #DMU50T,19.6"x15.7"x15.7",9k Rpm,27.5x19.7"tbl,Heidenhain Tnc 426,'99

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Deckel Maho #DMU80P, univ.mill,Hi-Dyn,5-ax,31.5"x,27.5"y,23.6"z,60atc,'01,#10268

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Deckel Maho #DMU80P,5-ax,Heidenhain Millplus CNC,25x25"pallt,A-axis tilt/C-rotry,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Deckel Maho Gild #DMF250 Linear, 98.4"X,36.2"Y,32"Z,5-axis,18000 RPM,Heidenhain ITC5,#9974

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Depo #MCFV125, 50"x 24"x 30", 6000 RPM, 2-ATC, 2-pallet, coolant thru, 1998 (8342)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

DMG #DMC-125U 5-axis, 49"X,39"Y,39"Z, 12000 RPM, 60 ATC, Millplus IT CNC, 2002, #18708

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

DMG, 49.2"X, 39.4"Y, 39.4"Z, universal 5-axis, 60 ATC, Heidenhain Mill Plus, 2002

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

DMG #DMU50 EVO, 5-axis,19.7"X,16.5"Y,15"Z,18k RPM,Cat 40,32 ATC,laser toolrm,2001

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

DMG #DMU100T, 5-axis, 42.5"X,28"Y,28"Z, 18K RPM,Cat.40,32ATC,CTS,probe, 2002

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

DMG #DMU100U Duoblock, Heidenhain ITNC 530,5-pllt pool/changer,Cat.50,10k RPM

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

DMG #DMU50T, 5-axis,19.7",17.7",15.7",10k RPM,probe,like new,out of gov't.lab,2002

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mark Piedmont

DMG #DMU80, 5-Axis Vertical Machining Center, 2005

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

DPM Trak #V5, vertical milling machine,Prototrak ctrl,40"x20"x24",NMTB 40 tpr,'04

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Emco Famup #MCX-650, Fanuc OMC,8k RPM,26"x16"trvls,30 ATC,chip conv.,2 pllts,'92

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Enshu #550V, Fanuc 16M,41.3"x,21.7"y,22"z,12"CNC rtry.tbl,30atc,Cat.50,6k RPM,'94

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Enshu #550V, Yasnac ctrl,41.3"X,21.7"Y,22"Z,#50 taper,30 ATC,good condition,1990

Addy Machinery Co, Clinton Township, MI 586-741-3000 (Fax 586-741-3015) Jay Addy

Enshu #DT-CL,19.7x15.7x11.8",10k RPM,BT30,16atc,1417ipm,Fanuc OM,'95 (2)(1)w/APC

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Enshu #DT-CL, Fanuc 0MC, 19.7"x 15.7"x 11.8", 10k RPM, 16 ATC, Cat 30, 1993

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Enshu #ES-400, 25.5"X,17.7"Y,18.1"Z, 8000 RPM, 1417 rapids, 10 HP, clean, 2002

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Enshu #EV450, 22"x 17.7"x 18.1", 10000 RPM, 20 ATC, #40 taper, 10 HP, 1999

Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Fax 248-543-7004) Kimball R Roberts

Enshu #EV650, 25x78"tbl,63"x,25.6"y,26"Z,30 ATC,Cat.50,6K RPM,20HP,2001 (7951)

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Enshu #S300, 19.7"X,15.7"Y,15"Z, Enac (J50), w/ double pallets, 1999

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Enshu #S400, 25.6"X, Yasnac, 10000 RPM, 2 pallets, 20 ATC, 2000/2003, #49654

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Enshu #VMC430,Fanuc 11M,39.7x18"tbl,31.5"x,18"y,20"z,4500rpm,Cat.40,20atc,'88

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Enshu #VMC-430, CNC, Fanuc 11M, 30"X,17"Y,20"Z, Cat 40, 8000 RPM, excellent, 1987

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Enshu #VMC530, 40"X,21"Y,22"Z, 30 ATC, Cat 50, Creative Evolution CNC, 1984, #18251

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Enshu #VMC530, 39" x 20" x 22"Z, 50 taper,30 ATC,Fanuc 11M, 4th axis table,1987

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Enshu #VMC530, Fanuc 11M control, 20 HP, 4000 RPM, Cat 50, 1988, #3573

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Enshu #VMC650, 51"x25"x22", BT50, 30 ATC, twin pallet, Fanuc 11M, 1985

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Eumach #MC-1400P, 55.1"X, 25.58"Z, CNC vertical machining center, 1998

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Excel #810, Fanuc O-M, 36"x 19"table, 24 ATC, Kurt vises, coolant system

Modern Tool Ltd, Calgary, AB 403-236-1150 (Fax 403-236-4277) Mark Senecal

Excel #810, 32"x, 20"y, 22"z, Fanuc 0M control (2997)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Excel #PMC10T24, 40"x 20"x 22"trvl,8000 RPM,#40 tpr,Fanuc 21iM,24 ATC,1997 (8226)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Excel #PMC5V, 20.1"X,16.1"Y,18.1"Z,Cat 40,to 8k RPM,17.1"x27.5"TWS,660 lb.tbl.load cap,'95

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Excel #PMC5VT20, 17"X, 25"Y, 17"Z, 3-axis, Fanuc 0M (3008)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Excel #SMT-350, VMC, 13.7"x 9.8"x 9.8", 15k RPM, APC, Fanuc 21M, 100 hrs, 2001

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Excell #CMT350T20, 13.8"x9.8"x9.8",Fanuc 21MB,plt sys,tlg,NT30 tpr,1998,#hb-17920

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Fadal #10XT, 30"x16"x20", 88HS control, 7500 RPM, Cat 40, very nice, 1994

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Fadal #2216, VMC w/extended height in Z-axis,88HS Fadal control,21 tool ATC

CNC Machine Sales, Orange, CA 714-335-5447 (Fax 714-538-5375) Chuck Gerrish

Fadal #3016, 30"X,16"Y,20"Z,10-10000 RPM,21 ATC,Cat 40,Fadal 88HS,2001,#10788

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fadal #3016, 30"X,16"Y,24"Z,Fadal 88HS control,rigid tapping,box ways,2000

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #3016HT, Fadal CNC 88HS control, 4th axis, coolant thru spindle, 1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Fadal #3016HT, 30"X,16"Y,28"Z, #40 tpr, 10k RPM, R.T., 32MP CNC, 2003

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4020, vertical machining center, Fadal 88HA, 21 ATC, 1993

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Fadal #4020, VMC,CNC 88 ctrl,21 ATC,CT40,rigid tap,10k RPM,VH-65 rotary table w/5C collet closer,remanu,excellent,1999

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #4020, CNC 88, 40"x20"x28", 4-axis, 10k RPM, bargain, 1990

D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey

Fadal #4020, CNC vertical mill,40"X,20"Y,28"Z,10k RPM,chip sweeper,video,1997

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Fadal #4020, 40"x 20"x 28" Ext.Z. 10K RPM, chip sweeper, 22-tlg, good cond,1997

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Fadal #4020, auto pallet changer, rigid tapping, 10000 RPM, 88HS CNC, 1996, #19168

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Fadal #4020AHT, machining center,Fadal 88HS,21 ATC,excellent,1999,rblt.2008

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Fadal #4020HT, 21 ATC,10k RPM,tool holders,40"x 20"x 20"travels,1989

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

Fadal #4020HT, 40"X,20"Y,20"Z,21 ATC,Cat 40,45-2500rpm,2500-10k rpm,'89,#351009

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Fadal #4020-HT, 4th axis w/rotary table,side mount 24 ATC,10k RPM,20 HP,mint,2005

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Fadal #4525, 24- station, side mount, ATC 32MP cont. chip auger, box ways, 2002

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #4525, Fanuc 18iM,45"x25"x32",10K spdl,coolant thru,chip conv.,2005

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #4525HT, 45"X,25"Y,32"Z,#40 tpr,10k RPM,Fanuc 18iM,CTS,24 ATC,4th card,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4525VHT, 45"X,25"Y,32"Z,Fadal MP ctrl,auger,10k RPM,30 HP,24 ATC,2002

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #5020HT, 3-axis,21 ATC,Cat 40,20"x57"tbl,50"x20"x20",10k RPM,ridgid,1997

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

Fadal #6030, Fadal CNC, 60"X,30"Y,28"Z, 21 ATC, 10000 RPM, 1996

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Fadal #6030, 21 ATC,60"x30"x30",4th axis pre-wire,hi-torque,10k RPM,1995,#S6037280

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Fadal #6030, MP control,rigid tap,21 ATC,servo,Cat 40,coolant thru spdl.,2000

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #6030, 88HS CNC, 21 ATC, 60"X, 30"Y, 30"Z, rigid, 2000

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Fadal #6030HC-VMC, Fadal ctrl,ser.#3504621,10-1000 RPM,22.5HP,62"x30"tbl,1996

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

Fadal #6030HT, 32MP CNC,60"X,30"Y,30"Z,#40 taper,10k RPM,box ways,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #6030HT, 88HS CNC, 60"X,30"Y,30"Z, 10K RPM, box ways, 40 taper, 2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #6535VMC, 65"x 35"x 30" table, 10k RPM, 21 ATC, Fadal 32MP, 2002

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Fadal #VMC10, 16"x 38"tbl , 7500 spdl.RPM, Fadal 88HS control, 21 ATC, '98

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

Fadal #VMC15, 20"X,16"Y,20"Z, 15 pos.ATC, Cat 40, Fadal 88HS control, 1994

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fadal #VMC15, 20"X, 16"Y, 20"Z, Fadal 88 ctrl, 16 ATC, 1994

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Fadal #VMC15, 20"X,16"Y,20"Z,2500 RPM,Cat 40,21 ATC,rigid tap,CNC 88HS,1994

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #VMC15, 20"X, 16"Y, 20"Z, 88HS CNC control, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #VMC15, CNC, 88HS Control, TS-27 Probe, Xtended Memory,1999

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC15XT, 30"X, 16"Y, 28"Z, HS88, 21 ATC, rigid tap, 7500 RPM, 1996

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC15XT, CNC mill,MP control,30"x16"x20",21 ATC,BT40,7500 RPM,remanufactured,excellent,2006

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #VMC15XT, 30"x16x20", 15 HP, 7500 RPM, rigid tapping,Cat.40,21 ATC,1997

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC15XT, 30" x 16" x 20", 15 HP, 7500 RPM, 1997

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC15XT, 30"X,16"Y,20"Z, Cat 40, 7500 RPM, rigid tap, 32 MP, 1994

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

1997 fadal vmc15xt 7500rpm, rigid tap, extended memory very clean

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Fadal #VMC20, Fadal 88 CNC,20"X,16"Y,16 ATC,coolant,RS232 port,7.5 HP,1991

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC2016L, Fanuc 18i-MB5,29.5"x 16"table,22"X,16"Y,20"Z,7500 RPM,2004

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #VMC2216, VMC, 22"x 16"x 20", Cat 40, 10k & 15k RPM, 1997 (2)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Fadal #VMC2216FX, 22"X,16"Y,20"Z,21 ATC,Cat 40,10-8000 RPM,Fanuc 0i-MC,2007

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Fadal #VMC-3016, 30"x16"x20",10k RPM,15 HP,Cat 40,21 ATC,Fadal MP-32 CNC control

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Fadal #VMC3016, MP32 ctrl,30"x16"x24"trvl,10k RPM,hi-torq.rigid tap,4th axis,'97

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC-3016, 88HS CNC,Cat 40,26"X,16"Y,16"Z,10 HP,high speed CPU,4th axis prewire,memory expansion 422K,1994

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #VMC-3016, 32-MP CNC ctrl,30"x16"x28",7500rpm,ext-Z Axis,4th axis,'02,clean

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Fadal #VMC3016, CNC, 88HS Control, 10K RPM, 30/20/18" trvls, 1996

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC3016, vertical machining center, 30"X, 16"Y, 20"Z, 1997

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Fadal #VMC3016, Vertical Machining Center, Ser.9502002, Stk. #54717

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

Fadal #VMC3016L, 30x16x20",Cat 40,88HS ctrl,21 ATC,15 HP,7500 RPM,rigid tap,'98

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Fadal #VMC40, 88HS CNC, 39"x16"tbl,22"X,16"Y,20"Z,7500RPM,21ATC,4th-axis rtry,'94

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Fadal #VMC4020, multi proc ctrl,4-axis,Fadal rotary table,Cat 40,10k RPM,2001

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Fadal #VMC-4020a, 40"x 20"x 20"travels, low use, original backlash settings, 7500 RPM, 1999

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Fadal #VMC4020HT, 10000 RPM,Cat.40,21 ATC,40"x20"x20",22 HP,rigid,2001,#S5999841

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Fadal #VMC-4020HT, 21 ATC,Cat 40,10k RPM,4th axis prewire,RS-232 cable,rigid tapping,hi-speed CPU,box ways,1997

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #VMC4020HT, 40"x20"x20"trvls,CNC 88HS ctrl,24 ATC,rigid tap,10k RPM,2006

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC4020HT, 40"x 20"x 20" Tvls, CNC 88HS Cntrl,Rigid Tap,15 HP,10K RPM,2007

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC4525, 45"x25"x24" trvls,10K RPM,rigid tap,chip conv,24 ATC,#40 tpr,2006

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC4525, 45"x25"x32",54"x25"tbl,10k RPM,24 ATC,MP-32,clnt thru,'02,#s3723

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Fadal #VMC5020, 50"x20"x25" trvl, 88HS cont,Xtended Mem, Rigid Tap,40-tpr,1996

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC5020A, 50x20x20",Cat 40,88HS,4th ax.tbl,rigid tap,30ATC,clt.thru,'98

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Fadal #VMC6030, 60"X,30"Y,30"Z, 10k RPM, 88 HS, 21 ATC, 22.5 HP, 1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC6030 CNC VMC, 60-1/2" x 30", 21 ATC, 88HS CNC, new 1995

Blackhawk Machinery Corp, Highland Park, IL 888-926-0050 (Fax866-248-8057) C. Perrelli

Fadal #VMC8030, 80"X,30"Y,30"Z, CNC 88HS, 21 ATC, CT40, 10K/RPM 1992

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Fadal #VMC8030, 80"x 30"x 30", 15 HP, CT40, 4th prewire, 10k RPM, 2000

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Famup #MCX-1000, CNC vertical machining center,Fanuc OM,24 ATC,43"X,20"Y,25"Z,#40 taper,10k RPM,twin pallets,1998

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Fanuc Robodrill #T14IB, 15k RPM,20x16x13",14atc,30 tpr,mist collect,pallet chgr,'01

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Fanuc Robodrill #T14ID, 20k RPM,20x16x13,14atc,#30 tpr,mist collect,pllt chgr,'05

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Fanuc Robodrillmate,Fanuc oi-mc,25.6x15.7"tbl,14pos.atc,10krpm,chickwrkhldg,'06

Belter Machinery, Rockford, IL 815-654-3300 (Fax 815-633-3969) Gary Belter

Fanuc #Tape Mate, CNC vertical machining center,Fanuc OM,10 ATC,20"X,15"Y,12"Z,6k RPM,2 pllts,Mecatool GPS 240 receiver,BT-30

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Feeler #FV600-APC, Fanuc OMC,(2)30x15"pllts,6k rpm,40 tpr,18atc,4th axis tbl,'91

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Feeler #FV-600, 24"X, 17.7"Y, 20"Z, 40 tpr, 18 ATC, 7.5 HP, 6k RPM, Anilam 6000i, '97, HB-18336

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Feeler #VB610, Fanuc OI CNC,43.4"X,4"Y,24"Z,22 ATC,30 HP,8000 RPM,brand new

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Feeler #VM40SA, Fanuc OI CNC,40"X,20.5"Y,20"Z, 24 ATC,25HP,10K RPM, brand new

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Femco #FV40, 43"X,22"Y,25"Z, 20 HP,10000 RPM,24 ATC,40 tpr,10 tools,used,1997

CNC Machine Sales, Orange, CA 714-335-5447 (Fax 714-538-5375) Chuck Gerrish

Femco #FV-40, CNC,Fanuc 18M,43"x22"x25",40"x20"tbl,24 ATC,BT40,10k RPM,20 HP,'00

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Femco #FV-40, CNC VMC,Fanuc 0M,CT40,43"X,22"Y,25"Z,24 ATC double arm, side mount,8k RPM,excellent,1998

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Femco #VMC-1685, VMC, 63"x 31.5"x 27.6", 32 ATC, BT 50, 4000 RPM

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Flow Flying Bridge #7XS-55 Waterjet

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Forest Line Majormill, 45 ATC,360"X,96"Y,36"Z,42 HP,3200 RPM,univ head,Fanuc15M,1990,#16770

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Fortune #V105, CNC VMC,Fanuc 18M,32 side mnt dbl arm ATC,41.3"X,22"Y,22"Z,BT40,full 4th axis with r/tbl,8k RPM,excellent,1999

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fryer #MB11Q, Combination CNC Bedmill w/Anilam 3000

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Fryer #MB14, 3-axis CNC vert.,14"x54"tbl,5 HP,PDB,Anilam 3300,Kurt vise,mint

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

Fryer #MC10, CNC Vertical Machining Center, 15 HP, 8000 RPM, 2006

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Fryer #VB40, CNC Open Machining Center

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Ganesh #4924, 8000 RPM, 24 ATC, CT40

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

G & L #10VS, 26"x54"tbl, 54"x, 30"y, 24"z, 48"ATC, 5000 RPM, Great Price

Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch

Giddings & Lewis #1400V, GE Fanuc OM, 29.5 x 17.7 x 17.7, Cat.40, chip conv.

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Giddings & Lewis #40VF, 480"X,80"Y,40"Z,110"U/R,96"throat,2200 RPM,80 ATC,1992

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

G & L #924-25VSP,50"x,40"yz,40 tls,#50 tpr,G&L8000B,(2)36"pllts,chngr,4000rpm,'86

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

H.H. Roberts #TW50-MCO, 50"X,22"Y,22"Z,Anilam 5300MK,20 ATC,15 HP,#40 tpr,'01

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

H.H. Roberts #TWE600, graphite,24"X,20"Y,8"Z, Anilam 1400M control,24k RPM,2001

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Haas #EC300, through spindle coolant, 12000 RPM, full 4th tbl,'06, Ref.#S6000699

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #GR-408, 50"x100"x11"tvls,20 HP,Cat.40,5000rpm,10 ATC,4th Axis,'08,#S6000366

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas Mini Mill, 10 ATC, 6000 RPM, USB, Cat 40, 2008, Ref #S6037309

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas Mini Mill, 4th axis ready, rigid tap, 2001

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas Mini Mill, vertical machining center, 16"X, 12"Y, 10"Z, 2002, #74452

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas Mini Mill, vertical machining center, 16"X, 12"Y, 10"Z, 2000, #74451

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas Mini Mill, 16"x 12"x 10" tvls, 6000 RPM,Cat.40 tpr,7.5HP,'05, Ref.#S6000682

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas Super Mini Mill #HRT 160, 15 HP, 15k RPM, 2002, Ref# S6018993

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas Super #VF-2SS, VMC, 30"x16"x20", 12k RPM, 1400 ipm, rigid, 4-axis, 2004

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Haas #TL-1, excellent condition, low hours, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #TM-1, VMC, 30"X, 12"Y, 16"Z, 10 station ATC, wireless probing, 2006

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #TM-1, CNC mill,10 ATC,4th Axis wired,Cat 40,rigid tap,coolant,excellent,'04

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Haas #TM-1, low hours, excellent condition, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #TM-2, 40"x16"x16",4000 RPM,BT40,20 ATC,7.5 HP,40GB hard disk,ethernet,'08

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #TM-2, 40"X, 16"Y, 16"Z, w/4th axis, Dual HA5C, 2004

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #VF-0, 20" x 16" x 20", 10000 RPM, 710 IPM, 20 ATC, 1997, #8218

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-0, 20"X, 16"Y, 20"Z, 7500 RPM, 20 HP, 20 ATC, rigid tapping, 1998 [20592]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Haas #VF-0, 20"X, 16"Y, 20"Z, 10000 RPM, 15 HP, 20 ATC, Haas ctrl, 1997 [20593]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Haas #VF-0, 20"X,16"Y,20"Z, 10000 RPM, 15 HP, 20 ATC, Haas ctrl, 1997 [20582]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Haas #VF-0, 10k spindle, high speed machining, 2001

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-0, 20"X,16"Y,20"Z, 10k RPM, rigid tap, 4th axis drive, 1996

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-0E, 10k spindle, C-package options, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-1, 26" x 14" T-slot tbl,30"X,16"Y,24"Z,750 lb.tbl.cap,Cat.40 tpr,5000 RPM,16 ATC,Haas CNC Ctrl.,full encl.,1991

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Haas #VF-1, 20"x16"x20", 7500 RPM, 20 ATC, rigid tap, 4th pre-wire, '97

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Haas #VF-1, 30"x 16"x 20",7500RPM,20ATC,Cat.40,rigid tap,prog.coolant, 4th axis,'95

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-1, Cat.40, rigid,floppy,20"x 16"x 20" tvl,20ATC,15 HP,'96,Ref#S6000564

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-1, Haas cnc control, 14" x 26" table, #40 taper, 20 atc, 2000

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #VF-1, machining center, 20"X,16"Y,20"Z,20 ATC,20 HP,4th Axis prewire,1998

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-1, 7500 RPM, 20 ATC, school machine very low hours, 2000

Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Fax 540-344-3830) Dave Gauvin

Haas #VF-1, 7500 RPM, 20 ATC, school machine, very low hours, as new,2000

Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Fax 540-344-3830) Dave Gauvin

Haas #VF-1,20x16x20",7500 RPM,Cat. 40,21 ATC,10 HP,RT,pre-cool,QC,auger,1996

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

2005 Haas VF-1, 7,500RPM, 24ATC, 20" x 16" x 20", CAT40, 20HP, Ref# S6037326

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-1, 20" x 16" x 20", rigid tapping, 1996

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Haas #VF-1, 20" x 16" x 20", prog. coolant, chip auger, quick code, 1999

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-1, C-package options, 2000

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-1, 20"x 16"x 20"travels, Haas CNC, Cat 40, 7500 RPM, 4th axis, 1994

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #VF-10, #50 taper, 7500 RPM spindle, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-10, 120"X,32"Y,30"Z tvls,40 taper,7500 RPM,CTS,4th card, gear box, 1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-2, 36"x 14"T-slot tbl,30"X,16"Y,24"under spdl,750 lb.tbl.cap,Cat.40 tpr,7500 RPM,16 ATC,Haas CNC Ctrl,full encl,1992

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Haas #VF-2, Machining Center, 30"X, 16"Y, 20"Z, 20 ATC, 10 HP,auto lube,'93

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-2, 7500 RPM,30"x16"x20",20 ATC,Cat 40,rigid,chip auger,2000,#s6019041

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-2, 30"x16"x20",gear drive,4th axis ready,rigid tap,20 ATC,floppy,1996

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-2, 30"x16"x20",20 ATC,gear box 7500RPM,40 tpr,prog.coolant,Quick Code,'96

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-2, 7.5 HP,7500 RPM,30"x16"x20",auger,Cat.40,20ATC,4th wire,'04,#6000439

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-2, 7500 RPM, Cat 40, 20 ATC, coolant, 1993

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

2006 Haas VF-2, GB, 7,500RPM, 24ATC, Rigid, 4th Wire, 1MB, P-Cool, Auger, Ref#S6037328

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-2, 30" x 16" x 20", rigid tapping, 1994

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Haas #VF2, Haas ctrl,30"x16"x20",Carousel tl.chgr,710 IPM,10hp,10k rpm,Cat.40,'94

Morris Rezman Machinery Co, Elk Grove Village, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

Haas #VF-2, 30"X, 16"Y, 20"Z, Vertical Machining Center, rigid tap, auger

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #VF-2, 30"x16"x20",10K spindle,15 HP,2 speed gear box,rigid tap,1996

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VF-2, C-package, thru spindle coolant, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-2, 30"x16"x20",10000rpm,20hp,2-spd.gearbox,memory upgrade,quickcode,'98

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Haas #VF-2, Side mount, 7500 RPM auger, P-Cool, 4th axis ready, 2003

Jamestown Machinery Inc, Jamestown, PA 724-932-2674 (Fax 510-740-3589) John Krygowski

Haas #VF-2, 30"x 16"x 20", 4th card, R.T., scaling, cool, auger, 2005

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-2B, 2-speed gear box, 24+1 ATC, 30"x 16"x 20", 2005

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Haas #VF-2DYT, w/4th. axis, 30" x 20" x 20" Travels, 40 Taper, 7,500 RPM, 2008

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #VF-2SS, like new, very low hours, 2007

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-2SS, 30"X, 16"Y, 20"Z, Vertical Machining Center, 2005

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #VF-3, 40"X,20"Y,25"Z,CTS,4th card,7500 RPM,20 ATC,rigid tap,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-3, 40"x20"x25", 7500 rpm, 20 ATC, chop conv,48"x18" tbl., 1996

DiPaolo CNC Retrofit Ltd, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

Haas #VF-3, 40"x, 20"y, 25"z, 7500 rpm, 20 atc, 1993, clean, low price [21404]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Haas #VF-3, 40"X,20"Y,25"Z, 7500 RPM, 20 ATC, rigid tap, Cat 40, 15 HP, 1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-3, 40"x 20"x 25",7500 RPM,15 HP,20 position ATC,enclosure,1993,#8511

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-3, CNC ctrl, 40"X,20"Y,25"Z, 20 position ATC, 10000 RPM, 1999

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Haas #VF-3, 18"x48",32-bit 4th axis control,40"X,20"Y,25"Z,#40 taper,15/20 HP,#25225

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Haas #VF-3, 7500RPM, 40"x 20"x 25" trvl,20 HP,Cat.40,TSC,USB, 2008,Ref.#S6000661

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-3, 40"x20"x25", 7500 RPM, 15 HP, chip auger,programmable coolant,1994

Jamestown Machinery Inc, Jamestown, PA 724-932-2674 (Fax 510-740-3589) John Krygowski

Haas #VF-3, side mount, loaded with options, excellent, low hours, 2006

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-3, 40"x 20"x 25",clnt.thru spdl,7500 RPM,chip auger,rigid tap,1997,#8498

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-3, 40"X, 20"Y, 25"Z, #40 tpr, rigid tap, 7500 RPM, TSC, tooling, 1997 [21383]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Haas #VF-3, Haas CNC,40"x20"x25",7500 RPM,rigid tap,coolant thru,gearbox,1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #VF-3, 40"x 20"x 25", 7500rpm, 2-speed gearbox,rigid tap,p-coolant,1997,nice

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Haas #VF-3, 40"x 20", 20HP,gear box,7500RPM,pallet chgr,bank repo,2000,Exc.

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Haas #VF-3, 40" x 20" travels, 7500 RPM, CT40, 20-tool, 15 HP, chip auger, 1996

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Haas #VF-3APC,20 ATC,20 HP,7500 RPM,Cat.40,auger,40"x20"x25",2008,#5999633

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-3APC, 40"X,20"Y,25"Z,(2)18"x48"pallets,7500 RPM,4th wired,rigid tap,'97

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-3M, 18"x48",40"X,20"Y,25"Z,#40,4th x,0-7500 RPM,15/20 HP,8"4th x rotab (25224)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Haas #VF3SS, 40"x 20"x 25"trvls,Haas HRT 210HS rotary,chip auger,TSC1000,2008

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF4, 50"X, 20"Y, 25"Z, #40 taper, 7500 RPM, 20 ATC, 1999

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

Haas #VF-4, CNC mill,Haas ctrl,50"x20"x25",21 ATC,7500RPM,rigid tap,prog.clnt,'99

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Haas #VF-4, 50"X,20"Y,25"Z,24 ATC,#40 taper,rigid tap,4th prewire,1998

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-4, Haas 32-Bit CNC, 50"X, 20"Y, 25"Z, 32 ATC, #40, 10000 RPM, 30HP, '98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Haas #VF-4, Linier scales, loaded with options, 2003

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-4, 50"X, 20"Y, 25"Z, low hours, 4th ready, 2004, #74118

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #VF-4, 50" x 20"x 25", 7500 RPM, 4th ready, P-Cool, auger, 1996

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Haas #VF-4, vertical mill machining center, full 4th axis, 10000 rpm, rocker arm tool changer, excellent, 2000

Hallidie Machinery Co Inc, Auburn, WA 253-939-9020 (Fax 253-939-9019) Scott Hanson

Haas #VF-4APC, automatic pallet changer, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-4APC, 4th axis,remote jog,rigid tap,auger chip convy,coolant tank,'00

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-4D, 50" x 20" x 25", 20 HP, 20 ATC, 2001

Sierra Victor Industries, Port Orange, FL 386-304-3720 (Fax 386-304-3722) Sam Valenzisi

Haas #VF-5, 50"X,26"Y,25"Z,4-axis,24 ATC,10k RPM,40 HP,HSM,chip auger,2001,#17994

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5, 50"X,26"Y,25"Z,4-axis,24 ATC,10000 RPM,40 HP,Haas CNC, 2000,#17996

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5, C-package, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-5, side mount Haas CNC,prog.clnt,chip auger,rigid tap,7500rpm,20 HP,'00

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-5/40, 20 ATC, 20 HP, chip, 50"x 26"x 25", 2001,#6000150

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-5/40, 23"x 52"table, 50"X, 26"Y, 25"Z, 40/30 HP, 24 ATC, 10k RPM, Haas CNC (25719)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Haas #VF-5/40, parts warranty July 2010,20 HP,chip auger,p-cool,SMTC,2009,#s6019017

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-5/50, vertical machining center, 38"X, 26"Y, 25"Z, 2005, #74193

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #VF-5/50, vertical machining center, 38"X, 26"Y, 25"Z, 2005, #74356

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #VF-5B, 50"X,26"Y,25"Z, 4-axis, 24 ATC, 10k RPM, 40 HP, HSM, Haas CNC, 2002, #17993

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5B, 50"X,26"Y,25"Z, 4-axis, 24 ATC, 10k RPM, 40 HP, Haas CNC, 2002, #17992

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5B/40, 23"x 52"table, 50"X, 26"Y, 25"Z, 40/30 HP, 24 ATC, 10k RPM, Haas CNC (25716)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Haas #VF-6, 64"x 32"x 30", 7500 RPM, 20 ATC, 4th prewire, 1997

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Haas #VF-6, #50 taper, side mount tool changer, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-6/40TR, 12.2"dia.Integrated 5-axis trunnion tbl,clnt,dual arm tl.chgr,'07

Machinery Source LLC, Belvidere, IL 815-547-0990 (Fax 815-547-1631) Jeff Hassen

Haas #VF-6/50, 64"x 32"x 30", 5000 RPM, Cat.50, 30 HP, 20 ATC, 4th prewire, '97

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Haas #VF-6SS, 2 pallets,60"x30"x30",12k RPM,extended Z,TSC,Midaco APC,2006

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Haas #VF7, 84" x 32" x 30", 4th axis table, 32 ATC, 1998

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Haas #VF-8, low hours, excellent condition, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-9, C-package options, 10k spindle, 1999

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-9, 84"X,40"Y,30"Z, 10K RPM,30 HP, coolant thru spdl, 50 taper, 2007

G Q Machinery Inc., Farmingdale, NY 516-867-4040 (Fax 516-223-1195) George Q.

Haas #VF9/50, 84"X,40"Y,30"Z, 5-axis ready, TSC, Cat 50, Haas CNC, 2007, #19399

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VFOE, 20"x 16"x 20", 7500 RPM, #40 taper, 20 station ATC, coolant, 1996

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VFOE, 30"x16"x20",20 ATC,4th axis prewire,rigid tap,floppy drive,1998

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #VM-3 Mold VMC, Haas HS w/4th,40"x26"x25",12k RPM,24atc,30hp,auger,'08

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Haas #VR-11, 5-axis VMC,7500rpm,CT 40,rigid tap,chip auger,outrigger,1997/2002

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Hardinge / Bridgeport #VMC-XP3-1000, Fanuc 18iM,40"x24"x24",12k RPM,#40,CTS,'06

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge/Bridgeport #VMC1000XP3,40"x,24"y,24"z,12k rpm,Fanuc 18iMB,48 ATC,clnt,'06

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge #VMC1000, GE Fanuc Series OMD,40"x20"x20",Cat.40,wired for 4th,1999

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VMC1000II, GE Fanuc Sys II,40"x20"x20",clnt.thru spdl,Cat.40,chip conv,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VMC600, Hardinge Fanuc System II,20"x20"x20",Cat.40,wired for 4th,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VMC700, Fanuc 18M CNC control

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge #VMC-800, Siemens 810D ctrl,32"x20"x20",8000rpm,18hp,thru-spdl.cool,2001

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Heckert #FQW-560TNC, vertical machining center,54"X,28"Y,21"Z,vert/horiz swivel head,2240 RPM,25 HP,#17807

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Hermle #C40-U, vertical machining center, 2004

Machinery Source LLC, Belvidere, IL 815-547-0990 (Fax 815-547-1631) Jeff Hassen

Hermle #C40U, 5-axis,33.5"X,27.5"Y,19.7"Z,31.5"swivel table,18000 RPM,2004,#18648

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hermle #UWF1200H,5-axis,TNC425,31.5"x25"x20",4200rpm,Cat 40,32 ATC,1993-2010

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

Hitachi-Seiki Seicos #18M, 40"x, 20"y, 17.7"z, 30 atc, 12000 rpm

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hitachi-Seiki #VA40, 28"X, 16"Y, 18"Z, #40 Cat, 25 ATC, Fanuc 6M, 1982, (847)

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

Hitachi-Seiki #VA-40, CNC vertical machining center

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Hitachi-Seiki #VA-55II, Fanuc 1O,30 ATC,60"X,22"Y,22"Z,Cat #50,20"x65"table,1988

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Hitachi-Seiki #VK45,30"X,19.7"Y,19.7"Z,Meldas Seicos cnc,6k rpm,30 atc,'89(351006)

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Hitachi-Seiki #VK55, twin spindle,15 HP,40"X,22"Y,Seikos MII CNC,(2) 20 ATC,#15204

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #VK55, Seicos M2,X-1000m,Y-560mm,Z-560mm,30 ATC,22"x55"bed

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Hitachi-Seiki #VK55, 2 spindle, 40"x22"x22", (2)20 ATC, #50, 1988, #S26038

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hitachi-Seiki #VK55II, 4-axis vertical machining center, Seicos 10M control

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Hitachi-Seiki #VM40, 30"x16"tbl,6k RPM,7.5 HP,Cat 40,20 ATC,Series MII CNC,'89

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Hitachi-Seiki #VM40, 22"X,16"Y,16"Z,20 ATC,6k RPM,Seiki-Multi M CNC,1987,#15899

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hitachi-Seiki #VM40H, 22"x 16"x 16", 8000 RPM, 20 ATC, Yasnac MX-3, exc.

Teck Machine Tool Co, Tucker, GA 770-491-6066 (Fax 770-491-6913) Ryan Rhodes

Hitachi-Seiki #VM50, pallet changer,29.9"X,20.1"Y & Z,Cat 40,8k RPM,Siecos 10M,'98

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Hurco / Dynapath 100 #750ATC, 16"x 58"TWS,50"X,22"Y,24"Z,Dynapath 2000,#25907

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hurco #4020, vertical machine center, 40"x 20"x 24", 8k RPM, 24 ATC, rigid, 1997

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Hurco #40SLV, 40"x20"x25",#40 tpr,15 HP,24"x55"tbl,excellent,low hrs,1993,$11,875

Advance Products Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Hurco #BMC20, 24"x 14"x 16" (X,Y,Z) #40 tpr, 6K RPM, 16 ATC, Ultimax Dual Screen

Erickson Machine Tools Inc, Story City, IA 800-247-3905 (515-733-2929) Terry Lake

Hurco #BMC20, 13"x30"tbl,6k RPM,Ultimax III CNC dual screen,BT40,16atc,'94,#08240

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Hurco #BMC-20LR, 22"X, 16"Y, 20"Z, 40 tpr, 14 ATC, Ultimax 3 dual screen, 1992

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Hurco #BMC20LR, 24"x14"x16", Ultimax, 16 ATC, 6000 RPM

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Hurco #BMC30, Hurco Ultimax ctrl,30"X,20"Y,20"Z,#40 tpr,24 ATC,priced to sell,1990

Addy Machinery Co, Clinton Township, MI 586-741-3000 (Fax 586-741-3015) Jay Addy

Hurco #BMC30, 30"X, 20"Y, 20"Z, 30 ATC, Ultimax CNC dual CRT, #17507

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

Hurco #BMC30/SSM, Ultimax III Ctrl, 8000 RPM, 24 ATC, 1997

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Hurco #BMC3017, 30"x17"x24",24 ATC,#40,8k RPM,Ultimax carousel tool holder,1999

Advance Products Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Hurco #BMC30M, 30"X,18"Y,24"Z,8k RPM,Ultimax 3,24 ATC,rigid,10 HP,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hurco #BMC30M, Ultimax 3 ctrl,15"x 40" tbl, Cat.40, 8000 RPM,1995,#06235

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Hurco #BMC4020, 8000 RPM, 40"x 20", 20 HP, TSC, 24-sta.ATC, DXF, 3D Mold, 2000

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Hurco #BMC4020HT/M, Ultimax III CNC,40"X,20"Y,24"Z,24 ATC,6500 RPM,20 HP,1998

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hurco #BMC50, Ultimax II dual screen,#50 taper,20 ATC,52"X,30"Y,23.6"Z,1990

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

Hurco #MB3, Ultimax 2, 15"x 44"tbl,41"X,18"Y,20"Z,4000 RPM,24 ATC,1985, ID#5703

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Hurco #MD1VMC, dual screen CNC, 20 pos.ATC, #40, 1986 (8519)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hurco #VMX64/40 VMC, 65.98" X 35.04 Table, 63.98" X, 33.86" Y, 29.92" Z

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hurco #VMX64/40T, VMC, 64"x34"x30", 10k RPM, 40 ATC, probe, 2006

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Huron, high speed CNC, 10 HP, 20 ATC, 24000 RPM, 2000, #1406

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hwacheon Sirius 2, APC,dual pallets,Fanuc 18MC,22"X,16"Y,18"Z,6000 RPM,1999,#1122

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

Hwacheon Sirius II APC, 22"X,16"Y,18"Z, 8k RPM, Fanuc 18MC, 2 pallets, 1998

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Hyundai #SPT V-32/405, CNC VMC, Siemens control, 30 ATC, 40"X,28"Y,18"Z, 5000 RPM, tooling, manuals, 2001

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Ingersoll Buehle, AB 8200 or new CNC,118"X,106"Y,39"Z,49"x104"table,ATC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Ingersoll HVM dbl.col,236"x,118"y,53"z,2-197x98"pal,60atc,rgh/str/off.att,Fanc.15mb'99

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll Masterhead, traveling gantry,360"x,220"y,60"z,144"bh,84"ur,360° C,88-atc

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll Masterhead traveling gantry,360"x,220"y,60"z,144"BH,84"UR,360°C,88 ATC,'87

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll, AB 8200 or new CNC, 21'X,9'Y,40"Z,6 heads,98"x140"table,ATC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Johnford #1320A, 53"x,30"y,28"z,20hp,20 ATC,#50 tpr,Mits.Meldas 520,1995,#281216

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Johnford #DMC1200, Fanuc 18MC,8k RPM,24 ATC,Cat 40,2-spd.gearbox,chip conv.,'01

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Johnford #DMC1500H, 59.1"X,35.4"Y,30"Z, 24-ATC, 63"x 33" tbl,Fanuc 18MC,#S27603

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Johnford #DMC1500H, 59"x35.4"x30",8k RPM,40atc,#50 tpr,25hp,Fanuc 18iM-B,9/08

Benchmark Machine Tools, Tulsa, OK 918-234-8665 () Matt Reed

Johnford #DMC-2100, Fanuc 18iMB,83"X,70"Y,42"Z,24 ATC,10k RPM,505 cut hrs,'04

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Johnford #HSM45, 45"x,21"y,25"z,Fanuc 18MC,24ATC,Weiss 2400rpm Integral spdl,'00

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Johnford #SV24, 25.6"x20"x24",Fanuc OiMC,31.5"x17.7"tbl,25-8k RPM,21atc,'02.#351008

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Johnford #VMC-1024, 43"x18"tbl,40"X,20"Y,22"Z,6k RPM,#40 tpr,10 HP,24 ATC,'96

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Johnford #VMC1324A, 53"X, 30"Y, 28"Z, 4500 RPM, 24 ATC, 1996, #218158

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Johnford #VMC2020, 80"X,35"Y,28"Z, Fanuc OM, #50 taper, 20 ATC, 20 HP, 1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Johnford #VMC2020, 35.4"x80.7"x28",#50 tpr,3600rpm,20atc,Fanuc OM,1994,#8138

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Johnford #VMC2020, 120"X,35"Y,4-axis Fanuc O-M,24 ATC,under power,1999

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Johnford #VMC-500, vertical machining center, 24" x 16.1" x 14", 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Johnford #VMC-750, 3-axis vertical machining center, 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Johnford #VMC850, 20" x 32"travel, 6000 RPM, 16 sta. ATC, Fanuc OM CNC, 1995

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Kasahara #J610, Bridge mill, 24"x 40" table, #40 taper, 15 HP, 16 ATC

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Kasuga Quantum #Q-1000V, Fanuc 18M,#50 taper,42"X,24"Y,25.6"Z,30 ATC,1998

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Kasuga Quantum #Q1000V, VMC,Fanuc 18M,42x24x25.6",30 ATC dbl arm,6k RPM,exc,'98

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Kawasaki, travelling gantry drill,708"X,205"Y,thru tool coolant,Fanuc 15M,1997,#18298

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

K & T #VB-4, 40"X,22"Y,20"Z,68"x 24"table,#50 taper,4000 RPM,30 ATC,Gemini E CNC,#17811

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Kia #KV40A, Fanuc O-M, 18"x 36" tbl,18"Z,22"X,16"Y,Cat.40,20ATC,6K RPM,7.5HP,'91

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Kia #VA40, 28"X,18"Y,16"Z, Fanuc OM 4-ax, 8"rotary, Cat 40, 6k RPM, 1994

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Kia #VX500, Fanuc 0I MB, 47.2" x 19.7", 40 taper, 24 ATC

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Kingsbury #VMC600, 60"x50"x18",bridge style,8000 RPM,30 ATC,Fanuc 15i-M,2001

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Kira #KN40VA, dual pallet,Fanuc 21iM, 6K,12 ATC,19.7"x 13.5"x 15.7",2000,#3777

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Kira #KN40VA, 20"x14"x16",2-pallet,24"x14"tbls,6k RPM,10 HP,Fanuc 21IM,2000,#8538

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Kira #KN40VA-2APC, Fanuc 21i, in/mm conv,14 station ATC,auto lub,2006

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Kitamura Mycenter #1, 19.9x14x16",10k RPM,BT85,20atc,dual pllt,Fanuc OM,'95 (2)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Kitamura Mycenter #1, Fanuc OM,19"x13"x16",10k RPM,BT 35 tpr,20 ATC,rigid tap,1989

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Kitamura Mycenter #1, Fanuc OMC, 20"x 14"x 16",BT-35,13K RPM,20ATC,rigid tap,'97

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Kitamura Mycenter #1, Yasnac I-80, 20" x 14" x 16", 13000 RPM, 20 ATC, 1995

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Kitamura Mycenter #1, 20"X,14"Y,16"Z, 13k RPM, BT35, rigid tap, Fanuc OM, 1993

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Kitamura Mycenter #1/485, 19.1"X, 19"x13"x16"travels, Fanuc 0M CNC, 1990

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Kitamura Mycenter #1/APC, 19x13x16",BT35,20 ATC,Fanuc OM,plt chgr,'92,#jv17466

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Kitamura Mycenter #2, 16.1"x 35.4"table, 20 ATC, excellent, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Kitamura Mycenter #2XI-F, w/Sparkchanger, Fanuc 16iMB, 24 ATC, 2003, #1448

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Kitamura Mycenter #3X, Fanuc 0M,10k RPM,rigid tap,gearbox,coolant thru,(3) avail.

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Kitamura Mycenter 3X CNC VMC, 10K RPM, 1997, Yasnac i80 cont,conv,Clnt,30/18/18

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Kitamura Mycenter #3XL-ATC, 30"x 17.9"x 18.1", 30 ATC, 1969 ipm (x,y), 2000

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

Kitamura Mycenter #4X, 44"x22",30atc10k RPM,geared hd,box ways,Yasnac I80,2000

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Kitamura #4XIF, F16IM, 40"X, 20"Y, 20"Z, 20K RPM, CTS, 40 tap., 40 ATC, 2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Kitamura Mycenter #5, CNC vertical machining center,Fanuc OM,40 ATC,43.3"X,21.6"Y,22.4"Z,#40 taper,25 HP,1990

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Kitamura Mycenter #5X, CNC vertical machining center, 1993/1994, #48430

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Kitamura Bridgecenter 8, Fanuc 15M,80"X,42.7"Y,27.9"Z,3,500 RPM,#50 tpr.,1996

Haider Machinery Inc, Eden Prairie, MN 952-975-4975 (Fax 952-975-4977) Gary Haider

Kiwa #510 Colt, Fanuc OM, 10k RPM, 20"X,16"Y,18"Z, Cat 40, 16 ATC, 1991, #1144

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

Kiwa Japan Triple #V21I, 2-pallet CNC,2360 IPM,15 HP,Cat.40 tpr,Fanuc 18i-MB,#1424

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Kiwa trpl #V21i, Fanuc18i-MB,(2)32.3x17.7"tbl,24x16x20",12k RPM,2360ipm,24atc,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Komo #40/240, Cat 40, 10000 RPM, 48 ATC, Fanuc 16MB, 240"X, 1998

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Komo #50/120, 122"x36"cap,32"x120"table,118"X,36"Y,32"Z,3500 RPM,1995,Stk#9820

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Komo #VM-40, vertical machining center, Fanuc 16M CNC ctrl, variable pallet zone system, long X-axis travel 96", 30 ATC, 1996

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Komo #VMC144, 20"x144"table,144"X,20"Y,15"Z,10k RPM,#40 taper,10 HP,1993

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Lagun #3516, 30"x16"x20"travels, #40 taper, Dynapath CNC, 1997, #944130

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Lagun #3516, 16"x 35"tbl,Autocon Dynapath Delta,BT40,60-5000rpm,7.5hp,'95,#09095

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Lagunmatic #VMC3516, 24"X, 16"Y, 20"Z, 1996

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Leadwell #MC-760XL, 29"X,20"Y,20"Z,20 ATC,#40 taper,10 HP,Fanuc 6M-B,1984,#384M

Machine Tools Direct Inc, Carlisle, PA 717-240-0557 (Fax 717-240-0558) George Ferguson

Leadwell #MCV1000 AP,Fanuc OMF,44x20"tbl,43.3x24x20"trvl,20atc,CT40,8k RPM,'92 (2)

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Fax 817-834-4075) Mike Frost

Leadwell #MCV-1000 AP, 5-axis w/indexer,#40 tpr,6k RPM,GE Fanuc 16MB,chip,1995

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

Leadwell #MCV1000P, 40"x20"x20",15 HP,6k RPM,BT40,24 ATC,Fanuc OM,#ck-17686

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Leadwell #MCV-1300S, 52"X,30"Y,22"Z,Fanuc OMF,Cat 40,6k RPM,30 ATC,20 HP,1993

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Leadwell #MCV550D, 21.65"x, 14.14"y, 20.07"z, Fanuc 0M, w/SMW pallet changer (2995)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #MCV-550S, Fanuc 10M,21.65"X,16.1"Y,21.85"Z,20 HP,16 ATC,BT40 taper,1985

CNC Machine Sales, Orange, CA 714-335-5447 (Fax 714-538-5375) Chuck Gerrish

Leadwell #MCV6102, 4"x, 16"y, 20.4"z, Fanuc 0M, w/SMW pallet changer w/2 pallets (2992)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #MCV610CR, 24"X,16"Y,20"Z,35"x20"tbl,8k RPM,Cat 40,24 ATC,Fanuc OM,'96

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Leadwell #MCV-760AP, Fanuc OM control,30"x 20"x 20",24 ATC,rigid tapping,1994

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Leadwell #MCV-OP, 20"X,14"Y,16"Z,Mits.Meldas 310M CNC,16 ATC,#40 taper,1991

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Leadwell #V40, 40.2" x 20.1" x 20.1" travels, fanuc oi mc, 8000 rpm, 2008

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Leadwell #V50, Fanuc 18M,50"x20"x24"trvl,20atc,8k RPM,Midaco Series 50 pllt chgr

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Fax 817-834-4075) Mike Frost

Leadwell #V60, Fanuc 18M,60"x30"x24"trvl,24atc,8k RPM,Midaco Series 60 pllt chgr

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Fax 817-834-4075) Mike Frost

LeBlond Makino #FMC60, 18"x 32" tbl, 10000 RPM,20 ATC,Fanuc OMC,4th axis index

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

LeBlond Makino #FNC74, Fanuc 11M,27.5x17.5x17.5",Cat 40,auto shift,4th ax. indexer

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

LeBlond Makino #SNC106, Graphite VMC,dual pallet,41"X,23"Y,22"Z,15k rpm,BT40,'93

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

LeBlond Makino #SNC106-A5, 39"X,23.6"Y,15.7"Z,Graphite pkg,Pro A CNC,#40 tpr,'96

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

LeBlond Makino #SNC-64, 23.6"X,15.7"Y,15.7"Z,Makino Pro-A CNC,15 ATC,1993,#18936

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

LeBlond Makino #SRC64-A5, 30" x 16" table, 75 HP, 12K RPM, 15-tools, 1993

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Liechti, 5-spindle, 5-axis, CNC turbine blade / airfoil mill

Strategic Solutions For Indus, Westport, CT 203-227-2808 (Fax 203-222-0128) Casey Mulqueen

Maho #MH600E, CNC horizontal & vertical machining center, universal mill,#2039

R.P. Machine Enterprises Inc, Statesville, NC 704-872-8888 (Fax 704-872-5777) R. Piselli

Makino #A77,(2)25"pllt,32"x30"x32",full 4th axis,40ATC,10k Rpm,Fanuc 16mb Pro3,'95

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino Hyper #5, 24"x16"x16",32000 RPM,20 ATC,30"x16"table,1996,#S26414

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino #S56, 35.4"X,19.7"Y,17.7"Z,20 ATC,13000 RPM,Cat 40,Makino Pro 3,2003,#18263

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Makino #S56, 35.4"X,19.7"Y,17.7"Z, CT40, 13k RPM, 20 ATC, twin arm, 1574 IPM, 2004, #DK-18585

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Makino #S56, 35.4"X,19.7"Y,17.7"Z, 20 ATC, 13000 RPM, Makino Pro 3 CNC, 2003, #18285

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Makino #S56, Pro 5, 35" x 20" x 18", 13K RPM, 20 ATC, 2007

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Makino #SNC106-a30, 39.37"X, 23.62"Y, 15.75"Z, vertical machining center, 1998

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Makino #V55, 35.4"X,19.7"Y,17.7"Z,25 ATC,14k RPM,30 HP,TSC,Pro-3 CNC,1999,#18937

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Makino #V55, 35"x 16"table, 25 HP, 14000 RPM, 25-tools, Pro 3 control, 1997

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Mandelli #8UT, Siemens 840C,55"X,43"Y,45"Z,ISO 50 twin spdl,6 pllt changer,160atc

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Masco, 5-side bridge mill,Fanuc 16i,185"X,100"Y,50"Z,(2)72"x120"pallts,twn ATC

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Matsuura #510VF, ridgid tap,Kitagawa Mac-Mini-I ('07) w/triple rotarys, 1993 (2)

American Machinery Co Inc, Newtown, CT 203-335-1153 (Fax 203-426-2747) Bill Buckens

Matsuura #760VX, w/Kitagawa Mac-Mini-I twin rotarys, full 4th, nice, 2007

American Machinery Co Inc, Newtown, CT 203-335-1153 (Fax 203-426-2747) Bill Buckens

Matsuura #MAM72-63V, Fanuc 30i CNC, 29.92"x33.27"x24.02",Cat.40,12K RPM,22 HP

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Matsuura #MC-1000V, vertical machining center,47.24"x19.685"T-slot tbl,40"X,20"Y,20"Z,BT45 tper,3025 RPM,30 ATC,Fanuc 300C

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Matsuura #MC-1000V, 41"X,20"Y,22"Z,Tsudakuma rotary,Fanuc 11M4X,box ways,1985

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Matsuura #MC1250VSS, 50"x 25", 12K, 50 ATC, CT-50, full guard, super, 1992

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Matsuura #MC500, CNC Vertical Mill, 20"X,14"Y,18"Z, 10-tools, video, 1984

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Matsuura #MC500-V2DC, 20"X,14"Y,17"Z, Yasnac MX-1 CNC, (2) 20 station ATC, 1985, #18620

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #MC-500V-DC, twin spindle,Yasnac MX-2,6k RPM,20"X,BT 35,7.5 HP,clean

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Matsuura #MC-510, 14"x20"trvls,6k RPM,20 ATC,BT-35,Yasnac MX3,rigid tapping,1991

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Matsuura #MC-510 VG, Ysnc J300, 15k, Cat 40, 30 ATC, 5-Axis, 20"x14.1"x18.1", TS Clnt '98

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Matsuura #MC-510VD, 15" x 30"t able, 20 ATC, 4th axis ready, 1998

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Matsuura #MC-510VF, Yasnac,20"x14"x18",8k RPM,7.5 HP,BT40,20 ATC,rigid tap,1995

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Matsuura #MC-510VF, Yasnac i80, 5-Axis, Tsudakoma TRNC151 Tbl, 15K, Cat 40, 30 ATC, 1995

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Matsuura #MC-510VF, 5-axis w/Tsudakoma TRNC-151 2-axis full 5th axis

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Matsuura #MC-510VF, 8000 RPM, full guard, rigid tap, Yasnac i80, 1994

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Matsuura #MC-510VG, 5-axis Yasnac J300 CNC control, 15000 RPM spindle

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Matsuura #MC560V, 4-axis,22"x15.7"x17.7",BT-40,30-7k RPM,20atc,MX-3,full encl.,'87

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Matsuura #MC-600, 23"X,16"Y,18"Z,4th axis Trunion,(2) 30 ATC,twin spindle,#40 tpr

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Matsuura #MC-600V, MCV, 23"X,16"Y,18"Z, Yasnac MX-3, 1990

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Matsuura #MC760V, 30"X,16"Y,19"Z,Yasnac M5,BT 40,25 ATC,10 HP,tooling,1981

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Matsuura #MC760V-DC, twin spdl,(2) 25 ATC,BT-40,30"x16"x19",(2) Haas indexers,'84

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Matsuura #MC-760VX, VMC, 30"X, 16"Y, 18"Z, Yasnac MX3, 1989

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Matsuura #MC800VG, Yasnac J300,31.5"X,20.08"Y&Z,30 ATC,BT40,1000 RPM,30 HP,'98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Matsuura #MCV-800, 4th axis, Tsudakoma rotary

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Matsuura #RA3FDC, 31.5"x17"x19",2 pallets,2 spdl 8k RPM,30 ATC,#40 taper spdls

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Matsuura #RA-4F, (2) 19"x39"pallets,8k RPM,Yasnac CNC,tooled,1994,#09005

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Matsuura #RA-4G, 40"X,22"Y,20"Z,2-APC,30 ATC,15000 RPM,Yasnac J300 CNC,2000,#17517

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #RAII, 20"X,16"Y,18"Z,7k RPM,20 ATC,dual pallets,rigid tapping,1989

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Matsuura #RA-II, pallet changer,23.6"X,16.1"Y,18.5"Z,BT40,7k RPM,Yasnac MX3,'88

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Matsuura #RA-II, Vertical Machining Center, 23.63"X, 16.13"Y, 18.44"Z, 1991

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Matsuura #RA-II, CNC Vertical Mill, 24"X,16"Y,18"Z, Video, 1988

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Matsuura #RA-IIF, Yasnac CNC control, 30 ATC, 1992, #1494

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Matsuura #RA-III-F, 29.92"X,17.30"Y,17.71"Z,(6) 31.50"x 16.50"pallets,30 ATC,1997

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Matsuura #VMC-1000, Yasnac MX2,47"x20"tbl,40"x20"x20"trvl,BT40,15 HP,6k RPM,'86

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Fax 817-834-4075) Mike Frost

Matsuura #VMC-RA-II-DC, twin spdl,2-pallet,23.6"x16.1"x18.5"trvl,(2) 20 ATC,MX3 ctrl,1991

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Matsuura #V-Plus 800 vertical machining, 12000 RPM, Big Plus spindle, 2003

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

Matsuurai #MC1000VS, 40"x,20"y,20"z,50 ATC,Fanuc CNC,20 HP spindle motor,6k RPM

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV-25/404N, 39.4"X, 20"Y, 18"Z, 6000 RPM, pallet changer, M-32, 1994 [21458]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Mazak #AJV32/404, M-32,39.4"x 27.56"x 18.1,4000 RPM,30 ATC,probe ready,1988

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak #AJV35/60, 59"X,31.5"Y,20"Z, 60atc,3150rpm,(2)29x69" pllts,Mazatrol M32

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV-35/60, 59"x,32"y,20"z,60atc,3150 RPM,(2) 29"x69"pllts,CTS,Maz.M32,'89

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV60/160, 2 APC,640M,(2)55"x129"pllts,166",55",23",10k RPM,120 ATC,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #FJV-250, 40"x 20"x 18", 12000 RPM, 30 ATC, 4th Axis, CTS, 1998

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak #FJV60/160, (2) 54"x128"tbls,165"x55"x23",120atc,10k rpm,50hp,'01,#28662

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Mazak Hypersonic 1400L, 165"X,55"Y,23"Z,158"x49"tbl,20k RPM,30 ATC,Fanuc 15i 2001

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Hypersonic 1400L, 165"X,55"Y,23"Z,20k RPM,30 ATC,Fanuc 15i,2001,#s27726

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Micro-Center #V-5, CNC vertical machining center,Fanuc 7M,30"X,15"Y,8"Z,24 ATC,#40 taper,5 HP,1982

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Mazak #MTV-414/32, 22"x16"x18",36"x16"tbl,Cat 40,24 ATC,10 HP,Mazatrol M-Plus

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mazak #MTV515/40, 21"x 51"table,Mazatrol M32B,4th axis,20 HP,1994,#08420

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Mazak Powercenter #SV20AVMC, pallet chngr,48.8"x23.6" surface,Cat.#50,20hp,#1402

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mazak #SV25E, 29-1/2" x 108"table, Mazatrol Cam 2, 40 tool, excellent

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

Mazak #SVC2000L, 120"X,20"Y,20"Z,133"x 20"table,Mazak 640M CNC,30 ATC,2005,#19465

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Mazatech #V-10 VMC, 30"X,19"Y,20"Z, 4500 RPM, Cat 40, 60 tool ATC, 1987

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mazak #V100, Mazatrol M32, X/Y/Z 197"x138"x140",Cat.50,50HP,4K RPM,TSC,1990

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak #V10N, 40"x 20"x 20", machining Center, 30 ATC, 15 HP, Fanuc 6M,1985

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave

Mazak #V10N, 40"X,20"Y,20"Z, Cat. 40, 4500 RPM, 30 ATC, M-32A, 1989

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #V12, Fanuc 6MB,#50,20 ATC,20"x 48"table,4th axis,12 HP,clean,1983

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

Mazak #V15,55.1"x26.7"tbl,40"x,20y",30z",14-2000rpm,#50mmt,20atc,15hp,id #12148

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak #V15D CNC VMC, 94.4"x 36.6" tbl,14-2000 RPM, #50 MTM, 15 HP mtr, #13777

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak #V-15N, Cam M-2 control, 24"x68"table, 40 ATC, 4th axis, 1983

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

Mazak #V414, 4th Axis, 24 ATC, Maz.32MB, 22"X, 16.14"Y, 18.11"Z, 10 HP, Cat.40

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Mazak #V414/32, M-Plus,coolant thru,41"X,20"Y,22"Z,30 ATC,7k RPM,rotary tbl,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #V515N-2APC, M-Plus,40",20",22",6000 RPM,30 ATC,30 HP,factory 2 pllts,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Vari-Axis #630, 5-axis, 80TC, 12000 RPM, 2 pallets, Fusion control, 2005

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak Vari-axis #630-5X, twin pallets, Fusion control, 12000 RPM, 80 tool, 2003

Richard Lunt Machinery, Seattle, WA 206-763-1390 (Fax 206-767-9825) Richard Lunt

Mazak Versatech #V100, Machining Center, 197"X, 138"Y, 40"Z,1988, Mazatrol M32

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #VNC510ii, 4th axis, 12000 RPM, probing, Matrix control, 2007

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mazak #VQC15/40, 22"x16"x15",16"x35"table,6k RPM,CT 40,30 ATC,Fanuc 11M,1987

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mazak #VQC-15/40, CNC vertical machining center,Maz.Cam M-2,22"X,16"Y,15"Z,10 HP,#40 taper,6000 RPM,1988

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Mazak #VQC-20/40B, 40"X,20"Y,18"Z,30 ATC,6-pallet stacker,chip conveyor,1987,#17456

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #VQC20/50A, Mazatrol M2, 25"X, 20"Y CNC conv. control w/CRT, clnt, Cat #50, #15526

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #VQC20/50B, Mazatrol ctr, 39"X, 20"Y, 18"Z, 24 ATC, 3150 RPM, 1985(11840)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak #VQC20/50B, 22"x49"table, bridge type, Mazatrol cam M-2, 24 ATC

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

Mazak #VQC20/50B, M-2 ctrl,#50 taper,40"X,20"Y,18"Z,24 ATC,probe,toolsetter,1987

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak #VTC16A, 22" x, 1994, mazatrol m32b, 35" x 40", cat 40, 8,000 rpm, 20 atc, fob prese

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mazak #VTC16B, M-Plus,#40 taper,44"X,16"Y,20"Z,24 ATC,8k RPM,ATCM,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC16B, 44"x 16"x 20", Mazatrol control, 24 ATC, 8k RPM, 1997

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Mazak #VTC16B, 44"X,16"Y,20"Z,24 ATC,7k RPM,15 HP,Cat 40,Mazatrol M32B,1994,$24,500

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC16B, 44" x 16", 7000 RPM, CT40, 24 tool, 15 HP, 1996

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Mazak #VTC-16B, CNC vertical machining center,Maz.Cam M-2,22"X,16"Y,15"Z,10 HP,#40 taper,6000 RPM,1996

Deal Makers Machinery, Thousand Oaks, CA 805-498-0703 (Fax 805-498-0653) Harvey Youngman

Mazak #VTC16C, 65"X,16"Y,20"Z,Mazatrol M32B,(2) 24 ATC,Cat 40,7k RPM,'95,#47449

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak #VTC-16C, 65.4"X,16.1"Y,20.8"Z,Cat 40,(2) 24 ATC,M32B,7000 RPM,1995

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #VTC200B, 44"X,20"Y,23"Z, Mazatrol 640MPC Fusion CNC, Cat 50, 24 ATC, 2000, #17727

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #VTC200B, 44"X,20"Y,20"Z,40 tpr,10K rpm,24atc,650 Fusion CNC,clnt thru,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC-200B, CNC vert. machining center, Cat 50, 20 HP, #1370

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mazak #VTC20B, 44"X,20"Y,20"Z,Maz.M32B,24 ATC,7k RPM,#40 taper,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #VTC20B, 44"X,20"Y,20"Z, Mazatrol M Plus, 24 ATC, 8K RPM, #40 tpr,1997

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Mazak #VTC20B, 44"X,20"Y,20"Z, Mazatrol M Plus, 24 ATC, 8K RPM, #40 tpr,1998

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Mazak #VTC20B,44"X,20"Y,20"Z,57"x20"tbl,8000 RPM,24-atc,Mazatrol M Plus,1998

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #VTC20B, Mazatrol M-Plus CNC, 44"X,20"Y,20"Z, 7000 RPM, 24 ATC, 1998

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mazak #VTC20B, 44"x 20"x 20", 24 ATC, Cat.40, rigid, 1997, #5999594

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak #VTC20B, Mazatrol M Plus, 44"X,20"Y,20"Z, 15 HP, 20.08"x 57.4"tbl.

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mazak #VTC20C, M-640 Fusion,8k RPM,65"X,20"Y,20"Z,(2) 24 ATC,#40 tpr,15 HP,1999

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC30C, 65.35"X,29.92"Y,26"Z,15 HP,8k RPM,Cat 40,21 ATC,Maz.M-Plus,'98

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mazak #VTC30C, Mazatrol M-Plus control, 78.74" x 29.92" table size, 24 ATC, 1998

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #VTC30C, 65"x,30"y,26"z, 8k rpm,15 hp, cat 40, (2)24 atc,(2)atl, Mazatrol Mplus'1998

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC41, table 16"x35", 24ATC, Mazatrol EIA control, column type, '91

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

Mazak #VTC41L, 65"X,16"Y,20"Z, Cat 40, (2) 24 ATC, Mazatrol EIA, 1993

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #VTC41M, 44"X,16"Y,20"Z,7000 RPM,Maz EIA,24 ATC,15 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mighty Comet #VMC3000G, 122"X, 59"Y, 28"Z, #50 Taper, Meldas Ctrl.

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mighty Comet #MV5, Meldas 520A ctrl,30"X,20"Y,20"Z,5 HP,3850 RPM,indexer,1996

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mighty Comet #VMC100G, 21"x41"tvls,#50 tpr,16 tls.ATC,22 HP,chip conv,'97,#8273

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mighty Comet #VMC500P, 20"X, Mitsubishi M3, Cat 40, 6000 RPM, 16 ATC, 1994, fob: Mn

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mighty U.S.A. #VMC1250P/G, 54"x,28.5"y,24.5"z,59"x29",4k rpm,20hp,20atc,50 tpr,'93

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mighty Viper #1500P, 60"X,28.5",24.5"Z,50 tap,6K RPM,20 ATC, Tooling, 1996

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mighty Viper #500P, 20x16x16",#40 tpr,6k RPM,16atc,10hp,Meldas M3A,'94,#hb-17096

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Mighty Viper #950, Mits. 980A, 40" x 20" x 20", 20 ATC, 8K RPM, 2000

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Mighty Viper #VMC-1600, 63"x 31", 24 arm ATC, 8k, Mits., like new, 2000

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Mikron Agie #HSM400, high speed,Heidenhain ITNC 530 CNC,15"x17"x13"trvls,2004

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Mikron #HSM400, 15.76"X,17.73"Y,13.79"Z, Heidenhain control, 2004, #73817

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mikron #HSM600U, 5-axis, 32"X,24"Y,20"Z, 7 APC, 60 ATC, Heidenhain CNC, 2004, #18250

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mikron #HSM600U, 5-axis, TNC 530, 31.4"X,23.6"Y,19.7"Z, 36000 RPM, 7-pallet, 2004

G Q Machinery Inc., Farmingdale, NY 516-867-4040 (Fax 516-223-1195) George Q.

Mikron #HSM700, 35"x22"table,27"X,22"Y,17"Z,42k RPM,12 ATC,24 HP,1997,#1149

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mikron #HSM800, TNC 530,31.5"X,23.62"Y,19.68"Z,36k RPM,HSK-E50,4 APC,probe,'03

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

Mikron #UCP1000, Cat.40, 5ax, 15k rpm,30 atc,Heidn. TNC426PB,39"x39"x25", 1999

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Milltronics cnc mill & tooling, 7.5 hp, 240 volt

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Milltronics Partner 1, 12"x40",Centurian V,15 HP,~500 RPM,25"X,16"Y,20"Z,1995

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Milltronics Partner 10, 100"X,30"Y,24"Z,#40 tpr,Centurian V,12 ATC,10k RPM,'96

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Milltronics Partner 10, Series J Centurian V CNC, 24" x 110", 1996

Blackhawk Machinery Corp, Highland Park, IL 888-926-0050 (Fax866-248-8057) C. Perrelli

Milltronics Partner 1E, 24"x16"x16.5",4500 RPM,#40 tpr,6 ATC,Centurian 5 ctrl,#8836

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Milltronics Partner 1G, Centurion V, 25"X,16"Y,20"Z, 12 ATC, 6k RPM, 1994

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Milltronics Partner 1J, 25"x 16", 6k RPM, 12 ATC, conv.CNC, nice, 1996

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Milltronics Partner 6, 30"x 24"x 24"travels,CT40,color LCD,ATC,updated ctrl

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Milltronics #RH33, 78"X,33"Y,28"Z,24 HP,24 ATC,Centurian 7,#40 tpr,2006,#281220

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Milltronics #RH33, rigid head mill, Centurion 7 Ctrl,78"X,33"Y,28"Z,24 ATC,2007

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Milltronics #VM20ILXT, 40x20x26"tvl,45x20"tbl,Cat 40,24atc,Milltronics 7200 ctrl,'08

Machinery Source LLC, Belvidere, IL 815-547-0990 (Fax 815-547-1631) Jeff Hassen

Milltronics #VM24, Centurion 6 ctrl, 40"X, 24"Y, 24"Z, 6K RPM, 20 HP,1998

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Milltronics #VM24, 4-axis,Centurion 6,40"x"24"x24",2k RPM,Troyke rotary,clean,'01

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Milltronics #VM25XP, linear way machining,50"x25"x24"trvl,50 tpr.HS,chip conv,'07

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Mitsubishi #MPA-V65, 49"X,25.6"Y,25.6"Z, 24 ATC, Control NAPII

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh

Mitsubishi #M-V5B, CNC vertical machining center, 1997

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Mitsubishi #M-V60C, Mits 330 CNC,40"X,23.6"Y,21.7"Z,24 ATC,#50 tpr,6k RPM,1991

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mitsubishi #MV65C, 49.2" x 26" x 25.6", 3-axis, vertical machining center

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Mitsubishi #MV-70EN, 27"x 65"table,60-6000 RPM,40 ATC,HP coolant,1999,#08073

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Miyano #KSV-31, Fanuc OM,25"X,16"Y,18"Z travels,6000 RPM,10 HP,18 ATC,1992

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Miyano / Kira #KSV-50, Fanuc OM CNC,41"X,22"Y,20"Z travels,Cat 50,24 ATC,1991

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Miyano #TSV25, Fanuc OM, 6K RPM, BT30 Tpr, Rigid Tap, Coolant, 12 ATC, 1990

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Modern #VM-1300, Fagor 8055MCB,23.6"x51"tbl,32 ATC,51"x25.5"x22",10k RPM,15 HP

Modern Tool Ltd, Calgary, AB 403-236-1150 (Fax 403-236-4277) Mark Senecal

Monarch #PMC-V750, 29.5"x17.7"x21.7", 22 ATC, 8000 RPM, 35 HP, good, 1989

Superior Machinery, Burt, MI 989-770-4827 (989-770-4873) Keith McKay

Monarch #VMC150, Fanuc 0M, 30"x 70"travels, 15 HP, 3500 RPM

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Monarch #VMC150, CNC,33-1/2"x 78"table size,45-3500 RPM,Fanuc 15M,1991,#13563

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Monarch #VMC-150, (2) 30"x 60"pallet,50"X,30"Y,26"Z,30-3500 RPM,Fanuc 15M,1991

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Monarch #VMC150B, 50" x 30" x 24", Fanuc 15MF, Machining Center

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Monarch #VMC-175B, 76"X, 30"Y, 44"Z, Cat 50, 30 HP, Fanuc 16M, 30 ATC, CTS, 1995

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Monarch #VMC75, 20"x 40"x 25", 20 ATC, 12"4th axis rotary table, GE 2000 ctrl

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Monarch #VMC75, 40"X,20"Y,24"Z, 40 ATC, Cat 50, TSC, Fanuc 15M, 1996, #17935

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Monarch #VMC-75, 40"x 20"table, 40"X, 20"Y, 20"Z, 40 tools, #45ASA tools, 3500 RPM, #8869

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Monarch #VMC75B, 40"x20"cap.,27.5"x54"tbl,40"X,20"Y,24"Z,6k RPM,18HP,#50 tpr,'92

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki CNC VMC, pallet changer, #50 Cat, 30-positions, to 4000 RPM, #1484

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mori-Seiki #CV500A, vertical machining center,20.08"X,Y,Z, 21.7"x 29.5"twin pallet

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mori-Seiki Dura #5100, 40"x20"x20", 10K RPM,30 ATC,TSC,chip,some tooling incl, 2007

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #F-M1, 22"X, 16"Y, 18"Z, Fanuc MSX-501, 1999, #74203

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki Frontier #M1, MSC521,8k RPM,20 ATC,40 tpr,22 HP,22x16x18",'96/97 (2)

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #M300, CNC dual pallet vertical machining center,15"x 13"x 19",1992

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #M300 Partner, Fanuc OMC, 10K spdl,10 HP, 20 ATC, CT-40,15"x 11"x 19"

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #M300 Partner, Fanuc 10M, 10k spindle, 7.5 hp, 20-tools, ct-40, 15x11x19

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #M300A1, Fanuc 10M, Cat 40, 20 ATC, indexing table

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Mori-Seiki #M-300L2, (2)21"x32"tbl pllts,63"X,19.7"Y,18.5"Z,10 HP,#40 tpr,'91

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki #M300L2/1600, 2-pllt,88.58"X,19.69"Y,18.5"Z,Fanuc 16MC,30 ATC,BT 40,'98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Mori-Seiki #MV35/40, Yasnac MX-1, 30"x 13.8"x 17.7", 6k RPM, 20 ATC, 1985

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #MV35/40, vertical machining center, 130-6000 rpm

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Mori-Seiki #MV35-40, CNC VMC,Fanuc 11M,30"X,16"Y,18"Z,BT40,20 ATC side mount,6000 RPM,10 HP,excellent

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #MV40, CNC, 32"x16"x21",10hp,20 ATC,Yasnac ctrl,8k RPM,4th axis tbl.

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #MV-40, CNC vertical machining center, 32"x 16"x 21"travels, 1990

CNC MACHINERY & EQUIPMENT:MACHINING CENTERS, VERTICAL, CNC

CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, VERTICAL, CNC